Hubbry Logo
logo
Ford Model Y avatar
Ford Model Y
Community hub

Ford Model Y

logo
0 subscribers
Read side by side
Ford Model Y
View on Wikipedia
from Wikipedia
Ford Model Y
Overview
ManufacturerFord of Britain
Ford SAF
Ford Germany
Ford España
Production1932–1937
Body and chassis
Body style2-door saloon 4-door saloon
2-door estate
2-door van
2-door pickup
Powertrain
Engine0.9 L Ford Sidevalve engine
Dimensions
Wheelbase90 in (2,286 mm)
Length141 in (3,581 mm)
Width55 in (1,397 mm)
Height64 in (1,626 mm)[1]
Curb weight1,540 lb (700 kg)
Chronology
SuccessorFord 7Y
Ford Model C Ten

The Ford Model Y is an automobile that was produced by Ford Britain, Ford SAF and Ford Germany from 1932 to 1937. It was the first Ford automobile specifically designed for markets outside the United States, replacing the Model A in Europe.

Production locations

[edit]

It was in production in England, where it is sometimes remembered as the "Ford Eight",[2] reflecting its fiscal horsepower rating, from 1932 until September 1937,[1]

The car was also produced in France (where it was known as the Ford 6 CV, despite actually falling within the 5CV French car tax band)[3] from 1932 to 1934, and in Germany as the Ford Köln from 1933 to 1936.

Smaller numbers were assembled in Australia (where a coupé version was also produced), Ireland (branded as the Baby Ford), Japan, Latvia (branded as the Ford Junior) and in Spain nicknamed as the Ford Forito. Plans to build it in the U.S. were scrubbed when a cost accounting showed that it would only be slightly cheaper to build than the Ford Model B.

The car

[edit]

The car was powered by a 933 cc (56.9 cu in) 8 (RAC)hp Ford sidevalve engine. The little Ford was available in two- and four-door versions, sold as the 'Tudor' (a pun on 'two-door') and the 'Fordor' (Ford/four-door) respectively. Originally each body was also available in standard or better-equipped 'DeLuxe' trim levels, but with the introduction of the 10hp Model C in late 1934, also available in DeLuxe form, these better-equipped versions of the Model Y were dropped from sale. The Model Y was now built to a single specification that was essentially the same as the previous standard guise but with a small number of features carried over from the old DeLuxe and the model was named the Popular for marketing purposes. This standardisation allowed production of the Model Y to be increased while the production cost per car was decreased. Over the next 12 months improvements in the production process at Dagenham, further alterations to the specification and some minor components and the increasing sales of the Model C (which brought economies of scale for the parts shared with the Model Y/Popular) allowed the sale price of the car to be dropped further. In June 1935 Ford was able to announce that the Popular Tudor model would be sold for just £100, a price it would hold until July 1937.[1] This was the first time a four-seater closed-bodied saloon car had sold in Britain for that price (the first British car to sell for £100, the 1931 Morris Minor SV, was a two-seater with a collapsible fabric roof and a wood-framed body).

The suspension was traditional Ford transverse leaf springs front and rear and the engine drove the rear wheels through a three-speed gearbox which, right from the start, featured synchromesh between the top two ratios.[1] The maximum speed was just under 60 mph (95 km/h) and fuel consumption was 32 miles per imperial gallon (8.8 L/100 km; 27 mpg‑US).

Even by the standards of the time, the UK-built Ford 8, like its major competitor the Austin 7, was found noteworthy for its "almost unbelievable lack of brakes."[4]

The Model Y also inspired copying by Morris Motors, with the Eight, and by Singer Motors, with the Bantam.[5]

Evolution

[edit]

For the first 14 months the original model with a short radiator grille was produced, this is known as the "short rad". After this in October 1933 the "long rad" model, with its longer radiator grille and front bumper with the characteristic dip was produced. By gradually improving production efficiency and by simplifying the body design the cost of a "Popular" Model Y was reduced to £100, making it the cheapest true 4-seater saloon ever, although most customers were persuaded to pay extra for a less austere version.[4] Both 4-door (Fordor) and 2-door (Tudor) saloons were produced and these could be had either with a fixed roof, or the slightly more expensive sliding "sun" roof.

Additional body version

[edit]
A light van version was also offered

Also offered was an attractive 5 cwt van, which proved very popular with small businesses.

Ford did not produce an open-top car because it was thought that the chassis was too flexible, but several specialist coach builders produced a range of Model Y tourers.

Commercial

[edit]

Market reaction in Britain

[edit]

Although of American design, the Model Y took the British market by storm, and when it was first introduced it made a major dent in the sales figures of Austin, Morris, Singer, and Hillman. It went on to take more than 50 per cent of the 8(RAC)HP sales.

Volumes

[edit]

Some 175,000 Model Ys [citation needed] were produced worldwide (including 153,117 in Great Britain and 11,121 in Germany) and the 'Y' and 'C' Register contains approximately 1,250 survivors.

Ford Model C

[edit]

In Britain the larger and faster 10(RAC)hp Model C never sold in such great numbers as the Model Y although there was a very attractive factory-produced tourer. In 1935 the styling was enhanced with some small modifications and the model was designated the CX.

In Germany the position was reversed. The locally produced Ford Model C was branded as the Ford Eifel, and remained in production for four years after the manufacturer had given up on the locally produced Type Y, the Ford Köln. The Köln was outcompeted by the Opel 1.0/1.2 litre, and only 11,121 Kölns were produced, while a more respectable 62,495 Eifels were manufactured between 1935 and 1940. There was never an 8hp Vauxhall equivalent to the Opel offering.

See also

[edit]

References

[edit]

Further reading

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Ford Model Y

View on Grokipedia
from Grokipedia
The Ford Model Y is a compact four-seater automobile produced by Ford Motor Company from 1932 to 1937, marking the first model designed specifically for markets outside the United States and serving as a successor to the Model A in Europe.[1][2] Developed during the Great Depression to bolster Ford's presence in Europe, the Model Y (known as the Ford Eight in the UK) featured a scaled-down design inspired by upcoming American models, with styling by Ford designer E.T. "Bob" Gregorie that influenced the 1933 Ford V8.[2][1][3] It was powered by a 933 cc side-valve inline-four engine rated at 8 RAC hp (23 bhp), paired with a three-speed manual transmission featuring synchromesh on second and third gears, and offered in right-hand drive configuration for British roads.[4][1][5] Body styles included the two-door Tudor saloon, four-door Fordor saloon, and various commercial variants like vans, with a 78-inch wheelbase, 141-inch overall length, and curb weight around 1,500 pounds.[1][2] Production totaled approximately 175,000 units across Ford's facilities in Britain (over 153,000 at the Dagenham plant), Germany (about 11,000), and France (around 10,000), helping establish Ford as a major European manufacturer during economic hardship.[6][7][1] Priced from £100 in 1935 (equivalent to about $500), the Model Y was affordable and versatile, appealing to both private buyers and commercial users, and remains notable today with an estimated 1,250 survivors preserved by enthusiast groups.[1][8]

Overview

Introduction

The Ford Model Y is a compact saloon automobile introduced in 1932 by Ford of Britain as the company's first model specifically designed for European markets, marking a shift from adapting U.S. designs to creating vehicles tailored to regional needs. Produced until 1937, it featured a 933 cc sidevalve inline-four engine delivering 8 RAC horsepower, offering an affordable and efficient option for the era's motoring public.[9] This model replaced the U.S.-designed Model A in Europe, where it was marketed in the UK as the "Ford Eight" to emphasize its engine size and accessibility. Worldwide production reached approximately 175,000 units, with assembly occurring at Ford's Dagenham plant in England and other European facilities, solidifying its role as a bestseller in the compact car segment.[9][10] Launched with a base price of £120 for the Tudor two-door saloon, the Model Y saw its cost reduced to £100 by 1935, broadening its appeal amid economic recovery and competition from rivals like Austin. Variants such as the long-radiator models were introduced shortly after launch to accommodate different export markets.[11][9]

Historical Significance

The Ford Model Y represented a pivotal shift in Ford's global strategy, as the first model specifically designed for markets outside the United States, diverging from the larger American-centric vehicles like the Model A. Engineered and produced at the Dagenham plant in the UK starting in 1932, it incorporated adaptations such as a shorter wheelbase and a compact 933 cc sidevalve engine rated at 8 RAC hp to align with British fiscal horsepower taxation and accommodate narrower European road conditions. These modifications addressed the limitations of prior models ill-suited to local infrastructure and regulations, enabling Ford to penetrate continental markets more effectively.[9][4] Launched amid the Great Depression, the Model Y prioritized mass affordability in Europe, where economic hardship demanded cheaper alternatives to the oversized and costlier Model A. Priced as low as £100 by 1935—the cheapest true four-seater saloon at the time—it quickly dominated the UK 8 hp segment with over 50% market share, sustaining Ford's viability in a region reeling from financial collapse. This economic tailoring not only boosted sales but also underscored Ford's recognition of regional needs, fostering broader adoption of affordable motoring during a period of widespread austerity.[9][2] The model's global expansion further solidified Ford's non-US footprint, with production under license or local assembly in multiple countries including France (via Ford SAF as the 6 CV), Germany (as the Köln), Australia, Ireland, Japan, Latvia, and Spain. This widespread manufacturing influenced the development of Ford's international subsidiaries, promoting localized engineering practices and contributing to the company's long-term European presence, with total output exceeding 175,000 units worldwide. The engine's sizing for fiscal horsepower ratings exemplified this adaptive approach, ensuring compliance across diverse tax regimes.[9][7][4]

Development

Design Origins

The Ford Model Y was conceived in 1931 as a response to the need for a compact, affordable vehicle tailored to the European market, particularly to compete with the Austin Seven in Britain. Sir Percival Perry, Ford of Britain's managing director, played a pivotal role in initiating the project, advocating for a smaller car that could be produced economically at the newly opened Dagenham plant while adhering to local preferences for size and cost. The design drew heavily from the American Model A platform but was scaled down significantly to suit narrower roads and lower fuel taxes in the UK, emphasizing simplicity and low production costs as core principles.[12][13] Development was led primarily by Ford engineers in Dearborn, Michigan, with collaborative input from the UK team to adapt the vehicle for British conditions. E.T. "Bob" Gregorie handled the styling, creating a sleek, flowing body that incorporated elements like Model A door handles and tail lamps, while the overall chassis was shortened to a 78-inch wheelbase for better maneuverability.[1] Fourteen non-running prototypes were designed and built in Dearborn over four months starting in October 1931 and shipped to England for promotional purposes; these were unveiled at the Royal Albert Hall in London in February 1932. Meanwhile, twelve running prototypes underwent rigorous testing at the Dearborn airfield and were later trialed in UK conditions by mid-1932, validating the design's suitability before full-scale manufacturing at Dagenham.[2][6] The initial design featured a 3-speed manual gearbox with synchromesh on the top two ratios for smoother shifting, a departure from fully non-synchronous transmissions in earlier models. Suspension employed traditional transverse leaf springs at both ends, providing a simple and cost-effective setup that aligned with Ford's engineering ethos. The powertrain adhered closely to Ford's flathead (sidevalve) engine philosophy, prioritizing reliability, ease of manufacture, and minimal complexity over higher performance, with the engine displacing 933 cc to meet British fiscal requirements.[9][14]

Engineering Innovations

The Ford Model Y featured a 3-speed manual gearbox with synchromesh on the second and third gears, which was an innovative feature for small cars in the early 1930s, facilitating smoother gear changes compared to contemporary non-synchronized transmissions in the same class.[11][15] The transmission was rear-wheel drive with a central floor-mounted gear shift lever, enhancing driver accessibility and control in the compact cabin designed for European roads.[4] The braking system employed mechanical brakes on all four wheels, operated via cables, providing basic stopping power suitable for the era's low-speed urban driving but often criticized for its relative weakness and tendency to fade under heavy use.[16][17] This cable-operated design, while simple and cost-effective, required frequent adjustments to maintain effectiveness, reflecting the engineering compromises made to keep production affordable for the mass market. Body construction utilized pressed steel panels mounted on a separate chassis frame, which contributed to the vehicle's lightweight structure and improved fuel efficiency over heavier framed predecessors, making it well-suited for European taxation based on engine size and weight.[9] However, the lack of robust anti-corrosion measures rendered the body prone to rust, particularly in damp climates.[18] Ford did not offer factory convertibles, as the chassis exhibited excessive flex under torsional loads without a full roof, necessitating custom coachbuilt bodies for open-top variants by third-party specialists.[9]

Production

Manufacturing Locations

The Ford Model Y was primarily assembled at the Ford of Britain facility in Dagenham, Essex, with main production commencing on August 10, 1932. Components for the model were also manufactured at the Trafford Park plant in Manchester, which served as an early production hub before the full transition to Dagenham. This British network formed the core of Model Y output, contributing the majority of the approximately 175,000 units produced globally.[6][14][7] In Europe, assembly occurred at the Ford SAF plant in Bordeaux, France, from 1932 to 1934, where the model was adapted for local markets under the same name. In Germany, production took place at the Ford-Werke facility in Cologne from 1933 to 1936, with 11,121 units built as the Ford Köln, featuring modifications such as adjusted lighting to comply with national regulations. Licensed production was also undertaken in Spain at a Ford factory in Barcelona until July 1936, incorporating local sourcing for items like upholstery and glass while relying on imported core parts.[9][19][9][7][6] Beyond Europe, limited assembly of the Model Y happened in several international locations using shipped kits from the United States or United Kingdom. In Australia, vehicles were put together at the Geelong plant, supporting regional distribution. Ireland's Ford plant in Cork resumed assembly operations with the Model Y, utilizing parts imported from Dagenham. In Japan, the Yokohama assembly facility handled production for the domestic market from the mid-1930s. Similarly, in Latvia, vehicles were assembled in Riga and marketed as the Ford Junior, though exact volumes remain limited and scarce. These sites often involved partial knock-down kits, with local adaptations for regulatory compliance, such as lighting and trim variations.[20][21][22][4]

Output and Timeline

Production of the Ford Model Y commenced on August 10, 1932, at Ford's Dagenham plant in the United Kingdom, initially offering only the two-door Tudor saloon body style.[6] The four-door Fordor saloon was added to the lineup in October 1932, expanding options for buyers seeking a more spacious configuration.[6] A key milestone came in October 1933, when the model underwent a styling update to feature a longer radiator grille and a dipped front bumper, marking the transition from the original "short rad" design to the "long rad" version that characterized later production.[9] In 1935, Ford standardized the Popular variant—a simplified two-door saloon—with a significant price reduction to £100, positioning it as the most affordable four-seater closed car available in Britain at the time.[9] The Model Y was manufactured in the UK until September 1937, after which production shifted to its successor, the 7Y model.[9] Overseas assembly occurred in France from 1932 to 1934 under the designation Ford 6 CV, and in Germany from 1933 to 1936 as the Ford Köln.[9] Total worldwide output reached approximately 175,000 units, including 153,117 built in the UK, 11,121 in Germany, and around 10,000 in France.[10] Early production efforts were hampered by supply chain disruptions and broader economic constraints stemming from the Great Depression, which curtailed raw material availability and workforce stability across European automotive manufacturing in the early 1930s.[23] Annual output peaked at roughly 40,000 units during the 1934–1935 period, reflecting improved efficiency amid recovering market conditions.[9]

Specifications

Engine and Performance

The Ford Model Y featured a 933 cc inline-four sidevalve (flathead) engine with a cast-iron block, rated at 8 RAC horsepower for UK fiscal taxation purposes, though actual output was approximately 23 bhp at 4,000 rpm.[11][9] The engine employed a single Ford carburetor for fuel delivery and utilized distributor ignition.[5] From 1934, an enlarged 1,172 cc version producing 10 RAC hp was available.[14] Performance metrics reflected the modest powertrain, with a top speed of around 60 mph (97 km/h).[9] Acceleration from 0 to 50 mph took approximately 24 seconds, while fuel economy was rated at 32 mpg (UK imperial) or 27 mpg (US), depending on driving conditions.[11] Torque output was about 37 lb-ft, available at low engine speeds for adequate low-end pull.[24] The drivetrain consisted of rear-wheel drive paired with a three-speed manual transmission, lacking an overdrive option, which contributed to the vehicle's straightforward and reliable operation suited to era standards.[5]

Chassis and Body Dimensions

The chassis of the Ford Model Y employed a conventional ladder frame design, which supported the body's mounting and contributed to the vehicle's overall durability and simplicity in construction. This frame incorporated rigid axles at both the front and rear, with a uniform track width of 45 inches (1,143 mm) for each axle, providing stable handling for a compact economy car.[25][5] The suspension system relied on transverse semi-elliptic leaf springs mounted front and rear, a traditional setup that offered basic ride comfort and load-carrying capability without complex components. Steering was managed via a worm-and-sector mechanism, which delivered direct control typical of 1930s small cars. Ground clearance measured approximately 5 inches (127 mm), adequate for urban and rural roads of the period.[11] Key body dimensions included a wheelbase of 90 inches (2,286 mm), overall length of 141 inches (3,581 mm), width of 55 inches (1,397 mm), and height of 64 inches (1,626 mm), making the Model Y notably compact compared to larger contemporaries. The curb weight was around 1,540 lb (698 kg), reflecting its lightweight steel construction and efficient packaging for affordability.[26][5]

Variants

Standard Models

The standard models of the Ford Model Y consisted of passenger saloon configurations designed for everyday use, sharing a common 933 cc side-valve inline-four engine across variants.[9] The Tudor, a two-door saloon introduced in August 1932, seated four passengers and featured a compact design suitable for urban driving. Initially equipped with a short radiator grille, the Tudor transitioned to a longer radiator in October 1933, which included a deeper grille and a bumper with a curved-down center section for improved aesthetics and airflow. This change marked an evolutionary update that applied to subsequent production without altering the core body structure.[6][9] The Fordor, a four-door saloon added in October 1932, offered greater accessibility and was oriented toward family use while maintaining the same seating capacity of four as the Tudor. Like the Tudor, it adopted the long radiator design starting in October 1933, aligning its front-end styling with the updated model lineup. The Fordor's additional doors provided practical advantages for rear passengers, making it a popular choice for households.[6][9] From 1935 onward, the Popular variant introduced simplified trim across both Tudor and Fordor bodies to enhance affordability, including a fixed headlamp cowl and reduced decorative elements while retaining essential functionality. This version accounted for the majority of late-production saloons, emphasizing value through streamlined manufacturing. Standard interior features included wool upholstery for durability and basic instrumentation comprising a speedometer and ammeter; an optional demister was available for improved visibility in adverse weather.[9]

Commercial and Special Bodies

The Ford Model Y was adapted into several commercial and special body variants to meet the needs of businesses and specialized users, primarily in Europe and select export markets. These included enclosed vans for urban deliveries and open-bed pickups for light utility work, all built on the standard Model Y chassis with minimal modifications to the 933 cc side-valve engine and mechanical components.[9] A prominent commercial variant was the 2-door panel van, introduced in 1932 as the Fordson Model Y 5 cwt delivery van, featuring a wood-framed enclosed body for secure cargo transport. With a payload capacity of 5 cwt (approximately 250 kg), it became popular among small businesses for its compact size and affordability, suitable for navigating narrow streets in cities like London. Production continued until 1937, with the van sharing the saloon's 23 bhp output for reliable short-haul performance.[9][15] For utility applications, coachbuilt open-bed pickups were available, typically with a 5-6 cwt load capacity and a simple drop-side rear for easy access. In the UK, such production was limited due to low demand, but it found greater adoption in Australia as a roadster utility model, where local assembly emphasized ruggedness for rural tasks; only around ten examples are known to survive today. These pickups retained the Model Y's three-speed gearbox and rear-wheel drive, making them practical for trades like farming and light hauling.[27] Special bodies included coachbuilt estates, often termed shooting brakes, with a wood-framed rear extension over the saloon chassis to accommodate 5-7 passengers and cargo. These were produced by third-party coachbuilders, featuring foldable rear seats and optional wood paneling for a distinctive country-estate aesthetic. No factory drophead coupe was offered, though aftermarket tourers were created by independent modifiers for open-top leisure use. The German-built version, known as the Ford Köln and assembled in Cologne from 1933, featured a 921 cc side-valve inline-four engine and local adaptations including revised badging and interior fittings.[28][29][9]

Market Performance

Sales and Market Share

The Ford Model Y quickly established itself as a commercial powerhouse in the United Kingdom, capturing over 50% of the 8 hp taxation class market share between 1933 and 1937. Total sales in Great Britain amounted to 153,117 units over its production run from 1932 to 1937, with annual peaks reaching approximately 30,000 units during the mid-1930s. This dominance was driven by its affordable entry price, which started at £120 upon launch in 1932 and dropped to £100 for the Popular variant by 1935, making it the cheapest fully equipped four-seater saloon available. The model's success was bolstered by an extensive dealer network that facilitated widespread accessibility.[9][7] Internationally, the Model Y saw more modest but notable penetration in select markets. In Germany, where it was produced as the Ford Köln from 1933 to 1936, approximately 11,121 units were sold, establishing a strong presence in the small car segment despite local competition. Sales in France totaled about 10,000 units through 1934, prior to Ford's transition to larger V8 models amid high tariffs that inflated prices. Elsewhere, adoption was limited, with fewer than 1,000 units assembled and sold in Australia, reflecting challenges in distant markets with nascent dealer infrastructure.[7][30] The Model Y's pricing strategy and positioning as an economical alternative to rivals like the Austin Seven were key to its market penetration, enabling Ford to outsell established British competitors in the entry-level segment during the economic recovery of the 1930s.[9]

Competition and Reception

The Ford Model Y received positive reception in the United Kingdom for its exceptional value as the cheapest true four-seater saloon available, priced at £100 by 1935, which appealed to budget-conscious buyers seeking affordable family transport.[9] It was praised for its reliability in everyday use, though the side-valve engine typically required a rebore after around 30,000 miles, with Ford offering reconditioned units for £30 in the post-war era.[14] Criticisms focused on its mechanical simplicity, including rod-operated brakes that were adequate for the era but lacked refinement.[14] In the competitive landscape of the 8 hp class, the Model Y outsold key rivals such as the Austin Seven, capturing over 50% of the UK market segment through its modern styling and low cost.[9] The Morris Eight, introduced in 1935, adopted a copycat design that closely mirrored the Model Y's bodywork and layout, inspired by its sales success and flowing lines, helping Morris regain market footing against Ford.[31] It also faced competition from models like the Singer Bantam and Hillman Minx, but its pricing and four-seat capacity gave it an edge in attracting working-class families.[14] Internationally, the Model Y proved successful in Germany, where it was produced as the Ford Köln from 1933 to 1936 and established a presence in the small car segment. In France, production as the Ford 6 CV from 1932 to 1934 was limited by high tariff barriers that inflated its price compared to the UK version, reducing appeal amid strong local preferences for domestic brands like Citroën and Renault.[6] Exports to British colonies were generally positive, benefiting from the model's simplicity and low running costs suited to emerging markets.[9] The Model Y particularly attracted first-time car buyers in the UK, democratizing motoring for those previously reliant on motorcycles or public transport, and its strong used market endured well after production ended in 1937, with enthusiasts valuing its historical role in Ford's European expansion.[14]

Related Models

Predecessors and Successors

The Ford Model Y succeeded the Model A (1927–1931) as Ford's primary small car offering in Europe. The Model A, originally designed for the American market, proved too large for narrow European roads and subject to high taxes due to its 3.3-liter engine under the British fiscal horsepower system.[1][9] To address these limitations, the Model Y incorporated a smaller overall size—measuring 141 inches in length with a 78-inch wheelbase—and was engineered locally at Ford's Dagenham plant in Britain, marking the first Ford model tailored specifically for non-U.S. markets.[1] The Model Y's direct successor was the Ford 7Y, introduced in 1937 as the Ford Eight. This model featured updated styling through a rebodied design that was slightly larger while retaining mechanical similarities, including the shared 933 cc sidevalve engine family.[32][9] Improvements included enhanced braking systems, with changes to the setup post-1937 for better performance over the Model Y's original mechanical brakes.[33] Production of the Model Y and 7Y overlapped in 1937, allowing a smooth transition as the latter gradually replaced the former.[34] The 7Y received a 1939 facelift resulting in the short-lived pre-war E04A Anglia and E93A Prefect, with production limited due to the outbreak of World War II. Post-war, these evolved into Ford's small car lines, serving as the basis for the E494A Anglia and E493A Prefect models introduced in 1948. In transitional production, the Model Y chassis continued to underpin early 7Y commercial vans, maintaining compatibility for light-duty applications.[9] By 1938, the 7Y represented the culmination of Ford's sidevalve engine development in this segment, as subsequent models shifted toward overhead-valve designs in the evolving lineup.[35]

Ford Model C Comparison

The Ford Model C served as a larger sibling to the Model Y, introduced in 1935 with a 1,172 cc sidevalve four-cylinder engine rated at 10 RAC hp and delivering approximately 30 bhp at 4,000 rpm.[36] This engine was an enlarged variant of the sidevalve family used in the Model Y, sharing core design principles for reliability and economy while providing greater power for mid-size applications.[36] The Model C featured a longer wheelbase of 90 inches compared to the Model Y's 78 inches, enabling more spacious body styles such as four-door saloons and tourers, and it utilized initial tooling adapted from Model Y production lines at Ford's Dagenham plant in the UK.[37][38] These shared chassis elements and manufacturing processes allowed for efficient scaling, though the Model C's stiffer frame supported its positioning as a step up in refinement.[36] In the UK market, the Model C targeted buyers seeking a more premium entry-level vehicle, priced at around £130—higher than the Model Y's more affordable tag—and emphasizing comfort for families over the Y's compact urban focus.[36] Production in the UK totaled approximately 16,000 units through 1937, reflecting limited success amid competition from established mid-size rivals like the Austin 10, as the model's higher cost deterred budget-conscious consumers who preferred the cheaper Model Y.[39] In contrast, the German-market version, known as the Ford Eifel and built in Cologne, achieved far greater volume with 61,495 units produced from 1935 to 1939, benefiting from Ford-Werke's alignment with Nazi-era industrial policies that promoted domestic automobile manufacturing and infrastructure projects like the Autobahn.[40] This disparity underscored the Model Y's dominance in the UK due to its entry-level affordability, outselling the C by a wide margin and sustaining Ford's volume leadership in the small-car segment until the Y's phase-out in 1937.[40]

References

  1. The 1934 Model Y - Ford | The Online Automotive Marketplace
  2. Car of the Week: 1932 Ford Model Y prototype
  3. Ford's first 'foreign' car – the Ford Model Y | Shortfinals
  4. Ford Model Y | Classic Cars Wiki | Fandom
  5. Ford: Model Y - Graces Guide
  6. About Us , A History - Ford Model Y & C Register
  7. Ford Model Y 8hp Tudor 1932-37 vintage car portrait print
  8. Ford Model Y (1932 -1937) - Classics Dude
  9. 1933 Ford Cabriolet | Classic Auto Mall
  10. Ford in Europe - An historical time line - Automotive News
  11. Model Identification - Ford Model Y & C Register
  12. The Other Y Type – The Ford Model Y
  13. Farewell to the little Model Y Van | Vintage & Classic Spares
  14. [PDF] The Impact of Motoring
  15. Best easy-to-live-with pre-war cars - Classics World
  16. A Rusty Car - the worlds rustiest Ford Model Y 8hp??
  17. Ford SAF: 1929–1940 (Chapter 1) - The Politics of Industrial ...
  18. Ford's history in Australia - carsales.com.au
  19. Research Guide: Ford plant in Cork, Ireland - AskUs
  20. Ford Model Y | Tractor & Construction Plant Wiki - Fandom
  21. American automobile industry in the 1930s | Research Starters
  22. 1933 Ford Model Y 8 hp - Carfolio.com
  23. https://gb.readly.com/magazines/classic-car-weekly/2023-06-28/649ab38c00a23640c090325f
  24. Car - The Definitive Visual History of the Automobile - PubHTML5
  25. Ford Model Y 8hp - Brightwells Classic Cars
  26. 1933 Ford Model Y Alpine Tourer - Bring Your Own Booster Seats
  27. Ford Model Y pickup truck. - Old Classic Car.
  28. The best-looking Fords ever sold - Autocar
  29. Henry's First Export: 1932 Ford Model Y Project | Bring a Trailer
  30. https://www.autohistory.org/wp-content/uploads/2022/10/AHR056.pdf
  31. The Morris 8 – A Family Car Inspired by The Ford Model Y
  32. Ford Eifel: a sharper 'C' - Classic & Sports Car
  33. Eight, Model 7Y - Small Ford Spares
  34. https://www.oldclassiccar.co.uk/forum/phpbb/phpBB2/viewtopic.php?t=21391
  35. Ford Model Y - Simon Cars
  36. 1937-1939 Ford 7Y Eight 8hp - Old Classic Car.
  37. Ford ModelC - Ford Model C the 10hp 'big little' car - Simon Cars
  38. 1936 Ford Model C Ten Saloon For Sale by Auction
  39. Ford Model Y or Vicky - Rods 'n' Sods
  40. Ford Model C Ten specs, lap times, performance data
  41. Lot 216 - 1936 Ford C Ten Saloon - Historics Auctioneers
  42. Automotive History: A Brief Guide To Early German Fords, Part 1
User Avatar
No comments yet.