Hubbry Logo
Glossary of balletGlossary of balletMain
Open search
Glossary of ballet
Community hub
Glossary of ballet
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Glossary of ballet
Glossary of ballet
from Wikipedia

Because ballet became formalized in France, a significant part of ballet terminology is in the French language.

A

[edit]

À la seconde

[edit]

(French pronunciation: [a la səɡɔ̃d]) (Literally "to second") If a step is done "à la seconde", it is done to the side. 'Second position'. It can also be a balance extending one foot off the ground in ‘Second Position’.

À la quatrième

[edit]

(French pronunciation: [a la katʁijɛm]) One of the directions of body, facing the audience (en face), arms in second position, with one leg extended either to fourth position in front (quatrième devant) or fourth position behind (quatrième derrière).

À terre

[edit]

(French pronunciation: [a tɛʁ]) Touching the floor; on the floor.

Adagio

[edit]

Italian, or French adage, meaning 'slowly, at ease.'

  1. Slow movements performed with fluidity and grace.
  2. One of the typical exercises of a traditional ballet class, done both at barre and in center, featuring slow, controlled movements.
  3. The section of a grand pas (e.g., grand pas de deux), often referred to as grand adage, that features dance partnering.

Allegro

[edit]

(Italian pronunciation: [alˈleːɡro]; meaning 'happy')

  1. Brisk, lively motion. An attribute of many movements, including those in which a dancer is airborne (e.g., assemblé, changement, entrechat, sauté, sissonne, soubresaut).
  2. Used in ballet to refer to all jumps, regardless of tempo.
  3. A category of exercises found in a traditional ballet class, e.g. petit allegro (small, generally fast jumps) and grand allegro (large, generally slower jumps).

Allongé

[edit]

(French pronunciation: [alɔ̃ʒe]; meaning 'elongated.') Refers to a foot and leg position when the toes and knees are extended and elongated, rather than forming the usual soft curve. Can also refer to a similar arm position.

The apparent elegance and precision exhibited by a confident, accomplished dancer.

In dance (particularly ballet), arabesque (French: [aʁabɛsk]; literally, "in Arabic fashion") is a body position in which a dancer stands on one leg (the supporting leg) with the other leg (the working leg) extended, straight, behind the body. The arm positions can vary and are generally allongé. The foot of the supporting leg may be flat on the floor, on the ball of the foot (demi-pointe/relevé), or on the tips of the toes (en pointe).

Arrondi

[edit]

(French pronunciation: [aʁɔ̃di]; meaning 'rounded') A position of the hand. Rounded, in contrast with allongé ('stretched out', as in arabesque).

Assemblé

[edit]
Assemblé

(French pronunciation: [asɑ̃ble]; literally 'assembled') Sometimes also pas assemblé. A jump that takes off from one foot and lands on two feet. When initiated with two feet on the ground (e.g. from fifth position) the working leg performs a battement glissé/dégagé, brushing out. The dancer launches into a jump, with the second foot then meeting the first foot before landing. A petit assemblé is when a dancer is standing on one foot with the other extended. The dancer then does a small jump to meet the first foot.

Attitude

[edit]
Attitude derrière

(French pronunciation: [atityd]) A position in which a dancer stands on one leg (the supporting leg) while the other leg (working leg) is raised and turned out with knee bent to form an angle of approximately 90° between the thigh and the lower leg. The height of the knee versus the foot and the angle of the knee flexion will vary depending on the techniques. The working leg can be held behind (derrière), in front (devant), or to the side (à la seconde) of the body. The alignment of the thigh compared to the midline in Attitude derrière will vary depending on the techniques. The foot of the supporting leg may be flat on the floor, en demi-pointe (ball of the foot), or en pointe (tips of the toes). The standing leg can be straight or bent ("fondu").

Avant, en

[edit]

(French pronunciation: [ɑ̃n avɑ̃]; meaning 'forwards') A movement towards the front, as opposed to en arrière, which is conversely a movement towards the back. For example, a step travelling en avant moves forwards towards the audience, as in sissonne en avant.

Arrière, en

[edit]

(French pronunciation: [ɑ̃n aʁjɛːʁ]; meaning 'backwards') A movement towards the back, as opposed to en avant.

B

[edit]

Balancé

[edit]
Balancé

(French pronunciation: [balɑ̃se]; "balanced") A rocking sequence of three steps—fondu, relevé, fondu (down, up, down)—executed in three counts. Before the first count, one foot extends in a dégagé to second position (balancé de côté) or to the front (balancé en avant) or rear (balancé en arrière). The second foot in the sequence (in any direction) assembles behind the first to relevé in fifth or fourth position.

Balançoire

[edit]

(French pronunciation: [balɑ̃swaʁ]; "swing [children's toy]") Swinging the working leg between front (devant) and back (derrière) through first position, usually in conjunction with grands battements or attitudes and involving seesaw like shifting of the upper body in opposition to the legs. Similar to en cloche.

Ballerina

[edit]

(Italian) A principal female ballet dancer in a ballet company. Ballerinas get more lead roles, which are referred to as principal roles as they are generally danced by principal dancers. Soloists also often dance in principal roles, but most of the time not in the first cast of the show (i.e. the cast that performs the most shows)

Ballerino

[edit]

An informal term for male dancers in a ballet company in Italy.

French word meaning a ballet performance, a ballet work, a ballet company and possibly the ballet dance genre, although the expression danse classique also exists for the latter meaning, is less equivocal and is more commonly used when referring to the learning of this dance.

The foundational principles of body movement and form used in ballet.

Balletomane

[edit]

A ballet fan or enthusiast. The word is of Russian origin c. 1930, with the suffix -mane coming from maniya (mania).[1]

Showing lightness of movement in leaps and jumps. A dancer exhibiting ballon will appear to spring effortlessly, float in mid-air, and land softly like a balloon.

Ballonné

[edit]

In classical ballet, the term ballonné is a step where the leg is extended (can be front, side, or back) at 45 degrees. The knee is then bent and the foot brought to a sur le cou-de-pied position. This can also be done as a relevé or jump.

Ballotté

[edit]

A ballotté is a jumping step in classical ballet that consists of coupé dessous and small developpés performed with a rocking and swinging movement. The step can be performed with the leg extensions at 45 or 90 degrees.

Exercising at a portable barre. A fixed barre can be seen in the background.

A sturdy horizontal bar, approximately waist height, used during ballet warm-up exercises and training. Fixed barres are typically mounted on -covered walls; portable barres can be relocated as needed. Used for balance, not support. A barre is a tool, not a necessary item to dance.

An alternating side-to-side movement of the working (non-supporting) leg. Typically performed in multiples, quickly and in rapid succession so that the working foot appears to be fluttering or vibrating.

Batterie

[edit]

(French pronunciation: [batʁi]) A general term for jumps in which the legs open slightly sideways and close (crossed in fifth position) multiple times, alternating feet. (See "Battu.)

Battu

[edit]

(French pronunciation: [baty]; meaning 'beaten') A movement with an extra beating of the feet included, as in jeté battu.

Brisé

[edit]

(French pronunciation: [bʁize]; literally 'broken') A jump consisting of an assemblé traveling either forward (en avant) or backward (en arrière), with an extra beat that "breaks" the jump in its travel. To execute a brisé en avant, the dancer demi-pliés in fifth position and brushes the back leg (through first position) to the front, then springs into the air and brings the second foot to meet it in the back before switching to the front to land, creating a beating action with the legs. In a brisé en arrière, the process is reversed, with the front leg brushing to the back and beating to land in front.

Bras croisé

[edit]

(French pronunciation: [bʁa kʁwaze]; literally 'crossed arms') Arm placement in which one arm is extended in second position away from the audience while the other is curved in first position (Cecchetti fourth position en avant or RAD/French third position).

Bravura

[edit]

(Italian pronunciation: [braˈvuːra]) A flashy, showy and elaborate style of dance that involves a lot of elaborate steps and style to similar music. Usually during a key solo.

Bourrée

[edit]

Quick movement of the feet, can be performed on pointe or on demi-pointe. The dancer straightens one leg (the leg in back) and bends a leg and picks it up(the leg in front). Then the bent leg is straighted on the floor and the straight leg is picked off the floor and bent. These steps are repeated over and over again. The dancer looks as if he or she is flying across the floor.

C

[edit]

Cabriole

[edit]
Double cabriole derrière.

(French pronunciation: [kabʁijɔl]; meaning 'caper.') An allegro step in which the extended legs are beaten in the air. Cabrioles are divided into two categories: petite, which are executed at 45 degrees, and grande, which are executed at 90 degrees. The working leg is thrust into the air, the underneath leg follows and beats against the first leg, sending it higher. The landing is then made on the underneath leg. Cabriole may be done devant, derrière and à la seconde in any given position of the body such as croisé, effacé, écarté, and so on.

Cambré

[edit]

(French pronunciation: [kɑ̃bʁe]; literally 'arched.') A bending at the waist in any direction, forward, backward, or to the side.

Group of ballet students performing Cambre

(French pronunciation: [ʃɛne]; 'chained', plural.) Also known as "chaînés turns", a common abbreviation for tours chaînés déboulés, a series of quick, 360 degree turns that alternate the feet while traveling along a straight line or in a circular path. Each foot performs a half turn, with feet held in a tight first position en pointe or demi-pointe.

Changement de pied

[edit]

(French pronunciation: [ʃɑ̃ʒmɑ̃]; literally 'change, changing.') A jump in which the feet change positions in the air. For example, beginning in fifth position with the right foot front, plié, jump switching the right leg to the back, and land in fifth position with the left foot front. In the Vaganova vocabulary, petit changement de pieds indicates a changement where the feet barely leave the floor.

Chassé

(Literally 'chased.')

  1. A sliding movement forward, backward, or sideways with both legs bent, then springing into the air with legs straight and together. It can be done either in a gallop or by pushing the leading foot along the floor in a plié to cause an upward spring. It is typically performed in a series or as part of a combination of other movements.
  2. A sliding movement as described above, but without the jump aspect. Instead, the leading foot is pushed along the floor in plié as described above, as a transition into another movement or position.

Cloche, en

[edit]

(French pronunciation: [ɑ̃ klɔʃ]; meaning 'like a bell.') Refers to brushing through first position from fourth devant or fourth derrière to the opposite fourth with the upper body held upright. Can be done continuously, as is often done with grands battements and attitudes. Similar to Balançoire, which additionally allows seesaw like upper-body shifting in counterpoint to the legs.

The Vaganova system may refer to en cloche as "passé la jambe" or "battement passé la jambe".[2]

Coda

[edit]

(Italian pronunciation: [ˈkoːda]); literally 'tail'). The concluding segment of a performance or suite of dances comprising a grand pas (e.g., grand pas de deux). A particularly large or complex coda may be called a grand coda. If a large group of dancers participate, the terms coda générale or grand coda générale may be used.

The ensemble of a ballet company, especially the ensemble apart from the featured dancers. Being a part of the corps means one is neither a soloist nor a principal dancer.

Coryphée

[edit]

(French pronunciation: [kɔʁife]) In some systems, a dancer of higher rank than a member of the corps de ballet, performing in small ensembles and small solo roles but not ranked as a soloist.

Côté, de

[edit]

(French pronunciation: [də kote]; 'sideways.') A movement traveling to the side.

Cou-de-pied

[edit]

(French pronunciation: [ku pje]; 'neck of the foot.') Position of the arched working foot raised to, and resting on, the ankle. This could be in front (["conditional"] devant), behind (derrière), or wrapped (sur le cou-de-pied: arch of the foot wrapped around the ankle with the heel in front of the ankle and the toes behind, often interchangeable with the devant/conditional position), depending on the activity and the school/method of ballet.

Coupé

[edit]

(French pronunciation: [kupe]; meaning 'cut.') Coupé is both a step and action. It is commonly executed from cou-de-pied front to cou-de-pied back or vice versa. It may also be done from an extended leg position into fondu or directly through fifth position (as in concluding a jeté). Coupé can only be performed through a closed leg position.

The Vaganova School rarely uses the term coupé except as the preparation for specific allegros. Rather, "tombé through fifth position" is more commonly used.[3]

In the United States, "coupé" may be used to denote the position cou-de-pied, not unlike "passé" is used to denote the position retiré in addition to the action of passing through retiré.

Couru

[edit]

(French pronunciation: [kuʁy]; 'run,' past participle, as in 'making small quick steps.') In most cases, this holds the calves together and the feet in a tight fifth position en pointe or demi-pointe and travels forward, backward, or to either side. E.g. pas de bourrée couru (also called bourrée for short).

Croisé, croisée

[edit]

(French pronunciation: [kʁwɑze]; meaning 'crossed.') One of the positions of the body or épaulement. Facing one of the corners of the stage, the body presents at an oblique angle to the audience, such that the audience can see still both shoulders and hips. The working leg may be crossed to the front (devant) or to the back (derrière).

Croisé is used in the third, fourth, and fifth positions of the legs. A dancer is in croisé devant if at a 45 angle to the audience, the downstage leg (closest to the audience) is working to the front and the arms are open in third or fourth with the downstage arm being the one in second. A dancer is in croisé derrière if at a 45 degree angle to the audience, the upstage leg (farthest from the audience) is working to the back and the arms are open in third, fourth, or allongé in arabesque with the upstage arm being the one out towards second, e.g. arabesque croisée or Russian fourth arabesque. Croisé derrière in the Russian school alternatively has the upstage leg working to the back, but the downstage arm out to second.

Examples of croisé: the front leg is the right leg and the dancer is facing the front-left corner of the stage; or the front leg is the left, and the dancer is facing his/her front-right corner.

Croix, en

[edit]

(French pronunciation: [ɑ̃ kʁwɑ]; meaning 'in the shape of a cross.') Term often used during barre exercises to indicate that a step is done to the front, to the side, to the back, and then again to the side (as in the shape of a cross), finishing closed in either first or fifth position.

D

[edit]

Danseur

[edit]

(French pronunciation: [dɑ̃sœʁ]) A male ballet dancer.

Danseur noble

[edit]

(French pronunciation: [dɑ̃sœʁ nɔbl]) A male ballet dancer who excels in refined classical roles, often playing the prince or other royalty in a classical ballet.

Danseuse

[edit]

(French pronunciation: [dɑ̃søz]) A female ballet dancer.

Déboulés

[edit]

(French pronunciation: [debule]); literally 'hurtled,' as in 'with great speed.') Another name denoting the same move as a chaîné (i.e. les tours chaînés déboulés). Small, very quick half-turns performed by stepping onto one leg, and completing the turn by stepping onto the other, performed on the balls of the feet or high on the toes, with the legs held very close together.

Dedans, en

[edit]

(French pronunciation: [ɑ̃ dədɑ̃]; 'inwards.') Inside movement.

  1. Circular movement where a leg that starts at the back or the side moves towards the front. For the right leg, this is a counter-clockwise circle. For the left leg, this is a clockwise circle. For example, in a rond de jambe en dedans, starting from first position, the foot first extends to tendu back, then moves to tendu to the side, and then tendu front, and back in again to first position.
  2. Turning motion in the direction of the supporting leg. In a pirouette en dedans, the dancer would turn to their right if their left leg was lifted, or vice versa. Opposite of en dehors.

Dégagé

[edit]

(French pronunciation: [deɡaʒe]; 'disengaged.') Common abbreviation for battement dégagé, the foot of the working leg sharply brushes through the floor through tendu pointed in the air 45 degrees or lower. Dégagé is part of the (initiating) execution of jumps such as jeté, assemblé, brisé, and glissade.

Primarily a Cecchetti/RAD term, this is known as battement tendu jeté in the Russian School or battement glissé in the French School.

Dehors, en

[edit]

(French pronunciation: [ɑ̃ dəɔʁ]; 'outwards.') Circular movement where a leg that starts at the front or the side moves towards the back. For a right working leg, this is a clockwise circle. For example, in a rond de jambe en dehors, starting from first position, the foot (either left or right) would first extend tendu front, move to tendu to the side, and then tendu back, and back in again to first position. In a pirouette en dehors, the body turns in the direction of the working leg (the leg raised in retiré passé). Opposite of en dedans.

Demi

[edit]

(French pronunciation: [dəmi]; meaning 'half.') Applied to plié, pointe, and other movements or positions to indicate a smaller or lesser version.

Demi-détourné

[edit]

(French pronunciation: [dəmi detuʁne]) A pivoted half turn executed on both feet. For example, if starting right foot front in fifth position, demi-plié and relevé onto demi-pointe while pivoting a half turn inwards/en dedans towards the direction of the back foot (here left). The feet will have now changed position with the left foot in front in fifth position.

Demi-pointe

[edit]

(French pronunciation: [dəmi pwɛ̃t]) Supporting one's body weight on the balls of one or both feet, heels raised off the floor.

Derrière

[edit]

(French pronunciation: [dɛʁjɛːʁ]; literally 'behind.') At or to the back. For example, a battement tendu derrière is a battement tendu to the rear.

Dessous

[edit]

(French pronunciation: [dəsu]; literally 'under.') Used to indicate that the front leg should be brought to close behind the other leg during a step. For example, assemblé, pas de bourrée, and glissade can be designated as under or dessous.

Dessus

[edit]

(French pronunciation: [dəsy]; literally 'over.') Used to indicate that the back leg should be brought to close in front of the other leg during a step. For example, assemblé, pas de bourrée, and glissade can be designated as over or dessus.

Devant

[edit]

(French pronunciation: [dəvɑ̃]; literally 'front.') Facing or moving to the front, as in tendu devant or attitude devant.

Développé

[edit]
Développé

(French pronunciation: [devlɔpe]) Common abbreviation for temps développé. A movement in which the leg is lifted to cou-de-pied or retiré and then fully extended outward, passing through attitude. It can be done to the front (devant), to the side (à la seconde), or to the back (derrière).

Double

[edit]

(French pronunciation: [dubl]; 'double.') Making two of a movement, such as in double rond de jambe en l'air.

E

[edit]

Écarté

[edit]

(French pronunciation: [ekaʁte]; literally 'spread,' as in 'separated.') One of the basic positions of the body facing the audience at an oblique angle and with the downstage leg open to the side of the body, along the other diagonal, either touching the floor or en l'air. The arm on the same side as the working leg (i.e. the downstage arm) is raised en haut and the other arm is in second position. The gaze is directed to the raised arm along the same diagonal

In schools that recognize an écarté derrière, such as the French school, écarté devant is described above, and écarté derrière differs in having the working leg in second being on the same side as the corner the body is facing, i.e. the upstage leg is the working leg; the upstage arm is en haut, and the gaze is directed down the length of the arm in second.

Échappé

[edit]

(French pronunciation: [eʃape]; literally 'escaped.') A movement done from a closed (first or fifth) position to an open (second or fourth) position. There are two kinds of échappés: échappé sauté and échappé sur les pointes or demi-pointes. In an échappé sauté, a dancer takes a deep plié followed by a jump in which the legs "escape" into either second (usually when initiating from first position) or fourth position (usually when initiating from fifth position) landing in demi-plié. In échappé sur le pointes/demi-pointes a dancer begins with a deep plié, springs onto les pointes or demi-pointes, ending in either second position (when starting from first position) or fourth (when starting from fifth) with knees straight. The dancer may or may not return to the initial position, depending on the choreography.

Élevé

[edit]

(French pronunciation: [elve]; 'raised, lifted.') Rising to pointe or demi-pointe from straight legs and flat feet.[4] This term is used in some schools in contrast with relevé (in effect, 'relifted'), which is taken to indicate a rise from plié (bent knees). In other schools (French, Russian, textbook Cecchetti), relevé covers both these concepts.

Emboîté

[edit]

(French pronunciation: [ɑ̃bwate])

  1. A small traveling step (en avant or en arrière) where each leg is alternately brought to cou-de-pied, passing the previous standing leg in doing so. Both legs shoot straight downward in the air, and land on one foot in cou-de-pied. This step is often done turning ("en tournant"), where each jump rotates 1/2 turn.
  2. A traveling series of jumps where each leg is alternately brought to attitude devant in the air, each foot passing the previous one in alternating.
  3. A series of small walks done on pointe or demi-pointe, traveling either forward (en avant) or backward (en arrière); the dancer stands in sous-sus and brushes one leg to the side, then closes it in the opposite position (front or back) of where it started, and repeats this motion several times in succession, alternating legs.
  4. A variation on the typical tour piqué/piqué turn, where the dancer does 1/2 piqué turn as usual, then, without coming off relevé, steps onto the previously working leg and lifts the previously supporting leg to retiré to finish the turn. This can be done several times in succession. (See "Piqué turn.")

En

[edit]

(French pronunciation: [ɑ̃]; meaning 'in.') A preposition used in description of a dancer's position (e.g., en plié, en relevé, en pointe) or holding the meaning 'towards' when describing direction of a movement (en avant, en arrière, en dedans, en dehors = 'to the front,' 'to the back', 'to the inside,' 'to the outside').

En avant

[edit]

See Avant

En arrière

[edit]

See Arrière

En cloche

[edit]

See Cloche

En croix

[edit]

See Croix

Front side back side ( in the shape of a cross )

En dedans

[edit]

See Dedans

Movement of the leg in an inwards rotation direction

En dehors

[edit]

See Dehors

En face

[edit]

See Face

En pointe

[edit]

See Pointe

Entrechat

[edit]

(French pronunciation: [ɑ̃tʁəʃa]; from Italian intrecciata, 'intertwined.') "A step of beating in which the dancer jumps into the air and rapidly crosses the legs before and behind."[5] In an entrechat quatre ('four'), starting from fifth position, right foot front, a dancer will jump up with legs crossed, execute a changement beating the right thigh at the back of the left thigh, then bring the right leg in front again beating the front of the left thigh, and land in the same position as started. In an entrechat six ('six'), three changes of the feet are made in the air, ultimately changing which foot is in front. Even-numbered entrechats indicate the number of times the legs cross in and out in the air: a regular changement is two (one out, one in), entrechat quatre is two outs, two ins; six is three and three; huit is four and four. Odd-numbered entrechats refer to the previous number, but done landing on one foot with the other in cou-de-pied: for example, an entrechat cinq (five) is the same as an entrechat-quatre, but done landing on one leg.

Entrée

[edit]

(French pronunciation: [ɑ̃tʁe])

  1. The initial part of a grand pas, which serves as an introduction for the suite of dances comprising the grand pas.
  2. The initial appearance of a lead character or characters of a ballet on stage.

An autonomous scene of ballet de cour, divertissement, comédie-ballet, opéra-ballet, even tragédie lyrique, which brings together several dancers in and out of the scenario.

Épaulé

[edit]

(French pronunciation: [epole]; 'shouldered.') One of the positions of the body or épaulement where the body is at an oblique angle to the audience, the downstage arm is allongé in front and the downstage shoulder appears prominent to the audience as the downstage leg works to the back (e.g. second arabesque).

Épaulement

[edit]

(French pronunciation: [epolmɑ̃]; 'shouldering.') Rotation of the shoulders and head relative to the hips in a pose or a step. This term relates only to the movement of the body from the waist up. The head generally looks over shoulder that is forward (downstage).

Étoile

[edit]

The leading ballet dancer in a company.

F

[edit]

Face, en

[edit]

(French pronunciation: [ɑ̃ fas]; 'facing, in front of.') En face indicates facing something directly, generally the audience.

Failli

[edit]

(French pronunciation: [faji] 'given way', past participle.) A slide or brush-through transition step following a preceding jump or position. Failli is often used as shorthand for a sissonne (ouverte +pas) failli, indicating a jump from two feet landing on one (sissonne) with the back foot then sliding through to the front (chassé passé), and this is often done in conjunction with an assemblé: (sissonne) failli assemblé. E.g. From croisé, the upstage leg opens behind on the sissonne as the body changes direction in the air to land ouverte effacé; the back leg which is now downstage slides through in a chassé passé to fourth in front, ending the dancer croisé the corner opposite the original. This chassé passé is the (pas) failli. An assemblé (dessus/over) to the opposite corner would reorient the body back to its original position. Failli phrased with arabesque indicates the brushed follow-through of an arabesqued leg from elevated behind to fourth in front as lead-in to a following step.

Turned out legs with the feet pointing in opposite directions, heels touching.

Fermé, fermée

[edit]

(French pronunciation: [fɛʁme]; 'closed.') Converse of ouvert(e) ('open'). Fermé may refer to positions (the first, fifth, and third positions of the feet are positions fermées), limbs, directions, or certain exercises or steps. Example: a sissonne fermée ends with closed legs, as opposed to a sissonne ouverte, which lands on one leg with the other (generally) extended.

Fish dive

[edit]
A fish dive lift

A partnering dance lift, often performed as part of a pas de deux, in which the male dancer supports the female in a poisson position.

Flic flac

[edit]

(French pronunciation: [flik flak]) Familiar French term for battement fouetté à terre. A step where the foot of the working leg sweeps flexed across the floor from pointed à la seconde (en l'air, as in dégagé) to pointed at cou-de-pied devant or derrière.

Fondu

[edit]
Fondu

(French pronunciation: [fɔ̃dy]; literally 'melted.')

  1. Abbreviation for battement fondu, a lowering of the body made by bending the knee of the supporting leg, the working leg extending out à terre or in the air. Saint-Léon wrote, "Fondu is on one leg what a plié is on two." Fondu at the barre often refers to battement fondu développé, where the supporting leg begins fondu with the foot of the working leg at cou-de-pied; the working leg extends out through a petit développé as the supporting leg straightens.
  2. A term used to modify any one-legged position in order to indicate a bent supporting leg (e.g. arabesque fondu).
Dancer performing Fouetté en tournant en dehors

(French pronunciation: [fwɛte]; literally 'whipped.') Fouetté itself refers to a move where a quick pivot on the supporting leg changes the orientation of the body and the working leg. E.g. A 180-degree or 90-degree fouetté could involve a working leg beginning extended elevated in front; the supporting leg rising onto demi-pointe or pointe quickly executing a "half" turn inside/en dedans, leading to the working leg ending in arabesque and the body now facing the opposite direction or stage direction. (This brand of action can be seen in both tour jetés and waltz turns (pas de valse en tournant).) A fouetté could also change the leg/body orientation from, for example, en face à la seconde to épaulé (second) arabesque/croisé first arabesque or effacé devant, if outside/en dehors, via a 45-degree turn.

Fouetté is also common shorthand for fouetté rond de jambe en tournant (pictured here en dehors). A fouetté turn is a turn that begins with the supporting leg in plié. As the supporting foot transitions to demi-pointe or pointe, in an en dehors turn, the working leg extends forward and then whips around to the side as the working foot is retracted to the supporting knee in retiré, creating the impetus to rotate one turn. The working leg returns out of retiré nearing the end of a single rotation to restart the entire leg motion for successive rotations.

Fouetté jeté

[edit]

(French pronunciation: [fwɛte ʒəte]) A leap that begins with a fouetté.

Frappé

[edit]
Frappé

(French pronunciation: [fʁape]; 'struck.') Abbreviation of battement frappé. Action of extending the working foot out from cou-de-pied. In Cecchetti, RAD, and American ballet, on flat, this action involves brushing a flexed (or non-pointed relaxed) foot from cou-de-pied through the floor, the ball of the foot (lightly) striking as extending out pointed through dégagé. In the Russian school, a pointed foot at cou-de-pied extends directly out to dégagé height without brushing through the floor. On demi-pointe, Cecchetti employs the Russian style of non-brushed pointed foot directly out. Other schools may use a flexed foot without the strike or a non-brushed pointed foot on demi-pointe.

Frappés are commonly done in singles, doubles, or triples. Double and triple frappés involve tapping the foot (flexed or pointed) at both cou-de-pied devant (or wrapped) and derrière before extending out. (E.g. Double frappé front would be cou-de-pied back, cou-de-pied front, dégagé front. Double frappé back would be front, back, [dégagé] back. Triple frappé front would be front, back, front, [dégagé] front.)

Fifth position

[edit]

A posture in which the feet are turned outward. With one foot in the front and one in the back, you will make fifth position. The front foot is usually facing horizontal while the back foot is diagonal. It does not matter which foot is in the front or back, as long as they are turned out. You can do pirouettes, changements, frappés, plies, and much more with fifth position.

G

[edit]

Gargouillade

[edit]

A complicated jump involving a pas de chat with a double rond de jambe.[6]

Glissade

[edit]

(French pronunciation: [ɡlisad]; literally 'glide.') A traveling step starting in fifth position from demi-plié. The leading foot brushes out to dégagé as weight bears on the trailing leg, weight is shifted to the leading leg via a jump and the trailing foot extends out of plié into degagé. The leading foot lands tombé and the trailing foot slides in to meet the leading foot in fifth position demi-plié. A glissade can be done en avant, en arrière, dessous (leading front foot ends back), dessus (leading back foot ends front), or without a changement of feet.

Glissade précipitée

[edit]

(French pronunciation: [ɡlisad pʁesipite]; "precipitated glide".) A quick glissade generally done leading into a following step, such as with glissade jeté or glissade assemblé.

Grand écart

[edit]

(French pronunciation: [ɡʁɑ̃t ekaʁ]; literally "big gap".) Opening the legs to 180°, front or sideways. Known as 'spagat' in German or 'the splits' or 'jump splits' in English.

Grand plié

[edit]

(French pronunciation: [ɡʁɑ̃ plije]) A full plié or bending of the knees. Throughout the movement, the pelvis should be kept neutral, the back straight and aligned with the heels, the legs turned out, and the knees over the feet. From standing to bent this should be fluid. A purpose of the grand plié is to warm up the ankles and stretch the calves. In a grande plié the heels come off the ground in first, fourth, and fifth position.

Grand jeté

[edit]
A grand jeté

(French pronunciation: [ɡʁɑ̃ ʒəte]) A long horizontal jump, starting from one leg and landing on the other. Known as a split in the air. It is most often done forward and usually involves doing full leg splits in mid-air. It consists basically of a grand écart with a moving jump. The front leg brushes straight into the air in a grand battement, as opposed to from développé (or an unfolding motion). The back leg follows making the splits in the air. It can be performed en avant (forward), à la seconde (to the side), en arrière (backward), and en tournant (turning en dedans). The dancer must remember to hit the fullest split at the height of the jump, with weight pushed slightly forward, giving the dancer a gliding appearance.

A suite of individual dances that serves as a showpiece for lead dancers, demi-soloists, and in some cases the corps de ballet. Often regarded as the pièce de résistance of a ballet. It usually consists of an entrée, a grand adage, and a coda, which brings the suite to a conclusion. After the adage, it may include a dance for the corps de ballet (often referred to as the ballabile), variations for demi-soloists, variations for lead ballerina and danseur, or some combinations of these.

Various types of "grand pas" are found in ballet, including:

  • A grand pas d'action is one that contributes to a ballet's story.
  • In a grand pas classique, classical ballet technique prevails and no character dances are included.
  • A grand pas de deux serves as the pièce de résistance for the principal male and female characters of a full-length ballet.
  • A grand pas danced by three or four dancers is a grand pas de trois or grand pas de quatre, respectively.

H

[edit]

Hortensia

[edit]

"A male dancer's step in which the dancer jumps into the air with the legs drawn up, one in front of the other, then reverses their position [...] several times before landing with the feet apart again."[7] This step can look akin to swimming in air.

J

[edit]

Jeté

[edit]

(French pronunciation: [ʒəte]; 'thrown.') A leap in which one leg appears to be thrown in the direction of the movement (en avant, en arrière, or sideways). There are several kinds of jetés, including jeté / jeté ordinaire (RAD) / pas jeté (Rus.), grand jeté, and tour jeté (ABT) / grand jeté en tournant (Fr./Cecc.) / jeté entrelacé (Rus.), or the common compound step coupé jeté (en tournant).

  • Jeté (jeté ordinaire/pas jeté) refers to a jump initiated en plié, with the pointed working foot brushing out in dégagé from cou-de-pied (derrière) to seconde (action similar to a non-Russian-style flat frappé), weight being transferred via a jump propelled by pushing off the standing leg from plié, the leading leg landing tombé and the foot of the other/former standing leg ending cou-de-pied (derrière). Some schools (including ABT at one point) may still refer to this as a petit jeté.
  • Grand jeté:
    Grand jeté.
    see grand jeté, a jump initiated with a grand battement en avant of the leading leg while pushing off the trailing leg from plié (usually led into by some moving step such as chassé, glissade en avant, or pas couru), the trailing leg brushing to grand battement derrière while in the air, the jump ultimately landing on the leading leg. Resembles the splits (en l'air).
  • Tour jeté / jeté en tournant ('turn'/'interlaced') is a grand jeté done turning: a jump initiated with a grand battement en avant of the leading leg, followed by a fouetté turning the direction of the body 180 degrees and the trailing leg brushing through to a grand battement derrière, the jump landing arabesque with the leading leg now the standing (landing) leg.
  • Coupé jeté en tournant is a compound step, usually done in multiples en manège ('in a circle'), of a coupé (changing the supporting foot) initiating the first quarter of a turn leading into a grand jeté completing the 360-degree rotation of the turn.
  • Petit jeté in RAD and the French school[5] refers to a one-footed changement passing through cou-de-pied and is what other schools refer to as a changement emboîté.

M

[edit]

Manèges

[edit]

Manèges is a classical ballet term meaning “circular.” It describes when a dancer does steps in a circular pattern around the stage.

Usually, manèges will be a repetition of one or two steps, but can also be a combination of several. For example, a coupé jeté manèges is typically done by a male dancer in a coda of a classical pas de deux. Ballerinas will often do piqué manèges in a variation or also in a coda.

O

[edit]

Ouvert, ouverte

[edit]

(French pronunciation: [uvɛʁ(t)]; 'open, opened.') Converse of fermé(e) ('closed'). Ouvert may refer to positions (the second and fourth positions of the feet are positions ouvertes), limbs, directions, or certain exercises or steps. In the French School, this term is used to indicate a position or direction of the body similar to[specify]

P

[edit]

Dancing performed by a pair of dancers, typically a male and a female, in which the pair strives to achieve a harmony of coordinated movements so that the audience remains unaware of the mechanics. A dance that is focused on a single pair of partnering dancers is a pas de deux. For a male dancer, partnering may involve lifting, catching, and carrying a partner, and providing assistance and support for leaps, promenades and pirouettes.

Pas

[edit]

(French pronunciation: [pɑ]; literally 'step.') A dance, or a suite of dances as in grand pas.

Pas de basque

[edit]

(French pronunciation: [pɑ d(ə) bask]; 'step of the Basques.') Halfway between a step and a leap, taken on the floor (glissé) or with a jump (sauté); it can be done moving toward the front or toward the back. This step can also be found in Scottish highland dance.

Starting in fifth position croisé, a dancer executes a plié while brushing the downstage leg out to tendu front. The downstage leg does a demi rond de jambe to the opposite corner while the body turns to face that corner. Weight is quickly transferred to that brushed leg, now upstage, allowing the dancer to pass the newly downstage leg through first position via a chassé passé to fourth devant, ending croisé the new corner, and finishing by bringing the upstage leg in to close fifth.

Pas de bourrée

[edit]
Jazz dance pas de bourrée, which differs slightly from ballet [clarification needed]

(French pronunciation: [pɑ d(ə) buʁe]; 'step of bourrée.') A quick sequence of movements beginning with extension of the first leg while demi-plié, closing the first leg to the second as both transition to relevé (demi-pointe or pointe), extending the second leg to an open position while relevé, and closing the first leg to the second in demi-plié (or optionally with legs straight if performed quickly or as the final step of an enchainement). Variants include:

  • pas de bourrée derrière – 'behind' / pas de bourrée devant – 'front'
  • pas de bourrée dessus – 'over,' initially closing the working foot in front / pas de bourrée dessous – 'under,' initially closing the working foot behind
  • pas de bourrée en arriere – 'traveling backward' / pas be bourrée en avant – 'traveling forward'
  • pas be bourrée en tournant en dedans – 'turning inward' / pas de bourrée en tournant en dehors – 'turning outward'
  • pas de bourrée ouvert – 'open,' an open->closed->open sequence
  • pas de bourrée piqué – 'pricked,' with working leg quickly lifted after pricking the floor
  • pas de bourrée couru – 'running,' also 'flowing like a river'

Pas de chat

[edit]
Pas de chat

(French pronunciation: [pɑ d(ə) ʃa]; 'step of the cat.') A traveling sideways jump where while mid-air the legs are successively bent, brought to retiré, feet as high up as possible, knees apart. The Dance of the Cygnets from Swan Lake involves sixteen pas de chat performed by four dancers holding hands, arms interlaced.

In the Cecchetti and French schools, this may be referred to as a saut de chat ('jump of the cat').

Grand pas de chat

[edit]

A jump where the leading leg extends forward through grand battement (a "French pas de chat") or développé (an "Italian pas de chat") and the trailing leg remains in retiré until landing.

"Russian" pas de chat

[edit]

A jump where the legs are successively brought to attitude derrière instead of retiré.[5] This variant of the pas de chat appears in several Petipa ballets (e.g. the fourth variation in Paquita).

Pas de cheval

[edit]

(French pronunciation: [pɑ ʃ(ə)val]; 'step of the horse.') A movement of the leg (when extended) through first or fifth position, to cou-de-pied and then energetically out to a pointe tendue through a petit développé.

('Step of two.') A dance duet, usually performed by a female and a male dancer.

Pas de poisson

[edit]

(French pronunciation: [pɑ pwasɔ̃]; 'step of the fish.') A type of soubresaut, or a jump without a change of feet. From fifth position, a dancer executes a deep demi-plié and then jumps arching the back with straight legs behind, so that the body is curved like a fish jumping out of water. Also called temps de poisson.

('Step of four.') A dance by four dancers.

('Step of three.') A dance by three dancers.

Pas de valse

[edit]

(French pronunciation: [pɑ d(ə) vals]; 'waltz step.') A sequence of three steps—fondu, relevé, elevé (down, up, up)—always advancing (like a march), done in three counts to music generally in 3
4
time, traveling in any direction or while turning (en tournant). The feet do not assemble (or "cross each other") on any step as occurs in a balancé; each step instead passes the last.

Passé

[edit]
Passé

(French pronunciation: [pɑse]; literally 'passed.') Passing the working foot through from back to front or vice versa. Generally used to refer to retiré passé, indicating passing the foot of the working leg past the knee of the supporting leg (on, below, or above) from back to front or front to back. Retiré passé may initiate or complete by sliding the working foot up or down the supporting leg from or to the floor, may be executed directly from an open position such as in pirouette from fourth, or may transition from knee to another position such as arabesque or attitude (as in développé). A chassé can also pass through from back to front as in (sissonne) failli: chassé passé.

Penché

[edit]
Arabesque penché

(French pronunciation: [pɑ̃ʃe]; 'tilted'.) Tilting the body forward about the hip of the supporting leg so that the head is lower than the working leg, as in arabesque penché. Doing a split while standing on one foot. The dancer lifts the leg more than 90 degrees.

Petit saut

[edit]

(French pronunciation: [p(ə)ti so]; 'small jump.') A small jump, in which the feet do not change positions in mid-air; also called temps levé sauté in the Vaganova vocabulary.

Piqué

[edit]

(French pronunciation: [pike]; meaning 'pricked.') A movement in which the raised, pointed foot of the working leg is lowered so that it pricks the floor and then either rebounds upward (as in battement piqué) or becomes a supporting foot. In the latter case, it may be used to transfer a stance from one leg to the other by stepping out directly onto an en pointe or demi-pointe foot and often immediately precedes a movement that entails elevating the new working leg, such as a piqué arabesque.

In Cecchetti and RAD, the term posé is used instead of piqué outside of the battement: piqué arabesque and ABT piqué turn/tour piqué (en dedans) / Rus. tour dégagé = RAD/Cecc. posé arabesque and posé turn/posé en tournant.

Piqué turn

[edit]

A tour piqué or piqué turn is a traveling turn executed by the leg stepping out onto an en pointe or demi-pointe foot becoming the supporting leg while the working leg moves from plié to retiré derrière, if an en dedans turn, or retiré devant, if an en dehors turn. In fast piqué turns, petit retiré may be executed instead (i.e. working foot at cou-de-pied). Most commonly done en dedans, piqué turns en dehors are also referred to as lame ducks.

Pirouette supported by male dancer

(French pronunciation: [piʁwɛt]) A non-traveling turn on one leg, of one or more rotations, often starting with one or both legs in plié and rising onto demi-pointe or pointe. The non-supporting leg is generally held in retiré devant ('front')—when initiated from fourth, this would be a retiré passé—but could also be held in other positions such as seconde. Pirouettes are most often executed en dehors, turning outwards in the direction of the working leg, but can also be done en dedans, turning inwards in the direction of the supporting leg. (e.g. En dehors turns clockwise (to the right) if the right leg is working and the left leg supporting/standing.) Spotting is employed to help maintain balance. A pirouette may return to its starting position or finish in arabesque or attitude.

In other genres of dance, such as jazz or modern, it is common to see pirouettes performed with legs parallel (i.e. sixth position) instead of turned out as in ballet.

Plié

[edit]
Demi-plié

(French pronunciation: [plije]; literally 'bent.') A smooth and continuous bending of the knees outward with the upper body held upright.

In demi-plié, (in a first, second, fourth, and fifth position) a dancer bends the knees while maintaining turnout. While in a demi-plié position one must remember to have proper alignment. Head over shoulders, shoulders over hips over knees and knees over feet. When initiating a demi-plié one must pull up and resist against going down. Lengthening from the center and back of the head and pressing down through the floor through the balls of the feet. As you are bending your knees you have to maintain the proper alignment and make sure that the knees are going over the big toe. Creating proper turn out by rotating the inner thighs forward and you go down. Making sure to keep the pelvis in line as you go down and up so that you do not release your seat and stick your chest forward. at the same time engaging your core (stomach) by pressing your naval towards your spine. The knees bending directly above the line of the toes without releasing the heels from the floor. As soon as the bottom of the bend is reached, the bend is reversed and the legs are straightened.

In grand plié, (in first, second, fourth, and fifth position) While doing a grand-plié position one must remember to have proper alignment. Head over shoulders, shoulders over hips over knees and knees over feet. When initiating a grand-plié one must pull up and resist against going down. Lengthening from the center and back of the head and pressing down through the floor through the balls of the feet. As you are bending your knees you have to maintain the proper alignment and make sure that the knees are going over the big toe. Heels come off the ground past demi-plié with the feet ending in a demi-pointe at the bottom of the bend. Making sure to create proper turn out by rotating the inner thighs forward and you go down. Making sure to keep the pelvis in line as you go down and up so that you do not release your seat and stick your chest forward, and at the same time engaging your core(stomach) by pressing your navel towards your spine. As soon as the bottom of the bend is reached, the bend is reversed and the legs are straightened. *Note: Heels do not come up off the floor in a second position.

Pointe, en

[edit]
An en pointe foot in a pointe shoe

(French pronunciation: [ɑ̃ pwɛ̃t]) Supporting one's body weight on the tips of the toes, usually while wearing structurally reinforced pointe shoes.

The part of classical ballet technique that concerns pointe work (dancing on the tips of the toes).

Pointe work

[edit]

Performing steps while on the tips of the toes, with feet fully extended and wearing pointe shoes, a structurally reinforced type of shoe designed specifically for this purpose. Most often performed by women.

Poisson

[edit]

(French pronunciation: [pwasɔ̃]; literally 'fish.') A body position in which the back is arched and legs are crossed in fifth position or the working leg is held retiré. This position may be assumed while jumping or in partnering lifts, as in a fish dive.

Port de bras

[edit]

(French pronunciation: [pɔʁ d(ə) bʁa]; 'carriage of the arms.') An exercise for the movement of the arms (and in some schools, the upper body) to different positions. For example, a basic port de bras exercise could move from fifth en bas ('low') (i.e. bras bas or preparatory position) to first arm position, to second arm position, back down to fifth en bas. A full port de bras could move from en bas to en haut ('high', i.e. overhead) and back down. Port de bras movements vary by school and by action.

The phrase port de bras is used in some schools and parts of the world to indicate a bending forward, backward, or circularly of the body at the waist, generally to be followed by bringing the upper body back to center/upright again, e.g. "port de bras forward", "port de bras back", "circular port de bras/grand port de bras". Bending at the waist is otherwise known as cambré.

Posé

[edit]

French pronunciation: [poze]; A term of the Cecchetti school and RAD. From a fondu, a dancer steps with a straight leg onto an en pointe or demi-pointe foot, then brings the working leg to cou-de-pied, so that if the step is repeated, the working leg will execute a petit développé. This can be done in any direction or turning (the later also known as tour piqué).

Arms held in Cecchetti's "Spanish fourth" position

There are two basic positions of the arms. In one, the dancer keeps the fingers of both arms almost touching to form an oval/round shape, either near the hips, at navel level, or raised above the dancer's head. In the other, the arms are extended to the sides with the elbows slightly bent. These positions may be combined to give other positions.

Different schools, such as Vaganova, French, and Cecchetti, Russian often use different names for similar arm positions. The Russian school names three arm positions while the other schools name five.

  • Bras bas ('arms low') (RAD)/bras au repos ('at rest') (French), preparatory position (Rus.), or fifth en bas (Cecc.) holds the arms low and slightly rounded near the hip.
  • First position holds the arms round or oval in front of the body somewhere between the naval and breastbone (depending on the school and movement), the fingertips of the hands approaching each other. In Cecchetti, the hands stay a little lower at tutu height.
  • Second position in all schools holds the arms extended out to the side, the inner part of the upper arm parallel to the ground with the forearms and palms facing the audience. The roundness and shoulder height of the arms varies by school.
  • Third position in the French/RAD schools holds one arm in second with the other arm in first. The Russian equivalent of this may be petit bras.[citation needed]
    • Third position in Cecchetti holds one arm in a Cecchetti first and the other arm in demi-seconde.
    • Third position in the Russian school holds both arms slightly rounded overhead. This is equivalent to fifth position (en haut) in other schools.
  • Fourth position or fourth ouvert ('open') consists of one arm en haut ('high,' i.e. raised overhead) and the other open to second position. This is called fourth en haut in Cecchetti. The Russian school does not designate a fourth position; the Russian equivalent may be grand bras.
    • Fourth position croisé ('crossed') or Spanish fourth in Cecchetti consists of one arm en haut and the other held in first position/Cecchetti fifth en avant.
  • Fifth position in the French/RAD schools and fifth en haut in Cecchetti holds the arms en haut slightly rounded, fingertips approaching each other. This is called third position in the Russian school, which does not designate a fifth (or fourth) position. Cecchetti also recognizes a fifth en bas, the preparatory/bras bas position in other schools, and a fifth en avant, arms rounded between naval/chest height, known as first position in other schools.

Additionally:

  • Demi-bras ('half arms') holds the arms between first and second position, outstretched with palms presented towards the audience.
  • Demi-seconde ('half second') holds the arms low out to the side as if grazing the tutu, palms generally down.

Positions of the body

[edit]

There are eight to eleven positions of the body in ballet, eight in Cecchetti and RAD and ten or eleven in the Russian and French schools. The general positions are croisé, à la quatrième, effacé, à la seconde, écarté, and épaulé. Cecchetti and RAD's eight include croisé devant, à la quatrième devant, effacé (devant), à la seconde, croisé derrière, écarté, épaulé, and à la quatrième derrière. The Russian school further divides effacé and épaulé into effacé devant, effacé derrière, épaulé devant, and épaulé derrière, and the Russian arm positions on croisé derrière are the converse of Cecchetti/RAD's. In addition, the French school further divides écarté into écarté devant and écarté derrière.

The standard, basic placements of feet on the floor. Modern-day classical ballet employs five positions, known as the first position, second position, third position, fourth position, and fifth position.

Pulling Up

[edit]

Pulling up is critical to the simple act of rising up on balance and involves the use of the entire body. The feeling of being simultaneously grounded and "pulled up" is necessary for many steps in ballet. To pull up, a dancer must lift the ribcage and sternum but keep the shoulders down, relaxed and centered over the hips, which requires use of the abdominal muscles. In addition, the dancer must stabilize the pelvis, maintaining a neutral position, and keep the back straight to avoid arching and going off balance.

Petit Battement

[edit]

Petit battement is when a ballet dancer swiftly moves his/her leg in front then behind their calf. This motion is normally done at the barre during warm-up. A more advanced dancer would only move their knee, to complete this action.

Q

[edit]

Quatre

[edit]

(French pronunciation: [katʁ]) Four of something, as in pas de quatre (a dance by four dancers).

Quatrième

[edit]

(French pronunciation: [katʁijɛːm]) Meaning 'fourth'.

R

[edit]

Renversé

[edit]

(French pronunciation: [ʁɑ̃vɛʁse]) An attitude presented on a turn.[8]

Relevé

[edit]
Relevé exercise at a barre

(French pronunciation: [ʁəlve]; 'raised, lifted.') Rising onto the balls (demi-pointe) or toes (pointe) of one or both feet. See also élevé.

Relevé lent

[edit]

(French pronunciation: [ʁəlve lɑ̃]; 'lifted slowly.') Abbreviation of battement relevé lent. Term from the Russian school indicating raising the leg slowly from pointe tendue to 45 degrees or higher off the ground. Contrasts with (battement) tendu jeté, aka dégagé, in which the leg brushes out propulsively from a high position through tendu to elevated off the ground, and (temps) développé, in which the leg passes through retiré (or petit retiré) to à la hauteur or demi-hauteur, i.e. elevated off the ground.

Retiré

[edit]
Working leg in retiré devant and retiré derrière

(French pronunciation: [ʁətiʁe]) A position of the working leg in which the leg is raised turned out and bent at the knee to the side so that the toe is located directly in front of (retiré devant) or behind (retiré derrière) the supporting knee. This is commonly used in pirouettes and as an intermediate position in other movements such as développé front.

Révérence

[edit]

(French pronunciation: [ʁeveʁɑ̃s]; 'reverence, bow.') A bow, curtsy, or grand gesture of respect to acknowledge the teacher and the pianist after class or the audience and orchestra after a performance. After a classical ballet, a bow or choreographed révérence may be performed in character.[9]

Revoltade

[edit]

(French pronunciation: [ʁəvɔltad]) A bravura jump in which one lands on the leg from which one pushes off after that leg travels around the other leg which is lifted to a level that is parallel with the floor. There are several variants, the passing leg may pass around the lifted leg in a passé position, or it may be extended and parallel to the lifted leg, or it may be extended and close to perpendicular to the lifted leg. This last variant is also known as a 540.

Rond de jambe

[edit]
Rond de jambe

(French pronunciation: [ʁɔ̃ d(ə) ʒɑ̃b]; meaning 'leg circle.') Half-circle made by the pointed foot, from fourth front or back through second position to the opposite fourth and returning through first position again to repeat, in effect tracing out the letter "D". Starting front going back is called rond de jambe en dehors while starting back and going front is called rond de jambe en dedans.[10][11]

  • Rond de jambe à terre/par terre: ('on the ground.') The extended leg with pointed toe remains on the ground to sweep around in a semi-circle.
  • Rond de jambe attitude: the leg is swung around from front to side and into attitude position behind as the supporting foot goes en pointe. (See also attitude.)
  • Rond de jambe en l'air: ('in the air.') The leg is lifted and sustained to the side (à la seconde), with movement being limited to below the knee. If the thigh is held at 90 degrees from the body, the toe draws a circle approximately between the knee of the supporting leg and second position in the air. If the thigh is held lower (e.g. 45 degrees), the circle is drawn to the calf of the supporting leg. This is commonly done in singles, doubles, and/or sauté.
  • Grand rond de jambe (en l'air): the leg is extended and sustained at grand battement height to draw a semi-circle in the air.
  • Demi-grand rond de jambe (en l'air): the leg is extended and sustained off the ground while moving from fourth devant or derrière to second or vice versa, thus drawing only half of the full semi-circle.[12]

Royale

[edit]

(French pronunciation: [ʁwajal]) Another name for changement battu. A changement with a beating of the legs preceding the foot change. Example: with the right foot in front in fifth position, plié, jump, beat the right thigh against the left (back thigh) and continue with a changement moving the right leg to behind the left, landing fifth position left foot front.

S

[edit]

Sauté

[edit]

(French pronunciation: [sote]; literally 'jumped.') Used to indicate a step executed jumping, e.g. sauté arabesque is an arabesque performed while jumping on the supporting leg.

Saut de chat

[edit]

(French pronunciation: [so ʃa]) In RAD and American ballet, saut de chat refers to a jump similar to a grand jeté differing in that the front leg extends through a développé instead of a grand battement. This is called a grand jété développé in other schools.

In the French and Cecchetti schools, saut de chat refers to what RAD/ABT call a pas de chat.

Scáfuri

[edit]

A rise, from flat to demi-pointe (from the balls to the tips of both feet), usually done multiple times in quick succession where the legs are turned out in a grand pas position.

Legs turned out with feet pointing in opposite directions and heels at least shoulder-width apart.

Sickle

[edit]

A term that refers to the reverse of a winging, indicating a foot where the heel is too far back so the toes are in front of the ankle and heel, breaking the line of the leg at the ankle. If a dancer sickles an en pointe or demi-pointe foot, the ankle could collapse to the outside, resulting in a sprain. A working foot should be straight to the side and mildly winged to the front or back.

Sissonne

[edit]
Sissonnes

(French pronunciation: [sisɔn]) Although commonly thought to mean a scissor step, sissonnes are in fact named after the originator of the step. There are many types of sissonne, but all push off the floor with two feet and land on one. A sissone simple/ ordinaire devant starts in fifth position, shows fifth position in the air and lands in cou-de-pied devant. A sissonne fermée (close) has the dancer perform a medium to large jump from two feet, springing in any direction and leaving an extended leg behind, the ‘fermé’ is then a fast closing of the extended leg back into fifth position. A sissonne ouverte (open) will finish in the extended position. Advanced dancers can often be seen splitting their legs in a sissonne fermée and ouverte, this has perhaps led to some believing sissonne to be a ‘scissor step’. For reference, ‘scissors’ in French is ‘Ciseaux’ [see-ZOH]. Pas de ciseaux [pah duh see-ZOH] - a scissor step, is in advanced step in which following a temps levé from the left leg with the right leg devant, the legs pass each other at the height of the jump and the left leg is then immediately thrust backwards to land on the right leg with the left leg in arabesque (en fondue).

Soubresaut

[edit]

(French pronunciation: [subʁəso]) A sudden spring or small jump from both feet, traveling forward in either first, third, or fifth position and landing on both feet in the same position as they started.

Sous-sous

[edit]

(French pronunciation: [su su]; literally 'under-under.') A relevé, or rise, into a tight fifth position, feet touching and ankles crossed, giving the appearance of one foot with two heels. A term from the Cecchetti school, sus-sous ('over-under') is the equivalent term in the French and Russian schools.[13]

Soutenu en tournant

[edit]

(French pronunciation: [sutny ɑ̃ tuʁnɑ̃]; 'sustained.') Similar to tours chaînés (déboulés), a soutenu turn is a turn usually done in multiples in quick succession. The dancer first executes a demi-plié while extending the leading leg in tendu, stepping onto that leg en pointe/demi-pointe (making it the standing leg), then bringing the other leg to fifth position in front of the standing leg and finally turning (effectively, an unwinding motion). At the end of the rotation, the originally crossed-over foot in front should now be in fifth position behind.

Common abbreviation of assemblé soutenu en tournant (Cecc.). This is known as a glissade en tourant in the Russian school.

When done at the barre en demi-pointe to switch sides, only half a turn is done instead of a full turn, and the foot does not extend out into tendu. Differs from a détourné in that there is a repositioning of the feet on finishing (and a crossing action, if not initiated in fifth) vs. just a pivot to half turn.

A configuration of the legs in which the legs are extended in opposite directions, either to the side (straddle split) or with one leg forward and the other back (front split). This is employed in various movements, including grand jeté and arabesque penchée.

Sur le cou-de-pied

[edit]

(French pronunciation: [syʁ ku pje]; literally 'on the neck of the foot.') The arched working foot is placed wrapped at the part of the leg between the base of the calf and the beginning of the ankle. On the accent devant (front), the heel of the working foot is placed in front of the leg, while the toes point to the back, allowing the instep (cou-de-pied in French) of the working foot to hug the lower leg. On the accent derrière (back), the heel of the working leg is placed behind the leg with the toes pointing to the back. The action of alternating between devant and derrière is seen in a petit battement.

T

[edit]

Tendu

[edit]
Tendu exercise at a barre

(French pronunciation: [tɑ̃dy]; literally 'stretched.') Gradually extending the working leg to the front (tendu devant), side, or back, passing from flat to demi-pointe to point where only the toes are touching the floor (tendu à terre), or only the pointed toes are elevated (en l'air). A common abbreviation for battement tendu.

Tights

[edit]

Most ballet dancers wear tights in practices and performances unless in some contemporary and character dances or variations.

Temps levé

[edit]

(French pronunciation: [tɑ̃ l(ə)ve]; literally 'time raised.') A term from the Cecchetti school indicating a hop on one foot while the other is raised in any position. The instep is fully arched when leaving the ground and the spring must come from the pointing of the toe and the extension of the leg after the demi-plié.

In the Cecchetti method, the specifically indicates a spring from fifth position while raising one foot to sur le cou-de-pied. In the Russian and French schools, this is known as sissonne simple.

Temps levé sauté

[edit]

(French pronunciation: [tɑ̃ l(ə)ve sote]; literally 'time raised jumped.') A term from the Russian school. This can be executed with both feet from first, second, third, fourth, or fifth position starting with a demi-plié, leading to a jump in the air that lands with the feet in the same position as they started. (Otherwise known as simply a saut or sauté.) This can also be performed from one foot, while the other maintains the same position it had before starting the jump (i.e. the same as temps levé).

Temps lié

[edit]

(French pronunciation: [tɑ̃ lje]; 'time linked.') A term indicating the transfer of weight from one leg to another by shifting through to the position without any sort of gliding or sliding movement.

Tours en l'air

[edit]
Tours en l'air.

(French pronunciation: [tuʁz ɑ̃ l ɛːʁ]; literally 'turn in the air.') A jump, typically done by males, with a full rotation in the air. The landing can be on both feet, on one leg with the other extended in attitude or arabesque, or down on one knee as at the end of a variation. A single tour is a 360° rotation, a double is 720°. Vaslav Nijinsky was known to perform triple tours en l'air.

Tombé

[edit]

(French pronunciation: [tɔ̃be]; literally 'fallen.') The action of falling, typically used as a lead-in movement to a traveling step, e.g. pas de bourrée. A tombé en avant begins with a coupé to the front moving to a dégagé to fourth position devant, the extended foot coming down to the floor with the leg en plié, shifting the weight of the body onto the front leg and lifting the back leg off the floor in dégagé (to fourth derrière). A tombé through second starts with a dégagé of the leading leg to second position, the leading foot coming to the floor with the leg in plié, and the trailing leg lifting off the floor in dégagé to (the opposite-side) second position. A tombé en avant can also be initiated with a small sliding hop instead of a coupé.

In the Vaganova school, the full term is sissonne ouverte tombée.

Triple Runs

[edit]

One big step, followed by two little steps, that can be done in a circle.

Turnout in first position of the feet

Rotation of the legs at the hips, resulting in knees and feet facing away from each other.

A classic ballet skirt, typically flat at the waist or hip level, made of several layers of tulle or tarlatan.

V

[edit]

A dance typically done solo.

A dancer with great technical ability and skill.

W

[edit]

Waltz

[edit]

A sequence of steps performed in sync with waltz music, as in pas de waltz en tournant.

See also

[edit]

Citations

[edit]
  1. ^ "Balletomane". merriam-webster.com. 2011. Retrieved December 23, 2011.
  2. ^ Barker/Kostrovitskaya: 101 Lessons in Classical Ballet - 1977
  3. ^ Vaganova, Agrippina (1969). Basic Principles of Classical Ballet: Russian Ballet Technique. Trans. Anatole Chujoy. New York: Dover Publications. ISBN 0-486-22036-2. OCLC 439604642.
  4. ^ Warren, Gretchen Ward. Classical Ballet Technique, University of South Florida Press, 1989, p. 15.
  5. ^ a b c Grant, Gail (1982). Technical Manual and Dictionary of Classical Ballet (3rd revised ed.). New York: Dover Publications. ISBN 0-486-21843-0. OCLC 8756882.
  6. ^ "Definition of GARGOUILLADE". www.merriam-webster.com. Retrieved 2021-01-13.
  7. ^ Grant, Gail. Technical Manual and Dictionary of Classical Ballet, Third Edition, Dover Publications, 1982, p. 62.
  8. ^ Jennings, Luke (10 November 2011). "MoveTube: Anthony Dowell dances the Prince's solo from Swan Lake Act I". Guardian. London, UK. Retrieved 12 June 2012.
  9. ^ "Ballet glossary - Royal Opera House". Archived from the original on October 16, 2011. Retrieved August 13, 2020.
  10. ^ Nelson, Thomas L. (2009). Rumba Dance Encyclopedi: And Related Dances. AuthorHouse. ISBN 978-1-4389-0100-8.
  11. ^ Clippinger, Karen S. (2007). Dance Anatomy and Kinesiology. Human Kinetics. ISBN 978-0-88011-531-5.
  12. ^ Grant, Gail. Technical Manual and Dictionary of Classical Ballet, Third Revised Edition, Dover Publications, Inc., 1982, p. 101.
  13. ^ Grant, Gail. Technical Manual and Dictionary of Classical Ballet, Third Revised Edition, Dover Publications, Inc., 1982, p. 113.

General sources

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
A glossary of ballet is a specialized that compiles definitions, origins, and explanations of the technical terms, positions, steps, and expressions essential to the practice and performance of , serving as an indispensable tool for dancers, instructors, choreographers, and audiences to master the precise language of this classical art form. These glossaries typically include hundreds of entries, often illustrated with diagrams or videos to demonstrate execution, and emphasize the codified vocabulary that ensures consistency across global ballet training and production. The terminology in ballet glossaries predominantly derives from French, reflecting the art form's formalization in 17th-century under King , who established the Académie Royale de Danse in 1661 to standardize steps and nomenclature through his dance master, Pierre Beauchamp. Although originated in the courts during the 15th century, its vocabulary evolved and was preserved in French due to the influence of the French court and the Paris Opéra , with terms like arabesque (a pose on one leg with the other extended behind) and jeté (a "thrown" leap) remaining in use worldwide today. This linguistic heritage underscores 's emphasis on discipline, grace, and technical precision, as glossaries not only define movements but also trace their etymological roots to everyday French words adapted for . Notable glossaries include Gail Grant's Technical Manual and Dictionary of (first published in 1950, with revised editions in 1967 and 1982), which features over 1,100 entries, including a 15-page pictorial guide illustrating foot, leg, arm, and body positions, making it a foundational text for study. Similarly, the American Ballet Theatre's online Ballet Dictionary, which includes key terms drawn from Grant's work, enhanced with video demonstrations by company dancers to show practical application in performance. These resources highlight ballet's evolution from courtly entertainment to a rigorous global discipline, where understanding the glossary enables precise communication and artistic interpretation across styles like the Vaganova (Russian), Cecchetti (Italian), and French methods.

Fundamentals and Technique

Ballet Technique

Ballet technique refers to the systematic method of achieving precise body control, alignment, and movement execution in , rooted in a vocabulary of terms originating from French during the 17th century under King and his dance master Pierre Beauchamp, who established the foundational positions and steps still used today. This approach emphasizes the dancer's ability to perform with apparent effortlessness, requiring rigorous discipline to maintain posture, balance, and fluidity across all movements. Central to ballet technique are its key components: strength for supporting dynamic actions like jumps and lifts; flexibility to enable extreme extensions and turns; coordination to synchronize limbs and torso seamlessly; and musicality to interpret rhythm and phrasing expressively. Alignment, particularly through elements like turnout from the hips, ensures efficient weight distribution and aesthetic lines, preventing injury while promoting longevity in training. These elements develop progressively, fostering both physical prowess and artistic interpretation. The historical evolution of ballet technique traces to the Romantic era (circa 1830–1870), when Italian choreographer and teacher Carlo Blasis first codified its principles in works like The Code of (1830), standardizing positions, steps, and body mechanics based on earlier French and Italian traditions to create a universal framework for training. This codification influenced subsequent developments, leading to modern variations across major schools: the , developed by Russian pedagogue in the early 20th century, integrates dramatic expression with athleticism; the , founded by Italian maestro around 1900, prioritizes clean lines and épaulement for precision; and the Royal Academy of Dance (RAD) syllabus, established in Britain in 1920, offers a graded, exam-based structure emphasizing musical coordination and safe progression. These schools adapt Blasis's foundations to cultural contexts while preserving core technical rigor. A typical daily ballet class follows a structured progression to build these skills: beginning at the barre for warm-up exercises like pliés and tendus to establish alignment and strength; moving to center work for adagio, which develops slow, controlled extensions and balance; followed by allegro for quick footwork, jumps, and turns to enhance coordination and power; and concluding with pointe work for advanced female dancers to refine elevation and stability. This sequence, practiced consistently from childhood, ensures comprehensive development of technique across all schools.

Turnout

Turnout in refers to the external of the s at the joints, which positions the feet outward from the body's centerline, ideally achieving a 180-degree total rotation or 90 degrees per leg for classical positions. This originates solely from the hips and is essential for the foundational stances used in . Anatomically, turnout is primarily generated by the six deep external rotator : the piriformis, superior and inferior gemelli, obturator internus, obturator externus, and quadratus femoris. A common misconception is that turnout can be forced by rolling the knees outward or gripping the feet, which actually compensates for limited hip and risks misalignment rather than true external rotation from the joint. The natural range of hip external varies by individual , typically averaging 45 to 60 degrees per hip in non-dancers and trained professionals alike, though demands pushing toward the upper limits of one's capacity without exceeding anatomical safe bounds. The importance of proper turnout lies in its role in creating the elongated, graceful lines central to ballet's aesthetic, while also providing enhanced stability during movements and reducing injury risk by distributing weight evenly across the lower limbs. Inadequate or forced turnout can lead to compensatory strains in the knees, ankles, and lower back, whereas correct application supports better control and prevents overuse injuries common in dance. This principle directly applies to the five positions of the feet, where turnout forms the base for alignment. Training turnout requires gradual progression to build strength and flexibility in the rotator muscles, often beginning with exercises like pliés to engage the while maintaining pelvic neutrality and to reinforce under body weight. Corrections for common faults, such as sickling—where the foot arches inward instead of pointing naturally—focus on visualizing a straight line from through to the second toe, using targeted strengthening to align the ankle and prevent compensatory rolling. Consistent practice emphasizes working within one's natural range to avoid , with professional dancers often incorporating supplemental hip mobility drills for sustained improvement.

Aplomb

In ballet, aplomb denotes the ideal vertical alignment and poised stability of the dancer's body, characterized by weight evenly centered over the feet, the head held in natural alignment with the spine, and controlled muscle engagement throughout the and limbs to ensure unwavering balance. This postural foundation allows for precise control and graceful execution of movements, embodying perpendicularity, sureness, and overall postural integrity as essential to classical technique. The concept draws from its French etymology "à plomb," literally "according to the plumb," referring to the plumb line—a weighted tool in used to verify vertical straightness—and metaphorically represents the dancer's need for unyielding steadiness akin to a perfectly aligned . Key components include balanced weight distribution to prevent shifting, shoulders maintained in a relaxed yet engaged position to support the upper body without undue tension, and a forward-directed that reinforces mental focus and physical poise. Turnout aids in sustaining aplomb by facilitating optimal leg alignment and weight placement. Aplomb is cultivated primarily through adagio training, involving slow, sustained movements that enhance core strength, , and endurance, as well as center floor exercises that challenge balance without barre support, progressively building the dancer's ability to hold vertical poses independently. Frequent challenges in achieving aplomb include swaying from side to side or forward leaning, typically stemming from improper weight centering or weak postural awareness, which can be addressed by consciously activating the core muscles—such as drawing the toward the spine—to anchor the and restore equilibrium.

Barre

In ballet training, the barre is a fixed, stationary mounted along the walls of , providing essential support for dancers during initial warm-up exercises to develop strength, balance, and control. This tool allows performers to focus on precise body placement and technique without the immediate demands of full balance, serving as the foundational phase of a standard class. Barre work typically follows a structured sequence, beginning with pliés to warm the joints and muscles, progressing to tendus for foot articulation and leg extension, and culminating in battements—such as battement tendu or grand battement—to build leg strength and coordination. This progression lasts approximately 45 to 60 minutes in a 90-minute class, occupying the first half to ensure gradual preparation for more dynamic movements. Dancers face the barre initially for support with both hands, then transition to one-handed or releve positions as exercises intensify, repeating combinations on each side to reinforce symmetry. The primary benefits of barre exercises include enhanced alignment by promoting proper and , increased flexibility through controlled stretches, and greater precision in movements that translate to center work. By isolating muscle groups and minimizing fall risk, it fosters and joint awareness, reducing injury potential while building endurance for advanced techniques. Studios often employ single barres for compact spaces or adult classes, whereas double barres—with an upper rail at about 41 inches and a lower at 28 inches—accommodate varied heights, making them ideal for mixed-age groups or younger students. Historically, the systematic use of the barre emerged in the early , credited to Italian choreographer and theorist Carlo Blasis, who integrated it into training regimens during the Romantic era to standardize technique across European academies. Modern adaptations vary by school: the emphasizes slow, sustained repetitions for fluidity; Cecchetti prioritizes quick precision and épaulement; and the Royal Academy of Dance (RAD) incorporates progressive complexity to suit graded syllabi, reflecting national influences while maintaining core principles.

Positions of the Feet

First Position

First position is the foundational closed stance of the feet in technique, characterized by the heels pressed together and the toes turned outward to form a straight line, creating a V shape with the feet. This position establishes the basic alignment for turnout, originating from the hips rather than the ankles or knees, ensuring the legs remain straight and the weight is evenly distributed. Proper execution demands full , achieved through external rotation of the s using the and inner thighs, while the calves ground the body by pushing energy downward. The heels are ideally touching with no significant distance between them, though individual anatomical differences may necessitate a minimal separation to avoid bending. Common faults include over-rotation of the feet, which exceeds natural hip turnout and leads to strain or misalignment, as well as allowing the arches to collapse, potentially causing flat-footedness if supporting muscles like the tibialis posterior weaken. As a core element of ballet fundamentals, serves as the starting point for pliés and numerous other steps, such as tendus and battements, facilitating smooth transitions and building strength during barre work and center practice. While the standard form is closed, variations occasionally incorporate a slight opening of the heels for specific exercises, distinguishing it from the wider, parallel open stance of second position. Turnout is essential for maintaining proper form throughout.

Second Position

Second position is one of the five basic positions of the feet in , characterized by the feet being turned out and placed parallel to each other on the same line, separated by a distance of approximately one foot or shoulder-width between the heels. The toes point outward in alignment with the natural turnout from the hips, typically aiming for a 90-degree angle, while the weight is evenly distributed across both feet to promote stability. This open configuration allows for greater freedom of movement compared to closed positions. In execution, the dancer maintains level hips and soft knees aligned over the toes, avoiding locked joints to facilitate smooth transitions and prevent strain. The upper body remains upright with engaged core muscles, supporting overall aplomb. This position is particularly useful for sustaining balance during extensions, such as à la seconde, where one leg is raised to the side while the supporting leg remains grounded. Second position serves as a foundational stance in various exercises, including pliés and , which build strength and coordination. It also functions as a preparation for dynamic movements like sautés and écarté jumps, where the open leg placement enhances spatial awareness and propulsion. For optimal alignment, dancers should prioritize initiated from the hips rather than forcing the feet, and avoid sinking into the hips to maintain pelvic neutrality and reduce injury risk.

Third Position

In third position, one foot is placed in front of the other in an asymmetrical alignment, with the heel of the front foot touching the instep or arch of the back foot approximately midway, while both feet are turned out equally from the hips to maintain proper rotation. This position requires the supporting foot to be fully turned out, providing a stable base, though the overlapped placement creates a narrower stance compared to other positions. The arms typically complement the feet, with one arm rounded in front () and the other extended to the side (second position), though variations exist across ballet schools. Execution of third position involves two primary variations: one with the right foot in front (right third) and the other with the left foot in front (left third), allowing for balanced of both sides. Weight distribution can shift forward onto the front foot for preparatory movements or backward onto the supporting back foot for stability, depending on the subsequent step, while keeping the knees soft and aligned over the toes to avoid strain. Third position is employed in linking steps such as certain pas de bourrée variations and waltz-like sequences, where the partial overlap facilitates quick transitions, as well as in some adagio work to build control before advancing to more demanding poses. Historically, it held greater preference in the French school of , where the five positions were codified in the under Pierre Beauchamps for court dances, emphasizing elegance in asymmetrical lines. In modern adaptations, third position is often replaced by fifth position for enhanced stability and in professional repertoires, serving primarily as an intermediate tool for beginners to develop the coordination needed for closed positions. To maintain even rotation, relies on the principles of , ensuring both hips rotate outward without forcing the knees.

Fourth Position

In ballet, the fourth position places one foot directly in front of the other, separated by approximately one foot, with the heels aligned to form a staggered open stance. This position emphasizes opposition and stability, distinguishing it from the more compact fifth position by allowing greater separation for dynamic transitions. The position features two primary variants: the open fourth, in which the feet are separated by approximately one foot without crossing or overlap, with the front foot pointing forward and the back foot turned out fully, and the closed fourth (also called fourth croisé), where the heel of the front foot aligns with the of the back foot for a more overlapped configuration. In execution, the front foot points straight ahead while the back foot turns out fully, maintaining turnout from the hips; the weight distributes evenly across both feet, with knees straight and feet fully pointed to ensure balance and alignment. Proper weight placement prevents shifting onto the back foot, which could compromise aplomb. Fourth position is commonly used as a preparatory stance for several key movements, including pirouettes, where the offset feet provide for en dehors or en dedans. It also supports développés by offering a stable base for unfolding the working leg with control, and serves as a starting point for promenades, enabling smooth, supported turns on the supporting leg while the other maintains contact or extension. Often, it combines briefly with épaulement to add directional emphasis through subtle body and head adjustments. A frequent fault in fourth position is misalignment, such as uneven heel alignment or excessive forced from the feet rather than the hips, which generates on the and increases risk to the lower extremities. Correcting this involves monitoring knee tracking over the toes and engaging core muscles for integrated alignment.

Fifth Position

The fifth position is a closed stance in where the feet are turned out from the hips, with the of the front foot precisely aligned against the of the back foot, creating a straight, tight line along the floor. This alignment demands maximum , typically a 90-degree external of each leg from the hip joint, to ensure the feet form a continuous extension without gaps or overlaps. Execution of fifth position includes two mirror-image versions: one with the right foot in front (heel touching the left toe) and the other with the left foot in front (heel touching the right toe), allowing for symmetrical training and choreography. Achieving a true fifth without strain is among the most challenging aspects of , as it requires exceptional hip flexibility and strength to maintain full while avoiding compensatory twisting in the knees or ankles, which can lead to if forced. Dancers often spend years developing this capacity, as natural varies and incomplete can compromise stability. In practice, fifth position serves as a foundational stance for numerous dynamic movements, particularly jumps such as the assemblé, where both feet assemble in the air before landing simultaneously in fifth, and beaten variations like entrechats that depart from and return to this crossed base for elevation and precision. It is also indispensable in pointe work, where dancers frequently execute steps like piqué or relevé en pointe from fifth to maximize balance and line. This position's compact form enhances impulsion and control, making it central to allegro combinations and grand battements. The fifth position was codified as part of the five basic foot positions by French choreographer and dancer Pierre Beauchamp in the late 17th century during his tenure as to King Louis XIV, formalizing classical ballet's foundational geometry. While the core form remains consistent across schools, subtle variations exist; for instance, the Cecchetti (Italian-influenced) method specifies that in fifth, the feet cross such that the first joint of the big toe of the front foot extends slightly beyond the heel of the back foot, emphasizing a more pronounced overlap compared to the stricter heel-to-toe precision in French and Vaganova traditions.

Positions of the Arms and Port de Bras

Positions of the Arms

In , the positions of the arms refer to the standardized configurations that contribute to balance, aesthetic , and expressive lines throughout a dancer's body. These positions are preparatory and sustaining poses that complement the movements of the lower body, with variations across training methods but a shared emphasis on graceful, controlled form. Common positions include bras bas, en avant (or preparatory position), à la seconde, en haut, and the historical bras croisé, each designed to support stability and fluidity in performance. The execution of arm positions prioritizes rounded elbows to avoid stiffness, soft and relaxed fingers that neither clench nor splay excessively, and overall between the arms to create balanced opposition with the legs. Shoulders remain down and relaxed, while the arms form gentle curves resembling an oval shape in many configurations, ensuring the upper body appears elongated and poised. This approach maintains a sense of lightness and continuity, preventing tension that could disrupt the dancer's line. Bras bas (low arms) is the foundational preparatory position, where both arms hang relaxed and rounded in front of the thighs, with palms facing the body and fingertips lightly touching or nearly so, elbows slightly bent outward. This position grounds the dancer, providing a stable starting point for exercises at the barre or in the center. En avant (forward or preparatory position) involves curving both arms forward at waist height, forming a rounded oval with hands facing inward and elbows supported to the sides, often used to initiate movements like pliés or ports de bras. It emphasizes a gentle forward reach without locking the joints. À la seconde (to the second) extends the arms horizontally to the sides at level, with a slight bend in the elbows and palms facing downward or forward, creating a wide, open line that aids lateral balance during steps like tendus or balances. The height is typically even with the s, though subtle adjustments occur for stylistic nuance. En haut (high or overhead) raises both arms above the head in a curved, oval formation, with elbows rounded and hands softly positioned so the palms face partially inward, often employed in grand allegro or poses to elongate the . This position requires core engagement to prevent strain. Bras croisé (crossed arms), a historical position less common in modern training but retained in certain classical variations, places one arm curved in in front of the body with the other extended in second position, creating a crossed effect relative to the dancer's orientation; it derives from earlier choreographic conventions for dramatic emphasis in classical ballets. These positions are coordinated with foot placements to enhance equilibrium, as the arms' extension or contraction counterbalances leg actions, promoting aplomb and spatial awareness. Historically, they evolved from the elaborate, gestural arm movements of court dances in and , where was conveyed through poised, symmetrical poses that transitioned into the codified technique under Louis XIV's influence. School-specific variations highlight interpretive differences: the , developed by , stresses fluidity and organic integration, with three primary positions—first (curved forward at solar plexus height), second (sides with minimal bend), and third (overhead with visible palms)—to foster expressive, seamless phrasing. In contrast, the prioritizes precision and geometric clarity, utilizing five distinct positions (en bas, en avant, à la seconde, en haut, and variations like en arrière) with defined wrist leads and lower arm placements to ensure sharp, architectural lines. These static configurations form the foundation for port de bras, the fluid carriage and transitions between them.

Port de Bras

Port de bras refers to the carriage and movement of the arms, shoulders, and head in , designed to create elegant lines and enhance the overall aesthetic of the dancer's form. This dynamic element frames the movements of the lower body, contributing to the fluidity and expressiveness essential to technique. As described in Agrippina Vaganova's foundational text, port de bras involves coordinated actions that integrate the upper body to support balance and projection, often transitioning between established arm positions to maintain with legwork. Key principles of port de bras emphasize smooth, continuous transitions that oppose the legs for balanced coordination, ensuring the arms do not disrupt the dancer's aplomb while accentuating . These movements require strength in the shoulders and back to avoid tension, promoting a sense of elongation and breath that aligns with the rhythm of the music—starting softly and building to fuller extensions as needed. According to ballet mistress Ponomarenko of , effective port de bras "creates colors" in performance, infusing vitality and vibrancy by varying the quality of arm flow to evoke emotion without sacrificing precision. In practice, opposition ensures that as one leg extends, the arms counterbalance by curving or opening in the opposite direction, fostering a seamless connection between upper and lower body. Exercises for port de bras typically occur during adagio sections of class, where dancers perform circular or linear sweeps of the arms to develop fluidity and control, often combined with slow leg developments or balances. Across-the-floor progressions, such as promenades in attitude or arabesque, incorporate sweeping arm gestures to practice phrasing, starting from preparatory positions and flowing through rounded or extended paths to build endurance and grace. In the , a sequence of six progressive port de bras exercises trains these skills, beginning with simple forward and backward reaches and advancing to incorporate torso undulations for expressive depth. Stylistically, port de bras in prioritizes emotional expressiveness through softer, more lyrical curves that convey narrative feeling, as seen in works like , where arms evoke ethereal longing. In contrast, , exemplified by , stresses precision and geometric clarity in arm movements, with sharper transitions and sustained lines to highlight technical virtuosity and symmetry. This distinction allows dancers to adapt port de bras to the era's demands, balancing fluidity with discipline to enhance both and formal beauty.

Bras Croisé

Bras croisé, translating to "crossed arms" in French, is an arm position in where one is extended in second position away from the audience and the other is curved in in front of the body, with palms facing inward, creating a crossed effect relative to the dancer's croisé body orientation. This placement corresponds to the fourth position en avant in the , with one raised to the gateway (fifth position en avant) before crossing to form the position. The execution emphasizes the continuous curve of the port de bras, keeping elbows slightly bent and shoulders relaxed to maintain fluidity and elegance; variants exist for the right arm extended (bras croisé droit) or left arm extended (bras croisé gauche). As a variant of standard positions of the arms, it adds emphasis during transitions or poses. In 19th-century s, bras croisé served for dramatic effect and stylistic flourish, particularly in Marius Petipa's choreography. Though integral to Petipa-era aesthetics, its use has become less prevalent in modern interpretations of the repertory.

Body Orientations and Épaulement

En Face

En face refers to a fundamental body orientation in classical ballet where the dancer faces the audience directly, with the hips and shoulders aligned squarely forward and no twist in the . This position ensures the body is presented in a straightforward, unangled manner, fully revealing the dancer's form without camouflage from curves or profiles. In practice, en face serves as the default orientation for solos, center-floor exercises, and symmetrical movements, such as tendus, grand battements, développés, and piqué walks. It is commonly employed in barre and center work to build foundational alignment before introducing more complex directional shifts. To execute en face, the dancer positions the feet in one of the five standard positions, maintains an upright posture with the directed frontally, and avoids any or hip rotation, creating a clean, two-dimensional profile that contrasts with more dynamic angled facings. The importance of en face lies in its role as the baseline for épaulement, emphasizing precision, vulnerability, and clarity in movement directions, which enhances spatial awareness both in training and performance. In classical variations, it provides essential clean lines that highlight technical accuracy and the dancer's full , contributing to the overall aesthetic balance of a piece.

Croisé

Croisé (pronounced kroh-zay) is a fundamental position of épaulement in , where the dancer's legs cross and the body is positioned at an oblique to the audience, typically facing one of the stage corners. This orientation involves a slight turn of the s and hips, creating a twisted or crossed line that aligns the working leg and the relative to the audience's perspective. The position emphasizes coordination between the lower body, , and head, with the dancer looking over either the front or back while maintaining the overall . In execution, croisé is divided into devant (front) and derrière (back) variations. In croisé devant, the working extends forward and crosses in front of the supporting , with the near side of the body directed toward the , enhancing the sense of depth and alignment. Conversely, croisé derrière features the working extended backward, crossing behind the supporting , often used to accentuate extension while keeping the body turned away from direct frontality. These forms require precise turnout and stability to avoid distorting the line, and they are commonly practiced at the barre or in center work to build épaulement awareness. Croisé is widely employed in movements such as arabesques, where it positions the extended leg to create a continuous, elongated that appears to stretch the dancer's height and form. It also serves as a preparatory stance for pirouettes, allowing the crossed alignment to facilitate rotation while maintaining balance and directional focus. This position contributes to dramatic poses by producing a visually compact yet dynamic line, often highlighting through the interplay of crossed elements and subtle twist.

Effacé

Effacé (pronounced eh-fah-say), meaning "shaded" in French, is a key body orientation in where the dancer stands at an oblique angle to the audience with open, uncrossed legs, partially or hiding one side of the body from view. This position creates an unveiled profile that emphasizes length and flow, contrasting with the crossed lines of croisé. It features two main variants: effacé devant, where the working leg extends forward along the diagonal, and effacé derrière, where it extends backward. In both, the body faces a front corner with the aligned to reveal the extended leg openly, the directed over the toward the , and the arms positioned to elongate the line, often with one arm extended forward and the other slightly back. The supporting leg remains in a turned-out position, such as first or fifth, to maintain balance and turnout. Effacé is used in poses like arabesque effacée or attitude effacée, as well as steps such as balancé effacé or assemblé effacé, to highlight spatial depth and graceful transitions. It builds awareness of open alignment in center work and supports expressive phrasing in performance by showcasing the dancer's form without obstruction.

Écarté

Écarté, derived from the French word meaning "separated" or "thrown wide apart," refers to a specific orientation of the body in where the dancer faces one of the two front corners of the studio or stage. In this position, the body is turned to the side with one directed forward toward the , while the hips remain square to the diagonal or only slightly angled, creating an open profile that highlights the dancer's lines and épaulement. The supporting leg is typically placed in second position on the floor, and the working leg is extended to the side in a high second position, often at 90 degrees or more, with the erect and the head turned toward the for engagement. The arms are positioned in attitude, with one curved forward and the other extended to enhance the body's elongation. This orientation is employed in various ballet elements to emphasize the dancer's side profile and spatial awareness, including jumps such as sautés or jetés executed on the diagonal, extensions like développés à la seconde, and promenades that rotate the body to reveal dynamic lines. Écarté allows for a clear demonstration of balance and control, particularly when combined with port de bras to accentuate the separation between the upper and lower body. It supports movements directed de côté, reinforcing sideward extensions and travels. Écarté has two primary variants: écarté devant, where the working leg extends forward from the dancer's perspective on the diagonal, and écarté derrière, where the working leg extends backward, both requiring precise épaulement to maintain alignment and avoid twisting the hips. In écarté devant, the head often tilts toward the raised arm, while in écarté derrière, the gaze may direct away to elongate the line. These variants underscore the position's role in building nuance in body placement. Historically, écarté gained prominence in neoclassical ballet through the choreography of George Balanchine, who utilized it extensively in works like Square Dance to achieve clarity and geometric precision. In the Balanchine style, as taught at the School of American Ballet, the dancer maintains hips and shoulders squarely aligned to the diagonal, ensuring an uninterrupted straight line from the extended leg through the arms, which enhances the modern, streamlined aesthetic over more curved classical interpretations. This approach prioritizes visual impact and rhythmic flow in center work and solos.

Épaulement

Épaulement, derived from the French word meaning "shouldering," refers to the precise and subtle alignment of the shoulders, head, neck, and upper torso in relation to the lower body during movements. This technique creates a three-dimensional quality to the dancer's form by introducing a slight angular opposition or twist in the upper body, which contrasts with the more rigid, square alignment of the hips and legs. Key elements of épaulement include the controlled tilt of the head—often described as offering one cheek forward—and the opposition of the shoulders to enhance line and flow, fostering an illusion of upward spiraling energy. It integrates seamlessly with body orientations such as croisé, effacé, écarté, or en face, where the shoulders angle to accentuate the diagonal or emphasize openness through torso placement. In performance, épaulement enhances the emotional phrasing of adagio phrases and character variations by adding nuance and expressiveness, allowing dancers to convey subtle through upper body gestures without disrupting the classical line. Michel Fokine's early 20th-century reforms, which promoted naturalism over rigid academicism, highlighted the role of fluid épaulement in ballets like Les Sylphides to liberate movement and ensemble dynamics for greater dramatic impact. Training épaulement begins at the barre once students master en face positions, isolating upper body adjustments during exercises like tendus and dégagés in croisé and effacé to build coordination and core strength while preventing over-twisting of the or . Teachers emphasize feeling the movement internally rather than relying solely on mirrors, ensuring the shoulders remain relaxed and opposed without excessive that could strain alignment.

Directional and Preparatory Terms

En Avant

En avant is a fundamental directional term in , derived from French meaning "forward." It specifies that a step, , or movement is performed toward the front, typically in the direction of the or the front of the dancer's body. This term is essential for indicating progression in various exercises and , distinguishing forward motion from other orientations. En avant denotes that a given step is executed moving toward the . In execution, en avant movements require the leg or body to advance forward while preserving aplomb, the upright poise and balance that maintains the dancer's stability. For instance, in battements or jetés en avant, the working leg extends toward the front without disrupting the body's alignment. This forward inclination can be enhanced through penché en avant, where the torso bends forward from the hips—often in an arabesque—with a straight spine and extended leg, creating depth and line while upholding equilibrium. Similarly, the ballet terms glossary notes that en avant directs steps toward the audience, underscoring precise forward propulsion. En avant is commonly applied in both adagio and allegro sequences, such as assemblés en avant, where the dancer jumps forward assembling the feet in the air, or développés en avant, unfolding the leg forward to build extension. In traveling steps like glissades or brisés en avant, it propels the entire body forward, generating momentum essential for dynamic phrasing in allegro work. The dictionary highlights its use in assemblés executed en avant, illustrating its role in forward-directed jumps. Brighter Days Dance's ballet dictionary provides the example of glissade en avant as a step forward. This contrasts with static placements like devant, which refers specifically to leg positioning in front but shares etymological roots with en avant for forward emphasis. In allegro, en avant execution fosters forward drive, enhancing the energetic flow of sequences without sacrificing form.

En Arrière

En arrière, a French term meaning "backward" or "to the back," serves as a directional indicator in for executing steps or extensions toward the rear of the dancer's body. This term directs the performer to move away from the or extend a limb rearward, contrasting with forward-oriented actions to create dynamic spatial variation in choreography. It is fundamental in maintaining the ballet's aesthetic of elongated lines and balanced opposition. In execution, en arrière involves controlled backward motion or , preserving the dancer's —wherein the hips rotate outward to align the feet and legs in the classical manner—and straight knees to ensure precise, extended lines without collapse. For leg extensions en arrière, such as in grand battement en arrière, the working leg brushes forcefully off the floor to a high rearward position, often up to 90 degrees or more, while the supporting leg remains stable and the torso stays upright or slightly arched to elongate the arabesque silhouette. Traveling steps like en arrière require smooth, gliding footwork that propels the body rearward with minimal , emphasizing fluidity and opposition between arms and legs. The term finds frequent application in exercises and , notably in grand battement en arrière to develop strength and flexibility in the rear , and pas de bourrée en arrière, a small, weaving step that travels backward while alternating feet in fifth position. These movements highlight arabesque lines, where the rear extends fully behind the body for poised balances, and retreats that build tension through spatial recession. In classical solos, en arrière elements provide dramatic contrast, accentuating themes of withdrawal or elegance, as seen in varied repertory works. Derrière denotes a static placement behind, whereas en arrière specifies dynamic rearward travel.

Devant

In ballet, devant (pronounced duh-VAHN), meaning "in front" in French, refers to the directional placement of the working or limb positioned in front of the supporting . This term is applied to various steps, movements, or positions where the working extends or bends forward relative to the body, often at an angle of 90 degrees or higher from the supporting to emphasize extension and line. The usage of devant appears in foundational exercises and poses, such as battement tendu devant, where the foot brushes along the floor to extend forward; rond de jambe (either à terre or en l'air), which may begin or conclude with the sweeping to the front; and attitude devant, a bent-knee pose where the raised curves forward at approximately 90 degrees, mimicking a classical . These applications create dynamic opposition between the working and the or arms, enhancing spatial contrast and expressive flow in . Execution requires the working to remain at hip height with hips squared and level, avoiding pronation—excessive inward rolling—of the foot or hip joint to preserve turnout and alignment. Proper devant placement is crucial for balance in turns, as it allows the dancer to use counter-tension from the forward to stabilize the axis during rotations like pirouettes or fouettés, where the leg may pass through or momentarily hold in front. The French school, originating many classical ballet terms and techniques, particularly favors emphasis on devant positions for their role in cultivating precision, lightness, and coordinated opposition in movement.

Derrière

In ballet, derrière refers to the placement of a limb, typically the working leg, behind the supporting leg or the body as a whole. This directional term, pronounced "deh-RYEHR," indicates a backward orientation and is fundamental to positions such as arabesque and retiré, where the raised leg extends or bends behind while maintaining alignment with the torso. The term is commonly used in steps like jeté en arrière, a leaping movement where the working is thrown backward to create propulsion and extension, and fouetté en tournant, a turning step that often incorporates attitude derrière to whip the around the body for rotation. These applications emphasize the development of back strength, as the dancer must engage the erector spinae and to lift and hold the without compromising balance or form. Execution of derrière requires full extension of the working leg while avoiding arching of the lower back, which can lead to strain; instead, dancers focus on stabilizing and to prevent hyperextension. Turnout must be preserved throughout, with the supporting leg rotated outward from the to support the backward line and ensure proper hip alignment. This technique not only prevents but also enhances the pose's stability during dynamic movements. Aesthetically, derrière contributes to an elongated , particularly in arabesque, where the extended back and aligned create a graceful, linear profile that exemplifies 's emphasis on harmonious proportions. This visual extension highlights the dancer's control and poise, often referenced in traveling steps like those en arrière for fluid progression across the stage.

De Côté

In , de côté (pronounced [duh koh-TAY]) refers to a direction, indicating that a step or movement is performed laterally, either to the right or left side of the dancer's body. This term modifies various steps to specify their path across the stage, often aligning with second position or écarté lines where the body opens to the side. The term is commonly used in allegro sequences to add width and spatial dimension to choreography, such as in glissade de côté, a gliding step that travels sideways from fifth position by brushing one foot out to second before joining it to the other. It also appears in sissonne de côté, a scissor-like jump that propels the dancer laterally, enhancing dynamic patterns in group formations or solos. These applications emphasize horizontal traversal, contrasting with forward or backward progressions. Execution requires maintaining square hips and an upright torso without leaning toward the working side, ensuring balanced alignment and efficient energy transfer for sustained travels. This placement supports the precision needed in allegro work, where de côté movements facilitate quick directional shifts while preserving classical lines. Variants distinguish direction as de côté à droite (to the right) or de côté à gauche (to the left), adapting to choreographic symmetry. Steps may also vary as open or closed forms, such as sissonne ouverte de côté with legs extended apart in air versus sissonne fermée de côté where they close on landing, allowing flexibility in phrasing and . À la seconde briefly relates as a static side extension of the or , complementing de côté travels.

Leg Positions and Gestures

Arabesque

In ballet, the arabesque is a foundational pose characterized by the dancer balancing on a straight or demi-plié supporting leg while extending the working leg straight behind the body at an angle of 90 degrees or higher, with the inclined slightly forward to elongate the line and the arms positioned in opposition—one forward from the supporting side and the other extended backward or to the side—for equilibrium. The pose derives its name from intricate Moorish decorative motifs, evoking a fluid, ornamental curve that emphasizes grace and extension. Variations in the arabesque primarily involve arm configurations and épaulement, with the French School recognizing two principal forms, the four, and the Cecchetti system five, all prioritizing precise épaulement to enhance the profile view. The working leg may be extended at different heights: à terre (on the ground), à demi hauteur (approximately 45 degrees), or à la hauteur (90 degrees or beyond), allowing for increased dramatic expression. Classical arabesques demand rigid alignment with a fully straight working knee and neutral pelvis, whereas free-form versions in permit subtle curves or asymmetries for stylistic interpretation. Originating in the early 19th-century Romantic era, the arabesque was codified by Italian choreographer Carlo Blasis in his 1820 treatise The Code of Terpsichore, where it symbolized ethereal longing and otherworldly poise amid the period's emphasis on emotion and fantasy. It features prominently in adagio exercises to develop strength and control, in solo variations to highlight virtuosity, and in partnering sequences such as the penche arabesque, where the dancer tilts further forward supported by a partner. A quintessential example appears in , where the Swan Queen's arabesques convey vulnerability and avian elegance during her lakeside scenes. Proper execution relies on core engagement to stabilize the and prevent hip hiking, ensuring the supporting remains extended without hyperextension while the directs over the front arm to sustain balance and line. This activation of the deep abdominal and back muscles allows the joint to initiate the working leg's lift, promoting a seamless, elongated essential for the pose's aesthetic impact.

Attitude

In ballet, the attitude is a classical pose in which the dancer balances on one supporting leg, either straight or in demi-plié, while the working leg is raised and bent at a 90-degree angle at the knee, with the foot positioned near or slightly above the knee of the supporting leg, and the entire leg turned out from the hip. This position creates a curved line inspired by , distinguishing it from the arabesque, where the raised leg remains straight to emphasize a linear extension. The attitude can be executed devant (to the front), à la seconde (to the side), or derrière (to the back), with the body typically held in profile to highlight the gesture's elegance and . Execution requires the working hip to remain open and level, with the lifted as high as possible without twisting the torso, ensuring the raised foot aligns parallel to the supporting for optimal and stability. The arms often frame the pose in a rounded or complementary position, such as one arm extended forward and the other curved overhead, to enhance the overall line and balance. From a preparatory retiré position, the working leg unfolds into attitude while maintaining épaulement, or shoulder positioning, to convey poise and control. The attitude is commonly used in turns (such as attitude pirouettes), jumps (like attitude sautée), and static poses to add dynamic expression and sculptural quality to . It plays a key role in George Balanchine's Apollo (1928), where the muses present their arts to Apollo through attitude gestures, underscoring themes of classical harmony and divine inspiration. Historically, the attitude was formalized by Italian ballet master Carlo Blasis in the early , drawing direct inspiration from Giambologna's 1580 bronze statue of the mythological god Mercury, which depicts the figure in a poised, winged stance with one leg bent and raised behind. Blasis codified the position in his 1820 treatise The Code of , adapting the statue's for ballet's emphasis on and elevation. Variations exist across major ballet schools: in the , the attitude often features a more fluid, expansive upper body with rounded arms for dramatic flow; the prioritizes precise, sharp angles and balanced in the legs; while the Royal Academy of Dance (RAD) emphasizes clean lines with slightly lower knee lifts for accessibility in training.

Retiré

In , retiré (French for "withdrawn") is a fundamental position in which the working foot is lifted and placed against the side of the supporting , with the pointed and the raised to position en l'air while the remains bent. This creates a compact, triangular shape that emphasizes and alignment, distinguishing it as a static pose for balance or transition. The position can be executed devant (to the front), de côté (to the side), or derrière (to the back), serving primarily as a preparation for dynamic movements such as turns, jumps, or further extensions. During execution, the of the working must be turned out from the hip joint to maintain proper external , while the hips remain level to prevent tilting and ensure stability, often while balancing on demi-pointe on the supporting . This alignment is crucial for avoiding strain on the lower back and hips, promoting efficient weight distribution. Retiré is commonly employed in pirouettes, where it provides a compact base for rotation on the supporting leg, and in preparations for jumps like the grand jeté, allowing for quick transitions into extension. Unlike the lower cou-de-pied position, where the foot wraps around the ankle of the supporting leg, retiré elevates the working foot higher to the knee for greater leverage in these actions.

Cou-de-Pied

Cou-de-pied is a foundational position in where the working foot is placed against the ankle of the supporting leg, with the toes touching the ankle bone and maintaining a pointed foot for precise articulation. This placement creates a wrapped effect around the "neck of the foot," ensuring the instep hugs the supporting leg tightly without any gaps, which promotes stability and clean lines during dynamic movements. The position varies as cou-de-pied devant, with the heel of the working foot forward and the toes wrapping behind the ankle bone, or cou-de-pied derrière, with the heel backward and the toes positioned in front for a crossed effect. Execution demands close contact between the feet to avoid separation, emphasizing pointed toes and controlled to facilitate smooth transitions in beats and jumps. Cou-de-pied is commonly employed in petite battements, where the working foot rapidly beats against the supporting ankle in a fluttering motion, and in entrechats, vertical jumps where the feet cross and beat at this level mid-air for intricate footwork. It also supports turns executed sur le cou-de-pied, allowing the dancer to rotate on the supporting leg while the working foot remains anchored at the ankle. In the French school, as practiced at institutions like the Paris Opéra Ballet, cou-de-pied receives particular emphasis for enhancing precision in batterie, prioritizing speed, softness, and articulate foot placement over rigid turnout to achieve fluid, elegant beats. This grounded wrap contrasts with the elevated retiré position at the knee, serving as a lower preparatory for quick actions.

Sur le Cou-de-Pied

Sur le cou-de-pied is an advanced ballet foot position performed on demi-pointe or full pointe, where the working foot wraps around the ankle of the supporting , placing the toes on the "neck" of the foot—the tapered area just above the or below the ankle . This relevé variation demands precise articulation, with the working foot's instep arched and toes pointed to encircle the supporting ankle securely, distinguishing it as a dynamic pose for elevated balance. In the , the toes typically point upward against the ankle, while the positions them downward along the ankle , both emphasizing and alignment to prevent sickling. The position is integral to complex footwork, particularly in turns like piqué or fouetté, where it facilitates rapid weight shifts and rotational momentum; in beats such as petit battement or entrechat, it adds sharpness and intricacy by allowing quick foot crossings mid-air. Small jumps, including sautés and assemblés, incorporate sur le cou-de-pied for controlled elevation and landing precision, enhancing the overall speed and fluidity of allegro sequences. It frequently appears in coda variations of grand , such as those in or , to showcase technical virtuosity. Execution requires maintaining equilibrium on the supporting leg through engaged core and plié absorption, with seamless transitions into and out of the wrap to avoid visible strain; the dancer must keep hips level and the working foot's forward for aesthetic elongation. Common challenges include building ankle strength to sustain the position without wobbling, often addressed through preparatory drills on demi-pointe. This technique is foundational for professional pointe work, as it strengthens the intrinsic foot muscles and refines the essential for sustained balances and dynamic phrasing on pointe shoes.

Extensions and Developpés

Développé

In , the développé is a controlled unfolding movement where the working leg begins in a bent position, typically from cou-de-pied or a bend such as retiré, and is slowly extended to a straight position at the desired height. The execution emphasizes precision, with the leading the upward and outward path while the foot remains pointed throughout the extension to preserve and alignment from the . This can be directed devant (to the front), à la seconde (to the side), or derrière (to the back), and the dancer simultaneously rises to relevé on the supporting leg for balance and elongation. The descent mirrors the ascent in slowness and control, preventing any collapse or loss of line. As a foundational exercise, the développé forms the core of adagio work, performed at a deliberate to develop strength in the hip flexors and hamstrings, enhance flexibility, and cultivate the fluid, extended line essential to aesthetics. It builds the muscular endurance needed for sustained balances and transitions into poses like attitude, serving as a bent precursor that unfolds into full extension. Variations distinguish the développé à terre, where the extends along the floor from a bent starting position, from en l'air, in which it lifts into the air to 90 degrees or higher, with advanced practitioners ideally achieving a 180-degree extension relative to the for maximum height and openness. These forms reinforce overall coordination and are practiced daily to refine the movement's smoothness and stability.

Allongé

Allongé, a French term meaning "stretched" or "elongated," refers to a fully extended position in where the leg and body achieve maximum length without breaks in tension or alignment. This quality emphasizes a continuous, unbroken line that conveys grace and spatial command. Unlike hyperextended poses that strain joints, allongé maintains controlled elongation through relaxed yet engaged muscles. In practice, allongé appears prominently in arabesques, where the working leg and supporting arm extend to create an unusually long, parallel-to-the-floor line, enhancing the dancer's apparent height and poise. It also features in développés, as the leg unfolds to its full extension, often paired with an outstretched arm to unify the body's silhouette. During lifts in partnering, employs allongé to elongate her form, amplifying the illusion of and lightness for the audience. This stretched quality contrasts with the curved, rounded lines of arrondi, prioritizing straightness and expanse. Execution demands unlocked joints and fully elongated muscles to avoid rigidity, allowing the line to flow seamlessly from through limbs. Dancers initiate the stretch from the core, ensuring the knee remains soft yet straight in the extended leg, while the arms reach outward with fingers softly pointed. Training allongé focuses on slow adagio exercises, which build the sustained control and needed for precise, tension-free lines. These deliberate movements, such as sustained arabesques or développés held en l'air, gradually improve extension and body awareness over time.

Grand Écart

Grand écart, French for "great split," is a foundational position in where the dancer's legs are fully extended to form a 180-degree angle, creating a straight line from one foot to the other. It exists in two primary variations: the front-to-back split (écart facial or devant-dérrière), with one leg forward and the other backward while facing forward, and the side split (écart latéral or à la seconde), with both legs extended laterally to the sides. This position is integral to ballet training and performance, serving as a key floor stretch to enhance hip flexibility and during warm-ups and cool-downs. In adagio sequences, it forms sustained poses that emphasize line and control, while often fuses it into fluid, grounded phrases for expressive depth. Dynamically, it appears in aerial extensions during jumps, amplifying the illusion of elongation. Execution demands precise alignment to prevent strain: the hips remain square and forward-facing, the neutral without anterior tilt, and the spine elongated with shoulders relaxed over the hips for stability. In the side variation, proper from the hips opens the legs fully while maintaining this squareness. The position is held statically on the floor or elevated surface, or transitioned dynamically with controlled momentum in movement. Attaining grand écart necessitates exceptional hip flexor, adductor, and flexibility, cultivated progressively through years of daily practice starting from early training. Dancers with hypermobility may achieve it more readily but face heightened injury risks, including labral tears and joint instability if progressed too aggressively without strengthening support muscles. Gradual development mitigates these hazards, ensuring safe integration into technique.

Arrondi

Arrondi, from the French word meaning "rounded," describes a d or rounded executed by the leg or arm in , emphasizing a smooth, arc-like path rather than a linear one. This quality is fundamental in various movements where the dancer's limb traces a gentle , such as in battement arrondi, to create fluidity and elegance in the overall line. In practice, arrondi is commonly applied in battements arrondis, where the working foot sweeps through a semi-circular motion at approximately 45 degrees, and in attitudes or extensions to soften angular lines with organic curves. It dynamically enhances rond de jambe by accentuating the circular sweep of the leg. Execution involves the leading the foot along a continuous arc, maintaining and control to avoid abrupt angles, which contrasts the elongated straightness of allongé positions like arabesque. Stylistically, arrondi contributes to the ethereal and flowing aesthetic prized in the Romantic era of ballet (circa 1830–1850), where rounded movements evoked supernatural grace and emotional depth, as seen in works like . This preference for curved forms over rigid extensions allowed dancers to convey lightness and fluidity, aligning with the era's emphasis on expressive, otherworldly narratives./02:Ballet_History-_Push_and_Pull/2.05:The_Romantic_Ballet(1800s))

Battements and Beats

Battement

Battement, derived from the French word meaning "beating," is a foundational ballet movement characterized by the brushing or beating action of the working leg, either extended or bent, from the floor or in the air. This action involves extending the leg to the front, side, or back, often repeatedly, to emphasize control and articulation. Battements form a core part of technique, serving as essential exercises in daily training routines. Battements are broadly divided into two categories: grands battements, which involve large, sweeping extensions of the leg, and petits battements, which feature smaller, more controlled movements. Among the petits battements, key variations include battement tendu (a slow, stretched brushing along the ), battement dégagé (a light disengagement and lift off the ground), battement frappé (a sharp, striking motion from the foot), and petit battement (a rapid, small shaking or beating, typically at the ankle). These movements can be performed sur la terre (on the ground, with the foot brushing the ) or en l'air (in the air, with the leg lifted). The primary purpose of battement exercises is to warm and activate the leg muscles, particularly in the hips, thighs, and calves, while enhancing precision in footwork and developing speed and coordination for more complex steps. They build foundational strength and flexibility, aiding in the execution of jumps, extensions, and turns. Historically, battements have been integral to since the , originating in the codified techniques of early masters and evolving with variations in leg height across schools such as the French, Russian, and Italian traditions. These exercises are primarily practiced at the barre during the warm-up phase of class to establish alignment and muscle engagement.

Battement Tendu

Battement tendu, French for "stretched beating," is a fundamental ballet exercise in which the working foot slides along the from a , such as first or fifth, to an extended position while maintaining continuous contact with the ground. The leg fully stretches with the knee remaining straight, culminating in a pointed foot (pointe) where the toes press firmly into the and the is forward, emphasizing from the . This movement then reverses, sliding the foot back to the starting position without any interruption in contact. Execution begins in a at the barre, with the dancer initiating the slide by pressing the ball of the working foot outward while keeping the toes connected to the floor throughout. It is performed in three primary directions: devant (to the front, aligning with the supporting leg's alignment), à la seconde (to the side, opening to second position), and derrière (to the back, with the foot brushing past the supporting foot). The movement ends in open positions of the feet, such as second for à la seconde, promoting precise articulation and alignment. Unlike airborne actions, the entire exercise remains grounded, focusing on smooth, controlled sliding rather than any elevation. In ballet training, battement tendu serves as an essential warm-up exercise at the barre, typically performed en croix (in a pattern: front, side, back, side) to prepare the muscles and joints. It builds strength in the feet, ankles, and legs while enhancing , balance, and coordination, forming the basis for more complex steps. Regular practice improves and precision, essential for classical technique. Common faults in battement tendu include sickling the foot (inverting the ankle instead of pointing straight), which compromises alignment; popping or lifting the toes off the floor, disrupting the smooth slide; and bending the knee, reducing the stretch. Other errors involve curling the toes under, rolling through the foot rather than sliding evenly, or shifting weight onto the working foot, all of which hinder control and . Placing excessive tension in the hips or forcing turnout beyond natural capacity can also lead to strain. Correcting these through mindful practice ensures proper muscle engagement and prevents injury.

Battement Dégagé

Battement dégagé, meaning "disengaged battement," is a fundamental exercise in where the working foot brushes smoothly along the floor outward from a , similar to a battement tendu, but then lifts slightly off the ground at the full extension before returning quickly. This airborne phase distinguishes it from the tendu, emphasizing a light, swift disengagement that maintains a fully pointed throughout. In execution, the movement is performed at approximately twice the speed of a tendu, with the foot rising 2 to 4 inches (about 5 to 10 cm) off the floor, depending on the musical tempo and stylistic demands, before sliding back into first or fifth position without pause. It can be directed to any position—front (devant), side (à la seconde), or back (derrière)—and is typically practiced en croix (in the shape of a cross) at the barre to build precision and control in all directions. The accent falls on the outward brush and lift, promoting dynamic energy while the return remains unaccented for fluidity. This exercise serves as a key transition into more complex footwork and jumps, such as petit allegro combinations, by developing the speed and lightness essential for seamless shifts between steps. It also enhances ballon—the buoyant, elastic quality in leaps—through targeted strengthening of the toes, instep, and ankle joint, which supports greater elevation and suspension in airborne movements. Stylistic variations exist between schools, particularly in lift height: the Italian favors a higher elevation of around 4 inches for emphasis on precision and vigor, whereas the French school, often using the term battement glissé, maintains a lower lift closer to 2 inches to prioritize smoothness and subtlety.

Battement Frappé

Battement frappé, meaning "struck battement" in French (pronounced [bat-MAHN fra-PAY]), is a ballet exercise where the working foot is forcefully extended from the cou-de-pied position—a placement on the ankle of the supporting leg—to a pointed position, typically striking the floor or air with the ball of the foot. This sharp flicking action emphasizes precision and speed, distinguishing it as a dynamic preparatory movement in technique. In execution, the dancer begins in a turned-out position, often fifth position at the barre, with the working foot flexed and placed at cou-de-pied either devant (in front) or à la seconde (to the side). The movement involves a quick, controlled strike outward to about 45 degrees, brushing or hitting the floor (or air for higher variations) before returning to the starting position, all while maintaining alignment and engagement of the core and supporting leg. This small, rapid action is repeated in counts of eight, promoting quick articulation of the foot and ankle. The exercise builds ankle strength and flexibility through repeated pointed extensions and strikes, enhancing the dancer's ability to control foot placement with force and finesse. It is commonly used to prepare for more complex beats (batterie) and turns, as the sharp initiation develops the explosive power needed in allegro sections of . A frequent fault is applying excessive force, which can cause tension in the leg and disrupt smooth transitions, rather than focusing on crisp, economical energy. Variations include the petit frappé, executed low with the foot striking the floor directly for grounded precision, and the grand frappé, taken higher into the air without floor contact to emphasize and speed. Additional forms, such as double frappé, involve two rapid strikes before extension, further challenging coordination.

Rond de Jambe

Rond de jambe, meaning "round of the leg" in French, is a fundamental exercise involving a circular movement of the working leg around the supporting leg, with the foot tracing a smooth half or full circle either on the floor or in the air. This movement emphasizes precision and fluidity, maintaining square hips and straight legs while keeping the working foot fully pointed throughout. It can be performed or counterclockwise, creating a rounded path similar to arrondi. Execution begins from a tendu position, where the working foot slides along the floor or lifts to form a smooth arc without any jerking or deviation. In rond de jambe à terre, the foot remains in constant contact with the floor, drawing the circle directly on the ground for controlled practice. For rond de jambe en l'air, the working leg lifts to 45 or 90 degrees and circles while the knee may briefly pass through cou-de-pied at the lowest point, ensuring the leg's bottom half maintains the circular trajectory. Directions include en dedans, moving the leg counter-clockwise from back to front, and en dehors, moving from front to back, each promoting balanced development of the . Typically practiced at the barre to enhance flexibility and in the center to build control and coordination, rond de jambe serves as a preparatory exercise in adage sequences. It benefits dancers by improving mobility and stability, allowing greater in the leg without excessive joint stress, as skilled performers exhibit controlled movement to facilitate this. Proper execution also helps maintain smooth articulation, reducing the risk of hip hitching or snapping during circular motions.

Simple Steps and Transitions

Glissade

A glissade is a fundamental traveling step in , characterized by a smooth motion that connects other movements. It begins and ends with a demi-plié, starting from fifth position where the feet are crossed and heels touching. The dancer bends the knees in the initial demi-plié, then glides the working foot along the floor in the specified direction while the supporting foot slides to meet it, closing back into fifth position upon landing. This execution emphasizes fluidity and lightness, with the body remaining upright and the glide creating an illusion of effortless progression across the floor. The step can be performed in multiple directions to suit choreographic needs, including devant (forward, with the working foot leading front), derrière (backward, leading back), de côté (to the side), en avant (traveling forward), and en arrière (traveling backward), along with dessus (over) and dessous (under) variations that determine foot positioning relative to the supporting . During execution, the knees bend and then straighten progressively through the glide, culminating in a soft landing on the demi-plié to absorb impact and prepare for the next action. Arms typically open in coordination with the movement, often in a low second position, to enhance balance and line. As a transitional element, the glissade promotes seamless flow in , frequently preceding jumps like the assemblé or jeté to build momentum and position the dancer correctly for takeoff. Its quality helps maintain rhythmic continuity, allowing the performer to cover ground without interruption while upholding ballet's aesthetic of grace and precision. A notable variant is the glissade précipitée, a rapid version executed with heightened speed and energy, often in response to quick musical tempos, to inject urgency while preserving the step's core mechanics.

Chassé

The is a foundational traveling step in , derived from the French term meaning "chased," where the back foot slides forward along the floor to meet the front foot before both feet push off together to advance the dancer. This gliding motion creates a seamless progression, distinguishing it as a direct chase rather than a pattern like the . In execution, the dancer begins in fifth position with a slight plié, sliding the back foot low to the ground toward the front foot to close in fifth position, followed by an even push from both legs to propel forward or sideways while maintaining a low center of gravity. The step can be performed in various directions, including devant (forward), derrière (backward), or de côté (to the side), often in croisé, effacé, or écarté facings, and repeated in series to build momentum and speed across the studio floor. Proper technique emphasizes keeping the heels connected to the floor and preserving turnout throughout to ensure fluidity and balance. The serves as a versatile connecting step in , commonly featured in rhythms for its rhythmic glide, across-the-floor progressions to develop coordination, and character dances such as those in for expressive travel. A frequent fault in its performance is an uneven push from the supporting leg, which disrupts balance and can cause stumbling, underscoring the need for symmetrical force application.

Pas de Bourrée

The pas de bourrée is a small, quick linking step in , executed on pointe or demi-pointe through three consecutive steps that alternate the feet while passing close together, often creating a subtle pattern. It typically begins and ends in fifth position or with one foot in cou-de-pied, allowing for sideways progression en face (facing front) or tournant (turning). Variations include the couru (running) form, a rapid progression by small, even steps in any direction or a circle, and the lent (slow) form, performed with more deliberate fondu (bending) in the supporting leg for emphasis. The step may be directed devant (forward), derrière (backward), dessus (over the supporting leg), or dessous (under the supporting leg), adapting to choreographic needs. Originating from the bourrée, a 17th-century French social and court dance characterized by quick, light steps on the toes, the pas de bourrée was adapted into ballet as a transitional movement. In performance, it serves to connect larger steps in variations, fill musical phrasing, and provide fluid transitions, with its rapid execution on pointe enhancing an illusion of speed and ethereal movement.

Balancé

Balancé is a fundamental step characterized by a swaying, waltz-like motion where the dancer alternates balance between the feet, shifting weight from one leg to the other. In this step, one leg extends while the body sways over it, creating a rocking quality that emphasizes fluidity and control. The movement typically follows a three-count rhythm—down, up, down—resembling a pas de valse and evoking a gentle, lyrical undulation. Execution begins in fifth position with a demi-plié on the supporting leg, followed by gliding the working foot forward (en avant), extending it to 90 degrees or higher as the body sways over the extended leg; the supporting foot then closes behind in fifth position. The sequence reverses, with the weight shifting to the newly extended leg. Balancé may also be performed en arrière (backward) or de côté (to the side), opening the working foot laterally while the body sways in opposition to maintain equilibrium; the arms typically move in opposition to the sway, aiding balance through coordinated port de bras. This step finds frequent use in adagio and lyrical sections of classes and , where it builds strength, coordination, and expressive phrasing through its inherent rocking motion. Variations include the simple balancé, executed without rotation for direct progression, and balancé en tournant, where the dancer incorporates a turn either toward or away from the extended leg during the sway.

Tombé

Tombé, from the French word meaning "fallen," is a step that involves a deliberate and controlled descent of the body onto the supporting leg. In technique, it is executed by inclining the forward or to the side while extending the working leg, resulting in a fall onto the supporting leg in demi-plié, with both knees bending to absorb the motion while the body maintains its facing direction. This step emphasizes precision and strength in the legs and core to ensure the descent remains fluid and balanced, preventing any abrupt collapse. The tombé can be performed devant (to the front) or de côté (to the side), typically starting from fifth position with a preparatory plié that initiates the extension and fall into fourth or second position, respectively. Recovery follows immediately, often through a rise or transition to another step, such as a pas de bourrée, allowing the dancer to regain upright posture without loss of momentum. According to Gail Grant's Technical Manual and Dictionary of , the tombé is specifically "a movement in which the dancer falls forward or sideways onto the supporting leg in demi-plié, at the same time bending both knees," highlighting its role in dynamic weight transfer. In , the tombé serves as a transitional element that prepares for extensions, turns, or jumps by shifting the dancer's weight and building for subsequent movements. Its inherent falling quality introduces dramatic tension and fluidity, enhancing expressive phrasing in performances while facilitating smooth progression across the stage.

Turns

Pirouette

A pirouette is a fundamental turn performed on a single supporting leg, involving one or more complete rotations of the body while maintaining balance and alignment. The movement originates from a preparatory plié, typically in fourth or fifth position, where the dancer generates upward to rise onto demi-pointe or pointe, drawing the working leg into a high retiré position with the foot placed against the inner ankle or knee of the supporting leg and the knee turned out. Spotting is essential, involving the rapid whipping of the head to fix on a specific point in the space ahead, allowing the body to follow while minimizing disorientation and preserving verticality. Execution emphasizes precise control and . The dancer pushes evenly from the plié using both feet, keeping the hips square and the supporting grounded initially before rising, with arms held in a strong, rounded slightly forward to facilitate the turn. To achieve multiple rotations—such as doubles or triples—the arms and torso are drawn inward, reducing the and accelerating the spin through conservation of , a physical where angular momentum remains constant unless external torques act. Pirouettes are classified as en dehors, turning outward from the supporting leg toward the working leg, or en dedans, turning inward away from the working leg, each requiring adjusted arm and gaze directions for stability. In usage, pirouettes form a core element of center floor combinations and solo variations, demonstrating technical prowess and artistic expression in classical and contemporary ballets. They highlight the dancer's ability to sustain épaulement and line while navigating quick directional changes. The physics of momentum conservation not only enables multiple turns but also underscores the need for efficient energy transfer from preparation to finish, where the dancer arrives precisely on balance. Training for pirouettes builds progressively from barre exercises to work, starting with fouetté to develop strength in the supporting leg and coordination in the working leg. Students practice quarter and half turns before advancing to full singles, incorporating plié preparations and spotting drills to ensure clean rises and finishes. In the Cuban method, for instance, emphasis is placed on consecutive in retiré, gradually adding beats and extensions to transition toward multiple turns, fostering the power needed for sustained rotations.

Chaînés

Chaînés, an abbreviation for tours chaînés déboulés, consist of a series of quick, linked half-turns performed on pointe or demi-pointe, with the dancer progressing forward in a straight line or diagonally across the stage. The feet alternate rapidly in a closed fifth position or a narrow , shifting weight from one foot to the other while maintaining a continuous flow that resembles a chain. This step emphasizes precision and momentum, distinguishing it as a traveling turn rather than a stationary one. In execution, the dancer begins in fifth position on pointe, with arms held in a rounded forward at waist level to aid balance and propulsion. Each half-turn involves a relevé push from the supporting leg, followed by a quick pivot and closure of the working foot behind, typically performed en avant (forward) or de côté (to the side) while spotting a fixed point ahead to prevent dizziness and ensure smooth progression. En pointe execution is essential for achieving the required speed and lightness in professional settings. Chaînés are commonly used in across-the-floor exercises to develop coordination, stamina, and directional control, often serving as dynamic entrances or transitions in . They build endurance by demanding sustained relevé and rapid weight shifts over multiple repetitions, making them a foundational step for advancing technique in both class and performance. The term originates from the French word chaîné, the past of chaîner meaning "to chain" or "link," reflecting the connected nature of the turns, with roots in classical ballet's French terminology developed in the .

Piqué

Piqué, from the French word meaning "pricked" or "pricking," is a step executed by stepping directly onto the pointe (tip of the toes) or demi-pointe (ball of the foot) of the working foot with a straight leg, while the other leg is lifted to a retiré position at the supporting knee (passé), typically in front for en dehors turns or behind for en dedans. This movement emphasizes precision and a sharp, energized quality, often incorporating a relevé to rise onto pointe. The step can be performed in different positions relative to the supporting leg, including devant (in front), à la seconde (to the side), or derrière (behind), allowing for directional variety in . When used in turns, known as piqué turns, the dancer travels across the stage by successively stepping onto pointe and rotating, with the raised leg providing balance and impetus. Piqué is frequently employed in allegro sections, which focus on quick, lively movements, as well as in solos to highlight technical sharpness and dynamic accents. Its crisp execution adds vitality and progression to phrases, distinguishing it through the direct "pricking" action of the foot against the floor. Variants include the simple piqué, where the supporting leg remains straight and the raised leg is in basic retiré, and more complex forms such as piqué with attitude, in which the lifted leg bends into an attitude position for added elegance and challenge. Examples like piqué en arabesque or piqué développé further adapt the step to showcase extended lines or developed positions.

Fouetté

A fouetté (French for "whipped") is a dynamic turn in executed on one supporting leg while the working leg whips forcefully from front to back, generating momentum for multiple rotations. The dancer typically begins in fourth position with a preparatory développé of the working leg to a high extension at 90 degrees or more to the front, then rapidly circles it outward and behind to a passé or attitude position as the body rotates en dehors (outward). This whipping action, combined with a subtle plié and relevé on the supporting leg for each turn, allows for sustained sequences that demand precise coordination to maintain balance and speed. In execution, fouettés alternate subtle pliés on the supporting leg to initiate each , with the arms playing a crucial role in assisting the turn through controlled opposition—often opening to second position and then closing to first for counterbalance and impetus. The dominant direction is en dehors, though variations like en dedans (inward) exist; the technique relies on the dancer's core strength to keep the hips level and the supporting foot fully pointed on demi-pointe. Proper timing ensures the leg's aligns with the body's spotting to avoid wobbling, making it a staple for advanced training. Fouettés are most famously used in virtuosic codas, such as the 32 consecutive turns in the Black Swan pas de deux from Marius Petipa's 1895 staging of Swan Lake, where they showcase the ballerina's technical prowess and endurance. This sequence requires exceptional leg strength, ankle stability, and rhythmic precision to complete without faltering, often serving as a dramatic climax in grand pas de deux. Historically, the fouetté turn gained prominence in the late 19th century through Italian ballerina , who first performed 32 on pointe in a production of and repeated the feat for her debut as in , elevating it to a benchmark of classical virtuosity. In modern practice, dancers have pushed boundaries further, with records exceeding 100 consecutive fouettés; for instance, American ballerina noted in her autobiography that she could execute 114 at age 14 during training with the .

Soutenu en Tournant

Soutenu en tournant, meaning "sustained while turning," is a step involving a turn executed on demi-pointe from an open position such as écarté or fourth position, with the feet closing into fifth position upon completion. The dancer begins in a preparatory pose, rises onto the balls of both feet into a sous-sus (a narrow fifth position with heels together), and rotates the body while maintaining balance and alignment. In execution, the arms are typically drawn into to facilitate the turn's momentum, and the dancer employs spotting—focusing the eyes on a fixed point and whipping the head around last—to preserve orientation and prevent ; the step may be performed as a single rotation or in a series of up to eight consecutive turns. Proper technique emphasizes a smooth rise, engaged core, and even distribution of weight across both feet to ensure stability. This turn is commonly used in adagio sections to create elegant transitions between poses or movements, allowing for a controlled and lyrical flow that highlights the dancer's poise and precision. Unlike the rapid, leg-driven fouetté, soutenu en tournant prioritizes sustained control and fluidity over speed. In contrast to the pirouette, which maintains a retiré position on one supporting leg, soutenu en tournant involves both feet and a dynamic opening and closing of the legs.

Jumps and Sauts

Sauté

In , a sauté is a fundamental jump executed from two feet to two feet, where the dancer propels the body into the air by pushing off simultaneously with both feet from a preparatory plié and lands softly on both feet, emphasizing control and lightness. This movement, derived from the French word meaning "jumped," highlights the quality of ballon, the illusion of suspension and buoyancy in the air achieved through precise extension of the legs and pointed toes. The landing is absorbed through a controlled return to plié, protecting the knees and maintaining alignment. Sautés, often performed as petit allegro, involve smaller, quicker elevations often performed in sequences to build endurance. They may also incorporate beats—rapid closing and opening of the legs in mid-air—or remain simple without, depending on the choreographic context. The primary purpose of sautés in training is to develop explosive power in the legs, enhance coordination between the upper and lower body, and foster rhythmic precision, making them essential for progressing to advanced allegro work. At the barre, petits sautés serve as preparatory exercises to warm up the muscles, improve stamina, and reinforce proper mechanics before transitioning to center floor. From a physics perspective, the sauté relies on efficient energy transfer during push-off, where the demi-plié stores in the bent knees and ankles, converting it to through explosive extension of the and calves. In the air, the dancer maintains by rotating the hips outward via the deep external rotators, creating an elongated silhouette and maximizing hang time. Upon landing, shock absorption occurs as the plié dissipates impact forces, distributing them across the joints to minimize stress.

Jeté

Jeté, derived from the French word meaning "thrown," is a foundational ballet jump that involves transferring the dancer's weight from one foot to the other by propelling the working leg into the air and landing on it. This movement emphasizes projection and coordination, distinguishing it as a key element in petit allegro, where the leg is brushed outward to initiate the leap without achieving a full split. The execution of a jeté typically starts in fifth position with a deep plié for preparation, followed by a swift brush of the working leg off the floor in a manner akin to a battement jeté, while the supporting leg extends and pushes to elevate and propel the body forward or sideways. It is performed in variations such as devant (to the front), à la seconde (to the side), or derrière (to the back), with the dancer landing softly on the extended working leg in demi-plié and the free leg closing to cou-de-pied position behind for stability. Proper technique requires maintaining turnout, épaulement, and a forward gaze to ensure smooth progression. In , jeté serves as a versatile step in simple allegro combinations and across-the-floor progressions, fostering strength, timing, and directional travel while building foundational skills that lead toward advanced leaps. Common faults in jeté execution include low leg extension from inadequate brushing force, which diminishes height and projection, and hard landings due to insufficient pliés or poor weight distribution, potentially increasing injury risk during repeated practice.

Grand Jeté

The grand jeté, translating to "big throw" from French, is a foundational grand allegro leap in characterized by the dancer propelling themselves into the air from one foot to the other, with the legs forming a complete front-to-back split while airborne. The working leg brushes forward along the floor before extending fully, while the supporting leg pushes off strongly to achieve maximum height and distance, resulting in a momentary suspension that highlights the dancer's extension and control. occurs on the forward leg in demi-plié, with the body maintaining an upright posture to absorb the impact gracefully. Execution of the grand jeté emphasizes precise preparation and dynamic force, often beginning from a battement fondu on the supporting leg, where the knee bends softly as the working leg initiates a forward brush to build momentum. Common variations include the grand jeté en tournant, which incorporates a full turn in the air for added complexity and directional change, and the bras en avant position, where the arms extend forward parallel to the floor to counterbalance the leap and enhance propulsion toward greater height. The aerial split achieved in this movement represents the airborne form of the grand écart, demanding exceptional flexibility and strength in the hips and legs. In performance, the grand jeté serves as a virtuosic element in solo variations and , showcasing the dancer's power and elegance across classical repertoires. It holds particular prominence in the Russian Vaganova school, where training prioritizes seamless, effortless execution to convey lyrical precision and dramatic flight, making it a hallmark of advanced technique in ballets like and The Sleeping Beauty.

Assemblé

Assemblé, from the French word meaning "assembled" or "joined together," is a fundamental ballet jump in which one leg is extended into the air while the other leg joins it to form a fifth position above the ground before landing together in fifth position on the floor. This step emphasizes coordination and precision, with both feet joining precisely in fifth position in the air. The execution begins in fifth position with a preparatory demi-plié, where the working foot slides smoothly along the ground—similar to the initial motion of a glissade—before being brushed vigorously into the air to a full extension, with the toes pointed. As the jump reaches its apex, the supporting leg joins the working leg in the air to assemble in fifth position, and the dancer lands softly in demi-plié on both feet, maintaining turnout and alignment. The movement requires balanced impulsion from the plié to achieve height and control the descent. Assemblés are performed in various directions: devant (to the front), derrière (to the back), dessus (over the supporting leg), and dessous (under the supporting leg). They are categorized as petit assemblé, executed with a lower battement for moderate , or grand assemblé, involving a higher battement for greater height. A variant, assemblé battu, incorporates a quick beat of the feet together in the air during the jump. In petit allegro sequences, the assemblé facilitates smooth, connected transitions within combinations and group , differing from the jeté by uniting the feet in the air rather than separating them upon landing.

Sissonne

The sissonne is a jump executed from both feet, in which the dancer springs into the air, opening the legs to second position before closing them to fifth position on landing. This scissor-like motion defines the step, providing an elegant display of coordination and elevation in allegro sequences. Named after François César de Roucy, Comte de Sissonne (died 1686), a French dancer who invented the step in the . The movement's scissor-like opening and closing of the legs (resembling "ciseaux" in French) inspired its descriptive quality. It begins from a plié, usually in fifth position, where the dancer uses the bend in the knees to propel upward, engaging the core for control and forward momentum. In the air, the front leg reaches forward or to the side while the back leg extends oppositely, creating the split before the feet come together upon descent. Variations of the sissonne adapt its direction and landing to suit choreographic needs. The sissonne devant features the working leg extending forward, often landing in attitude or arabesque on the supporting leg; the sissonne derrière reverses this with the leg to the rear. The sissonne fermée closes to both feet in fifth position, emphasizing a soft, unified landing, while the sissonne ouverte lands on one foot, highlighting balance and extension. These forms are integral to medium and grand allegro, where they convey grace and precision without excessive force. Height distinctions further refine the sissonne's application: the petit sissonne remains lower to the ground, prioritizing quick transitions and rhythmic speed in petite allegro phrases, whereas the grand sissonne achieves greater elevation to showcase long lines and dramatic flair in larger combinations. Proper execution demands coordinated use of the plié for takeoff and a relaxed yet controlled descent to maintain the step's inherent .

Complex Jumps and Batteries

Entrechat

An entrechat is a step of beating in in which the dancer jumps straight upward from fifth position, rapidly crossing the legs multiple times by beating one calf against the other while in the air, thereby changing the foot positions before landing. The term derives from the French adaptation of the Italian intrecciata, meaning "intertwined" or "entangled," reflecting the interwoven action of the legs. Execution begins with a preparatory demi-plié in fifth position, propelling the body upward with a strong push from the feet; the legs then open to second position in the air before the beating (battu) occurs, with the calves striking sharply and precisely to alternate the feet front to back or vice versa. Even-numbered entrechats, such as entrechat quatre (four beats) or entrechat six (six beats), end with the feet closing in the same position as the start, landing on both feet in fifth; odd-numbered ones, like entrechat cinq (five beats) or entrechat trois (three beats), switch the foot order and land on one foot, often preparing for the next step. This beating technique is part of the broader batterie category, emphasizing quick, clean alternations without visible effort. Entrechats are commonly featured in male variations and codas of classical s, such as the rapid entrechat six in Albrecht's Act II solo from , where they demonstrate virtuosity and power. The step's difficulty escalates with the number of beats, reaching up to entrechat dix (ten beats), which demands exceptional timing, strength, and coordination to maintain height and clarity in the air.

Cabriole

In , a cabriole is a scissor-like jump in which one leg is thrown upward and the other leg beats against it from behind, mimicking the motion of a leaping. This movement originates from the French word for "," reflecting its lively, acrobatic quality. The beating action, known as battu, creates a sharp, precise snap as the legs briefly close together in mid-air before separating again. Execution of the cabriole begins with a preparatory plié, followed by the working (typically the lower one) extending sharply upward while the supporting pushes off the to initiate the jump. It can be performed in various directions: devant (to the front), derrière (to the back), or de côté (to the side), with the dancer landing softly on the beating to maintain balance and flow. The height and speed of the jump depend on the dancer's strength and control, emphasizing and pointed toes for aesthetic precision. Cabrioles are prized for their virtuosic display in allegro sequences, often incorporated into batterie combinations to showcase agility and power. Their dynamic style draws from Spanish influences, adding flair to classical variations in ballets like . Variants include the petit cabriole, a lower, more contained jump suitable for quick transitions, and the grand cabriole, which achieves a higher split for dramatic effect.

Brisé

In ballet, a brisé is a small jumping step characterized by a beating action in the air, where the movement appears broken or interrupted. The term derives from the French word meaning "broken" or "breaking," reflecting the sharp, segmented quality of the leg action. The execution begins from fifth position on the floor, with the dancer jumping lightly into the air; the working leg brushes forward or backward from fifth position through the air toward second position, aligning the pointed foot at the height of the supporting leg. The legs then beat together sharply, with the working leg slicing across to meet and pass the other, creating an alternating coordination that emphasizes precision and speed. Upon landing, the dancer typically finishes on one foot in fifth position, with the free leg crossed either devant (in front) or derrière (behind), and the step travels forward, sideways, or backward depending on the variation. Fundamentally, the brisé evolves from an assemblé but incorporates this aerial beat for added dynamism. Brisés are performed in several directions to suit choreographic needs: brisé devant travels with the working initiating forward; brisé derrière with the brushing backward; brisé dessus, where the back moves over to the front; and brisé dessous, where the front passes under to the back. A common variation is the brisé volé ("flying brisé"), which emphasizes greater elevation and a more pronounced slicing beat, often executed in a diagonal line. As part of petit allegro combinations, the brisé adds delicacy and intricate footwork to sequences, requiring coordinated timing between the jump and the beat to maintain lightness and flow.

Ballonné

In , ballonné is a small jump that embodies a bouncing or ball-like motion, derived from the French word meaning "bounced." The step involves extending the working leg to a low position, typically at 45 degrees in second or fourth position (devant, à la seconde, or derrière), followed by a sauté where the pointed foot seems to "ball" or rebound lightly in the air before the leg draws back to close in fifth position. There are two primary variations: ballonné simple, executed as a single, direct jump either petit (small) or grand (larger amplitude), and ballonné composé, a compound step comprising three movements—preparation, the jump with leg extension, and closure. This technique demands precise control to maintain and fluidity, with the dancer pushing off the supporting leg to create the illusion of the working foot gently touching and bouncing off an imaginary surface mid-air. Execution of ballonné emphasizes directional precision and can be performed in various orientations, such as devant (forward), de côté (to the side), or derrière (backward), often starting from fifth position on demi-pointe. The dancer extends the working leg forward or sideways while jumping, keeping it pointed and low, then quickly draws it back without fully closing until landing softly on both feet. This creates a light, elastic rebound, contributing to the overall quality of ballon—the suspended, airy lightness in jumps that enhances the ethereal appearance of the movement. Proper alignment of the hips and is crucial to avoid sinking, ensuring the step flows seamlessly into subsequent . Ballonné serves as a light allegro element, often used to add rhythmic fills or transitional buoyancy in variations, though it is less frequently employed than steps like assemblé due to its technical subtlety. In Romantic ballets such as Giselle, it imparts an otherworldly, floating quality, as seen in the Act I peasant pas de deux where sequences of ballonnés highlight the heroine's joyful, sprite-like energy. Its delicate execution underscores the Romantic era's emphasis on illusion and grace, evoking a sense of weightlessness that distinguishes virtuoso performers.

Soubresaut

The soubresaut is a small allegro jump in performed from fifth position, where the dancer springs straight upward with both legs extended and straight, landing back in the closed fifth position without any change in the feet's placement. The term derives from the French word "soubresaut," an obsolete form of "sursaut," meaning a sudden jolt or leap, evoking the quick, startling action of the movement. In this locked form of fifth position, the heels of one foot are pressed tightly against the toes of the other, maintaining a crossed configuration throughout the jump. Execution begins with a quick preparatory plié in fifth position to generate impulse, followed by a powerful relevé through the balls of the feet for a high, vertical rebound, with the legs remaining straight and together during the airborne phase. The dancer lands softly on both feet in demi-plié, absorbing the impact to preserve the straight-legged aesthetic and avoid any opening of the position. Arms typically assist by opening to or remaining in a preparatory pose to aid balance and . In , the soubresaut serves as a foundational step in allegro sequences, often preparing dancers for more complex batterie jumps by emphasizing timing and precision without leg changes. It is frequently incorporated into training exercises to develop calf strength, quick footwork, and coordination, as the repeated vertical propulsion targets the lower leg muscles while building endurance for sustained jump work.

Adagio Movements

Adagio

In ballet, adagio (also known as adage) refers to a series of slow, lyrical movements that emphasize control, balance, extensions, and fluid port de bras, often forming a dedicated section in class or a lyrical segment in performances. These movements highlight the dancer's ability to sustain positions with grace and precision, showcasing elongated lines and seamless transitions between poses such as arabesques and attitudes. A key example includes the développé, where the working leg unfolds slowly to a high extension, demanding and poise. Execution of adagio occurs at a deliberately slow musical tempo, typically following the barre portion of class and preceding faster sections, which allows dancers to focus on musical phrasing and subtle épaulement. This sustained pace builds muscular endurance and strength, particularly in the core and supporting leg, as dancers hold balances and extensions for extended periods without rushing. The emphasis on control over speed distinguishes adagio from quicker s, fostering a sense of ease despite the physical demands. In usage, adagio appears in the center work of classes to develop artistic expression and technical refinement after warm-up exercises. In full-length ballets and , it provides moments of emotional depth, allowing for intimate partnering, lifts, and narrative introspection that convey tenderness or longing. Historically, the term adagio derives from the Italian "ad agio," meaning "at ease" or "leisurely," evolving from a musical direction for slow in the to a ballet concept denoting restful, unhurried motion that contrasts with the brisk allegro. This adaptation underscores 's roots in Italian and French traditions, where adagio sections evolved to highlight nobility and poise in .

Échappé

Échappé, pronounced [ay-sha-PAY], is a fundamental movement meaning "escaping" or "slipping," involving a level opening of both feet from a , typically fifth, to an open position on demi-pointe. The step begins with the dancer in fifth position, bending the knees in a demi-plié before pushing off to open the feet evenly to second or fourth position while rising to demi-pointe, emphasizing and alignment. It can be executed as an échappé sauté, where the feet separate in the air and land together in the open position, or as an échappé relevé, where the feet slide open directly on the floor without jumping. The movement is performed to second position à la seconde or to fourth position, and may be directed devant (in front) or derrière (behind), with the body facing en face, croisé, or effacé depending on the context. In échappé to fourth position, the transition occurs without changing the front foot, maintaining the initial alignment. This execution requires precise coordination to keep the opening level and controlled, avoiding any sinking or uneven rise. In adagio work, échappé serves as a transitional step between positions, facilitating smooth shifts while developing control and fluidity in sustained movements. It also builds ankle strength and endurance by engaging the muscles through repeated rises and controlled openings on demi-pointe. Variants include échappé fermé, which closes the feet back to fifth position after the opening, often with a change of feet or sur le cou-de-pied, and échappé ouvert, which remains in the open position without closing. These distinctions allow for variations in phrasing and technical emphasis within class or performance sequences.

Fondu

Fondu, from the French word meaning "sinking down" or "melting," describes a ballet movement characterized by a slow, controlled bend of the supporting leg into a plié while the working leg extends, creating a fluid sinking quality. This action emphasizes smoothness and precision, distinguishing it from quicker bends, and is fundamental to technique as defined in standard references. In execution, particularly as battement fondu, the dancer begins on the full pointe or demi-plié of the supporting leg, then bends the knee while the working leg—starting from sur le cou-de-pied or extended—performs a battement, maintaining a straight line and controlled descent. The movement can be directed en avant (forward) or en arrière (backward), often performed en croix (in the four directional positions: front, side, back) at the barre to develop evenness. As the supporting leg straightens, the working leg lowers to sur le cou-de-pied or fifth position, ensuring the body remains aligned and the descent feels like a gentle melt rather than a collapse. Fondu builds on the basic plié by applying it unilaterally to enhance balance and leg articulation. Fondu is commonly used in adagio to introduce softness and lyrical flow, allowing dancers to sustain elongated lines with grace. It also prepares for jumps by strengthening the muscles for controlled landings on one leg, promoting safer and more placed receptions. In barre progressions, battement fondu often precedes grand battement, developing the necessary control, extension, and fluidity for larger leg swings.

Temps Lié

Temps lié, translating to "linked time" or "connected movement," refers to a series of seamless, flowing transitions between steps that emphasize continuity and grace without interruption. This technique prioritizes musicality, allowing dancers to align their phrasing with the and , particularly in slower, lyrical sections where sustained lines and subtle weight shifts create an illusion of effortless progression. In execution, temps lié begins typically from fifth position croisé, with a smooth demi-plié preparing the transfer of weight. The dancer shifts onto the working leg extended in tendu or dégagé to second or fourth position through a plié in the supporting leg, maintaining coordination and flow; the movement closes by drawing the foot back to fifth position, often alternating front and back. Performed across the floor in adagio combinations, it incorporates gentle extensions and undulations for elongated lines, with coordinated port de bras in preparatory, first, and second positions to enhance upper body flow and overall harmony. Commonly used in adagio phrasing during center practice, temps lié develops essential skills in balance, coordination, and weight placement, serving as a foundational exercise for more intricate sequences like pirouettes or sustained balances. Stylistically, it embodies naturalism in , emphasizing expressive, fluid movements to evoke organic emotion and depth.

Relevé Lent

Relevé lent, translating to "slow rise," is an adagio movement in characterized by a gradual straightening of the knees from a demi-plié to achieve full extension onto demi-pointe or pointe. Performed in one of the five basic foot positions, the dancer initiates the movement with bent knees and heels on the floor, then slowly extends the legs while maintaining alignment and lifting the heels evenly. This controlled ascent emphasizes fluidity and precision, culminating in a balanced stance on the balls of the feet or toes. Execution requires unwavering control to avoid any wobble or unsteadiness, with the knees remaining straight throughout the rise and the body maintaining a vertical line from toes to head. The movement is typically done at the barre during adagio exercises, starting from fifth position and progressing to other positions as strength develops. In the Russian Vaganova and Cecchetti schools, a subtle spring initiates the rise, while the French school favors a smooth, continuous motion without preparatory bounce. The demi-pointe serves as an intermediate stage, allowing beginners to build toward full pointe work. As a fundamental test of balance and stability in adagio training, relevé lent strengthens the muscles of the ankles, calves, and toes while enhancing overall body control. It is commonly incorporated into early syllabus levels, such as those in the , to develop the endurance needed for sustained poses and transitions. Unlike the rapid, springy relevé employed in allegro sequences for jumps, this slow variant prioritizes deliberate extension to foster precision and poise.

Allegro Movements

Allegro

In ballet, allegro denotes the energetic portion of a class or dedicated to quick, jumping movements that highlight speed, power, and lightness. Performed to music in an allegro —typically brisk and upbeat—this section follows slower exercises and culminates the technical training by demanding explosive athleticism from the dancer. Allegro encompasses a range of elevations, from low to high, executed with precise timing and elevation to convey vivacity and joy. The term originates from the Italian word allegro, meaning "lively" or "cheerful," reflecting the spirited quality of these steps. In a standard class, allegro occurs toward the end, divided into petit allegro—featuring small, rapid jumps like sautés and changements that remain relatively stationary—and grand allegro, which involves larger, traveling leaps such as sissonne and grand jeté to traverse the floor with momentum. Execution begins with simpler combinations to warm the muscles and build , gradually increasing in to challenge coordination and stamina. Some allegro variations include batterie, where the legs swiftly beat in the air for added intricacy. Allegro training is essential for developing a dancer's athletic prowess, fostering explosive power in the legs, core stability, and the ability to sustain high-energy phrasing across performances. By progressing from basic petits sauts, which emphasize quick footwork and , to expansive grands jetés that require soaring height and distance, dancers cultivate the versatility needed for classical and contemporary repertoires. This structured advancement ensures technical proficiency while minimizing risk through controlled buildup.

Bourrée

The bourrée, or pas de bourrée, is a fundamental step characterized by rapid, small running movements en avant (forward) or de côté (to the side), in which the feet remain close to the ground and barely leave the , creating an of or skimming. Often performed on pointe or demi-pointe, it involves a sequence of three consecutive steps—typically back-side-front or front-side-back—with the working foot brushing past the supporting foot in a tight fifth position, while the body stays erect and the weight shifts smoothly to facilitate forward travel. Originating from a lively French of the in the region, the term derives from "bourrer," meaning to stuff or cram, alluding to the step's compact, bustling quality as adapted from courtly dances into classical ballet technique. In execution, dancers alternate fifth positions with minimal elevation, emphasizing precision and evenness to achieve a seamless progression, often as a linking or transitional movement in allegro sections. In classical repertoire, the bourrée is prominently featured in fairy variations, such as those for the fairies in The Sleeping Beauty, where its delicate, fluttering lightness evokes ethereal, insect-like movement to portray supernatural grace. In contemporary ballet, choreographers incorporate the bourrée to introduce subtle texture and dynamic flow, blending its classical precision with modern phrasing for varied spatial effects.

Pas de Basque

The pas de basque is a classical ballet step derived from the traditional folk dances of the Basque region in southwestern and northeastern , literally translating to "Basque step." It features a curving motion of the working foot to the side, combined with a swaying plié that imparts a lyrical, waltz-like quality to the movement. This step is typically executed as a traveling allegro movement, emphasizing fluid progression across the stage with balanced body inclination. To perform the pas de basque, the dancer begins in fifth position with a plié on the rear foot, then swings the front foot outward in a demi-rond de jambe en l'air while inclining the body slightly toward the raised leg. The rear foot is then placed in fourth position front, followed by a small spring onto the front foot in demi-plié as the rear foot glides up to meet it in fifth position. It can be done en avant (forward) or en arrière (backward), with the arms held in a rounded second position that sways opposite the body's inclination to maintain equilibrium. The entire step unfolds in three counts, promoting coordination between the lower body and épaulement. Variants include the pas de basque glissé, performed close to the floor with a sliding quality for smoother transitions, and the pas de basque sauté, which incorporates a light jump for added elevation and dynamism. Both forms retain the characteristic sway but adapt to different tempos and spatial demands. In , the pas de basque serves as a lyrical element within allegro sequences, often linking phrases in classical variations or enhancing character work with its folk-inspired rhythm. It appears in ballets like , where it underscores expressive, traveling motifs. Similar to the balancé in its rocking sway, the pas de basque distinguishes itself through the circular foot path and Basque heritage.

Failli

Failli, from the French verb faillir meaning "to fail" or "give way," is a ballet term describing a brief, illusory collapse or yielding of the body during movement. In execution, the dancer typically begins in fifth position, performs a small with feet together, and lands softly in demi-plié on the supporting leg while extending the other leg forward (en avant) or to the side (de côté), momentarily deepening the plié to create the sensation of the body sinking or giving way onto the extended leg before a quick recovery to standing position. This step serves as a transitional element in allegro sequences, linking jumps by providing dynamic contrast through its fleeting loss of balance, which enhances fluidity and prepares for subsequent movements like assemblés or sissones.

Renversé

Renversé, meaning "upset" or "reversed," is a movement in which the dancer bends the body from the waist to the side above the supporting while in attitude position, inclining toward the raised working . This tilt creates a curved line, often enhanced by a coordinated port de bras where the arm opposite the raised extends forward and the other arm arches backward. The step combines an overturning action with equilibrium, disturbing the normal balance momentarily without losing poise. Execution begins typically from fourth position, with a preparatory plié followed by a développé of the working leg to attitude derrière or devant, after which the body tilts over the supporting leg in a . It may be performed en dehors, with the leg and body circling outward away from the supporting leg, or en dedans, circling inward toward it, often concluding with a recovery to fifth position or continuing into a series of turns. The attitude position involves the raised leg bent at a 90-degree angle, either behind or in front, with the knee turned out. In allegro sequences, renversé adds dramatic flair through its sweeping tilt and recovery, emphasizing speed and extension within fast-paced . It is particularly common in the Balanchine style, where it appears in class exercises and ballets to highlight dynamic body lines and .

Partnering and Group Forms

Pas de Deux

A is a in performed by two dancers, traditionally one male and one female, that emphasizes harmonious partnering, technical precision, and emotional connection between the performers. This form highlights the male dancer's supportive role through lifts, turns, and balances, while allowing the female dancer to execute intricate pointe work and extensions. The structure of a classical grand pas de deux follows a standardized sequence: an opening entrée introducing the dancers, an adagio section of slow, lyrical movements focused on sustained lifts and poses, followed by a variation for the male dancer featuring bravura jumps and turns, a variation for the female dancer showcasing speed and elevation on pointe, and a concluding coda uniting both in fast-paced, energetic footwork and partnering. This format allows for a progression from intimacy to individual display and collective climax. Originating in the Romantic era of the early 19th century, the pas de deux evolved from earlier divertissements into a more intimate and narrative-driven element, reflecting the period's emphasis on passion and ethereal beauty in ballets like La Sylphide. It was further developed and popularized in the late 19th century by choreographer Marius Petipa, who established the grand pas de deux as a virtuoso showcase in works such as Don Quixote and The Sleeping Beauty for the Imperial Russian Ballet. In traditional repertoire, the pas de deux often functions as the emotional and technical pinnacle of an act, underscoring key dramatic moments through the principals' interplay. Contemporary ballet has adapted the form to include same-sex duets, as seen in American Ballet Theatre's 2020 production of an all-male pas de deux exploring queer narratives, thereby broadening its representational scope.

Partnering

Partnering in refers to the specialized techniques employed by the lead dancer—traditionally the male dancer—to support and assist the secondary dancer, usually the female, in performing balances, turns, and lifts. This practice requires precise coordination, where the lead provides stability through strategic hand placements, body positioning, and leverage to enable the secondary dancer to achieve extended lines and dynamic movements that would be challenging or impossible solo. Early forms of partnering emphasized courtly , with the male dancer guiding the female in processional steps that symbolized chivalric ideals rather than physical exertion. Key partnering movements include promenades, where the lead guides the secondary dancer in a turning or traveling arc; fish dives, involving a forward descent supported by the partner's arms; and overhead lifts, in which the secondary dancer is elevated high above the lead's head. These maneuvers demand exceptional upper-body strength from the lead dancer to control weight shifts and momentum, alongside unwavering trust between partners to anticipate each other's actions and avoid mishaps. The physical and emotional interdependence fosters a performative intimacy that enhances the emotional narrative of the choreography. Training for partnering typically occurs in dedicated classes separate from general , focusing on progressive exercises that build strength, timing, and communication skills. Emphasis on safety has intensified since the early , incorporating spotting techniques, proper alignment to prevent spinal strain, and gradual progression from supported balances to full lifts to minimize injury risks. Instructors stress mutual feedback and repetition to develop instinctive responses, ensuring partners can adapt to variations in height, weight, or fatigue during performance. The evolution of partnering reflects ballet's broader transformation from 17th- and 18th-century court spectacles, where it was more ceremonial and less physically demanding, to the athletic prowess seen in 20th-century innovations. Pioneers like refined subtle support methods, such as curved finger grips for wrist holds, to create illusions of effortlessness, while virtuosic pairs like and in the 1960s elevated partnering to showcase bold, expressive lifts that pushed technical boundaries. This shift prioritized power and partnership equality, influencing modern training to integrate conditioning for endurance and injury prevention.

Fish Dive

The fish dive is a partnered lift in classical ballet where the female dancer is supported low to the ground by the male dancer, with her body held parallel to the floor in a horizontal position, typically grasped at the and one extended or in retiré. This position evokes the image of a diving , hence the name, and is executed as part of supported adagio work in . The male partner often kneels or bends deeply to lower the female dancer gradually or catches her in a swift descent, while she arches her upper body and extends her limbs for balance and line. In performance, the fish dive serves as a climactic moment in , emphasizing drama and technical prowess, as seen in George Balanchine's , where it concludes the piece with the ballerina diving forward into , held low and parallel to for a breathtaking effect. Balanchine frequently incorporated variations of this lift in his to highlight speed and illusion, such as in works performed by , where the descent requires seamless synchronization between partners. Execution demands precise timing and strength from the male dancer, who must support the female's weight without compromising form, often risking lower back strain if or spotting techniques falter, as identified in studies of male ballet dancers' patterns during lifts. For the female, maintaining extension and trust in the partner prevents misalignment, underscoring the lift's reliance on mutual in partnering skills to minimize potential.

Grand Pas

In classical ballet, the Grand Pas serves as a large-scale divertissement, a showcase of pure devoid of action, designed to highlight technical virtuosity and artistic hierarchy among the performers. It typically unfolds in a structured sequence beginning with an , an opening segment that introduces the principals and through coordinated group formations, followed by an adagio section featuring slow, lyrical partnering movements between the lead dancers. This is succeeded by individual variations for the principal male and female dancers, often incorporating demanding solos such as multiple pirouettes, leaps, and pointe work, before culminating in a lively coda that reunites the entire cast in rapid, synchronized sequences to build excitement and closure. Pioneered and refined by choreographer during his tenure at the Imperial Ballet in , the Grand Pas became a hallmark of 19th-century classical ballets, frequently employed as the climactic in act finales to celebrate resolutions or festivities within the storyline. A quintessential example appears in the third act of Petipa's The Sleeping Beauty (1890), where the Grand Pas forms the wedding divertissement for Princess Aurora and Prince Désiré, integrating the principals' duet with contributions from soloists and the full to evoke royal grandeur and communal joy. This format not only demonstrates the dancers' precision and stamina but also underscores the ballet's hierarchical structure, with principals at the forefront, supported by layered ensembles that create visual depth and symmetry. While the full Grand Pas emphasizes expansive ensemble participation, variants exist for smaller casts, such as the pas de trois or pas de quatre, which adapt the core structure—, adagio, variations, and coda—to three or four dancers, maintaining the focus on individual brilliance within a more intimate framework. These forms preserve Petipa's codified architecture, allowing for flexibility in galas or abbreviated productions while upholding the tradition of showcasing the company's elite performers.

Entrée de Ballet

In , an entrée de ballet refers to the opening solo or group that introduces a principal character, , or divertissement to the audience, marking their formal arrival on stage. The term derives from the French word entrée, meaning "entry" or "entrance," and it emphasizes the dramatic and choreographic moment of presentation. Historically, in the de cour* of the 16th and 17th centuries, an entrée de ballet was an autonomous scenic unit within a larger , performed by a group of costumed dancers representing a symbolic character, profession, or allegorical state. These entrées typically featured a mimed to convey the theme, followed by a collective sequence that could vary in length, and occasionally concluded with a solo or to highlight individual performers. In execution, the de ballet is often accompanied by character-specific music composed to evoke the theme, incorporating gestures to establish context before transitioning into choreographed steps. This introductory segment builds tension and sets the stage for subsequent elements, such as the dancer's technical variation. The term remains in use within acts to denote these introductory sequences, particularly in works where character establishment is key. A prominent example is the Fairy's in Act II of , where she enters to the distinctive melody, performing a lyrical solo that introduces her regal persona and welcomes Clara and to the Land of Sweets.

Roles and Personnel

Ballerina

A is the principal female dancer in a , serving as the lead performer in major productions through solos, variations, and that showcase exceptional technical , artistry, and expressive depth. This role demands mastery of complex steps, sustained pointe work, and the ability to convey narrative emotion, often embodying ethereal or dramatic characters central to the ballet's storyline. Within the hierarchical structure of professional companies, the ballerina occupies the uppermost tier as the prima ballerina, positioned above soloists who execute featured but secondary principal roles, and distinguishing her from the ensemble through prominence and creative input. Responsibilities encompass intensive daily rehearsals to refine technique and interpretation, leading performances that set the artistic standard for the troupe, and collaborating closely with choreographers and directors to adapt roles. In specific institutions like the , the equivalent title of Étoile represents the pinnacle, conferred by the director following an exemplary onstage demonstration, with duties extending to mentoring junior dancers and representing the company in international engagements. The ballerina role originated in the Romantic era of the early , evolving from earlier courtly forms into a celebrated figure of grace and individualism, epitomized by Marie Taglioni's groundbreaking 1832 debut in , where her innovative use of established the archetype of the weightless, otherworldly female lead. Today, titles and expectations vary across companies—the prima ballerina at institutions like or reflects this legacy, adapting to diverse repertoires while maintaining the core emphasis on leadership and innovation in performance.

Danseur

A danseur, or premier danseur, is the principal male dancer in a , responsible for leading performances and often portraying heroic or noble characters in classical works. These dancers typically excel in dynamic jumps and intricate partnering sequences, supporting in while showcasing their own virtuosity. In many productions, the danseur embodies the danseur noble archetype, performing princely roles that demand both physical prowess and dramatic presence. Historically, the role of the male dancer evolved from prominence in the early court ballets of the to a more subdued supporting position during the Romantic era of the , where female dancers dominated the spotlight with ethereal interpretations. This shifted dramatically in the , as figures like elevated male technique through exceptional elevation and expressiveness, paving the way for global stardom. further revolutionized the danseur's status in the , transforming the male from a mere partner into a central protagonist with charismatic, athletic interpretations that challenged traditional hierarchies and inspired a new generation of male leads. Key skills for a danseur include mastery of grand allegro—such as powerful grand jetés and assemblés—for dramatic elevation, alongside precise partnering techniques like fish dives and overhead lifts that require strength, timing, and synchronization. Titles such as premier danseur denote this elite rank, often achieved after years in the and soloist positions, emphasizing not just technical precision but also the ability to convey narrative depth through movement. In contemporary ballet, the danseur's role has expanded to prioritize emotional expression and versatility, incorporating neoclassical and modern elements that highlight individual artistry beyond classical constraints, reflecting broader cultural shifts toward gender equity in performance.

Corps de Ballet

The , translating to "body of the ballet" in French, consists of the ensemble dancers in a professional who perform as a unified group, executing synchronized patterns and formations to support the overall production. These dancers typically form large groups, ranging from small ensembles of 8 to expansive casts of up to 24 or more, depending on the ballet's requirements, as seen in the iconic flock of 18 swans in . In their role, corps de ballet members create immersive atmospheres and visual spectacle, such as the ethereal wilis in Giselle or the shades in La Bayadère, while providing essential support to principal and soloist dancers through precise, harmonious movements. This demands exceptional synchronization and stamina, as the group must maintain uniformity in timing, spacing, and expression to enhance the narrative without drawing focus from the leads. Often, these formations are led by coryphées, who guide smaller subgroups within the ensemble. Corps de ballet positions represent entry-level professional roles, usually filled by recent graduates from full-time ballet academies who join companies to hone their technique and repertory knowledge. Dancers in this rank undergo intensive daily training, including company class and rehearsals, with opportunities for rotation across various productions to build versatility before potential promotion. Historically, the expanded significantly during the Romantic era (circa 1830s–1840s), evolving from smaller court ensembles to large-scale groups in "ballets blancs" that depicted supernatural realms, adding dramatic spectacle and emotional depth to works like and . This development, pioneered at the Paris Opéra, transformed ballet into a more visually grand art form by emphasizing collective imagery over individual display.

Coryphée

In classical ballet, particularly within the hierarchy of companies like the Paris Opéra Ballet, a coryphée is defined as a leading member of the who serves as the "leader of the chorus." This rank typically involves heading small ensembles of 4 to 8 dancers, guiding them through symmetrical formations and choreographed patterns that emphasize unity and precision. Unlike the broader , which forms the foundational ensemble of synchronized performers, the coryphée provides subtle direction within these groups to maintain formation integrity. The role of the coryphée bridges the anonymous collectivity of the and the more individualized prominence of soloists, offering dancers a step up in visibility through featured positions in group sections. In performances, coryphées often take on responsibilities such as initiating movements or adjusting spacing, ensuring the ensemble's cohesion without overshadowing principal artists. This subtle prominence allows coryphées to contribute to the overall narrative or aesthetic flow of a while honing skills for potential advancement. Historically, the term "coryphée" originates from the tradition at the Opéra national de Paris, where it represents an early promotion from the entry-level rank within the . Etymologically, it derives from the French "coryphée," borrowed from Latin coryphaeus and koruphaîos, meaning "leader of the chorus" in ancient , reflecting its application to guiding performers in ensemble settings. This rank structure, formalized in the as part of the Paris Opéra's competitive promotion system established in 1860, underscores ballet's emphasis on merit-based progression from group roles. Coryphées require robust technical proficiency in classical ballet fundamentals, such as alignment, turnout, and extensions, to model execution for their group. Equally essential is their ability to demonstrate precise timing and spatial awareness, enabling them to cue entrances, synchronize phrasing, and correct alignments during rehearsals and performances. These skills foster leadership within the ensemble, preparing dancers for higher ranks through demonstrated reliability in collective dynamics.

Étoile

The étoile (French for "star") is the highest rank bestowed upon dancers in the , recognizing exceptional artistic and technical excellence as the supreme accolade within the company's hierarchy. This elite title is typically lifetime, allowing recipients to maintain their status even after retiring from active performance, though it is performance-based in its conferral and emphasizes the dancer's star quality in embodying principal roles. Unlike fixed contractual positions, the étoile designation grants flexibility, including opportunities for international guest appearances while remaining affiliated with the . Historically, the étoile title was first officially awarded in 1940, marking a formal recognition of top performers amid the evolution of the Paris Opera Ballet's structure under influential directors. Its prestige was further elevated during Rudolf Nureyev's tenure as artistic director from 1983 to 1989, when he promoted several dancers to the rank, enhancing the company's global reputation through high-profile productions and collaborations. Equivalents to the étoile exist in other major companies, such as the "principal dancer" title in or , but the French system's emphasis on individual acclaim sets it apart. Selection for étoile occurs through director nomination rather than competitive audition, often following an outstanding performance where the dancer's exceptional qualities are publicly acclaimed by audiences and peers. The process involves consultations among the artistic director, staff, and sometimes public response, culminating in an onstage announcement at the curtain call to celebrate the dancer's achievement. Étoiles bear responsibilities for leading major roles in classical and contemporary ballets, serving as ambassadors for the Paris Opera Ballet through international tours and guest engagements that showcase the company's legacy.

Performance and Style Terms

Variation

In ballet, a variation refers to a solo dance performed by a principal dancer as part of a larger choreographic structure, such as a pas de deux or grand pas, where it follows the adagio section to provide an individual showcase of technique and expression. Male variations typically emphasize allegro elements like powerful jumps, multiple turns, and dynamic beats to demonstrate strength and elevation, while female variations often highlight precision on pointe, with intricate footwork, balances, and rapid turns. This distinction allows each dancer to highlight their unique virtuosity within the classical framework. According to Gail Grant's Technical Manual and Dictionary of Classical Ballet, a variation is defined as "a solo dance in a classic ballet," underscoring its role as a concise, character-specific interlude. Structurally, a variation is brief, typically lasting 90 seconds to 2.5 minutes, and is meticulously tailored to the accompanying music, which may draw from orchestral themes or specific scores to evoke either pyrotechnic displays of speed and power or lyrical, flowing movements. The prioritizes technical brilliance—such as tours en l'air for men or attitude turns for women—while advancing the or emotional arc of the scene. These solos are integral to grand pas sections in full-length ballets, where they bridge the intimate adagio and the ensuing group coda. The term originates from the French word variation, denoting a musical alteration or theme development, adapted in the to describe these danced interpretations. A renowned example is Odile's variation in Act III of , where the ballerina executes 32 fouetté turns on pointe amid sparkling , symbolizing seduction and technical mastery; this sequence, choreographed by , remains a pinnacle of female virtuosity. Similarly, the male variation in the same features soaring grand jetés and brisés, contrasting the female's grounded precision. Such variations not only test the dancer's endurance and artistry but also culminate in the explosive coda that reunites the ensemble.

Coda

In , the coda is the concluding section of a grand or a larger dance sequence, characterized by brisk allegro movements performed by the principals and to build toward a climactic finish. This fast-paced segment follows the variation and emphasizes dynamic energy, uniting the dancers in a celebratory display of technique. Derived from the Italian word for "tail," the coda functions as the energetic endpoint of divertissements or acts in ballets such as and , providing a virtuosic resolution that highlights the performers' prowess. It often concludes with a grand musical swell, reinforcing the triumphant mood of the piece. Execution of the coda involves rapid tours en l'air, powerful jumps like grand jetés, and batterie steps such as entrechats, frequently arranged in circular patterns like manèges to create visual momentum and spatial excitement on stage. These elements demand precision and stamina, transforming the coda into a showcase of athleticism and artistry that captivates audiences.

Bravura

In , refers to a bold and spirited style of performance characterized by dazzling displays of technical skill, including speed, strength, and precision in executing complex steps. The term originates from Italian, meaning "boldness" or "bravery," and is applied to passages that emphasize virtuosic flair and elaborate movements to captivate audiences. This style highlights the dancer's agility and control, often creating an illusion of effortless daring through refined execution. Bravura is commonly featured in solo variations and codas, where dancers showcase intricate footwork and dynamic phrasing to convey dramatic intensity. Iconic examples include the sequence of 32 continuous fouetté turns in the Black Swan from , which demand exceptional balance and power, and rapid multiple pirouettes that test rotational precision and stamina. These moments prioritize showmanship, with elements like ballon contributing to the apparent that enhances the overall effect. As a key aspect of a dancer's personal artistry, serves as a momentary highlight of capability, distinguishing it from sustained mastery by focusing on isolated bursts of brilliance.

Ballon

is a fundamental aesthetic quality in that refers to the appearance of lightness, elasticity, and suspension during jumps, where the dancer seems to bound effortlessly into the air, hover momentarily, and descend slowly and softly like a balloon. This term derives from the French word for "balloon," evoking the image of a buoyant, floating motion that creates an illusion of weightlessness. To achieve ballon, dancers execute jumps from a deep plié, which provides the necessary push-off power while maintaining coordinated arm movements and a strong, supple back for control and elevation. Timing is crucial, as the ascent and descent must synchronize with the music to enhance the elastic rebound and apparent effortlessness, often visualized through the "" metaphor of inflating and gently deflating. The result is an explosive yet controlled leap with soft landings that emphasize resilience and grace. Ballon is essential in allegro sequences, where it contributes to the overall and stage presence by making dynamic movements appear lyrical and harmonious. It is typically trained through progressive exercises like petits sauts, which build the foundational lightness and precision needed for more complex jumps, such as the sauté. In the Russian school, particularly the , ballon receives special emphasis as a hallmark of , integrated with expressive upper-body phrasing to achieve a powerful yet poetic quality in performance.

Virtuoso

In ballet, a is a dancer renowned for exceptional technical proficiency and artistic expression, capable of executing complex movements with such precision and flair that they captivate audiences. The term, derived from the Italian word for "virtue" or "excellence," originally described musicians with superior skill in the 16th and 17th centuries, and by the , it extended to ballet performers emphasizing athleticism, speed, and innovation in the Italian school, which influenced through brilliant footwork and dynamic beats. Virtuoso dancers exhibit remarkable stamina to sustain high-energy solos, innovative interpretations that push technical boundaries, and profound emotional depth that elevates mere skill to artistry; elements, like rapid turns and leaps, often form a core component of their displays. Historical figures such as exemplified this through her graceful yet demanding performances, blending technical mastery with expressive storytelling in works like , while showcased acrobatic prowess and charisma in roles demanding extreme precision and power. These qualities typically distinguish principal dancers who perform variations in grand ballets, highlighting individual brilliance within ensemble contexts. The notion of the in rose prominently in the 20th century alongside the tours and the advent of film and recordings, which globalized access to these performances and amplified their cultural impact. In modern times, virtuosos extend their legacy beyond the stage through crossovers into film—such as Baryshnikov's starring roles in The Turning Point (1977) and White Nights (1985), where he integrated ballet technique with cinematic drama—and teaching, including founding institutions like the Baryshnikov Arts Center to mentor emerging talents. This evolution underscores the virtuoso's role as both performer and cultural ambassador.

Pointe and Footwork

Pointe Technique

Pointe technique refers to the specialized method in where dancers rise onto the tips of their fully extended toes within reinforced shoes, enabling a wide range of movements that emphasize elevation, balance, and precision. This technique is predominantly performed by female dancers, though male dancers occasionally incorporate it in contemporary or character roles. The origins of trace back to the late 1790s in , when early experiments with dancing on the toes emerged as part of ballet's evolution toward greater virtuosity during the Romantic era. It was first notably employed in theatrical productions around 1801 in , with dancers like Carlo Blasis documenting rudimentary forms in his 1820 treatise The Code of . The technique gained widespread popularity through Marie Taglioni's iconic performance in the 1832 ballet , where she danced en pointe throughout, establishing it as a hallmark of ethereal in . Training for typically begins between ages 11 and 12, after dancers have developed sufficient strength in their feet, ankles, and core through foundational exercises. Instruction progresses gradually over years, starting with preparatory work on demi-pointe to build , followed by supervised rises to full pointe with emphasis on proper alignment to prevent injuries such as stress fractures or tendonitis. Professional oversight is crucial, with organizations like the Royal Academy of Dance recommending at least two years of pre-pointe preparation to ensure safe progression. Key elements of pointe technique include developing strength in the shank—the reinforced inner structure of the shoe that supports the foot's arch—while mastering landings in the box, the hardened toe enclosure that distributes weight across the phalanges. Dancers must achieve stability for complex turns, such as piqué or pirouettes en pointe, and jumps like entrechats or sissones that maintain height and control solely on the toes. These skills demand exceptional muscular control, particularly in the intrinsic foot muscles and calves, to sustain positions without collapsing the arch.

En Pointe

En pointe, also known as sur les pointes, is the foundational position in where the dancer fully rises onto the tips of the toes, with the ankles completely extended and the weight supported by the reinforced box of the . This position demands precise alignment, with the foot pointed straight and the body centered over the supporting leg to achieve stability. Execution begins with a relevé, typically initiated from a demi-plié in one of the five basic positions, where the dancer pushes through the foot to rise smoothly onto full pointe while maintaining balance. The transition involves rolling through demi-pointe to full extension, keeping the knees straight and the core engaged to hold the position statically or incorporate it into dynamic movements. Proper execution requires years of foundational training in to build the necessary strength and control. This position forms the basis for all pointe work in , enabling advanced steps such as pirouettes, balances, and adagios, and necessitates pointe shoes with a stiff, boxed platform for and . Without rigid footwear, the foot cannot sustain the extreme extension and load. Common faults in en pointe include sickling, where the foot curves inward at the ankle, disrupting alignment and risking tendon strain, and rolling the ankles, which involves improper pronation or supination leading to instability and potential sprains. Correcting these requires targeted strengthening of the ankle muscles to ensure a neutral, extended foot position.

Demi-Pointe

Demi-pointe, also known as half-pointe, refers to the position in which the dancer rises onto the balls of the feet, supporting the full body weight on the metatarsals with the heels lifted off the ground, but without extending fully onto the tips of the toes. This position is achieved through a relevé, a general rising movement starting from a plié, where the dancer smoothly transitions from to this elevated stance. In execution, the ankles must remain aligned directly above the toes in a straight line to maintain proper form, distributing weight evenly across the ball of the foot to avoid sickling (inward rolling) or winging (outward rolling). The rise should be controlled and stable, with the knees straight and the body centered to ensure balance and prevent injury, emphasizing strength in the foot and ankle muscles. Demi-pointe is commonly used as a transitional position for female dancers in pointe shoes to move smoothly between flat and full pointe, as well as in turns, poses, and jumps for male dancers wearing flat shoes. It builds essential ankle and foot strength, serving as a foundational prerequisite for advancing to pointe work. In ballet classes, it is introduced early through barre exercises, such as rises in parallel and turned-out positions, to develop control and stability before progressing to work.

Piqué Turn

A piqué turn is a dynamic movement in which the dancer steps directly onto demi-pointe or full pointe with the working leg while raising the other leg into a high passé, attitude, or similar position, then rotates on the supporting point. This action creates a sharp, pricked quality, derived from the French term piqué, meaning "pricked" or "stung," referring to the precise transfer of weight onto the ball or tip of the foot. Typically executed en dehors (outward) to emphasize and extension, it can also be performed en dedans (inward) for stylistic variation, with the arms positioned to facilitate spotting—focusing the gaze ahead to maintain orientation during rotation. Multiple consecutive piqué turns are common, often chained together for fluid progression. In execution, the dancer begins with a preparatory step, such as a tendu or glissade, to generate forward momentum, then swiftly places the toes of the working foot on the floor and rises directly onto pointe without a preliminary plié on that leg, simultaneously lifting the gesture leg and initiating the turn through torso and hip rotation. The supporting leg remains straight and fully extended upon landing, with weight centered over the platform of the pointe shoe to sustain balance. Arms play a crucial role, sweeping from an open preparatory position to a rounded port de bras that aids impetus and counters any wobble. For chains of piqué turns, the dancer alternates feet, stepping onto the next pointe while spotting consistently to link rotations seamlessly. According to Maria Torija, director of the BalletMet Dance Academy, there are two primary methods for en dehors piqué turns: one emphasizing a direct rise with immediate turn initiation, and another incorporating a subtle preparatory sway for added height and control. Piqué turns are integral to pointe variations in classical ballets, such as those in or , where they enable quick, sparkling traversals across the stage, often in diagonal lines or circular patterns (manège) to showcase agility and precision. They appear in solos and sections, adding to codas or transitions within adagios. Key challenges include maintaining equilibrium on the minimal surface area of pointe, which demands exceptional ankle stability, core strength, and to counteract during rotation. Biomechanical analyses highlight the need for controlled hip external rotation and center-of-mass velocity adjustment upon stepping, as improper alignment can lead to loss of or forward pitch. Dancers often struggle with momentum generation without overstepping, requiring meticulous timing to avoid leaning or incomplete rotations in successive turns.

Relevé

Relevé is a fundamental movement derived from the French verb relever, meaning "to raise," in which the dancer straightens the knees from a demi-plié position to elevate onto demi-pointe (the balls of the feet) or full pointe, lifting the heels off the ground. This action creates an illusion of lightness and elevation, essential for maintaining proper alignment and balance in various positions. Execution of a relevé requires smooth, controlled motion, beginning with a preparatory demi-plié where the knees bend slightly while keeping the heels down, followed by a gradual or rapid extension of the legs to rise without jerking or swaying. It can be performed (slowly) for building control or quickly to initiate dynamic sequences, always emphasizing even weight distribution across the toes and a straight, engaged . The opposite action involves lowering back into plié to absorb the descent. Relevé is used extensively throughout classes, from barre exercises to work, to develop strength and precision; it forms the basis for jumps by providing the initial lift and for balances by enhancing stability on elevated feet. In performance, it supports sustained poses and transitions, such as in adagio sections or allegro combinations. The movement primarily engages the calf muscles for the powerful push upward and the ankles for articulation and stability, contributing to overall lower-body resilience and preventing common injuries like strains. Consistent practice strengthens these areas, allowing dancers to achieve higher elevations and smoother landings.

Pliés and Bends

Plié

A plié is a foundational movement in , consisting of a controlled bending of the knees while keeping the back straight and the body aligned. Performed with the legs turned out from the hips, the knees open directly over the toes, and the weight evenly distributed across both feet, it serves as an essential exercise to develop flexibility, strength, and control in the lower body. The term derives from the French word plier, meaning "to bend," emphasizing its role in softening the joints and muscles for fluid movement. In execution, a standard plié, often referred to as a demi-plié, is practiced in all five basic foot positions—both parallel (for certain contemporary styles) and turned out—beginning from a standing posture and lowering the body by bending the knees while maintaining contact with the heels on the floor. The descent and ascent must be smooth and even, with the stable and no sinking of the hips, to ensure proper alignment and prevent strain; this movement acts like a spring, compressing and releasing to build elastic power in the tendons and ligaments. is maintained throughout to support the form, directing the rotation from the hip joints rather than forcing it from the feet or knees. Pliés are integral to nearly every aspect of , providing the preparatory impulse for jumps by generating upward force and serving as a upon landing to protect the joints; they also facilitate turns by centering the body's weight and enhancing balance. As a warm-up exercise at the barre or center, repeated pliés help loosen the muscles and establish coordination before more complex steps. While a demi-plié with heels down can be executed in any position, deeper variations are limited to first and second positions to allow the heels to remain grounded without compromising turnout or alignment.

Grand Plié

A grand plié is a deep bend executed from the five basic positions of the feet, involving a full flexion until the thighs are horizontal to the floor. In the first, third, and fifth positions, the heels rise off the ground as the knees descend, allowing the body to lower while maintaining ; in the second and fourth positions, the heels remain on the floor as long as possible to achieve the deepest bend without compromising alignment. This movement builds on the demi-plié, the shallower bend of the knees. Execution requires precise control, with the back held straight, pelvis tucked under to support the spine, and weight distributed evenly through the feet to prevent rolling inward or outward. The descent and ascent must be smooth and deliberate, engaging the core and leg muscles to stabilize the body. Performed at the barre to initiate class, it serves as a foundational warm-up that loosens the hips and promotes overall body awareness. In practice, grand pliés are integral to barre and center work, typically omitting the third position, and they develop leg strength, flexibility, and coordination essential for advanced steps. indicates that while beneficial for building muscular control, the complete knee flexion in grand plié can impose significant stress on the joints, particularly the s. Dancers should avoid full grand pliés in turned-out fourth and fifth positions if turnout is limited, as this can lead to excessive strain on the knees and ankles; modifications, such as partial bends or heel-supported variations, help mitigate injury risk.

Cambré

Cambré is a fundamental position in , derived from the French word meaning "arched," where the dancer bends the upper body from the waist backward or sideways while maintaining symmetrical shoulder alignment. This gentle emphasizes elongation of the , with the shoulders opened wide and the head tilted slightly back to follow the curve of the spine, creating a graceful, flowing line that highlights the dancer's extension and poise. Execution of cambré typically begins from an upright posture, often with the arms extended overhead in fifth position or incorporated into a port de bras sequence. For cambré forward (devant) or sideways (à la seconde), the dancer initiates the bend from the upper back while engaging the abdominal muscles to support the spine; in cambré backward (derrière), the movement starts by lifting through the crown of the head to elongate the neck before arching, ensuring the hips remain aligned and the weight is distributed evenly through the feet or demi-pointe. This position can be performed standing on one or both legs, in plié or with stretched legs, always prioritizing core activation to avoid strain. In practice, cambré is integral to port de bras exercises at the barre and in the center, as well as adagio combinations that build control and fluidity. It enhances the aesthetic line in poses like arabesque by strengthening back extensors and promoting spinal mobility, often serving as a transition into or out of such extensions. Maintaining aplomb during cambré ensures balance through vertical alignment of the over the base. To prevent injury, dancers must avoid over-arching the lower back or crunching the spine, which can compromise alignment and lead to strain; instead, the arch should be distributed evenly across the thoracic region while keeping the neutral and avoiding forward hip thrust. This careful execution distinguishes cambré's backward arch from forward-leaning movements like penché, focusing on posterior extension for spinal health.

Penché

In , penché (French for "leaning" or "inclined") describes a position in which the dancer's torso inclines forward from the hips, creating a forward lean over a supporting while the working is extended, typically in arabesque or développé. This movement emphasizes elongation and balance, with the body forming a continuous line from the fingertips through the torso to the extended . Execution of penché involves initiating from a stable base, such as fifth position or an arabesque, where the dancer gradually bends forward at the hips while lifting the gesture leg higher to counterbalance the tilt, often achieving an inclination of 90 degrees or more relative to the vertical. In arabesque penché, the working leg extends backward at an acute angle, maintaining and alignment to avoid strain; alternatively, it may incorporate a développé to the front or side for variation. Precision is key, as the lean must remain controlled without collapsing the supporting knee or arching the lower back excessively. Penché is frequently employed in adagio sequences during class or performance to build lyrical expression and dramatic tension, allowing dancers to showcase fluidity and poise in slow, sustained movements. This term highlights the artistry of , where the forward inclination evokes vulnerability and extension, often enhancing narrative depth in or solos. Mastering penché demands significant core and back strength to stabilize the and spine against the forward pull of , preventing compensatory twists or sways that could compromise alignment. Dancers develop this through targeted conditioning, focusing on the erector spinae and abdominal muscles to support the extended posture without fatigue.

Other Terms

Tutu

The tutu is a signature element of attire, consisting of a short, multi-layered made primarily from or similar netting materials to create a stiff, voluminous that projects outward from the dancer's . This construction typically involves a fitted attached to the , with layers ranging from three to twelve or more, depending on the style, to achieve the desired shape and support. The primary function of the tutu is to facilitate for the legs and feet while visually framing the lower body, thereby highlighting intricate footwork and extensions essential to . Historically, the tutu originated in the Romantic era of ballet, with its first notable appearance in 1832 when wore a version in the premiere of at the Paris Opéra, choreographed by her father Filippo Taglioni. This early romantic tutu was soft and flowing, made of lightweight gauze or in multiple layers, extending to mid-calf or ankle length to evoke an ethereal, sylph-like quality suited to supernatural themes in Romantic ballets. Over the course of the , the tutu evolved into the shorter classical form to accommodate the demands of increasingly virtuosic choreography, allowing greater visibility of the legs during jumps, turns, and pointe work in productions like and The Sleeping Beauty. Classical tutus are distinguished by their rigidity and brevity, typically ending just below the hips, and include subtypes such as the , which uses a wired hoop at the base for a flat, disc-shaped profile that sits horizontally; the bell tutu, featuring a flared, conical shape without a hoop for a more natural drape; the platter tutu, a flatter variation of the pancake with minimal projection; and the powder-puff or Balanchine tutu, which is softer and rounded without wiring to complement neoclassical styles. These variations are crafted from stiffer materials like tarlatan combined with , often treated for added volume and durability, enabling dancers to execute complex movements without restriction. In contemporary practice, synthetic fabrics have largely replaced traditional or , offering enhanced lightness and resilience while preserving the tutu's aesthetic and performative role.

Balletomane

A balletomane is an avid enthusiast of , characterized by a passionate devotion to the art form, frequent attendance at live performances, and extensive knowledge of the classical and contemporary repertory. These individuals immerse themselves in the nuances of , technique, and history, often recognizing specific ballets, composers, and dancers from memory. The term originated in Russia as "baletoman," a portmanteau of "balet" () and "mania," coined in the to describe the fervent fans of the Imperial Russian Ballet who formed a distinct cultural subculture in St. Petersburg and . It entered English usage around 1930, amid the growing popularity of in the United States, particularly in New York, where influential supporters like championed the arrival of European artists and helped establish institutions such as the in 1934. This period marked a shift as balletomanes transitioned from European aristocracy to a broader American audience, fueling the art's expansion beyond elite circles. Balletomanes engage in a range of dedicated activities, including collecting programs, posters, and recordings as personal archives of performances, as well as writing critiques and analyses that contribute to scholarly and public discourse on ballet. Their enthusiasm often extends to influencing trends, such as advocating for particular repertory revivals or supporting emerging choreographers, thereby shaping audience preferences and the evolution of ballet companies. In particular, they admire performers for their technical prowess and expressive artistry. In the modern context, balletomanes connect through online communities and forums dedicated to ballet discussion, while streaming platforms enable global access to performances, allowing fans to engage with international repertory from home. Services like Marquee TV and Medici.tv have democratized viewing, fostering a new generation of enthusiasts who blend traditional fandom with digital participation.

Révérence

In , a révérence is a formal of performed as a bow by male dancers or a by female dancers, typically involving a deep plié with one foot placed behind the other. The execution begins from a preparatory position, often fifth position, where the dancer slides one foot back with the pointed and resting lightly on the floor, maintaining an upright torso. The arms are rounded in a graceful port de bras, either extended forward or curved elegantly at the sides, emphasizing poise and throughout the slow, controlled descent and rise. The movement is performed with deliberate slowness and fluidity to convey and , directed toward the audience, a partner, the , or the accompanist. For females, the deepens the plié while keeping the back straight and the head slightly bowed; males execute a forward-leaning bow from the waist, with arms often opening wide in a sweeping before closing. This distinction highlights gender-specific traditions in , rooted in historical French courtly manners. Révérence is traditionally used at the conclusion of a class to honor the instructor and musicians, or during curtain calls in performances to acknowledge from the . It serves as an essential , reinforcing the discipline and respect inherent in ballet culture. Variations include the simple révérence, a modest bend suitable for classroom settings, and the grand révérence, which features a deeper plié and more elaborate arm movements for theatrical emphasis.

Manèges

In ballet, manèges refers to a series of steps or enchaînements performed in a circular pattern around the stage, evoking the motion of a . The term derives from the French word manège, which originally denoted a riding for training horses in circular exercises and later came to mean "carousel," reflecting the rotational flow of the movement. Dancers execute manèges using dynamic steps such as turns, piqué turns, jetés, or sautés de basque, traveling fluidly to cover the stage while maintaining precision and momentum. Execution involves planning the circular path by dividing it into segments—such as straight lines across the front and diagonals to the sides—to ensure even spacing and avoid drifting. The direction can be or counterclockwise, depending on the , with dancers coordinating spotting (using the eyes to fix on points), arm positions, and footwork to sustain balance and speed; maximum power is applied on straight sections, with a slight adjustment at corners for control. Manèges may be performed by soloists to highlight or by groups to create visual , often requiring sustained stamina through deep breathing and core engagement. These patterns are commonly featured in codas or the finales of variations to build dramatic energy and propel the performance toward a climactic close. A notable example appears in the finale of , where performed a whirlwind manège of tombés and coupé jetés en tournant, showcasing explosive athleticism. Other instances include the Sugar Plum Fairy's piqué turns in and sequences of double sautés de basque in variations, emphasizing the form's role in heightening theatrical impact.

Hortensia

Hortensia, pronounced [awr-tahn-SYAH], is a step specific to male dancers in , executed as a small jump in which the dancer draws up the legs with one in front of the other, reverses their positions several times in the air without beating, and lands with the feet apart. This creates a precise foot change that highlights agility and control. The etymology is uncertain, possibly derived from the Latin Hortense, the name of a figure associated with an 18th-century French , or from hortensia meaning "." As a historical French term from the lexicon, the hortensia emphasizes tiny, intricate movements often incorporated into male variations to demonstrate finesse and technical precision. Though documented in authoritative references, it remains a rare step in contemporary practice, appearing infrequently in modern repertoires due to its specialized nature. The action relates to other small jumps like the royale or soubresaut, functioning as a variant that incorporates a simple beating element through the leg reversal.

References

  1. https://en.wiktionary.org/wiki/soubresaut
Add your contribution
Related Hubs
User Avatar
No comments yet.