Hubbry Logo
LarvicideLarvicideMain
Open search
Larvicide
Community hub
Larvicide
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Larvicide
Larvicide
Larvicide
View on Wikipedia
from Wikipedia
Larvicide CULINEX Tab plus, Bacillus thuringiensis israelensis

A larvicide (alternatively larvacide) is an insecticide that is specifically targeted against the larval life stage of an insect. Their most common use is against mosquitoes. Larvicides may be contact poisons, stomach poisons, growth regulators, or (increasingly) biological control agents.

Biological agents

[edit]
Larva of Aedes aegypti

The biological control agent Bacillus thuringiensis, also known as Bt, is a bacterial disease specific to Lepidopteran caterpillars. Bacillus thuringiensis israelensis, also known as Bti, and Bacillus sphaericus, which affect larval mosquitoes and some midges, have come into increasing use in recent times.[1][2]

Bti and B. sphaericus are both naturally occurring soil bacteria registered as larvicides under the names Bactivec, Bacticide, Aquabac, Teknar, Vectobac, LarvX, and VectoLex CG. Typically in granular form, pellets are distributed on the surface of stagnant water locations. When the mosquito larvae ingest the bacteria, crystallized toxins are produced that destroy the digestive tract, resulting in death. These larvicides will last only a few weeks in water and pose no danger to humans, non-targeted animal species, or the environment when used according to directions.

Chemical agents

[edit]

Methoprene is an insect growth regulator agent that interrupts the growth cycle of insect larvae, preventing them from developing beyond the pupa stage. MetaLarv and Altosid are products containing S-methoprene as the active ingredient. They are usually applied to larger bodies of water in the form of time-release formulations that can last from one to five months. Use of this larvicide does not pose an unreasonable health risks to humans or other wildlife, and it will not leach into the ground water supply. Methoprene is moderately toxic to some fish, shrimp, lobster, and crayfish, and highly toxic to some fish and freshwater invertebrates; it bioaccumulates in fish tissues.[3]

Temephos, marketed as Abate and ProVect, is an organophosphate which prevents mosquito larvae from developing resistance to bacterial larvicides. Due to the small amount needed and the fast rate that temephos breaks down in water, this type of larvicide does not pose an unreasonable health risk to humans, but at large doses it can cause nausea or dizziness. Similarly, there is not a large risk to terrestrial species, but there is a toxic concern for non-targeted aquatic species. Therefore, temephos should be limited only to sites where less hazardous larvicides are ineffective and with intervals between applications.[citation needed]

Copper is also known for its larvicidal properties, and has been tested in field settings to determine its effectiveness and practicality for mosquito control.[4][5]

Acoustic larvicide

[edit]

Sound energy transmitted into water at specific frequencies cause larvae air bladders to instantly rupture, severely damaging internal tissues causing death or latent effects prohibiting further maturity.[6]

Other techniques

[edit]

Larviciding techniques can also include the addition of surface films to standing water to suffocate mosquito larvae, or the genetic modification of plants so that they naturally produce a larvicide in plant tissues.[citation needed]

Research on botanical oils has found neem oil to be larvicidal.[citation needed]

Larvicidal activity of neem oil (Azadirachta indica) formulation against mosquitoes. Median lethal concentration (LC50) of the formulation against Anopheles stephensi, Culex quinquefasciatus and Aedes aegypti was found to be 1.6, 1.8 and 1.7 ppm respectively. The formulation also showed 95.1% and 99.7% reduction of Aedes larvae on day 1 and day 2 respectively; thereafter 100% larval control was observed up to day 7.[7][8]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Larvicide

View on Grokipedia
from Grokipedia
A larvicide is an specifically designed to target and kill the larval and pupal stages of , most commonly mosquitoes, by applying microbial, chemical, or physical agents to aquatic breeding sites such as standing water. These agents prevent immature mosquitoes from developing into biting adults, thereby reducing vector populations and interrupting the transmission of mosquito-borne diseases, including , dengue, Zika, and . Larvicides are a key component of integrated vector management programs, recommended by organizations such as the as a supplementary measure to bed nets and indoor spraying, particularly effective against outdoor-biting and in areas with residual transmission. Larvicides are categorized into several main types based on their mode of action and formulation. Bacterial larvicides, such as Bacillus thuringiensis israelensis (Bti) and Lysinibacillus sphaericus, produce toxins that disrupt the larvae's digestive system upon ingestion, and have been safely used for over 30 years with minimal environmental impact. Insect growth regulators like methoprene and pyriproxyfen mimic or interfere with insect hormones, preventing larvae from molting or pupating into adults. Surface films and oils, including mineral oils, form a barrier on water surfaces that suffocates larvae and pupae by blocking their breathing tubes. Other chemical options, such as organophosphates like temephos, act as neurotoxins but are used less frequently due to resistance concerns. Larvicides are applied in various forms—dunks, granules, or liquids—by homeowners for small containers like birdbaths or tires, and by professionals using ground sprayers or aerial methods for larger habitats like wetlands. All registered larvicides in the United States are evaluated by the Environmental Protection Agency for efficacy and safety to humans, pets, and non-target organisms when used according to label instructions. Ongoing innovations, such as RNAi-based biological larvicides, continue to improve specificity and as of 2025. Historically, larviciding has contributed to major successes, such as the elimination of from parts of and in the mid-20th century, though its global adoption remains limited outside high-burden regions.

Overview

Definition and Scope

A larvicide is an designed to target and kill the larval stages of , particularly those in the order Diptera such as mosquitoes and flies, thereby interrupting their reproductive life cycles and preventing the emergence of adults. This approach focuses on vulnerable immature stages, which are often concentrated in specific breeding sites, making larvicides an efficient tool for population suppression. Key target pests include larvae of mosquito genera like , , and , which are primary vectors for human diseases. Larvicides operate through several general mechanisms to achieve lethality. Contact poisons exert direct toxicity upon physical exposure to the larvae, disrupting cellular functions or nervous systems. Stomach poisons are ingested by feeding larvae, interfering with digestion or internal physiology to cause mortality. Growth regulators mimic or disrupt insect hormones, halting normal development and preventing maturation into pupae or adults. Biological agents induce death via pathogen infection, leading to septicemia or tissue damage after ingestion. The scope of larvicide application is primarily in aquatic environments, where mosquito larvae develop in standing water, as part of vector control programs to mitigate diseases such as , dengue, Zika, and . Non-aquatic uses are less common but include treatment of or waste sites harboring larvae in agricultural settings, such as flooded fields. Larvicides are integrated into broader pest management strategies to enhance efficacy while minimizing environmental impact.

Importance in Vector Control

Larvicides play a critical role in by targeting the aquatic larval stages of , thereby interrupting the transmission cycles of arboviruses such as dengue and Zika, as well as parasites like that cause . By eliminating larvae before they emerge as biting adults, larviciding prevents the maturation of vectors that spread these diseases to humans. In settings with well-defined and accessible larval habitats, hand-applied larvicides have been shown to reduce transmission by 70-90%, significantly lowering the density of adult populations and the risk of disease outbreaks. This approach is particularly effective against species like and , which thrive in predictable breeding sites. On a global scale, larviciding has contributed to substantial reductions in vector-borne diseases, particularly in endemic regions. For instance, the worldwide mortality rate declined by 60% between 2000 and 2019, with interventions—including larval source management—playing a key supportive role in this progress, especially in urban and peri-urban areas of . In urban environments prone to dengue, larvicide applications have demonstrated high efficacy; a program in combining temephos larvicide with source reduction efforts reduced dengue incidence by 98% from 1988 to 1994, eliminating cases in certain years. These interventions highlight larviciding's value in densely populated settings where adult mosquitoes are harder to control. Compared to adulticides, which target flying insects and often require broad aerial or ground spraying, larvicides offer distinct advantages by focusing on immobile larvae in confined water bodies, allowing for precise application and lower overall dosages. This targeted strategy minimizes environmental and reduces human exposure to chemicals, as larvicides are applied directly to breeding sites rather than dispersed over communities. Microbial larvicides, in particular, exhibit no cross-resistance with common adulticide classes like pyrethroids and pose minimal risk to non-target organisms, making them a safer complement to existing control measures. Larviciding is a of the World Health Organization's Integrated Vector Management (IVM) framework, which promotes evidence-based, multi-sectoral strategies to optimize while minimizing ecological impacts. Within IVM, larviciding integrates with source reduction—such as draining stagnant water—to eliminate breeding sites proactively, enhancing cost-effectiveness and in both rural and urban contexts. This holistic approach ensures that larviciding supports broader goals of disease prevention without over-reliance on any single method.

Historical Development

Early Uses and Discoveries

The use of larvicides predates modern chemistry, with communities relying on natural substances to control larvae in bodies. In ancient times, plant extracts and oils served as rudimentary larvicides, applied to disrupt larval development or repel breeding sites. For example, in , extracts from the neem tree () were traditionally employed to deter , a practice rooted in Ayurvedic texts and folk medicine that likely dates back over two millennia. Similarly, mineral oils and were poured on surfaces to suffocate larvae, marking some of the earliest documented interventions in . The transition to more systematic chemical larvicides began in the late with the discovery of the insecticidal properties of , a acetoarsenite compound first synthesized in 1814 as a and first used as an in 1867 against agricultural pests. By the early 1900s, it was adapted for , dusted onto water surfaces to target larvae directly. Its first major large-scale application occurred during the construction from 1904 to 1914, where U.S. Army physician William C. Gorgas integrated Paris Green into a comprehensive prevention strategy, significantly reducing larval populations and enabling project completion. This success demonstrated the potential of targeted larviciding, influencing global efforts in tropical regions. The 1920s to 1940s saw the emergence of synthetic organic compounds, expanding larvicide options amid rising demands for control during . (dichlorodiphenyltrichloroethane), synthesized in 1874 but recognized for insecticidal properties in 1939, was tested as a larvicide in the early 1940s and deployed by Allied forces starting in 1944 to suppress mosquito breeding in military zones, including and Pacific theaters. Concurrently, biological discoveries laid groundwork for future agents; in 1911, German scientist Ernst Berliner isolated from diseased flour moth larvae, identifying its spore-forming properties toxic to certain insects, though practical larvicidal applications remained limited until later decades. Key malaria campaigns in the 1940s highlighted these early chemicals' impact. In , the National Malaria Service and Special Public Health Service initiated widespread larviciding from 1945, using sprays on breeding sites and houses in Amazonian regions like and Amazonas, which curtailed transmission among rubber tappers and reduced incidence by the early 1950s. In , pre-independence efforts by the and local health services employed and pyrethrum for larval control in endemic areas, with introduced by British military units during WWII to protect troops, setting the stage for postwar national programs. These initiatives underscored larvicides' role in scaling beyond environmental measures.

Modern Milestones and Advancements

In the mid-20th century, organochlorine insecticides such as became cornerstone agents in larvicide programs for , particularly from the 1950s through the 1970s, enabling significant reductions in diseases like and . However, widespread resistance in populations emerged by the 1960s, prompting regulatory actions including the U.S. EPA's 1972 ban on most agricultural uses of due to environmental persistence and concerns. This shift accelerated with the 2001 Convention on Persistent Organic Pollutants, which restricted to specific exemptions while aiming for global phase-out. Concurrently, safer alternatives gained traction; , an larvicide, was introduced in the 1960s for targeted application against and larvae, offering lower mammalian toxicity. Another key milestone was the EPA's approval of , the first , in 1975, which disrupted larval development without broad-spectrum killing. The and 1990s marked a pivot toward biological larvicides amid growing emphasis on environmental safety. (Bti), discovered in 1976, received EPA registration in 1980 and saw commercial expansion in the for blackfly and , praised for its specificity to dipteran larvae. By the early 2000s, integrated approaches solidified; the endorsed Integrated Vector Management (IVM) in 2004 through its Global Strategic Framework, promoting combined larviciding with surveillance and community involvement to optimize efficacy and reduce resistance risks. From the 2010s onward, larvicide deployment evolved with technological and programmatic expansions. Aerial larviciding programs proliferated in the U.S., exemplified by New York City's 2025 West Nile virus control plan, which incorporates applications over breeding sites to cover vast urban and rural areas efficiently. The global larvicide market reached approximately $965 million by 2024, reflecting a (CAGR) of about 5% driven by rising vector-borne disease burdens in tropical regions. Larvicides are now deployed in over 100 countries as part of national and dengue programs, per WHO-supported initiatives. Emerging research in 2020 demonstrated acoustic larviciding's potential, where low-frequency (around 20-50 kHz) induces tracheal rupture in larvae, offering a non-chemical alternative in early trials.

Biological Larvicide

Bacterial-Based Agents

Bacterial-based larvicides represent a cornerstone of biological , primarily utilizing spore-forming that produce insecticidal toxins targeting the larval stage. The primary agent is Bacillus thuringiensis subsp. israelensis (Bti), a gram-positive isolated from and aquatic environments, which forms parasporal crystals during sporulation containing Cry (e.g., Cry4Aa, Cry11Aa) and Cyt (e.g., Cyt1Aa, Cyt2Ba) toxins. These toxins, upon ingestion by larvae, solubilize in the alkaline , bind to specific receptors on the epithelial cells, and form pores that disrupt the gut membrane, leading to lysis of midgut cells, , and septicemia. Bti exhibits high against larvae of the Culicidae family, including key vectors like , , and species, with minimal impact on other dipterans or non-target organisms due to its narrow host specificity. Another important bacterial agent is Bacillus sphaericus (Bs, now classified as Lysinibacillus sphaericus), which produces a binary toxin composed of BinA (42 kDa) and BinB (51 kDa) proteins. This toxin binds to glycosphingolipid receptors in the larval , undergoes proteolytic activation, and inserts into the membrane to create channels that cause ion imbalance, cytopathogenic effects, and eventual gut followed by bacterial proliferation and host death. Bs is particularly effective against Culex and Anopheles larvae, complementing Bti in integrated control programs. Commercial products include VectoLex, a Bs-based formulation (strain 2362, H5a5b) available as water-soluble pouches or granules for targeted application, and Vectobac, a Bti-based product (strain AM65-52) offered in aqueous suspensions, water-dispersible granules, or briquettes. These agents are typically deployed in granular, , or formulations directly into standing water bodies such as , ditches, and containers to target breeding sites. Bti and Bs spores and toxins persist in aquatic environments for 1-4 weeks under field conditions, influenced by factors like , temperature, and , providing residual control without frequent reapplication. For instance, Bti achieves an LC50 of approximately 10-20 ppb against larvae in laboratory assays, demonstrating rapid mortality within 24-48 hours at operational doses. Their advantages include exceptional specificity to larvae, rendering them safe for non-target aquatic life such as , amphibians, and beneficial , with no documented field resistance to Bti after decades of global use up to 2025; however, resistance to Bs has been reported in some populations since 1994, often managed through product rotations and combinations with other agents.

Fungal and Viral Agents

Fungal agents, such as Metarhizium anisopliae and , serve as key entomopathogenic biopesticides for mosquito larvicide applications by targeting larval stages through direct contact. These fungi initiate infection via adhesion of conidia to the larval , followed by in humid aquatic environments, formation of appressoria, and penetration of the using a combination of mechanical and cuticle-degrading enzymes like proteases and lipases. Once inside, the fungi colonize the hemocoel, leading to host death typically within 3-7 days through depletion and production, after which new spores emerge from the to propagate the infection. Viral agents, particularly baculoviruses, offer highly specific alternatives for larval control, though their application remains more established against lepidopteran pests than mosquitoes. Examples include mosquito baculoviruses like CuniNPV, which are occluded DNA viruses that infect larvae upon ingestion, replicating in midgut cells and disseminating systemically to cause liquefaction and death; activation often requires cofactors such as magnesium for practical deployment in breeding sites. While baculoviruses like Antheraea eucalypti nucleopolyhedrovirus demonstrate potent lethality in lepidopteran larvae, adaptations for mosquito targets are emerging but constrained by narrow host specificity, resulting in limited field-scale use compared to broader-spectrum agents. Laboratory studies have reported high efficacy for these agents, with fungal formulations achieving up to 95% mortality in mosquito larvae under controlled conditions, such as Beauveria bassiana isolates against Anopheles gambiae. Recent advancements include nano-formulations to enhance spore dispersal and stability, with trials from 2023 onward testing encapsulated Metarhizium anisopliae for improved aquatic persistence against Aedes aegypti. However, challenges persist, including sensitivity to ultraviolet radiation, which degrades conidia and reduces viability in sunlit habitats, necessitating protective carriers like oils or microencapsulation. A notable example is Lagenidium giganteum, an fungus adapted for in and polluted breeding sites, where its zoospores actively seek and infect larvae in freshwater to moderately saline conditions (up to 16-32°C). This has shown 27-100% infection rates in larvae depending on inoculum density and water quality, though its commercial adoption is limited by storage contamination and environmental sensitivity.

Chemical Larvicides

Insect Growth Regulators

Insect growth regulators (IGRs) represent a class of chemical larvicides that target the hormonal and developmental processes of immature s, particularly mosquito larvae, to prevent their maturation into reproductive adults without directly causing acute toxicity. These compounds mimic or interfere with natural insect hormones, such as juvenile hormones or ecdysteroids, leading to disruptions in molting, pupation, or eclosion. IGRs are widely used in integrated vector management programs due to their selectivity for arthropods and relatively low impact on non-target organisms compared to traditional neurotoxic insecticides. IGRs are broadly categorized into two main types based on their mode of action: juvenile hormone analogs and chitin synthesis inhibitors. Juvenile hormone analogs, such as and , function by mimicking the that maintains larval characteristics, thereby inhibiting the process of eclosion and resulting in the production of non-viable adults or malformed pupae. Chitin synthesis inhibitors, exemplified by , block the formation of , a key component of the , which prevents successful molting and leads to larval death during developmental transitions. The mechanism of juvenile hormone analogs like involves binding to specific receptors in the insect's endocrine system, which disrupts the normal hormonal balance required for ; this causes larvae to pupate prematurely or form defective pupae that fail to emerge as adults. exhibits persistence in aquatic environments for 1-5 months when formulated in slow-release matrices, such as briquets or granules, allowing sustained control in breeding sites, with an LC50 of approximately 0.1-1 ppb against larvae. Similarly, acts as a potent juvenile hormone mimic, interfering with reproductive and morphogenetic processes at even lower concentrations, often achieving near-complete inhibition of adult emergence at doses below 0.01 ppb. In contrast, targets the chitin synthetase, halting development and causing lethal deformities during molting, with an LC50 around 0.006 ppm for darlingi larvae. Commercial products based on these IGRs are commonly deployed in urban and semi-urban settings to target habitats. Altosid, containing , is applied as granules or briquets to standing water bodies, providing up to 30-150 days of residual activity depending on the formulation. NyGuard, formulated with , is used in spray or granule form for treating catch basins and systems, effectively suppressing and populations in urban catch basins for 48-50 weeks at appropriate application rates. These products are integral to source reduction strategies in areas prone to vector-borne diseases like dengue and . Advancements in IGR formulations have focused on reducing environmental persistence to further minimize risks in aquatic ecosystems, including the development of microencapsulated or biodegradable carriers that maintain while accelerating degradation in and water. These updates enhance the of IGR use in , aligning with global efforts to balance effectiveness against ecological concerns.

Organophosphates and Pyrethroids

Organophosphates, such as temephos (commonly known as Abate), function as acute neurotoxins by irreversibly inhibiting the enzyme in larvae, which prevents the breakdown of the neurotransmitter acetylcholine and leads to overstimulation of the , resulting in and death. This mechanism targets the system essential for larval nerve impulse transmission, making organophosphates highly effective against early larvae in aquatic breeding sites. Temephos is typically applied at concentrations of 0.5-1 ppm to achieve rapid larval mortality, with field studies demonstrating near-complete elimination of susceptible populations within hours of exposure. As of 2025, resistance to temephos has been reported in over 50% of populations in dengue-endemic regions in and . The environmental persistence of temephos is relatively short, with a in ranging from approximately 2 to 7 days under typical field conditions influenced by factors like , , and , allowing for targeted application without prolonged residue accumulation. Historically, temephos emerged in the 1970s as a key replacement for in mosquito vector control programs, particularly for and dengue prevention, due to its lower environmental persistence and effectiveness against DDT-resistant strains. Today, its use is largely reserved for emergency outbreaks of vector-borne diseases, as widespread resistance—driven by enhanced detoxification enzymes like esterases—has reduced its reliability in routine applications. Pyrethroids, including and resmethrin, operate by modulating voltage-gated sodium channels in the , prolonging their open state to cause repetitive neuronal firing, hyperexcitation, and eventual ; however, due to their rapid degradation in (typically lasting only hours to days via and photolysis), they are less commonly used as larvicides and are primarily applied for adult . These compounds exhibit high potency against larvae at low doses, often in the range of , due to their lipophilic nature that facilitates rapid penetration through the larval , but their short residual activity limits them to immediate, localized treatments rather than sustained control. Studies as of 2025 highlight the use of rotations or co-applications of organophosphates and pyrethroids with microbial agents to mitigate resistance development and restore efficacy in resistant populations. Despite their utility, both classes pose risks to non-target aquatic organisms; for instance, permethrin's 96-hour LC50 for is 5.4 ppb, highlighting to at concentrations far below those used for mosquito control. In contrast to insect growth regulators that disrupt development over time, these agents provide swift knockdown effects suited for urgent vector suppression.

Emerging Methods

Acoustic Larvicides

Acoustic larvicides represent an emerging non-chemical approach to , utilizing ultrasonic sound waves to target and eliminate larvae in aquatic habitats. These devices generate acoustic energy that resonates with the air-filled dorsal tracheal trunks within the larvae, inducing violent vibrations that rupture the tracheal membranes and expel gas into the , ultimately causing or severe physiological disruption. This mechanism operates effectively across ultrasonic frequencies of 18–30 kHz, with pulsed exposures tailored to larval instars, and is particularly suited for species like and spp., which possess resonant air structures vulnerable to such disruption. Unlike traditional chemical agents, acoustic methods avoid environmental contamination and pose minimal risk to non-target aquatic organisms, such as copepods. Key devices include the Larvasonic SD-Mini, a compact, battery-powered emitter developed in the 2010s by New Mountain Innovations, designed for deployment in small water containers like dispensers or artificial breeding sites. Field and trials have demonstrated high efficacy, with the device achieving 100% mortality of first- and second-instar A. aegypti larvae at distances up to 60 cm after 180 seconds of exposure in controlled settings, and over 95% larval reduction in outdoor environments such as ditches and tire storage areas. Similarly, bucket tests against larvae yielded greater than 97% control, highlighting rapid action within hours to days depending on exposure duration and water conditions. Recent advancements focus on enhancing practicality for remote and urban applications, including integration with to enable autonomous operation with minimal maintenance, as seen in devices like the Sirenix system that pulse acoustic energy periodically. A 2020 field study published on evaluated the Larvasonic device in diverse artificial water containers, confirming its utility against young A. aegypti instars in vegetable gardens and similar sites, with no observed mortality in non-target species. These developments emphasize frequency-sweeping techniques to address varying larval sizes, achieving significant population declines within one to two weeks in treated habitats. Despite these strengths, acoustic larvicides have limitations, including a restricted confined to small water volumes, such as those under 100 liters, where attenuation occurs rapidly with depth, turbidity, or biofouling. The technology specifically targets larval stages and has no effect on eggs or adult mosquitoes, necessitating complementary strategies for comprehensive .

Botanical and Nanotech Approaches

Botanical larvicides derive from plant extracts and offer eco-friendly alternatives to synthetic chemicals by targeting mosquito larval development through natural compounds. Neem oil, extracted from the seeds of Azadirachta indica, contains azadirachtin as its primary active ingredient, which disrupts the ecdysone hormone pathway essential for insect molting and metamorphosis. This interference leads to larval mortality without significant accumulation in the environment. Studies have reported LC50 values ranging from 50-700 ppm for neem oil formulations against Aedes aegypti larvae, achieving high mortality rates under laboratory conditions. Other plants, such as catnip (Nepeta cataria), contribute terpenoids like nepetalactones that exhibit larvicidal and repellent effects against mosquitoes; essential oils from catnip have shown larvicidal activity against Aedes aegypti larvae in laboratory tests. Nanotechnology enhances the potency and delivery of botanical larvicides by improving and reducing dosage requirements. Silver nanoparticles (AgNPs) synthesized using plant extracts, such as those from marigold ( officinalis) or holy basil (), combine the antimicrobial properties of silver with plant-derived toxins to target larvae effectively. Green synthesis methods, which avoid harsh chemicals, advanced in 2025 research demonstrated LC50 values of 126-261 ppm against fourth-instar larvae while minimizing environmental toxicity. These AgNPs penetrate larval cuticles more readily than bulk extracts, amplifying disruption of cellular processes like respiration and enzyme activity. Recent developments in nanoemulsions facilitate controlled release of essential oils, extending their larvicidal duration in field applications. Formulations from 2024-2025 incorporate oils into stable nanoscale droplets, enhancing solubility and stability against evaporation or degradation, with a 2025 review emphasizing prolonged activity against Aedes aegypti. Essential oils from oregano (Origanum vulgare) and catnip provide dual benefits, offering antibacterial activity against pathogens like Pseudomonas syringae alongside mosquito control, as shown in evaluations of their volatile metabolites. For instance, copper-based ovitraps tested in 2016 field trials in Indonesia reduced Aedes egg-laying and larval survival by releasing copper ions that inhibit development; more recent studies on copper oxide nanoparticles (CuO NPs), such as green-synthesized formulations from 2023, have confirmed their larvicidal efficacy against mosquito larvae with low environmental impact (e.g., LC50 around 20-50 ppm).

Application and Deployment

Delivery Techniques

Larvicides are formulated in various physical forms to facilitate targeted application and ensure contact with larvae in aquatic habitats. Granular formulations, such as (Bti) pellets, are designed to disperse across water surfaces upon application and gradually sink to reach submerged larvae, providing effective coverage in shallow or vegetated waters. Liquid formulations are commonly used for insect growth regulators (IGRs) like , allowing for spraying that enables even distribution over larger surface areas. Briquettes offer a slow-release mechanism, particularly for , where the solid matrix dissolves gradually over weeks, maintaining consistent levels in standing water. Application methods vary by scale and site accessibility to achieve uniform distribution and minimize drift. For small-scale sites such as containers or ditches, hand application of granules, tablets, or briquettes allows precise placement directly into breeding sites. Low-volume spraying is employed for chemical larvicides, applying droplets directly to surfaces, suitable for treating accessible wetlands or urban water bodies. Aerial delivery via drones or helicopters has gained prominence, especially in 2025 U.S. programs targeting hard-to-reach waters in forested or vegetated areas, where granules or s are dropped to penetrate dense canopies. Key factors influencing delivery include dosage rates and application timing to optimize efficacy while conserving resources. Biological larvicides like Bti are typically applied at rates of 5-10 kg/ha, adjusted for water depth and larval stage to ensure sufficient toxin exposure without excess. Timing is determined through larval monitoring via methods such as dip sampling, enabling treatments when populations exceed threshold levels, often during peak breeding periods. Innovations enhance delivery precision and longevity. Auto-dispersing devices, such as the Larvanator ALD-365 (introduced in 2016), attach to container lids like catch basins and automatically release granules at set intervals, ensuring sustained larvicide presence in urban water holders without manual intervention. Nanoencapsulation techniques, advanced in 2024, involve entrapping active ingredients in nanoparticles to achieve prolonged release, improving stability and reducing reapplication frequency in challenging environments.

Habitat Targeting Strategies

Habitat targeting strategies for larvicide application prioritize the identification and treatment of larval breeding sites, particularly in aquatic environments where larvae develop. Common targets include stagnant water bodies such as discarded tires, roadside ditches, urban containers, and natural ponds, which serve as primary breeding grounds for vectors like and species. Source reduction—through drainage, filling, or covering these sites—is often combined with larvicide treatments to eliminate or suppress larval populations, as recommended by the for supplementary in areas with accessible habitats. Strategies differ markedly between urban and rural settings to address varying distributions. In urban areas, where mosquitoes predominate, efforts focus on man-made containers such as jars, flower pots, and tires that accumulate rainwater, enabling targeted larvicide applications in densely populated zones. Conversely, rural malaria-endemic regions emphasize treatments in larger, natural habitats like rice fields, irrigation channels, and temporary pools formed by seasonal flooding, where vectors thrive. Effective targeting relies on robust monitoring protocols to locate and prioritize high-risk sites. Larval surveys employ to sample water bodies—taking 5-20 dips per site depending on size and microhabitat variety—to detect larvae in puddles, ditches, ponds, tree holes, and artificial containers like catch basins. Geographic Information Systems (GIS) mapping integrates field data with to identify larval hotspots, enabling of breeding site distribution and risk stratification for both and dengue vectors. Seasonal strategies in tropical regions often involve pre-monsoon interventions, such as early larvicide deployment and clearing before heavy rains create new breeding sites. Integrated vector management (IVM) approaches enhance targeting by combining larviciding with environmental clean-up efforts, such as community-led waste removal and improved water infrastructure to reduce breeding opportunities. Guidelines from the (2019) emphasize strategies using epidemiological, entomological, and environmental data—including rainfall and temperature patterns—to tailor site selection and treatment timing. These frameworks promote multi-sectoral collaboration for sustainable management, particularly in response to shifting vector ecologies due to climate variability.

Efficacy and Impacts

Effectiveness and Resistance Issues

Larvicides demonstrate high effectiveness in field applications, particularly in reducing mosquito larval populations in the short term. Studies in have shown that (Bti) formulations can achieve 96-100% larval mortality within 24 hours when applied at recommended rates, significantly lowering vector densities in malaria-endemic areas. Aerial delivery methods using Bti have also proven effective, with programs reducing adult mosquito abundance by 63.5-77.4% relative to baseline levels in treated sites. Despite these successes, resistance to larvicides poses a growing challenge, especially for chemical agents. In Aedes aegypti, resistance to temephos, an organophosphate, frequently arises from genetic mutations altering the acetylcholinesterase (AChE) enzyme, which reduces the insecticide's binding affinity and efficacy. For biological agents like Bti, resistance remains rare in natural populations, but laboratory selections have induced 2-3-fold tolerance after multiple generations, highlighting the potential for evolutionary adaptation under intensive pressure. Effective resistance management strategies emphasize proactive measures to preserve larvicide utility. Rotating chemical classes, such as alternating organophosphates with insect growth regulators (IGRs), disrupts selection pressure and slows resistance evolution in vector populations. Routine monitoring through (WHO) susceptibility bioassays enables early detection, guiding adjustments in control programs. Additionally, combination products integrating multiple active ingredients or modes of action can delay resistance onset by requiring simultaneous mutations for survival. Efficacy in field trials is commonly quantified using Abbott's formula to account for natural mortality in controls: % control=(1−TC)×100\% \text{ control} = \left(1 - \frac{T}{C}\right) \times 100 where TT represents the proportion of mortality in the treated group and CC in the untreated control. This correction provides a standardized metric for comparing larvicide performance across diverse environmental conditions.

Environmental and Safety Considerations

Larvicides, while effective against mosquito larvae, pose varying risks to non-target organisms depending on their chemical or biological nature. Biological larvicides such as Bacillus thuringiensis israelensis (Bti) exhibit low toxicity to non-target species, including honey bees and fish, with studies showing no significant adverse effects on aquatic invertebrates or vertebrates when applied at recommended rates. In contrast, chemical larvicides like temephos demonstrate high toxicity to crustaceans, with median lethal concentrations (LC50) as low as 0.005 mg/L for species such as pink shrimp, potentially leading to unintended mortality in aquatic ecosystems. Human safety profiles for approved larvicides are generally favorable, characterized by low dermal absorption and minimal through skin contact. The U.S. Environmental Protection Agency (EPA) mandates (PPE), such as gloves and long-sleeved clothing, on product labels to further reduce exposure risks during application. Toxicological assessments by the EPA, including reregistration decisions up to , indicate that registered larvicides, including organophosphates and insect growth regulators, lack evidence of carcinogenicity in humans at typical exposure levels. Broader ecological concerns arise from the persistent use of certain larvicides, particularly insect growth regulators (IGRs) like , which exhibit low potential in sediments and aquatic organisms due to rapid degradation, though concerns about long-term ecological effects persist. In habitats, larvicide applications have been linked to disruptions in food webs, such as reduced populations of chironomid larvae that serve as prey for higher trophic levels, including and amphibians. Studies from 2019 and 2025 highlight associated with larvicide overuse, noting declines in non-target diversity and shifts in structure in treated aquatic systems. To mitigate these risks, integrated vector management (IVM) approaches emphasize minimizing larvicide applications through and source reduction, combined with the establishment of buffer zones around sensitive habitats to limit drift and exposure. Biopesticides, such as Bti and plant-derived formulations, are preferentially recommended in ecologically sensitive areas due to their targeted action and lower persistence, reducing overall environmental impact while maintaining control efficacy.

Regulation and Future Outlook

Regulatory Frameworks

At the global level, the (WHO) oversees the prequalification of products to ensure their quality, safety, and efficacy for public health use, including larvicides such as those based on Bacillus thuringiensis subsp. israelensis (Bti). Bti formulations, like VectoBac GR and VectoBac WG, received WHO prequalification in 2018 following evaluations under prior guidelines. The former WHO Pesticide Evaluation Scheme (WHOPES), now integrated into the prequalification program, established standardized testing protocols for mosquito larvicides, including laboratory and field efficacy assessments for bacterial agents and insect growth regulators. In the United States, the Environmental Protection Agency (EPA) regulates larvicides under the Federal , , and Act (FIFRA), requiring registration based on risk assessments for human health and environmental impacts. For instance, , an used as a larvicide, underwent registration review with a preliminary work plan issued in 2020 and an interim decision in 2021, confirming its continued approval with mitigation measures. Emerging nanotechnology-based larvicides fall under FIFRA and the Toxic Substances Control Act (TSCA), with EPA permitting limited production via consent orders or significant new use rules as of August 2025 to address potential novel risks. Within the , the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) regulation and the Persistent Organic Pollutants (POPs) Regulation prohibit or severely restrict persistent organic compounds, including certain legacy pesticides that could be used as larvicides, to protect and the environment. Regulatory emphasis is placed on low-toxicity biological larvicides, such as Bti, which are recommended for under the Biocidal Products Regulation (BPR) due to their targeted action and minimal non-target effects. In developing countries, national programs often align with WHO guidelines while implementing localized controls; for example, India's National Vector Borne Disease Control Programme (NVBDCP) approves and deploys temephos as a primary larvicide for , with usage dating back to the 1980s and ongoing susceptibility monitoring. Import and export of hazardous pesticides, including certain larvicides, are further governed by the , which requires prior for trade in Annex III-listed substances to prevent unwanted introductions of restricted chemicals.

Innovations and Challenges

Recent innovations in larvicide technology include of to enhance its insecticidal efficacy against larvae. CRISPR-based gene editing has been applied to strains, including those producing serovar israelensis (Bti) toxins, to improve expression and specificity, potentially overcoming limitations in current formulations. For instance, edited strains show promise in targeting dipteran larvae more effectively while maintaining environmental safety. Additionally, (AI) tools are advancing predictive mapping of larval hotspots by analyzing , environmental data, and surveillance inputs to identify breeding sites with high accuracy. These AI models, such as neural networks trained on local weather and variables, enable proactive larvicide deployment, reducing reactive interventions. Acoustic larvicides, which use sound waves to disrupt larval development, represent another non-chemical approach, with devices like the LarvaSonic targeting all larval stages without residues. is emerging in larvicide delivery, with silver and metal oxide nanoparticles synthesized from plant extracts demonstrating potent larvicidal activity against species. Key challenges persist in advancing larvicide effectiveness, particularly as alters mosquito breeding dynamics. Rising temperatures and altered precipitation patterns are expanding suitable s for vectors like , complicating larvicide application in newly vulnerable regions. Funding shortages in low-income areas hinder widespread adoption, with insufficient resources for , habitat identification, and sustained programs exacerbating gaps. Moreover, the need for robust resistance surveillance is critical, as repeated exposure to agents like Bti can select for tolerant mosquito populations, potentially reducing long-term efficacy. Looking ahead, the larvicide market is projected to reach approximately USD 1.26 billion by 2030, driven by demand for sustainable solutions. The World Health Organization's Global Vector Control Response 2017–2030 sets ambitious targets, including reducing vector-borne disease mortality by at least 75% and incidence by 60% through enhanced coverage and integrated strategies. Scaling sustainable biopesticides, such as microbial and plant-based formulations, is essential for meeting these goals while minimizing ecological impacts. Current research trends from 2023 to 2025 emphasize hybrid plant-nanotechnology approaches, where nanoparticles derived from botanical extracts enhance larvicide potency and stability. These green-synthesized materials, including silver nanoparticles from or , exhibit strong larvicidal effects against dengue vectors with lower toxicity profiles. Integrated vector management (IVM) incorporating climate modeling is also gaining traction, using predictive simulations to adapt larvicide strategies to shifting environmental conditions.

References

  1. https://www.cdc.gov/mosquitoes/mosquito-control/larvicides.html
  2. https://www.cdc.gov/mosquitoes/mosquito-borne-diseases/index.html
  3. https://pmc.ncbi.nlm.nih.gov/articles/PMC6483557/
  4. https://pmc.ncbi.nlm.nih.gov/articles/PMC11618383/
  5. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/larvicide
  6. https://irac-online.org/documents/mosquito-larvicide-moa-poster/
  7. https://www.swmosquito.org/pesticides-modes-of-action
  8. https://placermosquito.org/wp-content/uploads/2020/10/Aerial-Application-Flyer-2020.pdf
  9. https://www.monroecounty.gov/files/health/health-Larvicides.pdf
  10. https://pmc.ncbi.nlm.nih.gov/articles/PMC3401688/
  11. https://taylorandfrancis.com/knowledge/Medicine_and_healthcare/Pharmaceutical_medicine/Paris_Green/
  12. https://www.malariasite.com/history-control/
  13. https://www.ncbi.nlm.nih.gov/books/NBK1724/
  14. https://hal.science/hal-00886454/document
  15. https://pmc.ncbi.nlm.nih.gov/articles/PMC4667572/
  16. https://tomvogl.github.io/malaria_cfksv.pdf
  17. https://www.epa.gov/ingredients-used-pesticide-products/ddt-brief-history-and-status
  18. https://www.epa.gov/archive/epa/aboutepa/ddt-regulatory-history-brief-survey-1975.html
  19. https://www.who.int/docs/default-source/wash-documents/wash-chemicals/temephos-background-document.pdf?sfvrsn=c34fda71_4
  20. https://www.sciencedirect.com/topics/pharmacology-toxicology-and-pharmaceutical-science/methoprene
  21. https://www.biodiversitylibrary.org/content/part/JAMCA/MN_V44_N4_P502-505.pdf
  22. https://www.who.int/publications/i/item/WHO-CDS-CPE-PVC-2004.10
  23. https://www.nyc.gov/assets/doh/downloads/pdf/wnv/2025/wnvplan2025.pdf
  24. https://www.marketsandata.com/industry-reports/larvicides-market
  25. https://www.nature.com/articles/s41598-020-59321-8
  26. https://pmc.ncbi.nlm.nih.gov/articles/PMC8402332/
  27. https://pmc.ncbi.nlm.nih.gov/articles/PMC6311009/
  28. https://www.sciencedirect.com/science/article/pii/S2666515821000202
  29. https://doh.wa.gov/community-and-environment/pests/mosquitoes/bti
  30. https://parasitesandvectors.biomedcentral.com/articles/10.1186/s13071-018-3009-z
  31. https://pubmed.ncbi.nlm.nih.gov/12170930/
  32. https://www.epa.gov/mosquitocontrol/bti-mosquito-control
  33. https://pmc.ncbi.nlm.nih.gov/articles/PMC12506322/
  34. https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0332621
  35. https://pmc.ncbi.nlm.nih.gov/articles/PMC5715920/
  36. https://www.mdpi.com/2309-608X/9/7/746
  37. https://pmc.ncbi.nlm.nih.gov/articles/PMC3051916/
  38. https://www.frontiersin.org/journals/microbiology/articles/10.3389/fmicb.2017.01337/full
  39. https://www.ars.usda.gov/news-events/news/research-news/2003/newly-patented-virus-could-help-control-disease-carrying-mosquitoes/
  40. https://www.researchgate.net/publication/6729299_Prospects_for_the_Mosquito_Baculovirus_Cuninpv_as_a_Tool_for_Mosquito_Control
  41. https://emerginginvestigators.org/articles/23-224/pdf
  42. https://pmc.ncbi.nlm.nih.gov/articles/PMC9993401/
  43. https://www.mdpi.com/2075-4450/15/1/70
  44. https://biocontrol.entomology.cornell.edu/pathogens/lagenidium.php
  45. https://academic.oup.com/jme/article-abstract/19/3/255/2219975
  46. https://pubmed.ncbi.nlm.nih.gov/17334944/
  47. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/insect-growth-regulator
  48. https://pmc.ncbi.nlm.nih.gov/articles/PMC7137934/
  49. http://extoxnet.orst.edu/pips/methopre.htm
  50. https://www.canada.ca/en/health-canada/services/consumer-product-safety/reports-publications/pesticides-pest-management/fact-sheets-other-resources/methoprene-mosquito-control-programs.html
  51. https://ojs.jresearchbiology.com/index.php/jrb/article/view/209
  52. https://www.zoecon.com/all-products/premise/altosid-pro-g
  53. https://pubmed.ncbi.nlm.nih.gov/33600587/
  54. https://aaes.uada.edu/news/mcdermott-new-larvacide/
  55. https://www.sciencedirect.com/science/article/abs/pii/S1385894724008921
  56. https://pmc.ncbi.nlm.nih.gov/articles/PMC6791832/
  57. https://www.researchgate.net/publication/6483215_Laboratory_bioefficacy_of_CREEK_10G_temephos_against_Aedes_Stegomyia_aegypti_Linnaeus_larvae
  58. https://pmc.ncbi.nlm.nih.gov/articles/PMC4570708/
  59. https://parasitesandvectors.biomedcentral.com/articles/10.1186/s13071-024-06624-8
  60. https://pmc.ncbi.nlm.nih.gov/articles/PMC3062537/
  61. https://fmel.ifas.ufl.edu/media/fmelifasufledu/7-15-2018-white-paper.pdf
  62. https://parasitesandvectors.biomedcentral.com/articles/10.1186/s13071-020-04284-y
  63. https://www.who.int/publications/i/item/sea-cd-334
  64. https://www.inchem.org/documents/ehc/ehc/ehc94.htm
  65. https://www.epa.gov/mosquitocontrol/pesticides-used-control-adult-mosquitoes
  66. https://onlinelibrary.wiley.com/doi/abs/10.1002/etc.5620080504
  67. https://parasitesandvectors.biomedcentral.com/articles/10.1186/s13071-025-07010-8
  68. https://archive.epa.gov/pesticides/chemicalsearch/chemical/foia/web/pdf/109701/109701-021.pdf
  69. https://www.mdpi.com/2076-3417/10/10/3546
  70. https://pubmed.ncbi.nlm.nih.gov/28206869/
  71. https://pubmed.ncbi.nlm.nih.gov/26675460/
  72. https://newmountain.com/pages/technology
  73. https://www.researchgate.net/publication/341537923_Ultrasonic_Technology_Applied_against_Mosquito_Larvae
  74. https://www.science.gov/topicpages/n/neem%2Blimonoids%2Bazadirachtin
  75. https://pmc.ncbi.nlm.nih.gov/articles/PMC7218012/
  76. https://onlinelibrary.wiley.com/doi/full/10.1111/jvec.12170
  77. https://www.nature.com/articles/s41598-025-12959-8
  78. https://www.beilstein-journals.org/bjnano/articles/16/132
  79. https://pmc.ncbi.nlm.nih.gov/articles/PMC9995836/
  80. https://pmc.ncbi.nlm.nih.gov/articles/PMC4940706/
  81. https://www.dipterajournal.com/pdf/2023/vol10issue5/PartA/10-5-2-701.pdf
  82. https://pmc.ncbi.nlm.nih.gov/articles/PMC2877411/
  83. https://www.clarke.com/mosquito-products/larvicides/altosid-larvicide/
  84. https://www.contracostamosquito.com/files/2f9490c50/BMPforMosquitoControl_08_10.pdf
  85. https://placermosquito.org/what-we-do/drones/
  86. https://www.valentbiosciences.com/publichealth/wp-content/uploads/sites/4/2017/03/vectomax-sup-sup-cg-technical-use-bulletin.pdf
  87. https://connorspestpros.com/mosquito-control-using-larvicide-how-it-works/
  88. https://www.pctonline.com/news/mosquito-max-larvanator-al-365/
  89. https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0293124
  90. https://www.cdc.gov/malaria/php/public-health-strategy/larval-management.html
  91. https://iris.who.int/bitstream/handle/10665/85379/9789241505604_eng.pdf
  92. https://www.nature.com/articles/s41598-021-96362-z
  93. https://www.ecdc.europa.eu/sites/default/files/documents/Vector-sampling-field-protocol-2018.pdf
  94. https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0236607
  95. https://skuaspestcontrol.com/pest-blogs/top-6-ways-to-kill-mosquito-larvae-in-standing-water-expert-guide-for-delhi-homes
  96. https://iris.paho.org/bitstream/handle/10665.2/51759/Manejo%2520Integrado_ENG_FINAL3.pdf?sequence=1&isAllowed=y
  97. https://www.sciencedirect.com/science/article/pii/S2667114X22000152
  98. https://pmc.ncbi.nlm.nih.gov/articles/PMC7580761/
  99. https://smujo.id/biodiv/article/view/22990
  100. https://pmc.ncbi.nlm.nih.gov/articles/PMC10458291/
  101. https://parasitesandvectors.biomedcentral.com/articles/10.1186/s13071-022-05310-x
  102. https://www.naccho.org/uploads/resource-hub-images/WHO_managing-insecticide-resistance.pdf
  103. https://journals.plos.org/plosntds/article?id=10.1371/journal.pntd.0005043
  104. https://www.biodiversitylibrary.org/content/part/JAMCA/JAMCA_V03_N2_P302-303.pdf
  105. https://npic.orst.edu/factsheets/btgen.html
  106. http://extoxnet.orst.edu/pips/temephos.htm
  107. https://nepis.epa.gov/Exe/ZyPURL.cgi?Dockey=200007UJ.TXT
  108. https://www.epa.gov/sites/default/files/2016-11/documents/acute-dermal-toxicity-pesticide-formulations_0.pdf
  109. https://downloads.regulations.gov/EPA-HQ-OPP-2008-0444-0003/content.pdf
  110. https://www.sciencedirect.com/science/article/pii/S014765131630553X
  111. https://pmc.ncbi.nlm.nih.gov/articles/PMC12239451/
  112. https://www.sciencedirect.com/science/article/pii/S0048969719324118
  113. https://www.sciencedirect.com/science/article/pii/S0048969724082494
  114. https://www.cdc.gov/mosquitoes/php/toolkit/integrated-mosquito-management-1.html
  115. https://www.msmosquito.org/files/c7c06cbed/MSMVCD%2BDPEIR_06%2BEcoHealth_AUG2015.pdf
  116. https://pmc.ncbi.nlm.nih.gov/articles/PMC8878986/
  117. https://extranet.who.int/prequal/vector-control-products
  118. https://extranet.who.int/prequal/vector-control-products/vectobac-gr
  119. https://www.who.int/publications/i/item/WHO-CDS-WHOPES-GCDPP-2005.13
  120. https://www.epa.gov/pesticide-registration
  121. https://www.federalregister.gov/documents/2020/02/04/2020-02098/pesticide-registration-review-pesticide-dockets-opened-for-review-and-comment-notice-of-availability
  122. https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/control-nanoscale-materials-under
  123. https://echa.europa.eu/understanding-pops
  124. https://www.ecdc.europa.eu/sites/default/files/documents/Vector-control-Aedes-aegypti-Aedes-albopictus.pdf
  125. https://journals.lww.com/jvbd/fulltext/2025/01000/susceptibility_of_temephos_against_aedes_aegypti.17.aspx
  126. https://www.pic.int/implementation/pesticides
  127. https://bioscipublisher.com/index.php/bm/article/html/3930/
  128. https://www.mdpi.com/journal/toxins/special_issues/Bt_toxins
  129. https://phys.org/news/2024-09-geoinformatics-ai-aim-mosquitoes.html
  130. https://journals.plos.org/ploscompbiol/article?id=10.1371/journal.pcbi.1009467
  131. https://www.researchgate.net/figure/Larvasonic-SD-Mini-Acoustic-Larvicide-device_fig1_313817214
  132. https://pmc.ncbi.nlm.nih.gov/articles/PMC7047929/
  133. https://journals.lww.com/md-journal/fulltext/2024/07190/adapting_to_the_shifting_landscape__implications.65.aspx
  134. https://pmc.ncbi.nlm.nih.gov/articles/PMC7923449/
  135. https://www.sciencedirect.com/science/article/pii/S2589004225007825
  136. https://www.mordorintelligence.com/industry-reports/larvicides-market
  137. https://www.thelancet.com/journals/lancet/article/PIIS0140-6736%2817%2931376-4/fulltext
  138. https://pmc.ncbi.nlm.nih.gov/articles/PMC12520082/
  139. https://pubmed.ncbi.nlm.nih.gov/37026223/
  140. https://pmc.ncbi.nlm.nih.gov/articles/PMC4027270/
  141. https://www.sciencedirect.com/science/article/abs/pii/S0048969720365992
Add your contribution
Related Hubs
User Avatar
No comments yet.