Hubbry Logo
RG-33RG-33Main
Open search
RG-33
Community hub
RG-33
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
RG-33
RG-33
RG-33
View on Wikipedia
from Wikipedia

Key Information

RG-33L (six wheel extended variant)
TypeMine-Resistant Ambush Protected Vehicle
Service history
Used byUS Army
US Marines
Croatian Army
WarsGlobal war on terrorism
Production history
DesignerLand Systems OMC
ManufacturerBAE Systems Land Systems South Africa
Unit cost$630,000
ProducedOctober 2006 (RG-33L)[1]
VariantsRG-33L (6x6)
Specifications
Length28 feet (8,500 mm)
Width8 feet (2,400 mm)
Height9.5 feet (2,900 mm)
Crew2 + 12 crew
Armormonocoque v-hull
Main
armament
Optional armored glass turret or remote weapon station
EngineCummins 400 Turbo Diesel
400hp
TransmissionAllison 3200
Suspension6x6 Double wishbone suspension
Ground clearance14 inches (360 mm)
Fuel capacity80 gal
Maximum speed70 miles per hour (110 km/h)

The RG-33 is a mine-resistant light armored vehicle initially designed by BAE Systems Land Systems South Africa (formerly Land Systems OMC), a South African subsidiary of BAE Systems. BAE Systems in the US extensively modified it with additional protection, new powertrain, and suspension systems. It was built in a number of locations including York, Pennsylvania. It was one of several vehicles being fielded by the US Armed Forces in Iraq under the United States MRAP program.

Overview

[edit]

It is based on the RG-31, which itself is based on the Mamba APC, although it is roughly twice the weight of a RG-31. There are two variants, the standard RG-33 has four wheels and weighs 22 tons while the extended RG-33L variant has six wheels, can carry twice as many people in the back, and weighs 26 to 37 tons depending on the version.

It was selected to be the sole producer of the US Army's $2.88 billion Medium Mine Protected Vehicle program.[2][3] The initial contract is worth $20 million. BAE representative Doug Coffey says that live-fire testing at Aberdeen, Maryland, proved the RG-33 to be the overall most survivable MRAP vehicle.[4]

The RG33 is manufactured in several configurations including the category I 4×4, category II 6×6, the heavy armored ground ambulance (HAGA) and the special operations command (SOCOM) vehicle.[5][unreliable source?]

Design

[edit]

It features a monocoque armoured v-hull, for maximized interior space, seats and footrests suspended from the ceiling, run-flat tires, and an optional armored glass turret (Gunner Protection Kit or GPK), for maximized visibility and protection. The monocoque hull does not extend under the engine like some other armoured vehicles. The engine compartment is a separate monocoque structure that bolts to rest of the hull. The vehicle is notable for its extensive use of TRAPP armored glass in the crew compartment. Like the Buffalo, it can be equipped with a robotic arm.

The U.S. has fielded 259 RG-33 4x4 variants in a Special Operations Command (SOCOM) configuration as shown above with remote weapon stations, two extra seats, and a rear door assist.[6] The U.S. has also fielded 16 RG-33L 6x6 variants in a Heavy Armoured Ground Ambulance (HAGA) configuration.[7]

The Pentagon has future plans to add the Crows II remote weapon station, Boomerang anti-sniper system, and the Frag Kit 6 anti-EFP armour.

Production history

[edit]
  • On 26 January 2007, four (2 of each variant) RG-33s were delivered to the United States Marine Corps for testing.
  • On 14 February, an order for 15 MRAP Cat 1 RG-33s and 75 MRAP Cat 2 RG-33Ls was placed under an Indefinite Delivery, Indefinite Quantity contract.[8]
  • On 28 June, BAE received a $235.8M order for 16 RG-33 Cat 1 patrol vehicles, 239 RG-33L Cat 2 vehicles, 170 RG-33 Cat 1 variants for the United States Special Operations Command, out of their total allotment of 333 vehicles, and 16 RG-33L Cat 2 Ambulance variants, which are the first vehicles in the competition specifically listed for the ambulance role.[8][9] The vehicle can be mission configured for a number of roles including Infantry Carrier, Ambulance, Command and Control, Convoy Escort and Explosive Ordnance Disposal. On 18/Oct, an additional order for 600 MRAPS was received, involving 399 RGL-33L Cat 2, 112 RGL-33L Cat 2 Ambulance variants and 89 RG-33 SOCOM for 322 Million dollars. On Dec/18/07 a further order for 600 RG-33L Cat 2 was awarded to BAE Systems, for 645 Million dollars. To date, this gives a total of 1,735 RG-33 vehicles being ordered by the US Military.
  • On 2 December 2012, BAE received a $37.6 million contract to convert 250 RG-33L 6×6 vehicles up to the Medium Mine Protected Vehicle status. Differences include a rear ramp for deploying unmanned ground vehicles, a new heating and air conditioning system, larger modular interior, high mobility chassis, extensive equipment options, larger bullet-resistant windows, and 360-degree situational awareness suite.[10]

Versions

[edit]
  • RG-33 (4×4)
  • RG-33L (6×6)

Operators

[edit]
Map with RG-33 operators in blue

 Burundi

 Croatia

 Djibouti

Egypt

 Nigeria

  • Took delivery of 24 RG-33s after being refurbished.[16]

 United States

Uzbekistan

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

RG-33

View on Grokipedia
from Grokipedia

The RG-33 is a family of mine-resistant ambush protected (MRAP) vehicles designed and initially produced by BAE Systems Land Systems South Africa, featuring a monocoque V-shaped hull that deflects blast energy from mines and improvised explosive devices to enhance occupant survivability. Available in 4×4 and 6×6 wheeled configurations, the vehicle accommodates 2–13 personnel depending on variant and provides modular mounting for weapons systems, including remote weapon stations for machine guns or missile launchers. Developed in the early 2000s amid rising threats from roadside bombs in asymmetric warfare, the RG-33 was selected by the United States military under the MRAP program to replace less protected HMMWVs, with production ramping up in 2007 for deployment in Iraq and Afghanistan where it demonstrated superior blast resistance in operational testing. Variants such as the command and control vehicle (C2V), heavily armored ground ambulance (HAGA), and special operations armored utility vehicle (AUV) extend its roles beyond troop transport to medical evacuation and reconnaissance. Its adoption by U.S. forces, including the Marine Corps and Army, marked a shift toward heavily armored wheeled platforms, influencing subsequent vehicle designs focused on underbody protection. The RG-33 has been exported to multiple nations, including operations in Africa and the Middle East, underscoring its versatility across diverse terrains from deserts to urban environments, though exact user lists vary by configuration and remain classified in some cases. With a combat weight around 22–25 tons for the 6×6 model and powered by a turbocharged diesel engine delivering over 300 horsepower, it balances mobility with armor, achieving road speeds up to 100 km/h while maintaining low ground pressure for off-road capability.

Development and Procurement

South African Origins

The RG-33 mine-resistant ambush protected (MRAP) vehicle was initially designed by BAE Systems Land Systems South Africa, formerly Land Systems OMC, a company rooted in South Africa's defense sector with expertise honed from decades of countering landmine and ambush threats. South African engineers developed such vehicles in response to the high incidence of anti-vehicle mines during the Border War (1966–1990) and internal insurgencies, where improvised explosive devices caused significant casualties among military and civilian forces. This experience led to pioneering V-hulled monocoque constructions, which distribute blast energy away from occupants, a core feature of the RG-33's underbody design. Development of the RG-33 accelerated in the mid-2000s, drawing directly from earlier RG-series platforms like the RG-31 (introduced in the 1990s for mine protection) and RG-32, which incorporated modular armor and high ground clearance tailored to rugged terrains and explosive threats common in southern African operations. Land Systems OMC refined these concepts, integrating advanced materials for ballistic resistance up to STANAG Level 1 and mine protection equivalent to 6–10 kg TNT blasts under the hull. The vehicle's 6x6 configuration emphasized payload capacity (up to 10 tons) and mobility with independent suspension, reflecting South African priorities for operational versatility in low-intensity conflicts. By 2007, the RG-33 had evolved into a scalable family of MRAPs, with the South African variant emphasizing export potential and adaptability for peacekeeping or counter-insurgency roles, predating its adaptation for international programs. This foundational design stemmed from over 40 years of iterative South African innovations, including hull shaping techniques first proven in vehicles like the Casspir during the 1980s, ensuring survivability without excessive weight penalties.

Integration into US MRAP Program

The United States Department of Defense initiated the Mine Resistant Ambush Protected (MRAP) program in 2006 to counter improvised explosive device (IED) threats in Iraq and Afghanistan, prioritizing vehicles with V-shaped hulls for blast deflection and high underbody protection levels. The RG-33, a South African-designed monocoque armored vehicle licensed to BAE Systems, was evaluated for Category II classification, which targeted mid-sized 6x6 configurations for logistics, convoy security, and troop transport with payloads up to approximately 20,000 pounds. BAE Systems submitted RG-33 prototypes demonstrating superior mine resistance through independent testing, outperforming some competitors in blast survivability metrics under the program's Joint Requirements Oversight Council criteria. On January 26, 2007, the United States Marine Corps received initial deliveries of four RG-33 vehicles—two 4x4 Category I variants and two 6x6 Category II variants—for operational testing at Marine Corps bases, focusing on mobility, protection, and integration with existing logistics. This evaluation led to rapid procurement decisions; by February 14, 2007, the USMC awarded BAE Systems an initial order for 15 Category I and 75 Category II RG-33s, valued at part of broader MRAP funding exceeding $1 billion across vendors. The selection emphasized the RG-33's balance of protection, off-road capability via 6x6 drivetrain, and capacity for 6-10 personnel, addressing urgent operational needs statements from theater commanders. Integration accelerated with production ramp-up at BAE facilities in the United States, including York, Pennsylvania, where vehicles were customized for US specifications such as enhanced armor kits and compatibility with American weapon systems. By November 2007, the USMC issued $322 million in delivery orders for 600 survivability-enhanced RG-33 Category II vehicles, incorporating engineering changes for improved blast mitigation based on early field data. Subsequent contracts extended to the US Army and Special Operations Command, with a June 2008 $53 million modification for 40 RG-33L armored utility variants, ensuring fleet-wide standardization under MRAP sustainment protocols. This procurement integrated over 700 RG-33s into joint forces by 2009, with vehicles forward-deployed for route clearance and personnel transport in high-threat environments.

Production Contracts and Timeline

The RG-33 entered production for the US military under the Mine Resistant Ambush Protected (MRAP) program in early 2007, with BAE Systems Land Systems South Africa awarded initial contracts by the US Marine Corps. On January 26, 2007, four prototype vehicles—two 4x4 Category I and two 6x6 Category II variants—were delivered for testing, following an initial order placed that month for these units. In February 2007, the USMC placed a follow-on order for 15 additional RG-33 vehicles to expand evaluation and early fielding. Subsequent MRAP contracts rapidly scaled production, totaling $302.4 million for 535 Category I (4x4) and Category II (6x6) vehicles, including variants such as ambulances and special operations configurations. By November 2007, cumulative orders reached $627.5 million for 292 Category I vehicles, with deliveries targeted for completion by March 2008 for 4x4 models and April 2008 for 6x6 models. A December 18, 2007, award added $645 million for 600 enhanced Category II 6x6 RG-33L vehicles, bringing the MRAP-specific total ordered to approximately 1,735 units across configurations. In August 2008, a final $43.5 million USMC contract covered 40 specialized variants, including 36 for special operations command. BAE Systems completed MRAP production and closed the dedicated line on November 20, 2008. Parallel to MRAP fielding, the RG-33 platform was selected in January 2008 as the basis for the US Army's Medium Mine Protected Vehicle (MMPV) program, targeted at engineer and explosive ordnance disposal roles, with BAE as sole producer under a potential $2.3–2.88 billion indefinite delivery, indefinite quantity framework for up to 2,500 vehicles through 2015. The initial MMPV contract, valued at $20 million, funded nine test vehicles and support services, with deliveries starting May 2008. A $132 million follow-on in 2008 procured 179 production MMPVs. Later sustainment included a December 2012 $37.6 million award for parts to convert 250 existing RG-33 MRAP Category II vehicles to MMPV standards, emphasizing retrofits over new builds as the program matured. Overall RG-33 family production exceeded 2,500 units by program end, primarily between 2007 and 2015.

Technical Design

Hull and Blast Protection

The RG-33 employs a monocoque V-shaped hull constructed primarily from high-hardness steel, which directs the force of underbelly explosions outward and away from the occupant compartment to mitigate blast effects. This design leverages principles of blast deflection, channeling symmetrical and asymmetrical threats—such as those from landmines or improvised explosive devices (IEDs)—to reduce transmitted shock to the crew and vehicle structure. Base armor configuration offers protection against small arms fire up to 7.62 mm medium machine gun rounds and equivalent mine blast threats, with the V-hull exceeding contemporary standards for mine-resistant ambush protected (MRAP) vehicles at the time of procurement. Additional modular appliqué armor kits can be fitted to enhance ballistic and fragmentation resistance without compromising the core blast-deflecting geometry. The hull's integrated energy-absorbing seats and floor further attenuate residual overpressure and fragments, contributing to crew survivability in high-threat environments.

Mobility Systems and Drivetrain

The RG-33's propulsion system centers on a Cummins 400 I6 inline-six diesel engine rated at 400 horsepower, paired with an Allison 3200 series automatic transmission for smooth power delivery across varied terrains. This configuration enables the vehicle to achieve a maximum road speed of approximately 110 km/h (68 mph), with sufficient torque for off-road operations while maintaining compatibility with faster convoy elements like Stryker brigades. Drivetrain setups differ by variant: the Category II 6x6 model employs a full-time all-wheel-drive system across six wheels for enhanced traction and load distribution, whereas the lighter Category I 4x4 variant uses a four-wheel-drive configuration optimized for special operations requiring air transportability. Both incorporate run-flat tire technology to sustain mobility post-puncture, supporting missions in mine-threat environments. Suspension employs leaf-type springs on the front axles with hydraulic damping units at each wheel station, contributing to a ground clearance of 14–15 inches (360–380 mm) that facilitates blast deflection and cross-country performance without compromising stability under combat loads. Fuel capacity stands at 80 gallons (303 liters), providing operational range adequate for extended patrols, though exact endurance varies with payload and terrain. These elements collectively prioritize rugged mobility over speed, aligning with the vehicle's role in counter-IED route clearance and convoy protection.

Armament and Defensive Systems

The RG-33 features modular armament configurations, typically including a remote weapon system (RWS) or a protected manned turret mounting a single weapon such as a 12.7 mm heavy machine gun, 7.62 mm medium machine gun, 5.56 mm light machine gun, or 40 mm automatic grenade launcher. Some variants incorporate a one-man armored glass turret with 360-degree rotation, providing the gunner protection from small arms fire while allowing engagement of threats. Defensive systems emphasize blast and ballistic survivability, with a monocoque V-shaped hull designed to deflect and dissipate energy from underbelly mine or improvised explosive device (IED) detonations, achieving protection levels against multi-hit anti-tank mines and equivalent blasts. The hull provides baseline ballistic resistance to 7.62 mm medium machine gun fire and 5.56 mm small arms penetration from multiple angles, supplemented by transparent armor windows and add-on appliqué plates for enhanced threat mitigation. Interior features include energy-absorbing blast-resistant seats that isolate occupants from shock waves and an automatic fire suppression system to counter post-detonation fires or incendiary threats. Additional gunner protection kits and survivability gear, such as spall liners, further reduce fragmentation risks.

Variants and Configurations

Category II 6x6 Base Model

The Category II 6x6 base model represents the standard infantry carrier configuration of the RG-33 MRAP series, optimized for transporting personnel in high-threat environments with superior blast resistance and mobility relative to lighter variants. This configuration employs a 6x6 wheeled drivetrain, enabling better weight distribution and traversal of uneven terrain compared to 4x4 models. Equipped with a Cummins 400 I6 diesel engine and Allison 3200 automatic transmission, the vehicle attains a maximum road speed of 110 km/h while maintaining operational effectiveness in explosive hazard zones. Its dimensions—8.58 m in length, 2.44 m in width, and 3.45 m in height—support a capacity of 14 personnel, comprising 2 crew and 12 passengers seated in a spacious armored compartment. The core protection scheme features a monocoque V-shaped hull that redirects underbody blast energy from mines and improvised explosive devices (IEDs), supplemented by resistance to small arms fire and shell fragments. Optional BAE Systems LROD slat armor provides defense against RPG-7 projectiles. A rear hydraulic ramp facilitates swift entry and exit, while large ballistic windows enhance situational awareness without compromising integrity. In its base armament setup, a roof-mounted turret supports a 7.62 mm or 12.7 mm machine gun, with provisions for remote weapons stations. Supporting systems include a central tire inflation mechanism for optimized ground traction and compatibility with add-on kits for mission-specific adaptations, though the model prioritizes core survivability and troop transport roles.

Category I 4x4 Variant

The Category I 4x4 variant of the RG-33 represents the lightest configuration within the MRAP family, optimized for superior mobility, reduced logistical footprint, and potential air transportability in roles requiring agility over heavy payload capacity. Classified as the smallest MRAP category by weight, dimensions, and troop-carrying ability, it utilizes a Unimog-derived 4x4 chassis with independent double-wishbone suspension to navigate varied terrains while maintaining the signature V-shaped monocoque hull for deflecting blast energies from mines and IEDs. This variant contrasts with the Category II 6x6 (RG-33L) by offering approximately half the personnel capacity—seating up to 8 operators or troops—and a curb weight around 14 metric tons, enabling faster deployment and lower fuel consumption at the expense of reduced armor volume and payload. Propulsion consists of a Cummins ISM 400 inline-6 turbocharged diesel engine producing 400 horsepower, paired with an Allison 3200 series automatic transmission driving all four wheels, which supports off-road speeds up to 65 km/h and operational ranges exceeding 500 km depending on load and terrain. Defensive features include modular appliqué armor kits for ballistic protection against small arms and fragments, optional remote weapon stations (such as CROWS for .50-caliber machine guns or grenade launchers), and provisions for electronic countermeasures like jammers against radio-controlled IEDs. The design emphasizes rapid egress via a rear ramp and blast-attenuating seats, with empirical testing under the MRAP program validating its resistance to 6-8 kg TNT equivalents under the hull. Procurement focused on urgent operational needs during counterinsurgency campaigns, with BAE Systems securing a $213.9 million U.S. Marine Corps contract in June 2007 for 425 Category I 4x4 units alongside initial Category II prototypes, prioritizing rapid production at facilities in South Africa and the U.S. to meet Joint IED Defeat Organization timelines. Additional orders included specialized U.S. Special Operations Command (SOCOM) variants designated M1238, incorporating enhancements like upgraded thermal imaging, increased crew accommodations, and integrated CROWS II systems for covert missions, though exact quantities remain classified. These vehicles entered service primarily with Marine Expeditionary Units and SOCOM elements, valued for their balance of protection and deployability in theater-specific logistics constraints.

Specialized Mission Variants

The RG-33 family includes several mission-specific configurations beyond standard troop transport, such as the Heavy Armored Ground Ambulance (HAGA), Mine-Resistant Recovery and Maintenance Vehicle (MRRMV), and Command and Control Vehicle (C2V), each retaining the core V-hulled blast protection while incorporating role-tailored equipment. These variants were developed to address requirements in improvised explosive device (IED)-heavy environments, with initial U.S. contracts awarded in 2007 including 112 HAGA units and subsequent orders for specialized types. The HAGA, a 6×6 variant, serves as a heavily armored medical evacuation platform capable of transporting up to six casualties—either three on stretchers or six seated—with a rear step that folds into a loading ramp for rapid access. It integrates the Automated Patient Record Processing System (APRPS) and Theater Medical Information Program (TMIP) for on-board medical data management, powered by the standard Cummins 400 I6 diesel engine achieving a maximum road speed of 110 km/h and a range of 483 km. Protection levels match the base model against small arms, artillery fragments, and underbelly blasts, with optional modular add-on armor; an initial production run of 16 units was ordered in October 2007, supporting potential scaling to 1,742 ambulances. The MRRMV, also 6×6, functions as a recovery asset for disabled MRAPs, featuring a rear-mounted 40-ton capacity crane with 360-degree rotation and a front winch offering 40-ton pull over 61 meters of rope. Accommodating two crew plus two recovered personnel, it maintains brigade combat team mobility at up to 110 km/h despite a 40,000 kg gross weight, and includes optional explosive ordnance disposal (EOD) arms, 6 kW auxiliary power units, and remote cameras for safe operations. Debuted at the Association of the United States Army (AUSA) winter symposium in February 2008, this variant addresses maintenance needs in mine-threat zones without compromising the vehicle's inherent survivability. The C2V supports command functions in convoy security, infantry patrols, and reconnaissance, equipped with modular communication suites including battalion-level satellite (SATCOM) and civilian cellular integration for enhanced situational awareness. It carries one driver plus four personnel, with options for 7.62 mm or 12.7 mm machine guns via remote stations or ring mounts, plus features like hydraulic ramps and central tire inflation; propulsion mirrors other variants for 108 km/h speeds. Additionally, Special Operations Command (SOCOM) configurations, often 4×4, incorporate remote weapon stations and extra seating for elite unit missions, with deployments starting in summer 2008 and orders totaling at least 94 units by 2010. Other adaptations, such as EOD and route clearance setups on the 6×6 chassis, integrate robotic systems and larger ballistic windows for explosive disposal tasks, fulfilling Medium Mine Protected Vehicle (MMPV) roles while preserving air-transportability and high-mobility traits. These specialized variants collectively enhance operational flexibility, with over 2,200 RG-33 units—including such configurations—delivered to U.S. forces by July 2010.

Operational Deployment

Iraq War Service (2007–2011)

The RG-33 mine-resistant ambush protected (MRAP) vehicle was procured under the U.S. Department of Defense's urgent MRAP initiative in response to escalating improvised explosive device (IED) threats during the 2007 Iraq surge, with BAE Systems receiving initial contracts valued at over $122 million for 215 Category I and II variants in February 2007. Production ramped up rapidly, enabling fielding to U.S. forces in Iraq by mid-2008, as the vehicle's V-shaped hull and armored monocoque design provided enhanced survivability against mines and underbelly blasts compared to earlier up-armored HMMWVs. Special operations variants of the RG-33 were deployed to Iraq starting in summer 2008 for use by U.S. Special Operations Command (SOCOM) units, supporting missions in high-threat areas like Anbar Province, including transport of Special Operations Task Force-West personnel to Camp Ramadi in August 2008. The 4x4 and 6x6 configurations facilitated convoy escort, route clearance, and patrol operations, where the vehicles' capacity for 6–10 personnel and resistance to small arms fire and RPGs proved valuable amid persistent insurgent ambushes. By February 2009, the cumulative fielding of over 10,000 MRAPs—including RG-33 models—in Iraq marked a milestone in force protection efforts. From 2009 through 2011, RG-33 vehicles sustained roles in security and logistics during U.S. drawdown operations, with upgrades addressing theater-specific issues like improved blast mitigation and operational readiness in Iraq. Production of the RG-33 ceased in 2010 after approximately 2,633 units across variants, but existing fleets remained active until the majority of U.S. combat forces withdrew by December 2011, contributing to overall MRAP program goals of minimizing casualties from asymmetric threats despite logistical strains from the vehicle's size and weight. Non-combat incidents, such as rollovers due to high center of gravity, were reported across MRAP types in Iraq, prompting training enhancements by mid-2009.

Afghanistan Theater Use (2008–2014)

The RG-33 mine-resistant ambush protected (MRAP) vehicle entered service in the Afghanistan theater with United States Special Operations Command (SOCOM) units during the summer of 2008, supporting counterinsurgency operations against Taliban forces employing improvised explosive devices (IEDs) as a primary tactic. Its monocoque V-shaped hull design channeled blast forces away from occupants, offering superior protection compared to earlier up-armored HMMWVs against underbelly mine and IED strikes, alongside resistance to small arms fire and medium machine guns up to 14.5 mm. SOCOM variants, including the Category II 6x6 configuration, accommodated up to seven personnel and integrated systems like the Common Remotely Operated Weapon Station (CROWS) for remote gunnery, enhancing force protection during high-risk patrols and raids. In response to Afghanistan's rugged terrain, which challenged the RG-33's mobility relative to lighter vehicles, USSOCOM initiated upgrades in 2009, incorporating Oshkosh TAK-4 independent suspension systems on select RG-33 fleets to improve off-road articulation and stability for mountain and desert operations. These enhancements aligned with the broader U.S. troop surge under Operation Enduring Freedom, where MRAP vehicles like the RG-33 contributed to a measurable decline in U.S. fatalities from IED attacks; post-2007 fielding reduced the likelihood of death in such incidents compared to allied forces without equivalent platforms. Army Special Forces utilized RG-33s for route clearance and direct action missions in southern provinces, sustaining deployments through 2014 amid persistent insurgent ambushes. ![RG-33 operators in field operations][float-right] Despite its blast deflection capabilities, the RG-33 faced vulnerabilities to exceptionally large command-detonated IEDs, as evidenced by occasional mission-kill incidents requiring in-theater armor retrofits for enhanced underbody shielding. By 2014, as U.S. drawdown accelerated, RG-33 usage tapered in favor of more agile successors like the M-ATV, though its empirical role in enabling safer mobility for special operations underscored the MRAP program's adaptation from Iraq-centric designs to Afghan threats. Overall, the vehicle's deployment exemplified rapid acquisition priorities, with BAE Systems delivering over 2,000 RG-33 units across U.S. services by late 2008, a portion allocated to SOCOM for theater-specific needs.

Post-Combat and Domestic Roles

Following the drawdown of U.S. forces in Iraq and Afghanistan by 2011 and 2014, respectively, surplus RG-33 vehicles were retrofitted for continued military service in non-combat roles. The U.S. Army initiated conversions of RG-33 MRAP Category II platforms into Mine Resistant Multi-Purpose Vehicles (MMPV) Type I, with contracts awarded to BAE Systems for modifying approximately 250 units to support explosive ordnance disposal (EOD) companies, combat engineer units, and chemical, biological, radiological, and nuclear (CBRN) response teams. These configurations emphasized route clearance, hazard reconnaissance, and ordnance disposal in domestic training environments and potential hazardous domestic operations, leveraging the vehicle's inherent blast protection while adapting it for specialized tooling and robotics. Excess RG-33L variants, as part of the broader MRAP fleet, were included in transfers to U.S. law enforcement agencies through the Department of Defense's 1033 program, which facilitates redistribution of surplus military equipment. By April 2014, over 196 MRAPs had been allocated to agencies for domestic security missions, including SWAT operations, serving high-risk warrants, active shooter responses, and drug interdiction, with RG-33 models noted among the heavy tactical vehicles available for such repurposing. These transfers, starting in August 2013, addressed post-combat inventory reduction while providing agencies with armored platforms suited to urban and rural threat mitigation, though specific RG-33 allocations to individual departments remain limited in public documentation.

Operators and Users

United States Military Branches

The RG-33 mine-resistant ambush-protected vehicle was procured by the United States Marine Corps (USMC) under the MRAP program to enhance convoy protection and troop survivability against improvised explosive devices. In February 2007, the USMC issued an initial order for 15 Category I 4×4 RG-33 vehicles and 75 Category II 6×6 variants. Subsequent contracts expanded this fleet, including a June 2007 award of $213.9 million to BAE Systems for 425 additional Category I 4×4 and 16 Category II vehicles, supporting roles such as infantry carrier, ambulance, and command post. By late 2007, cumulative USMC orders reached approximately 292 Category I and 843 Category II RG-33s, reflecting the vehicle's selection for its V-hull design and capacity to carry up to 14 personnel in the 6×6 configuration. The United States Army adopted the RG-33 for similar counter-IED missions, with procurement tied to operational needs in Iraq and Afghanistan. Contracts for spare parts and vehicle resets confirm Army integration, such as a 2012 agreement with BAE Systems to convert RG-33s into medium armored ground ambulances and other configurations, reusing components to sustain fleet readiness. Army usage emphasized the 6×6 Category II variant for explosive ordnance disposal and engineer support, leveraging its 12-ton payload and independent suspension for rough terrain. No specific procurement quantities for the Army are publicly detailed beyond program-wide MRAP allocations, but maintenance support indicates sustained operational employment post-2007. United States Special Operations Command (SOCOM) operates customized RG-33 variants, including the 4×4 SOCOM Armored Utility Vehicle (AUV), equipped with remote weapon stations for machine guns and enhanced towing capacity of 36,000 pounds. These were fielded starting in summer 2008 for special forces missions in Iraq and Afghanistan, prioritizing modularity for reconnaissance, cargo, and direct action with ballistic windows and grenade launchers. SOCOM's adoption focused on the vehicle's agility in the lighter 4×4 class while retaining MRAP-level protection, distinguishing it from standard service branch configurations. No verified procurement or operational records exist for the RG-33 in the United States Navy, Air Force, or Space Force, consistent with their limited emphasis on heavy ground combat vehicles.

International and Non-State Operators

The Egyptian Armed Forces received 530 RG-33L vehicles as part of a broader U.S. transfer of 930 excess Mine-Resistant Ambush Protected (MRAP) vehicles under foreign military sales agreements, with deliveries spanning 2015 to July 2019; these included baseline RG-33L models (M1232) alongside variants such as the Heavy Armored Ground Ambulance (HAGA, M1233) and RG-33 Plus (M1237) for enhanced protection and utility roles. The Croatian Army operates 20 RG-33L 6x6 MRAP HAGA variants, primarily configured for medical evacuation within support commands, with vehicles entering service in the early 2020s to bolster protected casualty transport capabilities. Uzbekistan's armed forces utilize donated RG-33 armored personnel carriers, integrated into their inventory following U.S. military aid transfers around 2022, supplementing existing MaxxPro and Cougar MRAPs for internal security and border operations in a doubly landlocked strategic context. No verified non-state operators, such as private military contractors or insurgent groups, have been documented using RG-33 vehicles, with operational records limited to state militaries receiving U.S. surplus or direct procurement.

Performance and Evaluation

Survivability and Empirical Data

The RG-33 employs a V-shaped monocoque hull constructed from high-hardness steel and composite materials, which directs the energy of under-vehicle explosions outward and away from the crew compartment, providing protection against mines and improvised explosive devices (IEDs) rated up to 10 kilograms of TNT equivalent under any wheel. Energy-absorbing seating and floor configurations further mitigate blast transmission to occupants, reducing injury severity from shock waves and fragmentation. These features, informed by South African Casspir vehicle heritage and iterative U.S. testing, position the RG-33 as a Category II MRAP variant optimized for route clearance and convoy protection in IED-prone environments. Live-fire ballistic and blast testing conducted at Aberdeen Proving Ground in Maryland demonstrated the RG-33's superior survivability among MRAP variants, with BAE Systems representatives attributing this to integrated armor systems and hull geometry that outperformed competitors in withstanding repeated hits from small arms, rocket-propelled grenades, and underbody blasts. The U.S. Director of Operational Test and Evaluation (DOT&E) assessed the RG-33L ambulance variant as fully survivable against specified threats, including 14.5mm armor-piercing rounds and 155mm artillery fragments, following operational testing that incorporated field data from Iraq deployments. In empirical combat data from Iraq and Afghanistan, MRAP vehicles like the RG-33 contributed to a marked decline in IED-related fatalities; prior to widespread fielding in 2007, IEDs accounted for approximately 75% of U.S. casualties in those theaters, but post-deployment analyses showed personnel in MRAPs were 9 to 14 times less likely to suffer fatal injuries from equivalent attacks compared to up-armored HMMWVs. The Joint MRAP Program Office estimated the fleet, including over 2,400 RG-33 variants procured, averted around 10,000 potential deaths in Iraq through 2011 by enabling safer patrols in high-threat areas, though these figures derive from counterfactual modeling of pre-MRAP casualty patterns rather than direct incident tracking. Specific RG-33 incident reports highlight instances of crew survival after strikes involving multiple 100-plus kilogram IEDs, underscoring the design's causal effectiveness in channeling blast forces, though vulnerabilities to evolving tandem charges and above-armor attacks persisted in later theater adaptations.

Combat Effectiveness Metrics

The RG-33's blast resistance capabilities, tested to withstand up to 30 pounds of TNT under any wheel station and 154 pounds beneath the vehicle hull, contributed to its role in mitigating improvised explosive device (IED) threats during convoy and patrol missions. Ballistic protection standards included resistance to 7.62x54mm armor-piercing rounds at 30 meters, enabling sustained operational tempo in small-arms ambush environments. These design metrics translated to field performance where RG-33 variants supported urban route clearance and medical evacuation, with operational testing confirming effectiveness against required threats for Category II vehicles. Empirical estimates from the Joint MRAP Vehicle Program Office attribute approximately 40,000 lives saved to the MRAP fleet, including RG-33 deployments, with 10,000 in Iraq from April 2007 onward and 30,000 in Afghanistan starting February 2008. This reduction stemmed from the vehicle's V-shaped hull deflecting blast energy, which countered IEDs responsible for up to 75% of U.S. casualties prior to widespread MRAP fielding. However, effectiveness was tempered by mobility limitations, such as inadequate suspension leading to rollover risks in off-road scenarios, which occasionally compromised mission completion rates. In comparative evaluations, the RG-33 exhibited superior overall survivability in live-fire simulations at Aberdeen Proving Ground relative to other MRAP designs, per manufacturer testing data shared with evaluators. Program-wide metrics indicated MRAPs, including RG-33, reduced vehicle losses and crew fatalities in IED ambushes by enhancing post-attack mobility and firepower integration, such as with remote weapon stations for suppressive fire during extractions. Deployment data from over 15,000 fielded MRAPs by 2009 underscored these outcomes, though granular RG-33-specific casualty avoidance figures remain classified or aggregated within fleet totals.

Logistical and Maintenance Challenges

The RG-33's substantial weight, exceeding 25,000 pounds in its 4x4 configuration and up to 40,000 pounds for the 6x6 variant, posed significant challenges for transportation and recovery operations in theater, often requiring specialized heavy-lift equipment like the Oshkosh M1070 tractor or CH-47 Chinook helicopters for airlift, which strained air and ground logistics assets during peak deployments in Iraq and Afghanistan. Recovery teams frequently encountered difficulties towing or winching the vehicle due to its low ground clearance when damaged and V-hull design, necessitating on-site assessments and improvised rigging that extended downtime and increased vulnerability to further attacks. Maintenance demands were amplified by the vehicle's rapid production under the MRAP program, leading to elevated operating and sustainment costs estimated at over $500,000 per unit annually in early fielding phases, driven by complex armored hull repairs and proprietary components from BAE Systems. Shortages of spare parts and qualified technicians were recurrent issues, with unit-level logistics support summaries highlighting delays in part procurement and a reliance on contractor support for specialized repairs, such as independent suspension systems shared with heavy tactical trucks. Operator training gaps further compounded sustainment problems, as troops received limited pre-deployment instruction on RG-33-specific maintenance procedures despite its integration into force structures post-2007, resulting in higher non-mission-capable rates from improper diagnostics or deferred maintenance. The diversity of MRAP variants, including the RG-33 alongside other manufacturers' designs, fragmented supply chains and increased the logistical footprint for commonality in tools, fuels, and training across U.S. military branches. Recent Government Accountability Office assessments of ground vehicle fleets, encompassing MRAPs, underscore ongoing parts shortages and personnel skill deficits as factors reducing operational availability to below 70% in some units as of 2025.

Criticisms and Strategic Context

Mobility and Terrain Limitations

The RG-33's design prioritizes blast protection through a V-shaped monocoque hull and heavy armor, resulting in a curb weight of approximately 22,000 kg for the 4x4 variant and up to 24,000 kg for the 6x6 RG-33L, which imposes significant constraints on strategic and tactical mobility. These vehicles cannot operate on standard public roads outside military installations without specialized heavy equipment transporters due to their excessive width (over 2.5 meters) and axle loads exceeding civilian infrastructure limits, necessitating rail or lowboy trailer haulage for long-distance movement. In urban environments, the RG-33's overall dimensions—length exceeding 7 meters and width approaching 2.6 meters—limit maneuverability, making navigation through narrow streets, gates, or congested areas challenging, with difficulties in executing tight turns or reversing in confined spaces. Off-road, the elevated center of gravity from the V-hull (providing 14 inches of ground clearance) increases rollover risk on uneven surfaces, while the substantial mass reduces acceleration and traction on soft or steep inclines, demanding cautious operation to avoid road shoulder collapse or immobilization in unknown terrain. Deployment in Afghanistan highlighted terrain-specific limitations, where the RG-33's weight and size proved suboptimal for high-altitude, narrow mountain passes and loose gravel trails compared to Iraq's more predictable road networks; vehicles frequently became stuck, prompting feedback-driven upgrades like independent suspension kits to enhance off-road agility, though these did not fully mitigate the inherent trade-offs of mass for protection. Maximum on-road speeds of 103–110 km/h offer reasonable highway performance with a Caterpillar C7 engine producing 330 horsepower, but fuel efficiency suffers under load, averaging 2–3 miles per gallon off-road, further constraining operational range in remote areas without robust resupply.

Cost-Benefit Analyses

The RG-33's acquisition costs varied by production lot and variant, with unit prices for U.S. military contracts ranging from approximately $1.3 million to $1.6 million per vehicle, reflecting enhancements for mine resistance and ambush protection. For instance, a 2008 U.S. Marine Corps contract modification valued at $53 million covered 40 RG-33L vehicles, equating to about $1.325 million each, while later lots reached $1.562 million per unit. These figures contributed to the broader MRAP program's procurement expenditures exceeding $10 billion across thousands of vehicles, with sustainment costs adding billions more due to the fleet's size and complexity. Operational and maintenance costs for MRAP-class vehicles like the RG-33 were substantially higher than for lighter tactical wheeled vehicles, driven by their weight (up to 25 tons), fuel inefficiency, and specialized repairs. Annual maintenance for an MRAP averaged around $49,400 per vehicle—roughly ten times that of up-armored HMMWVs—encompassing battle damage repairs, field support, and high OPTEMPO demands in theater. Logistical burdens included elevated fuel consumption (due to V-hull design and armor) and transport challenges, as the RG-33's dimensions limited airlift options compared to predecessors, straining supply chains in Iraq and Afghanistan. In terms of benefits, the RG-33 enhanced survivability against improvised explosive devices (IEDs) and mines, with empirical data showing MRAPs achieving a 6% casualty rate (killed or injured) in attacks versus 22% for up-armored Humvees. Fielding of MRAPs, including RG-33 variants, correlated with an 80% potential reduction in vehicle-borne IED casualties, as estimated by Marine Corps leadership, and broader program data indicated IED fatalities dropping as a percentage of total combat deaths from 2007 onward. Live-fire tests at Aberdeen Proving Ground demonstrated the RG-33's superior blast deflection via its monocoque V-hull, outperforming other MRAPs in simulated IED strikes without crew fatalities in early deployments. Cost-benefit evaluations remain contested, with analyses weighing lives saved against expenditures using value-of-statistical-life (VSL) metrics around $7.5 million. Economists Rohlfs and Sullivan calculated MRAP-like armored vehicles averted fatalities at $1.1–$24.6 million per life (preferred estimate under $7.5 million), based on Iraq/Afghanistan data, but critiqued the program's scale as inefficient since IED threats declined post-2007 and medium-armor alternatives achieved comparable protection at lower cost. Counterarguments emphasize causal impact: without MRAPs, casualty rates would have mirrored pre-fielding levels, potentially costing hundreds more lives amid peak IED usage, though high sustainment and mobility trade-offs diminished net value in shifting counterinsurgency dynamics.

Broader MRAP Program Debates

The MRAP program's rapid expansion, initiated in 2006 to counter improvised explosive device (IED) threats in Iraq and Afghanistan, sparked debates over its overall value amid escalating costs exceeding $45 billion for over 27,000 vehicles across variants including the RG-33. Proponents, including the Department of Defense, argued that MRAPs reduced fatalities by providing superior blast protection, with claims of averting up to 40,000 casualties through v-shaped hulls and elevated crew compartments that mitigated underbody blasts more effectively than up-armored Humvees. However, empirical analyses, such as a 2012 study by economists Christopher Rohlfs and Ryan Sullivan, found that MRAPs yielded no statistically significant reductions in fatalities beyond those from factory-armored Humvees, estimating a cost of $1 million to $2 million per infantry life saved when accounting for the program's scale. Critics highlighted opportunity costs, noting that funds diverted from lighter, more versatile platforms like the Joint Light Tactical Vehicle (JLTV) strained logistics due to MRAPs' 20-30 ton weights, which demanded specialized transport, fuel consumption rates up to 10 times higher than Humvees, and limited airlift compatibility. In counterinsurgency contexts, heavy MRAP reliance encouraged convoy-based operations over dismounted patrols, potentially undermining population-centric strategies by reducing soldier-civilian interactions essential for intelligence gathering and hearts-and-minds efforts, as observed in tactical shifts post-2007 surge. Battlefield data from the Joint Improvised Explosive Device Defeat Organization indicated IED attacks peaked at over 3,000 monthly in 2007 before declining, but attribution to MRAPs alone was contested, with factors like enemy adaptations via explosively formed penetrators (EFPs) and improved route clearance contributing significantly. Government Accountability Office (GAO) evaluations underscored sustainment challenges, with post-fielding costs for maintenance and parts exceeding initial projections; by 2011, the Army faced $1.6 billion annually in MRAP upkeep amid excess inventory after troop drawdowns, prompting resets and exports but revealing initial acquisition haste that prioritized speed over long-term testing. Debates also encompassed Pentagon reform, as the program's Joint Program Office bypassed traditional milestones to deliver 16,000 vehicles by 2010, exposing systemic delays in prior IED responses and fueling arguments for streamlined urgent needs processes despite risks of overproduction. While MRAPs demonstrably lowered per-incident casualty rates—DOT&E reports noted crew survival rates above 90% in mine/IED hits versus 50-70% in Humvees—their niche focus on blast threats left vulnerabilities to kinetic attacks, prompting post-2014 shifts toward multi-role vehicles.

Upgrades and Future Role

Field Modifications and Conversions

In response to operational needs, RG-33 vehicles underwent field upgrades including the installation of modular add-on armor kits to enhance ballistic and fragmentation protection, as well as transparent armor panels for improved crew visibility and situational awareness. These modifications were facilitated through field service support contracts, such as the $44 million agreement awarded to BAE Systems in June 2010 by the US Marine Corps Systems Command, which enabled on-site enhancements to nearly 250 Special Operations Command (SOCOM) RG-33 variants, incorporating independent suspension systems for better mobility over rough terrain. Conversions of RG-33 MRAPs to multi-mission roles were primarily conducted at depots but supported by field kits, exemplified by the $37.6 million contract issued to BAE Systems in November 2012 by Letterkenny Army Depot to supply parts for retrofitting 250 Class II RG-33 vehicles into Medium Mine-Protected Vehicles (MMPVs) tailored for explosive ordnance disposal (EOD), combat engineering, and chemical-biological response teams. These conversions involved integrating robotic arms for ordnance handling, reinforced chassis for equipment mounting, and specialized interiors, allowing the vehicles to replace older Husky systems in route clearance operations. Such adaptations extended the RG-33's utility beyond initial ambush protection, addressing post-2011 drawdowns in Iraq and Afghanistan by repurposing surplus fleets for engineering tasks.

Recent Contracts (Post-2014)

In 2015, the United States initiated transfers of excess Mine Resistant Ambush Protected (MRAP) vehicles to Egypt under the Excess Defense Articles (EDA) program, facilitated through Foreign Military Sales cases. Among the 930 MRAPs delivered by July 2019, approximately 530 were RG-33L variants, including armored ambulances and other configurations, with shipments continuing through multiple batches, such as a second consignment in October 2016 and a final delivery of 101 vehicles in July 2019. These transfers supported Egypt's counter-terrorism operations in the Sinai Peninsula and other regions, providing enhanced protection against improvised explosive devices without new production contracts from BAE Systems. Egypt subsequently requested an additional 1,000 MRAPs through the EDA program in 2019, though specifics on RG-33 inclusion and fulfillment remain unconfirmed in public records. Post-2014 U.S. contracts primarily involved sustainment and recapitalization rather than procurement of new RG-33 units, reflecting the wind-down of the original MRAP surge program. For instance, BAE Systems received awards for spare parts, field service support, and vehicle resets, but no major foreign sales or domestic production orders for additional RG-33 vehicles have been reported beyond surplus dispositions.

Legacy in Modern Warfare

The RG-33's V-shaped monocoque hull design, which deflects blast energy from improvised explosive devices (IEDs) outward and away from occupants, established a benchmark for mine-resistant vehicle architecture that persists in contemporary armored platforms. This configuration, proven effective in absorbing symmetrical and asymmetrical blasts during extensive operations in Iraq and Afghanistan where it contributed to reduced casualty rates from under-vehicle explosions, informed subsequent U.S. programs like the Joint Light Tactical Vehicle (JLTV), which incorporates comparable blast-mitigation principles while prioritizing enhanced mobility over the RG-33's heavier profile. Empirical data from MRAP deployments, including the RG-33, demonstrated up to 90% commonality in parts across variants, enabling scalable production and maintenance that influenced modular designs in later vehicles for counterinsurgency environments. Post-2014, the RG-33 has transitioned from primary combat roles in U.S.-led coalitions to sustainment and specialized missions, with U.S. Special Operations Command (SOCOM) initiating reset activities on RG-33-A1 variants as recently as fiscal year 2019 to extend service life for explosive ordnance disposal (EOD) and route clearance operations. While large-scale drawdowns in Afghanistan rendered many MRAPs excess by 2014, the RG-33's adaptability—evidenced by variants like the RG-33 IED with robotic arms for device neutralization—has sustained its utility in asymmetric threats where IEDs remain prevalent, such as in African and Middle Eastern stability operations. U.S. transfers of MRAP fleets, including RG-33-compatible systems, to partners like Egypt (930 vehicles completed by 2019) underscore its ongoing role in bolstering allied capabilities against non-state actors employing buried ordnance. In broader modern warfare contexts, the RG-33 exemplifies the MRAP program's rapid acquisition success, fielding over 12,000 vehicles by 2012 to counter IED evolution, though its legacy tempers enthusiasm for heavy platforms with recognition of terrain-specific limitations that spurred lighter successors. Exported to operators including Croatia and integrated into multinational forces, the vehicle continues to shape tactics for convoy protection and urban patrols in low-intensity conflicts, where its capacity to carry up to eight personnel under medium machine-gun fire and blast protection levels exceeding prior standards provides a causal edge in survivability against persistent guerrilla threats. This enduring design rationale prioritizes empirical blast-testing outcomes over theoretical mobility trade-offs, informing global militaries' shift toward hybrid protected-mobility fleets amid hybrid warfare paradigms.

References

  1. https://www.baesystems.com/en/product/rg33-mineresistant-ambush-protected-vehicle
  2. https://www.globalsecurity.org/military/systems/ground/rg-33-program.htm
  3. https://www.army-technology.com/projects/rg33-mrap/
  4. https://armyrecognition.com/military-products/army/armoured-personnel-carriers/mrap/rg33-c2v-united-states-uk
  5. https://armyrecognition.com/military-products/army/armoured-personnel-carriers/mrap/rg-33-haga-united-states-uk
  6. http://www.army-guide.com/eng/product4919.html
  7. https://tanknutdave.com/the-south-african-rg-33-mrap/
  8. https://armormax.com/blog/mrap-vehicle-specs/
  9. https://www.militaryfactory.com/armor/detail.php?armor_id=840
  10. https://armyrecognition.com/military-products/army/armoured-personnel-carriers/mrap/rg33-ussocom-united-states-uk
  11. https://www.asianmilitaryreview.com/2018/10/the-mrap-story-learning-from-history/
  12. https://www.dote.osd.mil/Portals/97/pub/reports/FY2010/dod/2010mrap.pdf?ver=2019-08-22-112846-567
  13. http://www.army-guide.com/eng/product3551.html
  14. https://www.upi.com/Defense-News/2007/11/09/BAE-wins-322M-USMC-MRAP-order/77771194653445/
  15. https://defense-update.com/20080108_rg-33-selected-army-mmpv.html
  16. https://www.army-technology.com/news/news3621-html/
  17. https://www.deagel.com/Armies/RG-33/a000012
  18. https://www.spacedaily.com/reports/BAE_Receives_US_Army_Contract_For_MMPV_999.html
  19. https://www.defenseindustrydaily.com/the-us-armys-mmpv-eodengineer-vehicles-04559/
  20. https://www.globalsecurity.org/military/systems/ground/rg-33.htm
  21. https://www.americanspecialops.com/vehicles/rg-33/
  22. https://armyrecognition.com/military-products/army/armoured-personnel-carriers/mrap/rg33-uav-united-states-uk
  23. https://www.scribd.com/doc/51237449/TM-9-2355-320-10-RG33L-Plus
  24. https://military-history.fandom.com/wiki/RG-33
  25. https://warwheels.net/RG33LmrapINDEX.html
  26. https://armyrecognition.com/military-products/army/engineer-maintenance-vehicles/armored-recovery-vehicles/rg33-mrrmv-united-states-uk
  27. https://armyrecognition.com/military-products/army/armoured-personnel-carriers/mrap/rg33-category-ii-united-states-uk
  28. https://warwheels.net/RG33_4x4mrapINDEX.html
  29. https://armyrecognition.com/military-products/army/armoured-personnel-carriers/mrap/rg33-4x4-united-states-uk
  30. https://warwheels.net/RG33_4x4socomMRAPindex.html
  31. https://defense-update.com/20070216_order-215-mrap.html
  32. https://www.globalsecurity.org/military//library/news/2007/02/mil-070205-bae-systems02.htm
  33. https://www.facebook.com/USARMYTransportationMuseum/posts/rg33lmine-resistant-ambush-protected-vehicle-mrapextensive-combat-operations-in-/1739848086112139/
  34. https://www.army.mil/article/17268/10000th_mrap_fielded_in_iraq
  35. https://www.dvidshub.net/news/66431/mrap-theater-upgrade-key-soldier-survivability
  36. https://www.army.mil/article/44962/army_hits_drawdown_milestones_in_iraq
  37. https://www.defensedaily.com/bae-systems-caiman-and-rg33-mrap-production-ends/army/
  38. https://www.militarynews.com/peninsula-warrior/news/top_stories/army-fields-new-mrap-rollover-trainers-in-iraq-afghganistan/article_12c5b3d3-1f78-526c-b8f1-1c12b36efc91.html
  39. https://defenceweb.co.za/land/land-land/ussocom-upgrades-rg33-fleet-for-afghan-ops/
  40. https://oshkoshdefense.com/oshkosh-defense-receives-orders-from-bae-systems-valued-at-24-million-to-supply-tak-4-independent-suspension-for-mraps/
  41. https://www.mcclatchydc.com/news/nation-world/national/national-security/article24570925.html
  42. https://www.nationaldefensemagazine.org/articles/2014/4/1/2014april-repurposed-mraps-find-new-life-in-police-agencies
  43. https://www.army-technology.com/news/newsus-army-contracts-bae-for-rg33-vehicle-reset-programme/
  44. https://defensemirror.com/news/1917/BAE_Systems_Secures__66_Million_in_U_S__Army_Contracts_for_MRAP_Spare_Parts
  45. https://www.menadefense.net/egypt-receives-930-us-surplus-mraps-and-orders-1000-more/
  46. https://www.israeldefense.co.il/en/node/39877
  47. https://central.asia-news.com/en_GB/articles/cnmi_ca/features/2022/12/01/feature-03
  48. https://www.erdc.usace.army.mil/Media/News-Stories/Article/476365/gsl-presents-results-of-mine-resistant-ambush-protected-vehicle-study/
  49. https://www.globalsecurity.org/military/library/budget/fy2009/dot-e/dod/2009mrap.pdf
  50. https://www.usatoday.com/story/news/world/2012/09/30/mraps-saved-lives/1600693/
  51. https://apps.dtic.mil/sti/tr/pdf/ADA582916.pdf
  52. https://www.nationaldefensemagazine.org/articles/2012/10/1/2012october-the-mrap-was-it-worth-the-price
  53. https://www.gao.gov/assets/gao-08-884r.pdf
  54. https://www.military.com/defensetech/2007/10/23/a-primer-in-mrap-variants
  55. https://alu.army.mil/alog/pdf/septoct12/lessonslearned_recoveryoperation.pdf
  56. https://apps.dtic.mil/sti/tr/pdf/ADA536424.pdf
  57. https://info.publicintelligence.net/MRAP-ULSS.pdf
  58. https://www.defensemedianetwork.com/stories/mrap-and-m-atv-logistics-and-support-answering-unique-challenges/
  59. https://www.gao.gov/products/gao-25-108679
  60. https://armyrecognition.com/military-products/army/engineer-maintenance-vehicles/deminining-vehicles/rg33-ied-united-states-uk
  61. https://api.army.mil/e2/c/downloads/2025/08/25/2be47465/bulletin-13-05-mine-resistant-ambush-protected-mrap-vehicles.pdf
  62. https://www.globalsecurity.org/military/library/report/call/call_08-30.pdf
  63. https://static.e-publishing.af.mil/production/1/af_a4/publication/qtp24-3-c507/qtp24-3-c507.pdf
  64. https://www.motortrend.com/how-to/131-1001-mrap-vehicles-6x6-military-trucks-iraq
  65. https://forthoodsentinel.com/news/improved-mraps-afghan-bound/article_742f2e20-7180-54f2-9856-ce69b0618cb9.html
  66. https://armyrecognition.com/military-products/army/armoured-personnel-carriers/mrap/rg33-socom-auv-united-states-uk
  67. https://www.army-guide.com/eng/product3551.html
  68. https://defense-update.com/20070627_mrap.html
  69. https://warontherocks.com/2021/12/stop-undermining-partners-with-gifts/
  70. https://www.nationaldefensemagazine.org/articles/2011/9/1/2011september-why-troops-love-and-sometimes-hate-the-mrap
  71. https://www.globalsecurity.org/military/systems/ground/mrap.htm
  72. https://papers.ssrn.com/sol3/papers.cfm?abstract_id=1916818
  73. https://www.foreignaffairs.com/responses/why-mrap-worth-money
  74. https://www.foreignaffairs.com/world/mrap-boondoggle
  75. https://smallwarsjournal.com/2007/10/19/mraps-and-coin/
  76. https://apps.dtic.mil/sti/tr/pdf/ADA502129.pdf
  77. https://csbaonline.org/uploads/documents/2007.10.17-Of-IEDs-and-MRAPs.pdf
  78. https://www.gao.gov/assets/gao-10-155t.pdf
  79. https://www.gao.gov/products/gao-08-884r
  80. https://www.gao.gov/products/gao-11-766
  81. https://defenceweb.co.za/land/land-land/bae-field-upgrading-rg33-mrap-vehicles/
  82. https://www.baesystems.com/en-us/article/bae-systems-selected-by-army-depot-for-military-vehicle-conversion
  83. https://www.army.mil/article/224742/security_enterprise_delivers_excess_vehicles_to_egypt
  84. https://enterprise.press/stories/2016/10/04/egypt-gets-american-mraps/
  85. https://www.military.africa/2019/07/egypt-receives-930-u-s-mraps-requests-additional-1000-units/
  86. https://armyrecognition.com/archives/archives-land-defense/land-defense-2019/egypt-to-receive-additional-1000-mrap-from-us-eda-program
  87. https://defensemirror.com/news/4340/BAE_wins__164_million_contract_for_MRAP_RG_33_vehicles_from_U_S
  88. https://www.nationaldefensemagazine.org/articles/2023/1/20/special-operators-look-for-easy-vehicle-upgrades
  89. https://www.army.mil/article/103351/vehicles_to_serve_as_reminder_of_mrap_legacy
Add your contribution
Related Hubs
User Avatar
No comments yet.