Hubbry Logo
IMT AdvancedIMT AdvancedMain
Open search
IMT Advanced
Community hub
IMT Advanced
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
IMT Advanced
IMT Advanced
IMT Advanced
View on Wikipedia
from Wikipedia
Part of a series on the
Wireless network technologies
Analog
Digital
Mobile telecommunications

International Mobile Telecommunications-Advanced (IMT-Advanced Standard) are the requirements issued by the ITU Radiocommunication Sector (ITU-R) of the International Telecommunication Union (ITU) in 2008 for what is marketed as 4G (or in Turkey as 4.5G[1][2][3]) mobile phone and Internet access service.

4G

[edit]

Description

[edit]

An IMT-Advanced system is expected to provide a comprehensive and secure all-IP based mobile broadband solution to laptop computer wireless modems, smartphones, and other mobile devices. Facilities such as ultra-broadband Internet access, voice over IP, gaming services, and streamed multimedia may be provided to users.

IMT-Advanced is intended to accommodate the quality of service (QoS) and rate requirements set by further development of existing applications like mobile broadband access, Multimedia Messaging Service (MMS), video chat, mobile TV, but also new services like high-definition television (HDTV). 4G may allow roaming with wireless local area networks and may interact with digital video broadcasting systems. It was meant to go beyond the International Mobile Telecommunications-2000 requirements, which specify mobile phones systems marketed as 3G.

Requirements

[edit]

Specific requirements of the IMT-Advanced report included:

  • Based on an all-IP packet switched network.[4]
  • Interoperability with existing wireless standards.[5]
  • A nominal data rate of 100 Mbit/s while the client physically moves at high speeds relative to the station, and 1 Gbit/s while the client and station are in relatively fixed positions.[6]
  • Dynamically share and use network resources to support more simultaneous users per cell.
  • Scalable channel bandwidth 5–20 MHz, optionally up to 40 MHz[7][8]
  • Peak link spectral efficiency of 15 bit/s/Hz in the downlink and 6.75 bit/s/Hz in the uplink (meaning that 1 Gbit/s in the downlink should be possible over less than 67 MHz bandwidth)
  • System spectral efficiency of up to 3 bit/s/Hz/cell in the downlink and 2.25 bit/s/Hz/cell for indoor usage[7]
  • Seamless connectivity and global roaming across multiple networks with smooth handovers[4][9]
  • Ability to offer high-quality service for multimedia support

The first set of 3GPP requirements on LTE Advanced was approved in June 2008.[10]

A summary of the technologies that have been studied as the basis for LTE Advanced is included in a technical report.[11]

While the ITU adopts requirements and recommendations for technologies that would be used for future communications, they do not actually perform the development work themselves, and countries do not consider them binding standards. Other trade groups and standards bodies such as the Institute of Electrical and Electronics Engineers, the WiMAX Forum, and 3GPP also have a role.

Principal technologies

[edit]

Physical layer transmission techniques expected to be used include:[12]

  • MIMO: To attain ultra-high spectral efficiency using spatial processing including multi-antenna and multi-user MIMO
  • Frequency-domain-equalization, for example "multi-carrier modulation" (OFDM) in the downlink or "single-carrier frequency-domain-equalization" (SC-FDE) in the uplink: To exploit the frequency selective channel property without complex equalization.
  • Frequency-domain statistical multiplexing, for example (OFDMA) or (single-carrier FDMA) (SC-FDMA, Linearly precoded OFDMA, LP-OFDMA) in the uplink: Variable bit rate by assigning different sub-channels to different users based on the channel conditions
  • Turbo principle error-correcting codes: To minimize the required signal-to-noise ratio at the reception side
  • Channel-dependent scheduling: To utilize the time-varying channel.
  • Link adaptation: Adaptive modulation and error-correcting codes.
  • Relaying, including fixed relay networks, and the cooperative relaying concept, known as multi-mode protocol.

Predecessors

[edit]

Long Term Evolution

[edit]
Telia-branded Samsung LTE modem

Long Term Evolution (LTE) has a theoretical net bitrate maximum capacity of 100 Mbit/s in the downlink and 50 Mbit/s in the uplink if a 20 MHz channel is used. The capacity is more if a MIMO (multiple-input and multiple-output) antenna array is used. The physical radio interface was at an early stage named "High-Speed Orthogonal Packet Access" and is now named E-UTRA.

The CDMA's spread spectrum radio technology that was used in 3G systems and cdmaOne has been abandoned. It was replaced by orthogonal frequency-division multiple access and other frequency-division multiple access schemes. This is combined with MIMO antenna arrays, dynamic channel allocation, and channel-dependent scheduling.

The first publicly available LTE services were branded "4G" and opened in Sweden's capital city Stockholm (Ericsson system) and Norway's capital city Oslo (a Huawei system) on 14 December 2009. The user terminals were manufactured by Samsung.[13] All three major U.S. wireless carriers offer LTE services.

In South Korea, SK Telecom and LG U+ have enabled access to LTE service since July 2011 for data devices, slated to go nationwide by 2012.[14]

Mobile WiMAX (IEEE 802.16e)

[edit]

The Mobile WiMAX (IEEE 802.16e-2005) mobile wireless broadband access (MWBA) standard (marketed as WiBro in South Korea) is sometimes branded 4G, and offers peak data rates of 128 Mbit/s downlink and 56 Mbit/s uplink over 20 MHz wide channels.[citation needed]

The first commercial mobile WiMAX service was opened by KT in Seoul, South Korea in June 2006.[15]

In September 2008, Sprint Nextel marketed Mobile WiMAX as a "4G" network even though it did not fulfill the IMT Advanced requirements.[16]

In Russia, Belarus, and Nicaragua, WiMax broadband internet access is offered by the Russian company Scartel and is also branded 4G, Yota.

Data speeds of WiMAX
WiMAX
Peak download 128 Mbit/s
Peak upload 56 Mbit/s

Ultra Mobile Broadband

[edit]
Main article: Ultra Mobile Broadband

Ultra Mobile Broadband (UMB) was the brand name for a discontinued 4G project within the 3GPP2 standardization group to improve the CDMA2000 mobile phone standard for next-generation applications and requirements. In November 2008, Qualcomm, UMB's lead sponsor, announced it was ending development of the technology, favoring LTE instead.[17] The objective was to achieve data speeds over 275 Mbit/s downstream and over 75 Mbit/s upstream.

Flash-OFDM

[edit]

At an early stage, the Flash-OFDM system was expected to be further developed into a 4G standard.

iBurst and MBWA

[edit]

The iBurst technology, using High Capacity Spatial Division Multiple Access (HC-SDMA), was at an early stage considered as a 4G predecessor. It was incorporated by the Mobile Broadband Wireless Access (MBWA) working group into the IEEE 802.20 standard in 2008.[18]

Candidate systems

[edit]

In October 2010, ITU-R Working Party 5D approved two industry-developed technologies.[19] On December 6, 2010, ITU noted that while current versions of LTE, WiMax and other evolved 3G technologies do not fulfill IMT-Advanced requirements for 4G, some may use the term "4G" in an "undefined" fashion to represent forerunners to IMT-Advanced that show "a substantial level of improvement in performance and capabilities with respect to the initial third generation systems now deployed."[20]

LTE Advanced

[edit]

LTE Advanced (Long-term-evolution Advanced) was formally submitted by the 3GPP organization to ITU-T in the fall of 2009, and was released in 2011. The target of 3GPP LTE Advanced was to reach and surpass the ITU requirements.[21] LTE Advanced is an improvement on the existing LTE network. Release 10 of LTE is expected to achieve the LTE Advanced speeds. Release 8 in 2009 supported up to 300 Mbit/s download speeds which were still short of the IMT-Advanced standards.[22]

WiMAX Release 2 (IEEE 802.16m)

[edit]

The WirelessMAN-Advanced evolution of IEEE 802.16e was published in May 2011 as standard IEEE 802.16m-2011. The relevant industry promoting the technology gave it the marketing name of WiMAX Release 2. It had an objective to fulfill the IMT-Advanced criteria.[23][24] The IMT-Advanced group formally approved this technology as meeting its criteria in October 2010.[25] In the second half of 2012, the 802.16m-2011 standard was rolled up into the 802.16-2012 standard, excluding the WirelessMAN-Advanced radio interface part of the 802.16m-2011 standard, which got moved to IEEE Std 802.16.1-2012.

Comparison

[edit]

The following table shows a comparison of IMT-Advanced candidate systems as well as other competing technologies.

Comparison of mobile Internet access methods
Common
name		 Family Primary use Radio tech Downstream
(Mbit/s)		 Upstream
(Mbit/s)		 Notes
HSPA+ 3GPP Mobile Internet CDMA/TDMA/FDD
MIMO		 21
42
84
672		 5.8
11.5
22
168		 HSPA+ is widely deployed. Revision 11 of the 3GPP states that HSPA+ is expected to have a throughput capacity of 672 Mbit/s.
LTE 3GPP Mobile Internet OFDMA/TDMA/MIMO/SC-FDMA/for LTE-FDD/for LTE-TDD 100 Cat3
150 Cat4
300 Cat5
25065 Cat17
1658 Cat19
(in 20 MHz FDD) [26]
 50 Cat3/4
75 Cat5
2119 Cat17
13563 Cat19
(in 20 MHz FDD)[26]		 LTE-Advanced Pro offers rates in excess of 3 Gbit/s to mobile users.
WiMax rel 1 802.16 WirelessMAN MIMO-SOFDMA 37 (10 MHz TDD) 17 (10 MHz TDD) With 2x2 MIMO.[27]
WiMax rel 1.5 802.16-2009 WirelessMAN MIMO-SOFDMA 83 (20 MHz TDD)
141 (2x20 MHz FDD)		 46 (20 MHz TDD)
138 (2x20 MHz FDD)		 With 2x2 MIMO.Enhanced with 20 MHz channels in 802.16-2009[27]
WiMAX rel 2.0 802.16m WirelessMAN MIMO-SOFDMA 2x2 MIMO
110 (20 MHz TDD)
183 (2x20 MHz FDD)
4x4 MIMO
219 (20 MHz TDD)
365 (2x20 MHz FDD)		 2x2 MIMO
70 (20 MHz TDD)
188 (2x20 MHz FDD)
4x4 MIMO
140 (20 MHz TDD)
376 (2x20 MHz FDD)		 Also, low mobility users can aggregate multiple channels to get a download throughput of up to 1 Gbit/s[27]
Flash-OFDM Flash-OFDM Mobile Internet
mobility up to 200 mph (350 km/h)		 Flash-OFDM 5.3
10.6
15.9		 1.8
3.6
5.4		 Mobile range 30 km (18 miles)
Extended range 55 km (34 miles)
HIPERMAN HIPERMAN Mobile Internet OFDM 56.9
Wi-Fi 802.11
(11ax)		 Wireless LAN OFDM/OFDMA/CSMA/MIMO/MU-MIMO/Half duplex 9600 Wi-Fi 6

Antenna, RF front end enhancements and minor protocol timer tweaks have helped deploy long range P2P networks compromising on radial coverage, throughput and/or spectra efficiency (310 km & 382 km)

iBurst 802.20 Mobile Internet HC-SDMA/TDD/MIMO 95 36 Cell Radius: 3–12 km
Speed: 250 km/h
Spectral Efficiency: 13 bits/s/Hz/cell
Spectrum Reuse Factor: "1"
EDGE Evolution GSM Mobile Internet TDMA/FDD 1.6 0.5 3GPP Release 7
UMTS W-CDMA
HSPA (HSDPA+HSUPA) 		3GPP Mobile Internet CDMA/FDD

CDMA/FDD/MIMO		 0.384
14.4		 0.384
5.76		 HSDPA is widely deployed. Typical downlink rates today 2 Mbit/s, ~200 kbit/s uplink; HSPA+ downlink up to 56 Mbit/s.
UMTS-TDD 3GPP Mobile Internet CDMA/TDD 16 Reported speeds according to IPWireless using 16QAM modulation similar to HSDPA+HSUPA
EV-DO Rel. 0
EV-DO Rev.A
EV-DO Rev.B 		3GPP2 Mobile Internet CDMA/FDD 2.45
3.1
4.9xN		 0.15
1.8
1.8xN		 Rev B note: N is the number of 1.25 MHz carriers used. EV-DO is not designed for voice, and requires a fallback to 1xRTT when a voice call is placed or received.

Notes: All speeds are theoretical maximums and will vary by a number of factors, including the use of external antennas, distance from the tower and the ground speed (e.g. communications on a train may be poorer than when standing still). Usually the bandwidth is shared between several terminals. The performance of each technology is determined by a number of constraints, including the spectral efficiency of the technology, the cell sizes used, and the amount of spectrum available.

For more comparison tables, see bit rate progress trends, comparison of mobile phone standards, spectral efficiency comparison table and OFDM system comparison table.


References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

IMT Advanced

View on Grokipedia
from Grokipedia
International Mobile Telecommunications-Advanced (IMT-Advanced) is a global standard developed by the International Telecommunication Union Radiocommunication Sector (ITU-R) for fourth-generation (4G) mobile broadband networks, extending beyond the capabilities of IMT-2000 (3G) to enable advanced services such as high-speed internet access, unified messaging, and interactive broadband multimedia applications through packet-based mobile and fixed networks. Finalized at the ITU Radiocommunication Assembly in January 2012, it establishes technical performance requirements for radio interfaces that support a wide range of mobilities, from stationary to high-speed vehicular (up to 350 km/h), with peak spectral efficiencies of 15 bit/s/Hz in the downlink and 6.75 bit/s/Hz in the uplink, translating to maximum data rates of up to 1 Gbps for low-mobility users and 100 Mbps for high-mobility scenarios in wide bandwidths (e.g., 100 MHz). Key requirements for IMT-Advanced systems emphasize enhanced user experience and network efficiency, including cell spectral efficiencies ranging from 3 bit/s/Hz/cell (downlink, indoor) to 1.1 bit/s/Hz/cell (downlink, high-speed vehicular), cell-edge user spectral efficiencies as low as 0.04 bit/s/Hz (downlink, high-speed), and low latency with user-plane delays under 10 ms and control-plane transitions below 100 ms under unloaded conditions. These criteria also mandate support for scalable bandwidths up to 40 MHz (with encouragement for 100 MHz), seamless handover interruption times of 27.5 ms (intra-frequency) to 60 ms (inter-band), and VoIP capacity of at least 30-50 active users per sector per MHz depending on the environment. The standard ensures interoperability with legacy systems and is designed for all-IP packet-switched networks, facilitating global roaming and diverse applications like video telephony and mobile TV. The development of IMT-Advanced began in the mid-2000s as part of ITU-R's vision for future mobile systems, with initial requirements outlined in Report ITU-R M.2134 (2008) and evaluation guidelines in Report ITU-R M.2135 (2009), leading to a submission process where candidate radio interface technologies (RITs) were assessed by independent evaluation groups. LTE-Advanced (developed by 3GPP) and IEEE 802.16m (WirelessMAN-Advanced) were approved as the first technologies meeting IMT-Advanced specifications at the ITU-R Study Group 5 meeting in November 2010, with final agreement on the specifications at the Radiocommunication Assembly in January 2012, marking the official definition of 4G. Commercial deployments commenced around 2013, primarily via LTE-Advanced, which has become dominant worldwide, while WirelessMAN-Advanced saw limited adoption. Additional spectrum allocations for IMT, including for IMT-Advanced systems, were identified at the World Radiocommunication Conference in 2015 (WRC-15), such as bands around 700 MHz and 3.4-3.6 GHz, with further identifications at WRC-19 to support growing demand for mobile broadband. IMT-Advanced laid the groundwork for subsequent generations, influencing () by prioritizing , enhanced mobility support, and quality-of-service mechanisms for . Its impact includes widespread adoption enabling ubiquitous high-speed connectivity, though challenges like spectrum scarcity and energy efficiency have driven ongoing refinements.

Introduction

Definition and Scope

IMT-Advanced represents the set of requirements defined by the for mobile telecommunications systems, as outlined in Report ITU-R M.2134 (2008). These systems are designed as mobile platforms that extend beyond the capabilities of previous International Mobile Telecommunications (IMT) generations, particularly IMT-2000, by emphasizing all-IP packet-switched networks to deliver voice, data, and multimedia services efficiently. The scope of IMT-Advanced encompasses the provision of advanced mobile services, including high-speed , video streaming, and high-quality applications, while supporting seamless global through interworking with diverse radio access technologies. It targets a broad spectrum of mobility scenarios, from low-mobility applications such as nomadic and pedestrian use to high-mobility environments like vehicular and operations, ensuring robust performance across various deployment conditions. A core principle of IMT-Advanced is its with earlier IMT systems and fixed networks, allowing for smooth integration and evolution without disrupting existing infrastructure, while introducing enhanced capabilities such as improved to accommodate growing demands for bandwidth-intensive services.

Relation to 4G

IMT-Advanced serves as the official designation by the (ITU) for true standards, representing a significant evolution from previous generations with enhanced performance criteria such as peak data rates of up to 1 Gbps for low-mobility scenarios and 100 Mbps for high-mobility use. This framework ensures global harmonization of radio interfaces capable of supporting advanced multimedia services and higher spectrum efficiency. In contrast, earlier systems like the initial releases of Long-Term Evolution (LTE), specifically 3GPP Release 8, were often marketed by operators and vendors as "4G" despite not fully meeting IMT-Advanced requirements; classified by the ITU as evolutions of (IMT-2000), commonly referred to in the industry as 3.9G, due to their transitional nature between IMT-2000 () and full IMT-Advanced capabilities. These pre-IMT-Advanced deployments, including early LTE and HSPA+, provided improved speeds over but did not fully satisfy the performance requirements of IMT-Advanced, such as peak data rates of 1 Gbps for low mobility and enhanced spectral efficiencies. The widespread commercial adoption of the "" label predated formal ITU approval, driven by industry bodies such as the , which promoted LTE technologies to accelerate market uptake and consumer awareness, even when they fell short of strict IMT-Advanced criteria. This led to a loose, marketing-oriented usage of the term beyond ITU definitions, with service providers branding non-compliant systems as to highlight performance gains over . Only technologies fully satisfying all IMT-Advanced specifications qualify as official , with the ITU Radiocommunication Assembly (RA-12) approving the standards in January 2012, confirming LTE-Advanced and WirelessMAN-Advanced as the inaugural compliant systems.

History and Development

ITU Standardization Process

The Radiocommunication Sector () plays a central role in standardizing International Mobile Telecommunications (IMT) systems, with Working Party 5D (WP 5D) responsible for coordinating the development of technical specifications and global spectrum harmonization for the terrestrial components of IMT-Advanced. WP 5D ensures that IMT-Advanced technologies meet defined criteria for performance, compatibility, and spectrum efficiency, facilitating worldwide deployment. The standardization process begins with the issuance of a Circular Letter by in 2008, inviting submissions of candidate radio interface technologies (RITs) for IMT-Advanced. Candidate technologies undergo self-evaluation against the performance requirements in Report ITU-R M.2134 and the evaluation guidelines in Report ITU-R M.2135, followed by independent evaluations conducted by ITU-appointed groups of experts. The process culminates in consensus-building at assemblies, where approved specifications are incorporated into ITU Recommendations, such as Recommendation ITU-R M.2012. A key aspect of the process emphasizes international collaboration among standards development organizations (SDOs), including the and the Institute of Electrical and Electronics Engineers (IEEE), to promote and seamless global roaming. This coordination extends to spectrum allocation efforts through World Radiocommunication Conferences (WRC), ensuring harmonized frequency bands for IMT-Advanced systems.

Key Milestones

The development of IMT-Advanced built upon the foundational standards of IMT-2000, which were established by the ITU in 2000 as the initial framework for third-generation () mobile telecommunications systems, providing the basis for global and advanced mobile services. In , the published Report M.2134, outlining detailed technical performance requirements for IMT-Advanced radio interfaces, including criteria for peak data rates, spectrum efficiency, and mobility support; this was accompanied by Circular Letter 5/LCCE/2, which formally invited submissions of candidate radio interface technologies (RITs) and sets of RITs (SRITs) for evaluation. Between 2009 and 2010, candidate technologies, including proposals from and IEEE, submitted comprehensive self-evaluations demonstrating compliance with IMT-Advanced requirements, while the initial commercial launch of LTE (3GPP Release 8) occurred in December 2009 as a pre-IMT-Advanced system focused on enhanced 3G capabilities. In 2010, Release 2, based on IEEE 802.16m, received approval from the IEEE 802.16 as a candidate IMT-Advanced technology following successful evaluation against ITU criteria. The following year, in 2011, 3GPP finalized and approved LTE-Advanced under Release 10, incorporating features such as and enhanced to meet IMT-Advanced performance targets. In January 2012, at the ITU Radiocommunication Assembly (RA-12) in , both LTE-Advanced and Release 2 (IEEE 802.16m) were officially recognized and incorporated into Recommendation ITU-R M.2012 as the first IMT-Advanced technologies, marking the completion of the standardization process. Following 2012, enhancements to IMT-Advanced continued through revisions to Recommendation ITU-R M.2012, which detailed terrestrial radio interface specifications and incorporated ongoing updates for improved capabilities; additionally, the World Radiocommunication Conference (WRC-15) in initiated studies and identified needs for future IMT development in bands such as 24.25-86 GHz under Resolution 238.

Technical Requirements

Performance Criteria

IMT-Advanced systems are required to achieve peak data rates of up to 1 Gbit/s in the downlink for low mobility scenarios and 500 Mbit/s in the uplink, while supporting 100 Mbit/s in the downlink at high mobility speeds of up to 350 km/h. targets for these systems reach up to 15 bit/s/Hz in the downlink and 6.75 bit/s/Hz in the uplink. Latency requirements include a control-plane transition time of less than 100 ms from idle to active state and a user-plane latency of less than 10 ms for small IP packets. Mobility support extends to speeds of up to 350 km/h, enabling low user data rates in high-speed environments. These performance criteria are facilitated by scalable bandwidth options ranging from 5 to 20 MHz, extendable to 40 MHz, and incorporate techniques such as and to enhance efficiency. Additional key criteria include cell spectral efficiency and cell-edge user spectral efficiency, measured in bit/s/Hz/cell and bit/s/Hz respectively, across deployment scenarios:
Deployment ScenarioCell Spectral Efficiency (DL/UL, bit/s/Hz/cell)Cell-Edge User Spectral Efficiency (DL/UL, bit/s/Hz)
Indoor3 / 2.250.1 / 0.07
Microcellular2.6 / 1.80.075 / 0.05
Base coverage urban2.2 / 1.40.06 / 0.03
High speed1.1 / 0.70.04 / 0.015
Cell-edge user is defined at the 5% point of the of normalized user throughput. interruption time requirements are 27.5 ms (intra-frequency), 40 ms (inter-frequency within a spectrum band), and 60 ms (inter-frequency between spectrum bands). VoIP capacity targets are at least 50 active users per sector per MHz (indoor), 40 (microcellular and base coverage urban), and 30 (high speed).

Spectrum and Operational Aspects

IMT-Advanced systems operate primarily within frequency bands allocated by the (ITU) between 700 MHz and 2.6 GHz to ensure wide coverage and capacity, including specific examples such as the 800 MHz, 1.8 GHz, and 2.6 GHz bands. These allocations stem from World Radiocommunication Conference (WRC) decisions, with WRC-07 initially identifying harmonized spectrum for IMT-2000 and extending suitability to IMT-Advanced in paired and unpaired arrangements below 2.69 GHz. Potential extensions to higher bands up to 6 GHz were considered in subsequent WRCs, such as WRC-15, which identified the 3.4-3.6 GHz range for IMT to support enhanced broadband applications while maintaining compatibility with lower-frequency deployments. To achieve peak performance, IMT-Advanced requires support for aggregated carrier bandwidths of up to 100 MHz, enabling across multiple bands for improved data rates and efficiency. Operational requirements for IMT-Advanced emphasize flexibility in duplex modes, mandating support for both frequency division duplex (FDD) and time division duplex (TDD) to accommodate diverse deployment scenarios and availability. FDD operations typically use paired with fixed separation for uplink and downlink, while TDD leverages unpaired bands for asymmetric traffic patterns, both facilitating global through harmonized arrangements defined in ITU recommendations. Coexistence with legacy systems, such as IMT-2000 (), is ensured via interference mitigation techniques and shared policies, allowing gradual migration without disrupting existing services. The ITU's World Radiocommunication Conferences have played a pivotal role in allocation for IMT-Advanced, with WRC-12 adopting Resolution 233 to initiate studies on frequency-related aspects, including needs estimated at 1280-1720 MHz by 2020 and candidate bands for . This resolution emphasized efficient use and interference avoidance, paving the way for WRC-15, which allocated additional IMT , such as 91 MHz in the 1427-1518 MHz band globally and further identifications in mid-band ranges to meet growing demand. These outcomes prioritized to enable international and sustainable deployment. Energy efficiency and coverage in IMT-Advanced are addressed through requirements for robust cell-edge performance. This is quantified via targets, with cell-edge metrics defined at the 5% point of the of normalized user throughput, promoting widespread accessibility. Support for pico and femto cells is integral, enabling deployments that overlay smaller, low-power nodes on macro cells to enhance coverage in dense or indoor areas while optimizing energy use and mitigating interference.

Approved IMT-Advanced Technologies

LTE-Advanced

LTE-Advanced represents the evolution of the Long-Term Evolution (LTE) standard developed by the 3rd Generation Partnership Project (), building directly on LTE Release 8 and enhancements in Release 9 to meet the requirements for International Mobile Telecommunications-Advanced (IMT-Advanced). Specified in 3GPP Release 10, which was frozen in March 2011, LTE-Advanced introduces advanced techniques to achieve higher performance while maintaining full with earlier LTE deployments, allowing seamless upgrades without disrupting existing networks. Central to LTE-Advanced's capabilities is (CA), which enables the combination of up to five component carriers—each with a bandwidth of 1.4 to 20 MHz—to support a total aggregated bandwidth of up to 100 MHz, thereby scaling the effective transmission bandwidth beyond the 20 MHz limit of basic LTE. This is complemented by support for 8x8 multiple-input multiple-output () in the downlink and 4x4 in the uplink, allowing for across multiple layers to boost throughput. Additionally, coordinated multipoint (CoMP) transmission and reception coordinates signals across multiple base stations to mitigate inter-cell interference, particularly at cell edges, enhancing overall coverage and in dense deployments. These features also include advanced receivers capable of interference cancellation and support for heterogeneous networks (HetNets), integrating macrocells with for improved capacity in varied environments. In terms of performance, LTE-Advanced achieves peak data rates of up to 3 Gbit/s in the downlink—using 8x8 over 100 MHz of aggregated bandwidth—and 1.5 Gbit/s in the uplink, significantly exceeding the IMT-Advanced minimum requirements of 1 Gbit/s downlink and 500 Mbit/s uplink. The standard's peak reaches 30 bit/s/Hz in the downlink and 15 bit/s/Hz in the uplink, surpassing the IMT-Advanced threshold of 15 bit/s/Hz for downlink peak efficiency, with CA contributing by enabling proportional scaling of total bandwidth as the sum of individual component carriers to deliver higher aggregate throughput without proportionally increasing complexity. LTE-Advanced is formally standardized in Technical Specification TS 36.300, which outlines the evolved universal terrestrial radio access () and E-UTRAN architecture, and was recognized by the (ITU) in Recommendation ITU-R M.2012 as one of the approved IMT-Advanced radio interface technologies.

WiMAX Release 2

WiMAX Release 2, formally known as IEEE 802.16m or WirelessMAN-Advanced, represents the evolution of the Mobile standard (IEEE 802.16e) to meet IMT-Advanced criteria. Specified in IEEE Std 802.16m-2011 and published in May 2011, it introduces enhancements including multi-carrier operation for bandwidth aggregation up to 100 MHz, support for advanced configurations up to 8 transmit antennas in the downlink and 8 receive antennas in the uplink at the base station (e.g., 8x4 ), and self-organizing networks (SON) for automated network configuration and optimization. The technology was submitted to the as a candidate for IMT-Advanced in and officially approved in 2012 following evaluation against defined performance benchmarks. While primarily designed for fixed and nomadic access in point-to-multipoint topologies, it accommodates high mobility scenarios up to 350 km/h with optimized and synchronization mechanisms. The standard emphasizes time division duplexing (TDD) as the primary mode, though frequency division duplexing (FDD) is also supported for flexibility in spectrum usage. Key technical advancements enable high-capacity , with target peak spectral efficiencies of 15 bits/s/Hz in the downlink (using 4x4 ) and 6.75 bits/s/Hz in the uplink (using 2x4 ), translating to peak data rates of approximately 1.5 Gbit/s downlink and 675 Mbit/s uplink over a 100 MHz channel after accounting for PHY overhead. The advanced air interface incorporates higher-order 256-QAM modulation for increased throughput in favorable channel conditions and multi-hop relay support to improve coverage in non-line-of-sight environments without dedicated backhaul. WiMAX Release 2 fulfills IMT-Advanced requirements through significantly enhanced MAC and PHY layers that boost , reduce latency, and enable advanced interference coordination via coordinated multipoint transmission. with IEEE 802.16e is ensured via dedicated legacy zones within the frame structure, allowing seamless integration in mixed deployments. In comparison to LTE-Advanced, it prioritizes flexible delivery in varied bands over integrated voice and data services in macro-cellular networks.

Predecessor Technologies

3G and Early 4G Systems

The third-generation () mobile systems, standardized under the International Mobile Telecommunications-2000 (IMT-2000) framework by the (ITU) in 2000, established the foundational architecture for global mobile broadband evolution. These systems primarily relied on (CDMA) technologies to support higher data rates than second-generation () networks, enabling services such as mobile internet access, video calling, and multimedia messaging with improved and global roaming capabilities. The IMT-2000 specifications defined a family of radio interfaces, including five primary terrestrial ones based on CDMA direct spread, multi-carrier CDMA, and time-division CDMA variants, which provided a baseline for subsequent enhancements toward IMT-Advanced () by emphasizing scalable bandwidth and quality-of-service (QoS) provisions. Key 3G implementations included the Universal Mobile Telecommunications System () using wideband CDMA (WCDMA) developed by the 3rd Generation Partnership Project (), and from the 3GPP2 partnership. /WCDMA operated in a 5 MHz bandwidth with a 3.84 Mcps chip rate, achieving peak downlink data rates of up to 1.92 Mbit/s and uplink rates of 960 kbit/s under frequency-division duplex (FDD) mode, while supporting hybrid circuit- and packet-switched domains for voice and data. Similarly, utilized multi-carrier CDMA in 1.25 MHz channels (scalable to 3X for 3.75 MHz), delivering peak rates around 2.4 Mbit/s in its 1X evolution data optimized (EV-DO) variant, which prioritized packet data for asymmetric high-speed downlink services. These CDMA-based systems served as the evolutionary baseline for IMT-Advanced by introducing packet-switched enhancements over 2G's predominantly circuit-switched designs, though none of the IMT-2000 radio interfaces fully met the ITU's IMT-Advanced criteria for , such as peak data rates exceeding 100 Mbit/s and all-IP architectures. Early precursors, often termed "pre-4G" or transitional technologies, built on foundations through enhancements like High-Speed Packet Access Plus (HSPA+) in 3GPP Releases 7 through 9, which evolved /WCDMA without fully adopting 4G air interfaces. HSPA+ incorporated multiple-input multiple-output () configurations (e.g., 2x2) and higher-order modulation schemes such as 64-quadrature (64-QAM), enabling downlink peak data rates of up to 21 Mbit/s in single-carrier mode and 42 Mbit/s with dual-carrier aggregation, alongside uplink rates reaching 11.5 Mbit/s via 16-QAM. These improvements shifted emphasis toward fully packet-switched data transport, reducing reliance on circuit-switched elements inherited from and paving the way for () in true systems like LTE, which offered better handling of multipath fading and higher in broadband scenarios. Although not officially designated by the ITU, HSPA+ was commonly classified as 3.5G or 3.9G to reflect its intermediate performance between IMT-2000 and IMT-Advanced requirements.

Specific Pre-4G Examples

Initial LTE, standardized by the in Release 8 in 2008, represented a significant advancement in capabilities using (OFDMA) for the downlink and single-carrier frequency-division multiple access (SC-FDMA) for the uplink. This system achieved a peak downlink data rate of 326 Mbit/s within a 20 MHz bandwidth, supporting enhanced and flexibility for allocation. Although widely marketed as technology by operators and vendors, the ITU classified initial LTE as meeting IMT-Enhanced criteria rather than the stricter IMT-Advanced requirements, due to limitations in peak rates and advanced features like . Mobile WiMAX, defined in the IEEE 802.16e standard ratified in 2005, introduced time-division duplexing (TDD) operation with support for to improve signal quality and coverage in mobile environments. It delivered peak data rates up to 30 Mbit/s in a 10 MHz channel, enabling access for portable devices but constrained by narrower bandwidth options compared to later evolutions. In 2007, the ITU approved Mobile WiMAX profiles as compliant with IMT-2000 specifications, positioning it as a 3G-equivalent rather than a full IMT-Advanced candidate. Other notable pre-4G examples include Ultra Mobile Broadband (UMB), an evolution of the family aimed at higher data rates through scalable , but development was canceled by in November 2008 in favor of LTE alignment. Flash-OFDM, developed by Flarion Technologies (later acquired by ), was trialed for wide-area coverage and demonstrated peak data rates around 5 Mbit/s in 1.25 MHz channels, emphasizing low latency for packet-switched data services. Similarly, iBurst, based on the IEEE 802.20 standard for wireless access, utilized techniques to support high mobility up to 250 km/h, providing downlink rates exceeding 1 Mbit/s in urban settings while prioritizing seamless handoffs. These technologies served as essential bridges from 3G systems to full IMT-Advanced standards by introducing key concepts like OFDMA and , yet they generally fell short in supporting aggregated bandwidths beyond 20 MHz and the gigabit-scale peak rates required for true performance.

Comparison and Evaluation

With Predecessor Technologies

IMT-Advanced represents a substantial leap in performance over its predecessor technologies, particularly systems under IMT-2000 and early implementations like LTE Release 8. While networks, such as and HSPA, typically delivered peak data rates around 14 Mbit/s in downlink, enabling basic mobile , IMT-Advanced targets up to 1 Gbit/s for low-mobility scenarios. Early LTE systems improved this to approximately 300 Mbit/s peak downlink but fell short of true capabilities for high-demand applications. These speed gains in IMT-Advanced facilitate genuine mobile , supporting seamless , services, and immersive without wired-like constraints. Spectral efficiency and latency further underscore the advancements, with IMT-Advanced achieving up to 15 bit/s/Hz in downlink peak efficiency compared to 2-3 bit/s/Hz in systems. User plane latency drops below 10 ms in IMT-Advanced under unloaded conditions, versus over 100 ms in networks. The following table summarizes key downlink (DL) and uplink (UL) performance metrics for comparison:
TechnologyPeak DL RatePeak UL RatePeak Spectral Efficiency (DL/UL, bit/s/Hz)User Plane Latency
(IMT-2000/HSPA)~14 Mbit/s~5.8 Mbit/s~2-3 / ~1100+ ms
Early 4G (LTE Rel. 8)~300 Mbit/s~75 Mbit/s~16 / ~3.75<10 ms
IMT-Advanced1 Gbit/s500 Mbit/s15 / 6.75<10 ms
These metrics highlight 5-10x throughput improvements and enhanced coverage in IMT-Advanced evaluations, as per ITU guidelines. Architecturally, IMT-Advanced adopts a fully all-IP packet-switched framework, departing from the hybrid circuit- and packet-switched designs of systems that separated voice and data handling. This unified approach streamlines network operations, reduces complexity, and bolsters support for seamless mobility across heterogeneous environments up to 350 km/h, alongside advanced QoS mechanisms for prioritized traffic like and video. Such shifts enable more efficient and better performance compared to the fragmented of predecessors.

With Successor Standards

IMT-Advanced systems, defined by requirements, targeted peak data rates of up to 1 Gbit/s for low-mobility scenarios to enable enhanced services such as high-speed data access and applications. In contrast, () specifications elevate this to a downlink peak of 20 Gbit/s and uplink of 10 Gbit/s under ideal conditions, representing a 20-fold increase in downlink capacity to support more demanding applications. Beyond raw speed, introduces ultra-reliable low-latency communications (URLLC) for mission-critical tasks like industrial automation and massive machine-type communications (mMTC) for IoT deployments, expanding beyond IMT-Advanced's primary emphasis on enhancements. Spectrum utilization also marks a significant , with IMT-Advanced supporting aggregated bandwidths up to 100 MHz through to achieve its performance goals. , however, leverages millimeter-wave (mmWave) bands with channel bandwidths up to 400 MHz, enabling higher throughput in dense environments. Additionally, the World Radiocommunication Conference (WRC-19) identified new for IMT in bands including 24.25-27.5 GHz, 37-43.5 GHz, 45.5-47 GHz, 47.2-48.2 GHz, and 66-71 GHz, extending up to approximately 100 GHz to accommodate future growth. Feature-wise, IMT-Advanced prioritized seamless enhanced with improved and mobility support. advances this through network slicing for customized virtual networks tailored to specific services, massive configurations exceeding 64x64 antennas for superior and , and AI-driven optimization for dynamic and . These enhancements address IMT-Advanced's limitations in handling diverse, latency-sensitive, and ultra-dense connectivity demands. The standard was formally approved by in February 2021 via Recommendation M.2150, building on IMT-Advanced as a transitional framework. LTE-Advanced Pro, introduced in 3GPP Release 13 and beyond, bridges the two by incorporating early 5G-like features such as enhanced and licensed-assisted access, facilitating smoother evolution without full infrastructure overhauls.

Deployment and Legacy

Global Adoption

LTE-Advanced emerged as the predominant IMT-Advanced technology following its standardization, with 88 operators achieving commercial deployment across 45 countries by mid-2015, while total LTE networks reached over 400 operators in more than 140 countries. This rapid expansion was driven by its compatibility with existing LTE infrastructure and support for enhanced data rates, positioning it as the preferred choice for evolution. By 2020, LTE networks, including LTE-Advanced enhancements, accounted for approximately 44.5% of global mobile connections, equivalent to about 3.8 billion subscriptions, reflecting substantial in both developed and emerging economies. Key deployments highlighted regional leadership, with North American operators such as Verizon and pioneering nationwide LTE-Advanced rollouts for high-speed mobile services, European providers like implementing for urban capacity boosts, and Asian giants including scaling massive networks to serve billions of users. In contrast, WiMAX Release 2 experienced limited global uptake, confined largely to access applications, such as trials by in the United States during the early , where it targeted underserved urban pockets before being overshadowed by LTE's ecosystem advantages. Its adoption peaked modestly in the within developing regions, where operators leveraged it for cost-effective rural in areas lacking , though overall deployments remained niche compared to LTE's scale. By 2025, LTE-Advanced and its evolutions continued to dominate, handling approximately 55% of global mobile data traffic amid the gradual rise of , underscoring its enduring role in supporting surging demand for video and IoT applications. Spectrum auctions in the , particularly for the 700 MHz band in the —exemplified by Germany's 2015 auction that assigned low-frequency licenses for broad coverage—played a pivotal role in accelerating these deployments by enabling efficient propagation for both urban and suburban networks. Adoption exhibited clear regional variations, with dense urban areas worldwide achieving near-universal LTE-Advanced coverage to facilitate high-bandwidth uses like streaming and connected devices, while rural zones faced slower rollout due to elevated infrastructure costs and lower population densities, resulting in persistent connectivity gaps in low- and middle-income countries.

Current Status as of 2025

As of November 2025, LTE-Advanced continues to serve as a foundational technology for global mobile connectivity, supporting billions of devices and enabling non-standalone (NSA) deployments that rely on its core infrastructure for control signaling and fallback coverage. Global LTE connections number approximately 4.9 billion, representing the majority of active cellular subscriptions outside of emerging standalone networks. This enduring relevance stems from its widespread deployment in both urban and rural areas, where it handles routine data traffic and ensures seamless with for enhanced user experiences. In contrast, WiMAX Release 2 networks have largely faded from prominence, with only a small number of active deployments remaining worldwide, primarily in niche access scenarios. Most former WiMAX spectrum has been refarmed for LTE and use, including complete shutdowns in key markets like the by 2020, reflecting the technology's inability to compete with more efficient alternatives. By 2025, WiMAX's global market footprint is limited to specialized applications, with deployments in a handful of regions, a sharp decline from its peak in the early 2010s. IMT-Advanced faces mounting challenges amid the spectrum reallocation pressures driven by 5G expansion, as regulators worldwide prioritize mid-band frequencies (e.g., 3.5 GHz) for next-generation services, squeezing available bandwidth for legacy 4G operations. As of 2025, operators continue refarming WiMAX spectrum for LTE and 5G, with LTE-Advanced Pro enabling enhanced IoT and vehicle-to-everything (V2X) support through features like improved carrier aggregation and low-latency sidelink capabilities. The ITU-R Recommendation M.2012, defining IMT-Advanced specifications, underwent its most recent major revision in December 2023, with no further updates anticipated as focus shifts to and beyond. Consequently, IMT-Advanced accounts for approximately 55% of global mobile data traffic in 2025, even as achieves over 50% population coverage in advanced economies like and parts of . This traffic share underscores LTE-Advanced's transitional role, bridging the gap until full standalone adoption, projected to dominate by the early 2030s.

References

  1. https://www.itu.int/en/ITU-R/study-groups/rsg5/rwp5d/imt-adv/Pages/default.aspx
  2. https://www.itu.int/dms_pub/itu-r/opb/rep/r-rep-m.2134-2008-pdf-e.pdf
  3. https://www.itu.int/en/ITU-R/study-groups/rsg5/rwp5d/imt-adv/Pages/submission-eval.aspx
  4. https://www.3gpp.org/news-events/3gpp-news/itu-r-confers-imt-advanced-4g-status-to-3gpp-lte
  5. https://www.itu.int/en/ITU-R/Documents/FAQ-IMT-2024.pdf
  6. https://www.itu.int/rec/R-REC-M.2012/en
  7. https://www.gsmaintelligence.com/research/4g-technologies-do-not-officially-exist-yet
  8. https://www.fierce-network.com/tech/itu-declares-lte-advanced-802-16m-4g-standards
  9. https://www.itu.int/net/pressoffice/press_releases/2012/04.aspx
  10. https://www.itu.int/pub/R-REP-M.2134
  11. https://www.itu.int/dms_pubdb/itu-r/opb/rep/R-REP-M.2135-2009-PDF-E.pdf
  12. https://www.itu.int/md/R00-SG05-CIR-0002/en
  13. https://grouper.ieee.org/groups/802/802_tutorials/2011-03/80216-11_0005.pdf
  14. https://standards.ieee.org/ieee/802.16m/4017/
  15. https://www.itu.int/net/pressoffice/press_releases/2012/02.aspx
  16. https://www.itu.int/dms_pub/itu-r/oth/0c/0a/r0c0a00000c0014pdfe.pdf
  17. https://www.itu.int/ITU-D/tech/MobileCommunications/Spectrum-IMT.pdf
  18. https://www.itu.int/dms_pub/itu-r/oth/0c/0a/R0C0A00000A0011PDFE.pdf
  19. https://www.cra.gov.qa/-/media/System/3/5/E/E/35EE137E0A0E56F3B233F2D9CDA0943B/Qatar-Major-WRC-15-Outcomes-English.ashx
  20. https://www.itu.int/dms_pub/itu-r/opb/rep/r-rep-m.2292-2014-pdf-e.pdf
  21. https://www.3gpp.org/images/PDF/lte_advanced_SAI_paper.pdf
  22. https://www.3gpp.org/ftp/information/presentations/presentations_2009/2009_09_R9_LTE_Advanced.pdf
  23. https://www.3gpp.org/about-us
  24. https://www.3gpp.org/img/pdf/lte_advanced_v2.pdf
  25. https://www.etsi.org/deliver/etsi_tr/136900_136999/136912/10.00.00_60/tr_136912v100000p.pdf
  26. https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/LTE_Advanced_Evolution_for_Longhaul_10312013.pdf
  27. https://www.etsi.org/deliver/etsi_ts/136300_136399/136300/11.03.00_60/ts_136300v110300p.pdf
  28. https://grouper.ieee.org/groups/802/16/tgm/docs/80216m-08_003r6.pdf
  29. https://grouper.ieee.org/groups/802/16/tgm/docs/80216m-09_0034.pdf
  30. https://grouper.ieee.org/groups/802/16/tgm/docs/80216m-07_002r7.pdf
  31. https://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.1457-0-200005-S!!PDF-E.pdf
  32. https://www.3gpp2.org/ftp/Specs/archive/0244/0244-a_v2.0_040913.pdf
  33. https://www.itu.int/en/ITU-R/study-groups/rsg5/rwp5d/imt-2000/Pages/default.aspx
  34. https://www.3g4g.co.uk/Hspa/HSPAE_WP_0905_RandS.pdf
  35. https://www.qualcomm.com/media/documents/files/hspa-is-here-what-s-next.pdf
  36. https://rysavy.com/wp-content/uploads/2017/08/2010_09_hspa_lte_advanced.pdf
  37. https://www.trai.gov.in/sites/default/files/2024-11/IMT-Adv11.pdf
  38. https://www.telecomhall.net/t/3gpp-and-itu-tutorial/6040
  39. https://www.scirp.org/journal/paperinformation?paperid=40158
  40. https://openknowledge.worldbank.org/bitstreams/2589c1ab-43cb-5b97-b0e5-99ffda89b846/download
  41. https://arstechnica.com/gadgets/2008/11/qualcomm-cancels-ultramobile-broadband/
  42. https://www.qualcomm.com/news/releases/2006/12/qualcomm-successfully-demonstrates-mobile-broadband-using-flash-ofdm
  43. https://www.itu.int/ITU-D/tech/events/2007/MoscowNovember2007/Presentations/Presentation_Moscow_KYamaguchi_Part1.pdf
  44. https://www.itu.int/en/ITU-R/Documents/ITU-R-FAQ-IMT_2021.pdf
  45. https://www.3g4g.co.uk/LteA/LteA_Pres_0909_3GAmericas.pdf
  46. https://www.sciencedirect.com/topics/engineering/peak-data-rate
  47. https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/Research_Latency_in_HSPA_Data_Networks.v2.20110210.pdf
  48. https://www.etsi.org/deliver/etsi_tr/125900_125999/125999/07.01.00_60/tr_125999v070100p.pdf
  49. https://www.eurecom.fr/publication/3694/download/cm-publi-3694.pdf
  50. https://www.etsi.org/deliver/etsi_tr/136900_136999/136912/09.00.00_60/tr_136912v090000p.pdf
  51. https://www.cse.wustl.edu/~jain/cse574-08/ftp/imta/index.html
  52. https://www.itu.int/dms_pub/itu-r/opb/rep/R-REP-M.2412-2017-PDF-E.pdf
  53. https://www.itu.int/hub/2020/01/wrc-19-identifies-additional-frequency-bands-for-5g/
  54. https://www.3gpp.org/technologies/slice-management
  55. https://s41721.pcdn.co/wp-content/uploads/2021/06/En-AI-and-ML-for-5G.pdf
  56. https://www.3gpp.org/news-events/3gpp-news/lte-advanced-pro
  57. https://www.telit.com/resources/whitepapers/the-role-of-4g-lte-advanced-pro-in-the-evolution-toward-5g/
  58. https://carrier.huawei.com/en/industry-perspective/wireless-network/lte/bestlte
  59. https://gsacom.com/paper/lte-to-be-leading-mobile-systems-tech-by-2020-with-44-5-share/
  60. https://www.globalgrowthinsights.com/blog/lte-base-station-system-companies-980
  61. https://www.telecoms.com/digital-ecosystem/new-clearwire-a-boost-for-wimax-but-faces-challenges
  62. https://www.mordorintelligence.com/industry-reports/wimax-market
  63. https://www.ericsson.com/en/reports-and-papers/mobility-report/dataforecasts/mobile-traffic-forecast
  64. https://www.sciencedirect.com/science/article/abs/pii/S0308596117300289
  65. https://www.statista.com/statistics/264067/global-mobile-internet-use-rural-urban-gap-low-middle-income-countries-region/
  66. https://about.att.com/blogs/2025/5g-standalone-nationwide.html
  67. https://www.techtarget.com/searchnetworking/feature/5G-NSA-vs-SA-How-does-each-deployment-mode-differ
  68. https://www.ericsson.com/en/reports-and-papers/mobility-report/key-figures
  69. https://gsacom.com/paper/lte-to-5g-evolution-may-2025/
  70. https://www.gminsights.com/industry-analysis/wimax-market
  71. https://www.ericsson.com/en/reports-and-papers/mobility-report
  72. https://www.qualcomm.com/research/5g/lte-advanced-pro
  73. https://www.teldat.com/blog/lte-advanced-pro-lays-the-basis-for-5g/
  74. https://www.5gamericas.org/the-state-of-5g-growth-challenges-and-opportunities-in-2025/
  75. https://www.iot-now.com/2025/05/16/151601-5g-networks-to-carry-80-of-global-mobile-traffic-by-2030/
Add your contribution
Related Hubs
Contribute something
User Avatar
No comments yet.