Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to Birdlime.
Nothing was collected or created yet.
Birdlime
View on Wikipediafrom Wikipedia
Birdlime or bird lime is an adhesive substance used in trapping birds. It is spread on a branch or twig, upon which a bird may land and be caught. Its use is illegal in many jurisdictions.
Manufacture
[edit]
Historically, the substance has been prepared in various ways, and from various materials.
In South Africa, birdlime (called voëlent in Afrikaans) is prepared from mistletoe fruits. A handful of ripe fruits is chewed until sticky, and the mass is then rubbed between the palms of the hands to form long and extremely sticky strands which are then coiled around small thin tree branches where birds perch.[1]
A popular form in Europe was made from holly bark, boiled for 10 to 12 hours. After the green coating is separated from the other, it is stored in a moist place for two weeks. It is then pounded into a thick paste, until no wood fibres remain, and washed in running water until no small specks appear. After fermenting for four or five days, during which it is frequently skimmed, the substance is mixed over a fire with a third part of nut oil. It is then ready for use.[2]
Another popular form made in Asia is from the Ilex integra tree.[2] The shrub Ceodes umbellifera was also commonly used by indigenous Hawaiians as they drove many species extinct for their feathers.[3]
On Orchid Island, the Tao people also use Ilex integra, which they call niket. People of the island's villages have historically used it to trap several kinds of birds. In the village of Yayo, people used it on bamboo sticks to catch the Brown-eared bulbul. Their village song describes this practice.[4]
Birdlime from Damascus was supposed to be made of sebestens, their kernels being frequently found in it; this version was not able to endure frost or wet.[2] That brought from Spain was said to have a bad odor.[2] That of the Italians was made of mistletoe berries, heated, mixed with oil, as before; to make it water resistant, they added turpentine.[2] It was said that the bark of the wayfaring tree (Viburnum lantana) made birdlime as good as the best.[2]
Nathaniel Atcheson, secretary to the Society of Ship-Owners of Great Britain, in his 1811 work On the Origin and Progress of the North-West Company of Canada with a history of the fur trade... mentions birdlime (p 14) as an important import commodity for use in the Canadian west in the late 18th century.
Legal status
[edit] | The examples and perspective in this section deal primarily with Europe and do not represent a worldwide view of the subject. (October 2021) |
Europe
[edit]In July 2020, France was poised to outlaw "glue-trapping" (French: chasse à la glu) of birds (thrushes and blackbirds within quotas), using sticks covered in glue, after the European commission threatened legal action and fines.[5] However, in November 2020, advocate general Juliane Kokott ruled that glue-trapping was compatible with the 2009 EU Birds Directive, and an allowable exception to the directive's ban of bird lime use.[6]
In the Valencian region of Spain, birdlime (locally known as parany) is commonly used to capture the song thrush, which is a delicacy throughout Spain and is used in many local recipes. In spite of the EU's attempts to curb this practice, it is still tolerated in this region.[7][8][9]
In March 2021 this practice was ruled by European Court of Justice to be illegal in the European Union.[10]
Africa
[edit]In South Africa trapping birds with birdlime has been illegal since 1934, when Deneys Reitz, as Minister for Agriculture, passed the Wild Birds Protection Act.[11]
Other uses
[edit]The 4th-century BC Greek writer Aeneas Tacticus recommends (34.1–2) birdlime be used as a substance which will prevent fires from burning wood or other combustible materials, when smeared upon their surfaces.
Birdlime was used in the manufacturing of British sticky bombs during World War II.[12]
See also
[edit]References
[edit]- ^ Johnson, Thomas B. (1848) The sportsman's cyclopaedia Archived 2014-01-08 at the Wayback Machine, p.56.
- ^ a b c d e f "Birdlime". Cyclopædia, or, An universal dictionary of arts and sciences. Vol. 2. 1728. p. 103.
- ^ Buck, P.H. (1964). Arts and crafts of Hawaii. Bishop Museum Press. pp. 45, 217–218.
- ^ Syaman Misiva (2015). Bird Culture of the Botol Tobago. Hsinchu: National Chiao Tung University Press. p. 108-111. ISBN 978-986-6301-76-6.
- ^ Willsher, Kim (30 July 2020). "European commission orders France to outlaw 'barbaric' glue traps for birds". The Guardian. Archived from the original on 31 July 2020. Retrieved 1 August 2020.
- ^ Cendrowicz, Leo (18 January 2021). "'Barbaric' French glue hunting could be ruled illegal by EU court". Archived from the original on 17 January 2021. Retrieved 18 January 2021.
- ^ Las Provincias (December 14, 2006). "Un entramado para cazar tordos" (in Spanish). Archived from the original on March 3, 2016. Retrieved July 2, 2008.
- ^ "El Tribunal de la UE condena a España por permitir la caza con 'parany' en la Comunidad Valenciana" (in Spanish). Europa Press. Archived from the original on 2008-06-14.
- ^ Commission of the European Communities (9 December 2004). "Failure of a Member State to fulfil obligations – Directive 79/409/EEC – Conservation of wild birds – Hunting using limed twigs – Summary of the Judgment". Archived from the original on 26 May 2019. Retrieved 21 October 2009.
- ^ France, Connexion (18 March 2021). "Glue trap hunting of birds in France illegal, EU court rules". www.connexionfrance.com. Archived from the original on 18 March 2021. Retrieved 18 March 2021.
- ^ Skotnes-Brown, Jules (2021). "Preventing Plague, Bringing Balance: Wildlife Protection as Public Health in the Interwar Union of South Africa". Bulletin of the History of Medicine. 95. Johns Hopkins University Press: 492–493. Retrieved 23 November 2025.
- ^ Macrae, Stuart (1971). Winston Churchill's Toyshop. Roundwood. p. 124. ISBN 978-0-900093-22-7.
This article incorporates text from a publication now in the public domain: Chambers, Ephraim, ed. (1728). "Birdlime". Cyclopædia, or an Universal Dictionary of Arts and Sciences. Vol. 2 (1st ed.). James and John Knapton, et al. p. 103. Retrieved April 28, 2016.[1]
External links
[edit]
Birdlime
View on Grokipediafrom Grokipedia
Definition and Composition
Etymology and Terminology
The English term "birdlime" first appeared in the late Middle English period as brydelyme or byrde lyne, with the earliest recorded use dating to around 1400 in the writings of Henry Daniel, an English botanist and alchemist.[6] It is a compound derivation from "bird" (Old English brid, referring to avian species) and "lime" (Old English līm, denoting a sticky, adhesive substance derived from plant sources like holly bark or mistletoe).[7][8] The "lime" element specifically evokes a viscous, glue-like material smeared on twigs to ensnare birds, distinct from the mineral lime used in construction; this usage of "lime" traces to Proto-Germanic *leimaz, implying something adhesive or loamy, and entered English via Anglo-Saxon practices of bird trapping. Historically, "birdlime" has served as the standard terminology in English for this adhesive trap, with synonyms including "bird glue" or simply "lime" in contexts emphasizing its sticky properties.[9] In non-English traditions, equivalent terms reflect similar descriptive origins, such as German Vogelleim ("bird glue"), from which the English word may partially calque, or Afrikaans voëlgom and voëlent in South African usage for mistletoe-based variants.[9] Ancient references, including Latin viscum for mistletoe-derived lime, underscore its long-standing role in ornithological entrapment, though modern terminology often specifies regional preparations to distinguish natural from synthetic adhesives.[10]Primary Ingredients and Variants
Traditional birdlime is primarily composed of viscous extracts from the inner bark of the holly tree (Ilex aquifolium), collected in early summer, which yields a mucilaginous gum after boiling for 6 to 8 hours until tender, followed by underground fermentation for 2 to 3 weeks, pounding into a paste, and kneading in water to purify the adhesive mass.[11] The berries of mistletoe (Viscum album) provide another core ingredient, with their sticky viscin obtained by heating or crushing, often blended with nut oil to form a pliable, tenacious glue suitable for coating twigs.[2] Regional variants substitute other plant materials rich in natural resins or gums, such as the bark of the wayfaring tree (Viburnum lantana) in Europe or sebesten kernels (Cordia myxa) in Damascus, where the latter produces a less durable adhesive prone to failure in frost or wet conditions.[2] In Asia, the bark of Ilex integra serves a similar purpose through boiling and processing akin to holly bark methods.[2] Additives like turpentine, used in Italian and Spanish preparations, enhance water resistance, while American variants incorporate slippery elm (Ulmus rubra) bark for its comparable slimy extract.[2][10] These plant-based formulas predominate historically, with the final product's stringy, greenish consistency restored by moistening after drying.[11]Chemical and Physical Properties
Birdlime, as a natural adhesive, exhibits composition variations depending on its botanical source, but commonly features polysaccharides, resins, and terpenoid compounds that confer its characteristic tackiness. Derived from mistletoe (Viscum album), the primary adhesive agent is viscin, a mucilage comprising hierarchically organized cellulose microfibrils surrounded by a humidity-responsive matrix of arabinogalactan polysaccharides.[12] Chemical analysis of viscin mucilage identifies dominant neutral sugars including arabinose, xylose, and glucose, alongside uronic acids (up to 20-30% in some extracts) and trace proteins, with arabinose:xylose:glucose ratios serving as species-specific markers.[13][14] Holly bark (Ilex aquifolium or related species) yields birdlime rich in resinous extractives, notably pentacyclic triterpene esters and fatty alcohols such as ilicylic and mochylic alcohols, which form the viscous base after fermentation and extraction processes.[15][16] These components, including bitter principles like ilicine and aromatic resins, contribute to the material's solubility in organic solvents and resistance to drying.[15] Physically, birdlime displays high adhesiveness and viscoelastic behavior, enabling it to entangle feathers and adhere to substrates like twigs without immediate hardening, thus facilitating passive bird capture.[1] Its malleability allows manipulation into thin, extensible threads or coatings, while humidity activation enhances self-adhesion through matrix swelling and microfibril interlocking, akin to contact welding in viscin.[12] The substance remains tacky over long storage periods, even unsealed, due to low volatility and inherent stability, though exposure to air can induce partial desiccation reversible by water or oils.[17][2] It is generally insoluble in water, exhibiting elasticity under stress rather than brittle failure, which distinguishes it from synthetic glues.[18]Historical Development
Ancient Origins and Early Uses
The practice of using birdlime to trap birds dates to classical antiquity, with archaeological and textual evidence indicating its establishment in ancient Greece, Rome, and Egypt as a method for capturing small perching species on branches or twigs coated with the adhesive.[5] In these regions, birdlime served primarily for subsistence hunting, enabling hunters to ensnare birds without complex mechanical devices or projectiles, relying instead on the substance's viscosity to immobilize wings and feet upon contact.[17] The earliest written Western records of birdlime appear in ancient Greek sources, describing it as a sticky concoction applied by hunters to lure and capture avian prey, often derived from plant exudates like those from mistletoe or holly bark.[19] Greek texts highlight its utility in targeting songbirds and similar small fowl, reflecting a widespread technique integrated into local ecologies where suitable adhesive plants were abundant.[17] Roman author Pliny the Elder, in his Natural History composed around 77 AD, provides one of the most detailed early accounts, explaining how the milky juice from mistletoe berries—extracted and processed—was kneaded with oil to produce birdlime effective for snaring birds by tangling their feathers.[20] Pliny notes its application in deliberate setups, such as smearing it on perches to exploit birds' natural landing behaviors, underscoring a practical, low-technology approach to fowling that persisted across Mediterranean cultures.[20] While Egyptian evidence remains more inferential, textual and material hints suggest analogous adhesive trapping methods supplemented net-based or decoy strategies in Nile Valley bird procurement by the New Kingdom period (circa 1550–1070 BC).[5]Medieval and Early Modern Applications
During the medieval period in Europe, particularly in England, birdlime was a primary tool for capturing small wild birds such as songbirds and thrushes, which were harvested for food and supplemented diets amid limited alternative protein sources. Archaeological and documentary evidence indicates that wild bird consumption rose notably from the late fourteenth to early fifteenth centuries, with fowlers applying the adhesive to branches or twigs to ensnare birds by their feet upon landing, enabling efficient capture without advanced weaponry.[21][22] This method targeted species like larks and finches, which were deemed suitable for table fare despite their modest size, and was practiced by specialized birders who supplied urban markets and households.[22] Birdlime also facilitated aviculture, allowing the live capture of birds for cages as pets or songbirds, a pursuit valued for entertainment among nobility and clergy, though records emphasize its role in provisioning rather than elite sport.[23] In broader European contexts, the technique spread over tree branches to trap flocks en masse during migrations, reflecting practical adaptations to seasonal abundance rather than regulated hunting estates dominated by larger game.[24] In the early modern era, spanning the sixteenth to eighteenth centuries, birdliming persisted as a versatile fowling practice across social strata in England and continental Europe, serving both aristocratic pursuits and common provisioning of meat, feathers for quills and adornment, and other materials. Tudor-era birders employed it alongside snares and nets to stock tables with small fowl, as detailed in contemporary accounts of household economies.[25] Literary references in works by Shakespeare and Jonson, such as allusions to "bird-lime" in contexts of entrapment, underscore its cultural familiarity as a method evoking cunning and inevitability in capture, often yielding dozens of birds per session when smeared on decoy perches.[26][27] By the late seventeenth century, treatises like John Smith's The Experience'd Fowler (1697) described refined applications, blending birdlime with nuts or bark infusions to enhance adhesiveness for targeting specific species during autumnal flights, though its labor-intensive nature began yielding to emerging firearms among elites.[28]19th to 20th Century Evolution
During the 19th century, birdliming persisted as the dominant technique for mass-trapping small passerines across Europe, particularly for food, with practitioners smearing adhesive on branches to ensnare larks, thrushes, and other songbirds in quantities sufficient to supply markets.[4] This method, rooted in earlier traditions, involved labor-intensive preparation from holly bark or mistletoe berries and was especially prevalent in rural areas of France, Italy, and Britain until the late 1800s.[21] Emerging concerns over cruelty—evident in the adhesive's propensity to cause prolonged suffering through feather entanglement and exhaustion—prompted initial reforms, including Britain's Wild Birds Protection Act of 1880, which curtailed capture of protected species during nesting periods without fully prohibiting lime use.[21] Entering the 20th century, birdlime application continued in select regions amid industrialization and urbanization, which reduced reliance on wild birds as a protein source, but faced escalating regulatory scrutiny driven by conservation imperatives.[5] In the United States, the Migratory Bird Treaty Act of 1918 outlawed unauthorized pursuit or capture of migratory species "by any means whatever," encompassing adhesive traps and contributing to a sharp drop in such practices on the continent.[29] European nations followed suit with piecemeal restrictions; for example, Spain documented conflicts over non-selective passerine trapping, including liming, as early as 1933, reflecting tensions between tradition and emerging wildlife protection norms.[30] Post-World War II, the shift accelerated as international agreements prioritized biodiversity, rendering birdlime increasingly obsolete in Western contexts through bans on indiscriminate methods that ensnared non-target species.[5] The European Economic Community's 1979 Birds Directive explicitly forbade glue-based traps as non-selective, though exemptions persisted in France for "traditional" thrush and finch capture until the European Court of Justice's 2021 ruling enforced a total ban, citing violations of selective hunting standards.[31] By century's end, synthetic alternatives and firearms supplanted birdlime in permitted hunting, while outright prohibitions—coupled with cultural reevaluation of trapping ethics—confined its remnants to marginal or illicit operations in southern Europe and beyond.[4]Manufacturing Processes
Traditional Preparation Techniques
Traditional birdlime was predominantly prepared from the inner bark of holly (Ilex aquifolium), harvested from young shoots during midsummer, typically June or July, when the bark could be easily stripped.[11][32] The stripped bark was first steeped in water for several days to initiate fermentation, allowing it to soften and partially decompose into a slimy consistency.[33] This step facilitated the breakdown of cellular structures, releasing viscous compounds essential for adhesiveness. Following fermentation, the bark underwent prolonged boiling in water—typically 6 to 12 hours—until it became tender and the liquor thickened.[11] The boiled mass was then pressed to extract excess water, and the residue was stored in a moist environment for 8 to 14 days to further ferment, enhancing stickiness through microbial action and pectin release. After this, it was pounded into a fibrous paste, repeatedly washed in fresh water to remove bitter tannins and impurities, and finally kneaded with small amounts of nut oil, turpentine, or animal fats to achieve a malleable, elastic texture suitable for application.[11] Alternative traditional recipes incorporated mistletoe (Viscum album) berries, whose viscid pulp was crushed or chewed to form sticky strands, often mixed with bark-derived lime for potency.[10] In some variants, slippery elm bark substituted holly in North American contexts, boiled similarly to yield a mucilaginous base.[10] These methods relied on natural polymers like polysaccharides for adhesion, with preparation emphasizing empirical adjustments for environmental humidity and seasonal sap content to ensure efficacy in trapping small birds.[1]Regional Variations in Production
In Europe, traditional birdlime production frequently utilized the inner bark of holly (Ilex aquifolium), which was stripped from young shoots, boiled for 10 to 12 hours, and allowed to ferment before being combined with fats such as goose fat to achieve the desired viscosity. Mistletoe (Viscum album) berries served as another key source, crushed and boiled to extract viscid juice, a method documented by Pliny the Elder in the 1st century CE as a means to produce the adhesive for trapping birds.[34] Regional differences within Europe included variations like the German approach of simmering linseed oil with nut oil and turpentine to form a glue-like paste, often applied to twigs or straw. In Africa, production methods emphasized latex-rich plants adapted to local ecosystems, with South African traditions recording twelve species across families such as Apocynaceae, Celastraceae, Euphorbiaceae, Loranthaceae, Moraceae, and Sapotaceae, where sap was harvested and processed into sticky traps for small birds.[35] West African practices similarly relied on vegetal saps from various trees, applied to branches during migratory seasons to capture songbirds, reflecting a continuity from antiquity across the continent. In Zambia, indigenous systems incorporated bark and resin mixtures boiled into adhesives, varying by ethnic group and available flora for subsistence hunting.[36] Across Asia, birdlime was commonly derived from the sap of banyan trees (Ficus spp.), particularly in regions like western Myanmar, where Chin hunters collected viscous latex during the dry season from December to May, boiling and straining it into a tanglefoot compound smeared on perches.[1] This Ficus-based method extended broadly through Asia and into Mediterranean-adjacent areas, differing from European bark ferments by prioritizing fresh sap extraction without extensive boiling, suited to tropical availability.[17] In parts of Southeast Asia, trees like Ilex integra provided bark alternatives, processed similarly to holly but yielding a more elastic adhesive for humid climates.[3]Modern or Industrial Adaptations
In the early 20th century, British manufacturers like Kay Brothers Ltd. in Stockport industrialized birdlime production, processing it into tins for commercial adhesives and household glues, diverging from traditional plant-based artisanal methods. This adaptation leveraged mechanized extraction and mixing to achieve consistent viscosity and shelf stability, enabling wider distribution beyond localized trapping.[37] A notable wartime application occurred during World War II, when birdlime was repurposed as the adhesive coating for the British No. 74 ST grenade, known as the sticky bomb. Developed in 1940–1941 by Major Millis Jeffris and engineer Stuart Macrae, the device consisted of a nitroglycerin-filled sphere encased in stockinette saturated with birdlime to ensure adhesion to tank hulls upon throwing. Kay Brothers supplied the material, facilitating scalable production under Ministry of Supply contracts. This represented a tactical shift from bird capture to anti-armor weaponry, exploiting birdlime's tacky properties for non-biological immobilization.[37][2] Postwar, industrial birdlime use waned as petroleum-derived synthetic adhesives—such as polyisobutylene-based glues—offered superior durability, weather resistance, and cost-efficiency, rendering natural variants obsolete for most applications. By the late 20th century, birdliming for avian trapping faced bans in industrialized nations due to animal welfare concerns, curtailing any residual commercial viability; modern equivalents in pest control favor non-adhesive methods like netting or electrocution for birds, while glue traps persist mainly for rodents.[2][4]Practical Applications
Bird Capture Methods
Birdlime capture methods involve applying the adhesive substance to natural or artificial perches to entangle birds passively upon contact. The material is typically smeared onto branches, twigs, or poles in habitats frequented by small songbirds or other target species, where landing birds adhere via their feet and feathers, preventing flight or escape.[2][38] A standard technique employs a tethered decoy bird, chained to the limed perch to vocalize and lure conspecifics into the trap.[3][10] Multiple limed twigs may be networked together to increase capture efficiency, as directed in historical ornithological guides.[21] In traditional applications, such as those documented in Western Myanmar, birdlime derived from plants like Holarrhena pubescens is coated onto bamboo sticks or branches, binding birds to the substrate and immobilizing feathers for easy retrieval.[1] Captured birds are often removed by rubbing the adhesive with flour to preserve plumage integrity, though this risks incomplete cleaning.[3] These methods, established since ancient Rome, Greece, and Egypt, targeted wild birds for food or sport and persisted in regions like Britain until the late 19th century.[5][26] Effectiveness relies on the adhesive's viscosity, which must balance stickiness with weather resistance to avoid premature hardening or dissolution.[5]Agricultural and Pest Control Uses
Birdlime has been employed in agricultural settings primarily to deter and capture granivorous and frugivorous birds that damage crops such as cereals, rice, and fruits. In regions where bird pests pose significant threats to yields, sticky branches or poles coated with birdlime are strategically placed near fields or perches to entangle landing birds, reducing foraging pressure on growing plants. This method targets species like the red-billed quelea (Quelea quelea), which can devastate millet and sorghum crops in sub-Saharan Africa by consuming seeds during maturation.[39][40] In Philippine rice paddies, experiments conducted in the late 1970s involved applying birdlime to branches elevated 15 to 20 cm above the crop canopy, effectively trapping pest birds without widespread chemical use. Farmers in the Mascarenes have similarly applied birdlime to safeguard orchards and fields from invasive red-whiskered bulbuls (Pycnonotus jocosus), which strip fruits and buds, achieving localized control through adhesive entrapment on perches. These applications leverage birdlime's passive nature, requiring minimal labor beyond placement and periodic renewal, though efficacy depends on bird behavior and environmental factors like wind or rain diluting the adhesive.[41][42] Traditional formulations, often derived from local resins or plant saps, are smeared onto twigs or stakes positioned at roosting or feeding sites adjacent to crops, sometimes augmented with decoys to attract targets. In West African contexts, vegetal birdlimes have historically supplemented scaring tactics for cereal protection, capturing flocks during peak damage periods such as seed-setting stages. Despite its simplicity and low cost—making it viable for smallholder farmers in developing regions—use has declined due to alternatives like netting or avicides, though it persists in subsistence agriculture where modern tools are inaccessible.[43][44]Non-Avian and Historical Alternative Uses
Birdlime has been employed historically for trapping small mammals such as rats and mice, leveraging its adhesive properties to coat surfaces in domestic settings. A 1928 account describes its application on wire netting or other substrates to capture these pests indoors, serving as an alternative to mechanical traps.[45] In ancient military contexts, birdlime was recommended as a fire-retardant coating for wooden structures vulnerable to incendiary attacks. The 4th-century BCE tactician Aeneas Tacticus advised smearing birdlime on timber to inhibit flame spread, often in combination with vinegar or other mixtures like blood and ashes, to protect fortifications during sieges. During World War II, birdlime provided the adhesive coating for the British No. 74 "sticky bomb," a handheld anti-tank grenade developed in 1940 for infantry use against armored vehicles. The explosive sphere, encased in stockinette saturated with birdlime, was designed to adhere to tank surfaces upon impact before detonation, addressing the need for low-technology anti-armor weapons after early war losses. Production exceeded 2.5 million units by 1943, though field effectiveness was limited by the adhesive's vulnerability to dirt and user error.[46] Folk medicinal applications included using birdlime derived from mistletoe berries as a topical poultice for skin conditions. In traditional European herbalism, the viscid residue was applied directly to ulcers and open sores to promote healing, as documented in early 20th-century compilations of country remedies.[47]Ethical, Legal, and Welfare Considerations
Animal Welfare Debates and Evidence
Birdlime trapping involves applying adhesive substances to perches or branches, causing birds to become entangled upon landing, which binds their feathers and prevents flight. This method often results in prolonged struggle, leading to physical exhaustion, feather loss from self-plucking, and injuries such as torn skin or broken limbs as birds attempt to free themselves.[48][49] Animal welfare advocates, including the RSPCA, argue that such entrapment induces acute stress, panic, and potential toxicity from industrial glues or solvents used for removal, with birds sometimes succumbing to dehydration, hypothermia, or secondary infections before retrieval.[50][51] Empirical evidence from field incidents supports claims of high mortality and suffering; for instance, in 2018, six wild birds including blue tits and a great tit were found dead in unauthorized birdlime traps at a UK nature reserve, having become ensnared while feeding.[50] Similarly, reports from France prior to the 2020 glue trap ban documented birds enduring hours or days of entrapment, with non-target species like protected thrushes suffering unintended capture and harm.[48] Analogous studies on rodent glue traps, prohibited in regions like Scotland due to welfare concerns, indicate that adhesive methods cause comparable distress, with animals exhibiting self-mutilation and extended time-to-death averaging 12-52 hours in unobserved cases.[52] While peer-reviewed avian-specific data on birdlime remains limited, these parallels and documented fatalities underscore causal links between adhesive entrapment and welfare compromise, independent of handler intervention frequency.[5] Debates persist between conservationists and traditional practitioners; welfare organizations contend the method is inherently inhumane due to unpredictable capture durations and risks to non-target species, advocating bans as in the EU's 1979 directive on bird protection.[51] In contrast, some subsistence hunters in regions like Myanmar or pre-ban France assert that prompt checking of traps—within hours—minimizes suffering, positioning birdlime as a low-impact alternative to shooting for food or songbird harvesting, though evidence of compliance is anecdotal and contested by inspectors reporting abandoned traps.[48][1] Critics of welfare claims, including some rural stakeholders, highlight potential overstatement by advocacy groups, noting that immediate dispatch post-capture can align with quick-kill standards in other trapping, yet verifiable data on average struggle duration remains scarce, complicating neutral assessment.[52]Legal Regulations and Bans
The use of birdlime to capture wild birds is prohibited in numerous jurisdictions worldwide, driven by animal welfare concerns over its non-selective and protracted suffering-inducing nature, as well as biodiversity protection imperatives under international conservation frameworks.[5] In the European Union, Directive 2009/147/EC on the conservation of wild birds bans methods that indiscriminately harm protected species, with the European Court of Justice ruling in 2021 that glue-trapping, including birdliming, contravenes these provisions due to its inability to target specific quarry without bycatch.[53] [54] France, previously granting regional derogations for thrush and blackcap hunting in southeastern departments (authorizing up to 42,000 birds annually as late as 2019), enacted a nationwide ban on birdlime use effective June 2021, following a five-year legal challenge by conservation groups and EU infringement proceedings.[51] [55] In the United Kingdom, Section 5 of the Wildlife and Countryside Act 1981 expressly forbids employing bird-lime or analogous sticky substances to kill or take wild birds, classifying it among prohibited methods alongside poisons and certain nets.[56] This aligns with broader UK enforcement against illegal trapping, as evidenced by police operations dismantling lime-stick setups targeting songbirds like finches for the pet trade.[57] Portugal reinforced EU standards in 2021 by prohibiting not only the use but also the commercial sale of lime-sticks and similar indiscriminate devices.[58] Cyprus banned limesticks in 1974 as part of measures against songbird poaching, though illegal practices continue amid organized crime involvement.[59] In the United States, while no federal statute singles out birdlime, its application to migratory species—encompassing most songbirds—violates the Migratory Bird Treaty Act of 1918, which outlaws unauthorized capture or killing, with state-level trapping regulations further restricting unpermitted adhesive methods.[60] Globally, birdliming remains legal in select non-EU developing regions for subsistence, but international treaties like the Convention on Migratory Species indirectly pressure bans by prioritizing humane alternatives.[5] Enforcement gaps persist, with reports of clandestine operations in Mediterranean hotspots despite penalties, underscoring tensions between tradition and ecological mandates.[61]Cultural and Subsistence Perspectives
In indigenous and rural communities across Asia and Africa, birdlime serves as a cornerstone of traditional subsistence strategies for capturing small birds, which provide essential dietary protein in environments with limited alternative resources. Hunters apply the adhesive to branches, twigs, or poles, exploiting birds' natural perching behaviors to enable passive trapping that requires minimal equipment and vigilance, allowing integration with other foraging or farming activities. This method, reliant on local botanical knowledge of viscous plant saps, has sustained households for generations, particularly during lean seasons when larger game is scarce.[1] Among the Chin people of western Myanmar's Chin Hills, birdlime is prepared by collecting and boiling sap from Ficus species during the dry season (December–May), yielding a malleable adhesive used to trap passerines like the endemic Burmese yuhina (Yuhina ganeesa), which are eaten or sold locally to supplement income.[1] In southern Africa, traditional birdlime production draws from plants such as Euphorbia and Commiphora genera, facilitating bird capture for food, medicine, and rituals, thereby embedding the practice in broader cultural and survival frameworks. West African communities similarly employ vegetal-derived birdlimes, a technique with ancient roots, to harvest birds amid diverse ecosystems, underscoring its role in maintaining food security through low-impact, knowledge-intensive hunting.[62] These subsistence applications highlight birdlime's cultural embeddedness, where mastery of preparation—often involving boiling to concentrate adhesiveness—and application reflects intergenerational transmission of ecological expertise. While yields are modest, typically dozens of birds per session, they contribute meaningfully to nutrition in protein-deficient diets, with cultural narratives sometimes framing the practice as harmonious with natural cycles rather than exploitative. Historical ethnographic depictions, such as those from Panama's indigenous groups, further illustrate parallel traditions in the Americas, where birdlime poles targeted small fowl to bolster communal larders.[1]Environmental and Ecological Impacts
Resource Extraction Effects
Traditional production of birdlime relies on extracting latex, sap, or bark from specific plants, primarily in small-scale, localized operations. In Europe, historical methods involved stripping bark from holly trees (Ilex aquifolium), typically during midsummer, followed by soaking and boiling to yield the adhesive viscid matter; this process removes the protective outer layer, potentially girdling young trees and impairing regeneration if harvesting encircles the trunk fully. Similarly, mistletoe (Viscum album) berries were crushed and processed, drawing from parasitic plants that already stress host trees through nutrient diversion, though berry collection itself targets fruit rather than structural tissue. In tropical regions, such as western Myanmar, sap is tapped from banyan figs (Ficus spp., including F. benghalensis and F. infectoria) by incising shallow grooves into the cambium layer during the dry season (December–May), channeling the latex into containers for boiling; the cambium, vital for radial growth, risks scarring and reduced vigor in heavily tapped trees.[63][1] Ecological effects of these extractions remain underdocumented, with no peer-reviewed studies identifying widespread deforestation, species decline, or habitat alteration attributable to birdlime production. Holly bark harvesting, while capable of killing individual saplings due to thin, fire-vulnerable bark, occurred in abundant woodland understories where holly regenerates via coppicing or seeding, precluding evidence of population-level depletion in pre-industrial contexts. Mistletoe berry picking may incidentally limit seed dispersal—normally bird-mediated—potentially slowing parasitic spread, but mistletoe populations are resilient as keystone resources supporting avian frugivores, and harvesting volumes were historically low. Sap tapping in figs, analogous to rubber extraction, induces wound responses that can lead to localized dieback or fungal entry if incisions are deep or frequent, yet Ficus species' modular growth and prolific seeding mitigate long-term damage in subsistence-scale operations; sustainability assessments in Myanmar emphasize bird trapping impacts over plant resource strain, noting unclear population effects without quantitative harvest data.[64][65][1] Overall, resource extraction for birdlime has not been linked to significant biodiversity loss or ecosystem disruption, likely due to its artisanal nature and reliance on common, resilient species rather than rare endemics. Unlike large-scale commodity harvests (e.g., timber or latex for industry), birdlime demands remain niche and sporadic, favoring rotational or opportunistic collection that aligns with natural renewal cycles. However, in regions with intensifying subsistence pressures, unregulated tapping could exacerbate vulnerability in fragmented habitats, underscoring the need for monitoring cambium recovery rates and tree mortality thresholds, though no such escalations have been empirically verified to date.[1]Non-Target Species and Biodiversity Risks
Birdlime, as a passive adhesive trap applied to branches or perches, indiscriminately captures any bird that alights on treated surfaces, leading to significant bycatch of non-target avian species. In Natma Taung National Park, Myanmar, surveys indicate that 186 of 291 occurring bird species (63.9%) are vulnerable to birdlime due to its non-selective mechanism, which entangles flight feathers and prevents escape regardless of species.[1] This vulnerability extends to protected, endemic, and migratory birds, including those not intended for harvest, such as raptors and small passerines lured by calls or natural foraging.[66] Non-avian non-target species, including small mammals, reptiles like lizards, and insects, have also been documented as victims when traps are deployed in diverse habitats, exacerbating unintended mortality.[67] In regions with illegal birdliming, such as the Mediterranean and Cyprus, raptors like owls and kestrels are frequently captured as bycatch and discarded, with over one-third of affected birds in some operations being non-target.[68] The adhesive's persistence and toxicity—particularly in synthetic variants—often result in prolonged suffering, feather damage impairing waterproofing, and secondary effects like starvation or predation vulnerability for survivors.[69] These practices pose broader biodiversity risks by contributing to population declines of vulnerable species, disrupting migratory flyways, and reducing ecological roles such as seed dispersal and pest regulation. In the Mediterranean, limestick use has been linked to the trapping of an estimated 345,000 birds across surveyed areas in autumn 2022 alone, many non-target, amplifying pressures on already threatened populations.[70] Conservation assessments highlight that such indiscriminate harvesting in biodiversity hotspots like Indo-Burma can lead to unsustainable offtake, with incidental mortalities hindering recovery of endemic avifauna.[71] European Court rulings have cited these bycatch issues as grounds for prohibiting glue-based methods, underscoring their incompatibility with maintaining viable bird communities.[54]Sustainability Assessments
Traditional birdlime production primarily involves harvesting natural resins or saps from plants such as Ficus species (e.g., banyan trees) or mistletoe berries (Viscum album), which are boiled to extract adhesive properties, requiring minimal energy and no synthetic chemicals. This process leverages renewable botanical resources, with Ficus sap collection akin to non-lethal tapping methods that allow tree regeneration, suggesting low depletion risk in abundant native habitats.[66] Mistletoe, a hemiparasitic plant, reproduces via bird-dispersed seeds and maintains ecosystem roles as a keystone species supporting biodiversity, indicating that selective berry harvesting at subsistence levels unlikely disrupts its persistence.[65] Formal life-cycle assessments or quantitative sustainability metrics for birdlime remain scarce, with no peer-reviewed studies identifying significant environmental burdens from production itself, such as greenhouse gas emissions or waste generation, due to its localized, low-tech nature. In contrast to petroleum-derived adhesives, birdlime avoids fossil fuel dependency, potentially yielding a lower carbon footprint, though empirical data on boiling fuel sources (e.g., wood) in traditional contexts is absent. Regional ethnobotanical records from South Africa document 12 plant species used for birdlime without reported overexploitation, underscoring cultural practices' alignment with resource availability.[72] Conservation-focused evaluations highlight indirect sustainability challenges tied to application rather than manufacture; for instance, in Western Myanmar's Chin Hills, birdlime from Ficus sap enables high-yield trapping (over 200 birds per day per hunter), prompting calls for assessments linking off-take rates to avian recruitment and survivorship to ensure population viability, particularly for endemics like the white-browed nuthatch (Sitta victoriae).[66] Such monitoring could inform thresholds for sustainable harvest, integrating local knowledge to balance ecological integrity with subsistence needs, absent which scaling could exacerbate biodiversity risks.[66]Alternatives and Contemporary Relevance
Modern Substitutes for Trapping
Synthetic adhesives, such as commercial rat glues and petroleum-based compounds, have largely supplanted traditional natural birdlime in regions where sticky trapping persists, offering easier application without the need for labor-intensive preparation from plant sources like mistletoe berries.[17] These modern glues are widely available, inexpensive, and effective at entangling birds upon contact with coated branches or twigs, though they raise similar animal welfare concerns as historical variants due to prolonged stress and injury from adhesion.[5] In Myanmar, for instance, trappers favor rat glue for capturing small birds because it requires no boiling or extraction processes, enabling rapid deployment during migration seasons.[17] For scientific banding and population studies, mist nets—fine-mesh nylon nets erected in flight paths—serve as a primary non-adhesive substitute, minimizing plumage damage and mess compared to sticky methods while allowing quick release of captured birds.[73] These nets, deployed since the mid-20th century, enable researchers to handle thousands of individuals annually with lower mortality rates, as evidenced by standardized protocols from organizations like the Bird Banding Laboratory, which report recapture rates exceeding 5% for many species without adhesive-related feather loss.[73] In pest control contexts, such as agricultural bird damage mitigation, funnel traps and impact devices provide targeted alternatives, capturing species like starlings or quelea without widespread adhesion, though efficacy varies by flock size and habitat; for example, Modesto funnel traps have demonstrated up to 80% capture rates in controlled field tests for invasive birds.[41] These mechanical substitutes prioritize selectivity and reusability, reducing non-target captures observed in glue-based systems, where smaller mammals or insects often suffer incidentally.[41] Despite these advances, sticky synthetics remain in use illegally in some areas for songbird poaching, underscoring ongoing enforcement challenges.[38]Ongoing Uses in Developing Regions
In West Africa, birdlime remains a traditional method for trapping birds, primarily for subsistence food and supplemental income, particularly in rural and forested areas where modern alternatives are limited. In Nigeria, hunters in locations such as Ebbaken-Boje in the Mbe Mountains apply birdlime derived from Ficus platyphylla latex, heated or chewed and smeared on dummy bird heads or yam-based traps, targeting species like barn swallows (Hirundo rustica), with estimates of up to 200,000 individuals captured annually at single sites for local consumption or sale to fund education.[62] Similar practices occur in Ghana's Ashanti region and lower Volta River areas, where Landolphia owariensis latex is tapped, coagulated with lime juice or saltwater, and applied to branches to catch small passerines for food.[62] In Liberia and Côte d'Ivoire, fruit pulp from trees like Tieghemella heckelii or Landolphia membranacea sap mixed with lemon juice is heated and spread on sticks near streams or baited with termites, capturing dozens to hundreds of birds per session, including little greenbuls and raptors, often for pest control on rice farms or as protein sources.[62] In Southeast Asia, indigenous communities in western Myanmar's Chin Hills continue using birdlime prepared from banyan (Ficus spp.) sap, boiled during the dry season (December–May) into a sticky compound called "nghet phan te kaw," applied to sticks at waterholes, fruiting trees, or baited with insects to passively trap birds.[66] Hunters in Natma Taung National Park report capturing over 200 birds per day across 186 species, serving local food needs in remote, subsistence-based households where alternatives like firearms are restricted or unavailable.[66] These methods persist due to cultural traditions and economic necessity, though they incidentally affect vulnerable endemics like the white-browed nuthatch (Sitta victoriae).[66] In rural India, birdlime is applied to dome-shaped traps or branches using plant-derived adhesives to capture birds destined for immediate consumption, as the substance damages plumage, rendering captives unsuitable for live trade; this practice supplements diets in areas with limited access to commercial poultry.[74] Across these regions, birdlime's low cost and reliance on locally abundant plant materials sustain its use amid poverty and weak enforcement of wildlife protections, contrasting with phased-out applications in more developed economies.[62][66]Scientific and Research Applications
Birdlime, derived primarily from the viscous extracts of mistletoe (Viscum album) and other plants, has been examined in materials science for its bioadhesive properties, which enable passive entrapment through entanglement and adhesion to substrates. A 2022 study in PNAS Nexus analyzed mistletoe viscin—the key adhesive component of traditional birdlime—as a cellulose-based material exhibiting hygro-responsive (moisture-sensitive) and mechano-responsive behaviors, where hydration triggers reversible stiffening and adhesion via mucilage hydration and protein cross-linking. This research highlights birdlime's potential as a model for developing stimuli-responsive hydrogels and smart adhesives in biomedical and engineering applications, such as self-healing materials or environmentally adaptive glues, due to its natural renewability and non-toxic composition compared to synthetic alternatives.[75] Ethnobotanical studies have documented plant species and preparation methods for birdlime to catalog traditional knowledge and assess sustainability of resource extraction. In South Africa, a 2020 analysis identified 22 plant taxa, including Euphorbia and Acacia species, used for birdlime production, evaluating their chemical yields and efficacy in trapping small birds, with implications for conserving overharvested species amid declining traditional practices.[35] Similarly, a 2012 investigation in western Myanmar detailed the multi-step boiling and straining process from Coix lacryma-jobi seeds, quantifying adhesive longevity (up to months in storage) and its role in capturing over 20 bird species, informing models of habitat-specific trapping efficiency.[1] In conservation biology, birdlime serves as a case study for evaluating non-selective trapping's ecological impacts, with field surveys quantifying capture rates and feather damage to inform population viability analyses. Research in Myanmar linked birdlime use to annual captures exceeding 1,000 individuals per site, posing risks to endemic species like the Burmese bushlark (Mirafra microptera), where adhesive binding impairs flight recovery and increases predation vulnerability, prompting calls for targeted bans based on empirical trap success data.[17] Historical adhesive entrapment reviews, spanning ancient practices to modern glue boards, use birdlime as a baseline to model entrapment mechanics, revealing consistent patterns of scale-dependent efficacy (e.g., higher success on perches versus ground scatters) across taxa.[5]References
- https://en.wiktionary.org/wiki/birdlime