Hubbry Logo
search
logo
Compression lock avatar
Compression lock
Compression lock
current hub
1873891

Compression lock

logo
Community Hub0 Subscribers
Read side by side
Compression lock
View on Wikipedia
from Wikipedia

A compression lock, muscle lock, muscle slicer or muscle crusher, is a grappling hold that causes severe pain by pressing a muscle into a bone. A compression lock can cause a joint lock in a nearby joint when it is applied by squeezing a limb over a fulcrum. A forceful compression lock may damage muscles and tendons, and if accompanied by a joint lock, may also result in torn ligaments, dislocation or bone fractures. Compression locks can be used as pain compliance holds, and are sometimes featured in combat sports as submission holds.

Key Information

Achilles lock

[edit]
Further information: Ashi-Hishigi

An Achilles lock (also called an Achilles hold or Achilles squeeze or Ashi-Hishigi in judo) is a compression lock that involves pressing the Achilles tendon into the back of the ankle or lower leg. It is typically performed by wedging a forearm, especially a bony part of it, into the Achilles tendon, while leveraging the foot and the leg over the forearm serving as a fulcrum. This causes severe pressure on the Achilles tendon, and often also results in an ankle lock, since the ankle is being used as a point of leverage. Similarly, some ankle locks also cause a compression lock on the Achilles tendon, and hence the term "Achilles lock" is often also used to describe such ankle locks.

Biceps slicer

[edit]

A biceps slicer (also called a biceps lock or biceps crusher) is a compression lock that involves pushing the biceps into the humerus. An effective biceps slicer can be applied by putting an arm or leg as a fulcrum on the opponent's arm at the inside of the arm by the elbow, and flexing the opponent's arm over the fulcrum. This will result in the biceps and forearm being pressed into the fulcrum. The biceps slicer becomes most effective as a compression lock when the bony parts of the limb such as the shin or any of the bones in the forearm are forced into the biceps of the opponent. The biceps slicer can also become a potent armlock when it is applied in this manner, because the leverage causes an elongating and separating tension in the elbow joint, making this a legal technique in judo competition.[1] In Brazilian jiu-jitsu competitions however, the biceps slicer is an illegal technique in lower level divisions of some major tournaments.[2] In catch wrestling biceps slicer variation is called short-arm scissors.

Leg slicer

[edit]

A leg slicer (depending on the affected muscle also called for instance calf slicer or thigh crusher) is a compression lock that involves pressing the calf and/or thigh muscle into one of the bones in the leg. Similarly to the biceps slicer, a leg slicer can be applied by inserting an arm or leg in the backside of the knee, and flexing the opponent's leg to apply pressure to the muscles surrounding the fulcrum. Generally, the direction of the shin in the leg acting as a fulcrum will determine where the larger part of the pressure will go. Such leg slicers can be used as effective leglocks to the knee through a separating and elongating motion.[3] Similarly to the biceps slicer, the calf slicer is listed as a banned technique in the lower levels of some major Brazilian jiu-jitsu competitions.[2]

In professional wrestling, wrestlers AJ Styles uses this as a submission finisher move, calling it the Calf Killer in NJPW and TNA and the Calf Crusher in WWE while Zack Sabre Jr. mostly uses it as a move to transition into a Banana split.

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Compression lock

View on Grokipedia
from Grokipedia
A compression lock is a submission technique in grappling martial arts, such as Brazilian jiu-jitsu (BJJ) and submission wrestling, that applies targeted pressure to compress an opponent's muscle or tendon against an underlying bone, thereby generating severe pain and risking soft tissue damage without necessarily hyperextending the joint.[1][2] Unlike joint locks, which manipulate joints through extension or rotation to target ligaments and cartilage, or chokes that impede blood flow or breathing, compression locks focus on crushing soft tissues to force submission, making them particularly effective in close-range, no-gi scenarios where friction from clothing is absent.[3][1] Common examples include the bicep slicer, which squeezes the biceps against the humerus; the calf slicer, targeting the gastrocnemius against the tibia or fibula; and the Achilles lock, compressing the Achilles tendon against the ankle bone.[2][3] These holds are staples in no-gi competitions and training but face restrictions in gi-based rulesets; for instance, under International Brazilian Jiu-Jitsu Federation (IBJJF) guidelines, bicep and calf slicers are illegal for white, blue, and purple belts in both gi and no-gi divisions, though higher belts may employ them in no-gi with fewer limitations.[2][4] Compression locks trace their origins to traditional grappling systems like judo, sambo, and catch wrestling, where similar muscle-crushing techniques were used for control and submission before being integrated into modern BJJ during the 20th century.[2] Their resurgence in contemporary grappling stems from evolving competition rules that favor versatile, high-percentage attacks, emphasizing the need for practitioners to train them cautiously to avoid injury while enhancing overall defensive awareness.[1]

Definition and Characteristics

Definition

A compression lock, also known as a muscle lock, muscle slicer, or muscle crusher, is a grappling hold that causes severe pain by pressing a muscle or tendon against a bone.[5][2] This technique induces submission primarily through intense localized pain from the compression, without necessarily hyperextending or manipulating joints.[6][1] When applied with full force, it can damage muscles and tendons, potentially leading to tears, and in severe cases, may cause fractures or dislocations.[5][7] Compression locks are categorized as a type of submission hold in grappling arts such as Brazilian jiu-jitsu, distinct from chokes, which restrict blood flow or airflow, and joint manipulations, which target joint hyperextension or rotation.[3][1]

Distinction from Other Submission Holds

Compression locks differ from joint locks primarily in their mechanism of action, as they apply pressure to compress muscles or tendons against underlying bones, generating pain through soft tissue deformation rather than hyperextending or hyperflexing a joint beyond its natural range of motion.[1][8] Joint locks, by contrast, isolate and manipulate specific joints—such as the elbow in an armbar or the knee in a kneebar—to exploit skeletal vulnerabilities and force structural compromise, often leading to ligament or tendon tears if resisted.[8] This distinction positions compression locks as a pain-compliance technique focused on muscular distress, while joint locks emphasize mechanical joint failure, making the former quicker to apply in dynamic scenarios but potentially less debilitating long-term.[1] Unlike chokes, which restrict blood flow to the brain via carotid artery compression or impede airflow through tracheal constriction, compression locks induce submission exclusively through localized muscular agony without affecting vascular or respiratory systems.[8] For instance, a bicep slicer compresses the biceps muscle against the humerus bone, creating intense pressure that prompts tapping due to pain thresholds, whereas a rear-naked choke targets the neck's major arteries to cause rapid unconsciousness in 3-5 seconds.[1][8] This separation highlights compression locks' reliance on somatic nerve stimulation rather than systemic physiological disruption, allowing them to function effectively on limbs distant from vital areas. Compression locks also avoid the spinal column manipulation characteristic of spinal locks, instead concentrating force on peripheral limbs to prevent risks associated with vertebral misalignment or nerve impingement in the torso or neck.[8] Spinal locks, such as the twister, torque the spine to exceed its rotational limits, potentially causing severe, irreversible damage to intervertebral discs or the spinal cord, which is why they are often prohibited in competitions.[8] In taxonomy, compression locks fall under a distinct category of submission holds centered on muscle compression, separate from joint manipulations, positional controls like pins, or striking integrations, emphasizing their role in limb-specific pain induction within broader grappling frameworks.[1][8]

Mechanics and Application

Biomechanical Principles

Compression locks function through the biomechanical principle of leverage, utilizing an opponent's body part—such as a forearm or shin—as a rigid applicator to create compressive force on a targeted muscle against an underlying bone, effectively trapping the soft tissue in a vice-like mechanism. This setup relies on the physics of levers, where the bone serves as a fixed fulcrum, allowing the practitioner to amplify force through body positioning and extension without relying on joint hyperextension or rotation typical of other submissions.[9] Anatomically, the pressure exerted on the muscle fibers disrupts local blood flow, inducing ischemia that leads to the accumulation of metabolic byproducts such as lactic acid and the release of adenosine triphosphate (ATP), which sensitize and activate nociceptors to produce acute pain. This compressive action can also mechanically stimulate nearby nerves, further contributing to the pain response by directly impinging on neural structures within or adjacent to the compressed tissue.[10][11] In terms of force dynamics, the hold generates targeted torque and pressure at precise points along the muscle, focusing the load perpendicular to the tissue without rotational joint manipulation, which maximizes the compressive effect on the muscle belly. Resistance to the hold intensifies this pressure, potentially causing micro-tears in muscle fibers due to the sustained mechanical stress.[1] Conceptually, the mechanism can be visualized as a sandwich configuration: the pliable muscle layer is squeezed between the unyielding bone base and the applicator surface, deforming the tissue and eliciting rapid submission through overwhelming discomfort.[1]

Execution and Targeting

Applying a compression lock begins with establishing dominant control over the opponent to prevent escapes or counters. This typically requires securing a stable position, such as a guard, mount, or pin, which isolates the targeted limb and limits the opponent's mobility. For instance, from bottom side control or a failed armbar attempt, the practitioner can transition into the lock by trapping the opponent's arm or leg against their own body.[1][2] Once control is achieved, the execution involves several sequential steps: first, position the opponent to expose the target area, such as by pinning a limb with the body or limbs; second, isolate the limb by wrapping or encircling it with an arm or leg to restrict movement; third, introduce a fulcrum—often the forearm, wrist, or shin—placed against the muscle or tendon to create leverage; and finally, gradually increase pressure by arching the back, stacking the body, or squeezing to compress the tissue against the underlying bone. This methodical application allows for progressive pain induction, giving the opponent an opportunity to submit before injury occurs.[2][1][7] Common targeting areas for compression locks include the muscles and tendons of the limbs, particularly the calves, biceps, thighs (such as hamstrings), and the Achilles tendon region, where the compression exploits soft tissue vulnerability against bony structures. These sites are chosen for their susceptibility to pain from neural or muscular compression without necessarily hyperextending joints.[2][1][7] Grip variations enhance leverage and control during application; a straight grip, such as wrapping the arm directly around the limb, provides simplicity and direct pressure, while a figure-four configuration—where the limb forms a locked triangle for added stability—offers greater mechanical advantage, especially in leg-based locks from positions like ashi garami or X-guard. The choice depends on the setup and the practitioner's positional dominance.[2][1]

History and Development

Origins in Traditional Grappling

Compression locks trace their roots to traditional Japanese grappling arts, particularly jujutsu, where techniques like ashi-hishigi—known as the Achilles press—targeted the ankle and lower leg for compression and control. This hold was incorporated into the early Kodokan judo curriculum established by Jigoro Kano in the late 19th century, reflecting jujutsu's influence on judo's foundational submission techniques.[12] In the United Kingdom and United States, catch wrestling traditions during the early 1900s developed a range of submission holds, including limb-control techniques, as part of carnival athletic shows where wrestlers challenged locals with brutal holds. These evolved from Lancashire catch-as-catch-can styles that prioritized ground-based submissions over pins.[13] Similar limb control methods appear in other historical grappling systems. Soviet sambo, developed in the 1920s and 1930s, incorporated leg locks including Achilles locks for submission, blending elements from judo and folk wrestling. Indian pehlwani (kushti) and Chinese shuai jiao employed pressure and joint techniques to immobilize opponents' extremities, focusing on throws and control in bouts and military training. Key documentation of these elements came from judo master Kyuzo Mifune in his 1956 publication The Canon of Judo, which formalized ashi-hishigi and related compression techniques within Kodokan's ne-waza (ground techniques), preserving their traditional applications for educational purposes.[14]

Modern Adoption in Combat Sports

In the 1990s, compression locks gained traction within Brazilian jiu-jitsu (BJJ) as the Gracie family adapted and expanded techniques from judo, incorporating leg-based submissions to complement their ground-fighting emphasis. Early BJJ, shaped by Hélio Gracie's modifications for leverage over strength, initially de-emphasized leg locks due to perceived risks and a focus on upper-body control, but practitioners like Renzo and Royler Gracie integrated compression holds such as Achilles locks and calf slicers during this period to address gaps in no-gi scenarios. This evolution was influenced by cross-training with judo's ashi-waza and exposure to vale tudo challenges, allowing compression locks to transition from niche tools to viable options in Gracie academies by the late 1990s.[15] The adoption of compression locks extended into mixed martial arts (MMA) following the inaugural UFC event in 1993, where no-holds-barred rules initially permitted a wide array of submissions, including leg slicers and Achilles locks. Fighters like Kazushi Sakuraba exemplified their effectiveness in high-profile bouts, notably submitting Shannon Ritch via Achilles lock at Pride 11 in 2000, showcasing how compression techniques could neutralize larger opponents in open-weight formats. These applications in promotions like UFC and Pride highlighted compression locks' speed and pain compliance, influencing MMA grapplers to incorporate them as counters to takedown defenses post-1993.[16] Submission grappling tournaments, particularly the Abu Dhabi Combat Club (ADCC) starting in 1998, accelerated the strategic development of compression locks, with leg slicers emerging as key weapons in no-gi divisions. Competitors like Royler Gracie employed calf and Achilles variations during his three consecutive ADCC titles from 1999 to 2001, demonstrating their utility in prolonged scrambles and turtle positions. By the mid-2000s, ADCC matches routinely featured compression finishes, establishing them as essential for elite grapplers seeking rapid submissions without gi grips. Cultural perceptions of compression locks shifted dramatically by the 2010s, evolving from historically restricted techniques in gi-based BJJ to widely accepted staples in no-gi competitions and training. The "leg lock revolution," driven by innovators like John Danaher and the Danaher Death Squad around 2013–2015, normalized compression holds through systematic instruction, making them integral to modern no-gi curricula amid relaxed rules in events like ADCC and IBJJF no-gi divisions for advanced belts. This acceptance reflected broader grappling trends toward comprehensive limb attacks, reducing earlier stigmas tied to injury potential in traditional Gracie methodologies.[17]

Specific Techniques

Achilles Lock

The Achilles lock, also known as the straight ankle lock, is a compression submission technique that targets the Achilles tendon by pressing it against the ankle bone, utilizing the attacker's forearm or shin as a fulcrum to create intense pressure.[18] This foundational lower-body hold combines elements of tendon compression with potential hyperextension of the foot, distinguishing it as a versatile option in grappling arts.[19] In traditional judo, it is recognized as ashi-hishigi, a kansetsu-waza (joint technique) that has been part of the codified repertoire since the early 20th century. Setup typically begins from dominant positions such as closed guard or single-leg X control, where the attacker isolates the opponent's leg by wrapping their arm around the ankle and pulling the foot toward the body while securing the opponent's thigh or hip for leverage.[20] From closed guard, the bottom player can off-balance the top opponent during a pass attempt, transition to encircle the leg, and apply the hold by tucking the opponent's foot into the armpit for control.[21] In single-leg scenarios, the attacker elevates and rotates the leg to expose the Achilles, using body weight to drive the compression.[22] The primary effects include sharp pain in the Achilles tendon and surrounding calf muscles due to the compressive force, which can lead to rapid submission through discomfort alone; however, excessive application risks ankle strain, ligament damage, or even partial tendon tears if significant torque is added.[23] This technique often integrates with broader ankle lock mechanics, enhancing its efficacy by combining compression with foot flexion to amplify pressure on the tendon.[18] In practice, it serves as a pain-compliance tool rather than a guaranteed structural break unless applied with uncontrolled force.[24]

Biceps Slicer

The biceps slicer is a compression lock that specifically targets the biceps brachii muscle by pressing it against the humerus bone, employing the opponent's forearm or the attacker's shin, knee, or forearm as a fulcrum to isolate and compress the upper arm.[25][26] This mechanism leverages the soft tissue of the biceps against the rigid structure of the humerus, creating localized pressure that exploits the muscle's vulnerability in a flexed position, akin to the fulcrum-based principles in broader compression hold biomechanics.[25] Common setups for the biceps slicer originate from an armbar attempt, where the opponent defends by interlocking their hands to prevent extension, allowing the attacker to transition by trapping the elbow and inserting the shin or forearm into the biceps crook while bridging to increase compression.[25][26] Alternatively, it can be applied from north-south position control, where the attacker pins the opponent's arm, secures the elbow with one hand, and drives the knee or forearm directly into the biceps to fold the arm and apply the hold.[25] In both cases, the technique emphasizes arm isolation to prevent escapes, often using the legs to form a figure-four or triangle configuration around the trapped limb for added leverage.[26] The primary effects of the biceps slicer include intense, sharp pain in the compressed biceps due to the crushing force on the muscle fibers, potentially leading to bruising or temporary impairment if the hold is sustained briefly.[25][26] It is particularly valuable as a seamless transition from a defended armbar, capitalizing on the opponent's defensive posture to shift from joint manipulation to muscular compression without releasing control.[25][26] Regarding usage, the biceps slicer is legal in advanced judo competitions, where it aligns with permitted elbow-targeted techniques, but it remains restricted in amateur Brazilian jiu-jitsu, prohibited for white, blue, and purple belts under IBJJF regulations to mitigate risks for less experienced practitioners.[27][26][28]

Calf Slicer

The calf slicer is a leg compression lock in grappling that targets the bulk of the calf muscle, compressing it against the tibia or fibula bone using the attacker's shin or knee as the primary fulcrum to generate intense pressure.[29] This technique leverages biomechanical principles of leverage and isolation, similar to broader execution methods in compression holds, by isolating the lower leg and forcing the heel toward the glutes to wedge the shin into the calf.[30][29] Common setups originate from leg entanglements, particularly the 50/50 guard, where the attacker secures the opponent's far leg by threading their own leg through for control, then wraps around the targeted leg and squeezes with the attacking leg to compress the calf while pulling the foot downward.[30] Other positional entries include half guard or turtle, where the attacker rolls into a truck position, grabs the ankle, and drives the shin into the calf for the crush.[29] The mechanics emphasize precise shin placement behind the knee to maximize compression without excessive torque on the joint, allowing for quick application in dynamic scrambles.[29] The effects manifest as immediate, sharp pain in the lower leg from the direct compression of muscle tissue against bone, often prompting a rapid tap-out; prolonged application risks calf muscle tears or collateral damage to knee ligaments and tendons.[30][29] In wrestling contexts, it is sometimes referred to as a "leg slicer" due to its broad compressive impact on the lower extremity.[31] Key variations distinguish the straight calf slicer, which relies on linear shin pressure for straightforward compression, from the figure-four variation, where the attacker locks their legs in a figure-four configuration around the opponent's ankle to introduce rotational torque and enhance control.[30] The figure-four setup, often applied from guards like reverse De La Riva, increases leverage by distributing force across the leg wrap, making it suitable for transitions into other leg attacks.[29]

Other Examples

Beyond the primary compression locks, several variations target different muscle groups and are employed in specific grappling contexts. The thigh slicer, also known as a knee compression lock, applies pressure to the opponent's quadriceps muscle against the tibia, typically using the attacker's shin or forearm as a fulcrum while controlling the leg and hip for leverage.[32] This technique often transitions from kneebar positions, where the defender's recovery movements allow isolation of the leg for the compression.[32] Another rare example is the shoulder crusher, which applies compression to the shoulder and upper arm muscles by creating a fulcrum with the legs, arms, or torso to isolate and drive pressure onto the extended or bent arm.[33] It is particularly associated with catch wrestling, where it emerges during armbar transitions, omoplata defenses, or scrambles to trap and submit the opponent.[33] Modern no-gi adaptations in Brazilian jiu-jitsu have popularized emerging variants like the knee slicer, a compression lock that threatens damage to the knee's ligaments and meniscus by pulling the leg across the shin to crush the calf or hamstring muscles.[7] This technique is frequently used in submission grappling to set up further attacks or secure quick taps, reflecting its effectiveness in contemporary rulesets.[7]

Usage in Martial Arts

In Judo and Wrestling

In judo, compression locks form part of the traditional katame-waza (holding and submission techniques), with ashi-hishigi representing a key example of leg-targeted manipulation aimed at compressing the Achilles tendon or ankle joint to induce pain and force compliance.[34] These techniques emphasize control and precision in ne-waza (groundwork), aligning with judo's broader philosophy of efficient immobilization and submission without unnecessary force. However, ashi-hishigi and similar leg compression locks have been prohibited in International Judo Federation (IJF) competitions since the sport's early codification, with rules explicitly limiting kansetsu-waza (joint locks) to the elbow joint only to reduce injury risks.[35] The 2010 IJF rule revisions reinforced this by banning leg grabs from tachi-waza (standing techniques) while maintaining the ne-waza restrictions on leg locks, prioritizing safety in high-level contests.[36] Despite their exclusion from shiai (competition), compression locks like ashi-hishigi hold cultural significance in judo through their preservation in the Kodokan curriculum, where they are studied as historical waza to deepen practitioners' understanding of grappling mechanics and traditional jujutsu roots.[34] This educational role underscores judo's commitment to comprehensive technique development, often explored in kata (forms) or specialized training sessions focused on katame-waza variations.[37] In wrestling, compression locks are integral to catch-as-catch-can styles, where they facilitate pins and submissions by applying targeted pressure to muscles against bones, often transitioning from riding positions to secure victory.[38] For instance, the calf slicer—exemplified by professional wrestler AJ Styles' "Calf Killer" finisher—compresses the calf muscle to immobilize the opponent, drawing from catch wrestling's emphasis on versatile, pain-inducing holds in both amateur and entertainment contexts.[39] In freestyle wrestling, while outright submissions are restricted in ruleset, compression elements appear in advanced leg control for maintaining dominance, such as in the leg ride where the top wrestler hooks and squeezes the bottom wrestler's thigh or calf to prevent escapes and set up turns.[40] Training for these applications in freestyle wrestling incorporates drills centered on leg control, including repetitive riding sequences where practitioners practice hooking the near leg, driving hips forward, and applying pressure to simulate compression without full locks, building endurance and positional awareness essential for competitive pinning.[41] These methods, often starting from neutral positions and progressing to defensive counters, highlight wrestling's focus on dynamic control rather than static submissions.

In Brazilian Jiu-Jitsu and MMA

In Brazilian Jiu-Jitsu (BJJ), compression locks like calf slicers and bicep slicers are subject to strict restrictions at beginner and intermediate levels under International Brazilian Jiu-Jitsu Federation (IBJJF) rules to prioritize safety for less experienced practitioners. For white, blue, and purple belt competitors, these techniques are prohibited in both gi and no-gi divisions, limiting leg submissions to straight ankle locks only.[15][42] At brown and black belt levels, calf slicers and bicep slicers become legal in both gi and no-gi competitions, reflecting the emphasis on advanced technical proficiency.[43] This progression encourages practitioners to master foundational grappling before incorporating high-risk compression techniques, which are often trained extensively in no-gi environments to enhance versatility.[44] In mixed martial arts (MMA), compression locks serve as tactical tools for ground control and finishing opportunities, particularly in promotions like UFC and PRIDE where striking integrates with grappling. Kazushi Sakuraba famously employed leg slicers, including an Achilles lock—a compression submission targeting the calf and Achilles tendon—to secure a quick victory over Shannon Ritch at PRIDE 11 in 2000, showcasing their effectiveness as counters to sprawls during takedown defenses.[45] These locks provide strategic value as secondary submissions during guard passes, allowing fighters to transition from dominant positions like mount or side control to isolate limbs for compression without exposing themselves to strikes.[1] Notable practitioners have elevated compression locks' profile in MMA, often amid controversy. Rousimar Palhares, a BJJ black belt, integrated aggressive leg attacks including compression variants into his UFC bouts, but faced bans and releases due to repeated instances of holding submissions post-tap, such as in his 2013 heel hook win over Mike Pierce—highlighting the fine line between dominance and sportsmanship in hybrid combat.[46] These examples underscore compression locks' role in BJJ-influenced MMA strategies, where they complement chokes and joint locks for comprehensive submission arsenals.

Risks and Regulations

Potential Injuries

Compression locks apply intense pressure to muscles against underlying bones or structures, potentially leading to short-term soft tissue damage and severe pain. These effects typically resolve with rest and conservative management, but failure to release the hold promptly can exacerbate tissue damage. Long-term consequences may arise from repeated exposure to compression, potentially causing chronic pain and reduced mobility. Such outcomes underscore the importance of monitoring for persistent symptoms post-training. The severity of these injuries is influenced by several factors, including higher training volumes and experience levels, which correlate with increased risk due to more frequent exposure.[47] Prevention strategies emphasize prompt recognition of discomfort through established tap-out signals, allowing immediate release to minimize damage, and adhering to controlled training intensity that avoids maximal force during drills.[47] Incorporating protective equipment, such as rash guards or joint supports, and gradual progression in technique practice further reduce incidence rates.[47]

Legality in Competitions

In the International Brazilian Jiu-Jitsu Federation (IBJJF), compression locks such as bicep slicers and calf slicers are prohibited for white, blue, and purple belt competitors in gi competitions due to their potential for injury, but they are permitted for brown and black belt levels where advanced technique is expected.[48][2] Leg compression locks, including calf slicers, are completely banned for athletes under 18 years old across all belt levels to protect developing bodies.[49][50] In International Judo Federation (IJF) competitions, arm-based compression locks like the bicep slicer are legal when applied as a controlled elbow joint manipulation during ne-waza (ground fighting), aligning with permitted kansetsu-waza (joint locks).[27] Leg compression locks, such as calf slicers, remain restricted under broader prohibitions on leg entanglements and non-Kodokan techniques to prevent excessive risk.[51] The Abu Dhabi Combat Club (ADCC) and similar no-gi events like those under the United World Grappling (UAW) framework allow all compression locks without restriction, classifying them under legal leg locks and arm submissions to reward sophisticated grappling skills in professional settings.[52] Variations exist across events: Olympic freestyle wrestling bans compression locks entirely as part of its prohibition on dangerous holds targeting joints or muscles, focusing instead on pins and takedowns.[53] In contrast, professional mixed martial arts (MMA) organizations like the UFC permit compression locks under unified rules, provided they avoid small joint manipulation, enabling their use in ground exchanges.[54][55]

References

  1. Here's Why You Should Learn Compression Locks - Evolve MMA
  2. Top Compression Locks in Brazilian Jiu-Jitsu - Elite Sports
  3. 4 Types of Submissions in Brazilian Jiu-Jitsu (BJJ) - Lifestyle Monks
  4. [PDF] RULE BOOK - Grapplearts
  5. 3 Painful & Unique Compression Locks From Luta Livre (IBJJF Legal)
  6. How To Use The Bicep Slicer Submission In BJJ?
  7. Hidden Leg Attacks, Slicers and Compression
  8. Positions and Other Information - Pride Martial Arts and Fitness
  9. The Science Of BJJ Submissions: Understanding The Mechanics ...
  10. Muscle Pain: Mechanisms and Clinical Significance - PubMed Central
  11. The Anatomy and Physiology of Pain - Pain and Disability - NCBI - NIH
  12. An In-Depth Look Into Judo Leglocks - | Bjj Eastern Europe
  13. Catch Wrestling: A History - LowKick MMA
  14. Shuai Jiao: The Fascinating Martial Art of Chinese Wrestling
  15. British Shuai Jiao Union (BSJU) - Chinese Wrestling - History
  16. The Canon of Judo: Classic Teachings on Principles and Techniques
  17. Where And When Are Leg Locks Allowed In BJJ? - Evolve MMA
  18. All-Time Winners At -99KG At ADCC World Championship
  19. What's The Future of Leg Locks in BJJ and MMA? - Adisa Banjoko
  20. Breaking down the Ankle Lock - Grapplearts
  21. Straight Ankle Lock, Achilles lock or "Botinha" - BJJ Heroes
  22. https://bjjfanatics.com/blogs/news/make-your-achilles-lock-unstoppable
  23. https://www.evolve-mma.com/blog/bjj-101-the-ankle-lock/
  24. Straight Ankle Lock from Single Leg X - YouTube
  25. The Straight Achilles Lock: Just Pain or Serious Risk of Injury?
  26. Achilles Tendon Injuries | Johns Hopkins Medicine
  27. What Is The Bicep Slicer Submission In BJJ? - Evolve MMA
  28. ARE BICEP SLICERS ILLEGAL IN BJJ?
  29. Are Biceps Slicers legal in judo? - Martial Arts Stack Exchange
  30. IBJJF, ADCC, EBI: Confused By BJJ Rulesets? - Evolve MMA
  31. Calf Slicer BJJ
  32. Here's What You Need to Know About The BJJ Calf Slicer
  33. Calf Slicer Submission in BJJ, MMA & UFC - Technique & Applications
  34. Thigh Slicer
  35. Shoulder Crusher
  36. Judo Leglocks - Judo Info
  37. Rules violations and penalties | Judo Channel
  38. [PDF] 2010 Judo Refereeing Rules
  39. Names of Judo Techniques - Kodokan Global
  40. Catch As Catch Can Wrestling - SnakePit Wigan
  41. AJ Styles - Facts @ Wrestlingdata.com
  42. https://fanaticwrestling.com/blogs/news/the-wrestling-leg-ride
  43. Control Your Opponent with These Riding Techniques - YouTube
  44. https://bjjfanatics.com/blogs/news/are-leg-locks-legal-in-bjj
  45. Calf Slicer BJJ Submission: Everything You Need To Know
  46. The best tapouts in UFC history: Part 3: Leglocks - Sportskeeda
  47. Rousimar Palhares released after unsportsmanlike conduct at UFC ...
  48. MMA and BJJ Neck Pain: How to Treat, Prevent, and Recover
  49. Submissions That Cause a Brazilian Jiu Jitsu Neck Injury
  50. https://bjjfanatics.com/blogs/news/how-to-help-combat-soreness-and-bjj-related-pains
  51. Acute Anterior Thigh Compartment Syndrome in a Young Mixed ...
  52. Injuries Common to the Brazilian Jiu-Jitsu Practitioner | Cureus
  53. https://novakikbjj.com/blogs/blog-post/legal-vs-illegal-moves-in-bjj-top-10-banned-ibjjf-techniques
  54. Calf Slicer Breakdown (BJJ) - Digitsu
  55. 17 IBJJF Competition Rules to Remember for All BJJ Athletes
  56. [PDF] Detailed Explanation of the IJF Judo Refereeing Rules
  57. ADCC Rules & Regulations
  58. Wrestling 101: Olympic rules and regulations
  59. Unified Rules of Mixed Martial Arts - UFC.com
  60. [PDF] Unified Rules of Mixed Martial Arts
User Avatar
No comments yet.