Community hub
0 subscribers8 pages, 0 posts
Recent from talks
All channels
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Be the first to start a discussion here.
Contribute something
Welcome to the community hub built to collect knowledge and have discussions related to VT100.
Nothing was collected or created yet.
VT100
View on Wikipediafrom Wikipedia
 | |
| Manufacturer | DEC |
|---|---|
| Type | Computer terminal |
| Release date | 1978 |
| CPU | Intel 8080 |
| Memory | 3 KB RAM 8 KB ROM 175 byte NVRAM |
| Display | 12 in (30 cm) CRT 80×24 or 132×14 characters |
| Sound | Speaker (in keyboard) |
| Input | 83-key detachable keyboard |
| Connectivity | RS-232 serial (optional) 20 mA current loop |
| Weight | Monitor: 30 lb (14 kg) Keyboard: 4.5 lb (2.0 kg) |
| Predecessor | VT50 |
| Successor | VT220 |
The VT100 is a video terminal, introduced in August 1978 by Digital Equipment Corporation (DEC). It was one of the first terminals to support ANSI escape codes for cursor control and other tasks, and added a number of extended codes for special features like controlling the status lights on the keyboard. This led to rapid uptake of the ANSI standard, which became the de facto standard for hardware video terminals and later terminal emulators.
The VT100 series, especially the VT102, was extremely successful in the market, and made DEC the leading terminal vendor at the time. The VT100 series was replaced by the VT200 series starting in 1983, which proved equally successful. Ultimately, over six million terminals in the VT series were sold, based largely on the success of the VT100.[1]
Description
[edit]DEC's first video terminal was the VT05 (1970), succeeded by the VT50 (1974), and soon upgraded to the VT52 (1975). The VT52 featured a text display with 80 columns and 24 rows, bidirectional scrolling, and a custom control protocol that allowed the cursor to be moved about the screen. These "smart terminals" were a hit due both to their capabilities and to their ability to be run over inexpensive serial links, rather than custom proprietary connections as in the case of systems like the IBM 3270, which generally required expensive controllers for distributed applications. In contrast, "dumb terminals" or "glass teletypes" like the ADM-3 (1975) lacked advanced features such as full cursor addressability, and competed mostly on lowest possible hardware cost.
The VT100 was introduced in August 1978, replacing the VT50/VT52 family. Like the earlier models, it communicated with its host system over serial lines at a minimum speed of 50 bit/s, but increased the maximum speed to 19,200 bit/s, double that of the VT52.[2]: 1–3 The terminal provided an option for "smooth scrolling", whereby displayed lines of text were moved gradually up or down the screen to make room for new lines, instead of advancing in sudden "jumps". This made it easier to scan or read the text, although it somewhat slowed down the maximum data rate.[2]: 2–16
The major internal change was the control protocol. Unlike the VT50/52's proprietary cursor control language, the VT100 was based on the newly emerging ANSI X3.64 standard for command codes.[a] At the time, some computer vendors[who?] had suggested that the new standard was beyond the state of the art and could not be implemented at a reasonable price. The introduction of low-cost microprocessors and the ever-falling cost of computer memory offered greatly expanded capabilities, and the VT100 used the new Intel 8080 as its internal processor.[3] In addition, the VT100 provided backwards compatibility for VT52-compatible software, by also supporting the older control sequences.[4] Other improvements beyond the VT52 included a 132-column mode, and a variety of "graphic renditions" including blinking, bolding, reverse video, underlining, and lines of double-sized or double-width characters. The VT100 also introduced an additional box-drawing character set containing various pseudographics that allowed the drawing of on-screen forms.
All configuration setup of the VT100 was accomplished using interactive displays presented on the screen; the setup data was stored in non-volatile memory within the terminal. Maintainability was also significantly improved, since a VT100 could be quickly dismantled into replaceable modules.
The VT100's internal layout can be split into two boards for functionality, not including the VT100's optional boards you can purchase. There is a board called the video monitor board which is used for things like adjusting the CRT on the terminal itself. This board is responsible for adjusting the CRT in the case that the electron beam is offset.[5] The terminal controller board is what handles the terminal logic, and includes a multitude of chips such as DEC's rebranding of the Intel 8080.
In 1983, the VT100 was replaced by the more powerful VT200 series terminals such as the VT220.
Options
[edit]The VT100 has various third party and first party boards designed to enhance the capabilities of the device. Most notable of these from DEC themselves are the VT1XX-AB (Advanced Video Option) and the VT1XX-AA (20 mA Current Loop Option). The cards' capabilities and existence are described in Chapter 4 of the VT100 User Guide.[4]
Variants
[edit]
The VT100 was the first of Digital's terminals to be based on an industry-standard microprocessor, the Intel 8080. Options could be added to the terminal to support an external printer, additional graphic renditions, and more character memory. The last option, known as the "Advanced Video Option" or AVO, allowed the terminal to support a full 24 lines of text in 132-column mode, increasing from the 14 lines of the unexpanded model when used in 132-column mode. The VT100 became a platform on which Digital constructed several related hardware products.
The VT101 and VT102 were cost-reduced, non-expandable follow-on versions. The VT101 was essentially a base-model VT100, while the VT102 came standard with the AVO and serial printer port options pre-installed. The VT105 contained a simple graphics subsystem known as waveform graphics which was mostly compatible with same system in the earlier VT55. This system allowed two mathematical functions to be drawn to the screen superimposed over the normal text display, allowing text and graphics to be mixed to produce charts and similar output.[6] The VT125 added an implementation of the byte-efficient Remote Graphic Instruction Set (ReGIS), which used custom ANSI codes to send graphics commands to the terminal, rather than requiring the terminal to be set to a separate less-efficient graphics mode like the VT105.
The VT131 added block mode support, allowing a form to be sent to the terminal and filled in locally by the user, and then sending the contents of the fields in the form back to the host when the form is filled in.[7]
The VT100 form factor left significant physical space in the case for expansion, and DEC used this to produce several all-in-one stand-alone minicomputer systems. The VT103 included a cardcage and 4×4 (8-slot) Q-Bus backplane, sufficient to configure a small 16-bit LSI-11 microcomputer system within the case,[8]: pp65–72 and supported an optional dual TU58 DECtape II block-addressable cartridge tape drive[8]: pp73–80 which could be used like a very slow disk drive. The VT180 (codenamed "Robin") added a single-board microcomputer using a Zilog Z80 to run the CP/M operating system. The VT278 (DECmate) added a small PDP-8 processor, allowing the terminal to run Digital's WPS-8 word processing software.
See also
[edit]References
[edit]- ^ "VT 510/520 Video Display Terminal" (PDF). Boundless Technologies. Archived (PDF) from the original on 2015-02-05.
- ^ a b VT100 Series Technical Manual (PDF). Digital Equipment Corporation. 1979. Archived (PDF) from the original on 2020-01-01. Retrieved 2022-04-22.
- ^ Shuford, Richard S. (2005), DEC Video Terminals—The VT100 and Its Successors, archived from the original on 2022-04-22, retrieved 2015-08-22
- ^ a b "VT100 User Guide". Digital Equipment Corporation. August 1978. EK-VT100-UG-001.
- ^ VT101 Series Pocket Service Guide (PDF). Digital Equipment Corporation. September 1981. EK-VT101-PS-001.
- ^ VT55 Programmer's Manual (PDF). Digital Equipment Corporation. February 1977. AA-4949A-TC. Archived (PDF) from the original on 2022-03-21. Retrieved 2022-04-21.
- ^ VT131 Video Terminal User Guide (PDF) (2nd ed.). Digital Equipment Corporation. October 1981. EK-VT131-UG-002. Archived (PDF) from the original on 2022-07-11. Retrieved 2022-04-21.
- ^ a b VT103 LSI-11 Video Terminal User's Guide (PDF) (First ed.). Digital Equipment Corporation. September 1979. EK-VT103-UG-001. Archived (PDF) from the original on 2011-08-14. Retrieved 2014-05-03.
- Notes
- ^ A similar standard was being organized as ECMA-48, which was fairly similar to X3.64. The two standards were later merged in ISO 6429.
External links
[edit]- DEC video terminal history Archive
- VT100 user guide
- VT100 Series Technical Manual
- ECMA-48
- The DEC category at the Terminals Wiki
| Key people |
|  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Instruction set architectures, processors |
| ||||||||
| Computer terminals | |||||||||
| Operating systems | |||||||||
| Programming languages | |||||||||
| Character sets |
| ||||||||
| Bus standards | |||||||||
| Other hardware | |||||||||
| Related topics |
| ||||||||
VT100
View on Grokipediafrom Grokipedia
The VT100 is a video display terminal developed and manufactured by Digital Equipment Corporation (DEC), introduced in August 1978 as the company's first terminal to comply with the ANSI X3.64 standard for control sequences.[1] It featured a 14-inch cathode-ray tube (CRT) screen capable of displaying 24 rows of 80 characters in a 7x9 pixel matrix, supporting the full US ASCII character set along with advanced attributes like bold text and smooth scrolling.[2] Powered by an Intel 8080 microprocessor, the VT100 connected via RS-232 serial interface at speeds up to 19,200 baud and included a detachable keyboard with 65 main keys plus an 18-key numeric keypad, weighing approximately 35 pounds in total.[2]
The VT100's design emphasized reliability and user configurability, with on-screen setup menus for adjusting features such as character size, parity, and auto-repeat rates, and it supported optional modes like 132-column display (requiring an advanced video option) and multiple character sets for international use.[2][1] As part of DEC's evolution from earlier models like the VT52, it introduced innovations including host-controllable status LEDs and the ability to handle scrolling regions, making it suitable for mainframe and minicomputer environments.[1] Variants such as the cost-reduced VT101 and graphics-enhanced VT105 followed shortly, expanding its capabilities while maintaining backward compatibility.[1]
The VT100's influence extended far beyond its production run, establishing it as an industry standard that inspired widespread terminal emulation in software like xterm and modern console applications, with its ANSI escape code support becoming a de facto protocol for text-based interfaces in computing.[2] Millions of units were sold by DEC, cementing its role in the history of input-output devices and paving the way for subsequent terminals like the VT100-series successors up to the VT500 line.[3]
History
Development and Release
Digital Equipment Corporation (DEC) began development of the VT100 video terminal in the mid-1970s as a successor to the VT52, which had been introduced in 1975.[1] The project aimed to create a cost-effective display terminal compatible with DEC's PDP-11 minicomputer systems, emphasizing modularity and adherence to emerging industry standards.[2] DEC's engineering team in Maynard, Massachusetts, focused on designing an architecture that supported expandable options while keeping production costs low for widespread use in computing environments.[4] The VT100 was the first terminal to implement the ANSI X3.64 standard for control sequences, marking a shift toward standardized terminal communications.[2] Initial manufacturing took place at DEC's facilities in Maynard, Massachusetts, where the company had established its primary production operations since the 1950s.[4] Released in August 1978, the base VT100 model was priced at approximately $1,195, making it accessible for institutional and commercial buyers.[5] Early adoption was strong among universities and businesses, particularly those relying on PDP-11 systems for data processing and time-sharing applications, contributing to its rapid integration into academic and corporate computing infrastructures.[1]Market Impact
The VT100 played a pivotal role in establishing Digital Equipment Corporation (DEC) as a dominant force in the video terminal market during the late 1970s and 1980s. Introduced in 1978, it quickly became a bestseller, with sales reaching one million units by 1985, contributing substantially to DEC's revenue growth in that decade. By the 1990s, the broader VT series, building on the VT100's foundation, had sold over six million units worldwide, underscoring the model's enduring commercial success and its influence on DEC's position as a leading vendor of peripherals for minicomputer systems.[6][7] The VT100 significantly boosted DEC's market share in asynchronous display terminals, with estimates placing DEC's portion at up to 43% of the market by 1980, based on vendor surveys of shipments totaling around 380,000 units that year. This growth outpaced earlier competitors like the Lear Siegler ADM-3A, a popular 1976 model that held shares of 9-25% but was surpassed by the VT100's advanced features and compatibility, helping DEC capture a larger segment of the expanding terminal ecosystem for data processing and time-sharing applications.[8] Key to its adoption was the VT100's integration into pioneering networks and operating environments, including widespread use in ARPANET sites where users accessed shared resources via DEC VT-100 terminals connected to host systems. It also became a standard peripheral in early Unix environments, supporting time-sharing on systems like PDP-11 and VAX minicomputers, thereby influencing the development of minicomputer-based workflows in academia and research. Economically, the VT100's pricing—typically around $1,500 to $3,000 per unit—made it more accessible than IBM's 3270 terminals, which cost approximately $4,500 for the display alone in the late 1970s, enabling broader deployment in cost-sensitive data processing setups beyond mainframe-centric operations.[9][10][11]Technical Specifications
Hardware Components
The VT100 video terminal's core hardware revolves around an Intel 8080 microprocessor operating at a clock frequency of approximately 2.76 MHz, derived from a 24.8832 MHz crystal divided by 9, which handles all processing tasks including display control, keyboard input, and communication protocols.[12] This 8-bit CPU executes firmware stored in 8 KB of ROM, implemented using four 2K × 8 or a single 8K × 8 integrated circuit package, enabling efficient operation within the terminal's constrained environment.[12] Memory components include 3 KB of RAM primarily dedicated to the screen buffer, utilizing six 1K × 4 dynamic RAM chips to store up to 24 lines of 80 characters (or 14 lines of 132 characters in wide mode), with the remainder allocated for stack, buffers, and temporary data.[12] Additionally, 175 bytes of nonvolatile RAM (NVRAM), based on the ER1400 EAROM device providing 1400 bits organized as 100 × 14-bit words, store user setup configurations such as tab stops and answerback messages, retaining data for up to 10 years without power.[12] The display subsystem features a 12-inch (30 cm) diagonal monochrome cathode-ray tube (CRT) with P4 phosphor, offering resolutions of 80 columns by 24 rows or 132 columns by 14 rows, where characters are rendered in a 7 × 9 dot matrix with descenders for improved readability.[13] The active display area measures 203 mm × 127 mm (8 inches × 5 inches), and the phosphor's persistence, combined with microprocessor-managed vertical retrace timing, supports smooth scrolling at rates up to 6 lines per second in 60 Hz mode by shifting screen data without full redraws.[13][12] Input is provided via a detachable 83-key keyboard, comprising a 65-key typewriter section in ANSI X4.14-1971 layout plus an 18-key numeric keypad, connected by a 1.9 m (6 ft) coiled cord and weighing 2.0 kg (4.5 lb).[13] The main monitor unit, housing the CRT, electronics, and power supply, weighs 13.6 kg (30 lb) total and measures 36.83 cm high × 45.72 cm wide × 36.20 cm deep (approximately 14.5 × 18 × 14.25 inches).[13] Power requirements support switch-selectable inputs of 90-128 V rms or 180-256 V rms at 47-63 Hz, drawing a maximum of 3.0 A at 115 V (or 1.5 A at 230 V) with 250 VA apparent power and 150 W maximum consumption, protected by a 3 A normal-blow fuse.[13] A detachable 3-prong power cord, 1.9 m (6 ft) long, facilitates connection to standard AC outlets.[13]Connectivity and Interfaces
The VT100 primarily utilized an RS-232 serial port as its main communication interface, enabling asynchronous transmission of data between the terminal and a host computer or modem. This interface conformed to the EIA RS-232-C standard, employing a 25-pin DB-25 connector for connections. It supported full-duplex operation, allowing simultaneous transmission and reception of data, with configurable baud rates ranging from 50 to 19,200 bit/s to accommodate various system requirements.[14][15] For signal management, the RS-232 interface included provisions for hardware flow control using Request to Send (RTS) and Clear to Send (CTS) signals, where RTS was asserted continuously during operation to indicate readiness, while CTS is ignored by the VT100. Additionally, software flow control via XON/XOFF characters was supported to prevent buffer overflow, with the terminal's 64-character input buffer triggering these controls as needed. The interface voltages adhered to RS-232 specifications, with output marks at -6.0 to -12.0 V and spaces at +6.0 to +12.0 V, ensuring compatibility with contemporary modems and direct host connections.[14][16] An optional 20 mA current loop interface was available through the VT1XX-AA adapter board, providing compatibility with legacy teletype systems and offering improved noise immunity for short-distance connections without a modem. This option converted the standard RS-232 signals to a current loop format, supporting both active and passive modes selectable via a slide switch, with specific pin assignments for transmit and receive circuits on an 8-pin connector. It was particularly useful in industrial environments where electrical interference could degrade voltage-based signaling.[14][17][15]Features and Capabilities
Display and Character Handling
The VT100 utilizes a 7-bit character encoding based on the DEC National Replacement Character Set (NRCS), which encompasses the standard 96 printable ASCII characters (codes 33 to 126 decimal) while allowing substitution of specific glyphs for national or special purposes.[18] The DEC Special Graphics subset of NRCS replaces certain ASCII positions (octal 137 through 176) with line-drawing and box-drawing symbols, such as horizontal and vertical lines, corners, and geometric shapes like diamonds and arrows, facilitating the creation of simple graphical interfaces like menus or borders on the monochrome display.[18] International variants of NRCS, such as the United Kingdom set invoked via the SCS sequence ESC (A, substitute the ASCII backslash (5C hex) with the pound sign (£) and adjust other symbols for British usage, ensuring compatibility with localized applications without altering the core ASCII structure.[18] The VT100's rendering capabilities emphasize reliable text presentation on its 14-inch CRT with a green phosphor screen, featuring a character resolution of 10x10 dots per cell in 80-column mode (or 9x10 in 132-column mode with AVO).[16] Smooth scrolling operates at a rate of 6 lines per second, synchronized to the display's 60 Hz frame refresh rate (or 50 Hz in some configurations), where the video processor shifts screen content one scan line at a time over 10 frames to simulate fluid upward movement and minimize visual flicker during line feeds.[16] Split-screen functionality is enabled through scrolling region definitions, allowing the host to specify top and bottom margins (e.g., via DECSTBM sequence) for independent vertical scrolling in a subset of the 24-line display area, useful for dividing the screen into status and content zones while maintaining full-screen resolution.[16] Cursor control supports both absolute addressing, positioning the cursor to any row and column (1-based indexing from 1,1 at top-left) using the ANSI-standard CUP escape sequence, and relative movements such as up (CUU), down (CUD), forward (CUF), or backward (CUB) by a specified number of units, enabling precise navigation without redrawing the entire screen.[18] For input processing, the VT100 operates in local mode by default, where keystrokes are buffered and echoed to the screen for immediate visual feedback, supporting interactive editing without constant host polling.[18] Local editing modes permit operations like character insertion (ICH), deletion (DCH), line insertion (IL), and line deletion (DL), applied within defined margins to modify text blocks autonomously before transmission to the host.[18] The audible bell, integrated into the keyboard assembly as a small piezoelectric loudspeaker, emits a 800 Hz tone lasting 0.25 seconds in response to the BEL control character (07 hex), serving as an aural cue for alerts, errors, or line-end notifications.[16] Keyboard input relies on a matrix of mechanical switches scanned by the microprocessor, which maps detected scan codes to corresponding 7-bit ASCII values (or NRCS equivalents), with support for 3-key rollover to handle simultaneous presses reliably and auto-repeat for held keys at approximately 30 characters per second.[15] Visual attributes enhance character rendering for emphasis, with the base configuration limited to reverse video, where selected text inverts polarity to appear as dark characters on a light background (or vice versa, depending on setup).[16] The Advanced Video Option (AVO) expands this by adding dedicated attribute memory, enabling underline (a horizontal line beneath characters), blink (flashing at 1-2 Hz), and bold (increased intensity via dot duplication), applied selectively via the SGR ANSI escape sequence without affecting adjacent text.[17] These attributes are stored per character cell in the 2K-byte screen RAM (expanded to 3K with AVO), ensuring persistent display until reset, and the VT100 supports ANSI escape codes for their invocation and selective erasure.[18]Control Sequences and Protocols
The VT100 terminal primarily implemented the ANSI X3.64-1977 standard for control functions, which served as a precursor to the later ISO 6429 and ECMA-48 standards, enabling a structured command language for terminal operations such as cursor movement and screen formatting.[18] This protocol used escape sequences beginning with the Escape character (ESC, ASCII 27) followed by parameters and terminators, allowing host systems to issue precise instructions to the terminal's firmware. In ANSI mode, the VT100 processed these sequences to manage display attributes, editing functions, and input transmission, ensuring compatibility with emerging industry standards for video terminals.[18] A key element of the protocol was the Control Sequence Introducer (CSI), denoted as ESC [, which introduced parameterized commands for advanced features unavailable in earlier terminals. For instance, cursor positioning employed the CUP (Cursor Position) sequence ESC [ Pn ; Pm H, where Pn specified the row and Pm the column (both defaulting to 1 if omitted), enabling direct addressing within the 24x80 or 24x132 display grid.[18] Screen clearing used the ED (Erase in Display) sequence, such as ESC [ 2 J to erase the entire screen from the cursor position onward, while attribute settings via the SGR (Select Graphic Rendition) sequence like ESC [ 1 m activated bold text (with 0 resetting attributes).[18] These CSI-based sequences provided a flexible, extensible framework that influenced subsequent terminal emulators and protocols. For backward compatibility, the VT100 included a full VT52 emulation mode, activated by the host sending ESC [ ? 2 l (resetting DEC ANSI Mode), which limited the terminal to interpreting only VT52-style escape sequences and restricted the display to 24 rows by 80 columns.[18] In this mode, simpler non-parameterized sequences handled basic operations, such as ESC A for cursor up, ESC B for cursor down, and ESC Y Pl Pc for direct cursor addressing (where Pl and Pc were line and column values offset by 32).[19] To exit VT52 mode and return to ANSI operation, the host issued ESC <, restoring access to the full feature set.[18] This dual-mode support allowed legacy software designed for the earlier VT52 to function without modification, though advanced VT100 capabilities like extended attributes were unavailable during emulation.[18] Error handling in the VT100 firmware emphasized robustness, ignoring invalid control sequences by displaying a checkerboard error character and terminating the parse with control characters like CAN (ASCII 24) or SUB (ASCII 26).[18] Embedded invalid characters within a sequence triggered immediate execution of prior valid portions, preventing total failure. Additionally, users could select the default protocol (ANSI or VT52) through the terminal's setup menu in local mode, accessed by pressing the SET-UP key, where SET-UP feature group B, switch 3 toggled between modes (0 for VT52, 1 for ANSI), with the choice saved in non-volatile RAM for persistence across power cycles.[15] This combination of standards-compliant sequences and forgiving error recovery contributed to the VT100's reliability in diverse host environments.[18]Options and Variants
Optional Enhancements
The VT100 could be enhanced through modular add-on options, primarily in the form of plug-in circuit boards installed via the rear panel access cover, allowing users to customize the terminal for specific needs without requiring a full model upgrade.[17][20] The VT1XX-AB Advanced Video Option (AVO) was a key enhancement that expanded display capabilities beyond the base model's 24 lines by 80 columns, adding support for a 132-column mode (24 lines by 132 columns) through additional display memory and a second character generator ROM.[17][20] This option also introduced advanced character attributes, including reverse video (dark characters on a light background), bold, blink, and underline, selectable via Select Graphic Rendition (SGR) escape sequences such as parameter 7 for reverse video.[17][20] Installation involved mounting the board onto the terminal controller in the leftmost slot using standoffs, with power disconnected, followed by a self-test checkout using the SET-UP key or escape sequence ESC # 8 to verify the expanded display.[17] The VT1XX-AA 20 mA Current Loop Option provided compatibility with legacy teletype systems by enabling a current loop interface as an alternative to the base RS-232 serial port, supporting direct host connections over longer distances without a modem.[17][20][21] It operated in passive (20 mA current, minimum 5.0 V open circuit) or active (17 V ±5% with 660 ohms) modes, configurable via switches on the board for transmit and receive functions, and was installed by connecting the P5 connector to J5 on the terminal controller, accessible through the rear panel.[20] Checkout used a data loopback test with escape sequence ESC [ 2 ; 2 y, displaying "WAIT" during the approximately six-second process, with errors indicated numerically.[17] Additional options included the VT1XX-AC Serial Printer Interface, which added a dedicated port for connecting serial printers to capture screen output for hardcopy.[21] Setup customization was facilitated by nonvolatile random-access memory (NVRAM), allowing users to save and recall configurations—such as answerback messages up to 20 characters—via SHIFT+S for save and SHIFT+R for recall in SET-UP mode, ensuring persistent settings across power cycles.[20] Firmware updates for these enhancements were handled through DEC service procedures, though the options themselves relied on the terminal's existing ROM-based control sequences.[17]Model Variants
The VT100 series encompassed several official variants developed by Digital Equipment Corporation (DEC), each integrating distinct hardware modifications to address specialized user needs while preserving core compatibility with ANSI X3.64 escape sequences and VT52 protocols. These models expanded the base VT100's 14-inch monochrome CRT display, 8080 microprocessor, and RS-232 interface by adding features like graphics processing, printing support, or embedded computing, with releases spanning from 1979 to 1982.[1] The VT101 functioned as the entry-level monochrome variant, omitting the optional printer port of higher models to reduce costs while retaining essential VT100 attributes such as an 80-column by 24-line display, 7x9 dot-matrix characters, and non-volatile setup memory for baud rates up to 19,200. Introduced around 1981, it targeted budget-conscious deployments in commercial and educational settings, with a detachable keyboard and no expansion slot for add-ons.[22] Building on the VT101, the VT102 incorporated the Advanced Video Option (AVO) board and a serial printer port as standard features, enabling local print screen functionality to capture and output screen content directly to an attached printer. Released in 1981, this variant also supported insert/delete line operations and half-duplex modem protocols, making it ideal for enhanced data processing and office environments without requiring post-purchase upgrades.[22][23] The VT105 augmented the VT100 with dedicated waveform graphics hardware compliant with the IEEE-502 standard, facilitating simple plotting and oscilloscope-style visualizations on its 80x24 alphanumeric grid overlaid with a 230x512 dot resolution graphics plane. Announced in late 1979, it included a specialized M7071 graphics module for generating basic waveforms and curves, primarily serving scientific and engineering applications like laboratory instrumentation interfaces.[24] DEC's VT125, launched in 1981, introduced ReGIS vector graphics support tailored for the Professional 300 series workstations, featuring a bitmap architecture with 768x240 pixel resolution, four selectable colors from a palette of 64, and four video attributes (bold, blink, reverse video, and underline). This model retained VT100 text handling but added a graphics processor for drawing lines, arcs, and text in vector format, enabling interactive technical illustrations and CAD-like operations.[25][26] Additional variants addressed niche requirements: the VT131, released in 1981, optimized for data entry with block mode transmission, protected fields, and local editing buffers to streamline form-based interactions under VMS environments. The VT103 integrated an LSI-11/23 minicomputer backplane into the VT100 chassis for embedded PDP-11 processing, while the VT180 added a 2 MHz Z80 CPU and 64 KB RAM for standalone CP/M execution with floppy disk support. The VT278, introduced in 1981 as DECmate-compatible, merged a PDP-8/E-equivalent using a Harris HD6120 CMOS processor with VT100 I/O, supporting word processing and basic computing via integrated RX02 floppy drives.[22][27][28][29]Legacy and Emulation
Influence on Computing Standards
The VT100, introduced by Digital Equipment Corporation in 1978, played a pivotal role in establishing ANSI X3.64 as the de facto standard for terminal control sequences by being the first widely adopted terminal to implement it comprehensively.[2] Its popularity contributed to over six million terminals sold in the VT series overall, with the VT100 reaching one million units by 1985, demonstrated the practicality of these sequences for cursor control, editing, and display management, encouraging software developers and hardware manufacturers to align with the standard.[1] This widespread implementation helped ANSI X3.64 gain traction beyond its initial 1977 publication, influencing international harmonization efforts. The VT100's adherence to ANSI X3.64 directly contributed to the evolution of related global standards, including ECMA-48 (second edition, August 1979) and ISO/IEC 6429 (1983), which adopted and refined the same set of escape sequences for coded character sets and control functions.[30] These standards, essentially equivalents in their core provisions for terminal behavior, built on the ANSI framework to ensure interoperability across diverse computing environments, with the VT100 serving as a practical reference for compliance testing and implementation. By providing an affordable, microprocessor-controlled serial video terminal, the VT100 accelerated the industry's transition from impact printers and block-mode systems like IBM's 3270 to character-oriented, ASCII-based video displays, enabling more interactive and efficient user interfaces in multi-user systems.[2] This shift reduced reliance on print-centric workflows and promoted real-time screen updates, fundamentally altering how data was visualized and manipulated in enterprise computing during the late 1970s and 1980s. In the Unix and TCP/IP ecosystems, the VT100 became the foundational model for terminal emulation, directly inspiring the xterm emulator developed for the X Window System in the early 1980s to support remote sessions over networks.[2] Its control sequences were integral to telnet protocol implementations, allowing standardized character-stream communication across ARPANET and early Internet hosts, which facilitated the growth of distributed computing in academic and research settings. The enduring legacy of the VT100 lies in its establishment of conventions for text-based interfaces that persist in modern console applications and operating system shells, where ANSI-derived escape sequences remain the norm for formatting and navigation.[21] Later enhancements in the VT200 series extended these capabilities, further solidifying the lineage of standards-compliant terminals.Modern Emulation and Usage
In contemporary computing, the VT100 remains emulated in popular terminal software to ensure compatibility with legacy protocols and modern workflows. The xterm emulator, part of the X Window System, provides comprehensive support for VT100 escape sequences, including those from the Advanced Video Option (AVO) such as underline, bold, and 132-column modes, making it a standard choice for Unix-like environments.[31] PuTTY, a widely used SSH and Telnet client, fully emulates VT100 functionality, including cursor controls and character attributes, and is particularly valued for its lightweight design in cross-platform scenarios.[32] Similarly, iTerm2 on macOS supports VT100 sequences alongside extensions from VT220 and ECMA-48 standards, enabling AVO features like enhanced scrolling and display attributes for seamless integration with development tools.[33] VT100 emulation plays a critical role in software development, particularly for testing and debugging legacy systems. Developers rely on these emulators to verify compatibility with older Unix tools that expect VT100 control sequences, such as those in Bourne shell scripts or early curses-based applications.[34] In SSH client configurations, VT100 mode ensures accurate rendering of remote sessions on Unix servers, preventing issues like garbled output from escape code mismatches.[35] For embedded systems, emulators facilitate serial port debugging of microcontrollers and RTOS environments, where VT100 protocols simulate hardware terminals for firmware validation without physical devices.[36] Hardware recreations of the VT100 persist through open-source projects and enthusiast communities, preserving its functionality in modern contexts. FPGA-based implementations, such as the fpga-vt project, replicate the VT100's serial terminal behavior using programmable logic devices, supporting core features like ASCII rendering and basic controls for educational and retro-computing applications.[37] Vintage restoration efforts, often coordinated in forums like the Vintage Computer Federation, involve repairing original VT100 units or building clones to maintain operational hardware for historical simulations and compatibility testing.[38] As of 2025, the VT100's influence endures in terminal multiplexers and cloud-based interfaces, underpinning tools that extend its legacy into distributed environments. Tmux, a session manager for Unix shells, maintains VT100 compatibility through terminfo definitions, allowing users to multiplex sessions while preserving escape sequence handling for tools like vim and top.[39] Web-based consoles in cloud platforms, such as those using Flynet Viewer, emulate VT100 for browser-accessible connections to Unix and VMS systems, supporting AVO-enhanced displays in remote administration and DevOps pipelines.[40] This ongoing adoption highlights the VT100's foundational role in the ANSI escape code standard, ensuring interoperability across virtualized infrastructures.[17]References
- https://terminals-wiki.org/wiki/index.php/DEC_VT102
- https://terminals-wiki.org/wiki/index.php/DEC_VT103
- https://terminals-wiki.org/wiki/index.php/DEC_VT180
- https://terminals-wiki.org/wiki/index.php/DEC_VT278