Hubbry Logo
Clay mineralClay mineralMain
Open search
Clay mineral
Community hub
Clay mineral
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Clay mineral
Clay mineral
Clay mineral
View on Wikipedia
from Wikipedia

Oxford Clay (Jurassic) exposed near Weymouth, England

Clay minerals are hydrous aluminium phyllosilicates (e.g. kaolin, Al2Si2O5(OH)4), sometimes with variable amounts of iron, magnesium, alkali metals, alkaline earths, and other cations found on or near some planetary surfaces.

Clay minerals form in the presence of water[1] and have been important to life, and many theories of abiogenesis involve them. They are important constituents of soils, and have been useful to humans since ancient times in agriculture and manufacturing.

Properties

[edit]
See also: Pottery
Hexagonal sheets of the clay mineral kaolinite (SEM image, 1,340× magnification)

Clay is a very fine-grained geologic material that develops plasticity when wet, but becomes hard, brittle and non–plastic upon drying or firing.[2][3][4] It is a very common material,[5] and is the oldest known ceramic. Prehistoric humans discovered the useful properties of clay and used it for making pottery.[6] The chemistry of clay, including its capacity to retain nutrient cations such as potassium and ammonium, is important to soil fertility.[7]

Because the individual particles in clay are less than 4 micrometers (0.00016 in) in size, they cannot be characterized by ordinary optical or physical methods. The crystallographic structure of clay minerals became better understood in the 1930s with advancements in the x-ray diffraction (XRD) technique indispensable to deciphering their crystal lattice.[8] Clay particles were found to be predominantly sheet silicate (phyllosilicate) minerals, now grouped together as clay minerals. Their structure is based on flat hexagonal sheets similar to those of the mica group of minerals.[9] Standardization in terminology arose during this period as well,[8] with special attention given to similar words that resulted in confusion, such as sheet and plane.[8]

Because clay minerals are usually (but not necessarily) ultrafine-grained, special analytical techniques are required for their identification and study. In addition to X-ray crystallography, these include electron diffraction methods,[10] various spectroscopic methods such as Mössbauer spectroscopy,[11] infrared spectroscopy,[10] Raman spectroscopy,[12] and SEM-EDS[13] or automated mineralogy[10] processes. These methods can be augmented by polarized light microscopy, a traditional technique establishing fundamental occurrences or petrologic relationships.[14]

Occurrence

[edit]

Clay minerals are common weathering products (including weathering of feldspar) and low-temperature hydrothermal alteration products. Clay minerals are very common in soils, in fine-grained sedimentary rocks such as shale, mudstone, and siltstone and in fine-grained metamorphic slate and phyllite.[9]

Given the requirement of water, clay minerals are relatively rare in the Solar System, though they occur extensively on Earth where water has interacted with other minerals and organic matter. Clay minerals have been detected at several locations on Mars,[15] including Echus Chasma, Mawrth Vallis, the Memnonia quadrangle and the Elysium quadrangle. Spectrography has confirmed their presence on celestial bodies including the dwarf planet Ceres,[16] asteroid 101955 Bennu,[17] and comet Tempel 1,[18] as well as Jupiter's moon Europa.[19]

Structure

[edit]
View of tetrahedral sheet structure of a clay mineral. Apical oxygen ions are tinted pink.

Like all phyllosilicates, clay minerals are characterised by two-dimensional sheets of corner-sharing SiO4 tetrahedra or AlO4 octahedra. The sheet units have the chemical composition (Al, Si)3O4. Each silica tetrahedron shares three of its vertex oxygen ions with other tetrahedra, forming a hexagonal array in two dimensions. The fourth oxygen ion is not shared with another tetrahedron and all of the tetrahedra "point" in the same direction; i.e. all of the unshared oxygen ions are on the same side of the sheet. These unshared oxygen ions are called apical oxygen ions.[20]

In clays, the tetrahedral sheets are always bonded to octahedral sheets formed from small cations, such as aluminum or magnesium, and coordinated by six oxygen atoms. The unshared vertex from the tetrahedral sheet also forms part of one side of the octahedral sheet, but an additional oxygen atom is located above the gap in the tetrahedral sheet at the center of the six tetrahedra. This oxygen atom is bonded to a hydrogen atom forming an OH group in the clay structure. Clays can be categorized depending on the way that tetrahedral and octahedral sheets are packaged into layers. If there is only one tetrahedral and one octahedral group in each layer the clay is known as a 1:1 clay. The alternative, known as a 2:1 clay, has two tetrahedral sheets with the unshared vertex of each sheet pointing towards each other and forming each side of the octahedral sheet.[20]

Bonding between the tetrahedral and octahedral sheets requires that the tetrahedral sheet becomes corrugated or twisted, causing ditrigonal distortion to the hexagonal array, and the octahedral sheet is flattened. This minimizes the overall bond-valence distortions of the crystallite.[20]

Depending on the composition of the tetrahedral and octahedral sheets, the layer will have no charge or will have a net negative charge. If the layers are charged this charge is balanced by interlayer cations such as Na+ or K+ or by a lone octahedral sheet. The interlayer may also contain water. The crystal structure is formed from a stack of layers interspaced with the interlayers.[20]

Classification

[edit]
Structure of clay mineral groups

Clay minerals can be classified as 1:1 or 2:1. A 1:1 clay would consist of one tetrahedral sheet and one octahedral sheet, and examples would be kaolinite and serpentine. A 2:1 clay consists of an octahedral sheet sandwiched between two tetrahedral sheets, and examples are talc, vermiculite, and montmorillonite. The layers in 1:1 clays are uncharged and are bonded by hydrogen bonds between layers, but 2:1 layers have a net negative charge and may be bonded together either by individual cations (such as potassium in illite or sodium or calcium in smectites) or by positively charged octahedral sheets (as in chlorites).[9]

Clay minerals include the following groups:

Mixed layer clay variations exist for most of the above groups.[9] Ordering is described as a random or regular order and is further described by the term reichweite, which is German for range or reach. Literature articles will refer to an R1 ordered illite-smectite, for example. This type would be ordered in an illite-smectite-illite-smectite (ISIS) fashion. R0 on the other hand describes random ordering, and other advanced ordering types are also found (R3, etc.). Mixed layer clay minerals which are perfect R1 types often get their own names. R1 ordered chlorite-smectite is known as corrensite, R1 illite-smectite is rectorite.[25]

Summary of Clay Mineral Identification Criteria—Reference Data for Clay Mineral Identification [26]
Clay Kaolinite Dehydrated halloysite Hydrated halloysite Illite Vermiculite Smectite Chlorite
X-ray rf(001)(nanometers) 7 7 10 10 10–14 10–18 14
Glycol (mg/g) 16 35 60 60 200 300 30
CEC (meq/100 g) 3 12 12 25 150 85 40
K2O (%) 0 0 0 8–10 0 0 0
DTA End. 500–660° + Sharp* Exo. 900–975° Sharp Same as kaolinite but 600° peak slope ratio > 2.5 Same as kaolinite but 600° peak slope ratio > 2.5 End. 500–650° Broad. End. 800–900° Broad Exo. 950° 0 End. 600–750° End. 900°. Exo. 950° End. 610 ± 10° or 720 ± 20°

X-ray rf(001) is the spacing between layers in nanometers, as determined by X-ray crystallography. Glycol (mg/g) is the adsorption capacity for glycol, which occupies the interlayer sites when the clay is exposed to a vapor of ethylene glycol at 60 °C (140 °F) for eight hours. CEC is the cation exchange capacity of the clay. K2O (%) is the percent content of potassium oxide in the clay. DTA describes the differential thermal analysis curve of the clay.

Clay and the origins of life

[edit]

The clay hypothesis for the origin of life was proposed by Graham Cairns-Smith in 1985.[27][28] It postulates that complex organic molecules arose gradually on pre-existing, non-organic replication surfaces of silicate crystals in contact with an aqueous solution. The clay mineral montmorillonite has been shown to catalyze the polymerization of RNA in aqueous solution from nucleotide monomers,[29] and the formation of membranes from lipids.[30] In 1998, Hyman Hartman proposed that "the first organisms were self-replicating iron-rich clays which fixed carbon dioxide into oxalic acid and other dicarboxylic acids. This system of replicating clays and their metabolic phenotype then evolved into the sulfide rich region of the hot spring acquiring the ability to fix nitrogen. Finally phosphate was incorporated into the evolving system which allowed the synthesis of nucleotides and phospholipids."[31]

Biomedical applications of clays

[edit]

The structural and compositional versatility of clay minerals gives them interesting biological properties. Due to disc-shaped and charged surfaces, clay interacts with a range of drugs, protein, polymers, DNA, or other macromolecules. Some of the applications of clays include drug delivery, tissue engineering, and bioprinting.[32]

Mortar applications

[edit]

Clay minerals can be incorporated in lime-metakaolin mortars to improve mechanical properties.[33] Electrochemical separation helps to obtain modified saponite-containing products with high smectite-group minerals concentrations, lower mineral particles size, more compact structure, and greater surface area. These characteristics open possibilities for the manufacture of high-quality ceramics and heavy-metal sorbents from saponite-containing products.[34] Furthermore, tail grinding occurs during the preparation of the raw material for ceramics; this waste reprocessing is of high importance for the use of clay pulp as a neutralizing agent, as fine particles are required for the reaction. Experiments on the histosol deacidification with the alkaline clay slurry demonstrated that neutralization with the average pH level of 7.1 is reached at 30% of the pulp added and an experimental site with perennial grasses proved the efficacy of the technique. Moreover, the reclamation of disturbed lands is an integral part of the social and environmental responsibility of the mining company and this scenario addresses the community necessities at both local and regional levels.[35]

The tests which verify that clay minerals are present

[edit]

The results of glycol adsorption, cation exchange capacity, X-ray diffraction, differential thermal analysis, and chemical tests all give data that may be used for quantitative estimations. After the quantities of organic matter, carbonates, free oxides, and nonclay minerals have been determined, the percentages of clay minerals are estimated using the appropriate glycol adsorption, cation exchange capacity, K20, and DTA data. The amount of illite is estimated from the K20 content since this is the only clay mineral containing potassium.[36]

Argillaceous rocks

[edit]

Argillaceous rocks are those in which clay minerals are a significant component.[37] For example, argillaceous limestones are limestones[38] consisting predominantly of calcium carbonate, but including 10–40% of clay minerals: such limestones, when soft, are often called marls. Similarly, argillaceous sandstones such as greywacke, are sandstones consisting primarily of quartz grains, with the interstitial spaces filled with clay minerals.

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Clay mineral

View on Grokipedia
from Grokipedia
Clay minerals are a group of hydrous phyllosilicate minerals characterized by their fine particle size (typically less than 2 micrometers), layered crystal structures composed of alternating tetrahedral silica (SiO₄) and octahedral alumina (Al₂O₃ or MgO) sheets, and the presence of hydroxyl ions or water molecules within or between layers. These minerals exhibit unique properties such as plasticity when wet, the ability to swell upon hydration (up to doubling in thickness for some types), and a high cation exchange capacity due to isomorphous substitution in their lattices, where ions like Al³⁺ replace Si⁴⁺ in tetrahedral sheets or Mg²⁺ replaces Al³⁺ in octahedral sheets, creating a net negative charge balanced by interlayer cations (e.g., Na⁺, Ca²⁺). The primary types of clay minerals are classified based on their layer arrangements: 1:1 clays like , which consist of one tetrahedral sheet bonded to one octahedral sheet and are non-swelling with low (around 3–15 meq/100 g); and 2:1 clays, featuring two tetrahedral sheets sandwiching an octahedral sheet, which include expandable types such as smectites (e.g., in ) with high swelling and exchange capacities (80–150 meq/100 g) and non-expandable types such as illites with minimal swelling and lower exchange capacities (10–40 meq/100 g). Other notable groups include 2:1:1 clays like , which incorporate an additional octahedral sheet, and mixed-layer varieties such as illite-smectites. These structures result in platy morphologies with high specific surface areas (e.g., 700–800 m²/g for ), low permeability, and adsorptive capabilities that make clay minerals essential in geological processes. Clay minerals form primarily through chemical weathering of primary silicate rocks, such as the of feldspars into under acidic conditions with intense leaching, or hydrothermal alteration in geothermal settings that produces smectites. They occur ubiquitously in soils, sedimentary deposits (comprising about 70% of ancient sedimentary rocks as mudstones and shales), volcanic ashes, and weathered bedrock, influencing environmental factors like water retention, nutrient cycling, and by consuming CO₂ during formation. Due to their Mohs hardness of 1–2, malleability, and thermal stability, clay minerals have diverse applications, including ceramics production, drilling muds in oil exploration, landfill liners for waste containment, and adsorbents for pollutants like oils and pesticides.

Composition and Structure

Chemical Composition

Clay minerals are primarily hydrous aluminum phyllosilicates, characterized by a layered composed of silicon-oxygen tetrahedral sheets and aluminum- or magnesium-centered octahedral sheets bonded together with shared oxygen atoms. These minerals form the essential fine-grained components of soils and sediments, with their composition reflecting geological processes that concentrate silica, alumina, and water. The general chemical formula for smectites, one of the major groups of clay minerals, is (Na,Ca)0.33(Al,Mg)2(Si4O10)(OH)2⋅nH2O(Na,Ca)_{0.33}(Al,Mg)_2(Si_4O_{10})(OH)_2 \cdot nH_2O, where nn indicates the variable number of interlayer water molecules, and similar formulations apply to other groups like illites and vermiculites with adjustments in cation content and layer charge. Key elements in their composition include silicon and aluminum as the primary framework cations, oxygen as the main anion, and hydrogen in hydroxyl groups, alongside variable cations such as magnesium, iron, sodium, and potassium that substitute in octahedral sites or reside in interlayers to balance charges. Isomorphous substitution, the replacement of one ion by another of similar size and charge within the crystal lattice, introduces impurities and generates a net negative charge on the layers; for instance, trivalent aluminum (Al^{3+}) substituting for tetravalent silicon (Si^{4+}) in the tetrahedral sheet creates a layer charge deficit typically ranging from 0.2 to 0.6 per formula unit in smectites. This substitution extends to the octahedral sheet, where divalent ions like magnesium (Mg^{2+}) or iron (Fe^{2+}) replace trivalent aluminum, further influencing the mineral's overall composition and charge balance. Representative examples illustrate these compositional features: , a 1:1 clay mineral with minimal substitutions, has the formula Al2Si2O5(OH)4Al_2Si_2O_5(OH)_4, consisting of alternating tetrahedral and octahedral sheets with no interlayer cations. In contrast, , the predominant , shows compositional variations based on interlayer cations, such as sodium-rich montmorillonite (Na0.33(Al1.67Mg0.33)Si4O10(OH)2⋅nH2O)(Na_{0.33}(Al_{1.67}Mg_{0.33})Si_4O_{10}(OH)_2 \cdot nH_2O) or calcium-rich forms, reflecting environmental conditions during formation. Water plays an integral role in the composition of clay minerals, incorporated as structural hydroxyl (OH) groups within the octahedral and tetrahedral sheets and as exchangeable interlayer water molecules that hydrate cations and contribute to the hydrous nature denoted by the ⋅nH2O\cdot nH_2O term in formulas. This hydration is essential for maintaining the mineral's layered architecture and facilitating , though the exact varies with environmental and mineral type.

Crystal Structure

Clay minerals are phyllosilicates, characterized by a layered structure composed of repeating sheets of tetrahedral silica (T) and octahedral alumina (O) units. The tetrahedral sheets consist of silicon-oxygen tetrahedra linked to form continuous hexagonal rings, while the octahedral sheets involve cations such as aluminum, magnesium, or iron coordinated with oxygen and hydroxyl groups. These sheets combine to form two primary layer types: 1:1 layers, which alternate one tetrahedral and one octahedral sheet (TO), and 2:1 layers, which sandwich one octahedral sheet between two tetrahedral sheets (TOT). In 1:1 structures, such as , the TO layers stack directly with strong hydrogen bonding between the sheets, resulting in a non-expandable framework. Conversely, 2:1 structures, exemplified by , feature TOT layers held together by weaker van der Waals forces, allowing for interlayer spaces that accommodate cations like for charge balance. These interlayer cations, often exchangeable in expandable clays, influence the overall spacing and stability of the structure. Polymorphism in clay minerals arises from variations in octahedral sheet occupancy: dioctahedral forms, dominated by trivalent cations like aluminum, occupy two-thirds of the octahedral sites, as in and ; trioctahedral forms, with divalent cations like magnesium or iron, fill all sites, as seen in or . This distinction affects layer charge and reactivity, with dioctahedral clays typically exhibiting lower expandability. Typical basal spacings, measured along the c-axis perpendicular to the layers, reflect these structural differences: maintains a fixed spacing of about 0.7 nm, around 1.0 nm due to fixed interlayer , and smectites vary from 1.0 nm in dry conditions to 1.0–2.0 nm when hydrated, enabling swelling. Structural defects and disorder further diversify clay minerals, including turbostratic stacking where adjacent layers are rotated randomly relative to each other, common in smectites and reducing long-range order. Mixed-layer clays, such as -smectite or -smectite, consist of alternating sequences of different layer types at varying intervals, leading to irregular basal reflections in patterns.

Physical and Chemical Properties

Physical Properties

Clay minerals are characterized by their fine particle size, typically less than 2 μm in diameter, which classifies them as colloidal materials and contributes to their high specific surface area, reaching up to 800 m²/g in expansive types like smectites. This small size and large surface area enable intimate interactions with water and other substances, influencing their behavior in natural and industrial settings. A key physical attribute is plasticity, the ability of wet clay to deform without cracking, which arises from the layered structure and water adsorption on particle surfaces, particularly pronounced in smectites such as . complements this, manifesting as a reversible shear-thinning where suspensions flow under stress but regain when at rest, due to the platelet geometry and edge hydroxyl groups that facilitate structural reorganization. Swelling capacity varies among clay types, with non-expansive showing minimal expansion (basal spacing ~7.2 Å), while smectites like exhibit significant lattice expansion (up to 9.8–20 Å) and can increase in volume by up to 20 times upon absorption through hydration of interlayer cations. This property stems from the expandable 2:1 layer structure, allowing molecules to enter interlayer spaces. Color in clay minerals ranges from to or , primarily influenced by iron content, where ferric iron (Fe³⁺) imparts reddish hues through formation, and iron (Fe²⁺) contributes greenish tones. Specific gravity typically falls between 2.5 and 3.0 g/cm³, reflecting the silicate-based composition and varying degrees of hydration. Thermal stability involves progressive , with interlayer water loss occurring between 100°C and 200°C in smectites, followed by dehydroxylation of structural hydroxyls up to 600°C, leading to layer collapse and reduced expandability. These changes alter physical behavior, such as diminishing swelling potential after heating.

Chemical Properties

Clay minerals exhibit significant (CEC), which quantifies their ability to adsorb and release cations, typically measured in milliequivalents per 100 grams (meq/100g) of dry clay. This property arises primarily from permanent negative charges in the mineral lattice due to isomorphic substitutions, such as aluminum for in tetrahedral sheets or magnesium for aluminum in octahedral sheets, which create layer charge deficits balanced by interlayer cations. For instance, clays like display high CEC values ranging from 80 to 150 meq/100g, enabling substantial nutrient retention in soils, while , with its lower layer charge, has a CEC of 3 to 15 meq/100g, limiting its ion-holding capacity. The acidity and basicity of clay mineral surfaces stem from surface hydroxyl groups, which function as Brønsted acid sites by donating protons, particularly on edge faces where exposed Al-OH or Si-OH groups predominate. These sites contribute to pH-dependent charge development, where at low yields positive charges (e.g., >Al-OH₂⁺) and at high generates negative charges (e.g., >Al-O⁻), influencing overall surface reactivity beyond the permanent layer charge. This variable charge modulates interactions with ions and molecules, with acidity increasing under acidic conditions due to enhanced of hydroxyl groups. Adsorption on clay minerals involves high affinity for cations due to electrostatic attraction to negatively charged surfaces, with smectites showing stronger binding than kaolinites owing to higher CEC; anions adsorb preferentially on pH-dependent edge sites, while organics and pollutants like interact via , complexation, or hydrophobic partitioning. The Langmuir isotherm model effectively describes this process, assuming coverage on homogeneous sites, as demonstrated in studies of metal ion uptake where adsorption maxima reflect surface site density. For example, adsorbs lead and effectively, aiding pollutant remediation, with isotherm parameters revealing endothermic processes favored at lower temperatures. Clay minerals vary in chemical stability against , with exhibiting greater resistance due to its neutral layer structure and low reactivity, persisting in intensely weathered tropical soils, whereas expandable smectites like dissolve more readily under prolonged exposure. Dissolution rates are -sensitive, decreasing under acidic conditions ( < 4) due to proton-promoted edge attack but minimizing near neutral (around 7) before accelerating in alkaline environments ( > 9) via silica release; elevated temperatures accelerate dissolution exponentially, following Arrhenius kinetics, which enhances in geothermal or tropical settings. Iron-bearing clay minerals, such as nontronite and ferruginous smectites, possess redox properties enabling , where structural Fe(II)/Fe(III) acts as an environmental electron shuttle, reducing contaminants like nitroaromatics or oxidizing organics via intervalence charge transfer. These clays facilitate microbial respiration by accepting electrons from Fe(II)-reducing , releasing structural Fe(II) that propagates reduction waves, with mediators enhancing transfer in low-permeability matrices.

Classification

Major Groups

Clay minerals are primarily classified into major groups based on their structural layer types—such as 1:1 (one tetrahedral and one octahedral sheet) or 2:1 (two tetrahedral sheets sandwiching one octahedral sheet)—along with key criteria including layer charge, interlayer content, and expandability. Layer charge arises from isomorphous substitutions within the sheets, influencing cation exchange and stability, while interlayer content determines spacing and reactivity. Expandability refers to the ability of layers to separate upon hydration, a property that varies significantly across groups. These criteria distinguish the primary categories: kaolin, , , , vermiculite, and fibrous clays such as palygorskite and sepiolite groups. Kaolin group minerals feature a 1:1 layer structure with low layer charge (typically 0 to 0.3 per ), bonded by strong bonds and lacking interlayer cations, resulting in non-expandable behavior. This group is dioctahedral, with aluminum dominating the octahedral sheet. Representative examples include (Al₂Si₂O₅(OH)₄), , and , polymorphs with similar compositions but differing in stacking order. Due to their non-swelling nature, high purity, and plasticity, kaolin group minerals are widely used in ceramics, paper coating, paints, rubber fillers, pharmaceuticals, and cosmetics. Smectite group minerals possess a 2:1 layer structure with moderate to high layer charge (0.2–0.6 per ), primarily from octahedral substitutions, and interlayers occupied by exchangeable cations (e.g., Na⁺, Ca²⁺) and molecules. This configuration enables high expandability, with basal spacing increasing from about 1.0 nm (dry) to over 2.0 nm upon hydration, due to weak interlayer bonding. Key examples are , a dioctahedral common in soils ((Na,Ca)₀.₃₃(Al,Mg)₂(Si₄O₁₀)(OH)₂·nH₂O), often the main component of bentonite, and , its trioctahedral counterpart with magnesium in the octahedral sheet. Their high swelling and high cation exchange capacity make smectite group minerals useful in drilling muds, foundry sands, cat litter, sealants, absorbents, and environmental barriers. Illite group minerals exhibit a 2:1 layer structure with moderate layer charge (0.6–0.9 per formula unit), mainly from tetrahedral Al³⁺ for Si⁴⁺ substitutions, and interlayers fixed with K⁺ ions that bond adjacent layers tightly. The strong K⁺ fixation prevents expansion, maintaining a consistent 1.0 nm basal spacing, and these fine-grained, mica-like clays are typically dioctahedral. Prominent examples include (K₀.₆₅Al₂(Al₀.₆₅Si₃.₃₅O₁₀)(OH)₂), widespread in shales, and , an iron-rich variant found in marine sediments. Illite group minerals are used in ceramics, fillers, and construction materials. Chlorite group minerals have a 2:1 layer structure augmented by an interlayer hydroxide sheet (brucite- or gibbsite-like), yielding a total 2:1:1 configuration with variable layer charge (0.0–0.5 per formula unit) balanced internally. The interlayer hydroxide prevents water entry and expansion, fixing the basal spacing at about 1.4 nm, and these minerals can be either dioctahedral or trioctahedral. A classic example is clinochlore ((Mg,Fe,Al)₃(AlSi₃)O₁₀(OH)₈), a magnesium-rich trioctahedral chlorite common in metamorphic rocks. Chlorite group minerals are used in refractories and ceramics.

Subgroups and Variants

Within the smectite group of clay minerals, several subtypes are distinguished by their dominant octahedral cations, influencing their charge distribution and swelling behavior. Beidellite, an aluminum-rich variant, features tetrahedral substitution of by aluminum, resulting in a localized negative charge that promotes stronger bonding with interlayer molecules compared to other smectites. Saponite, magnesium-rich, exhibits primarily octahedral substitution where magnesium replaces aluminum, leading to a more delocalized charge and enhanced expandability in hydrated conditions. Nontronite, iron-rich, incorporates ferric iron in the octahedral sheet, imparting a hue and ferrimagnetic properties due to its structural Fe(III) content. Illite-smectite intergrades represent transitional mixed-layer clays where layers (expandable, ~14-15 Å spacing) alternate with layers (non-expandable, ~10 Å spacing), forming ordered or disordered structures detectable through (XRD) patterns. In ordered intergrades, such as R1 illite-smectite (one illite layer per three total layers), XRD shows characteristic 21-23 Å basal reflections with alternating dark and light contrasts in (TEM), reflecting a fixed 1:1 layering sequence. Disordered variants exhibit random interstratification of trans-vacant and cis-vacant 2:1 layers, causing peak shifts in XRD (e.g., d(111) and d(112) reflections) that migrate based on the proportion of each layer type, with errors in quantification below 10% for compositions exceeding 30% cis-vacant layers. These intergrades commonly occur in diagenetic to low-grade metamorphic sequences, with illite content varying continuously from 20% to 90%. Vermiculite serves as an intermediate clay mineral between and groups, characterized by a 2:1 phyllosilicate structure with a layer charge of 0.6-0.9 per half , primarily from tetrahedral substitutions. Its interlayer, occupied by exchangeable cations like magnesium, calcium, or sodium along with 1-2 layers of molecules, allows for hydration states yielding basal spacings of 1.15-1.44 nm, enabling moderate expansion unlike the fixed potassium interlayers in micas. This trioctahedral mineral often forms through alteration of or , exhibiting a of 120-200 cmol/kg and interstratified phases with mica in weathered environments. Vermiculite expands when heated, making it useful for insulation, horticulture, and fireproofing. Palygorskite and constitute fibrous variants of clay minerals, featuring chain-like structures of discontinuous 2:1 ribbons rather than continuous sheets, which confer lath-like morphologies and high aspect ratios. , magnesium-dominant, comprises ribbons three tetrahedral chains wide along the b-axis, enclosing rectangular channels filled with zeolitic water and exchangeable Ca or Mg cations, resulting in a basal XRD reflection at 12.2 . , more aluminum-rich, has narrower two-chain ribbons with greater structural diversity, including polymorphic variations, and a characteristic 10.5 XRD peak; both minerals adsorb water and organics via their tunnel structures, distinguishing them from platy clays. Palygorskite and sepiolite are used as absorbents and in filtration. Allophane, an amorphous clay-like mineral, predominates in volcanic ash-derived soils (Andisols) as hollow nanospherules composed of curved sheets with a variable Si/Al ratio of 0.4-1.0, forming through rapid weathering of under moist, silica-leaching conditions. Its gel-like aggregation yields high , low (<0.7 g/cm³), and elevated water retention (field capacity >100% in humid climates), alongside strong sorption due to its high , which diminishes upon drying. Though lacking crystallinity, allophane influences by stabilizing and metals in these environments.

Formation and Occurrence

Geological Formation

Clay minerals form through a variety of geological processes that involve the breakdown, transformation, and precipitation of primary minerals in response to environmental conditions. One primary mechanism is , which encompasses both physical and chemical processes acting on pre-existing rocks. Physical weathering breaks down rocks into finer particles through mechanical forces such as frost wedging, , and , producing clay-sized fragments that can further alter chemically. Chemical weathering, particularly , is crucial for neoformation of clay minerals; for instance, the hydrolysis of feldspars in granitic rocks under acidic conditions leaches out ions like Na⁺, K⁺, and Ca²⁺, leading to the formation of (Al₂Si₂O₅(OH)₄). This process dominates in horizons and weathering profiles, where dilute solutions facilitate the least soluble clays like kaolinite. In sedimentary environments, plays a key role in transforming clay minerals during burial. Dioctahedral , often derived from or weathered silicates, undergoes progressive alteration into mixed-layer -smectite and eventually through the uptake of K⁺ ions under increasing and . This transformation occurs in continental and marine sediments, where compaction and fluid interactions drive the illitization, stabilizing the mineral structure. formation is favored in K- and Al-rich settings, reflecting the geochemical during sediment maturation. Hydrothermal alteration contributes to clay mineral genesis in volcanic and geothermal settings, where heated fluids interact with host rocks. In these environments, can transform into through a series of reactions involving magnesium enrichment and silica loss, often via intermediate corrensite phases. formation is prominent in or terrestrial volcanic deposits, where Mg-rich fluids promote the development of trioctahedral structures stable under elevated temperatures. This process alters primary minerals like or , yielding as a dominant phyllosilicate. Authigenic precipitation occurs directly from solutions in specific depositional settings, such as soils and evaporites. In arid zones, forms through the precipitation of Mg-Al silicates from concentrated brines, often in association with or in calcic soils. This neoformation is driven by high Mg/Ca ratios and low , leading to fibrous clay structures stable in evaporitic basins. The time scales of clay mineral formation vary widely, spanning recent pedogenic processes to ancient metamorphic origins. Pedogenesis in weathering profiles can produce significant clay assemblages over thousands to hundreds of thousands of years, with rates of 0.001–0.1 g kg⁻¹ yr⁻¹ in saprolitic regoliths. Diagenetic and hydrothermal transformations extend to millions of years under burial, while metamorphic origins trace back to Precambrian events, reflecting prolonged tectonic cycles.

Natural Occurrence

Clay minerals are ubiquitous in terrestrial environments, particularly within profiles where their distribution is influenced by climatic conditions. In tropical regions, dominates lateritic soils, forming through intensive weathering that leaches bases and silica, leaving behind highly stable, low-activity clays characteristic of these iron-rich, red soils. Conversely, in temperate zones, smectites such as prevail in vertisols, which exhibit high shrink-swell potential due to their fine-textured, smectite-rich horizons that support in regions like the and parts of . In sedimentary basins worldwide, clay minerals constitute a major component of fine-grained deposits, with being prevalent in shales formed under low-energy depositional settings. , a non-expanding mica-like mineral, often comprises up to 50% or more of the clay fraction in these ancient marine and fluvial shales, such as those in the Illinois Basin or . Mixed-layer clays, typically illite-smectite intergrowths, are common in marine deposits, reflecting diagenetic evolution in environments like the Pierre Shale of the , where they bridge expandable and rigid layer structures. Volcanic and hydrothermal settings host distinctive clay assemblages, notably deposits rich in derived from the of beds. These swelling clays occur in layers up to several meters thick within and Tertiary volcanic sequences, such as the Mowry in or similar formations in the , where ash alteration in alkaline waters produces commercially viable beds. Economic deposits of specialized clays, including clays and , are concentrated in select global regions, supporting industries like ceramics and absorbents. clays, kaolinite-rich and highly plastic, are primarily mined in the (e.g., and ) and , . , dominated by or , occurs in deposits in and Georgia, USA, while is a major producer of and kaolin, accounting for approximately 12% of global production for each as of 2022. Overall, global reserves exceed billions of tons, with the as the leading producer for both kaolin and , and among the major producers. Beyond Earth, clay minerals have been detected on Mars, particularly smectites in ancient sedimentary rocks explored by rovers. NASA's Curiosity rover identified smectite-bearing mudstones in Gale Crater, indicating past aqueous environments with neutral to alkaline waters that facilitated clay formation billions of years ago. Similar detections by Opportunity and other missions confirm phyllosilicates, including smectites, across Noachian terrains, suggesting widespread hydrological activity on early Mars.

Identification and Analysis

Analytical Techniques

X-ray diffraction (XRD) is a primary technique for identifying clay minerals through the measurement of basal spacings, which correspond to interlayer distances in their layered structures. For instance, exhibits a characteristic basal reflection at 7.16 , while smectites show a spacing of 14-15 when air-dried, expanding to 17 upon treatment with , confirming their expandable nature. This glycolation method distinguishes smectites from non-swelling clays like , which maintains a fixed 10 spacing. The (060) reflection, typically at 1.490-1.499 , further differentiates dioctahedral from trioctahedral clays based on octahedral cation occupancy. Infrared (IR) spectroscopy complements XRD by analyzing vibrational modes of molecular bonds, particularly in the mid-IR range (4000-400 cm⁻¹), to identify functional groups diagnostic of clay compositions. Structural OH stretching bands are prominent; for example, displays sharp peaks at 3694, 3669, 3652, and 3620 cm⁻¹, with the latter attributed to inner Al-OH groups, while s show broader OH bands around 3620-3650 cm⁻¹. Si-O stretching vibrations occur near 1000-1100 cm⁻¹, with at approximately 1032 cm⁻¹, and Al-OH bending modes, such as 915 cm⁻¹ in , aid in assessing structural order and distinguishing dioctahedral from trioctahedral varieties. , a common , features an OH stretch at 3632 cm⁻¹. These band positions and intensities allow rapid qualitative identification, often detecting impurities like at 798 cm⁻¹. Electron microscopy techniques, including scanning electron microscopy (SEM) and transmission electron microscopy (TEM), provide high-resolution imaging of clay particle morphology and size distribution, essential for understanding texture and fabric at micro- and nanoscales. SEM reveals surface features and aggregate structures, such as the platy, pseudo-hexagonal crystals of or the fibrous forms of , with particle sizes typically ranging from 0.1 to 10 μm. TEM offers even finer detail, visualizing individual layers and lattice fringes, confirming morphologies like the vermiform stacks in smectites or tubular structures in , often with particles below 0.1 μm. These methods are particularly useful for oriented clay samples, highlighting interlayering and defects not resolvable by alone. Thermal analysis methods, such as (TGA) and (DTA), track mass loss and endothermic/exothermic events during heating, delineating and dehydroxylation processes unique to clay minerals. of interlayer and adsorbed occurs at low temperatures (50-300 °C), with smectites losing 7-17 wt.% due to multiple water layers, while shows minimal loss here. Dehydroxylation, involving structural OH removal, peaks at higher temperatures (350-950 °C); for example, exhibits an endothermic peak at 500-600 °C with ~14 wt.% mass loss, and smectites dehydroxylate around 600-800 °C. These stepwise events, combined with evolved gas analysis, enable mineral quantification and purity assessment. For quantitative phase analysis in clay mixtures, the method processes full XRD patterns by simulating reflections from known crystal structures to determine abundances with high accuracy, often achieving errors below 5% for major phases. This whole-pattern approach accounts for overlapping peaks common in clay-rich samples, outperforming traditional intensity methods, and is widely applied to quantify smectites, , and in sediments or soils. Calibration with internal standards enhances precision for low-abundance clays.

Diagnostic Tests

Diagnostic tests for clay minerals provide practical, often accessible methods to confirm their presence and type in samples, relying on physical, chemical, and structural responses unique to these fine-grained phyllosilicates. These tests are particularly useful in field or preliminary laboratory settings to distinguish clays from other components, focusing on properties like plasticity, , adsorption capacity, elemental composition, and interlayer behavior. The Atterberg limits test evaluates plasticity through the liquid limit (LL), the moisture content at which flows like a after 25 blows in a Casagrande cup, and the plastic limit (PL), the moisture at which a rolled thread begins to crumble at 3 mm diameter. The plasticity index (PI = LL - PL) serves as a key indicator of clay content, as clay minerals impart cohesiveness via adsorbed layers; higher PI values, typically above 7 for clayey , correlate with increased clay fractions finer than 2 μm, enabling and confirmation of clay-rich . Sedimentation tests separate and quantify the clay-sized fraction (<2 μm) based on Stokes' law, which governs particle settling velocity in suspension as proportional to the square of particle diameter, density difference, and inversely to fluid viscosity. In the standard procedure (ISO 11277), a pretreated soil suspension is placed in a cylinder at 30°C, and after agitation, aliquots are pipetted at 10 cm depth—first for silt + clay (immediately), then for clay alone after approximately 6 hours—to isolate the <2 μm particles by decantation or centrifugation. This method confirms clay mineral presence by yielding a concentrated fine fraction for further analysis, with clay content calculated as a percentage of total soil mass. Dye adsorption tests, such as the methylene blue method, assess the cation exchange capacity (CEC) of clays by measuring their affinity for cationic dyes. A 2 g clay sample is dispersed in water and titrated with a 0.4% methylene blue solution until a light blue halo appears on filter paper, indicating saturation of exchange sites; the adsorbed amount (MBA) relates to CEC via MBA (g/100 g) = [(titration volume / sample mass) × dye concentration factor], with CEC (meq/100 g) ≈ 100 × MBA / molecular weight adjustment. This test estimates CEC (typically 20–75 meq/100 g for smectitic clays) and specific surface area (100–600 m²/g), providing indirect confirmation of clay minerals like , which exhibit high adsorption due to expandable layers, with strong correlations (r > 0.7) to actual clay content and swell potential. X-ray fluorescence (XRF) serves as a rapid diagnostic for clay content through elemental ratios, particularly Al/Si, since clay minerals are aluminum-rich silicates while (SiO₂) dominates coarser fractions. In mudrocks and soils, higher Al/Si ratios (e.g., >0.3) indicate elevated clay proportions, as aluminum substitutes in clay lattices, whereas low ratios reflect siliceous sands; this proxy is calibrated against known mineralogies, showing reproducibility within 6% for Al/Si. For example, has an Al/Si near 1, while smectites range 0.25–0.33, allowing preliminary identification without full digestion. Limitations include matrix effects and overlap with other aluminosilicates, but it effectively confirms clay dominance in fine-grained samples. The oriented aggregate method enhances X-ray diffraction (XRD) sensitivity for clay identification by aligning platy particles on glass slides via filtration-peel technique, producing mounts that emphasize basal (00l) reflections. The <2 μm fraction is deposited from suspension onto a 0.45-μm filter, peeled onto a slide, and analyzed; diagnostic treatments reveal interlayer responses—solvation with expands to ~17 (from 15 air-dry), while remains stable at 10 , and shows 7 unaffected. Heating to 400°C collapses expandable clays like to 10 , distinguishing them from non-expandable ; further heating to 550°C eliminates the 7 peak of (due to dehydroxylation) but preserves at ~14 . These spacing collapses and expansions confirm specific clay types, with showing intermediate behavior (14–16 glycol expansion).

Applications and Uses

Industrial and Construction Uses

Clay minerals play a pivotal role in ceramics and production, where is particularly valued for its fine particle size and low iron content, enabling the creation of high-quality white . When fired at temperatures around 1200°C, undergoes dehydroxylation and transformation into , contributing to the material's translucency, strength, and thermal stability essential for durable ware. Kaolinite is also used in paints, rubber fillers, and other products due to its high purity and plasticity. In the oil and gas industry, , a clay, is widely used in muds due to its high swelling capacity and ability to impart , which stabilizes walls and carries cuttings to the surface during . The clay's thixotropic properties allow the mud to when static, preventing fluid loss, while maintaining flow under shear, thus enhancing operational efficiency in challenging subsurface conditions. Bentonite is additionally employed in foundry sands, cat litter (as pet waste absorbents), sealants, and environmental barriers owing to its swelling and cation exchange properties. Clay minerals serve as additives in mortars and cements to improve workability, providing plasticity that facilitates mixing, application, and to substrates. Historically, lime-clay mixes, such as those used in Roman pozzolanic concretes, combined slaked lime with volcanic or calcined clays to achieve hydraulic setting and enhanced durability in structures like aqueducts. Illite group minerals are commonly used in ceramics, as fillers, and in construction materials for their binding and stabilizing properties. Chlorite group minerals find applications in refractories and ceramics due to their thermal stability. In the paper industry, kaolin () is employed as a to enhance surface gloss, smoothness, and print quality by filling voids and reflecting light effectively on the paper sheet. This application leverages the clay's platelike particles, which orient during calendering to produce a bright, opaque finish suitable for high-end . Pillared clays, derived from minerals like , are engineered as catalysts in petroleum refining processes, such as hydrocracking and catalytic cracking, where metal oxides are intercalated between clay layers to create porous structures with high surface area for efficient conversion. These materials offer acidity and stability comparable to zeolites but at lower cost, supporting the breakdown of heavy oils into valuable fuels and . Vermiculite expands dramatically when heated, producing exfoliated vermiculite used for insulation, horticulture, lightweight concrete aggregates, and fireproofing due to its lightweight, fire-resistant, and inert properties. Palygorskite and sepiolite, fibrous clay minerals, are valued as absorbents and in filtration applications owing to their high surface area and sorptive capabilities.

Biomedical and Environmental Uses

Clay minerals have found significant applications in biomedical fields due to their , high surface area, and adsorptive properties. , a clay, serves as an effective in pharmaceutical formulations for controlled drug release, where its layered structure allows for intercalation of drug molecules, enabling sustained delivery and improved . For instance, montmorillonite nanocomposites have been utilized to shield sensitive drugs during , reducing degradation and facilitating targeted release in the . Kaolinite is also employed in pharmaceuticals and cosmetics for its purity, adsorptive qualities, and biocompatibility. In wound healing, kaolin clay is incorporated into bandages and dressings for its absorbent qualities, which help manage from wounds while promoting through activation of the clotting cascade. Kaolin-impregnated , for example, enhances intraoperative and supports postoperative recovery by rapidly absorbing blood and forming a barrier to prevent further . In environmental remediation, clay minerals excel at adsorbing contaminants such as and pesticides from water and soil, leveraging and surface complexation mechanisms. Organoclays, modified s with organic , are particularly effective for cleanup, as they selectively bind hydrocarbons and facilitate their removal from aqueous environments. -based organoclays have demonstrated high capacities for petroleum hydrocarbons, making them viable for large-scale spill mitigation. Additionally, in , clay is widely used as a binder in to mitigate contamination; its structure tightly adsorbs , preventing absorption in the and reducing toxicity in . Regulatory bodies have approved additives with a minimum aflatoxin binding capacity of 90% for safe incorporation into feeds. Clay minerals also play a pivotal role in prebiotic chemistry, particularly in the origins of life research. acts as a catalyst for RNA oligomer formation, promoting the of under simulated prebiotic conditions since pioneering experiments in the late 20th century. These catalytic properties arise from the clay's ability to concentrate and align monomers on its surface, facilitating formation and yielding RNA oligomers up to 50 units long without generating excessive side products.

Argillaceous Rocks

Argillaceous rocks are clastic sedimentary rocks containing silt- or clay-sized particles less than 0.0625 mm in diameter and/or clay minerals, often with significant clay mineral content. These rocks form from the lithification of clay-rich sediments and include varieties such as mudstones and shales, distinguished primarily by their texture and structure. The term "argillaceous" derives from the Latin "argilla," meaning clay, emphasizing their dominant clay mineral content, which imparts characteristic physical behaviors. Key types of argillaceous rocks include , which exhibits fissility due to parallel lamination allowing it to split into thin layers, and claystone, which is massive and blocky without such cleavage. Mudstone represents an intermediate form, often partly hardened and lacking pronounced fissility. Compositionally, these rocks vary; for instance, many are illite-rich, with as the predominant clay mineral alongside minor , , and . Illite-rich , common in marine deposits, reflect diagenetic alteration of earlier phases. These rocks form through the compaction of unconsolidated clay sediments under , leading to reduction and expulsion of interstitial water. Diagenetic hardening follows, involving chemical recrystallization and cementation, transforming soft into indurated rock over geological time. This process typically occurs in low-energy depositional environments like deep marine basins or floodplains. Argillaceous rocks possess low permeability due to their fine and tightly packed clay minerals, often below 1 nanodarcy, which restricts fluid flow. Fissility in shales arises from aligned clay platelets, enhancing their tendency to parallel to . Economically, they hold significant value as source rocks for hydrocarbons, where organic-rich varieties generate and gas, and as impermeable seals trapping reservoirs. Prominent examples include the Formation in the , a sequence up to 500 m thick, rich in and fissile mudstones, serving as a major North Sea hydrocarbon source. The in , a mudstone- deposit, exemplifies preservation of fine clay minerals that replicate soft-bodied fossils.

Clay in Broader Contexts

Clay minerals serve as valuable paleoenvironmental indicators, particularly through isotopic analysis that aids in reconstructing past climates. Oxygen isotopes in authigenic clay minerals, such as illite, provide quantitative insights into ancient salinity and temperature variations, as demonstrated in studies of paleolake Olduvai where δ¹⁸O values from illite revealed fluctuating hydrological conditions over millions of years. Similarly, clay mineral assemblages and their geochemical proxies have been used to infer intense climate shifts, with illite/smectite ratios indicating enhanced continental weathering during periods of global warming. In , clay minerals detected in meteorites offer clues to prebiotic chemistry and the potential for life-supporting environments beyond . Carbonaceous chondrite meteorites contain and other phyllosilicates that preserve organic compounds, suggesting clays facilitated molecular assembly in early solar system conditions. Samples from the Ryugu reveal organics trapped within smectite interlayers, highlighting clays' role in protecting biomolecules during space exposure. Regarding exoplanets, the posits that phyllosilicates could provide catalytic surfaces for organic on habitable worlds, though direct observations remain limited to spectroscopic models of mineral-rich atmospheres. In , clay minerals play a critical role in nutrient cycling by influencing adsorption, exchange, and release processes essential for . Their high allows clays like to retain essential ions such as and , preventing leaching and ensuring availability to plant roots during growth cycles. Through and biological interactions, clays facilitate the transformation of into bioavailable nutrients, enhancing in diverse agroecosystems. Historically, clay minerals have been integral to human culture, particularly in ancient pigments and writing materials. Sumerian civilizations utilized fine-grained clays for tablets inscribed with script, enabling the recording of administrative, literary, and religious texts from the third millennium BCE. These clays, often calcareous, were also mixed with lead-based minerals such as crocoite (PbCrO₄) and lead stannate (Pb₂SnO₄) to create durable pigments for coloring tablet inscriptions, as identified through on artifacts. Contemporary research highlights gaps in understanding climate change's effects on clay , with post-2020 studies documenting accelerated rates. Intensified rainfall patterns have increased physical and clay mobilization, leading to higher yields in watersheds and disrupting long-term stability. In continental settings, rising temperatures and altered are enhancing via clay formation, potentially amplifying but also exacerbating nutrient loss in agricultural lands. Projections indicate that by 2030, vast areas of farmland could face severe risks due to these dynamics, underscoring the need for targeted mitigation strategies.

References

  1. https://geo.libretexts.org/Bookshelves/Geology/Environmental_Geology_(Earle)/10:_Weathering_Soil_and_Clay_Minerals/10.05:_Clay_Minerals
  2. https://www.intechopen.com/chapters/76780
  3. http://www.minsocam.org/msa/Monographs/Mngrph_03/MG003_371-388.pdf
  4. https://pubs.usgs.gov/info/clays/
  5. https://www2.tulane.edu/~sanelson/eens211/weathering&clayminerals.htm
  6. https://www.srs.fs.usda.gov/pubs/ja/ja_barton002.pdf
  7. https://www.mindat.org/min-2156.html
  8. https://www2.tulane.edu/~sanelson/eens211/phyllosilicates.htm
  9. https://virtual-museum.soils.wisc.edu/display/soil-smectite/
  10. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/clay-mineral
  11. https://www.sciencedirect.com/science/article/pii/S0038080617300021
  12. https://pmc.ncbi.nlm.nih.gov/articles/PMC7100357/
  13. https://letters.rilem.net/index.php/rilem/article/download/107/108/899
  14. https://www.sciencedirect.com/science/article/abs/pii/S0169131706001013
  15. https://www.engineeringtoolbox.com/minerals-specific-gravity-d_1644.html
  16. https://link.springer.com/article/10.1007/s42860-023-00222-y
  17. https://www.sciencedirect.com/science/article/abs/pii/S1474706523001377
  18. https://www.osti.gov/servlets/purl/60343
  19. https://pubs.acs.org/doi/10.1021/acsearthspacechem.1c00323
  20. https://www.mdpi.com/2571-8789/5/1/13
  21. https://indianagriexam.com/courses/b-sc-agriculture-hons-i-semester-six-deam-commitee-of-icar/lesson/cation-exchange-capacity-cec-anion-exchange-capacity-aec-base-saturation-and-buffering-capacity/
  22. https://www.sciencedirect.com/science/article/abs/pii/S0169131702001102
  23. https://www.scielo.br/j/jbchs/a/WQJ9RW3BdBSZn48btRjqGqc/?lang=en
  24. https://go.gale.com/ps/i.do?id=GALE%257CA4745581&sid=googleScholar&v=2.1&it=r&linkaccess=abs&issn=00368075&p=HRCA&sw=w
  25. https://www.intechopen.com/chapters/49766
  26. https://pmc.ncbi.nlm.nih.gov/articles/PMC8154241/
  27. https://www.sciencedirect.com/science/article/abs/pii/S0021979797952462
  28. https://pmc.ncbi.nlm.nih.gov/articles/PMC6316844/
  29. https://www.researchgate.net/publication/232417107_Experimental_study_of_the_effect_of_pH_and_temperature_on_the_kinetics_of_montmorillonite_dissolution
  30. https://www.sciencedirect.com/science/article/abs/pii/S0016703704007872
  31. https://pubs.geoscienceworld.org/minersoc/claymin/article/51/2/267/300748/Effects-of-OH-activity-and-temperature-on-the
  32. https://pubs.acs.org/doi/10.1021/acs.est.4c07835
  33. https://www.tandfonline.com/doi/abs/10.1080/10643389.2023.2221154
  34. https://www.sciencedirect.com/science/article/abs/pii/S0883292711001806
  35. https://www.intechopen.com/chapters/81885
  36. https://activeminerals.com/blog/kaolin-guide/
  37. http://www.minsocam.org/msa/collectors_corner/arc/nomenclaturecl1.htm
  38. https://geo.libretexts.org/Bookshelves/Geology/Environmental_Geology_(Earle)/10%3A_Weathering_Soil_and_Clay_Minerals/10.05%3A_Clay_Minerals
  39. https://pubs.usgs.gov/of/2001/of01-041/htmldocs/clays/seppaly.htm
  40. https://www.usgs.gov/publications/clay-mineral-formation-and-transformation-rocks-and-soils
  41. https://pubs.usgs.gov/sir/2010/5070/c/Chapter11SIR10-5070-C-3.pdf
  42. https://rruff.geo.arizona.edu/doclib/am/vol76/AM76_628.pdf
  43. https://pubs.usgs.gov/of/1977/0794/report.pdf
  44. https://carboncycle.princeton.edu/document/471
  45. https://www.srs.fs.usda.gov/pubs/ja/ja_price014.pdf
  46. https://ui.adsabs.harvard.edu/abs/2021GeoRL..4892957G/abstract
  47. https://www.nrcs.usda.gov/sites/default/files/2022-06/Illustrated_Guide_to_Soil_Taxonomy.pdf
  48. https://pmc.ncbi.nlm.nih.gov/articles/PMC34286/
  49. https://pubs.usgs.gov/pp/1064a/report.pdf
  50. https://pubs.usgs.gov/pp/1522/report.pdf
  51. https://pubs.usgs.gov/myb/vol1/2019/myb1-2019-clay-shale.pdf
  52. https://www.statista.com/statistics/1312558/bentonite-production-volume-worldwide-by-country/
  53. http://large.stanford.edu/courses/2024/ph240/yuan1/docs/usgs-mcs-2024.pdf
  54. https://pubs.usgs.gov/periodicals/mcs2025/mcs2025-clays.pdf
  55. https://www.nasa.gov/missions/mars-science-laboratory/curiosity-rover/curiosity-tastes-first-sample-in-clay-bearing-unit/
  56. https://ntrs.nasa.gov/citations/20180004268
  57. https://eprints.whiterose.ac.uk/id/eprint/188148/7/Revised_paper_Round_3.pdf
  58. https://www.clays.org/wp-content/uploads/2020/08/410.pdf
  59. https://pubs.usgs.gov/publication/70010409
  60. https://www.sciencedirect.com/science/article/pii/S0169131721002738
  61. https://www.sciencedirect.com/science/article/pii/S2451912X17300703
  62. https://pubs.geoscienceworld.org/msa/ammin/article/109/12/2037/643771/Evaluation-of-the-Rietveld-method-for-determining
  63. https://uta.pressbooks.pub/soilmechanics/chapter/atterberg-limit-test/
  64. https://www.sciencedirect.com/topics/engineering/plasticity-index
  65. https://www.fao.org/fileadmin/user_upload/GSP/BESOLAN/BESOLAN_Clay_webinar_ISO_11277_Chris_Vanhoof_final2.pdf
  66. https://thescipub.com/pdf/ajassp.2011.1282.1286.pdf
  67. https://agupubs.onlinelibrary.wiley.com/doi/full/10.1029/2019GC008414
  68. https://www.searchanddiscovery.com/documents/2016/41773brown/ndx_brown.pdf
  69. https://www.researchgate.net/figure/Si-Al-ratio-of-the-clay-minerals_tbl3_276836444
  70. https://pubs.usgs.gov/of/2001/of01-041/htmldocs/methods/oamount.htm
  71. https://www.tandfonline.com/doi/full/10.1080/21870764.2020.1756063
  72. https://www.cheralle.com/blogs/news/kaolin-the-secret-source-of-porcelain-quality
  73. https://pubs.usgs.gov/periodicals/mcs2024/mcs2024-clays.pdf
  74. https://pmc.ncbi.nlm.nih.gov/articles/PMC9722465/
  75. https://cigmat.cive.uh.edu/sites/cigmat/files/files/conference/poster/2013/1.pdf
  76. https://www.nps.gov/orgs/1739/upload/preservation-brief-02-repointing.pdf
  77. http://www.ce.memphis.edu/1101/notes/concrete/everything_about_concrete/02_history.html
  78. https://ui.adsabs.harvard.edu/abs/1991ApCS....5..397B/abstract
  79. https://www.lrl.mn.gov/docs/pre2003/other/890587.pdf
  80. https://www.semanticscholar.org/paper/Clays-as-Catalysts-in-Petroleum-Refining-Industry-Emam/080184c43f5f73e7c3691b9766998ffbd561e979
  81. https://pmc.ncbi.nlm.nih.gov/articles/PMC8906976/
  82. https://pubs.usgs.gov/periodicals/mcs2025/mcs2025-vermiculite.pdf
  83. https://www.accessscience.com/content/article/a049900
  84. https://www.kgs.ku.edu/General/Class/sedimentary.html
  85. https://www.mindat.org/glossary/argillaceous_rock
  86. https://dnr.mo.gov/document-search/clay-shale-pub2905/pub2905
  87. https://www.britannica.com/science/claystone
  88. https://agupubs.onlinelibrary.wiley.com/doi/full/10.1029/2004JB003055
  89. https://www.researchgate.net/figure/Microscopic-characteristics-of-the-argillaceous-shale-a-Clay-or-silt-distributed-along_fig7_320701564
  90. https://pubs.geoscienceworld.org/aapg/books/book/1526/chapter/107225102/DiagenesisCompaction
  91. https://pubs.geoscienceworld.org/aapg/aapgbull/article-abstract/43/7/1766/550533/Problems-and-Progress-in-Studies-of-Diagenesis-of
  92. https://www.researchgate.net/publication/330095464_Permeability_of_Clays_and_Shales
  93. https://www.scielo.cl/pdf/andgeol/v49n3/0718-7106-andgeol-49-03-0345.pdf
  94. https://wiki.aapg.org/Shale-gas_resource_systems
  95. https://webapps.bgs.ac.uk/lexicon/lexicon.cfm?pub=KC
  96. https://burgess-shale.rom.on.ca/science/the-burgess-shale/geological-background/turning-a-mudstone-into-a-shale/
  97. https://geology.rutgers.edu/images/Gebregiorgis_et_al_2020_GRL.pdf
  98. https://pmc.ncbi.nlm.nih.gov/articles/PMC6946268/
  99. https://pmc.ncbi.nlm.nih.gov/articles/PMC8880559/
  100. https://www.geochemicalperspectivesletters.org/article2307/
  101. https://www.frontiersin.org/journals/astronomy-and-space-sciences/articles/10.3389/fspas.2025.1678046/full
  102. https://pmc.ncbi.nlm.nih.gov/articles/PMC10960002/
  103. https://serc.carleton.edu/kskl_educator/soil_chemistry/chap_4_bkgnd.html
  104. https://www.metmuseum.org/essays/the-origins-of-writing
  105. https://www.sciencedirect.com/science/article/pii/S2405844016319181
  106. https://www.nature.com/articles/s41598-025-26881-6
  107. https://www.nature.com/articles/s41467-025-64217-0
  108. https://www.nature.com/articles/s41598-025-05947-5
Add your contribution
Related Hubs
User Avatar
No comments yet.