Hubbry Logo
Flash synchronizationFlash synchronizationMain
Open search
Flash synchronization
Community hub
Flash synchronization
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Flash synchronization
Flash synchronization
Flash synchronization
View on Wikipedia
from Wikipedia

An example of improper synch. Either the flash is firing too late or the shutter speed is too fast (shutter moving vertically). Note the different exposure levels.

In photography, flash synchronization or flash sync is the synchronizing the firing of a photographic flash with the opening of the shutter admitting light to photographic film or electronic image sensor.

PC-socket

In cameras with mechanical (clockwork) shutters synchronization is supported by an electrical contact within the shutter mechanism, which closes the circuit at the appropriate moment in the shutter opening process. In electronic digital cameras, the mechanism is usually a programmable electronic timing circuit, which may, in some cameras, take input from a mechanical shutter contact. The flash is connected electrically to the camera either by a cable with a standardized coaxial PC (for Prontor/Compur) 3.5 mm (1⁄8 in) connector[1] (as defined in ISO 519[2]), or via contacts in an accessory mount (hot shoe) bracket.

Faster shutter speeds are often better when there is significant ambient illumination, and flash is used to flash fill subjects that are backlit without motion blur, or to increase depth of field by using a small aperture. In another creative use, the photographer of a moving subject may deliberately combine a slow shutter speed with flash exposure in order to record motion blur of the ambient-lit regions of the image superimposed on the flash-lit regions.

X sync

[edit]
The photometric output of the GE Synchro-Press No. 11 flashbulb is shown here. Like all "M" bulbs, its peak output was defined as occurring 20 milliseconds after applying electrical current. The No. 11 had a peak luminous flux of 1.8 million lumens. Its rated luminous energy, Qv of 23,000 lumen⋅seconds is the shaded area to the right of the definitional shutter opening point (1/800th of a second before the point of peak luminous flux).

X-sync (for xenon sync) is the simplest mode; the xenon flash is fired at the instant the shutter is fully open. Electronic flash equipment produces a very short flash. X sync is a mode designed for use with electronic flash.[3] In this mode, the timing of the contacts coincides exactly with the full opening of the shutter, since xenon flashes respond almost instantly.

Due to their construction, focal plane shutters, as used on most single-lens reflex cameras (SLRs), only allow normal xenon flash units to be used at shutter speeds slow enough that the entire shutter is open at once, typically at shutter speeds of 1/60 or slower, although some modern cameras may have an X-sync speed as high as 1/500 (e.g. Nikon's D40 DSLRs). Special electronic flash units for focal-plane shutters fire several times as the slit moves across the film. Electronic shutters used in some digital cameras do not have this limitation and may allow a very high X-sync speed.

S, M, ME, F, FP, and V sync

[edit]

Cameras designed for use with flash bulbs generally had one or more of S (slow) sync, M (medium) sync, F (fast) sync, or FP/FPX (flat peak) sync, designed for use with corresponding bulb types. These sync modes close the contacts a few milliseconds before the shutter is open, to give the flashbulb time to reach peak brightness before exposing the film. Class M bulbs reach their peak illumination 20 milliseconds after ignition, and class F lamps reach their peak at approximately 5 milliseconds.[4]

FP sync was used with FP (flat-peak) flash bulbs designed specifically for use with focal-plane shutters. In these shutters, although each part of the film is exposed for the rated exposure time, the film is exposed by a slit which moves across the film in a time (the "X-sync speed") of the order of 1/100"; although the exposure of each part of the film may be 1/2000", the last part of the film is exposed later by the X-sync time than the first part, and a brief flash will illuminate only a strip of film. FP bulbs burned close to full brightness for the full X-sync time, giving time for the moving slit to expose the whole frame with the light of the flash.

The Nikon F offered FP, M, and ME bulb synchronizations, in addition to the X sync.[5]

The Friedrich Deckel Synchro-Compur leaf shutter of the Braun Paxette Reflex offered V, X, and M flash synchronization, whereby V (German: "Vorlauf") was used in conjunction with self-timer.

High-speed sync (HSS)

[edit]

Some modern xenon flash units have the ability to produce a longer-duration flash to permit flash synchronization at shorter shutter speeds, therefore called high-speed sync (HSS). Instead of delivering one burst of light, the units deliver several smaller bursts over a time interval as short as 1/125 of a second. This allows light to be delivered to the entire area of the film or image sensor even though the shutter is never fully open at any moment, similar to FP sync.

Rear-curtain sync

[edit]

Many digital SLRs include an option to fire the flash just before the closing of the shutter, so that moving objects will show a streak where they came from and a sharp image where they were at the end of the exposure—useful for moving objects to convey a sense of speed.[6][7] This mode is called rear-curtain sync or 2nd-curtain sync.[6][7]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Flash synchronization

View on Grokipedia
from Grokipedia
Flash synchronization, commonly referred to as flash sync, is the coordination between a camera's shutter mechanism and an external or built-in photographic flash to ensure the flash fires precisely when the shutter is fully open, exposing the entire image sensor or film evenly to the flash's light output. This process is fundamental in flash photography, preventing issues like black bands or uneven exposure that occur when the flash timing mismatches the shutter's travel. In most modern digital single-lens reflex (DSLR) and mirrorless cameras, flash synchronization relies on a consisting of two curtains that move across the to control exposure. The sync speed represents the fastest at which the entire can be exposed to the flash simultaneously, typically ranging from 1/200 second to 1/250 second depending on the camera model—for instance, cameras often achieve 1/200 second, while Nikon models reach 1/250 second. Exceeding this speed without special modes results in partial exposure, as the second curtain begins closing before the first has fully opened, creating a slit that limits the flash's effective illumination. To overcome sync speed limitations, particularly in bright ambient light where wider apertures and faster shutters are desired, high-speed synchronization (HSS)—also known as FP sync—employs a series of rapid, low-power flash pulses that continuously illuminate the as the shutter slit travels across it, enabling sync at speeds up to 1/8000 second. This mode, available on compatible cameras and flashes like those from Canon and Nikon, reduces the flash's maximum power output but allows for creative control, such as shallow in outdoor portraits. Additional synchronization modes include front-curtain sync, where the flash fires immediately upon shutter opening to freeze initial motion, and rear-curtain sync, which delays the flash until just before the shutter closes, better capturing trailing motion blur for a natural look in dynamic scenes. Synchronization can be achieved through mounts, PC sync cords, or wireless triggers, ensuring reliable off-camera flash use in studio or event photography. Overall, mastering flash synchronization enhances exposure accuracy, motion control, and versatility across lighting conditions, making it a technique for photographers.

Fundamentals

Definition and Purpose

Flash synchronization, commonly referred to as flash sync, is the process of coordinating the firing of a photographic flash with the camera's shutter mechanism to ensure even illumination across the entire frame. This coordination relies on an , often called the synchronizing contact, that triggers the flash precisely when the shutter is fully open, allowing from the flash to expose the or uniformly. The brief duration of a typical electronic flash—usually 1/1000 second or shorter at full power—necessitates this precise timing to prevent issues such as banding or partial exposure, where only portions of the frame receive flash illumination. The purpose of flash synchronization is to enable effective in low-light scenarios by providing supplemental illumination that prevents underexposure, while also serving as fill flash to balance harsh shadows in brighter conditions; its short duration further helps freeze subject motion that might otherwise blur due to longer ambient exposures. To achieve flash synchronization, cameras must feature a mount or PC sync port for connecting compatible electronic flashes, which should operate at sync voltages safe for modern digital single-lens reflex (DSLR) cameras—generally under 250 volts for PC ports to avoid damaging the camera's circuitry. Historically, the concept emerged in the 1930s alongside early flashbulbs that required manual or mechanical timing to account for ignition delays, evolving significantly in the with electronic flashes that provided instantaneous and more reliable .

Sync Speed and Limitations

Sync speed refers to the fastest shutter speed at which the entire or plane is exposed simultaneously during the flash firing, ensuring uniform illumination across the frame. This is typically 1/200 to 1/250 second for modern digital single-lens reflex (DSLR) cameras with focal plane shutters. At this speed, the shutter curtains are fully retracted, allowing the brief flash duration—often 1/1000 second or shorter—to capture the entire scene without obstruction. The theoretical sync speed is determined by the time it takes the shutter to travel across the frame height (typically 24 mm for full-frame s in cameras with vertical-travel shutters), calculated as frame height divided by curtain travel speed. For example, with a curtain speed of 5 m/s, the sync speed is approximately 1/200 second (24 mm / 5 m/s ≈ 0.005 s). This derivation highlights the mechanical constraints of the shutter mechanism, where the first curtain must fully uncover the before the second begins to close. Exceeding the sync speed results in limitations due to the physical movement of the shutter curtains, which create a narrow moving slit across the rather than full exposure. This slit causes the flash to illuminate only a portion of the frame, producing a characteristic black band where light is blocked. Additionally, in bright ambient conditions, using flash at or below sync speed can lead to overexposure from continuous light unless compensated with neutral density (ND) filters or reduced . Several factors influence the achievable sync speed, including the specific camera model—such as 1/60 second for some mirrorless cameras using electronic shutters—flash duration, which must fit within the exposure window, and sensor size, where crop sensors often permit higher sync speeds due to the shorter distance the curtains must travel. Practically, these limitations necessitate slower shutter speeds for daylight flash photography to balance ambient and flash exposure, or reliance on workarounds like high-speed sync (HSS) to enable faster shutters without banding. Focal plane shutters are the primary cause of these slit-related exposure issues.

Shutter Mechanisms

Focal Plane Shutters

Focal plane shutters, commonly found in single-lens reflex (SLR) and mirrorless cameras, consist of two curtains positioned in front of the or plane. The first curtain travels across the frame to initiate exposure, uncovering the sensor row by row, while the second curtain follows to end the exposure by covering it again. This sequential movement creates a controlled exposure duration based on the time between the curtains' travel. At the camera's maximum flash synchronization speed, known as X-sync, there is a brief interval—the X-sync window—during which both curtains are fully retracted, allowing the entire frame to be exposed simultaneously without obstruction. Flash synchronization with focal plane shutters faces inherent challenges due to the rolling nature of the exposure. At shutter speeds faster than the X-sync limit, the second begins its travel before the first has fully uncovered the frame, resulting in a narrow traveling slit of that scans across the . This slit must be at least as wide as the frame height for uniform flash illumination; otherwise, the flash duration—typically much shorter than mechanical shutters—cannot expose the entire frame evenly, leading to dark bands or uneven . The X-sync trigger is typically activated via the camera's , where a low-voltage (often around 5V in modern systems) signals the flash to fire precisely when the shutter reaches full openness. Electronic flashes are compatible with focal plane shutters by delivering their full output instantaneously during the X-sync window, ensuring even illumination across the frame. In contrast, older mechanical focal plane shutters, designed for flash bulbs with longer burn times to reach peak brightness, utilized M-sync mode, which triggered the flash 15-20 milliseconds earlier to align the bulb's peak with the shutter's open period. Examples of X-sync speeds in modern cameras highlight these limitations and variations. The series, such as the EOS 1D X Mark III, achieves a maximum X-sync of 1/250 second with its electronically controlled vertical-travel . Similarly, the offers 1/250 second X-sync using a comparable mechanism. In advanced mirrorless designs, global electronic shutters—unlike traditional rolling ones—eliminate the traveling slit entirely, enabling flash sync at much higher speeds; for instance, Sony's α9 III with its full-frame global shutter supports sync up to 1/80,000 second, as demonstrated in production models rather than mere prototypes.

Leaf Shutters

Leaf shutters are mechanical devices integrated into the lens barrel, consisting of overlapping curved blades that open and close in a radial, scissor-like motion directly behind the lens elements. This design exposes the entire image frame simultaneously and instantaneously, regardless of the selected , as the blades fully uncover the or plane before beginning to close. The primary advantage of leaf shutters for flash synchronization lies in their ability to provide full-frame exposure without the traveling slit limitations of focal plane shutters, enabling reliable flash sync at high speeds up to 1/500 second or faster. For instance, Hasselblad's XCD-series lenses with leaf shutters achieve flash synchronization up to 1/4000 second, offering approximately three stops more sync speed than typical focal plane shutters and making them suitable for studio work or medium-format in bright conditions. This full exposure eliminates uneven illumination or banding issues, providing consistent results with studio strobes. Leaf shutters are typically triggered via a PC sync port on the camera body or lens, which fires the flash at the moment the blades are fully open. They are compatible with dedicated leaf shutter flashes, such as older models designed for mechanical synchronization. Despite these benefits, leaf shutters contribute to bulkier lens designs due to the space required for the blade mechanism, and their maximum speeds are generally lower than those of modern electronic global shutters. Historically, they were widely used in twin-lens reflex (TLR) cameras like the , where sync was possible at all speeds up to 1/500 second. In contemporary applications, the GFX100RF employs a leaf shutter for flash sync up to 1/4000 second in its fixed lens, enabling fill flash in sunlight without high-speed sync modes.

Sync Timing Modes

Front-Curtain Sync

Front-curtain sync, also known as first-curtain sync, is the standard flash synchronization mode employed in most digital and cameras, where the flash is triggered when the shutter's first has fully opened, at the start of the exposure period when the is fully uncovered. This timing ensures that the flash illuminates the entire or plane as it becomes fully uncovered, delivering balanced and even lighting across the frame for the duration of the flash pulse. It serves as the default setting for electronic flashes and is commonly labeled as "normal sync" or "X-sync," distinguishing it from other modes by its alignment with the initial phase of the shutter cycle. In operation, the flash fires at the precise moment the front curtain completes its travel, providing instantaneous illumination that freezes the subject at the beginning of the exposure. For static subjects, this results in sharp, well-exposed images without artifacts, as the flash's short duration (typically 1/1000 second or faster) captures detail effectively before ambient light contributes further. However, when photographing moving subjects with slower shutter speeds to incorporate ambient light, the visual effect positions any motion blur as trails following the subject, which can produce an unnatural "ghosting" artifact where the blur appears to lead or drag behind the frozen form. This mode is particularly suited for scenes lacking strong directional motion, such as portraits in low light, where the early flash burst maintains subject clarity against potentially blurred backgrounds. Configurationally, front-curtain sync is automatically engaged in TTL (Through-The-Lens) automatic exposure modes, where the camera meters and adjusts flash output dynamically, and it adheres to the device's maximum sync speed—often 1/200 second on professional DSLRs—to prevent banding or uneven exposure from the shutter's travel. It remains compatible with both focal plane and leaf shutter mechanisms, though it is optimized for focal plane designs common in single-lens reflex cameras, ensuring reliable performance without specialized adjustments. Applications extend to , indoor portraits, and general low-light scenarios, where the mode's simplicity and even coverage enhance subject isolation without complicating workflow. From a technical standpoint, synchronization occurs through the camera's mount or PC (Prontor-Compur) sync terminal, which delivers a brief electrical —typically a low-voltage signal around 5 volts—to the flash unit at the exposure's t=0 point, prompting the capacitor discharge and light emission. This is generated by the camera's shutter mechanism closing a circuit, compatible with a wide range of flash systems via standardized ISO 519 connectors. Unlike rear-curtain sync, which delays the flash for trailing blur effects in motion , front-curtain sync prioritizes early illumination for straightforward, artifact-free results in static compositions.

Rear-Curtain Sync

Rear-curtain sync, also known as second-curtain sync, is a flash synchronization mode in which the flash is delayed and fires immediately before the second (rear) shutter curtain begins to close, at the end of the exposure duration. In operation, the first shutter curtain opens to begin the exposure, allowing ambient light to capture any motion blur from the subject during the bulk of the exposure time. The flash then illuminates the scene just prior to the rear curtain closing, freezing the subject in its final position. For the intended motion blur effect, this mode is typically used with slower shutter speeds—longer than the camera's standard sync speed—to allow ambient light to capture subject movement before the flash freezes it at the end. At the camera's maximum sync speed, rear-curtain sync behaves the same as front-curtain sync, as the exposure duration equals the curtain travel time with no interval for ambient light. The resulting visual effect depicts the subject sharply lit at the conclusion of its movement, with trailing light streaks or blur leading toward it, imparting a realistic sense of direction and speed. This contrasts with front-curtain sync, the default mode, where the flash fires at the exposure's start, potentially creating an unnatural "ghosting" effect with blur appearing to follow a frozen subject. By positioning the flash at the exposure's end, rear-curtain sync ensures motion trails align intuitively behind the subject, enhancing the perception of forward momentum in the image. To enable rear-curtain sync, photographers manually select the option in the camera's flash settings menu, commonly labeled as "rear," "2nd ," or a similar ; once set, it integrates seamlessly with through-the-lens (TTL) metering for automatic flash exposure adjustments. This mode is exclusively compatible with cameras equipped with focal plane shutters, which feature distinct first and second s to control exposure; leaf shutters, lacking a second , fire the flash throughout the entire exposure and thus do not support rear-curtain timing. Rear-curtain sync finds primary application in action and low-light , where intentional shutter dragging—using extended exposures to blend ambient with flash—conveys dynamic motion, such as trailing headlights from passing cars or the blur of athletes in sports scenes. It is especially effective when a stabilizes the camera to avoid overall image shake, allowing the flash to precisely freeze key elements amid the ambient .

Advanced and Historical Methods

High-Speed Sync (HSS)

High-Speed Sync (HSS), also known as Auto FP sync in some systems, is a flash synchronization technique that allows photographers to use shutter speeds faster than the camera's standard flash sync speed, typically overcoming the limitation of around 1/200 to 1/250 second imposed by focal plane shutters. In this mode, the flash does not emit a single burst of light but instead pulses rapidly—often at rates exceeding 30,000 times per second—throughout the duration of the exposure, effectively mimicking a continuous source that illuminates the entire as the shutter curtains travel across it. This pulsing enables effective up to speeds like 1/8000 second, preventing the black band artifact that occurs when the flash duration exceeds the slit travel time in standard sync. The rapid strobing reduces the flash's overall power output, often to 1/16 or less of full capacity, as the energy is distributed over a longer effective duration rather than concentrated in a brief pulse. Activation of HSS typically occurs through the camera's menu settings, where it is enabled manually or automatically when the shutter speed exceeds the sync threshold on compatible equipment. For Nikon cameras, this is configured as "Auto FP High-Speed Sync" in the custom settings menu, which engages when using i-TTL compatible flashes like the SB-5000, allowing seamless operation without additional flash adjustments. In Canon systems, HSS is selected via the "High-Speed Sync" or FP flash option in the camera or on the Speedlite unit, such as the 580EX series, and it activates similarly for E-TTL flashes. Third-party flashes like those from Godox, including the TT685II-N, are fully compatible with Nikon's i-TTL and HSS protocols, auto-detecting the mode when paired with the camera or a compatible trigger like the XPro-N. The primary benefits of HSS include achieving shallow with wide apertures (e.g., f/2.8) in bright daylight without overexposing the background, as the high controls ambient light while the flash illuminates the subject. It also facilitates motion freezing in dynamic scenes, such as or , without relying on neutral filters to reduce light intake. However, power loss is inherent, with approximated by the formula HSS ≈ 1 / ( / sync speed); for instance, at 1/1000 second with a 1/250 sync speed, drops to about 1/4, requiring higher ISO or closer subject proximity to compensate. Limitations encompass reduced flash range due to lower output and potential buildup in the flash unit from continuous pulsing. The roots of high-speed flash synchronization trace back to the 1950s, when Leica pioneered (focal plane) sync techniques using long-burning flashbulbs to achieve higher speeds with early focal plane shutters, laying groundwork for modern electronic implementations. HSS as a digital-era feature gained widespread adoption after 2000, driven by advancements in electronic flash control from manufacturers like Nikon and Canon, enabling reliable pulsing for professional outdoor .

Older Sync Modes (S, M, ME, F, FP, V)

Older sync modes, prevalent in film-era cameras from the mid-20th century, were designed to accommodate the varying ignition and burn characteristics of flash bulbs, which required specific timing delays to ensure the light peaked when the shutter was fully open. These modes became widespread during the to , particularly for professional press and studio photography, but fell into obsolescence by the as electronic flashes with near-instantaneous durations (around 1/1000 second) replaced bulbs. Flash bulbs often demanded trigger voltages as high as 300-600V, posing risks to modern electronics if not isolated properly. S-sync, short for "strobe" synchronization, was optimized for short-duration electronic flashes or fast-burning class S and F bulbs with peak times of 5-10 milliseconds, allowing sync speeds up to 1/50 or 1/100 second depending on the shutter mechanism. This mode provided no delay between the sync contact closure and shutter opening, making it suitable for instantaneous light sources and marking a transition from bulb to electronic flash in the 1960s-1970s; Leica IIIf cameras, for instance, supported S-sync at 1/50 second for ordinary bulbs. M-sync, or medium synchronization, incorporated a built-in delay of approximately 15-20 milliseconds to account for the slower peak time of class M bulbs, such as GE #5 or Sylvania M25B, which reached maximum output in 20 milliseconds. This enabled reliable exposure at shutter speeds up to 1/30 or 1/50 second with between-lens or focal-plane shutters, and was common on cameras like TLR models where the delay ensured the 's foil ignited fully before the shutter blades parted. M-sync allowed slightly higher ambient light control compared to slower modes but was limited by bulb variability. F-sync and FP-sync targeted faster and long-burning bulbs, respectively, for focal-plane shutters. F-sync, for class F bulbs peaking in 5 milliseconds (e.g., Sylvania Press 25), used minimal delay for sync speeds up to 1/100 second, as seen in early Leica models. FP-sync, or focal-plane sync, was tailored for class FP bulbs like GE #31 or Sylvania FP26, which maintained near-constant output for 25-35 milliseconds to illuminate the entire frame as the shutter slit traveled across the film plane, enabling speeds up to 1/1000 second—a precursor to modern high-speed sync techniques. Leica IIf and IIIf cameras exemplified this with FP support at high speeds using these long-peak bulbs.

References

  1. https://digital-photography-school.com/understand-flash-sync-speed-so-you-dont-sink-your-photo-shoot/
  2. https://proedu.com/blogs/photography-fundamentals/flash-sync-simplified-a-beginners-guide-to-perfect-timing
  3. https://www.eos-magazine.com/articles/eospedia/what-is/high-speed-flash-sync.html
  4. https://support.usa.canon.com/kb/s/article/ART157798
  5. https://visualeducation.com/flash-duration-explained/
  6. https://pavilion.dinfos.edu/Article/Article/2304922/know-your-off-camera-flash/
  7. https://www.nikonusa.com/pdf/manuals/Speedlights/SB-28.pdf
  8. https://www.botzilla.com/page/strobeVolts.html
  9. https://petapixel.com/2015/10/05/a-brief-history-of-the-camera-flash-from-explosive-powder-to-led-lights/
  10. https://support.usa.canon.com/kb/s/article/ART136959
  11. https://www.nikonusa.com/learn-and-explore/c/tips-and-techniques/flash-points-the-control-of-light
  12. https://www.scantips.com/lights/flashbasics2c.html
  13. https://www.photrio.com/forum/threads/focal-plane-shutter-speed-tester-calibration.196226/
  14. https://imaging.nikon.com/imaging/lineup/mirrorless/z6_3/
  15. https://support.usa.canon.com/kb/s/article/ART176235
  16. https://imaging.nikon.com/imaging/lineup/dslr/d850/
  17. https://fstoppers.com/lighting/sony-a9-iii-global-shutter-versus-high-speed-sync-659848
  18. https://photo.stackexchange.com/questions/79043/what-is-a-leaf-shutter
  19. https://www.dpreview.com/articles/5816661591/electronic-shutter-rolling-shutter-and-flash-what-you-need-to-know/2
  20. https://www.hasselblad.com/x-system/xcd-4-28p-faq/
  21. https://www.captureintegration.com/the-leaf-shutter-advantage-for-strobe-sync/
  22. https://www.photo.net/forums/topic/168403-what-shutter-speed-for-flash-with-rolleiflex-tlr/
  23. https://www.photo.net/forums/topic/101057-leaf-shutter-and-flash-sync/
  24. https://www.dpreview.com/forums/post/68411634
  25. https://www.dpreview.com/reviews/fujifilm-gfx100rf-review/2
  26. https://www.nikonusa.com/learn-and-explore/photography-glossary
  27. https://www.canon.com.hk/en/club/article/itemDetail.do?itemId=10301
  28. https://www.nikonusa.com/pdf/manuals/Speedlights/SB-800.pdf
  29. https://photo.stackexchange.com/questions/43794/what-are-the-differences-and-adventages-of-using-a-pc-terminal-vs-hot-shoe
  30. https://www.canon.com.hk/en/club/article/itemId=10301
  31. https://cam.start.canon/en/A006/manual/html/UG-02_Advanced_Flash_0060.html
  32. https://www.konicaminoltasupport.com/index.php?id=4569&tx_faqmanager_pi1%5Bquestion%5D=4037&tx_faqmanager_pi1%5Bproduct%5D=136&tx_faqmanager_pi1%5Bproducttype%5D=10&tx_faqmanager_pi1%5Bcategory%5D=&L=%272%3B%27
  33. https://www.largeformatphotography.info/forum/showthread.php?18655-rear-curtain-flash-sync-for-leaf-shutter
  34. https://www.photo.net/forums/topic/302198-second-curtain-sync-wirelessly/
  35. https://onlinemanual.nikonimglib.com/d780/en/12_on-camera_flash_photography_04.html
  36. https://www.nikonusa.com/learn-and-explore/c/tips-and-techniques/high-speed-sync-a-flash-technique-to-add-a-pro-touch-to-your-photographs
  37. https://fstoppers.com/lighting/demystifying-high-speed-sync-68527
  38. https://www.slrlounge.com/glossary/high-speed-sync-hss/
  39. https://www.picturecorrect.com/advantages-and-disadvantages-of-high-speed-sync/
  40. https://www.nikonusa.com/learn-and-explore/c/tips-and-techniques/using-auto-fp-high-speed-sync-to-illuminate-fast-sports-action
  41. https://support.usa.canon.com/kb/s/article/ART121102
  42. https://www.profoto.com/us/en/still-photography/tips-tricks/what-is-high-speed-sync-and-when-should-you-use-it
  43. https://www.kenrockwell.com/leica/screw-mount/iiif.htm
  44. https://www.graflex.org/flash/technical.html
  45. https://www.kenrockwell.com/tech/syncspeed.htm
  46. https://phsc.ca/camera/internal-flash-sync-comes-to-the-leica/
  47. https://filmphotographyproject.com/flash-bulbs-lowdown/
  48. https://jolommencam.com/technical/GRAFLITE/page2.html
Add your contribution
Related Hubs
User Avatar
No comments yet.