Hubbry Logo
Rope bedRope bedMain
Open search
Rope bed
Community hub
Rope bed
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Rope bed
Rope bed
Rope bed
View on Wikipedia
from Wikipedia
A rope bed without its mattresses etc.

A rope bed is a type of platform bed in which the sleeper (and mattress) is supported by a lattice of rope, rather than wooden slats.

In cold climates, a rope bed would be topped with one or more insulating paillasses or bedticks, which would traditionally be stuffed with straw, chaff, or down feathers. It might also have a canopy hung with warm curtains.[1][2] Modernly, they may be topped by a thin futon (a form of bedtick) or other roll-up mattress[3] (see mattress topper).

In the sixteenth century (England?), bedmats of woven or plaited rush were often laid on the widely-spaced ropes, and the bedticks were laid on the mats. This stopped them from bulging between the ropes.[4]

Rope beds need to be tightened regularly (with a bed wrench, and sometimes with wedges) as they sag. They must also be re-strung occasionally; re-stringing reduces sag and evens out wear.[5][3][6] When fully or partly unstrung, rope beds can be packed flat for transport.[3] The need to tighten bedcords has been said to be the origin of the English phrase "sleep tight",[4] but some etymologists disagree.[7]

  • Medieval-reconstruction rope beds (circa 1465); note loops of rope protruding from side boards
    Medieval-reconstruction rope beds (circa 1465); note loops of rope protruding from side boards
  • A rope bedframe thought to have belonged to William Shakespeare
    A rope bedframe thought to have belonged to William Shakespeare
  • Bedclothes pulled back to show the bedcords of the 1590s Great Bed of Ware
    Bedclothes pulled back to show the bedcords of the 1590s Great Bed of Ware
  • Touchable museum samples illustrating the layers of the Great Bed of Ware: the bedcords, a plaited-rush[8] bedmat, a flockbed and then a featherbed in dun ticking, a downbed in striped ticking, and the bedlinen.[4] Flock is unspun fibers, in this case probably wool. The bedticks stuffed with the softest fillings are laid topmost.
    Touchable museum samples illustrating the layers of the Great Bed of Ware: the bedcords, a plaited-rush[8] bedmat, a flockbed and then a featherbed in dun ticking, a downbed in striped ticking, and the bedlinen.[4] Flock is unspun fibers, in this case probably wool. The bedticks stuffed with the softest fillings are laid topmost.

See also

[edit]
A rope-base murphy-bed, 1740–90, United States. In use, the upper frame would suspend a canopy and curtains, which would hide the bed entirely when it was folded and make it a lit à demi-ciel when unfolded

Media related to Rope bedframes at Wikimedia Commons

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Rope bed

View on Grokipedia
from Grokipedia
A rope bed is a type of platform bed featuring a wooden frame with a supportive lattice woven from ropes, upon which a or is placed, providing flexible suspension without the use of slats or springs. The design traces its origins to ancient civilizations, with one of the earliest known examples being the rope-supported bed discovered in the of around 1323 BCE, demonstrating the use of interlaced cords for bedding support in early Egyptian culture. In medieval , rope beds appeared in various forms, as evidenced by artistic depictions such as the Andrews from circa 900 AD and the Saffron Walden bed frame from the late 14th to early 15th century, which featured flat-sawn wooden elements combined with lacing for portability and comfort. By the , rope beds had become a staple of American household furniture, particularly in log cabins and middle-class homes, serving as the primary sleeping structure before the widespread adoption of metal frames and coil-spring mattresses in the late 1800s. These beds were typically constructed from hand-turned hardwoods like , measuring around 48 inches wide by 72 inches long, with pegs or holes spaced approximately 6 inches apart along the side rails to secure the ropes, which were woven first vertically and then horizontally to create a taut grid. involved periodic tightening of the ropes using a specialized tool known as a bed key, as the natural fibers would stretch over time, ensuring ongoing support for layered mattresses filled with , feathers, or .

History

Origins in Medieval and

The rope bed, a type of platform bed featuring a wooden frame with a supportive lattice of interlaced ropes in lieu of rigid slats, first appeared in during the late medieval period, with portable variants emerging prominently in the 14th and 15th centuries for use by , travelers, and merchants. These designs provided a flexible yet durable sleeping surface that could be easily adjusted for tension, making them ideal for transient lifestyles in pre-industrial societies. Archaeological and artistic evidence underscores their early development, including the Andrews , an early 9th-century Carolingian from now in the . A 12th-century French gaming piece depicting the biblical scene of Judith and Holofernes, housed in the Louvre . By the late 14th to early , flat-sawn versions appear in surviving artifacts, such as the bed frame in England's , radiocarbon-dated to approximately 1450–1480 CE and featuring rails designed for . These beds were particularly suited to Europe's cold climates, where their open lattice allowed air circulation but was often augmented with insulating paillasses—straw- or feather-stuffed mattresses—and overhead canopies to trap warmth and protect against drafts. Portability was a key feature, with frames crafted for quick disassembly; such hinged or pegged constructions, typically from durable woods like or , facilitated use by elites on the move while maintaining structural integrity.

Spread to Colonial America and Adaptations

Rope beds, originating from medieval European prototypes where ropes supported bedding on wooden frames, were introduced to the by European colonists in the . English settlers brought them to , as early as the 1607 founding, with archaeological evidence of iron bed bolts—used to secure frames against sagging ropes—recovered from James Fort, indicating their use among high-ranking gentlemen despite the harsh conditions of the settlement. In frontier households, particularly log cabins of the 17th and 18th centuries, rope beds underwent adaptations to fit limited spaces and available resources. Designs often integrated rails directly into log walls via auger holes, with a single corner post extending from floor to ceiling for support, allowing the bed to hug the cabin's structure and maximize room for other uses. These modifications, sometimes called "jack beds," used fewer free-standing elements compared to full four-poster European versions, making them ideal for compact pioneer dwellings. Frames were commonly constructed from local hardwoods such as for everyday use or for more affluent households, sourced from abundant American forests to replace imported . Hybrid designs emerged through interactions with Indigenous bedding practices, incorporating elements like corn husk-filled mattresses laid over the rope lattice, which provided a softer, locally available alternative to European straw or feather ticking and drew from Native American use of natural fibers for comfortable sleeping surfaces. During the (1775-1783), rope beds gained prominence for their portability in military encampments; officers, such as those at Neilson's Farm during the 1777 , used them as camp cots, valuing their lightweight assembly and disassembly for rapid marches, though they were cumbersome compared to later innovations.

Decline and Legacy in the 19th Century

By the mid-19th century, the advent of mattresses, patented in 1871 by German inventor Heinrich Westphal, marked a significant shift in technology, driven by the Industrial Revolution's advancements in and . These innerspring designs offered superior support and durability compared to lattices, which required frequent manual tightening to prevent sagging, leading to their rapid decline in urban households where modern manufacturing was accessible. beds faded by the 1870s in cities, supplanted by iron and frames paired with springs, though they persisted in rural areas into the late due to limited access to industrialized goods and traditional craftsmanship. Documented 19th-century rope beds in museums illustrate the final refinements before widespread obsolescence, such as a hand-turned bedstead from circa 1840 at the Bartow-Pell Mansion Museum in New York, featuring intricate spindle work and pegged rope supports that reflect peak colonial adaptations in -style furniture. Another example is an early 19th-century rope bed from , currently on display at the Concord Museum, which highlights the transition period with its wooden frame and woven rope base, demonstrating how these beds evolved minimally before being overtaken by spring innovations. The legacy of rope beds endures in cultural phrases like "sleep tight," first recorded in American usage in 1866, popularly attributed to the need for tightening bed ropes but subject to etymological debate, as "tight" more likely meant "soundly" or "well" in 19th-century English without direct reference to mechanics. In the , rope beds influenced historical recreations in pioneer museums, such as those at the Job Carr Cabin Museum in , where functional replicas educate visitors on frontier life, and the Madison-Morgan Cultural Center in Georgia, preserving examples to showcase 19th-century domesticity.

Design and Construction

Frame Structure and Variations

The basic frame of a rope bed consists of four vertical posts, typically crafted from such as or , connected by horizontal side rails that form the primary support structure. These posts, often turned or intricately carved for both functionality and decoration, anchor the assembly, while the side rails feature rows of bored holes or inserted pegs spaced approximately 6 to 10 inches apart to facilitate attachment and ensure even across the sleeping surface. Headboards and footboards, sometimes present at the ends, provide additional enclosure and aesthetic detail, with overall dimensions for a standard full-size measuring about 6 to 7 feet in length and 4 to 5 feet in width to accommodate one or two adults. Historical variations in rope bed frames reflect adaptations to environmental, social, and practical needs across regions and eras. In medieval Europe, portable designs with hinged or folding components allowed for disassembly and transport, making them suitable for travelers, soldiers, or those in transient households. During the colonial American period, particularly in settings, frames were often simplified and integrated directly into the home's structure, with two side rails anchored into adjoining walls and a single corner post extending from floor to ceiling to enhance stability in low-ceilinged spaces. By the , among wealthier households, four-poster variations emerged with taller posts supporting elaborate canopies or testers for protection from drafts and insects, often featuring ornate carvings on the posts and rails. These frame designs prioritized durability, with robust capable of supporting typical household loads when properly assembled, though exact capacities varied by construction quality.

Roping Methods and Techniques

The primary method for roping a historical rope bed involves diagonal or crisscross of through or around pegs in the bed's side rails, beginning at one corner of the headboard and alternating directions to achieve even tension across the surface. This lattice pattern distributes weight evenly, preventing sagging when supporting a or . The process typically starts by soaking the overnight to increase pliability, then forming a loop at the first or peg on the upper right corner of the headrail, stretching it taut to the corresponding point on the footrail, and securing it before proceeding to the next pair of points in a crisscross manner. In medieval English techniques, roping often employed continuous loops threaded through bored holes spaced approximately 6 to 10 inches apart in the rails, creating a simple lattice that could be laced spirally around crosspieces for added stability. This method, evident in surviving examples like the Saffron Walden bed from the late 14th to early , emphasized durability for portable or fixed frames, with the forming interlocking diagonals to form a supportive without separate knots at each . By the colonial American period, adaptations included side-to-side threading styles, particularly in simpler designs, where was run horizontally across the width multiple times before vertical passes, often wrapping around pegs on the rail tops to simplify installation and maintenance. Essential tools for roping include a bed wrench, also known as a straining wrench or Spanish windlass, used to tighten the rope by twisting eyelets, pegs, or wedges counterclockwise for secure tension, often requiring an assistant to hold the line taut during weaving. An awl or nail may assist in holding temporary tension while tying double half-hitch knots at cross points. Rope length calculations for a full-size bed (typically 54 by 76 inches) generally require 100 to 150 feet, accounting for multiple lengthwise and widthwise passes, shrinkage during drying, and extra for ties, with measurements taken between attachment points to ensure coverage. Early weaving patterns favored a simple lattice of single-layer crossings for basic support, as seen in medieval English beds, while later 18th- and 19th-century reinforced double-layer techniques added interwoven horizontal and vertical ropes—sometimes wrapping around two pegs per attachment—to enhance resilience under heavier loads and reduce long-term sagging. These patterns interlace the initial lengthwise runs with perpendicular side-to-side strands, optionally over and under for a tighter grid, ensuring the final surface remains flexible yet firm.

Materials Used

The frames of rope beds were constructed from durable hardwoods to endure the constant tension exerted by the supporting ropes. In medieval and early modern Europe, oak was the predominant choice due to its robustness and widespread availability in local forests. In colonial America, more accessible woods such as pine and walnut prevailed, reflecting regional timber resources and cost considerations. Regional variations included cherry wood in the Pennsylvania Dutch country, prized for its fine grain and workability in furniture crafting. To enhance longevity and protect against moisture and insect damage, frames were frequently finished with linseed oil, which penetrated the wood grain to form a natural sealant. The ropes forming the bed's supportive lattice were selected for their tensile strength and flexibility, with materials evolving over time based on availability and performance. Prior to 1800, hemp and linen (derived from flax) were the standard choices, offering high strength while remaining relatively absorbent to moisture. These natural fibers provided reliable support but required careful handling to prevent rot. Post-colonial adaptations introduced manila rope, made from abaca plant fibers, which proved more resistant to weathering and degradation. For optimal tension and even weight distribution, ropes were sized to fit securely through the frame's attachment points. Historically, ropes for beds were often sourced as byproducts from the sailing industry, where was cultivated extensively for and sails, with surplus or worn cords repurposed for household use. In colonial settings, was grown locally or imported to meet demands for both maritime and domestic applications. Regarding durability, and ropes typically lasted 1-2 years under daily use before fraying or sagging necessitated replacement, though variants extended this period due to enhanced resistance to abrasion.

Usage and Maintenance

Historical Bedding and Comfort

In historical contexts, rope beds relied on layered bedding to achieve a measure of comfort over the taut but uneven rope support. The foundational layer was a paillasse, a coarse sack filled with straw or chaff, which formed a firm base directly atop the ropes to distribute weight and prevent direct contact with the webbing. Over this, a wool or feather tick—a stuffed mattress—added insulation and cushioning, with feathers preferred for their softness among those who could afford them. In 16th-century England, households often placed woven or plaited rush mats between the ropes and paillasse to create a smoother surface and avoid the mattress bulging into gaps between the cords. Additional adaptations improved the overall sleeping environment. Canopies, or testers, suspended from the supported heavy curtains that provided in shared spaces and retained against drafts in unheated rooms. In humid regions, the elevated structure of beds—typically raised 12 to 18 inches off the —promoted beneath, reducing moisture buildup and enhancing ventilation during warm nights. Daily routines centered on preparing the bed for use, including smoothing the ropes to eliminate wrinkles and fluffing the ticks by hand to redistribute or feathers evenly and prevent lumps. These setups typically accommodated one or two sleepers, offering an initially firm yet resilient surface that molded slightly over nights for better conformity to the body. Without rush mats, however, the experience could feel uneven, with pressure points from the ropes potentially causing discomfort over prolonged use.

Tightening and Long-Term Care

Maintaining the tension in a rope bed's supporting lattice was essential to ensure comfort and prevent excessive sagging, a common issue due to the natural stretch of hemp or linen ropes under repeated use. The tightening process typically involved using a bed key—a wooden or metal tool designed to twist the rope loops—inserted into the exposed sections of the ropes along the bed's side rails. Starting from one end of the bed, the key was turned counterclockwise to draw the ropes taut, progressing sequentially across the frame to maintain even tension; this counterclockwise motion effectively shortened the rope segments by coiling them tighter around the pegs or eyelets. In historical households, this adjustment was performed weekly, often as a routine chore before bedtime, to counteract the nightly sag from body weight, particularly in beds shared by multiple family members during colder months. For long-term preservation, ropes required periodic replacement to avoid fraying or weakening, which could compromise the bed's support. Historical practices recommended re-stringing the entire annually with fresh or rope, a labor-intensive task that involved removing the old lattice and a new one through the frame's holes, sometimes followed by boiling the ropes to eliminate pests like bedbugs. To prevent on ropes, especially in humid environments, gentle with mild and water was advised, followed by thorough airing in ; inspections for wear should occur every three to six months, focusing on signs of rot or abrasion at the peg points. The ritual of tightening the ropes each evening became a familiar household duty in 18th- and 19th-century America and , with the phrase "sleep tight" sometimes attributed to this practice of ensuring the ropes held firm overnight for a secure rest. Bed keys, often crafted from for 18th-century models, were commonplace tools in these homes, underscoring the ongoing maintenance integral to rope bed functionality.

Common Issues and Repairs

Rope beds commonly experienced sagging due to the natural stretching of their or ropes under repeated weight and movement, resulting in an uneven support surface that compromised comfort over time. Wooden frames were also susceptible to cracks from seasonal drying and shrinkage, particularly at joints or end grains, as fluctuations in caused the wood to contract unevenly. For minor rope wear, tightening was the primary repair method, achieved by inserting a bed key—a specialized hardwood wrench—into the peg holes along the side rails and turning it counterclockwise to draw up slack while an assistant held the rope ends to maintain tension. This process, often performed periodically, helped restore tautness and prevent further sagging; ropes were secured with double half-hitch knots at the cross pieces to ensure stability. In cases of severe stretching or deterioration, full re-roping was required, entailing the complete removal of old ropes followed by threading approximately 100 feet of new 3/8-inch twisted manila or period-appropriate hemp rope in an interwoven lengthwise and widthwise pattern, with knots tied at each end and tension adjusted progressively. Frame repairs focused on stabilizing cracks and loose joints without altering the original structure. Small splits were addressed by injecting reversible hide glue into the crack, then clamping the pieces together until set, often after cleaning debris with a soft or . For weakened joints, reinforcement involved drilling holes and inserting wooden dowels or pegs, typically square in shape for mortise-and-tenon connections, followed by gluing and clamping; this method preserved the 's historical integrity while restoring load-bearing capacity. Tools commonly used included a bed key for ropes, hide glue and clamps for wood elements, and dowels cut to fit snugly. To prevent issues, historical practices emphasized regular tightening routines to mitigate and maintaining indoor relative between 35% and 60% to minimize shrinkage and cracking.

Cultural Significance

Role in Daily Life and Symbolism

In colonial American households, beds including formed a core part of sleeping arrangements, often accommodating multiple individuals in multi-person setups due to spatial constraints and communal living practices common until the mid-19th century. Entire , including parents and children, frequently shared a single or , reflecting the practical necessities of pioneer and life where was limited and resources were scarce. Beyond routine rest, beds including rope beds played a pivotal role in key domestic events, serving as the primary site for , the ill, and in homes lacking specialized medical facilities. In these settings, the bed facilitated intimate caregiving activities, with women and midwives attending to births and recoveries directly on the surface, underscoring its multifunctional centrality in and reproduction. Elaborate four-poster beds, often featuring rope supports, carried significant symbolic weight, denoting and economic prosperity among the wealthy elite. Ornate designs with fine textiles and carvings transformed the bed into a visible of affluence, often displayed in parlors or main chambers to impress visitors and signal household hierarchy. The recurring need to tighten the supporting ropes to avoid sagging gave rise to the enduring cultural "sleep tight," popularly linked to this maintenance ritual for ensuring firm support, though etymological evidence traces the phrase's first recorded use in 1866 to meanings of secure or sound rather than literal rope adjustment. dynamics further shaped the place of beds like rope beds in daily routines, with women in 17th- and 18th-century households bearing primary responsibility for domestic tasks such as preparing and maintaining bedding. This role aligned with broader expectations of female , encompassing , cleaning, and ensuring family comfort amid the beds' frequent adjustments. References to beds including rope types appear in late 18th-century American diaries and domestic literature, emphasizing their unadorned practicality as essential fixtures in modest homes, where they provided reliable, if rudimentary, support for rest and recovery.

Modern Reproductions and Interpretations

In the 20th and 21st centuries, rope beds have been reproduced for educational and decorative purposes, often incorporating modern adaptations for practicality. Museums such as maintain examples like a low post bedstead dating to 1740–1770, strung with rope to demonstrate 18th-century sleeping arrangements in the House exhibit, where the design allows for easy disassembly and transport. These reproductions emphasize historical accuracy while using durable materials to withstand public display. Contemporary reproductions frequently employ synthetic ropes, such as or , in DIY projects to enhance longevity and resistance to stretching compared to traditional or . For instance, instructional resources detail weaving 8mm rope across frames for portable medieval-style beds, providing a flexible yet supportive surface suitable for home assembly. Such adaptations appear in historical reenactments, where artisans recreate beds to replicate the elastic lattice that supported early mattresses, offering authentic insight into pre-industrial sleeping . Modern applications extend to eco-friendly and minimalist furniture design. Rope beds crafted with natural fibers like , , or promote , as these renewable materials biodegrade and require minimal processing, serving as alternatives to resource-intensive metal frames. The Palecek Woodside bed, for example, features hand-woven natural rope on a base, highlighting environmental benefits in coastal-inspired interiors. In minimalist setups, these beds pair with low-profile futons for versatile, space-efficient arrangements that evoke simplicity without compromising support. Scholarly examinations of rope beds focus on their ergonomic properties, noting that the interlaced s initially offer adaptive support by conforming to body contours, distributing weight evenly across the frame. However, long-term use risks sagging as ropes stretch under repeated tension, potentially leading to reduced spinal alignment over time—a factor that contributed to their historical maintenance routines. In the 2020s, renewed interest in sustainable has positioned rope-inspired designs as viable alternatives to metal coil springs, aligning with broader trends toward supports that minimize environmental impact while providing breathable, chemical-free sleep surfaces. Commercial options from artisans typically range from $500 to $2,000, depending on size and materials, with many including instructions for home roping and assembly to customize tension. European suppliers like Medieval Market offer rope beds at approximately €605 (around $650 as of ), complete with oiled finishes and pre-cut ropes for straightforward setup. These pieces appeal to collectors and eco-conscious consumers seeking functional homages to historical craftsmanship. Rope bed designs also appear in non-Western cultural contexts, such as ancient Egyptian and some indigenous African traditions using interlaced cord supports for , highlighting their global historical significance in daily life and symbolism of rest and community.

References

  1. https://www.kentdelordhouse.org/artifact-corner-19th-century-rope-bed/
  2. https://mobiliermedieval.org/2016/11/22/rope-beds-reconsidered-research-and-reproduction-of-a-portable-medieval-rope-bed-part-one/
  3. https://www.jobcarrmuseum.org/blog/log-cabin-living-rope-bed
  4. https://www.mmcc-arts.org/all-news/rope-bed
  5. https://whitebearhistory.org/maple-rope-bed/
  6. https://collections.vam.ac.uk/item/O94187/the-andrews-diptych-diptych-unknown/
  7. https://collections.louvre.fr/en/ark:/53355/cl010097109
  8. https://www.saffronwaldenreporter.co.uk/news/25296955.saffron-walden-museums-bed-frame-dated-back-15th-century/
  9. https://historicjamestowne.org/collections/artifacts/bed-bolts/
  10. http://www.oldandinteresting.com/jack-beds.aspx
  11. https://www.saatva.com/blog/history-of-mattresses/
  12. https://www.nps.gov/places/tour-stop-2-neilson-s-farm.htm
  13. https://egohome.com/blogs/craftsmanship-and-materials/who-invented-mattresses-the-origins-and-innovations
  14. https://mansionmusings.wordpress.com/2023/03/04/an-elaborate-pile-of-comfort-making-the-bed-in-the-days-of-horsehair-straw-and-feathers/
  15. https://www.youtube.com/watch?v=IGoXYaDIE80
  16. https://www.phrases.org.uk/meanings/sleep-tight.html
  17. http://www.colonialsense.com/How-To_Guides/Interior/Bed_Roping.php
  18. https://www.heritagesociety.org/texas-beds
  19. https://countrybedshop.com/services/upholstery-and-polish-service/
  20. http://daviddfriedman.com/Medieval/Articles/rope_bed/rope_bed.htm
  21. http://welldressedtent.com/bed.php
  22. https://www.harpgallery.com/p/cherry-antique-1840-empire-full-size-poster-rope-bed-pennsylvania/30872
  23. https://vermontwoodsstudios.com/pages/linseed-oil
  24. https://research.colonialwilliamsburg.org/foundation/journal/Winter15/hemp.cfm
  25. https://www.electricemperor.com/eecdrom/TEXT/TXTCH02.HTM
  26. https://bkeithropemaker.com/Rope_Chapt_1.html
  27. https://digital.lib.ecu.edu/13995
  28. https://www.ebohemians.com/what-is-a-rope-bed-a-comprehensive-guide/
  29. https://www.nps.gov/subjects/museums/upload/MHI_AppN_WoodObjects.pdf
  30. https://collectionsconversations.wordpress.com/2014/05/27/good-night-and-sleep-tight-re-stringing-a-19th-century-bed/
  31. https://pendletontimes.com/early-american-bedding-was-of-simple-materials/
  32. https://www.thewadsworth.org/bed-furnishings-in-early-america-an-intimate-look/
  33. https://www.fosters.com/story/news/local/2016/07/20/treasure-81-colonial-rope-beds/27459681007/
  34. https://blogs.libraries.indiana.edu/wyliehouse/2018/01/18/sleep-tight-dont-let-the-bed-bugs-bite-a-myth-debunked/
  35. https://www.thoughtco.com/women-at-work-early-america-3530833
  36. https://www.gutenberg.org/files/22675/22675-h/22675-h.htm
  37. https://artsandculture.google.com/story/explore-the-george-wythe-house-colonial-williamsburg-foundation/CQVh1D1gDf2zdg?hl=en
  38. https://medieval-market.com/en/furniture/513-rope-bed.html
  39. https://www.kathykuohome.com/Product/Detail/21909-Palecek-Woodside-Coastal-Beach-Natural-Rope-Bed-Queen
  40. https://www.webbingstyle.com/blog/Introduction-to-rope-woven-material-furniture_b7879
Add your contribution
Related Hubs
Contribute something
User Avatar
No comments yet.