Dromaeosaurus
Dromaeosaurus
Main page
2165680

Dromaeosaurus

logo
Community Hub0 subscribers
Read side by side
Dromaeosaurus
View on Wikipedia
from Wikipedia

Dromaeosaurus
Temporal range: Late Cretaceous (Campanian to Maastrichtian), 83.6–68 Ma
[1] Possible Late Maastrichtian record[2]
Reconstructed skeleton, Canadian Museum of Nature
Scientific classification Edit this classification
Kingdom: Animalia
Phylum: Chordata
Class: Reptilia
Clade: Dinosauria
Clade: Saurischia
Clade: Theropoda
Family: †Dromaeosauridae
Clade: †Eudromaeosauria
Subfamily: †Dromaeosaurinae
Genus: †Dromaeosaurus
Matthew & Brown, 1922
Type species
†Dromaeosaurus albertensis
Matthew & Brown, 1922

Dromaeosaurus (/ˌdroʊmiəˈsɔːrəs, -mi.oʊ-/;[3] lit. 'running lizard') is a genus of dromaeosaurid theropod dinosaur that lived during the Late Cretaceous period (middle to late Campanian and Maastrichtian), sometime between 80 and 69 million years ago, in the Canadian province of Alberta and the western United States. The type species is Dromaeosaurus albertensis, which was described by William Diller Matthew and Barnum Brown in 1922. Its fossils were unearthed in the Hell Creek Formation, Horseshoe Canyon Formation and Dinosaur Park Formation. Teeth attributed to this genus have been found in the Prince Creek Formation. Dromaeosaurus is the type genus of both Dromaeosauridae and Dromaeosaurinae, which include many genera with similar characteristics to Dromaeosaurus such as possibly its closest relative Dakotaraptor. Dromaeosaurus was heavily built, more so than other dromaeosaurids that are similar in size, like Velociraptor.

Discovery and naming

[edit]

Despite receiving widespread attention in popular books on dinosaurs, and the usage of a complete mounted skeleton cast in museums throughout the world, Dromaeosaurus is poorly known from actual fossils.[4] The preparation of the popular cast by the Tyrrell Museum was only made possible by knowledge gained from other dromaeosaurids that have been discovered more recently.

1922 diagram of the holotype skull
D. albertensis skull cast exhibited the University of Copenhagen Geological Museum
Cast at the Royal Tyrrell Museum

The first known Dromaeosaurus remains were discovered by paleontologist Barnum Brown during a 1914 expedition to Red Deer River on behalf of the American Museum of Natural History.[5] The area where these bones were collected is now part of Dinosaur Provincial Park in Alberta, Canada.[6] The find, holotype AMNH 5356, consisted of a partial skull 24 cm (9+1⁄2 in) in length, a mandible, two hyoids, a first metacarpal and some foot bones. The skull lacked most of the top of the snout.[6][5] Several other skull fragments, and about thirty isolated teeth, are known from subsequent discoveries in Alberta and Montana.[6]

In 1922 William Diller Matthew and Brown named and described the type species of Dromaeosaurus: Dromaeosaurus albertensis. The generic name is derived from the Greek δρομεύς (dromeus) meaning 'runner' and σαύρος (sauros) meaning 'lizard'. The specific name, "albertensis", refers to Alberta.

Another seven species of Dromaeosaurus were named: Dromaeosaurus laevifrons (Cope 1876) Matthew & Brown 1922; Dromaeosaurus cristatus (Cope 1876) Matthew & Brown 1922 (Troodon); Dromaeosaurus? gracilis (Marsh 1888) Matthew & Brown 1922; Dromaeosaurus explanatus (Cope 1876) Kuhn 1939; Dromaeosaurus minutus (Marsh 1892) Russell 1972 (an alvarezsaurid); Dromaeosaurus falculus (Cope 1876) Olshevsky 1979 and Dromaeosaurus mongoliensis (Barsbold 1983) Paul 1988 (Adasaurus). Most of them were based on fragmentary material, some belonging to other genera, and far less complete than that of Dromaeosaurus albertensis, and those that haven't been reclassified are considered nomina dubia today.[6] Nevertheless, it has grown apparent that Dromaeosaurus albertensis is even rarer in its habitat than other small theropods, although it was the first dromaeosaurid of which reasonably good cranial material was described.[6] The genus Chirostenotes was considered to be synonymous with Dromaeosaurus at one point in time.[7]

Description

[edit]
Artistic restoration of D. albertensis

Dromaeosaurus was a medium-sized carnivore, about 2 m (6 ft 7 in) in length and 16 kg (35 lb) in body mass.[8][9] Its mouth was full of sharp teeth, and it probably would have had a sharply curved "sickle claw" on each foot. It lived during the Campanian stage of the Late Cretaceous. However, some fragmentary remains such as teeth that may belong to this genus have been found from the late Maastrichtian age Hell Creek and Lance Formations, dating to 66 million years ago.[10] Teeth have also been found in the Aguja Formation.

Dromaeosaurus had a relatively robust skull with a deep snout. Its teeth were rather large and were shaped like a curved cone with a coat of enamel covering the crown.[11] It had only nine teeth in each maxilla.[6] Dromaeosaurus also had a vein at the back of the head, the vena capitis dorsalis, that drained the front neck muscles through two long canals running to the posterior surface of the brain.[12] The Meckelian groove of Dromaeosaurus is rather shallow and does not have much depth.[13]

Classification

[edit]

Matthew and Brown originally placed Dromaeosaurus to its own subfamily, the Dromaeosaurinae, within the "Deinodontidae" (now known as Tyrannosauridae) based on some similarities in the general proportions of the skull.[5] In 1969, John H. Ostrom recognized that Dromaeosaurus shared many features with Velociraptor and the newly discovered Deinonychus, and assigned these forms to a new family: Dromaeosauridae.[14] Since then, many new relatives of Dromaeosaurus have been found.

The exact relationships of Dromaeosaurus are somewhat unclear. Although its rugged build gives it a primitive appearance, it was actually a very specialized animal.[15] In an analysis of the clade Dromaeosaurinae, species such as Utahraptor, Achillobator and Yurgovuchia have been recovered.[16] The genus Dakotaraptor has been classified as the sister taxon to Dromaeosaurus,[17] but more recent analysis do not recover such a close relationship.

Below is a cladogram by Senter et al. in 2012. Dromaeosaurus is recovered as the sister taxon to Yurgovuchia, Utahraptor and Achillobator.[16]

Eudromaeosauria
Size of Dromaeosaurus (4) compared with other dromaeosaurs

The cladogram below follows a 2015 analysis by paleontologists Robert DePalma, David Burnham, Larry Martin, Peter Larson, and Robert Bakker, using updated data from the Theropod Working Group. In this analysis, Dromaeosaurus is classified as the sister taxon of Dakotaraptor.[17]

Eudromaeosauria

Paleobiology

[edit]
Conjectural sculpted foot of D. albertensis on display at the French National Museum of Natural History in Paris

Dromaeosaurus differs from most of its relatives in having a short, massive skull, a deep mandible, and robust teeth. The teeth tend to be more heavily worn than those of its relative Saurornitholestes, suggesting that its jaws were used for crushing and tearing rather than simply slicing through flesh. Therrien et al. (2005) estimated that Dromaeosaurus had a bite nearly three times as powerful as that of Velociraptor and suggested it relied more on its jaws than on the sickle claw to kill its prey.[18] In a study predominantly centered around Shuvuuia, Dromaeosaurus was compared to the former and also to Alioramus, in which both Dromaeosaurus and Alioramus were discovered to be diurnal predators.[19][20]

Feeding behavior

[edit]

Dromaeosaurus' feeding habits were also discovered to be typical of coelurosaurian theropods, with a characteristic "puncture and pull" feeding method. Studies of wear patterns on the teeth of this animal by Angelica Torices et al. in a study regarding theropod feeding habits indicate that dromaeosaurid teeth share similar wear patterns to those seen in the Tyrannosauridae and Troodontidae, respectively. However, micro-wear on the teeth indicated that Dromaeosaurus likely preferred larger prey items than the troodontids it shared their environment with. Such differentiations in its diet likely allowed the theropod to inhabit the same environment as its more distant maniraptoran relatives. The same study also indicated that both Dromaeosaurus and Saurornitholestes (also analyzed in the study) likely included bone in their diet and were better adapted to handle the stresses associated with attacking struggling prey while troodontids, equipped with weaker jaws, preyed on softer animals and prey items such as invertebrates and carrion. This feeding strategy and ability to handle struggling prey was also a feature that the theropod also shared with tyrannosaurids such as Gorgosaurus, which was also analyzed in said study alongside these smaller theropods.[21][22]

See also

[edit]

Footnotes

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Dromaeosaurus

View on Grokipedia
from Grokipedia
Dromaeosaurus is a genus of small, carnivorous dromaeosaurid theropod dinosaur that lived during the Late Cretaceous period in western North America.[1] The type and only widely recognized species is D. albertensis, a bipedal predator approximately 2 meters in length and weighing about 15 kilograms, characterized by a robust skull filled with sharp, backward-curving teeth and large, sickle-shaped claws on the second toe of each foot for slashing prey; other named species are now regarded as synonyms or invalid.[1][2] The genus was established in 1922 by paleontologists William D. Matthew and Barnum Brown, based on the holotype specimen AMNH 5356—a partial skull, lower jaws, and some associated skeletal elements—discovered by Brown in 1914 along the Red Deer River in Alberta, Canada.[3] This fossil came from the Dinosaur Park Formation, dating to the late middle Campanian stage around 76 to 74 million years ago, with additional fragmentary remains from younger formations extending its range into the early Maastrichtian, approximately 76 to 67 million years ago.[3][2] Initially classified within the tyrannosaurid family Deinodontidae due to its serrated teeth, Dromaeosaurus was later recognized as the eponymous member of Dromaeosauridae, a clade of feathered, bird-like theropods within Saurischia.[3][1] Fossils attributed to the genus have been recovered primarily from formations in Alberta, with possible material from Montana's Two Medicine Formation, indicating a distribution across what was then a coastal floodplain environment.[2] As an agile hunter, Dromaeosaurus likely employed its powerful jaws and foot claws to puncture and tear flesh from vertebrate prey, including smaller dinosaurs and possibly contributing to the downfall of larger animals through pack behavior, though direct evidence for gregariousness remains speculative.[1][2] Its heavily built cranium suggests a bite force up to three times stronger than that of the related Velociraptor, enabling it to crush bone and handle tougher hides.[2] The name "Dromaeosaurus" derives from Greek words meaning "running lizard," reflecting its inferred speed and predatory prowess, while "albertensis" honors the Canadian province of Alberta.[3] Despite its iconic status as the first named dromaeosaurid, the genus is known primarily from isolated bones and teeth, with ongoing research refining its phylogenetic position among other North American "raptors" like Saurornitholestes and Acheroraptor.[2]

Discovery and naming

Initial discovery and holotype

The first remains of Dromaeosaurus were discovered in 1914 by paleontologist Barnum Brown during an American Museum of Natural History expedition to the Red Deer River valley in Alberta, Canada. The fossils came from sediments of the Late Cretaceous Belly River Formation, now recognized as the Dinosaur Park Formation within the Belly River Group. Brown identified the material as representing a novel small theropod dinosaur distinct from known taxa like Ornitholestes, based on its cranial and pedal features. The holotype specimen, cataloged as AMNH 5356, comprises a partial skull—including fragments of the right maxilla, left lacrimal, left postorbital, left quadrate, and right articular—as well as portions of the lower jaw, two hyoids, a first metacarpal, and several pedal phalanges from the foot, notably the enlarged sickle claw of digit II.[4] This fragmentary but diagnostic material, measuring about 24 cm in skull length, provided the basis for recognizing Dromaeosaurus as a swift, carnivorous predator adapted for terrestrial hunting. In 1922, William Diller Matthew and Barnum Brown formally described and named the dinosaur as Dromaeosaurus albertensis in the Bulletin of the American Museum of Natural History, erecting it as the type genus of a new family, Dromaeosauridae, to accommodate its unique combination of traits such as the hypertrophied second pedal ungual and fenestrated skull. The generic name derives from Greek dromaio, meaning "runner," and sauros for "lizard," reflecting its inferred agile locomotion, while the specific epithet honors the province of Alberta.

Referred specimens and species

Several partial skeletons and isolated elements have been referred to Dromaeosaurus albertensis since the description of the holotype, primarily from the Late Cretaceous deposits of western North America. Notable among these is an isolated frontal bone (NMC 12349) from the Dinosaur Park Formation in Alberta, Canada, which shares morphological features such as the lack of a deep basin between the median suture and orbital rim with the holotype material.[5] A partial dentary from the same formation also exhibits compatible dental characteristics, including recurved teeth with fine serrations, supporting its referral.[5] Additionally, numerous isolated teeth from the Judith River Formation in Montana and the Two Medicine Formation in Montana have been attributed to Dromaeosaurus based on their compressed crowns and lingually curved carinae, though these assignments are tentative due to overlap with sympatric dromaeosaurids like Saurornitholestes.[4] The taxonomic history of Dromaeosaurus includes several proposed species beyond the type D. albertensis, but revisions in the late 20th century have invalidated them. For instance, D. minutus (originally described in 1892 and reassigned in 1972) was deemed a nomen dubium due to insufficient diagnostic material, likely representing an indeterminate theropod.[5] Today, D. albertensis remains the only valid species, with all other referrals consolidated under it.[5] The fragmentary nature of Dromaeosaurus fossils poses significant challenges for referrals, as no complete skeleton has been recovered, necessitating comparisons based on isolated cranial and dental elements. This reliance on partial material often leads to ambiguous assignments, particularly in formations like the Judith River and Two Medicine, where multiple small theropods coexisted. Recent studies have tentatively associated isolated teeth and pedal claws from Maastrichtian-aged sites in Montana and Saskatchewan with Dromaeosaurus, citing subtle differences in denticle density and curvature, but these referrals remain debated owing to potential overlap with genera like Saurornitholestes or undescribed taxa.[6][5]

Description

Size and general build

Dromaeosaurus albertensis was a medium-sized dromaeosaurid theropod, with estimates based on the holotype skull length of 24 cm indicating a total body length of approximately 2 meters (6.6 ft), a hip height of about 1 meter (3.3 ft), and a body mass of 15-16 kg.[4][7] This dinosaur exhibited a slender, bipedal body plan characteristic of advanced paravians, supported by elongated hindlimbs that emphasized agility over raw power. Its tail, extending up to 1 m, was stiffened by closely spaced chevrons and elongated prezygapophyses, aiding in balance and maneuverability during movement. Forelimbs were robust relative to body size, bearing three-fingered hands with curved, trenchant claws suited for grasping. The hindfoot featured an enlarged second pedal ungual, forming a sickle-shaped claw roughly 6 cm long, which contributed to its predatory adaptations.[4][5] Dromaeosaurus adopted a horizontal posture with the trunk parallel to the ground, a configuration facilitated by its long hindlimbs and reduced forelimbs. Limb proportions, including a relatively long tibia and metatarsus, suggest high agility, with estimated maximum speeds reaching up to 40 km/h based on comparative theropod ratios. Compared to other dromaeosaurids, it was smaller than Deinonychus antirrhopus (over 3 m long and 70 kg) but more robustly built than the similarly sized yet gracile Velociraptor mongoliensis.[4][8][5]

Skull, teeth, and limbs

The skull of Dromaeosaurus albertensis is robust and measures approximately 24 cm in length.[9] It features a high sagittal crest formed by the parietals and frontals, which likely anchored large jaw-closing muscles.[4] The cranium includes large fenestrae, such as the antorbital fenestra, which occupies a significant portion of the side of the skull, and the infratemporal fenestra, contributing to its lightweight yet strong structure.[4] A prominent horn projects from the lacrimal bone above the orbit, a distinctive trait shared with other dromaeosaurids. The quadrate bone is robust, indicating adaptations for powerful jaw adduction.[4] The teeth are ziphodont, characterized as conical, recurved, and laterally compressed with finely serrated carinae bearing 15–16 denticles per 5 mm on both mesial and distal edges.[4] There are 15 maxillary teeth and approximately 16 dentary teeth, with premaxillary teeth being larger and more symmetrical than those in the maxilla.[5] Crowns reach up to 20 mm in height, suited for puncturing and holding prey, and lack a D-shaped cross-section in the premaxilla contrary to earlier reports.[4] The forelimbs measure around 50 cm in length, featuring a three-fingered manus with robust phalanges and large, curved unguals, particularly on digit II, for grasping.[10] Hindlimbs display the arctometatarsal condition, where metatarsal III is pinched proximally between II and IV, enhancing cursorial ability.[5] The pedal ungual of digit II is enlarged and falcate, forming a sickle-shaped claw adapted for slashing.[10]

Classification

Historical classification

Dromaeosaurus albertensis was formally described and named by William D. Matthew and Barnum Brown in 1922, based on a partial skull, lower jaws, and isolated foot bones collected from the Belly River Formation (now part of the Dinosaur Park Formation) along the Red Deer River in Alberta, Canada. The authors provisionally classified the new genus within the family Deinodontidae—a group now synonymous with Tyrannosauridae—owing to overall similarities in skull proportions and robust construction with known deinodontids like Deinodon. However, they emphasized notable differences, including a reduced dentition (approximately 22-23 teeth versus 30+ in deinodontids), larger and more compressed premaxillary teeth, a lighter cranial build, and less specialized pedal elements, prompting them to erect a distinct new subfamily, Dromaeosaurinae, to accommodate these traits.[11] This initial placement persisted through the mid-20th century amid limited additional material, but the taxonomic understanding shifted dramatically in the late 1960s with John H. Ostrom's description of Deinonychus antirrhopus from the Lower Cretaceous Cloverly Formation of Montana. Ostrom identified profound anatomical parallels between Deinonychus and Dromaeosaurus, particularly in the specialized sickle-shaped ungual on pedal digit II (forming a raptorial "killing claw"), the elongated and robust forelimbs with trenchant manual claws, and modifications to the caudal vertebrae for a stiff, counterbalancing tail. These shared features, absent in tyrannosaurids, led Ostrom to recognize Dromaeosaurus as a close relative of Deinonychus rather than a tyrannosauroid, elevating the Dromaeosaurinae of Matthew and Brown to full family status as Dromaeosauridae, with Dromaeosaurus as the type genus. The family was defined by its agile, bipedal build adapted for predation, incorporating Dromaeosaurus alongside Deinonychus, Velociraptor mongoliensis, Saurornithoides mongoliensis, and Stenonychosaurus inequalis.[12] The 1970s and 1980s saw further refinements amid increasing discoveries of North American dromaeosaurid remains, including the naming of Saurornitholestes langstoni by Dale Russell in 1972 from similar Late Cretaceous horizons. Fragmentary specimens often blurred distinctions between Dromaeosaurus and sympatric taxa like Saurornitholestes, fueling taxonomic debates over referral and validity. Notably, in his 1988 monograph, Gregory S. Paul proposed synonymizing several dromaeosaurid genera—including potential mergers involving Dromaeosaurus and Saurornitholestes—based on perceived morphological overlap in skull and postcranial elements, arguing for greater taxonomic conservatism among these small theropods. These proposals, while influential in highlighting variability, were largely rejected by subsequent researchers favoring separation due to diagnostic differences in dentition and pedal proportions.[13]

Modern phylogeny

In modern phylogenetic analyses, Dromaeosaurus is consistently placed within Dromaeosauridae as a member of the subfamily Dromaeosaurinae, part of the larger clade Eudromaeosauria. This positioning is supported by shared synapomorphies with other dromaeosaurids, including a retroverted pubis, an enlarged and falciform ungual on pedal digit II (the "sickle claw"), and a fenestrated skull featuring a prominent maxillary fenestra adjacent to the antorbital fossa. These traits underscore its basal position among eudromaeosaurs, distinguishing it from more derived groups like Microraptorinae or Unenlagiinae.[5] Cladistic analyses have refined Dromaeosaurus' relationships over time. Currie's 1995 restudy of the holotype provided critical anatomical details, such as cranial and dental features, that established Dromaeosaurus albertensis as the eponymous taxon for Dromaeosaurinae and highlighted its monophyletic ties to other North American theropods. Norell and Makovicky (2004) corroborated this in a comprehensive review, recovering Dromaeosauridae as monophyletic and positioning Dromaeosaurus in a clade with Deinonychus and Achillobator based on 16 synapomorphies, including D-shaped premaxillary teeth and reduced opisthopuby. Subsequent updates, such as Longrich (2008), defined Eudromaeosauria and placed Dromaeosaurus as sister to Velociraptorinae, emphasizing traits like a flexor heel on pedal phalanx II-2; Fowler et al. (2011) echoed this in analyses of deinonychosaur locomotion, reinforcing its exclusion from Velociraptorinae through character optimization in parsimony trees. These studies typically yield dozens to hundreds of most parsimonious trees, with consistency indices around 0.45–0.60, illustrating robust but variably resolved topologies.[5][14] Recent 2020s matrices continue to depict Dromaeosaurus as a basal eudromaeosaur or within Dromaeosaurinae. Although some analyses have suggested it as sister to Dakotaraptor steini from the Hell Creek Formation, supported by shared robust manual and pedal morphology, the validity of Dakotaraptor as a dromaeosaurid has been questioned, with proposals that it represents a chimaera or non-dromaeosaurid theropod.[15][16] Alternatively, it forms a polytomy or clade with Yurgovuchia doellingi, Utahraptor ostrommaysorum, and Achillobator giganteus, based on tail and hindlimb characters in expanded datasets. The 2020 description of Dineobellator notohesperus from the San Juan Basin highlights multiple dromaeosaurid lineages across Laramidia during the Campanian–Maastrichtian, reinforcing a North American radiation but placing Dineobellator in Velociraptorinae rather than directly impacting Dromaeosaurus' resolution. However, the genus' fragmentary holotype and limited referred specimens contribute to ongoing polytomies in broader paravian trees, with over 90,000 equally parsimonious topologies in some runs underscoring the need for additional complete material.[17][10]

Paleobiology

Sensory capabilities and behavior

Dromaeosaurus exhibited advanced sensory capabilities, particularly in vision, as evidenced by its large orbits relative to skull size, which suggest keen eyesight suited for an active predator. The skull morphology indicates forward-facing eyes, enabling binocular vision and depth perception crucial for hunting in complex environments.[18] Due to limited fossil material, many paleobiological aspects of Dromaeosaurus are inferred from comparisons with better-known dromaeosaurids. Behavioral inferences point to Dromaeosaurus as primarily a solitary hunter or one engaging in loose, opportunistic associations, akin to patterns observed in related dromaeosaurids like Deinonychus, where evidence for coordinated pack hunting is lacking and taphonomic data suggest intraspecific competition instead.[19] Limb proportions, including elongated hindlimbs, indicate exceptional agility and a cursorial lifestyle, facilitating rapid pursuits and maneuvers through forested terrains.[20] Integumentary covering likely included protofeathers or pennaceous feathers on the body and arms, inferred from preserved filaments in basal dromaeosaurids such as Sinornithosaurus, supporting thermoregulation and possibly display functions in this feathered theropod clade.[21] Bone histology of related dromaeosaurids reveals densely vascularized tissue indicative of rapid growth and elevated metabolic rates, consistent with an endothermic physiology.[22]

Feeding mechanics

The jaw mechanics of Dromaeosaurus were adapted for delivering a relatively powerful bite among dromaeosaurids, facilitated by a robust quadrate bone and well-developed jaw adductor musculature. Finite element analyses indicate that the skull structure allowed for efficient force transmission during biting, with estimated posterior bite forces reaching approximately 885 N in adults, enabling the dinosaur to puncture tough hides and bone. This capacity supported a "puncture-and-pull" feeding strategy, where serrated, conical teeth pierced prey and then tore flesh through lateral jaw movements, as evidenced by parallel scratches on tooth microwear surfaces consistent with pulling actions on resistant tissues.[23] The enlarged sickle-shaped claw on pedal digit II played a primary role in prey capture, functioning to slash, pin, or restrain struggling animals rather than for climbing or disembowelment. Biomechanical modeling shows that the claw's curvature and hyperextensible phalanges optimized it for gripping and stabilizing medium-sized prey, allowing Dromaeosaurus to use its body weight to subdue victims while inflicting wounds with repeated kicks. Forelimb claws likely complemented this by raking flesh during close-quarters attacks, enhancing the overall lethality of encounters. Paleontological evidence points to a preference for medium-sized herbivorous prey, such as juvenile ornithopods or ceratopsians, over smaller invertebrates or very large adults. Tooth microwear patterns reveal greater adaptation to tougher, larger food items compared to sympatric troodontids, suggesting active predation or scavenging on vertebrates like hadrosaurs. Bite marks on ornithopod fossils attributable to small theropods, including deep punctures and scoring, suggest that dromaeosaurids like Dromaeosaurus may have targeted juveniles or weakened individuals, processing carcasses through biting and claw-assisted dismemberment.[24] As a small-bodied eudromaeosaurid, Dromaeosaurus employed an ambush hunting style, relying on bursts of speed from its agile build and precise claw strikes to surprise prey in forested or riverside environments, rather than sustained pursuits or coordinated pack tactics seen in larger relatives. Stable isotope analyses of dromaeosaurid teeth support solitary or minimally social foraging, with limited evidence for group hunting in species of this size.

Paleoecology

Stratigraphic distribution

Fossils of Dromaeosaurus are known exclusively from the Late Cretaceous of western North America, with the temporal range encompassing the Campanian and Maastrichtian stages, approximately 80 to 69 million years ago. The majority of specimens, including the type material of D. albertensis, derive from Campanian-aged deposits in Alberta and Montana. These include the Horseshoe Canyon Formation in Alberta, from which the holotype and additional material have been recovered, dated to approximately 74.5–71 million years ago; the Dinosaur Park Formation in southern Alberta, dated to 76.5–74.8 million years ago, where multiple isolated bones and teeth have been recovered from overbank and channel deposits.[3][25] Additional material comes from the Judith River Formation in north-central Montana, spanning 79–75 million years ago, including dentaries and teeth referable to Dromaeosaurus sp. found in the Coal Ridge Member. Teeth attributed to the genus are also reported from the Two Medicine Formation in north-central Montana (79–74 million years ago), primarily from the upper Hagans Crossing Member. Possible remains occur in the underlying Oldman Formation of southern Alberta (approximately 79–77 million years ago), based on isolated dromaeosaurid elements in similar stratigraphic contexts.[26][27][25] The stratigraphic distribution extends into the Maastrichtian with isolated teeth from the Frenchman Formation in southwestern Saskatchewan (approximately 69–66 million years ago). Similar isolated dental remains have been noted in the Hell Creek Formation of eastern Wyoming, though some attributions remain tentative pending further analysis. Overall, Dromaeosaurus fossils are preserved in fluvial and floodplain sediments across these units, reflecting deposition in dynamic riverine systems with associated overbank fines and channel sands.[28][29]

Associated fauna and environment

Dromaeosaurus fossils are primarily known from the Dinosaur Park Formation in southern Alberta, Canada, particularly within Dinosaur Provincial Park, a UNESCO World Heritage Site celebrated for its exceptional concentration of Late Cretaceous vertebrate remains, including numerous bonebeds that preserve assemblages from catastrophic events. These bonebeds, such as the famous Centrosaurus bonebed, often result from seasonal flooding on the ancient floodplain, where rapid burial in river channels and overbank deposits protected skeletons from erosion and scavenging. The paleoenvironment of the Dinosaur Park Formation was a warm, mesothermal coastal plain with a mean annual temperature of approximately 13.8°C (±2.0°C), characterized by humid conditions, meandering rivers, and swampy lowlands influenced by nearby marine incursions. Vegetation consisted of diverse lowland forests featuring deciduous angiosperms (such as Platanus-, Betula-, and Salix-like forms), conifers including Ginkgo species, and ferns, supporting a lush, seasonally flooded ecosystem that transitioned from alluvial plains to estuarine settings.[30][31] Dromaeosaurus coexisted with a rich array of dinosaurs in this ecosystem, including dominant herbivores such as the ceratopsians Centrosaurus and Chasmosaurus, and hadrosaurs like Gryposaurus, which comprised over 80% of the large vertebrate biomass and grazed on the fern- and conifer-rich vegetation. Other predators included troodontids (Troodon), smaller dromaeosaurids (Saurornitholestes), and apex tyrannosaurids such as Gorgosaurus, forming a complex food web where Dromaeosaurus likely served as a mid-tier carnivore, preying on small to medium-sized vertebrates and potentially overlapping niches with agile troodontids.[31][32]

References

  1. Dromaeosaurus | Natural History Museum
  2. Dromaeosaurus Matthew & Brown, 1922 - GBIF
  3. The family Deinodontidae, with notice of a new genus from the ...
  4. New information on the anatomy and relationships of ...
  5. A Review of Dromaeosaurid Systematics and Paravian Phylogeny
  6. [PDF] Theropoda) with Asian affinities from the latest Cretaceous of North ...
  7. Dromaeosaurus albertensis - Triebold Paleontology, Inc.
  8. Testing the function of dromaeosaurid (Dinosauria, Theropoda ... - NIH
  9. New Information on the Anatomy and Relationships of ... - jstor
  10. New Dromaeosaurid Dinosaur (Theropoda, Dromaeosauridae) from ...
  11. [PDF] vi.-the family deinodontidae, with notice of a new genus from the ...
  12. [PDF] Osteology oi Deinonychus antirrhopus, an Unusual Theropod from ...
  13. Predatory dinosaurs of the world : a complete illustrated guide
  14. The Predatory Ecology of Deinonychus and the Origin of Flapping in ...
  15. The First Giant Raptor (Theropoda: Dromaeosauridae) from the Hell ...
  16. New Dromaeosaurids (Dinosauria: Theropoda) from the Lower ...
  17. [PDF] BINOCULAR VISION IN THEROPOD DINOSAURS - ResearchGate
  18. (PDF) A Reevaluation of Cooperative Pack Hunting and ...
  19. [PDF] DROM,4EOS4URUS ALBERTENSIS (DINOSAURIA: THEROPODA)
  20. FEATHERED DINOSAURS Mark A. Norell and Xing Xu
  21. A microraptorine (Dinosauria–Dromaeosauridae) from the Late ...
  22. (PDF) The Vertebrate Fauna of the Judith River Formation, Montana
  23. Dentaries of small theropods from the Judith River Formation ...
  24. [PDF] The Fauna from the Tyrannosaurus rex Excavation, Frenchman ...
  25. A ceratopsid-dominated tracksite from the Dinosaur Park Formation ...
  26. New Absolute Paleoclimate Estimates from Dinosaur Provincial Park ...
  27. Palaeoenvironmental drivers of vertebrate community composition ...
  28. https://doi.org/10.1016/j.palaeo.2012.06.027
User Avatar
No comments yet.