Hubbry Logo
Ford Model AAFord Model AAMain
Open search
Ford Model AA
Community hub
Ford Model AA
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Ford Model AA
Ford Model AA
Ford Model AA
View on Wikipedia
from Wikipedia
Ford Model AA
Ford Model AA truck displayed in Kilgore, Texas East Texas Oil Museum
Overview
ManufacturerFord
Production1927–1932
DesignerHenry Ford and Edsel Ford
Body and chassis
ClassMedium commercial
Body style
RelatedFord Model A
GAZ-AA
GAZ-MM
GAZ-AAA
Powertrain
Engine201 CID (3.3 L) 4-cylinder inline
Transmission4-speed manual and reverse
Dimensions
Wheelbase131 in (3,327 mm)
157.5 in (4,000 mm)
LengthVaried by body style
Width67 in (1,702 mm)
HeightVaried by body style
Curb weightVaried by body style
Chronology
PredecessorFord Model TT
SuccessorFord Model BB
GAZ-AA

Ford Model AA is a truck from Ford. As the Model T and TT became obsolete and needed to be replaced, Henry Ford began initial designs on the Model A and Model AA in 1926. Basic chassis layout was done rapidly and mechanical development was moved forward quickly. Body design and style was developed and then outsourced to various body manufacturers, including Briggs and Murray. The designs of the Model A shared parts and materials with the Model AA Ford, notably the body, engine and interior. The AA usually received plainer interiors than their car counterparts. The Model AA followed similar design changes to the Model A during the AA's four years in production, often delayed anywhere from three to nine months.[citation needed] The mechanical changes and upgrades were done during production of the vehicles. Body changes that occurred between 1929 and 1930 were also integrated into AA production, but leftover parts were used longer in the heavy commercial trucks.

Mechanical details

[edit]
Ford AA [1] Sketch with lengths

The Model AA Ford is powered by the same 201-cubic-inch (3.3 L) I4 engine that the Model A Ford used. The engine produced a maximum of 40 horsepower at 2,200 rpm. The engine featured an up-draft carburetor, six-volt generator, 2 and 4-blade fan, mechanical water pump, mechanical oil pump, electric starter and four-row radiator. All of these features were identical to the Model A Ford except the radiator. The engine could also be crank started if necessary by a hand crank that is inserted through a hole in the radiator shell. The Model AA was based on a chassis that was similar in design to the Model A Ford, except it was substantially larger and heavier to accommodate the work this truck was designed for.

The Model AA Ford has a four-speed manual gearbox. The additional gear in the transmission is a "granny" or "creeper" first gear with a higher reduction ratio than the first gear on a Model A Ford to provide more torque to move a loaded truck. The second through fourth gears on the Model AA transmission were similar ratios to the first through third gears on the Model A transmission. The Model AA transmission also featured a lock-out on the shift knob for reverse that required a lever to be activated with the thumb so reverse could be engaged. This was done to prevent accidental engagement of reverse while the truck was in motion. Early trucks had a worm gear rear-end that limited the top speed of the truck. That rear-end was replaced by a ring and pinion differential to improve the speed of the truck. The later differential came with high speed and low speed options. Later models were fitted with braces on the outer casing of the rear-end to provide additional support to the rear-end housing.

The suspension of the AA Truck was similar to the Model A Ford in the front end. A leaf spring is centered in the front ‘A’ frame over the front axle. Shock absorbers were available for the front end. The rear suspension differed from the Model A Ford. The AA had leaf springs mounted to the chassis and shackled to the rear axle. The rear suspension did not have shocks.

The controls in the Model AA are entirely mechanical, except the windshield wipers in later models. The brakes are mechanical and the truck has four oversized drum brakes to stop the vehicle. The mechanical system is a pull lever system that applies the force from the pedal to a pivot that pulls the brake rods that expand the brakes in the drums. The brake light is activated when the brake pedal is pushed. The brakes are proportioned more toward the rear drums. The parking brake is a chrome lever on the floor with a release button on the top. The windshield wipers started as hand operated and later models were powered by vacuum diverted from the intake manifold. The horn button is mounted in the middle of the steering wheel assembly. Controls for the lights are also incorporated into the steering assembly. The switch was a three-stop switch for parking lights, headlights and high-beams. The tail-light lens colors on the AA underwent several changes during the production run. Two levers are mounted on the steering column to adjust the engine. The left lever controls the manual advance and retard of the timing. Adjusting the timing of the engine changes the time that a spark will occur in the combustion chamber and those changes affect the performance of the engine. The right lever is a manual control for the throttle. The throttle can be adjusted to ease the shifting of the transmission and the idling speed of the engine. Underneath the dash on the right side is the choke rod. The choke can adjust the flow of fuel from the carburetor into the engine. Turning the knob on the choke rod clockwise closes the fuel flow, leaning out the engine; turning the knob counterclockwise opens the fuel flow to the engine.

The gauge cluster includes three basic gauges. The cluster is in a diamond formation, with the start key and pop-out locking switch is on the left point. The top of the cluster holds the gas gauge, which directly connects into the gas tank, behind the dashboard. The right point holds the amp gauge, which shows the charge rate of the generator. The bottom of the dash holds the speedometer and odometer. Additional gauges can be mounted below the cluster if desired.

During the production of the Model AA, the wheels were also changed. Spoked wheels similar in appearance to Model A wheels but much heavier were used during 1928. Twenty inch 6 slot disc wheels were produced by Budd for Ford during 1929. In 1930, a new style 20 inch 5 slot disc wheel was adopted. These wheels were used for 1930 and part of 1931. The final wheels were a further modification of the 1930 wheel, with a raised center to reinforce the wheels and allow spacing of dual wheels in the rear so the tires would not rub against each other. The dual wheels were used for a variety of body styles, including dump trucks, tow trucks, tankers, fire trucks, and flatbed stake trucks. Wheel nuts changed with each new style of wheel to meet the changes made in the designs of the wheel. Special wheels were produced for ambulances, buses, and funeral coaches (hearses).

Variants

[edit]

The Model AA was available with a number of options. Two wheelbases were available, 131.5 inches (3,340 mm) and 157 inches (4,000 mm). Various body styles were available on different chassis.

The Model AA Ford was available in a variety of body styles from the Ford Corporation. Specialty bodies include: Funeral Coach, Ambulance, Express Pickup, Dump Truck, and a chassis-cab (no bed). The cab-only model was sold to customers who wanted a custom body to be built by an after-market company. Corporations could have custom paint and other modifications made by Ford for fleets of vehicles.

To eliminate the complexity and cost of its variety of postal trucks, and accommodate the needs of parcel post service. the U.S. Postal Service purchased a fleet of Model A vehicles from Ford that had custom-built postal truck bodies manufactured and assembled by outside builders, notably the Mifflinburg Body Company. These half-ton trucks remained in use, in some cases, until the 1950s.[2]

  • 1929 Ford Model AA Truck
    1929 Ford Model AA Truck
  • 1930 Model AA
    1930 Model AA
  • 1929 Ford Model AA Dump Truck
    1929 Ford Model AA Dump Truck
  • An AA-based bus, 1932
    An AA-based bus, 1932

Overseas production

[edit]
Final assembly of the first truck of the Nizhny Novgorod (Gorky) Automobile Plant - NAZ-AA, 1932

Ford licensed the manufacture of the Model A and AA to a variety of nations, notably the Soviet Union. More than 985,000 AAs were built by GAZ in the USSR from 1932 to 1950. The GAZ version had a cargo capacity of 1,500 kg (3,300 lb). A model with stronger 50 hp (37 kW) engine and wartime simplifications is often named GAZ-MM, after the engine.[3]

In October 1931 a Model AA was the first vehicle produced at Ford of Britain's own new Dagenham plant in England.

The Model AA was also built in several nations in mainland Europe under license from the Ford Corporation. At least three Danish armored vehicles (FP-1, FP-2, and FP-3) were based on the chassis.[4][5]

Present day

[edit]

Today, enthusiasm for the Model AA continues. Preservation and restoration of these vehicles remains popular. In the United States, there are two national clubs. One club supports the Model A/Model AA hobby and one club is dedicated specifically to the Model AA. The Model A Restorers Club and the Model A Ford Club of America, along with the Ford Model AA Truck Club work to support members with technical advice and support along with displaying members vehicles as they are being restored.

In some countries, like Uruguay and Cuba, Model AA trucks are still in use, more than 80 years after their introduction.

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Ford Model AA

View on Grokipedia
from Grokipedia
The Ford Model AA was a line of light- and medium-duty commercial trucks manufactured by the from 1927 to 1932, serving as the truck variant of the popular Model A passenger car. Built on a modified version of the Model A , it featured a stronger frame, longer options of 131.5 or 157 inches, and reinforced components to support payloads ranging from 1 to 1.5 tons. The truck was powered by a 200.5-cubic-inch (3.3-liter) L-head inline-four-cylinder engine producing 40 horsepower at 2,200 RPM and 128 lb-ft of , paired with either a three-speed sliding-gear transmission shared with the Model A or a heavy-duty four-speed unit including a low-ratio "granny" first gear. Introduced as a successor to the outdated Model TT truck, the Model AA capitalized on the Model A's engineering advancements, such as improved suspension with leaf springs and hydraulic shock absorbers, to provide better ride quality and reliability for commercial applications during the late economic boom. It was offered in a wide array of body styles, including roadster pickups, stake beds, panel vans, canopy deliveries, dump trucks, and specialized variants like ambulances and buses, making it versatile for urban delivery, farming, and municipal use. Equipped with mechanical drum brakes on all four wheels, spoked or disc wheels depending on the year, and a hand-crank starting system, the Model AA also introduced an early oval Ford badge on its vehicles. Over its production run, Ford built approximately 480,000 Model AA trucks as part of the broader 4.3 million Model A/AA vehicles, solidifying the company's leadership in the affordable truck segment before the impacted sales. The model was exported and assembled overseas, including at Ford's plant in starting in 1931, where the first AA truck rolled off the line on of that year. It was phased out in 1932 and replaced by the larger Model BB, available with V8 power, starting in 1932, marking the end of Ford's four-cylinder truck era until the postwar period. Today, surviving examples are prized by collectors for their historical role in early American trucking and their shared heritage with the iconic Model A.

History and Development

Origins and Introduction

The Ford Model AA truck began production in late December 1927 and was introduced to the public in 1928, alongside the Model A passenger car, as the direct successor to the Model TT, which had been produced from 1917 to 1927. This launch coincided with the cessation of Model T production after nearly two decades, allowing Ford to phase out its outdated lineup in response to evolving automotive standards and consumer preferences. The Model AA was developed to extend the Model A's platform into the segment, providing a modern replacement for the aging TT amid Ford's strategic pivot to regain market dominance. Henry Ford directed the design of the Model A and AA beginning in late 1926, motivated by the Model T's declining competitiveness and the need to offer more affordable, reliable, and versatile vehicles suited to the 1920s economy and infrastructure improvements. Competitors such as Chevrolet and Dodge had eroded Ford's lead with superior styling, performance, and features, prompting Ford to prioritize enhancements in efficiency and adaptability for commercial users. The resulting Model AA aimed to deliver a lighter, more fuel-efficient heavy-duty option compared to the TT, balancing cost-effectiveness with broader applicability for growing urban and rural demands. The Model AA made its public debut at the 1928 New York Auto Show, with initial customer deliveries commencing in early 1928. Design objectives emphasized reduced weight for improved maneuverability and economy, alongside compatibility for diverse delivery and hauling tasks in both city and countryside settings. Early reception was enthusiastic, bolstering Ford's recovery from Model T sales slumps; approximately 63,000 Model AA trucks were produced in 1928, underscoring the model's immediate commercial viability.

Production Timeline

The Ford Model AA entered production in December 1927 as a companion to the Model A passenger car, with full-scale manufacturing commencing at Ford's plant in January 1928. By 1929, output had expanded across multiple U.S. facilities, including the Highland Park plant in and the assembly operations in , leveraging Ford's network of 36 domestic plants to meet growing demand for commercial vehicles. Total U.S. production reached approximately 483,000 units by the close of 1932. Annual production volumes reflected initial growth followed by economic pressures. In 1928, around 63,000 units were built, rising to a peak of 156,000 in 1929 amid strong market adoption. Output held steady at about 159,000 units in 1930 before declining sharply to 104,000 in 1931 and fewer than 4,000 in 1932, as the 1929 stock market crash and ensuing halved automotive demand and forced widespread production cutbacks across the industry. Key milestones included the integration of advanced techniques pioneered at Highland Park, which enabled efficient scaling of AA chassis and body production shared with the Model A line. These efficiencies contributed to Ford's ability to produce over a million vehicles annually by , including trucks. Overseas licensing began in under a technology transfer agreement, with the facility in the adding more than 985,000 units from 1932 to 1950. Production of the Model AA wound down in December 1931, supplanted by the more powerful Model BB equipped with a to address evolving commercial needs and competitive pressures. Final assemblies in early 1932 focused on clearing remaining inventory amid the deepening economic downturn.

Design and Engineering

Chassis and Mechanical Components

The Ford Model AA chassis was built on a reinforced ladder frame of pressed steel, providing enhanced durability for commercial trucking demands compared to the lighter Model A passenger car frame. This design featured standard channel steel frame rails optimized for body mounting and load distribution. The standard wheelbase measured 131.5 inches, with a longer 157-inch option introduced in 1930 to support extended body configurations such as platforms or stake beds. The suspension system emphasized simplicity and load-bearing capacity, employing a transverse at the front, centered within the over the for stable handling. At the rear, longitudinal cantilever were used, sometimes supplemented with helper springs to manage payloads up to 1.5 tons. These heavier-duty components, reinforced for loads, distinguished the AA from the Model A while sharing basic engine mounting points for manufacturing efficiency. Braking relied on a mechanical system with internal-expanding at all four wheels, actuated via a central pull for reliable under load. In , the system was upgraded with larger 14-inch drums on all wheels and a heavy-duty pedal. utilized a worm-and-sector gear assembly, delivering responsive control suited to the truck's commercial role. Body mounting on the AA chassis allowed flexibility for wooden or all-metal cabs, with integral fenders and running boards as standard features to facilitate everyday utility. The frame's construction included a pressed-steel shell for corrosion resistance and structural integrity, while optional vacuum-assisted wipers provided improved visibility in adverse conditions.

Engine and Powertrain

The Ford Model AA utilized the same inline four-cylinder engine as the passenger Model A, featuring an L-head (side-valve) design with a cast-iron block and aluminum pistons for reduced weight and improved . This engine displaced 200.5 cubic inches (3.3 L), achieved through a bore of 3.875 inches and a of 4.125 inches, and incorporated a carburetor for fuel delivery. The electrical system relied on a 6-volt battery and generator, providing reliable starting and ignition via a coil and setup typical of the era. Output from this powerplant reached 40 horsepower at 2,200 rpm and 128 lb-ft of at 1,000 rpm, offering adequate low-end pull for light- to medium-duty trucking tasks while maintaining simplicity in construction. The was , employing a torque tube to enclose the driveshaft for protection and alignment, connected to a semi-floating rear that allowed easier removal for . Transmission options included a standard three-speed manual with sliding gears (non-synchronized), requiring double-ing for smooth shifts, or an optional four-speed unit for heavier configurations; a single dry-plate transferred power from the . Final drive ratios varied by year and configuration, typically 5.17:1 for standard models (1928-1929 worm gear), with options up to 7.25:1 for heavier loads; 1930-1932 models used bevel gears at 5.14:1 or 6.6:1. Performance characteristics suited the Model AA for urban and rural delivery, with a top speed of approximately 45-50 mph when unloaded, though laden trucks often cruised at 35-45 mph for optimal efficiency. economy ranged from 15 to 20 miles per , influenced by load and terrain, supported by a 13-quart cooling system with a that relied on natural circulation rather than a for simplicity and cost savings. During production, minor refinements included a carburetor update with improved choke mechanisms for better cold-start performance, addressing early reports of flooding in low temperatures, but the core engine architecture remained unchanged until the introduction of the V8-powered Model BB in 1932.

Variants and Configurations

Standard Truck Models

The Ford Model AA's standard truck models encompassed factory-produced configurations designed for general commercial use, with the open cab stake truck serving as the most prevalent body style rated for a 1.5-ton capacity. This model featured a flat platform bed suitable for versatile loading, often equipped with removable wooden stake sides for securing cargo. Other core offerings included the closed panel delivery van, which provided enclosed space for protected transport of goods, and the open pickup with a approximately 6.5-foot for lighter hauling tasks, alongside the chassis-cab option that allowed buyers to mount their own bodies while sharing the same robust mechanical foundation. These standard models typically utilized a 131.5-inch , accommodating an 8-foot cargo length in the stake configuration and supporting a gross rating (GVWR) of around 5,000 pounds to handle everyday loads effectively. Key features emphasized practicality, such as wooden sideboards on stake beds for easy height adjustment and drop-down tailgates to facilitate loading and unloading, making them well-suited for routine operations without specialized modifications. A longer 157-inch variant became available mid-production in 1930 for models requiring extended cargo areas, though the shorter standard remained dominant for urban and light-duty applications. The debuted at an accessible base price in , with factory body options increasing the by $100 to $300 depending on the configuration, enabling widespread among small businesses and fleets. Production emphasized high-volume output of these standard types, which constituted the majority of Model AA trucks built from late 1927 through 1932, reflecting Ford's focus on mass-market reliability. In practice, these trucks found extensive use in for transporting produce and supplies over rural roads, capitalizing on their durable frame and adequate power for duties. Urban delivery services, including parcel and distribution by retailers, also relied on the panel vans and pickups for their enclosed or open versatility in city environments, while stake models supported site .

Specialized and Custom Variants

The Ford Model AA served as a versatile platform for factory-produced specialized bodies tailored to niche commercial and service roles, often utilizing extended variants to accommodate unique payloads. School buses, typically seating up to 32 passengers, were built on lengthened AA to provide reliable rural transportation, with examples featuring all-steel bodies fabricated by coachbuilders such as those in . Ambulances based on the Model AA incorporated medical stretchers, sirens, and enclosed patient compartments for emergency response, reflecting the truck's adaptability for urban service fleets. Tow trucks, equipped with winches and booms for , represented a practical heavy-duty application, with surviving examples demonstrating the AA's robust frame under operational stress. Aftermarket modifications expanded the Model AA's utility for industry-specific tasks, frequently involving third-party conversions on chassis-cab models. Refrigerated bodies, cooled by systems, were common for and delivery, enabling perishable goods transport in urban markets; a notable 1929 variant featured an insulated box. Flatbed configurations with removable side stakes facilitated hauling bulk materials, including timber in operations, where the AA's 1.5-ton capacity proved sufficient for regional work. conversions, often with manual or early hydraulic tipping mechanisms, allowed for efficient unloading of gravel, coal, or refuse, enhancing the vehicle's role in construction and . These specialized and custom variants were produced in low volumes compared to standard models, with Ford's assembly lines outputting limited runs—such as around 685 school and passenger buses—while most bodies were crafted by independent coachbuilders like or Manley Manufacturing for tailored applications. Overall, of the approximately 482,850 Model AAs manufactured from 1928 to 1932, these niche adaptations accounted for a small fraction, underscoring their role in addressing diverse commercial demands without altering the core mechanical design.

International Production

Licensed Manufacturing Abroad

In 1929, Ford Motor Company pursued international expansion through licensing agreements to manufacture the Model AA truck abroad, enabling production tailored to local markets while circumventing import tariffs and navigating the economic challenges of the . The most significant pact was signed on May 31, 1929, between Ford and the Soviet government, granting a for the of a major assembly in (later renamed Gorky) on the River, along with an initial assembly facility in ; under the terms, the Soviets committed to purchasing 72,000 unassembled Ford vehicles, including Model AA trucks, over nine years at a value of $30 million, with Ford providing technical oversight and initial parts kits. Similar arrangements were established through Ford's subsidiaries in other countries, including Ford of Canada in , which began Model AA production in 1928 with right-hand drive configurations to suit local driving conventions; Ford Britain at the plant near , where the first Model AA rolled off the line on October 1, 1931, emphasizing assembly for domestic sales and export to markets; and Ford's Cologne facility in , which initiated Model AA truck production in 1931 as part of its focus on commercial vehicles for the European market. These licensing and subsidiary-based operations allowed Ford to ship U.S.-manufactured components initially, transitioning to local sourcing by 1933 in the Soviet plant to reduce costs and dependencies. Production at the Soviet Gorky Automobile Plant () commenced in 1932 with the , a direct licensed copy of the Model AA, achieving approximately 985,000 units through 1950, including variants like the GAZ-MM; this output far outlasted U.S. production, which ended in 1932, and represented the bulk of international Model AA manufacturing. In , Ford of produced Model AA units from 1928 to 1932 at Windsor, incorporating adaptations like dual rear wheels for heavier payloads while maintaining core design fidelity. The and German plants focused on smaller-scale local assembly, contributing to a combined international total exceeding 1 million units by leveraging Ford's global strategy to sustain the model's viability amid domestic economic pressures.

Adaptations in Foreign Markets

In the , the Ford Model AA was licensed and produced as the starting in 1932, with modifications to better suit harsh local conditions and operational needs. The chassis was reinforced, including strengthened clutch housing and steering gear, to support a of approximately 3,300 lb (1,500 kg). These changes enhanced durability for rugged terrain and heavy use, while the truck retained the core 3.3-liter inline-four engine from the original design. Following the 1929 licensing agreement with Ford, the GAZ-AA evolved into the GAZ-MM variant in 1938, incorporating wartime simplifications such as an upgraded 50 hp engine, optional doorless cabs, front brakes, and reinforced leaf springs paired with military-grade tires for improved off-road performance. Production of the GAZ-AA and GAZ-MM totaled around 985,000 units through 1950, making it a cornerstone of Soviet transportation. These trucks were militarized extensively for the during , with approximately 150,000 GAZ-AA and GAZ-MM in service by 1941 for , troop transport, and towing like 37 mm anti-tank guns. In civilian applications, the GAZ-AA served as vital transport for collective farms, hauling agricultural goods across vast rural areas. The prolonged production of the GAZ-MM into the had lasting influence on Soviet automotive design, paving the way for successors like the medium-duty truck introduced in 1946, which built on the AA's mechanical foundations with modernized features. In other foreign markets, the Model AA saw localized adaptations beyond mere assembly. Canadian production included right-hand drive configurations tailored for British Commonwealth export, accommodating left-side road driving conventions. German versions incorporated metric gauges and heavier axles to comply with European road standards and measurement systems. Notable applications included conversions in the UK for postal services and extended-bed utility variants in for transport, highlighting the model's versatility in diverse environments.

Legacy and Modern Use

Historical Impact

The Ford Model AA played a pivotal role in bolstering the U.S. economy during the late 1920s and early years of the Great Depression by providing an affordable and reliable light-duty truck that facilitated commerce and supported small businesses. Priced starting at $395 for the open-cab pickup, it enabled farmers, merchants, and entrepreneurs to transport goods efficiently over poor roads, contributing to the modernization of rural and urban logistics at a time when horse-drawn wagons were still common. This accessibility helped sustain economic activity amid rising unemployment and falling demand, with Ford's truck output underscoring the company's resilience as U.S. automotive industry production plummeted from over 5 million units in 1929 to under 1.3 million by 1932, while Ford produced about 432,000 vehicles in 1932. In the , the Model AA standardized key elements of light-duty , including integrated cabs and versatile chassis options that influenced subsequent models and competitors. It laid the groundwork for Ford's transition to more powerful V8-equipped trucks like the 1932 Model BB, while its enclosed cab and payload capabilities—up to 1.5 tons—prompted rivals such as Chevrolet to adopt similar integrated designs in their early offerings to capture . With approximately 480,000 units produced, the Model AA exemplified Ford's mass-production prowess, bridging the gap from the outdated Model TT to modern commercial vehicles and solidifying the as an essential industry segment. Culturally, the Model AA became an enduring symbol of American resilience, frequently appearing in depictions of the migrations and struggles representing the era's migratory workforce heading west in search of opportunity. It served as a precursor to applications, with some units tested and adopted in limited numbers by the U.S. and for roles before , highlighting its rugged versatility beyond civilian use. Overall, the Model AA's legacy lies in accelerating the shift from horse-drawn transport to motorized commerce, with its production success reflecting Ford's dominance in democratizing vehicle ownership and industrial efficiency.

Preservation and Contemporary Applications

The Ford Model AA, as a commercial variant of the Model A series, has seen dedicated preservation efforts through enthusiast organizations, with several thousand original examples believed to survive , many stored in barns or displayed in museums. These numbers reflect the vehicle's rugged construction and widespread use, though complete trucks remain rarer than passenger cars due to heavier wear from commercial service. In former Soviet states, the licensed variant is more abundant, with numerous examples persisting as cultural artifacts from wartime and industrial history. Restoration practices emphasize authenticity while incorporating practical modernizations, supported by robust parts availability from clubs like the Model A Ford Club of America (MAFCA) and the Model A Restorers Club, which offer reproduction kits and components for builds typically costing $5,000 to $15,000 depending on condition and scope. Common upgrades include electric fuel pumps to improve reliability without altering the original 40-horsepower inline-four engine's character. Annual events such as the Hershey AACA Fall Meet attract over 1,000 Model A vehicles, including numerous AAs, fostering community-driven restorations and showcasing restored examples in judged classes. In contemporary applications, preserved Model AAs frequently appear in parades, hot-rodding customizations like chopped cabs for car shows, and as period-accurate props in films, such as the 2023 production Killers of the Flower Moon and the 2009 film Public Enemies. Limited operational use persists in developing regions for light farm tasks, leveraging the truck's simple mechanics. As of 2025, restored Model AAs command values of $20,000 to $50,000 at auctions, driven by collector demand. Enthusiast prototypes for electric vehicle (EV) conversions, adapting bolt-in kits originally designed for Model A chassis at around $25,000, are emerging to extend usability while preserving vintage aesthetics. Internationally, GAZ-AA rallies like Russia's Field of Battle military history festival and Fortuna retro transport events highlight ongoing preservation in successor states.

References

  1. https://aafords.com/aa-information/
  2. https://www.oldcarsweekly.com/features/car-of-the-week-1930-ford-model-aa
  3. https://www.thehenryford.org/collections-and-research/digital-collections/artifact/454808
  4. https://www.conceptcarz.com/s21995/ford-model-aa.aspx
  5. https://media.ford.com/content/fordmedia/img/me/en/news/2017/07/31/once-upon-a-t--ford-celebrates-a-century-writing-truck-history.html
  6. https://media.ford.com/content/fordmedia/feu/gb/en/news/2021/10/08/ford-dagenham-celebrates-90-years-as-londons-largest-manufacturi.html
  7. https://truck-encyclopedia.com/ww2/us/Ford-BB.php
  8. https://iowa80truckingmuseum.com/exhibits-list/ford-model-aa-2-1-2-ton-201-ci-4-cylinder/166/
  9. https://aafords.com/p-links/overview/
  10. https://www.autonews.com/article/20181204/CCHISTORY/181209882/ford-unwraps-the-model-a-successor-to-the-model-t/
  11. https://www.thehenryford.org/collections-and-research/digital-collections/expert-sets/105715/
  12. https://corporate.ford.com/articles/history/the-1928-ford-model-a.html
  13. https://blueprintengines.com/blogs/news/the-ford-model-a-a-brief-history
  14. https://auto.howstuffworks.com/1930-1939-ford-trucks.htm
  15. https://www.thehenryford.org/collections-and-research/digital-collections/artifact/257664/
  16. https://www.caranddriver.com/features/g23897696/ford-f-series-pickup-truck-history/
  17. http://www.ahooga.com/info/product.shtml
  18. https://mafca.com/data-aplants-production/
  19. https://www.ebsco.com/research-starters/history/american-automobile-industry-1930s
  20. https://corporate.ford.com/articles/history/highland-park.html
  21. https://www.rbth.com/science-and-tech/328091-12-trucks-that-are-pride
  22. https://news.classicindustries.com/ford-trucks-built-tougher-with-parts-from-classic-industries-1932-2017
  23. https://autorestorer.com/articles/1930_model_aa_ford_truck-1335
  24. https://aafords.com/aa-chassis/aa-2000-brake-systems/
  25. https://macsmotorcitygarage.com/power-to-the-people-the-ford-model-a-engine-1928-31/
  26. https://www.ecklers.com/model-a-ford-piston-set-aluminum-with-fitted-pins-model-a-b-choose-your-size-28-32051-1.html
  27. https://www.fordgarage.com/pages/atransmissioncases.htm
  28. https://aafords.com/aa-chassis/aa-4000-rear-axle/
  29. https://www.themotormuseuminminiature.co.uk/1930-ford-model-aa-produce-truck.php
  30. https://www.fordbarn.com/forum/showthread.php?t=196799
  31. https://auto.howstuffworks.com/1930-1931-ford-model-a-truck.htm
  32. https://www.farmcollector.com/equipment/ford-model-aa-truck/
  33. https://hsmc-fl.com/1931-ford-model-aa-school-bus-climb-aboard-our-bus/
  34. https://www.thehenryford.org/collections-and-research/digital-collections/artifact/481986
  35. https://www.hemmings.com/stories/model-aa-rarities-unusual-commercial-fords/
  36. https://rmsothebys.com/auctions/hf12/lots/r242-1929-ford-model-aa-ton-good-humor-ice-cream-truck/
  37. https://www.hemmings.com/stories/a-tilting-bed-1930-ford-model-aa-eschews-refinement-and-speed-for-utter-hauling-capability/
  38. https://www.fordbarn.com/forum/showthread.php?p=1975996
  39. https://www.history.com/this-day-in-history/may-31/ford-signs-agreement-with-soviet-union
  40. https://www.ford.ca/about-ford/heritage/ford-trucks/
  41. https://www.automotivemanufacturingsolutions.com/oems/ford-upgrades-its-cologne-plant-to-be-the-european-electrification-centre/527505
  42. https://truck-encyclopedia.com/ww2/ussr/GAZ-AA.php
  43. https://truck-encyclopedia.com/ww2/ussr/GAZ-MM.php
  44. https://www.thehenryford.org/collections-and-research/digital-collections/artifact/146409
  45. https://askus.thehenryford.org/researchguides/faq/375607
  46. https://auto.howstuffworks.com/1920-1929-ford-trucks.htm
  47. https://barnfinds.com/grapes-of-wrath-1931-ford-model-a-tudor/
  48. https://www.fordbarn.com/forum/showthread.php?t=80866
  49. https://mafca.com/
  50. https://model-a-ford.org/
  51. https://www.hemmings.com/stories/walking-the-fields-at-the-aacas-2024-hershey-meet/
  52. https://www.imcdb.org/vehicles_make-Ford_model-Model%2BAA.html
  53. https://bids.aumannauctions.com/auctions/30534/lot/4820082-ford-model-aa-flatbed-truck-used-in-movies-has-title
  54. https://abc7news.com/archive/6872017/
  55. https://www.classic.com/m/ford/model-aa/
  56. https://evcube.net/turn-your-1920s-ford-model-a-into-an-ev-for-25k/
  57. https://www.shutterstock.com/image-photo/dubosekovo-russia-july-13-gazaa-retro-152351612
  58. https://www.alamy.com/kronshtadt-russia-august-14-2019-sanitary-car-gaz-aa-55-1941-participant-of-the-festival-of-retro-transport-fortuna-2019-image333033831.html
Add your contribution
Related Hubs
User Avatar
No comments yet.