Hubbry Logo
Project V150Project V150Main
Open search
Project V150
Community hub
Project V150
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Project V150
Project V150
Project V150
View on Wikipedia
from Wikipedia

TGV 4402 (operation V150) reaching 574 km/h on 3 April 2007 near Le Chemin, France.

Operation V150, where 150 refers to a target speed in metres per second, was a series of high-speed trials carried out on the LGV Est. The V150 was a specially configured TGV high-speed train (weighing only 265 tonnes (292 tons)) notable for breaking the world railway speed record on 3 April 2007. The train was built in France and reached a speed of 574.8 kilometres per hour (357.2 mph; 159.7 m/s) on an unopened section of the LGV Est between Strasbourg and Paris, in France[1] topping the previous record of 515.3 kilometres per hour (320.2 mph; 143.1 m/s) set in 1990.[2]

Record of 2007

[edit]

Operation V150 trials were carried out on the LGV Est prior to its June 2007 opening. The trials were conducted jointly by SNCF, TGV builder Alstom, and LGV Est owner Réseau Ferré de France between 15 January 2007 and 15 April 2007. Following a series of increasingly high-speed runs, the official speed record attempt took place on 3 April 2007.[3][4] The top speed of 574.8 km/h (159.7 m/s, 357.2 mph) was reached at kilometre point 193 near the village of Le Chemin, between the Meuse and Champagne-Ardenne TGV stations, where the most favorable profile exists.

Part of the record-breaking V150 unit being sailed in triumph down the Seine for display at the foot of the Eiffel Tower

The 515.3 km/h (320.2 mph) speed record of 1990 was unofficially broken multiple times during the test campaign that preceded and followed the certified record attempt, the first time on 13 February 2007 with a speed of 554.3 kilometres per hour (344.4 mph), and the last time on 15 April 2007 with a speed of 542.9 kilometres per hour (337.3 mph).

V150 record train

[edit]
Wikimedia Commons has media related to TGV trainset 4402.

The train used for the speed record was code named V150, and comprised three modified Duplex cars, fitted with two powered bogies similar to the AGV prototype, marshalled between a pair of TGV power cars from POS trainset 4402. The train had four more powered axles than trainset 325 used in the 1990 speed record, and had a maximum power output of 19.6 MW (26,300 hp) instead of the 9.3 MW (12,500 hp) on a standard TGV POS. This unusual composition was used to obtain high speed test data on disparate technical elements including the new asynchronous traction motors on the POS power cars, the lightweight synchronous permanent magnet traction motors on the AGV bogies, the actively controlled pantograph, and the Duplex bi-level configuration which had never been used in very high speed trials.

Aerodynamic improvements, similar to the 1990 record train, were refined in a wind tunnel and provided a 15% reduction in drag from the standard configuration. These improvements included a front air dam, roof fairings over the pantograph openings, membranes to cover the space between the cars, and a flush-mounted windshield. Over 600 sensors were fitted on various parts of both the engines and the cars. The train set ran with larger wheels with a diameter of 1,092 mm (43.0 in) instead of 920 mm (36.2 in), to limit the rotational speed of the powertrain.[5][6]

Part of TGV trainset 4402 displayed near the Eiffel Tower after the record

Test track

[edit]

The record runs took place on a 140-kilometre (87 mi) section of track 1 on the LGV Est, usually heading west, between kilometre posts 264 (town of Prény) and 120 (near the Champagne-Ardenne TGV station). This section of the LGV was chosen for its vertical profile and gentle curves, with favorable downhill segments leading to the highest speeds between kilometre posts 195 and 191, near the border between the Meuse and Marne departments. The track superelevation was increased to support higher speeds. Catenary voltage was increased to 31 kV from the standard 25 kV. The mechanical tension in the wire was increased to 40 kN from the standard 25 kN. The speed of the transverse wave induced in the overhead wire by the train's pantograph was thus increased to 610 km/h (380 mph), providing a margin of safety beyond the train's maximum speed. Several measurement stations were installed along the test tracks to monitor stresses in the track and ballast, noise, aerodynamic effects, and catenary dynamics. Between kilometre posts 223 and 167, where speeds exceeded 500 km/h (311 mph), the track was under close surveillance.

Record runs

[edit]

Between 15 January 2007 and 15 April 2007, the V150 train travelled at 500 kilometres per hour (311 mph) and above for a cumulative distance of 728 kilometres (452 mi). For each high speed run, another TGV performed a sweep of the track before the V150 train was cleared to start. This sweep was performed at a sustained 380 km/h (236 mph)—the peak speed reached in the record of 1981—by TGV POS trainset 4404 in a standard eight-car configuration. The acceleration of the V150 train took place over a distance of 70 kilometres (43 mi). During certain runs, including the official record run, the V150 train was chased by an Aérospatiale Corvette airplane to provide data relay and uplink of live television images.

See also

[edit]
Wikinews has related news:

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Project V150

View on Grokipedia
from Grokipedia
Project V150 was a collaborative undertaken by , the French National Railway Company (), and Réseau Ferré de France (RFF) to develop and test a modified high-speed train capable of achieving unprecedented speeds on conventional rail infrastructure. On April 3, 2007, the V150 trainset shattered the previous for wheeled rail vehicles by reaching a peak speed of 574.8 km/h (357.2 mph) during a test run on the high-speed line in eastern . The V150 trainset was a specially configured prototype based on the TGV (Train à Grande Vitesse) family, weighing only 265 tonnes to optimize acceleration and speed. It consisted of two TGV POS power cars, three TGV Duplex double-decker coaches for reduced weight and aerodynamic efficiency, and two AGV motorized bogies incorporating advanced low-resistance technology from Alstom's next-generation train design. Key modifications included larger wheels to cover more distance per rotation, an increased overhead electrical voltage from 25,000 to 31,000 volts, and a total power output of 19.6 MW (approximately 25,000 horsepower), enabling the train to accelerate to its record speed in about 16 minutes over a specially prepared section of the LGV Est line near kilometer point 191. The project, which involved over 300 engineers and technicians, conducted more than 40 trial runs exceeding 450 km/h, accumulating over 200 test hours and 3,200 kilometers since January 2007, aimed not only at breaking the 1990 TGV record of 515.3 km/h but also at advancing in rail safety, , and power systems for future commercial high-speed lines. This achievement underscored the reliability of French rail and supported the launch of the Paris-Strasbourg service later that year, reducing travel time from four hours to two hours and 20 minutes. Although the V150 did not surpass the 2003 record of 581 km/h, it remains the fastest speed attained by a wheeled, steel-on-steel and demonstrated the potential for very without . As of 2025, this remains the highest speed achieved by a conventional wheeled, steel-wheel-on-steel-rail .

Background

Historical Context

The (Train à Grande Vitesse) program originated with the inauguration of the Paris-Lyon high-speed line on September 27, 1981, by President François Mitterrand, marking the debut of dedicated high-speed rail infrastructure in . This line, known as the , enabled operational speeds of up to 260 km/h, significantly reducing travel time between the two cities from around five hours to just over two, and boosting passenger traffic by 70% over the following decade. Developed through a collaborative effort between the state-owned (SNCF) and engineering firms, the represented a strategic in modernizing France's rail system, emphasizing safety, efficiency, and economic connectivity. During pre-service testing on the in February 1981, a prototype achieved a world speed record of 380 km/h near Tonnerre, surpassing previous benchmarks and validating the technology's potential for wheeled . This record was extended dramatically in 1990 when a modified TGV Atlantique trainset reached 515.3 km/h on the newly opened LGV Atlantique line south of Vendôme, demonstrating advancements in power systems, , and track stability. These milestones were part of a series of iterative test programs coordinated by and , aimed at pushing the limits of conventional rail engineering to enhance technological leadership and national prestige. By the early 2000s, the TGV's evolution occurred amid intensifying European competition in , with Germany's InterCityExpress (), which had set a test speed record of 406.9 km/h in 1988, achieving operational speeds up to 300 km/h, while Japan's network expanded with trains capable of 300 km/h and experimental prototypes surpassing 500 km/h. SNCF and Alstom's record-breaking efforts underscored France's commitment to maintaining dominance in the sector, fostering innovations that influenced global standards. The progressive expansion of the LGV network, from the initial 414 km Sud-Est line to additional routes like Atlantique, served as a crucial precursor, providing dedicated tracks optimized for high velocities.

Project Objectives

Project V150 was initiated in late 2006 by Réseau Ferré de France (RFF), , and to break the world rail speed record for conventional wheeled trains, targeting a speed of 150 meters per second (540 km/h) to surpass the 1990 record of 515.3 km/h. The name "V150" derives from this objective, symbolizing "vitesse" (speed) at 150 m/s. Building on prior achievements, such as the 1990 record, the project sought to push the boundaries of existing technology without radical innovations. The initiative served to showcase French rail engineering prowess ahead of the LGV Est line's opening in June 2007, which would connect to . It aimed to advocate for the expansion of networks globally, highlighting the reliability and efficiency of systems. By demonstrating speeds exceeding 550 km/h, the project underscored France's leadership in sustainable, high-capacity transport solutions. Technically, Project V150 focused on testing the limits of steel-wheel-on-steel-rail , , and power systems at extreme velocities to evaluate their potential for future commercial high-speed operations beyond current limits. The effort spanned from late 2006 to April 2007, culminating in record attempts on the , and involved over 300 engineers and technicians overall, with the development phase contributing approximately 100,000 man-hours.

Train Development

Design and Assembly

The V150 trainset was assembled by repurposing components from existing models to align with the project's objective of rapidly demonstrating advanced capabilities using proven technology. Construction involved collaboration across several facilities in over a 14-month period, engaging approximately 60 specialists. The two TGV POS power cars, originally intended for East European high-speed services, were prepared at the workshops. The three double-decker trailers—one first-class coach (R1), one laboratory coach (R8), and one incorporating AGV prototype technology (R4)—were modified at Reichshoffen. Additional contributions included bogies from , motors from Ornans, traction drives from , and onboard electronics from . Final assembly and integration occurred at the site, with handling adaptations at Bischheim and completion at Aytré. This compact configuration totaled five cars, with the power cars flanking the trailers, resulting in an overall length of 106 and a design weighing 268 tonnes to facilitate higher speeds. The trainset delivered 19.6 MW of power—equivalent to over 25,000 horsepower—from its four . For aerodynamic optimization, it featured a streamlined exterior with a distinctive chrome-accented "jet" motif on a dark background , symbolizing speed and technological prowess. Modifications were finalized in December 2006, after which the completed trainset was transferred to SNCF's Technicentre Est at on 19 December for initial preparations. Dynamic assembly tests and validation runs began on 15 January 2007, marking the start of operational trials.

Key Modifications

The V150 train was assembled from standard TGV POS power cars and Duplex trailers, with targeted upgrades to enhance performance for speeds exceeding 500 km/h. To improve stability and reduce wear on components at high velocities, the wheel was enlarged from 920 mm to 1,092 mm, allowing greater distance coverage per rotation and lowering the rotational demands on the . This modification helped maintain mechanical integrity during sustained high-speed operations. The power system was significantly enhanced for greater output and reliability, achieving a total of 19.6 MW through upgraded asynchronous motors in the POS power cars rated at 1,950 kW each, supplemented by permanent magnet synchronous motors on the AGV bogies at 1,000 kW each. Cooling systems were modified with onboard temperature sensors for real-time monitoring, while traction control was refined to optimize power delivery and prevent slippage under extreme . These changes represented a 56% increase in motor power over standard configurations, enabling the train to reach peak speeds without overheating. Aerodynamic refinements focused on minimizing air resistance, which accounts for approximately 95% of total drag at high speeds, through a streamlined , added underbody panels, and a redesigned . Rubber guards between cars and optimized roofing further reduced , resulting in a 15% improvement in the compared to the standard setup. testing validated these alterations, ensuring efficient airflow management. Safety enhancements included reinforced AGV bogies on the intermediate cars, which demonstrated superior dynamic stability and lower track forces during testing. The braking system combined regenerative and disc mechanisms, with and capacity monitored via an array of 600 onboard sensors to handle deceleration from record speeds. Comprehensive provided real-time data on parameters such as contact, wheel-rail interaction, and structural integrity, allowing immediate adjustments to mitigate risks.

Track Preparation

Infrastructure Details

The , or Ligne à Grande Vitesse Est Européenne, is a 300 km line connecting to , constructed at a total cost of approximately €4 billion and opened to service in June 2007. Project V150 utilized a specially prepared 12 km section of the line near kilometer point 191, in the area of Le Chemin between the TGV station and points toward , benefiting from the line's straight alignment optimized for high-speed tests during its pre-opening phase. This segment features a minimal of 2‰ and straight alignment optimized for stability at elevated speeds, with the overall infrastructure designed for commercial operations at 320 km/h but capable of supporting tests up to 600 km/h. The track employs ballasted track construction with concrete sleepers to enhance stability and reduce maintenance needs, particularly suited for high-speed conditions. Rails are of the UIC 60 standard, weighing 60 kg per meter, which provides durability for heavy loads and while conforming to European high-speed specifications. is via a 25 kV AC overhead system, standard for French LGVs, ensuring efficient power delivery across the twin-track, standard-gauge (1,435 mm) alignment.

High-Speed Adaptations

To enable speeds exceeding 500 km/h on the V150 test section of the line, the track underwent specialized preparations to minimize vibrations and ensure stability. The standard ballasted track with concrete ties was modified by blasting the to remove loose , followed by precise alignment of the rails to within 1 mm tolerances using SNCF's track research equipment. The rails were ground smooth through polishing and spot realignments to further reduce aerodynamic and vibrational disturbances. Additionally, curve transitions were adjusted for smoother , cant was increased to a maximum of 130 mm to avoid , and specially profiled was employed to prevent flight during high-speed passes. Switch points were manually locked in the straight position using swingnose crossings to eliminate any irregularities. The overhead system received significant upgrades to maintain reliable contact under extreme aerodynamic loads. The contact wire, constructed from a highly pure copper-silver for enhanced conductivity and durability, was reinforced and subjected to increased mechanical tension of 40 kN—up from the standard 25 kN—to counteract wave propagation and ensure consistent power delivery. Tensioning systems were adjusted accordingly, and the supply voltage was elevated to 31.7 kV, supported by additional banks to manage reactive power and prevent voltage drops at peak speeds. These modifications allowed the to remain in stable contact without arcing or dewirement. Signaling and safety protocols were adapted from the LGV Est's baseline TVM 430 cab-signaling system, which provides continuous track-to-train transmission for speed supervision. For the V150 attempts, the system incorporated manual override functions to allow driver control during experimental runs beyond operational limits, while retaining automatic braking curves for . Emergency stop mechanisms were positioned along the route, complemented by monitoring stations at both ends of the test section equipped with real-time . Strain gauges were installed at critical points, such as expansion joints and masts, to track displacements and vibrations, enabling immediate intervention if thresholds were exceeded. Environmental controls focused on mitigating external factors that could compromise performance. The track was heated to approximately 40°C to evaporate any formation and ensure optimal wheel-rail , particularly during early morning tests. Wind barriers were strategically installed along exposed sections to shield against crosswinds that might induce instability at ultra-high velocities. These measures, combined with the LGV Est's foundational , created optimal conditions for the record runs.

Record Attempts

Initial Test Runs

The initial test runs for Project V150 began on the high-speed line on 15 January 2007, starting with lower-speed validations around 300 km/h to ensure system stability before escalating to higher velocities. These preliminary phases focused on integrating the modified trainset with the track infrastructure, incorporating adaptations such as reinforced power cars and optimized systems to support extreme speeds. Testing progressed rapidly through 2007, with the V150 achieving speeds above 500 km/h in multiple runs; for instance, it reached 541.1 km/h and 554.2 km/h on 13 , followed by 502.2 km/h on 18 and a phase maximum of 559.4 km/h on 20 . By the end of the first testing phase on 28 , the train had completed 11 high-speed passes, accumulating 313.35 km above 500 km/h while engineers fine-tuned performance parameters. March runs continued this buildup, contributing to overall data collection across 40 tests exceeding 450 km/h. Key challenges emerged during these sessions, notably arcing at speeds over 500 km/h, observed as early as 12 February, which risked power disruptions and required real-time adjustments to the contact strip and tensioning to maintain reliable current collection. Additional issues, such as guard detachments generating , were addressed through immediate maintenance halts and component reinforcements. By mid-April 2007, the cumulative distance at speeds exceeding 500 km/h reached 728 km, alongside a total testing portfolio of over 3,200 km and 200 hours, yielding critical insights into , , and electrical integrity. The effort was overseen by a joint team from , , and RFF, led by project chief Daniel Beylot of , with key contributions from 's François Lacôte and RFF's Alain Cuccaroni, supported by more than 40 technicians. Onboard and trackside monitoring relied on approximately 600 sensors distributed across the trainset, capturing data on 150 safety metrics alone, including dynamics and wheel-rail interactions, to inform iterative improvements.

Peak Achievement

The peak achievement of Project V150 was realized during a test run towards on April 3, 2007, at 13:13 (1:13 p.m.), near kilometer point 191 on the high-speed line in eastern , over the specially prepared track section. This run marked the project's climax, with the modified trainset accelerating under optimal conditions to establish a speed record for steel-wheel-on-rail technology. The track temperature stood at 30°C, accompanied by light wind, allowing the train to operate at 80% of its maximum power output while maintaining stability and safety margins. During the run, the V150 reached a peak speed of 574.8 km/h, which also served as the average speed over a 1 km calibrated section, as precisely measured by and GPS instrumentation integrated into the train's onboard systems. These measurements captured the instantaneous maximum and sectional average, confirming the train's performance exceeded prior benchmarks without compromising structural integrity. Post-peak, the train successfully decelerated to 500 km/h, demonstrating controlled braking capabilities essential for high-speed validation. This record remains the highest speed achieved by a non-maglev as of 2025. The results were homologated by independent legal witnesses on board, ensuring compliance with international protocols for rail speed records and validating the data against global standards. This verification process involved independent analysis of from over 600 sensors, underscoring the run's legitimacy and the collaborative expertise of , , and Réseau Ferré de France.

Legacy

Technological Impact

Project V150 provided critical data on wheel-rail interactions at speeds exceeding 500 km/h, utilizing over 600 sensors to analyze dynamic stability and validate predictive models for high-speed operations. These insights, gathered during more than 200 hours of testing and 40 runs above 450 km/h, enhanced understanding of contact forces and wear patterns under extreme conditions. Aerodynamic refinements, tested in wind tunnels and on-track, reduced drag compared to standard configurations, informing optimized nose shapes and underbody designs for minimal air resistance. Power efficiency evaluations revealed the challenges of sustaining propulsion at peak velocities, with the trainset achieving 19.6 MW output through dual power cars and advanced bogies. These findings directly contributed to improvements in subsequent TGV designs, particularly the , by incorporating lighter materials and enhanced power-to-weight ratios derived from V150's hybrid configuration of POS power cars and Duplex coaches. In commercial applications, the project informed the deployment of trainsets on the line, enabling routine operations at 320 km/h with improved across European power systems. Techniques for and vibration reduction, validated through on-board acoustic measurements during high-speed runs, were applied to mitigate environmental impacts in operational high-speed networks. The project strengthened the longstanding partnership between and , involving over 100 engineers and technicians in a 14-month effort that integrated expertise from Réseau Ferré de France (RFF). This collaboration not only advanced French rail but also positioned the partners as key exporters of high-speed , influencing international projects by demonstrating scalable innovations in and performance. However, V150 exposed significant limitations, including peak energy consumption of nearly 20 MW, which highlighted the impracticality of such demands for routine services without major infrastructure upgrades. The high costs associated with specialized modifications and extensive testing further underscored barriers to achieving sustained speeds above 500 km/h in commercial contexts.

Record Comparisons

The Project V150's achievement of 574.8 km/h on , 2007, established the enduring world for conventional wheeled , a mark that remains unbroken as of 2025. This record specifically applies to wheel-on-rail systems using traditional adhesion, excluding magnetically levitated () trains, which operate on non-conventional principles; for instance, Japan's JR- L0 series reached 603 km/h during a 2015 test on the Yamanashi Test Line. The distinction underscores V150's status in the category of powered rail vehicles with on steel rails, where no subsequent attempt has surpassed this under certified conditions. Prior to 2007, V150 surpassed the previous absolute wheeled record of 515.3 km/h, set by a modified Atlantique on May 18, , during tests on the LGV Atlantique line between Courtalain and Tours in . In operational contexts, it also eclipsed benchmarks like those of Germany's trains, which entered revenue service in 2002 with maximum speeds exceeding 300 km/h on lines such as the Köln–Rhein/Main high-speed route. These pre-2007 milestones highlighted progressive advancements in conventional rail, but V150's run represented a 11.4% increase over the benchmark, achieved through targeted modifications on the européenne. Since 2007, no verified wheeled rail speed has exceeded V150's, despite global efforts in development. For example, a CRH380A reached 486.1 km/h during dynamic tests on December 3, 2010, on a segment of China's Beijing– , marking a national achievement but falling short of international certification for an absolute . This and similar post-2007 trials, including recent Chinese prototypes like the CR450 achieving 450 km/h in pre-service evaluations in 2025, emphasize operational rather than absolute extremes. In , speeds remain conservatively lower to ensure safety and efficiency; the network, for instance, operates at a maximum of 320 km/h on dedicated lines like the . This contrast between absolute records and commercial viability illustrates V150's role as a pinnacle of experimental rail .

References

  1. https://www.alstom.com/press-releases-news/2007/4/alstom-rff-and-sncf-set-a-new-world-rail-speed-record-of-574kmh
  2. https://www.nytimes.com/2007/04/04/business/worldbusiness/04train.html
  3. https://www.aljazeera.com/news/2007/4/7/tgv-breaks-rail-speed-record
  4. https://www.groupe-sncf.com/en/group/history-archives/tgv-story
  5. https://www.railway-technology.com/projects/frenchtgv/
  6. https://www.alstom.com/press-releases-news/2012/4/5th-anniversary-of-the-alstom-world-rail-speed-record
  7. https://www.hsl-canada.net/en/worldwide.php
  8. https://www.alstom.com/press-releases-news/2007/3/alstom-sncf-and-rff-present-the-train-that-will-take-on-the-world-speed-record
  9. https://feed.ne.cision.com/Commands/File.aspx?id=628303
  10. https://electric-rly-society.org.uk/the-history-of-the-french-high-speed-rail-network-and-tgv/
  11. https://mappingignorance.org/2020/01/22/the-limits-of-high-speed-rail/
  12. https://www.railway-technology.com/projects/lgv_est/
  13. https://ec.europa.eu/ten/transport/priority_projects_minisite/PP04EN.pdf
  14. https://www.railwaygazette.com/in-depth/v150-5748-km/h-eclipses-the-1990-world-record/25027.article
  15. https://rails.arcelormittal.com/profiles/transport-rails/european-standards/rail-uic60-60e1/
  16. http://www.railfaneurope.net/tgv/rec-track.html
  17. https://cgvf.fr/wp-content/uploads/2023/09/2022_04_03_V150_15-ans_AJ.pdf
  18. https://www.alstom.com/press-releases-news/2007/4/574-8-km-h-new-world-rail-speed-record-set-at-13h13-on-3-April-2007-20070403
  19. http://actgv.fr/wp-content/uploads/2015/03/4-records-TGV-2015-03-18.pdf
  20. https://www.alstom.com/sites/alstom.com/files/2018/07/08/Global/Group/Resources/Documents/Investors%20document/Regulated%20Information/030407%20PR_Speed%20record_ENG.pdf
  21. https://www.cnn.com/travel/article/worlds-fastest-trains-cmd
  22. https://rollingstockworld.com/passenger-cars/the-world-of-high-speed-railways-and-trains-history-and-trends/
  23. https://www.cnn.com/2015/04/21/asia/japan-maglev-train-world-record
  24. https://www.reuters.com/article/world/train-breaks-speed-record-in-france-idUSL03641035/
  25. http://www.railfaneurope.net/tgv/rec-intro.html
  26. https://www.railway-technology.com/features/feature-the-10-fastest-high-speed-trains-in-europe/
  27. https://www.railwaygazette.com/passenger/china-hits-486-km/h-in-high-speed-trials/35527.article
  28. https://m.economictimes.com/news/international/[us](/page/United_States)/china-unveils-worlds-fastest-train-breaks-281-mph-speed--in-pre-service-trials-commercial-service-set-for-2026/articleshow/124800934.cms
  29. https://www.cnn.com/2025/03/18/travel/france-new-tgv-design-inoui-intl-scli
  30. https://ledicoferroviaire.mediarail.be/tgv-france-sncf-en/
Add your contribution
Related Hubs
User Avatar
No comments yet.