Hubbry Logo
Ecma InternationalEcma InternationalMain
Open search
Ecma International
Community hub
Ecma International
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Ecma International
Ecma International
Ecma International
View on Wikipedia
from Wikipedia

Ecma International (/ˈɛkmə/) is a nonprofit standards organization for information and communication systems.[1] It acquired its current name in 1994, when the European Computer Manufacturers Association (ECMA) changed its name to reflect the organization's global reach and activities. As a consequence, the name is no longer considered an acronym and no longer uses full capitalization.

Key Information

The organization was founded in 1961 to standardize computer systems in Europe. Membership is open to large and small companies worldwide that produce, market, or develop computer or communication systems, and have interest and experience in the areas addressed by the group's technical bodies. It is located in Geneva.

Aims

[edit]

Ecma aims to develop standards and technical reports to facilitate and standardize the use of information communication technology and consumer electronics; encourage the correct use of standards by influencing the environment in which they are applied; and publish these standards and reports in electronic and printed form. Ecma publications, including standards, can be freely copied by all interested parties without copyright restrictions. The development of standards and technical reports is done in co-operation with the appropriate national, European, and international organizations.

Unlike national standardization bodies, Ecma is a membership-based organization. It takes pride in the resulting "business-like" approach to standards, claimed to lead to better standards in less time, thanks to a less bureaucratic process focused on achieving results by consensus.[citation needed]

Ecma has actively contributed to worldwide standardization in information technology and telecommunications. More than 400 Ecma Standards[2] and 100 Technical Reports[3] have been published, more than 2⁄3 of which have also been adopted as international standards and/or technical reports.

The member list of Ecma International is available on its website.[4] Its members include IT companies, IT trade associations, universities, foundations and public institutions.

Standards

[edit]
Main article: List of Ecma standards

Ecma International is responsible for several standards, including:

Java programming language

[edit]

Although Sun Microsystems submitted its Java programming language to Ecma, Sun subsequently withdrew the submission. Thus, Ecma is not responsible for the standardization of Java.[22]

Office Open XML formats

[edit]

Ecma is involved in the standardization of the Office Open XML format based on the XML office document formats by Microsoft. The Ecma Office Open XML maintenance process is performed by technical committee 45 (TC45).[23]

Technical committees

[edit]

The Ecma standards are governed through technical committees assigned to particular areas or topics,[24] such as:

  • TC39 – responsible for ECMAScript.[25]
  • TC45 – responsible for Office Open XML.[23]
  • TC53 – responsible for ECMAScript Modules for Embedded Systems.[26]

Eco declaration

[edit]

In Ecma International Standard 370,[27] Ecma joined with the Scandinavian IT Eco Declaration organisation to put forward a guideline for informing consumers about the environmental practices of the manufacturers of ICT and consumer electronics products.

The IT Eco Declaration includes information on the environmental practices of the manufacturer as well as product features, such as environmentally conscious design, batteries, acoustic noise, electrical safety, energy consumption, chemical emissions, substances and materials included, and packaging. This makes it easy to compare different suppliers and their products, as they all present the environmental features of their products in the same way, through a common industry standard reporting form.

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Ecma International

View on Grokipedia
from Grokipedia
Ecma International is a Swiss-based, non-profit international dedicated to developing and publishing standards for information and communication technology (ICT) systems. Founded on 17 May 1961 as the European Computer Manufacturers Association (ECMA) in response to the need for compatibility among early computer manufacturers, it evolved to address global needs and officially adopted the name Ecma International in 1994 to reflect its worldwide focus. Headquartered in , the organization operates through a consensus-driven process involving technical committees to create open standards that promote and innovation in the ICT sector. The organization's structure centers on its , composed of ordinary members, which serves as the highest authority overseeing management, secretariat operations, and strategic direction. Membership is open to a variety of entities, including company members (such as ordinary, associate, small and medium enterprises, and small profit companies) and not-for-profit organizations, enabling participation from large corporations, trade associations, universities, and . Ecma International emphasizes rapid, industry-led to foster competition based on rather than proprietary technologies, building trust among vendors and users in emerging ICT areas. Among its most notable contributions, Ecma International has produced over 400 standards since its inception, including ECMA-262 (defining the ECMAScript programming language specification, foundational to JavaScript implementations), ECMA-404 (standardizing JSON for data interchange), ECMA-335 and ECMA-334 (specifying the Common Language Infrastructure and C# programming language for .NET), and ECMA-376 (covering Office Open XML formats for document processing). Many of these standards are subsequently adopted by the International Organization for Standardization (ISO), enhancing their global applicability and influence in software development, data formats, and system interoperability.

History

Founding and Early Development

Ecma International traces its origins to the burgeoning European computer industry of the late , when the need for standardized operational techniques became evident amid diverse manufacturer offerings. On April 27, 1960, representatives from key companies gathered in for an initial meeting to discuss forming an association dedicated to standardization. This effort was spearheaded by Compagnie des Machines Bull, World Trade Europe Corporation, and International Computers and Tabulators Limited, who issued a joint invitation to other European firms in the field. The European Computer Manufacturers Association (ECMA) was officially established on June 17, 1961, during its constituent assembly, marking the formal creation of the organization as a non-profit industry body. Its primary aims focused on developing standards for and communication techniques, including programming languages, codes, and data interchange protocols, to enable compatibility across systems from different manufacturers and foster the growth of the European computing sector. Headquarters were established in , , selected for its closeness to international bodies such as the (ISO) and the (IEC). The first president was C.G. Holland-Martin of International Computers and Tabulators, serving from 1961 to 1962, while D. Hekimi acted as the inaugural Secretary-General. In its early years during the , ECMA achieved significant milestones by publishing foundational standards that addressed critical challenges. Notable among these was ECMA-1, released in March 1963, which defined a 6-bit character code for general usage, encompassing letters, figures, , symbols, and controls. This was followed by ECMA-6 in April 1965, standardizing a 7-bit coded character set for information interchange, and other early works on interchange formats that laid groundwork for broader European and . These efforts positioned ECMA as a pivotal force in early , evolving over time to encompass a global scope.

Global Expansion and Renaming

During the early , Ecma experienced a surge in participation from non-European entities, shifting its focus from a predominantly regional body to one with broader global engagement. This evolution culminated in a formal in 1994 from the European Computer Manufacturers Association (ECMA) to Ecma International, a move designed to encapsulate its expanding worldwide activities and diverse membership base. Under Secretary General Jan van den Beld, who led the organization from 1992 to 2007, Ecma achieved full international status as a non-profit association incorporated under the , which facilitated its operations as a neutral, globally oriented standards body. He passed away on 27 August 2025. This restructuring underscored Ecma's commitment to producing standards, allowing for open adoption without licensing encumbrances and promoting across international borders. Membership growth accelerated during this decade, evolving from primarily European hardware manufacturers to encompass major global technology companies, including U.S.-based firms like and , which joined to collaborate on emerging software standards. By 1994, Ecma had published more than 160 standards, reflecting its maturing role in and . A pivotal 1990s development was the establishment of Technical Committee 39 (TC39) in November 1996, tasked with standardizing scripting languages for web applications, such as the specification for that harmonized implementations like and . This initiative exemplified Ecma's adaptation to rapidly evolving digital technologies and its strategy to foster industry-wide consensus on innovative protocols.

Organizational Structure

Membership Categories

Ecma International offers five distinct membership categories designed to accommodate a wide range of stakeholders in the (ICT) sector, ensuring broad participation in its standardization efforts. These categories include Ordinary, Associate, Small and Medium-sized Enterprise (SME), Special Partner Category (SPC), and Not-for-Profit (NFP) members, each with tailored rights, fees, and participation levels to support contributions to technical committees and global standards development. Ordinary members, such as Apple, Bloomberg, Google Inc., Huawei Technologies Co., Ltd., Europe, and Meta, Inc., hold full voting rights in the General Assembly and technical committees, allowing them to influence key decisions on standardization projects. They pay the full annual membership fee, which is set by the General Assembly based on the organization's budget. Associate members, including major companies like Alibaba, Microsoft Corporation, and America, Inc., participate actively in technical committees with voting rights there but lack voting privileges in the General Assembly; their fees are set at 50% of the full amount to encourage involvement from larger entities without full governance access. For smaller organizations, the SME category targets enterprises with annual global turnover under CHF 100 million, exemplified by members like , S.L. and , offering rights similar to Associates but with fees at 25% of the full rate and participation limited to one technical committee. The SPC category supports even smaller private entities with fewer than 25 employees and turnover below CHF 10 million, such as Deno Land Inc. and Zalari GmbH, providing access to one technical committee at approximately 5% of the full fee to foster innovation from niche contributors. NFP members, including the , various universities like ETH Zürich and UC Santa Cruz, and open-source groups like the , join without fees and observe General Assembly meetings while participating in technical committees, enabling non-commercial entities to shape ICT norms. Membership across these categories provides key benefits that advance Ecma's goals, including active involvement in technical committees to develop and review draft standards, access to working documents and emerging trends, and the opportunity to influence international ICT norms through collaboration with diverse experts. As of January 2025, Ecma International counted 81 members—9 Ordinary, 18 Associate, 5 SME, 9 SPC, and 40 NFP—spanning tech giants, SMEs, academia, research institutions, and open-source communities from regions including , , and . In June 2025, six new members joined: Consensys Software (Associate), Socket (SPC), (NFP), (NFP), (NFP), and The University at Buffalo (NFP). Prospective members apply in writing to the Secretary General, demonstrating alignment with Ecma's aims of promoting ICT ; applications are reviewed and approved by the General Assembly requiring a two-thirds majority vote of Ordinary members present. This process ensures that new members contribute meaningfully to Ecma's collaborative environment without overlapping with governance roles detailed elsewhere.

Governance and Leadership

The General Assembly serves as the highest authority within Ecma International, comprising representatives from all membership categories, including Ordinary, Associate, SME, SPC, and Not-for-Profit members. It convenes annually in to elect officers, approve the budget and accounts, review membership applications, and ratify standards developed by technical committees, requiring a two-thirds majority vote among Ordinary Members for such approvals. The Executive Committee oversees the organization's day-to-day operations, strategic direction, and administrative matters, making recommendations to the General Assembly on business, legal, and managerial issues, as well as the establishment and activities of technical committees. It consists of the three principal officers—President, Vice-President, and —along with up to eight representatives from Ordinary Members and up to four from other membership categories, elected for one-year terms by simple majority vote at the General Assembly. As of 2025, the leadership is headed by President Daniel Ehrenberg from Bloomberg, who was elected to the role and chairs the Executive Committee; Vice-President Jochen Friedrich from ; and Treasurer Luoming Zhang from . The Secretariat, based in , , supports these efforts under Secretary General Samina Husain, with key staff including Chief Technical Officer Patrick Lüthi and Office Manager Isabelle Walch. Decision-making emphasizes consensus and member participation, with most General Assembly resolutions passing by simple majority of Ordinary Members present or represented by proxy, while major actions such as standard approvals, constitutional amendments, or membership terminations require a two-thirds majority. Officers are elected annually, with nominations submitted 45 days in advance, and terms limited to three consecutive years for the President and Vice-President to ensure rotation. Voting rights in the General Assembly are weighted by membership category, with Ordinary Members holding the primary influence. Ecma International recognizes outstanding long-term contributions through the Ecma Fellows program, which honors individuals who have significantly advanced its standardization efforts in information and communication technologies. For instance, was awarded Ecma Fellow status in 2019 for his leadership in developing the standard. The organization's leadership has evolved since its founding in 1961 as the European Computer Manufacturers Association, initially focused on European industry collaboration, to reflecting a global scope following its 1994 renaming to Ecma International. Below is a list of past Presidents from 1961 to 2024:
YearsNameAffiliation
1961-1962C. G. Holland-MartinICT
1963-1964J. EngelfrietEL
1965-1966M. R. PedrettiIBM
1967-1968J. M. M. PinkertonICL
1969-1970P. J. DavousBull
1971-1972K. ScheidhauerAEG-Tfk
1973-1974J. M. M. PinkertonICL
1975J. van EijbergenPhilips
1976-1977W. HeimannSiemens
1978-1979M. H. JohnsonFerranti
1980-1981J. van EijbergenPhilips
1982-1983H. FeisselCii HB
1984-1985J. ScherpenhuizenDigital
1986-1987C. RossettiSTET
1988-1989J. DubosBull
1990Jan van den BeldPhilips
1991-1992Gerhard HaberzettlSiemens Nixdorf
1993-1994Werner BrodbeckIBM
1995-1996Dieter GannHP
1997-1998P. A. TrudgettBT
1999-2000Malcolm BermangeXerox
2001-2002Peter HofmannIBM
2003-2004Stan StattIntel
2005-2006Harald TheisAvaya
2007-2008John NeumannToshiba
2009-2010Paul WeijenberghPhilips
2011-2012Josée AuberHP
2013-2014Isabelle Valet-HarperMicrosoft
2015-2017Kei YamashitaHitachi
2018-2019Jochen FriedrichIBM
2020-2021Isabelle Valet-HarperMicrosoft
2022-2024Jochen FriedrichIBM

Aims and Principles

Standardization Objectives

Ecma International's primary aim is to foster , innovation, and market confidence in information and communication technologies (ICT) and (CE) through the development of voluntary, consensus-based standards. This organization pursues these goals by creating high-quality standards and technical reports that enable efficient data interchange and compatibility across diverse systems and manufacturers, thereby supporting pre-competitive collaboration among industry stakeholders. The focus areas encompass key domains such as programming languages, data formats, environmental declarations, and emerging technologies including and . By addressing these sectors, Ecma International ensures that standards promote seamless integration and adaptability in rapidly evolving technological landscapes, without imposing regulatory mandates. Central principles guiding Ecma's standardization efforts include an agile, consensus-driven process that fast-tracks development and emphasizes licensing where possible to encourage widespread adoption. Standards are often submitted to ISO/IEC JTC 1 for international adoption, with many Ecma standards having been adopted by ISO/IEC JTC 1, facilitating global harmonization. These principles also align with (WTO) guidelines, ensuring non-discriminatory access. The benefits of Ecma's approach include reducing by minimizing proprietary barriers, bolstering open-source initiatives through free publication of standards, and enhancing overall market efficiency via early identification of technological trends. This voluntary framework not only accelerates innovation but also builds trust among users and developers by promoting reliable, interoperable solutions worldwide.

Intellectual Property Policies

Ecma International's intellectual property policies emphasize openness and accessibility to foster widespread adoption of its standards. Central to these policies is the encouragement of (RF) licensing, where members commit to offering implementations on RF terms. This can be achieved through reasonable and non-discriminatory (RAND-RF) commitments or by designating specific technical committees or task groups as entities, requiring participants to grant licenses free of charge for claims on a worldwide, non-discriminatory basis. IPR disclosure is a mandatory during technical committee work, ensuring transparency in the process. Members must promptly disclose any known or patent applications that may be essential to a proposed standard, submitting formal patent statements to the Ecma Secretariat. This early identification helps mitigate potential barriers to implementation. The overarching policy framework is governed by the Ecma in Patent Matters, which promotes licenses for essential on non-discriminatory and reasonable terms, with the RF extension option allowing such claims to be licensed without monetary compensation. To address potential patent issues, Ecma employs mechanisms such as consensus for resolving disclosures and provisions in the RF policy, enabling entities to exclude specific after a review period of at least 60 days. These protections ensure that standards development proceeds without undue encumbrances while maintaining fairness. Additionally, Ecma's policies align with broader goals by enabling to technologies essential for compatible systems. In collaboration with ISO/IEC, Ecma's IPR framework supports fast-track adoption of its standards by ISO/IEC JTC 1, preserving open IPR conditions to facilitate international recognition without additional licensing restrictions. policies complement these efforts, granting non-exclusive, permissions for copying and using Ecma standards, subject to attribution and requirements.

Technical Committees and Processes

Committee Structure and Operations

Ecma International conducts its technical work through Technical Committees (TCs) and Task Groups (TGs), with 17 active TCs and numerous TGs operating as of 2025. Each TC focuses on a specific domain, such as scripting languages through TC39 (), document formats via TC45 (), or file systems under TC11, which has since accomplished its tasks. Historically, Ecma has established 56 TCs since its founding in , with 39 having completed their mandates. TCs are structured with a and often a vice-chair, provisionally nominated by the Executive Committee and elected by TC members, and a provided by the Secretariat, to lead activities. These committees are open to participation by Ecma members, with non-members allowed as observers, and TCs may form subordinate TGs to address focused subtopics within their scope. Membership in TCs and TGs rotates based on participants' active contributions and project requirements, ensuring dynamic involvement aligned with ongoing needs. Operations involve regular collaboration to develop standards and technical reports, with TCs meeting through a mix of virtual sessions and in-person gatherings hosted in or by member organizations. For instance, TC39 convenes multiple times annually to advance the specification, resulting in yearly editions of the standard, such as the 16th edition adopted in June 2025. Outputs from these bodies include formal Ecma standards and technical reports, which undergo consensus-based review before approval by the General Assembly.

Standardization Procedures

Ecma International's standardization procedures commence with the initiation phase, where a proposal for a new work item is submitted to the Executive Committee (ExeCom) by any member or group of members. The proposal must include a draft scope, work programme, and provisional leadership nominations, and requires support from at least three Ecma members to proceed. If provisionally approved by the ExeCom, a Technical Committee (TC) or Task Group (TG) is formed, and the Secretary General convenes the inaugural meeting, enabling work to begin within two weeks. This rapid setup ensures timely response to industry needs. In the development phase, the TC or TG engages in drafting the standard through consensus-building among small teams of volunteers from member organizations. Contributions are shared at least in advance of meetings to facilitate informed discussion, with decisions made by simple majority vote within the committee if consensus is not achieved immediately—one vote per Ecma member. The process prioritizes flexible, pragmatic methods to produce high-quality documents, including standards and exploratory technical reports, while aligning with market requirements and technological evolution. Technical reports serve as non-normative guides for potential future standards. Drafts advance to the approval phase once mature, with the final draft submitted to the General Assembly (GA) at least two months prior to its semiannual meetings in June and December for member review. Approval requires a two-thirds vote among Ordinary members present, ensuring broad support. Upon , the standard is published freely on Ecma's website in English, with official translations possible in other languages. Ecma routinely submits approved standards to ISO/IEC JTC 1 via the fast-track procedure, which accelerates international recognition and adoption, often within months. For urgent needs, the provisional ExeCom approval allows accelerated internal development before full GA confirmation. Revisions to existing standards follow a similar process, initiated as new work items within relevant TCs to incorporate updates and refinements. Evolving standards, such as (ECMA-262), undergo annual revisions to address emerging features and community feedback, with editions released each June. This iterative approach maintains relevance, with TC semi-annual progress reports to the ExeCom guiding ongoing maintenance. The overall timeline for developing a standard typically spans 12 to 24 months for comprehensive efforts, though the structure enables faster cycles for simpler or urgent projects compared to other standards bodies.

Major Standards

Programming Languages

Ecma International has played a pivotal role in standardizing programming languages through its technical committees, with (ECMA-262) serving as one of its most influential contributions. First published in 1997 as the inaugural edition, ECMA-262 defines the core syntax, semantics, and features of the language, which forms the basis for implementations across web browsers and environments. The standard has evolved continuously under Ecma Technical Committee 39 (TC39), which has overseen more than two decades of development, incorporating enhancements to support modern needs such as , functional constructs, and asynchronous operations. Since 2015, ECMA-262 has followed an annual release cycle, ensuring timely integration of community-proposed features through TC39's rigorous process. The 16th edition, released in June 2025, introduces advancements including iterator helper methods for streamlined asynchronous data processing, new Set methods for efficient collection operations, attributes for specifying module metadata, RegExp.escape() for safer string-to-regex conversion, .try() for simplified error handling in promises, and Float16Array for half-precision floating-point support in typed arrays. These updates build on prior innovations like async from the 2018 edition, enhancing the language's capability for concurrent programming without blocking execution. ECMAScript's widespread adoption powers the majority of , with present on approximately 98.9% of all websites as of late 2025. Another key standardization effort by Ecma is , specified in ECMA-334. Initially approved in December 2001 as the first edition—following initial development announcements in 2000—this standard describes C#'s syntax, , and semantics, positioning it as a modern, object-oriented language designed for . The latest 7th edition, published in December 2023, incorporates contemporary features such as binary integer literals, global using directives, file-scoped namespaces, and extensions to and records introduced in earlier revisions, enabling more concise and in code. By standardizing C#, Ecma-334 facilitates interoperability within the .NET ecosystem, allowing developers to build cross-platform applications that leverage the (CLI) for shared runtime services and library compatibility. Historically, Ecma International explored standardization of the Java programming language in the late 1990s. In 1999, Sun Microsystems submitted Java technology to Ecma for potential adoption as an international standard, aiming to promote open interoperability amid growing industry interest. However, Sun withdrew from the process shortly thereafter, and no dedicated Ecma standard for Java was produced; efforts became inactive following Oracle's acquisition of Sun in 2010, with Java's governance remaining under Oracle's control.)

Document and Data Formats

Ecma International has developed key standards for document and data formats, focusing on XML-based office productivity files, lightweight data interchange syntax, and file systems for optical media. These standards promote , portability, and efficient data handling across applications and platforms. (OOXML), specified in ECMA-376, is a comprehensive standard for representing word-processing documents, spreadsheets, and presentations in an XML-based, zipped package format. First standardized in its 1st edition in December 2006, it has evolved through multiple editions, with the 5th edition published in December 2021. The standard comprises four main parts: Part 1 defines the fundamentals and references for core document features in applications like , Excel, and PowerPoint; Part 2 covers for file structure and relationships; Part 3 addresses markup compatibility and extensibility to ensure ; and Part 4 details transitional migration features for legacy formats. ECMA-376 aligns closely with the international standard ISO/IEC 29500, facilitating global adoption in office suites such as , where it has served as the default file format since 2007, and in various open-source and third-party implementations. Technical Committee 45 (TC45), established under Ecma International, oversees the development, maintenance, and evolution of OOXML, ensuring compatibility with while incorporating contributions from diverse stakeholders to support across productivity applications. TC45 continues to update the standard and contributes to its ISO/IEC maintenance through joint efforts with JTC 1/SC 34. The data interchange format, defined in ECMA-404, provides a lightweight, text-based, language-independent syntax for structuring and exchanging data objects. Its 1st edition was published in October 2013, followed by the 2nd edition in December 2017, which refined the syntax rules without altering core semantics or language mappings. uses simple conventions like braces for objects, brackets for arrays, and colons for key-value pairs, making it ideal for web APIs, configuration files, and data serialization in programming environments. Derived from specifications and managed by TC39, it holds the ISO/IEC designation 21778 and is widely used for data exchange in web applications and services due to its and . Ecma International also maintains standards for optical media file systems through ECMA-167, the Volume and File Structure for Write-Once and Rewritable Media using Non-Sequential Recording, originally published in its 1st edition in June 1992 and updated to the 3rd edition in June 1997. This standard specifies volume recognition, boot blocks, file structures, and record formats for interchange on optical discs, supporting read-only, write-once, and rewritable media. Complementing ECMA-167, Technical Report TR/112 provides detailed (UDF) specifications, with its 1st edition parts released in December 2023 to address modern storage needs, including extensions for sequential media, secure domains, and compatibility with DVD and Blu-ray formats. These updates ensure robust support for contemporary applications.

Other Key Standards

Ecma International maintains a diverse portfolio of 426 standards as of 2025, encompassing areas beyond programming languages and document formats, with a significant emphasis on , , and emerging technologies such as and (IoT) connectivity. Many of these standards, approximately three-quarters historically, have been adopted or served as the basis for ISO/IEC JTC 1 specifications, facilitating global interoperability in information and communication technologies. This section highlights representative examples in , , AI-related efforts, and IoT protocols, reflecting Ecma's role in foundational and forward-looking standardization. One of Ecma's earliest and most influential contributions is in , beginning with ECMA-6, the 7-bit coded character set first published in 1968 and revised through editions up to the 6th in 1991. This standard defines a basic set of 128 characters, including control and graphic symbols, compatible with ASCII and serving as a cornerstone for international data interchange. Building on it, ECMA-43, introduced in 1974 and updated to its 3rd edition in 1991, extends to an 8-bit coded character set structure, providing rules for additional characters while maintaining compatibility with the 7-bit base. These encodings laid groundwork for modern systems, directly influencing the development of by establishing principles for character set extension and multinational compatibility. In the domain of security, Ecma has addressed protections for media and systems through technical reports and standards, such as the requirements for audio and video in ECMA-287 (2nd edition, 2002), which covers electrical and mechanical hazards in up to 600V. More recently, ECMA-424 (1st edition, June 2024) standardizes the CycloneDX software bill-of-materials format, enhancing by enabling detailed tracking of components, including models and datasets to mitigate risks in AI-integrated systems. This standard supports and compliance, particularly for software ecosystems incorporating AI elements. Ecma's emerging work in focuses on interchange formats and protocols to support regulatory and needs. Post-2023 initiatives, including contributions from Ecma's leadership to ISO/IEC workshops, emphasize standards for AI governance and . For instance, Technical Committee TC56's efforts on the Natural Language Interaction Protocol (NLIP), revised in 2025, define semantics for AI agent communications, including bindings for efficient data exchange in multimodal applications. For IoT and , Ecma standards promote low-power, secure connectivity, exemplified by ECMA-340 (4th edition, June 2024), which specifies the (NFC) interface and protocol for short-range wireless interactions in devices like smart cards and sensors. This standard, adopted as ISO/IEC 18092, enables energy-efficient data transfer in consumer and industrial IoT applications, supporting broader goals by reducing power consumption in wide-area deployments.

Environmental Initiatives

Eco Declaration Program

The Eco Declaration Program, managed by Ecma International's Technical Committee 38 (TC38), establishes a standardized framework for the voluntary self-declaration of environmental attributes associated with information and communication technology (ICT) and products. Originating in 1996 as the IT Eco Declaration developed by the Swedish industry association IT Företagen, the initiative was harmonized in 2006 with Ecma's TR/70 to form the international standard ECMA-370, titled "The Eco Declaration" (TED). This program enables manufacturers to disclose key data on , material usage, chemical substances, emissions, and , promoting transparency and comparability without mandatory . ECMA-370 provides detailed guidelines for completing declaration sheets, encompassing the full from sourcing and through use, , and disposal or . The standard outlines measurement methods aligned with relevant regulations, industry guidelines, and international norms, such as those for restricted substances (e.g., RoHS compliance) and energy efficiency (e.g., specifications). It includes annexes tailored to specific product categories, like imaging equipment (Annex B1) and computers/monitors (Annex B2), ensuring declarations address category-specific impacts like acoustic noise or battery recyclability. The 6th edition, published in June 2019 with corrections in December 2019, refines these elements to reflect evolving legal requirements and best practices. Manufacturers worldwide utilize the program to meet regulatory obligations, particularly under directives such as the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE), by providing verifiable environmental data to regulators, customers, and partners. The submission is straightforward and voluntary: companies complete a fixed-format template with product-specific information, supported by test results or specifications, and publish the declaration publicly. Ecma reviews submissions for adherence to the standard's structure and consistency but does not issue certifications or verify underlying data accuracy, emphasizing self-responsibility while fostering trust through uniformity. This initiative aligns with Ecma's overarching sustainability efforts by encouraging lifecycle-based environmental improvements in ICT and CE sectors.

Sustainability and Broader Efforts

Ecma International has integrated sustainability into its core activities, with a particular focus on green (ICT). Technical Committee 38 (TC38), active through the present, identifies and describes environmental attributes of ICT and (CE) products across their full lifecycle—from conception to end-of-life treatment—while monitoring related regulations and conformity schemes. This work extends to principles, as seen in TC38's guidelines for end-of-life management. It also includes TC56's development of secure protocols for AI agent communications to ensure efficient and trustworthy interactions. Ecma's efforts align with broader environmental management frameworks, including the Eco Declaration standard (ECMA-370), which supports voluntary disclosure of product attributes. Ecma collaborates closely with the (ISO) and (IEC) through A-liaison status with ISO/IEC JTC 1/SC 39, the subcommittee on , IT, and data centres, facilitating joint work on , resilience, and in ICT. These partnerships ensure alignment with standards like ISO 14001 for environmental management systems. The Ecma Memento 2025 underscores the contributions of its diverse membership—spanning industry, academia, , and open-source communities—in advancing low-energy standards, such as ECMA-383 for measuring in personal products and ECMA-328 for chemical emissions from electronic equipment. Looking ahead, Ecma plans to expand technical committee activities to promote climate-neutral technologies, building on its longstanding track record of environmental standards and reports, including ECMA-341 on considerations (editions since 2008) and ECMA-389 on energy efficiency in broadband .

References

  1. https://ecma-international.org/mission/
  2. https://ecma-international.org/history/
  3. https://ecma-international.org/organisation/
  4. https://ecma-international.org/members/
  5. https://ecma-international.org/publications-and-standards/standards/
  6. https://ecma-international.org/publications-and-standards/standards/ecma-262/
  7. https://learn.microsoft.com/en-us/dotnet/fundamentals/standards
  8. https://dl.acm.org/doi/pdf/10.1145/366604.366607
  9. https://ecma-international.org/news/ecma-international-celebrates-its-60th-anniversary/
  10. https://ecma-international.org/wp-content/uploads/Ecma-memento-1962-public.pdf
  11. https://ecma-international.org/publications-and-standards/standards/ecma-1/
  12. http://www.openstandards.net/viewOSnet2C.jsp?showModuleName=Organizations&mode=1&acronym=ECMA
  13. https://ecma-international.org/news/loss-of-an-ecma-colleague-and-friend-jan-van-den-beld-former-ecma-secretary-general/
  14. https://www.researchgate.net/publication/264789951_International_Standards_in_Flux_A_Balkanized_ICT_Standard-Setting_Paradigm_and_its_Implications_for_the_WTO
  15. https://ecma-international.org/policies/by-ipr/
  16. https://ecma-international.org/wp-content/uploads/Ecma-memento-1994-public.pdf
  17. https://www.wirfs-brock.com/allen/jshopl.pdf
  18. https://ecma-international.org/news/ecma-262-the-ecmascript-javascript-the-most-popular-web-scripting-standard-is-celebrating-its-20th-birthday/
  19. https://www.loc.gov/preservation/digital/formats/fdd/fdd000443.shtml
  20. https://ecma-international.org/wp-content/uploads/Ecma-memento-2025-public.pdf
  21. https://ecma-international.org/policies/rules/
  22. https://ecma-international.org/news/ecma-international-welcomes-new-members-9/
  23. https://ecma-international.org/ecma-fellow-awards-and-ecma-recognition-awards/
  24. https://www.ecma-international.org/wp-content/uploads/Ecma-memento-2025-public.pdf
  25. https://ecma-international.org/policies/by-ipr/royalty-free-patent-policy-extension-option/
  26. https://ecma-international.org/policies/by-ipr/code-of-conduct-in-patent-matters/
  27. https://ecma-international.org/policies/by-ipr/ecma-text-copyright-policy/
  28. https://ecma-international.org/policies/by-ipr/ecma-international-policy-on-submission-inclusion-and-licensing-of-software/
  29. https://ecma-international.org/technical-committees/tcs-which-have-accomplished-their-tasks/
  30. https://www.ecma-international.org/wp-content/uploads/ecmaflyer.pdf
  31. https://dev.ecma-international.org/wp-content/uploads/Ecma_rules_june_2022.pdf
  32. https://ecma-international.org/wp-content/uploads/Ecma-Code-of-Conduct-in-Patent-Matters-Version-2.pdf
  33. https://ecma-international.org/wp-content/uploads/ECMA-262_16th_edition_june_2025.pdf
  34. https://tc39.es/
  35. https://tc39.es/ecma262/2025/
  36. https://2ality.com/2025/06/ecmascript-2025.html
  37. https://w3techs.com/technologies/details/cp-javascript
  38. https://ecma-international.org/publications-and-standards/standards/ecma-334/
  39. https://ecma-international.org/wp-content/uploads/ECMA-334_7th_edition_december_2023.pdf
  40. https://www.hpcwire.com/1999/05/14/sun-submits-java-technology-to-ecma-for-standardization/
  41. https://ecma-international.org/publications-and-standards/standards/ecma-376/
  42. https://ecma-international.org/wp-content/uploads/OfficeXML-White-Paper-v2008-10-03.pdf
  43. https://ecma-international.org/technical-committees/tc45/
  44. https://www.ecma-international.org/wp-content/uploads/OfficeXML-White-Paper-v2008-10-03.pdf
  45. https://ecma-international.org/publications-and-standards/standards/ecma-404/
  46. https://ecma-international.org/wp-content/uploads/ECMA-404_2nd_edition_december_2017.pdf
  47. https://www.vldb.org/pvldb/vol18/p4938-carey.pdf
  48. https://ecma-international.org/publications-and-standards/standards/ecma-167/
  49. https://ecma-international.org/wp-content/uploads/ECMA_TR-112-1_1st_edition_december_2023.pdf
  50. https://ecma-international.org/publications-and-standards/standards/ecma-6/
  51. https://ecma-international.org/publications-and-standards/standards/ecma-43/
  52. https://ecma-international.org/wp-content/uploads/ECMA-43_3rd_edition_december_1991.pdf
  53. https://ecma-international.org/wp-content/uploads/ECMA-287_2nd_edition_december_2002.pdf
  54. https://ecma-international.org/wp-content/uploads/ECMA-424_1st_edition_june_2024.pdf
  55. https://cyclonedx.org/news/cyclonedx-v1.6-now-an-ecma-international-standard/
  56. https://ecma-international.org/news/ecma-president-jochen-friedrich-presenting-on-ai-standardization-supporting-regulatory-needs-during-the-inaugural-iso-iec-ai-workshop/
  57. https://ecma-international.org/news/call-for-participation-and-comments-on-revised-nlip-specification-and-new-websocket-binding/
  58. https://www.ecma-international.org/wp-content/uploads/ECMA-370_6th_edition_june_2019.pdf
  59. https://ecma-international.org/publications-and-standards/standards/ecma-370/
  60. https://ecma-international.org/technical-committees/tc38/
  61. https://ecma-international.org/wp-content/uploads/ECMA-370_6th_edition_june_2019_withcorrigendum.pdf
  62. https://ecma-international.org/faq/
  63. https://global.brother/en/sustainability/eco/product/declaration
  64. https://www.lenovo.com/us/en/compliance/eco-declaration/
  65. https://www.iso.org/organization/9018.html
  66. https://www.iso.org/committee/654019.html
  67. https://www.ecma-international.org/publications-and-standards/standards/
Add your contribution
Related Hubs
User Avatar
No comments yet.