Ferrari 641
View on WikipediaFerrari 641/2 (chassis 117) | |||||||||||
| Category | Formula One | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Constructor | Ferrari | ||||||||||
| Designers | John Barnard (Technical Director) (initial design) Steve Nichols (Technical Director) Pierguido Castelli (Technical Coordination Director) Enrique Scalabroni (Chief Designer) Henri Durand (Head of Aerodynamics) Paolo Massai (Engine Department Director) | ||||||||||
| Predecessor | 640 | ||||||||||
| Successor | 642 | ||||||||||
| Technical specifications[1] | |||||||||||
| Chassis | Kevlar and Carbon fibre composite monocoque | ||||||||||
| Suspension (front) | Double wishbones, push-rod actuated torsion bar springs, and telescopic shock absorbers, anti-roll bar | ||||||||||
| Suspension (rear) | Double wishbones, pushrod actuated coil springs over telescopic shock absorbers, anti-roll bar | ||||||||||
| Engine | Ferrari Tipo 036 3.5 L (213.6 cu in), 65° V12, NA, mid-engine, longitudinally mounted | ||||||||||
| Transmission | Ferrari 7-speed semi-automatic | ||||||||||
| Power | 680 bhp (507 kW; 689 PS) @ 12,750 rpm | ||||||||||
| Fuel | Agip | ||||||||||
| Tyres | Goodyear | ||||||||||
| Competition history | |||||||||||
| Notable entrants | Scuderia Ferrari SpA | ||||||||||
| Notable drivers | 1. 2. | ||||||||||
| Debut | 1990 United States Grand Prix | ||||||||||
| First win | 1990 Brazilian Grand Prix | ||||||||||
| Last win | 1990 Spanish Grand Prix | ||||||||||
| Last event | 1990 Australian Grand Prix | ||||||||||
| |||||||||||
The Ferrari 641 (also known as the Ferrari F1-90)[2] was the Formula One racing car with which the Ferrari team competed in the 1990 Formula One World Championship.
Development
[edit]The 641 was a developed version of its predecessor, the 1989 Ferrari 640, designed by John Barnard. The updated 641 design was overseen by former McLaren designer Steve Nichols after Barnard left Ferrari to join the Benetton team, once the car's development was complete. The car was powered by a 3.5-litre V12 engine, first with the type 036, and later in San Marino with the updated 037. The V12 was rated at 680 bhp (507 kW; 689 PS), only slightly down on the 690 bhp (515 kW; 700 PS) Honda V10 engines used by McLaren, but not as flexible or as good at delivering power out of slow corners as the Honda, the Renault V10 engine used by Williams or the Ford-Cosworth HB V8 used by Benetton. Despite its heavier engine, the 641 was among the best handling cars on the grid. Prost declared it the best car of the year.[3]
The Ferrari 641 was also the first Formula One car to use an effective traction control system, which debuted at the 1990 Portuguese Grand Prix in Estoril; less than two years before a traction control system debuted on the eventually highly successful Williams FW14B. Ferrari technicians sat down on the Tuesday after the Italian GP on September 11, and developed a rudimentary traction control system, which debuted in Portugal less than two weeks later. The system was relatively simple and straightforward; using just some software and a wheel speed sensor.[4]
Incorporating the semi-automatic gearbox developed during the previous season, the car was seen to be technically advanced. The aerodynamics were reworked and the chassis gave a slightly longer wheelbase than its predecessor. Nichols designed the car with Alain Prost’s smooth driving style in mind. Prost worked hard on improving the reliability of the gearbox and also worked behind the scenes to bring the whole Ferrari team closer together. A variable inlet trumpet system on the engine was tested throughout the season but did not become standard equipment.
Racing history
[edit]Ferrari's major coup was signing reigning World Champion Prost from McLaren to partner Nigel Mansell. The car scored six wins in the 1990 season (Prost five, Mansell one).

Prost's development work helped the 641 chassis to be extremely fast and competitive, and he scored five wins, including a remarkable victory from 13th place on the grid in Mexico, and challenged his nemesis Ayrton Senna for the championship. In the same race, Mansell outfoxed Gerhard Berger with a daring passing move at the fearsome Peraltada corner.[5] Although the car occasionally struggled in qualifying, it appeared to have the edge on the McLarens in race trim, particularly at high-speed circuits.[6] At the British Grand Prix, Mansell dominated qualifying while Prost struggled. Feeling that Mansell's car was superior to his own, he convinced the team to switch the chassis before the race, which he won while Mansell retired with gearbox failure while leading and setting fastest lap of the race promptly announced his quitting the sport.[7] However, the famous collision between Prost and Senna at the Japanese Grand Prix sealed the Drivers' Championship for Senna and the Constructors' Championship for McLaren. Prost finished runner-up in the championship and Mansell finished 5th and scored 1 win, including excellent performance in his last race for Ferrari at Adelaide, where he finished 2nd and almost won that race from Nelson Piquet and his Benetton-Ford. It would be another seven years before Ferrari would challenge for either championship again.
Aftermath
[edit]
Tiff Needell drove the 641 on Top Gear in 1995 in a segment where his co-host Jeremy Clarkson tested a Ferrari F50 and did a drag race against Needell in the 641 and some comparisons as well because the F50 road car is based on the 641.
The 641 was featured in F1 2019 as a DLC for the "Legends Edition" and for free in F1 2020, Test Drive: Ferrari Racing Legends, Forza Motorsport 6, Forza Motorsport 7, and Forza Motorsport.
Complete Formula One results
[edit](key) (results in bold indicate pole position; results in italics indicate fastest lap)
| Year | Team | Engine | Tyres | Drivers | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | Pts. | WCC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1990 | Scuderia Ferrari | Ferrari Tipo 036 Ferrari Tipo 037 V12 |
G | USA | BRA | SMR | MON | CAN | MEX | FRA | GBR | GER | HUN | BEL | ITA | POR | ESP | JPN | AUS | 110 | 2nd | |
| Ret | 1 | 4 | Ret | 5 | 1 | 1 | 1 | 4 | Ret | 2 | 2 | 3 | 1 | Ret | 3 | |||||||
| Ret | 4 | Ret | Ret | 3 | 2 | 18† | Ret | Ret | 17† | Ret | 4 | 1 | 2 | Ret | 2 |
† Driver did not finish the race, but was still classified as they completed at least 90% of the race distance.
Chassis log
[edit]The current[when?] locations of the 641 chassis are:
- 115 - Museum of Modern Art (USA)
- 116 - destroyed in testing
- 117 - Museo Ferrari (Italy)
- 118 - Private collection (Germany)
- 119 - Private collection (Switzerland)
- 120 - Private collection (Germany)
- 121 - Private collection (UK)
References
[edit]- ^ "1990 Ferrari 641 F1 - Images, Specifications and Information". Ultimatecarpage.com. 28 January 2010. Retrieved 23 August 2010.
- ^ "Ferrari F1-90". Formula1.ferrari.com. Retrieved 25 September 2013.
- ^ "Prost's infamous 1990 F1 Ferrari to go under the hammer". New Atlas. 22 April 2009. Retrieved 6 February 2020.
- ^ "Traction control and ABS". Motorsportmagazine.com. 7 July 2014. Retrieved 14 November 2021.
- ^ Master, Matt. "Mansell makes Ferrari history in Mexico". magazine.ferrari.com. Retrieved 6 February 2020.
- ^ "1990 Ferrari 641 F1 - Images, Specifications and Information". Ultimatecarpage.com. Retrieved 6 February 2020.
- ^ "1990 British Grand Prix race report - Decline and Fall". Motor Sport Magazine. 7 July 2014. Retrieved 6 February 2020.
Other sources
[edit]- AUTOCOURSE 1990-91 by Alan Henry
- AUTOCOURSE 1991-92 by Alan Henry
Ferrari 641
View on GrokipediaDesign and Development
Background and Objectives
The Ferrari 640, used by the Scuderia in the 1989 Formula One World Championship, demonstrated impressive straight-line speed and handling when operational, securing three race victories and nine podium finishes across the season, which propelled the team to third place in the Constructors' Championship with 59 points.[7] However, the car's reliability proved a significant drawback, particularly with frequent gearbox failures and other mechanical issues that limited finishes and hampered overall competitiveness against McLaren's dominant MP4/5.[8] These shortcomings underscored the need for refinement as Ferrari prepared for the following year, especially with the arrival of Alain Prost, who had narrowly lost the 1989 Drivers' Championship to teammate Ayrton Senna at McLaren. For the 1990 season, Ferrari's primary objectives centered on enhancing the 640's design to mount a credible title challenge against McLaren's continued supremacy, focusing on aerodynamic refinements for better downforce efficiency, increased engine output, and markedly improved reliability to minimize retirements.[6] The team aimed to leverage the ongoing FIA regulations mandating 3.5-liter naturally aspirated engines, which had been introduced the prior year, by optimizing power delivery and chassis balance without major rule shifts.[9] This strategic push was bolstered by Prost's signing in late 1989, pairing him with Nigel Mansell to form a potent lineup intent on ending McLaren's reign.[10] Following Enzo Ferrari's death on August 14, 1988, the Scuderia underwent a managerial transition that fostered a more aggressive and professional development philosophy, emphasizing innovation and rapid iteration under figures like team principal Cesare Fiorio and returning executive Luca di Montezemolo.[11] Central to this evolution was British designer John Barnard, who had joined as technical director in 1987 and championed advanced engineering practices, including the establishment of a dedicated UK-based design office to accelerate prototyping and testing.[12] This post-Enzo era marked a departure from traditional insularity toward a globalized, efficiency-driven approach, aligning with the imperative to reclaim championship glory. The 641 project was conceived in late 1989 as a direct evolution of the 640, with initial design work prioritizing a lighter chassis construction to achieve a superior power-to-weight ratio while retaining the semi-automatic gearbox's core principles. The V12 engine evolved from the Tipo 035/5 variant used in the 640, incorporating minor updates for enhanced durability and performance under race conditions.[13] Development emphasized iterative wind tunnel testing and component integration to address the predecessor's vulnerabilities, setting the stage for the car's unveiling ahead of the 1990 preseason.[14]Technical Specifications
The Ferrari 641 featured a lightweight monocoque chassis constructed from carbon-fiber and Kevlar honeycomb composite, providing structural rigidity while minimizing weight to meet FIA regulations.[2] This design, developed under the guidance of engineers John Barnard and Steve Nichols, contributed to an overall vehicle weight of approximately 503 kg with liquids, complying with the 1990 minimum weight requirement of 505 kg (excluding driver).[15][10] The chassis integrated the powertrain as a stressed member, enhancing torsional stiffness and facilitating the low-line bodywork that characterized the car's aerodynamic profile. At the heart of the 641 was the Tipo 036 3.5-liter (3,498 cc) 65° V12 engine, a naturally aspirated unit with a light alloy block and heads, water cooling, and dual overhead camshafts operating five valves per cylinder.[15] This configuration delivered 680 horsepower at 12,750 rpm, with electronic fuel injection managed by Weber-Marelli systems for precise delivery of 102 RON fuel.[2] Mid-season, the engine evolved to the Tipo 037 variant, incorporating refinements to the intake and exhaust systems that yielded marginal power gains up to approximately 685 horsepower at 13,000 rpm, improving throttle response without altering the core architecture.[16] The V12's high-revving nature emphasized peak power over low-end torque, aligning with the era's emphasis on naturally aspirated performance following the 1989 turbo ban. Aerodynamically, the 641 adopted a low-nose, low-line design optimized for ground-effect downforce, with a venturi underbody channeling airflow beneath the car to generate grip at high speeds.[4] Wing elements, including front and rear adjustable aerofoils, were tuned for circuit-specific demands, prioritizing high-downforce setups on twisty tracks while balancing drag on straights; the composite bodywork allowed for rapid modifications during development.[2] The suspension system employed a double-wishbone configuration at both ends, with pushrod actuation linking to inboard torsion bars and telescopic shock absorbers up front, and coil springs over dampers at the rear, complemented by anti-roll bars for stability.[15] Braking was handled by ventilated carbon-fiber discs with Brembo one-piece calipers on all four wheels, providing exceptional heat dissipation and modulation under the high loads of Formula One racing.[2] Power was transmitted via a Ferrari Type 641 longitudinal semi-automatic seven-speed gearbox with electronic management and a three-plate carbon clutch, enabling paddle-shift operation for seamless gear changes without a traditional clutch pedal.[15] The fuel system adhered to 1990 FIA rules prohibiting refueling during races, featuring a 220-liter capacity distributed across one central and two side tanks to maintain balance as consumption varied.[2] This setup, combined with the engine's efficient injection, allowed for strategic fuel management over the full grand prix distance, typically around 300 km, without compromising performance.[10]Development Milestones
The development of the Ferrari 641 began with the construction of its first chassis, designated 641/1, in December 1989 at the team's Maranello factory. This prototype served as the starting point for iterative design refinements, drawing directly from the 640's architecture while adapting to the new season's demands. Wind tunnel testing followed, where the primary objective was drag reduction through aerodynamic optimizations, including refined sidepod shapes and wing configurations to balance downforce and straight-line speed.[1] Key innovations underwent rigorous testing during prototyping, including the integration of Magneti Marelli's electronic engine management system for precise fuel injection and ignition control on the Tipo 036 V12. Refinements to the semi-automatic gearbox, originally introduced on the 640, focused on smoother paddle-shift operations and reliability under high loads. Initial trials with active suspension elements were also explored to improve handling over varied track surfaces, though these were limited by emerging regulatory scrutiny.[2][14] Pre-season shakedown runs took place in January 1990 at Ferrari's Fiorano circuit, with test driver Nicola Larini at the wheel. These sessions targeted vibration dampening in the chassis and fine-tuned gear shift timing to minimize driver input errors and enhance lap consistency. Larini's feedback proved instrumental in stabilizing the car's dynamic behavior during early laps.[17] Regulatory adaptations were a core focus amid the FIA's finalized 1990 rules, which confirmed the ongoing ban on turbochargers and imposed stricter limits on electronic driver aids like traction control. Engineers recalibrated the baseline setup accordingly, incorporating setup parameters suited to Alain Prost's precise style and Nigel Mansell's aggressive approach, ensuring the 641's 3.5-liter V12—delivering approximately 680 bhp—integrated seamlessly with the chassis for competitive straight-line and cornering performance.[1]1990 Formula One Season
Pre-Season Testing and Driver Lineup
For the 1990 Formula One season, Scuderia Ferrari secured Alain Prost as its lead driver through a high-profile contract signed in September 1989, marking his departure from McLaren after securing the drivers' championship.[18] Prost, a four-time world champion by the end of his career, brought proven expertise in car development and race strategy to the team. Nigel Mansell was retained as the second driver to provide continuity from the previous year, though his agreement to the lineup required renouncing his prior status as the team's undisputed number one, which introduced underlying tensions within the driver pairing from the outset.[19] Pre-season testing for the Ferrari 641 commenced in February 1990, with sessions at the Estoril circuit in Portugal focusing on initial shakedown runs and setup optimization. On February 6 and 10, both Prost and Mansell logged laps to evaluate the car's aerodynamics and power delivery across varying track conditions, including the circuit's high-speed corners and elevation changes. Additional testing occurred at the Paul Ricard circuit in France, where the team refined suspension geometry and engine mapping to address balance issues identified early in development. Prost provided key feedback during these runs, praising the 641's handling as a marked improvement over the preceding 640, particularly in cornering stability and responsiveness, which he described as making it "the best car on the grid."[20] These sessions collectively covered extensive mileage to simulate race durations, ensuring reliability ahead of the season opener. The engineering team, led by Steve Nichols following John Barnard's departure in late 1989, integrated the drivers' input with ongoing refinements to the chassis derived from the 640 platform. Nichols, who had joined Ferrari from McLaren in 1989, oversaw the transition, emphasizing seamless adaptation of the 641's semi-automatic gearbox and V12 engine to the drivers' styles. Preparations extended to logistical coordination for the Brazilian Grand Prix at Interlagos, including mock race simulations to align pit strategies and tire management. Under general manager Piero Fusaro, the organization streamlined operations to support the high expectations surrounding Prost's arrival and the car's potential. The 641's livery retained Ferrari's traditional rosso corsa red, prominently featuring Marlboro as the title sponsor alongside Agip and Fiat logos, a design that emphasized clean lines and visibility for television broadcasts.[21] Transporter logistics involved dedicated rigs for the two chassis allocated to the drivers, equipped with onboard diagnostics for rapid issue resolution during travel to South America. Final compliance checks with FIA scrutineers confirmed adherence to 1990 regulations on dimensions, weight distribution, and active suspension components, clearing the car for homologation without modifications.[2]Key Races and Incidents
The 1990 Formula One season began at the Brazilian Grand Prix, where Alain Prost delivered a masterful performance in the Ferrari 641, starting from sixth on the grid and methodically overtaking rivals to claim victory by 13.6 seconds over Gerhard Berger's McLaren.[22] Ayrton Senna, who had taken pole position, spun on lap 24 while lapping slower traffic but recovered to finish third, while teammate Nigel Mansell crossed the line fourth after a solid drive from fifth on the grid.[23] This opener highlighted the 641's strong race pace despite early-season setup challenges, setting the tone for Ferrari's competitive campaign. Prost went on to secure four more victories with the 641, showcasing its balanced handling and potent V12 power. At the Mexican Grand Prix, he started 13th after a qualifying error but charged through the field to win by over a minute, capitalizing on Senna's retirement due to a rear tyre failure. He dominated the French Grand Prix at Paul Ricard from pole, leading every lap for his third win of the year, and repeated the feat at Silverstone in Britain, fending off Thierry Boutsen by 25.8 seconds in mixed wet-dry conditions, with Senna third. Prost's fifth triumph came at the Spanish Grand Prix in Jerez, leading teammate Mansell to a 1-2 finish by 22 seconds, with Senna retiring earlier due to a radiator failure. Mansell added Ferrari's sixth and final win of the season at Portugal's Estoril circuit, taking pole and leading until a heavy crash involving Aguri Suzuki and Alex Caffi triggered a red flag on lap 61; the race was not restarted, with results declared from that point after Prost retired earlier with a gearbox issue. The season's most infamous incident unfolded at the Japanese Grand Prix in Suzuka, where Prost and Senna collided at the first corner on the opening lap while battling for the Drivers' Championship lead. Senna, inside on the apex, turned in sharply on Prost, sending both Ferraris and McLarens into the barriers and eliminating them from the race; Senna was then push-started in violation of rules but went on to win after penalties were controversially overlooked, clinching the title by seven points over Prost. Mid-season regulatory scrutiny on advanced suspension systems, though not directly banning the 641's passive setup, prompted FIA clarifications on adjustable components that subtly impacted Ferrari's handling optimization from the Hungarian Grand Prix onward, where Prost finished third but noted reduced responsiveness on the twisty Hungaroring. Reliability emerged as a persistent challenge for the 641, undermining potential results in key races. At the Monaco Grand Prix, Prost was leading comfortably when a battery failure forced his retirement on lap 30, while Mansell retired earlier on lap 13 with a gearbox failure, handing victory to Senna.[24] Similar woes struck at the German Grand Prix in Hockenheim, where Mansell retired from fourth place due to an engine failure on lap 32, though Prost finished fourth behind winner Ayrton Senna; these issues, including sporadic V12 overheating and transmission glitches, limited Ferrari to six wins across 16 races despite Prost's consistency, which earned him 71 points and second in the Drivers' standings behind Senna's 78.[25]Performance Analysis
Race Results and Statistics
The Ferrari 641 propelled Scuderia Ferrari to second place in the 1990 Constructors' Championship with 110 points, trailing McLaren-Honda's total of 121 points. In the Drivers' Championship, Alain Prost secured second position with 71 points, marking a strong debut season for the four-time champion at Ferrari, while teammate Nigel Mansell finished fifth with 37 points. These outcomes reflected the car's competitiveness against the dominant McLaren MP4/5B, though reliability issues and key incidents prevented a title challenge from succeeding.[26][25] The 641 achieved 6 Grand Prix victories across the 16-race season, equating to a 37.5% win rate, alongside 14 podium finishes, 3 pole positions, and 8 fastest laps. Prost claimed five of the wins—Brazil, Mexico, France, Britain, and Spain—while Mansell secured the sixth in Portugal, highlighting the driver's breakthrough performance in his home race for the team. These results underscored the 641's V12 engine power, which delivered strong outright pace, though the car often struggled with traction out of slow corners compared to rivals.[27][28]| Key Statistic | Ferrari 641 (1990) |
|---|---|
| Wins | 6 (37.5% of races) |
| Podiums | 14 |
| Pole Positions | 3 (Mansell: Britain, France, Portugal) |
| Fastest Laps | 8 |
| Total Points | 110 (Constructors) |