Hubbry Logo
Coins of the Canadian dollarCoins of the Canadian dollarMain
Open search
Coins of the Canadian dollar
Community hub
Coins of the Canadian dollar
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Coins of the Canadian dollar
Coins of the Canadian dollar
from Wikipedia

The coins of Canada are produced by the Royal Canadian Mint and denominated in Canadian dollars ($) and the subunit of dollars, cents (¢). An effigy of the reigning monarch always appears on the obverse of all coins.[1] There are standard images which appear on the reverse, but there are also commemorative and numismatic issues with different images on the reverse.

Circulation denominations

[edit]

There are six denominations of Canadian circulation coinage in production: 5¢, 10¢, 25¢, 50¢, $1, and $2. Officially they are each named according to their value (e.g. "10-cent piece"), but in practice only the 50-cent piece is known by that name. The three smallest coins are known by the traditional names "nickel" (5¢), "dime" (10¢), and "quarter" (25¢), and the one-dollar and two-dollar coins are called the "loonie" (a hypocorism of the loon depiction on the reverse) and the "toonie" (a portmanteau of "two" and "loonie") respectively. The production of the Canadian 1-cent piece (known as the "penny") was discontinued in 2012, as inflation had reduced its value significantly below the cost of production.

Canadian coins have medallic orientation, like British or euro coins, and unlike U.S. coins, which have coin orientation.

Canadian coins
Value Image Technical parameters Description English name French name First minted Discontinued Withdrawn
Obverse Reverse Diameter Thickness Mass Composition Edge Obverse Reverse
19.05 mm 1.45 mm 2.35 g
  • Plain (1920–1981, 1997–2012)
  • 12-sided (1982–1996)
Queen Elizabeth II Maple leaf Penny
  • Sou/cent/cenne
  • Cent noire
  • Cenne noire
1953 May 2012
  • February 4, 2013
  • In limited use
21.2 mm 1.76 mm 3.95 g
  • 94.5% steel
  • 3.5% copper
  • 2% nickel plating
  • Plain (1922–1942, 1963–present)
  • 12-sided (1942–1962)
Queen Elizabeth II Beaver Nickel
  • Cinq sous
  • Cinq cents
  • Cinq cennes
1953 Still produced Still in use
10¢ 18.03 mm 1.22 mm 1.75 g
  • 92% steel
  • 5.5% copper
  • 2.5% nickel plating
Milled The Bluenose Dime
  • Dix sous
  • Dix cents
  • Dix cennes
1953
25¢ 23.88 mm 1.58 mm 4.4 g
  • 94% steel
  • 3.8% copper
  • 2.2% nickel plating
Caribou Quarter
  • Vingt-cinq sous
  • Vingt-cinq cents
  • Vingt-cinq cennes
  • Trente sous
1953
50¢ 27.13 mm 1.95 mm 6.9 g
  • 93.15% steel
  • 4.75% copper
  • 2.1% nickel plating
Canadian coat of arms 50¢ piece, half-dollar
  • Cinquante sous
  • Cinquante cents
  • Cinquante cennes
1959 Produced but uncirculated since 2004.[citation needed] Only sold by mint for $1/coin.[citation needed]
King Charles III 2023
$1 32.15 mm 2.88 mm 15.62 g 99.9% nickel Queen Elizabeth II Voyageurs in a canoe
  • Voyageur dollar
  • "Silver" dollar
1953 1987 Replaced by the loonie in 1987. Obsolete but still legal tender. In limited use.[citation needed]
$1 26.5 mm 1.95 mm 7 g
  • 91.5% nickel
  • 8.5% bronze plating (88% copper, 12% tin)
Plain, 11-sided Queen Elizabeth II Common loon Loonie
  • Piastre
  • Piasse
  • Huard
1987 2011 Still in use
6.27 g Brass-plated steel Common loon with security feature 2012 2023
King Charles III 2023 Still produced
$2 28 mm 1.8 mm 7.3 g
  • Ring:
  • 99% nickel
  • Centre:
  • 92% copper
  • 6% aluminium
  • 2% nickel
Intermittent milled / smooth Queen Elizabeth II Polar bear Toonie
  • Deux piastres
  • Deux piasses
1996 2011 Still in use
6.92 g
Intermittent milled / smooth / edge-lettered Polar bear with 2 security features 2012 Still produced
These images are to scale at 2.5 pixels per millimetre. For table standards, see the coin specification table.

The 50¢ piece circulates much less than other Canadian coins. Between the years 2000 and 2007 the Royal Canadian Mint struck fewer than 16 million of them; by contrast, during the same period, over 2.25 billion quarters were released. This coin is sometimes called a "half-dollar".

Other than the $2 coin (for which there is no American equivalent), the denominations of Canadian coinage correspond to those of United States coinage. The sizes of the coins other than the 50¢ piece are roughly equal to those of current U.S. coins, though this has not always been true. They have a different metallic composition and most of them are thinner, and thus weigh slightly less, than the analogous U.S. coins. The U.S. penny settled on its current size in 1857, whereas the Canadian penny was much larger (25 mm [1 in]) until 1920. Because they are easily mistaken for each other, U.S. and Canadian coins worth 5 cents, 10 cents, and 25 cents sometimes circulate in the other country. Due to the usually higher value of the U.S. dollar, it is common in Canada to accept U.S. coins at par or face value.[2] Canadian coins are not commonly accepted in the U.S. but sometimes circulate in states that see many Canadian visitors.[3] Their differing physical characteristics prevent them from being accepted interchangeably by most coin-operated machines.

There was formerly some correspondence between the size of Canadian coins and British coins of similar value, leading to them sometimes being mistaken for the other due to the identical portrait of the monarch. For example, the large Canadian penny was identical in size and value to the contemporary British half-penny, which was 25 mm (1 in) in the Edward VII version, and slightly larger during Victoria's reign. Likewise, the Canadian quarter (23.81 mm diameter) was virtually identical in size and value to the British shilling – worth 12 British pence or about 24 Canadian cents, with a 24-millimetre (1516 in) diameter. The Canadian 5¢ coins, until the larger nickel coins of 1922, were 15 mm silver coins quite different from the U.S. "Liberty head" nickels of 1883 to 1913, which were 21.2 mm and copper-nickel alloy, but more like the older U.S. half dimes.

Developments in coinage

[edit]

The most significant recent developments in Canadian coinage were the introduction of $1 and $2 coins and the withdrawal of the one cent piece. The $1 coin (the "loonie") was released in 1987. The $1 banknote remained in issue and in circulation alongside the one-dollar coin for the next two years, until it was withdrawn in 1989. The coin was to be the voyageur-design silver (then nickel) dollar coins that had previously been in limited circulation. The dies were lost or stolen in November 1986, requiring a redesign.[4] The new coin is colloquially called the "loonie", for the common loon on its reverse, and the name is frequently applied to the currency unit as well. It is made of nickel plated with aureate bronze. The $2 coin, carrying a polar bear, was introduced in 1996. It is usually called the "toonie" and is bimetallic. The $2 banknote was withdrawn at the same time that the coin was released. Unlike several U.S. attempts to introduce a dollar coin, the new coins were quickly accepted by the public, owing largely to the fact that the Bank of Canada and the government forced the switch by removing the $1 and $2 bills from circulation.

Between 1997 and 2001, the $1 loon coin was not issued for general circulation. Due to the high demand for the $2 polar bear coin (mintages between 1997 and 2001 were as high as 29 million in 2000 alone), the $1 coin was only produced for the standard collector sets that were made available on an annual basis, such as the Uncirculated, O Canada, Specimen and Proof sets.

On March 29, 2012, the Canadian government announced that the 1¢ coin would be retired.[5] The Royal Canadian Mint stopped producing 1¢ coins in May 2012, and in February 2013 the Bank of Canada stopped distributing them, but the coins remain legal tender. Cash transactions are rounded to the nearest 5¢, while non-cash transactions (using cheques, credit cards, or debit cards) will continue to be rounded to the nearest 1¢.

Production

[edit]

Canadian coins are issued by the Royal Canadian Mint and struck at their facilities in Winnipeg. All special wording on commemorative coins appears in both of Canada's languages, English and French. All of the standard wording on the reverse sides of non-commemorative coins is identical in both languages. On the obverse sides, the name and title of the Canadian Monarch appear in an abbreviated-Latin circumscription. On coins struck since November 2023, this reads "Charles III D. G. Rex", but coins reading "Elizabeth II D. G. Regina" continue to circulate. The initials stand for "Dei gratia"; the entire phrases mean 'Charles III, by the grace of God, King' and 'Elizabeth II, by the grace of God, Queen'.

The Vancouver 2010 Winter Olympics commemorative quarters do not have the inscription "D.G. Regina", and they read "Canada Elizabeth II", along with the date of issue and Ilanaaq, the emblem of the games.

History

[edit]

Coins of the Colonies

[edit]

Beginning in 1858, various colonies of British North America started issuing their own coins denominated in cents, featuring the likeness of Queen Victoria on the obverse. These replaced the sterling coins previously in circulation. The Province of Canada was the first to issue decimal coins. They were based on the value of the American dollar, due to an influx of American silver.[6] Denominations issued were 1¢, 5¢, 10¢, and 20¢. The 1¢ coin was issued again in 1859, but it was very unpopular due to its extremely light weight. The coins had to be discounted by around 20% to get them into circulation. Other colonies that issued decimal coinage were New Brunswick and Nova Scotia both starting in 1861, Newfoundland in 1865, and Prince Edward Island in 1871. Many examples can be seen online via the Canadian Currency Museum.[7]

Queen Victoria coinage

[edit]

In 1867, the British parliament passed The British North America Act, 1867 (now known as the Constitution Act, 1867), uniting the Province of Canada, Nova Scotia, and New Brunswick into a single country. Coins of the three former colonies continued to circulate until 1870, with all being legal tender throughout the country.[8] As other colonies subsequently joined Canada, they dropped their colonial coinage and adopted the national Canadian currency.

In 1870, the first national coinage of the Dominion of Canada was issued in denominations of 5¢, 10¢, 25¢, and 50¢. A 1¢ coin was not issued until 1876.[8] The designs were standardized with the head of Queen Victoria on the obverse, value and date with a crowned maple wreath reverse, except for the 1¢ coin, which had on its reverse a maple vine circlet.[8]

King Edward VII coinage

[edit]

In 1902, the first coins of King Edward VII's coinage were issued. The 1902 5¢ coin is of interest to collectors, as its design includes the outmoded St. Edward's Crown instead of the Imperial State Crown. These coins were hoarded upon being issued, as the public believed that an error had been made. In 1903, the design of the 5¢ was modified accordingly.

In 1907, Heaton's Mint struck its last issue of Canadian coins – the 1907H 1¢, which is quite scarce. In 1908, the Royal Canadian Mint at Ottawa was opened. At that time the Ottawa mint was known as the Royal Mint, Ottawa branch. The name "Royal Canadian Mint" was first used in 1931.

The reverse design on the 10¢ coins include several varieties in relation to the leaves.

King George V coinage

[edit]

Edward VII died in 1910 and was succeeded by his son, King George V. His effigy appeared on all coins minted in Canada afterwards, as soon as new dies were obtained.[9]: 25 

The initial issue of George V coinage is known as the "Godless" coinage, because the abbreviation "Dei gra:", (for "Dei gratia" or '[king] by the grace of God'), was omitted from the king's titles. When the public noticed this, there was a huge outcry at this breach of tradition, and the phrase was later restored. All the coins from the 1¢ to 50¢ were issued. The 50¢ is the scarcest of all the coins minted in 1911, with a mintage of 209,972.[10] The Canadian Coin News publication printed an article showing a well-worn 1911 50¢ example that did have the "Dei gra:" abbreviation.[11] This coin has not yet been certified as genuine, having been rejected by ICCS, the popular Canadian grading company. The 1911 pattern dollar coin was produced with the "Dei gra:" abbreviation on the two known silver examples and the one known example in lead.

Obverse of a 1917 Canadian 10-cent piece

In 1920, the fineness of the silver coins was changed from .925 fine silver to .800 fine silver, and the size of the cent was reduced.[8] In 1921, the last silver 5¢ coins were struck. These are extremely rare, numbering less than 400. These were replaced in 1922 by a larger nickel coin, copying an earlier change in the United States, and building on the fact that Canada was the world's leading source of nickel ore.[9]: 38 

There are a few scarce dates, especially the 1925 and the 1926. There are two types of the 1926: the "near 6" type, which has the tail of the 6 lower down and near to the maple leaf, and the rarer "far 6" type. The 1921 50¢ is also an extremely rare coin. It is the rarest of the King George V series.

The first Canadian silver $1 coin was issued as a commemorative coin in 1935 to commemorate King George V's Silver Jubilee. The portrait of the King on this coin was the same as that of the coins of several other countries. This coin also bears the famous coureur des bois design, which was designed by Emanuel Hahn. This coin, and others issued since with this reverse design, have the nickname of "voyageur dollars".

1936 dot coinage

[edit]

King George V died on January 20, 1936, and was succeeded by King Edward VIII. Because his abdication occurred before production of any Canadian coinage with his likeness could commence, no Canadian coins bear his image.

In 1937, there was a pressing demand for 1¢, 10¢, and 25¢ coins, but, as the Royal Canadian Mint was waiting for new tools and matrices to arrive from the Royal Mint, the decision was made to strike coins dated 1936, but a dot would be added in the area near the date to indicate that the coins were struck in 1937. The 1¢ and 10¢ coins with the dot are exceedingly rare; so rare, in fact, that only four or five specimens are known.[12] In 2004, a "dot cent", as they are sometimes called, sold at auction for $207,000. The one-cent coin was sold again in the Canadiana sale for $400,000, while an example of the ten-cent piece with the dot sold for $184,000.[13] The 25¢ coin, while not as rare as the one-cent and ten-cent pieces, is still a very difficult coin to find.

Gold circulation coins

[edit]

Gold coins for circulation were issued from 1912 to 1914 only (earlier rejected "for fear of committing a breach of the Royal Prerogative"),[8] in $5 and $10 denominations,[14] though sovereigns, to British standards, were issued in small quantities for some years. The minting of gold coins for circulation ceased due to the onset of the First World War, when the government of Canada recovered the majority of circulating gold coins to finance the war.[15] Reissue plans were dropped in 1928.[14] According to the Mint, a large quantity of the 1912–1914 gold coins were stored by the Bank of Canada for over 75 years.[15] In 2012, the Mint offered 30,000 coins from the collection for sale to the public through its retail channels and stated that it would melt and refine the remainder of the 245,000 coins to sell the gold content.[15]

Year Denomination Mintage[16] For sale by the Mint in 2012[15]
1912 $5 165,680
1913 $5 98,832
1914 $5 31,122
Subtotal $5 295,634 5,761
1912 $10 74,759
1913 $10 149,232
1914 $10 140,068
Subtotal $10 364,059 24,239
Total $5, $10 659,693[a] 30,000
  1. ^ Of the 659,693 coins minted, 245,000 were held by the Bank of Canada until 2012, at which time 30,000 hand selected specimens were offered for sale by the Royal Canadian Mint, and the rest reportedly melted.[15]

King George VI coinage

[edit]
George VI 5¢ coin of 1937

In late 1937, the tools and matrices finally arrived from London, so the issue of the new coins of the reign of King George VI was struck immediately. The coins' current designs date from this period. The coins were as follows:

There was also a silver $1 that was issued in 1939 to commemorate the Royal Visit. The obverse has the usual portrait of George VI while the reverse depicts the Canadian Houses of Parliament in Ottawa. This was also designed by Emanuel Hahn.

During World War II, the demand for nickel for the war effort was great enough for the 5¢ coin to be issued in tombac instead.

While all Canadian George VI coins remain legal tender, the nickels are the only remaining George VI coinage in any nation that have been neither demonetized nor effectively withdrawn from circulation due to precious metal content (or, in the case of the penny, been withdrawn from circulation).

1947 maple leaf coinage

[edit]

Through 1947 the George VI coins bore the inscription Georgius VI D:G: Rex et Ind:Imp: ("Georgius VI, Dei gratia, Rex et Indiae Imperator", or 'George VI, by the grace of God, King and Emperor of India'). As India became independent that year as the Dominion of India and the Dominion of Pakistan, "Emperor of India" needed to be dropped from the coinage. However, there was a demand for coinage. While waiting for the new tools and matrices to arrive from the Royal Mint, the decision was made to strike 1947-dated coinage, but a maple leaf symbol would be added next to the date to indicate that the coins were struck in 1948.[17][9]: 27 

The silver $1 exists in two types: "tall 7" and "short 7". The voyageur $1 is also the rarest coin. The 1¢ is the most common coin. The 1¢ exists as two varieties, "blunt 7" and "pointed 7". The blunt 7 is scarcer and thus more valuable. The upper part of the 7 near the maple twig is slightly blunted compared to the normally found pointed variety. The pointed 7 is the same as used on the 1947 regular-issue 1¢. The 50¢ coin also exists with two "7" varieties. While fairly scarce, the curved left (or straight) 7 is much more common than the curved right 7. The regular 1947 50¢ coins also came with left and right curved 7 numerals. These 1947 varieties without the maple leaf are similarly valued except for the curved right 7 in extremely high grade.

The 1947 maple leaf 5¢, 10¢, and 25¢ do not have notable varieties and are all fairly common coins.

King George VI coinage (1948–1952)

[edit]

The new tools and matrices arrived from London, so the issuing of the maple leaf coinage ceased as a result. The obverse of the coins is inscribed Georgius VI Dei gratia Rex ('George VI by the grace of God, King'). During the issue of this coinage, a commemorative silver $1 was struck in 1949 to commemorate Newfoundland becoming the tenth province of Canada. The 1948 coins are very scarce, especially the 50¢ and the silver $1. This is due to the slow delivery of the modified tools and matrices from London.

In this coinage, there are several notable varieties. The first of these is the 1950 "no lines in 0" 50¢ coin. The most famous variety of this series is the "Arnprior dollar", which has one and a half waterlines near the bow of the canoe instead of the normal three waterlines. This variety is named after the town of Arnprior, Ontario, where this variety was discovered.

Queen Elizabeth II coinage

[edit]

Obverse

[edit]

Several series of coins have been issued under the reign of Elizabeth II, including the current series. There have been four different obverse portraits of the Queen used on Canadian coinage, with new portraits introduced in 1953, 1965, 1990 and 2003.

The first was used for the 1953 to 1964 coins, which featured an effigy of the Queen designed by Mary Gillick, with a wreath of laurel in the Queen's hair. In 1965, a new obverse was sculpted by Arnold Machin, showing a more mature Queen wearing a tiara. The legend on the obverse was also modified, by shortening the phrase Dei Gratia to "D.G." to save space.[17] These two versions of the Queen's portraits were designed by the British Royal Mint, and were similar to those used on British, Australian and New Zealander coinage.

The 1990 and 2003 portraits were designed by Canadian artists, the 1990 effigy by Dora dePedery-Hunt and the 2003 effigy by Susanna Blunt, and are unique to Canadian coinage.

Other aspects

[edit]

In 1959, the reverse of the 50-cent coin was redesigned. In 1957, the coat of arms of Canada was simplified. The Queen had suggested that the Tudor crown be replaced by the crown of Edward the Confessor. The changes were reflected in the 1959 50-cent coin.[17] The new reverse was modelled and designed by Thomas Shingles, updating the Canadian coat-of-arms.

In 1968, the 10-cent coin and higher denominations were debased, their silver alloy being replaced by nickel. The dime of 1969 has two varieties, a large 9 (rare) and small 9 (common). In 1973, a quarter commemorating the Royal Canadian Mounted Police was issued; it also has two varieties: a large bust (rare) and small bust (common).

In 1987, the $1 coin, colloquially known as the "loonie", was introduced, replacing the Voyageur dollar with a new design, new colour, and smaller size. This coin also replaced the $1 bill, which was subsequently withdrawn from circulation by the Bank of Canada. In February 1996, the $2 coin, or toonie, was released; it currently has three varieties. The toonie replaced the $2 bill.

In 2000, all coins below $1 were changed to steel with copper or nickel plating; in 2012, this was extended to the $1 and $2 coins as well. The 50-cent coin is regularly minted but not in large quantities; it is very rare to come across this coin in circulation, although an unsuccessful attempt was made by the Mint to promote the use of the coin when a special edition was released in 2002 marking the 50th anniversary of Elizabeth II ascending the throne.

Coins issued in 2002 do not have the usual mint date, which normally appears on the reverse side. Instead, the 2002 coins have a commemorative double-date on the obverse side: "1952–2002", to commemorate the 50th anniversary of the Queen's reign.

King Charles III coinage

[edit]

The Royal Canadian Mint stated that circulating coinage featuring Charles III would be released in the fourth quarter of 2023.[1]

The portrait of Charles III was designed by Steven Rosati, who was one of 350 artists to submit an entry to the Royal Canadian Mint for the portrait design.[18] The first strike of coins bearing the design were loonies pressed after the unveiling of the design on November 14, 2023; they were circulated in December 2023.[18][19]

Other numismatic details

[edit]

Special edition coins

[edit]

Although the Mint has produced many special edition coins in recent years, Canada does have a history of such coins. From 1943 to 1945, the Mint issued the "Victory nickel" to promote the Canadian war effort. In 1951 a circulating commemorative coin, a 5-cent piece for the bicentennial of the discovery of the element nickel, was released. In 1967, all Canadian coins were issued with special reverses to celebrate the Canadian Centennial. Six years later, a "Mountie quarter" was issued in 1973 to commemorate the centennial of the Royal Canadian Mounted Police.

In recent years, the Mint has issued several series of coins with special reverses. Most of them have been 25¢ coins, particularly in the years 1999–2001. There were also versions of the $2 coin commemorating the founding of Nunavut, and another with a family of polar bears; there have been several variants of the $1 coin, one of which featured the Canadian peacekeepers' monument in Ottawa to commemorate the award of the Nobel Peace Prize. A commemorative Terry Fox $1 coin began circulating on April 4, 2005.

On October 21, 2004, the Royal Canadian Mint unveiled a 25¢ poppy coin. This coin features a red poppy (Papaver rhoeas) that is coloured red, embedded in the centre of a maple leaf above a banner reading "RememberSouvenir". It is the world's first coloured coin. While some countries' mints have produced colourized coins for market to collectors, this is the first colourized coin in general circulation in the world.[20]

The Mint states that, with normal wear and tear, the colour should remain for a number of years, although this claim was quickly disproved.[citation needed] The colouration compounds are attached to the metal on a specially prepared 'dimpled' section of the coin and seem to come off easily if deliberately rubbed. The coin will retain its full value even if the red poppy has worn off or been removed; however, it is now expected that fully coloured specimens will become collectible in the future.

In an isolated incident in the United States these coins were briefly reported as a possible 'spy tool' by some US Defense Contractors unfamiliar with the odd-seeming coin and raised espionage warnings until the situation was clarified.[21][22]

On May 4, 2005, the Mint unveiled a new "Victory nickel", reminiscent of the original issued during the Second World War. The new coin commemorated the 60th anniversary of the Allied victory in World War II. A mintage of 59,258,000 Victory nickels were produced and treated as regular circulation coins.[23]

In 2005, 25¢ and $5 coins commemorating the centennial of two of Canada's provinces were released: the coin for Alberta represents oil exploration in that province; the coin for Saskatchewan depicts a singing meadowlark and a grain elevator. Later the same year, the Mint later issued a Year Of The Veteran coin to honour military veterans, again in the 25¢ denomination.

On February 21, 2007, the mint announced that they would be producing a 100-kilogram coin the size of a large pizza with a face value of $1 million. This new coin bears the highest face value in the world, using approximately $2 million of 99.999% pure bullion, and five were produced and sold to investors.[24][25]

Urban legends

[edit]

Several urban legends and other false information have circulated regarding Canadian coinage.

  • The centre can pop out of a toonie. This is in fact true, but only for coins struck in 1996. Many toonies in the first shipment of the coins were defective, and could separate if struck hard or frozen, as the centre piece would shrink more than the outside. This problem was quickly corrected, and the initial wave of "toonie popping" blew over a few months after the coin's introduction.[26]
  • The 50¢ piece is no longer minted and/or has been withdrawn from circulation. The 50¢ coin circulates so little that many people have never personally seen or handled one. Shop proprietors have been known to refuse to accept them as payment because they do not recognize them as Canadian currency. However, the RCM continues to produce the 50¢ coin annually for coin collections such as the Uncirculated, Specimen, and Proof Sets. Although the RCM does produce the coin in small numbers (in 2005, the mintage for the coins was 200,000, and the coins were not produced for circulation in 2003 and 2004);[27] most of them are purchased by coin collectors. The remainder go to banks, though most do not give them out unless the customer specifically requests so. Given enough notice, any bank should be able to obtain them in a significant quantity for their customers. The 50¢ coin is also commonly handed out as regular change at some Canada Post locations. An attempt at widening the circulation of the 50-cent piece was made in 2002 with the release of a specially designed coin marking the Golden Jubilee of Queen Elizabeth II, which was circulated through the Laura Secord Chocolates store chain in Canada.[28]
  • The crown is wrong in the Queen's portrait. When the new coin portrait was first issued in 1990 (see above), a legend surfaced that the artist had simply added the image of a crown to a portrait of the Queen, and that she was never meant to be seen wearing that headgear. This is false; she posed personally for the portrait wearing one of her usual crowns.[citation needed]

Effigies

[edit]

1953 – The coronation of a new monarch meant a new effigy. Due to an issue with the portrait model for the new Queen Elizabeth, two obverse varieties, termed the "no shoulder fold" and the "should fold" obverses were found in circulation during 1953. The portrait model was prepared in England by sculptor Mary Gillick. The relief of this model was too high. This affected the new effigy because the centre portion containing two lines on the shoulder (representing a fold in the Queen's gown) did not strike up well on the coins. This obverse had been termed the "no shoulder strap" variety by numismatists.

Later in 1953, Mint authorities decided to correct the defects in the obverse design. Thomas Shingles, chief engraver of the RCM, was summoned to lower the relief of the model. The result was that he had strengthened the shoulder and hair detail. This revised obverse (often called "the shoulder strap" variety due to the resemblance of the lines to a strap) was introduced before the end of the year. This was accepted as the standard obverse. The no shoulder fold obverse was used to produce some of the 1954 cents for the proof-like sets and a small quantity of 1955 cents for circulation. The 1955 no shoulder fold variety is the most desired by collectors.

1965 – Starting in 1965, the effigy of the Queen underwent the first of three changes. This new obverse featured the Queen with more mature facial features. The wearing of a tiara was the other aspect of the new effigy.

1990 – A new obverse debuted with the Queen now wearing a diamond diadem and jewellery. Although the effigy changed in 2003, this portrait with a diadem is still used on all Chinese Lunar New Year coins.

2003 – To commemorate the 50th anniversary of the coronation of the Queen, a new obverse was introduced. The unique feature of this effigy is that the Queen is without headdress. This marked the first time that the effigy of a monarch did not wear headdress since Elizabeth's father, King George VI, a half-century earlier.

Mint mark

[edit]

In an effort to build the brand, the Royal Canadian Mint implemented a policy in which all its circulation and collector coins would bear a new mint mark. Unveiled at the Canadian Numismatic Association convention in Niagara Falls, Ontario, in July 2006, the mint mark was a reproduction of the Royal Canadian Mint logo.

The first circulation coin to bear the new mint mark was the 10th anniversary $2 coin, illustrated by Tony Bianco. This meant that the "P" mint mark which recognized the plating technology would no longer be used. For collectors, the first collector coin to feature the new mint mark was the Snowbirds coin and stamp set.[citation needed]

Records

[edit]

In the Charlton Standard Catalogue of Canadian Coins, the 1911 $1 coin is valued at $1,250,000. There are only 2 known specimens in sterling silver, and one specimen in lead. One of the silver specimens and the lead specimen are located at the Bank of Canada's currency museum, while the other is in a private collection. The rarity stems from the fact the federal government chose not to proceed with producing a "silver dollar" in 1911. The 1911 coin sets were originally planned to include the $1, but the sets came with an empty gap where the $1 coin was supposed to be. Canada didn't issue a $1 circulation coin until 1935, when it issued a circulating dollar commemorating George V's Silver Jubilee.

Among numismatists, the 1921 50-cent coin is considered the rarest Canadian circulation coin and is known as The King of Canadian coins. As of 2012, a 1921 50-cent piece in MS-65 condition is valued at $250,000 to $350,000. [citation needed] Despite a mintage of 206,398 coins, there was a very low demand for 50-cent coins in the 1920s. The belief is that most of the 50-cent coins from 1920 and 1921 were melted (amounting to approximately 480,392 coins). [citation needed] The reason for the melting was that new coins were needed for 1929 and if coins from 1920 and 1921 were released into circulation, people would suspect counterfeit coins. According to legend, only 50 of these coins still exist (with only 3 known in mint state), and most of those are from Specimen Sets that were sold to people who visited the RC Mint.

Victory nickel

[edit]

(Tombac 1943–1944) (Steel 1944–1945)

Reverse of the Victory nickel, as minted in 1945

The 5-cent piece underwent a design change for the first time since 1937 when the beaver was first introduced. The new reverse featured a striking V design. In the interest of promoting the war effort, the famous V sign from Winston Churchill was adopted. Perhaps, the most unusual aspect of this coin was the Morse Code. The meaning was "We Win When We Work Willingly". The edges of the steel versions of the Victory nickel were known to rust.

Due to high demands for copper and zinc during the war effort, the use of Tombac was suspended. A new composition of steel with .0127 mm plating of nickel and .0003 mm plating of chromium became the norm.[citation needed] The plating process of these coins meant that strips had to be plated before blanks were punched out. The result was that the edges of the blanks were unplated. Although the RCM returned to nickel after WWII, the Korean war effort resulted in the use of steel again in 1951. Some of the steel coins were later discovered to have only the nickel plating and had a grey rather than the usual "bluish" appearance. Until recently, this variety did not command a premium price from collectors, but the fact that some years are rarer than others has started to generate interest in this variety.[citation needed]

References

[edit]

Further reading

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
The coins of the Canadian dollar comprise the standard circulating denominations used throughout , produced exclusively by the Royal Canadian Mint at its facility. These include the 5-cent (), 10-cent (dime), 25-cent (quarter), 50-cent, 1-dollar (), and 2-dollar () coins, with over 1 billion such coins minted annually to meet national demand. The 1-cent () denomination, featuring a design since 1937, was discontinued from production in 2012 and ceased distribution in 2013 due to escalating costs exceeding its face value; common examples continue to trade at face value or minor premiums in bulk, with no dramatic appreciation due to abundant supply. These coins reflect Canada's natural and cultural heritage through their reverse designs, while the obverse uniformly displays the effigy of the reigning sovereign—currently His Majesty King Charles III, introduced on circulation coins in 2023. The 5-cent coin, struck in pure since 1922 (with wartime exceptions), depicts a on a log, a design by G.E. Kruger-Gray adopted in 1937 to symbolize industriousness. The 10-cent coin, composed of nickel-plated steel, shows the famous schooner sailing vessel, created by Emanuel Hahn in 1937 to honor maritime prowess. The 25-cent coin, made from a three-ply structure of nickel-finished steel, features a majestic caribou, also by Kruger-Gray since 1937, representing the country's wilderness. The rarely circulated 50-cent coin, constructed with a core and plating, portrays the Canadian , a design by G.E. Kruger-Gray dating to 1937. The 1-dollar , introduced in 1987 to replace paper bills and save on printing costs, consists of aureate (a ) and bears a by Robert-Ralph Carmichael on its reverse. The 2-dollar , launched in 1996 with a bi-metallic ring-inset design for security, combines an outer ring and inner aureate core, featuring Brent Townsend's on ice. Commemorative variants of these denominations, often with special reverses, are periodically issued to mark national events, but standard circulation designs have remained largely consistent since the mid-20th century to foster familiarity and reduce production expenses through modern alloys like plated steel.

Current Circulation Coins

Denominations and Specifications

The standard circulating denominations of the Canadian dollar consist of the 5¢ (nickel), 10¢ (dime), 25¢ (quarter), 50¢ (half dollar), $1 (loonie), and $2 (toonie) coins, all produced by the Royal Canadian Mint under specifications defined in the Royal Canadian Mint Act. These coins are designed for everyday use, with physical characteristics that ensure durability, ease of identification, and compatibility with vending machines and coin-handling equipment. The 50¢ coin, while legal tender, is minted in limited quantities and primarily appears in collector sets rather than widespread circulation. The following table summarizes the key physical specifications for these denominations as of 2025:
DenominationCompositionWeight (g)Diameter (mm)EdgeShape
5¢ (nickel)Nickel-plated steel with copper and nickel (since 2012)3.9521.2PlainRound
10¢ (dime)Nickel-plated steel with copper and nickel (since 2012)1.7518.03ReededRound
25¢ (quarter)Nickel-plated steel with copper and nickel (since 2012)4.423.88ReededRound
50¢ (half dollar)Nickel-plated steel with copper and nickel (since 2012)6.927.13PlainRound
$1 (loonie)Multi-ply brass-plated steel (since 2012)6.2726.5Plain11-sided
$2 (toonie)Bi-metallic: aluminum bronze core with brass plating; nickel-plated steel outer ring (since 2012)6.9228Plain with interrupted groovesRound
The $2 toonie, introduced in 1996 to replace the $2 , was Canada's first bi-metallic circulating coin, featuring a distinctive ring-and-core that enhances and reduces counterfeiting risks while maintaining a lightweight profile for handling. Its technical design includes precise alignment of the inner core and outer ring to ensure structural integrity during high-volume production and use. All these coins are in , accepted at for transactions regardless of age or condition, though their practical usage favors lower denominations in daily retail due to the prevalence of electronic payments and the toonie's role in higher-value exchanges. The Royal Canadian Mint continues to produce them at the Winnipeg facility, with annual mintages exceeding one billion pieces across denominations to meet demand.

Design Elements and Security Features

The reverse designs of current Canadian circulation coins feature iconic symbols that reflect the nation's , , and cultural identity. The 5¢ coin, known as the , depicts a perched on a rock and dragging a log in a stream, a by British engraver G. E. Kruger Gray introduced in 1937. The symbolizes industriousness and has been an official emblem of since 1975, representing the country's and engineering prowess. The 10¢ coin, or dime, shows the famous under full sail, designed by Emanuel Hahn in 1937 to honor Nova Scotia's fishing and racing legacy. This vessel embodies Canada's maritime traditions and resilience. The 25¢ quarter portrays a caribou striding across a barren landscape, also by Hahn from 1937, evoking the rugged northern wilderness and wildlife that define much of the country's geography. The 50¢ coin displays the Canadian coat of arms, featuring a shield with symbols of the provinces, supported by a and , and topped by a royal crown; this design by Thomas Shingles has been in use since 1959. It represents national unity and sovereignty, with the motto "" ("From Sea to Sea") underscoring Canada's vast territory. The $1 coin, nicknamed the , features a on a lake, designed by Robert-Ralph Carmichael in 1987. The , Ontario's provincial bird, symbolizes the serene beauty of Canada's northern lakes and wild spaces. Finally, the $2 coin, or , shows a standing on an , created by Brent Townsend in 1996. This Arctic icon highlights Canada's role in polar conservation and its expansive northern frontiers. Security features on these coins incorporate advanced anti-counterfeiting measures, particularly on higher denominations, to deter while maintaining everyday usability. The $1 and $2 coins, made from multi-ply plated steel since , include a laser-etched on the reverse with micro-engraved year numbers visible under magnification, enabling precise authentication. The $2 coin additionally features a shifting of a that appears when tilted, along with edge lettering reading "" repeated around the rim. Lower denominations rely on intricate detailing, such as fine radial lines and precise edge treatments—the 5¢ is round with a plain edge for tactile identification by size and weight, aiding visually impaired users through feel, while the 10¢ and 25¢ have reeded edges. These elements, combined with the coins' varying sizes and weights, facilitate easy differentiation for . In 2023, the Royal Canadian Mint introduced a new obverse effigy of King Charles III, designed by Steven Rosati, marking the first update to the monarch's portrait in 70 years and appearing on all circulation coins starting with limited releases in December. This effigy, showing the king facing left in profile, integrates seamlessly with the existing reverse motifs while upholding the tradition of royal representation on Canadian currency.

Production and Minting

Facilities and Processes

The Royal Canadian Mint operates two primary facilities in , with the Winnipeg branch serving as the dedicated high-volume production site for all circulation coins since its establishment in 1976. Located at 520 Lagimodière Boulevard, this 14,864-square-meter state-of-the-art plant handles the manufacturing of Canadian nickels, dimes, quarters, 50-cent pieces, loonies, and toonies, as well as circulation coins for numerous foreign countries. In contrast, the Ottawa headquarters at 320 Sussex Drive focuses on bullion production, collector coins, medals, and research and development, allowing the Winnipeg facility to specialize in efficient, large-scale circulation output. The was discontinued from production in 2012 and ceased distribution in 2013. The minting process begins with the preparation of metal blanks, which are cut from coiled metal strips and undergo annealing—a controlled heating and slow cooling treatment—to soften the material and improve its malleability for striking. These annealed blanks are then fed into high-speed coining presses, where upper and lower dies simultaneously imprint the designs under immense pressure, achieving rates of up to 750 coins per minute per press. The striking method ensures precise edge lettering and raised rims for durability and security, with the entire operation to maintain consistency across denominations. Quality control is integrated throughout production, with automated systems performing real-time inspections for weight, diameter, thickness, and surface defects using vision technology and precision sensors. Blanks and struck coins are weighed to tolerances as fine as 0.1 grams, measured for exact dimensions matching specifications, and scanned for imperfections such as cracks or misalignments, resulting in rejection rates below 1% for substandard pieces that are melted down and recycled. This rigorous oversight, certified under ISO 9001 standards, ensures compliance with requirements and minimizes circulation of flawed coins. Annual production at the Winnipeg facility reaches capacities of up to 2 billion circulation coins, with typical volumes around 1 billion units to meet domestic demand and international contracts, equating to a daily output potential of 20 million coins. Finished coins are sorted, counted, and packaged into standard rolls—such as 50 nickels per roll—before being shipped via secure armored carriers to the and major financial institutions for distribution to branches nationwide. This process supports the steady supply of , with excess inventory stored in secure vaults to buffer against demand fluctuations.

Materials and Composition Changes

The composition of Canadian circulation coins has evolved significantly since , driven primarily by fluctuating metal prices, wartime resource demands, and efforts to reduce production costs while maintaining durability and environmental sustainability. Initially, higher-value denominations like the 10-cent dime and 25-cent quarter were struck in high-purity silver alloys to align with international standards and ensure intrinsic value. From to 1919, these coins contained 92.5% silver (sterling standard), balanced with for hardness. Rising silver prices in the early 1920s prompted a reduction to 80% silver for dimes, quarters, 50-cent halves, and silver dollars starting in 1920, with the remaining content ; this adjustment helped mitigate economic pressures without altering the coins' weight or size. The 5-cent coin underwent an earlier shift away from silver due to practical usability issues. Prior to 1922, it was also 92.5% silver but was made extremely small (15.5 mm or 1.55 cm diameter) to keep material costs proportional to its low , rendering it unpopular and difficult to handle. In 1922, the Royal Canadian Mint transitioned the 5-cent to nearly pure (99.9%), increasing its diameter to 21.2 mm for better while leveraging nickel's abundance and lower cost compared to silver at the time. This change marked the first widespread use of nickel in Canadian circulation coins, setting a precedent for adoption in lower denominations. By the mid-20th century, escalating silver costs led to the complete elimination of silver from circulation coins. In , as part of Canada's celebrations, dimes and quarters were produced in both 80% and 50% silver to stretch supplies amid global market surges, while silver dollars remained at 80% silver; full conversion to alloys occurred by 1968: 99.9% for dimes, quarters, and the new 1-dollar "" (introduced in 1987). The 5-cent remained -based, though wartime needs during temporarily substituted (88% , 12% zinc) from 1942 to 1945 to conserve for military use. The 2-dollar "," launched in 1996, featured a bimetallic design with a pure core surrounded by a ring (92% , 6% aluminum, 2% ) for security and cost efficiency. In the , compositions shifted toward multi-ply plated to address rising prices, environmental impacts from , and compatibility. Starting in 2000, the 5-cent adopted 94.5% , 3.5% , and 2% plating, while 10-cent and 25-cent coins used similar bases: 92% , 5.5% , 2.5% for dimes and 94% , 3.8% , 2.2% for quarters. The transitioned in 2012 to multi-ply brass-plated with a core and bronze plating (88% , 12% tin). The followed suit the same year, with a multi-ply -plated ring (94% , 4.5% , 1.5% ) encasing a brass-plated aluminum bronze insert (88.5% , 6% , 3.8% aluminum, 1.7% tin). These -based reduce material costs by up to 25% and lower environmental footprints by minimizing extraction, as part of the Royal Canadian Mint's ongoing recovery program that recycles older coins. No silver traces remain in current circulation coins, with all changes emphasizing durability, recyclability, and economic viability.

Historical Overview

Colonial and Pre-Confederation Coins

In during the 17th and 18th centuries, coinage was scarce due to the colony's reliance on the fur trade and limited specie shipments from , leading to the circulation of low-value tokens for everyday transactions. The sou marque, a billon double sou valued at 24 deniers, was introduced in 1739 under and marked with a distinctive lozenge or symbol to designate it for colonial use, preventing its redemption in ; these pieces, struck at various French mints like (X mintmark), weighed approximately 1.5 grams and featured the king's profile on the obverse with a crowned shield on the reverse. Complementing these were copper-based double sous tokens, valued at 24 deniers, issued from the 1730s onward to address small change needs amid ongoing shortages, as foreign coins like Spanish reales were frequently countermarked with fleur-de-lys for local valuation under 1681 edicts. These tokens circulated alongside money introduced in 1685 by Jacques de Meulles, which served as emergency paper currency until 1717, highlighting the improvised nature of monetary systems in the colony. Following the British conquest in 1763, the colonies of continued to face currency fragmentation, with no centralized mint and heavy dependence on imported coins. The Halifax rating, established around 1758 in , standardized the Spanish silver dollar at 5 shillings (60 pence) Halifax currency, facilitating trade across the region and influencing valuations in after 1777, , and ; this system rated British sterling at a premium but did not involve unique coin production, instead applying to circulating silver shillings and foreign pieces like Portuguese joes and French louis d'or. In during the early , copper halfpenny tokens—often merchant-issued, such as the 1831 "Ships, Colonies & Commerce" series struck in Birmingham—weighed about 5-6 grams and depicted sailing ships to promote maritime trade, addressing the absence of official small denomination coins until provincial notes supplemented them in 1790. These coppers, valued at 1/48 of a Halifax pound, circulated amid and foreign coin use, underscoring the colonies' economic isolation. Provincial authorities and banks issued to mitigate shortages in the mid-19th century, particularly in the Canadas and Maritime provinces. The Bank of , chartered in 1821, received authorization in 1850 to produce tokens, issuing halfpennies and pennies from 1850 to 1857; these featured St. George slaying the dragon on the obverse—modeled after British designs—and the provincial arms on the reverse, with weights around 4.5 grams for halfpennies and 9 grams for pennies, intended as 1/480 and 1/240 of a pound respectively. In , the government ordered halfpennies in 1843 and again in 1853 from the Heaton mint in Birmingham, with the latter series depicting a crowned "NB" and valued at 1/96 of a pound, totaling about 250,000 pieces to support local commerce. similarly issued halfpenny tokens, including the 1820 "Success" type showing a ship under sail, struck in and weighing 5.7-6.0 grams, as and provincial efforts to provide change amid fluctuating foreign inflows. These issues, often private or semi-official, reflected regional autonomy but varied in quality and acceptance. The absence of a unified coinage system persisted until the , with British North American colonies relying extensively on foreign coins—such as U.S. silver dimes and quarters, British sovereigns, and worn Spanish dollars—for up to 90% of transactions, leading to valuation discrepancies and economic inefficiencies like the "silver nuisance" where U.S. pieces traded below . This patchwork, compounded by differing provincial ratings (e.g., Halifax vs. currency), prompted reforms; the Province of Canada's 1857 mandated dollar-and-cents accounting effective , 1858, culminating in the issuance of the first decimal coins that year, marking the transition toward standardized federal coinage post-Confederation.

Queen Victoria Era (1870–1901)

Following Confederation in 1867, the Dominion of established its own unified currency system, culminating in the Coinage Act of 1870, which authorized the production of the nation's first official decimal coinage based on the dollar unit, modeled after the system to facilitate trade across the border. This legislation empowered the government to issue coins struck at the Royal Mint in , replacing the patchwork of colonial , British coins, and U.S. silver that had previously circulated, often at fluctuating values. The act specified that silver coins would be up to $10, aiming to standardize transactions and reduce the "silver nuisance" caused by undervalued foreign silver in Canadian commerce. By 1870, the first silver denominations—5¢, 10¢, 25¢, and 50¢—entered circulation, with the bronze 1¢ following in 1876 to complete the set of low-value coins needed for everyday use. The designs of these early coins reflected both imperial loyalty and emerging . The obverse featured effigies of created by engraver Leonard Charles Wyon: the "young head" portrait, depicting the queen facing left with a , was used from 1870 to 1888 on silver coins and from 1876 to 1886 on cents. In 1888, this transitioned to the older " head" effigy, showing Victoria with a veiled crown and more mature features, continuing through 1901; subtle varieties existed due to die changes, but the core elements remained consistent. Reverses emphasized national symbols, with silver denominations displaying a crowned wreath encircling the value and date, while the 1¢ featured a vine of 12 leaves around "1 CENT" and "." These motifs, struck in 92.5% silver for denominations of 5¢ and above (weighing 1.16 grams for 5¢ up to 11.66 grams for 50¢) and for the cent, underscored the shift to a distinctly Canadian standard while honoring the . Despite their role in stabilizing the , the high silver content of these coins made them vulnerable to economic pressures. During silver price spikes in the late , such as those tied to global market fluctuations around the , the intrinsic value often exceeded , prompting by individuals and melting by assayers to extract the metal. This led to shortages in circulation, particularly for smaller denominations, as coins were withdrawn from use when silver traded above the mint's fixed ratio to , exacerbating the challenges of a young nation's monetary system until composition adjustments in later eras.

King Edward VII Era (1902–1911)

The coinage of the Canadian dollar during King Edward VII's reign (1902–1910) preserved the established denominations of 1 cent, 5 cents, 10 cents, 25 cents, 50 cents, and 1 dollar, along with the reverse designs inherited from the Queen Victoria era, such as the leaves for the 1-cent coin and the crossed boughs for the 5-cent coin. The key update was to the obverse, which featured a new portrait of designed by British engraver G. W. de Saulles, depicting the king in a crowned bust facing right within a beaded circle, accompanied by the inscription "EDWARDVS VII DEI GRATIA REX IMPERATOR." Silver denominations (5 cents and above) maintained the 92.5% fine silver composition standard from the prior era, ensuring continuity in intrinsic value and weight specifications, while the 1-cent coin remained struck in 95% with 4% tin and 1% . Production occurred primarily at the Heaton Mint in Birmingham until the Ottawa branch of the Royal Mint opened in 1908, after which domestic minting increased efficiency for Canadian circulation. The brevity of Edward VII's reign resulted in comparatively modest mintages, with annual outputs often in the hundreds of thousands for most denominations, reflecting steady but limited demand in a period of economic stability following the Second Boer War's end in 1902. For instance, the total series mintage for the 50-cent coin across 1902–1910 was 1,990,758 pieces, while the 1-cent coin saw higher volumes exceeding 20 million in aggregate. This era's coinage experienced no significant material shortages, supporting consistent output amid Canada's growing post-war economy. In contemporary numismatic collections, coins remain relatively common for lower denominations like the 1 cent and 5 cents due to their higher original production and lighter circulation wear, but higher denominations such as the 50 cents and 1 dollar show lower survival rates from extensive use and periodic silver recycling during 20th-century price surges.

King George V Era (1911–1936)

The coinage of the Canadian dollar during the reign of King George V (1911–1936) transitioned from the designs of the previous era, introducing a new obverse effigy while retaining most reverse motifs to maintain continuity in circulation. The obverse featured a left-facing portrait of the king, designed by Australian-born sculptor Sir Bertram Mackennal, depicting George V in imperial robes with the inscription "GEORGIVS V DEI GRA: REX ET IND: IMP:" (George V, by the Grace of God, King and Emperor of the Indies). This effigy, first used on Canadian coins in 1911, appeared on denominations from the 1¢ to the 50¢, as well as the newly introduced silver dollar in 1935. Early 1911 issues, known as "godless" varieties, omitted "DEI GRA" from the inscription due to a transitional die error before the full design was implemented. Reverse designs remained largely unchanged from the Edward VII period, featuring iconic Canadian symbols such as the maple leaf wreath on higher denominations and the two maple leaves on the 1¢, ensuring familiarity for users. Material composition underwent significant adjustments amid economic pressures following , including a reduction in silver from 92.5% to 80% for dimes, quarters, 50¢ pieces, and dollars starting in to conserve resources. The 5¢ coin shifted from silver to pure in 1922, enlarging its size to 21 mm and with the reverse redesigned to feature two maple leaves, which improved durability and reduced costs. These changes reflected broader wartime and postwar fiscal constraints, with the 5¢ becoming a staple through the era. 1¢ coins continued unchanged at 95.5% with tin and alloys. Notable varieties emerged that highlight minting challenges and historical events. The 50¢ coin exists in two obverse subtypes: one with a small "0" in the date and finer details, and another with a larger "0," both prized by collectors for subtle die differences. Most famously, select 1936 issues across denominations (1¢, 10¢, 25¢, and 50¢) bear a small dot below the date, added to differentiate them from standard issues; these were produced in limited numbers as provisional coins for early 1937 circulation, necessitated by delays in preparing effigies for the anticipated reign amid the abdication crisis. Mintage for the 1936 dot varieties was extremely low, with only about 1,000–1,500 examples each, enhancing their numismatic value. Gold coinage saw restricted production during this period, with the Ottawa branch of the Royal Mint striking British-pattern sovereigns from 1911 to 1919 (except 1912 and 1915), valued at $10 in Canadian and featuring Mackennal's paired with Benedetto Pistrucci's St. George and dragon reverse. Additionally, official Canadian $5, $10, and $20 gold coins—90% pure with reverses—were issued briefly from 1912 to 1914, with mintages under 100,000 for the $10 denomination, before gold production halted due to wartime demands. These pieces circulated minimally, primarily as equivalents.

King George VI Era (1937–1952)

The coinage of Canada during the reign of King George VI, from 1937 to 1952, marked a period of significant adaptation amid economic challenges and global conflict. Upon George VI's ascension following the , the Royal Canadian Mint introduced a new obverse design featuring the king's left-facing effigy, created by British engraver Thomas Humphrey Paget. This indentured portrait, showing the king laureate and draped, replaced the previous designs and appeared on all denominations, emphasizing a more modern and regal aesthetic. Concurrently, the reverse of the five-cent coin underwent a notable change with the introduction of the iconic design by Canadian engraver George E. Kruger-Gray, depicting the animal on a rock amid a stream, symbolizing national industriousness. This motif debuted in 1937 alongside updated reverses for other denominations, such as the sprig for the one-cent and the caribou for the twenty-five-cent, reflecting a broader effort to incorporate distinctly Canadian symbols. World War II prompted innovative wartime measures to conserve strategic metals, particularly affecting the five-cent nickel. In 1942, the Mint shifted the five-cent coin to a twelve-sided (dodecagonal) shape to distinguish it from wartime one-cent coins made of similar materials, while retaining the beaver reverse. To support the war effort, the composition changed to —a zinc-copper alloy (88% copper, 12% zinc)—for 1942 and 1943 issues, followed by chrome-plated steel in 1944 and 1945. These "Victory nickels" featured a subtle "V" symbol in (dots and a dash) incorporated into the reverse design on the beaver's dam, denoting victory in ; only about 5.7 million were minted in 1943, making them a notable wartime variety. Silver denominations like the dime, quarter, and remained at 0.925 fine silver throughout the era, though production volumes fluctuated due to metal shortages. The postwar years brought further adjustments tied to geopolitical shifts. In 1947, India's independence from British rule necessitated the removal of "ET IND: IMP:" (Emperor of India) from the obverse legend, delaying production as new dies were prepared. To meet demand, the Mint struck 1947-dated silver coins (dimes, quarters, half dollars, and dollars) in early 1948 with a small symbol after the date to differentiate them from pre-independence issues; approximately 1.4 million such quarters were produced. These "" varieties bridged the transition without altering compositions. The era concluded in 1952, following the king's death, with the final issues including the twelve-sided five-cent , which reverted to pure composition postwar but retained its wartime shape until 1963.

Queen Elizabeth II Era (1953–2022)

The Queen Elizabeth II era marked a period of remarkable stability and innovation in Canadian coinage, spanning nearly seven decades from her accession in until her passing in 2022. During this time, the Royal Canadian Mint maintained consistent designs for standard denominations while introducing new coins to modernize the currency system, reflecting Canada's economic expansion and evolving monetary needs. Circulation coins featured the Queen's portrait on the obverse, with reverses depicting iconic Canadian symbols, and production scaled up significantly to meet growing demand. A key aspect of this era was the progression of effigies portraying Queen Elizabeth II, each update capturing her at different stages of life and designed by renowned artists. The first effigy, created by British sculptor Mary Gillick, depicted the young monarch in a and was used from 1953 to 1964, inscribed with " DEI GRATIA REGINA." This was succeeded in 1965 by Arnold Machin's more mature profile, showing the Queen without headwear and with the shortened legend " D G REGINA," remaining in use until 1989. In 1990, Canadian artist Dora de Pédery-Hunt introduced the first domestically designed effigy, portraying the Queen at age 64 with a jeweled crown and pearl necklace, which circulated until 2002. The final update came in 2003 with Susanna Blunt's effigy, again Canadian-designed, featuring a simpler draped portrait that persisted through 2022. Major innovations included the introduction of higher-denomination coins to replace paper notes and reduce costs. The $1 coin, nicknamed the "" for its reverse designed by Robert-Ralph Carmichael, was launched on June 30, 1987, as an 11-sided, gold-colored piece made of aureate bronze-plated . This was followed by the $2 coin, or "," introduced on February 19, 1996, featuring Brent Reid's design on its outer ring and an inner core of pure , adopting a bi-metallic construction for enhanced security. Design adjustments addressed practical circulation issues and counterfeiting threats. The 50-cent coin, while still minted, saw its general circulation decline sharply by the late due to low public demand, with the Mint ceasing distribution to banks around 1989 and limiting availability to rolls or sets. In 2012, to combat rising counterfeiting, the Mint added advanced security features to the loonie and , including a laser-etched micro-engraving above the and within the polar bear's ring, along with edge lettering and multi-ply plated steel composition for durability. Production volumes during this era reached unprecedented levels, underscoring Canada's economic growth and the Mint's efficiency. The Royal Canadian Mint struck billions of circulation coins annually in peak years, such as over 1.4 billion pieces in alone, with total mintages exceeding 50 billion across denominations from to ; for instance, more than 13 billion one-cent coins were produced to support everyday transactions. Materials remained consistent after the shift from silver alloys in to base metals like and , ensuring cost-effective output without altering core designs.

King Charles III Era (2023–present)

The coins of the Canadian dollar entered a new royal era following the accession of King Charles III on September 8, 2022, upon the death of Queen Elizabeth II. This marked the first change in the monarch's on Canadian circulation coins in 70 years, continuing the tradition of updating the obverse design to reflect the reigning sovereign while maintaining the established decimal currency system introduced in 1858. The new effigy, designed by Canadian artist Steven Rosati, was unveiled by the Royal Canadian Mint on November 14, 2023, at its Winnipeg facility, coinciding with the king's 75th birthday. The portrait depicts the king facing left, wearing a laurel wreath in profile, with the inscription "CHARLES III D·G·REX" and the Latin motto "F·D·" for "Fidei Defensor," integrated into a national floral border of maple leaves, shamrocks, thistles, and roses symbolizing Canada's ties to the Commonwealth realms. This effigy replaced the late queen's likeness across all circulating denominations from the 5-cent coin to the 2-dollar coin, with the first such coins entering general circulation in December 2023. In keeping with historical practice, the reverse designs of these coins remained unchanged, featuring iconic motifs such as the on the , the on the , and the on the , ensuring continuity in recognition and use. The production rollout began with 2023-dated coins, including special first-strike editions packaged in collector wraps and sets for numismatists, followed by full integration into 2024 and 2025 issues. No significant alterations to the metallic compositions—such as the nickel-copper alloys or plated —were introduced, preserving the coins' durability and anti-counterfeiting features amid the transition to the new obverse.

Numismatic Variants and Special Issues

Commemorative Coins

Commemorative coins of the Canadian dollar are non-circulating issues produced by the Royal Canadian Mint (RCM) to honor significant national events, historical anniversaries, cultural themes, and milestones. These coins, often crafted in precious metals such as 99.99% pure silver or , feature specialized designs, finishes, and packaging that distinguish them from standard circulation pieces. Unlike everyday currency, they are minted in limited quantities to appeal to collectors and investors, emphasizing artistic and thematic elements over practical use. The RCM issues various types of commemorative coins, including proof sets with high-relief strikes and mirror-like finishes, colored enamel or holographic enhancements for visual appeal, and multi-coin themed series that explore narratives like , indigenous heritage, or royal history. For instance, the 2010 Olympic Winter Games series included collector editions such as proof coins depicting winter sports like ice and , available in denominations such as $5 and $25, with limited mintages under 50,000 for premium variants. Similarly, the 1992 125th Anniversary of series featured proof sets with 13 coins, including provincial and a $1 piece showing children with the Canadian flag on , struck to celebrate Canada's founding provinces and territories. These series often incorporate innovative techniques, such as selective or glow-in-the-dark elements, to enhance collectible value. As of 2025, the RCM continues to release series on themes like and heritage. Denominations for these coins typically range from $1 to $25, though higher values like $200 exist for larger gold issues, with compositions prioritizing silver (1 oz or multi-ounce) and (from 1/20 oz to 1 oz). The 2023 series marking His Majesty King Charles III's exemplified this, including a $5 matte proof silver coin with the royal cypher (produced while supplies last), a 1/20 oz pure (mintage of 6,500), and a $10 pure gold piece, all presented in commemorative . Limited mintages ensure exclusivity; for example, the 2024 anniversary proof silver dollar for the had a cap of 15,000 coins. Distribution occurs exclusively through the RCM's online shop, authorized dealers, and select retailers, with prices reflecting collector premiums—often 2-5 times —rather than circulation. In recent years, the RCM has continued this with sets incorporating the new of King Charles III, designed by Steven Rosati. The 2025 Special Wrap Roll Collection: First Strikes comprises five rolls—one each of $2, $1, 25¢, 10¢, and 5¢ coins—featuring first-strike examples with the portrait, limited to 7,000 sets worldwide to mark the ongoing transition to the new royal likeness. These items, sealed in premium packaging, highlight the Mint's focus on numismatic innovation while tying into broader themes of and heritage.

Error Coins and Varieties

Error coins and varieties in Canadian dollar coinage encompass unintentional production anomalies and die differences that distinguish certain pieces from standard issues, often enhancing their collectible value due to scarcity and historical context. These include striking errors, planchet flaws, and transitional designs resulting from minting processes at the Royal Canadian Mint. While most errors occur sporadically during high-volume production, varieties arise from die preparations or material changes, with identification relying on professional grading services like the Professional Coin Grading Service (PCGS) and the Independent Coin Graders and Counters (ICCS). Common mint errors involve deviations in the striking process or materials. Double strikes happen when a is struck multiple times without being ejected from the collar, resulting in offset or ghostly images superimposed on the primary design; such errors are visually striking and valued based on the degree of misalignment. Off-center minting occurs if the shifts during striking, leaving portions of the design missing or incomplete, with the rarity increasing as the offset exceeds 50 percent. Wrong planchet errors, where a is struck on a blank intended for another denomination or composition, are particularly sought after; for example, a 1979 1-cent struck on a 10-cent silver weighs about 2.3 grams instead of 3.24 grams and displays the dime's larger . Notable varieties include the 1936 dot dimes and , created as transitional pieces amid the abdication crisis of King Edward VIII. With King George V's death in January 1936 and Edward's unexpected in December, the Royal Canadian Mint added a tiny dot beneath the date on existing dies to signify coins struck in 1937 for circulation in that year; approximately 191,237 1936 dot dimes and 153,322 were produced, making the dime less rare than the quarter but far more common than the three known 1936 dot cents. Another infamous case is the purported 1955 branched 50-cent piece, initially circulated as a rare die variety showing an extra branch on the reverse , but later debunked as an altered coin through expert examination revealing tool marks inconsistent with mint production. Rarity in Canadian error coins and varieties often stems from low production numbers or post-mint destruction. The 1921 50-cent piece, with an official mintage of 2,000 but estimates of fewer than 100 surviving in all grades due to wartime silver reclamation, exemplifies this as the "King of Canadian Coins," with a PCGS MS-63 example fetching $120,000 at in 2019. Similarly, the 1921 5-cent , minted in silver with only about 460 known survivors after most were melted under the shifting to nickel composition, has realized over $100,000 in high-grade sales, such as a MS-65 specimen highlighted in recent numismatic auctions. The deliberate Victory nickel variety from the King era, featuring a "V" on the reverse to combat counterfeiting during , adds a planned anomaly that collectors prize for its historical tie to wartime efforts. Detection and authentication of these pieces typically involve to assess die states, weight measurements for errors, and professional grading by PCGS or ICCS, which attribute varieties and verify authenticity against known populations; for instance, ICCS tracks over 1,000 submissions annually, emphasizing the importance of certified slabs for market confidence.

Cultural and Collectible Aspects

Effigies and Portrait Evolution

The effigies on Canadian coins have traditionally featured profile portraits of the reigning British on the obverse, symbolizing the continuity of sovereignty and Canada's ties to . This practice began with the first decimal coins in 1870, evolving through artistic styles that reflected both British numismatic traditions and Canadian adaptations. The portraits generally adhere to a longstanding convention where each faces the opposite direction of their immediate predecessor, alternating left and right to distinguish reigns, though early designs occasionally varied based on the artist's interpretation. Inscriptions surrounding are in Latin, incorporating abbreviations like "D·G·" for Dei Gratia (), "REX" or "REGINA" for or queen, and additional titles such as "ET IND:IMP" (and ) until its removal in 1948 following India's independence. From 1937 onward, while obverse inscriptions remained in Latin or transitioned to English, reverse designs incorporated bilingual English and French text to reflect Canada's linguistic duality. The effigy of Queen Victoria, introduced in 1870, was designed by British engraver Leonard Charles Wyon and depicted a mature, veiled profile facing left, known as the "Old Head" or veiled bust style. This portrait, adapted from Wyon's work on British coinage, emphasized Victoria's enduring reign and imperial stature, with the inscription "VICTORIA D·G·REGINA CANADA" encircling the image. Earlier provincial issues from the 1850s had used Wyon's "Young Head" facing left or "Jubilee Head" facing right, but the 1870 federal coins standardized the veiled design for consistency across denominations like the 5-cent, 10-cent, 25-cent, and 50-cent pieces. The style marked a shift from simpler profile techniques to more detailed engraving, incorporating subtle indentures for depth and realism in the veil and facial features. For King Edward VII's reign from 1902 to 1911, the effigy was crafted by engraver George William de Saulles, showing a bare-headed profile facing right, opposite to Victoria's direction. De Saulles' design, with its clean lines and elements in the inscription "EDWARDVS VII D·G·REX IMP·," drew from his experience at the Royal Mint and emphasized the king's dignified posture. This portrait represented a modernizing evolution, using refined indentation techniques to capture texture in the hair and clothing, and was used uniformly on silver coins until Edward's death. King George V's effigies, spanning 1911 to 1936, underwent stylistic changes, beginning with Sir E.B. MacKennal's crowned bust facing left in 1911, which included the controversial "Godless" variety omitting "DEI GRATIA" due to secular pressures. Later issues from 1930 onward featured Percy Metcalfe's more simplified crowned profile facing left, with inscription "GEORGIVS V D·G·REX ET IND:IMP: ," showcasing Metcalfe's modernist approach to reduce detail for mass production while maintaining symbolic regality. Metcalfe's design, influenced by his work on coins, introduced smoother contours and less ornate indentures, adapting to wartime economies and reflecting evolving technologies. The portrait of King George VI, used from 1937 to 1952 and designed by Thomas Humphrey Paget, depicted an uncrowned bust facing left, aligning with wartime by omitting regal headwear. Paget's , inscribed initially as "GEORGIVS VI D·G·REX ET IND:IMP:" and revised to "GEORGIVS VI D·G·REX" after 1947, employed precise indentation for facial contours to convey resolve and approachability. This design broke from crowned traditions, prioritizing simplicity and was the first to appear on coins struck at the newly operational in . Queen Elizabeth II's reign saw multiple effigy updates, reflecting her long tenure and artistic innovation. The initial 1953–1964 portrait by Mary Gillick showed a laureate head facing right, inscribed "ELIZABETH II DEI GRATIA REGINA," with delicate indentures highlighting youthful elegance. From 1965 to 1989, Arnold Machin's tiara-adorned profile facing right modernized the design with bolder lines for durability in circulation. In 1990–2002, Canadian artist Dora de Pédery-Hunt introduced an older, jeweled effigy facing right, the first by a Canadian-born designer, emphasizing national identity through intricate detailing of the diadem and necklace. The final iteration, from 2003 to 2022 by Susanna Blunt, featured an uncrowned, mature profile facing right with inscription "ELIZABETH II D G REGINA," using advanced techniques for subtle shading and realism. These changes not only updated the monarch's image over decades but also incorporated Canadian artistic contributions, transitioning from British-dominated engraving to local expertise. The effigy of King Charles III, introduced in 2023 and designed by Canadian artist Steven Rosati, depicts a suited profile facing left, opposite to Elizabeth II's direction, with inscription "CHARLES III D G REX." Rosati's contemporary style, selected from 350 submissions and approved by the Palace, uses refined digital-assisted for sharp details in the and collar, marking the first fully Canadian-designed royal portrait in circulation. This evolution underscores a blend of tradition and modernity, with portraits serving as enduring emblems of and national heritage.

Mint Marks and Rarity Indicators

Mint marks on Canadian coins serve as identifiers for the facility where the coin was produced, aiding numismatists in authentication and valuation. Historically, these marks were introduced to distinguish coins struck under contract at foreign mints from those produced domestically, with usage evolving as the expanded its operations. While most circulation coins lack mint marks, their presence often signals limited production runs or special circumstances, influencing rarity and market desirability. The "H" mint mark denotes coins struck at the Heaton Mint in Birmingham, England, which produced Canadian denominations from 1876 to 1907 under contract with the British Royal Mint. This small letter "H" appears below the date on the obverse for cents and higher denominations, distinguishing them from unmarked Ottawa productions after 1908. For instance, the 1882-H large cent exemplifies this practice, with its mintage reflecting Heaton's role in supplementing Canadian output during early decimalization. Following the opening of the branch in 1908, a "C" was used exclusively on produced there from 1908 to 1919, positioned above the date to signify Canadian origin amid global sovereign production. Circulation silver and coins from bore no marks until the mid-20th century, as it became the primary facility. In modern times, the "P" was added below the date on circulation coins from 2001 to 2012, indicating multi-ply plated steel composition introduced to replace copper-based alloys. This mark, visible on cents, nickels, dimes, quarters, and 50-cent pieces, helped track the technological shift but was discontinued after full adoption. From 2006 onward, the logo—a stylized over "M" flanked by a —serves as a promotional on select circulation and collector issues, often placed below the monarch's to highlight production quality. The "W" mint mark identifies coins struck at the Winnipeg facility, operational since 1976 but rarely used for circulation until recent collector series; it first appeared on numismatic products like the 2019 burnished Silver Maple Leaf, positioned near the rim. Winnipeg issues remain scarce in circulation, enhancing their appeal, as most standard coins originate from Ottawa. A notable example of a privy mark—a small symbolic addition distinct from standard mint marks—is a small maple leaf privy mark on the 1948 silver dollar commemorating Newfoundland's entry into Confederation, adding to the coin's historical context without altering core production indicators. Rarity implications arise from mint-specific output volumes and historical context; for example, Heaton "H" coins from low-mintage years like cents command premiums due to their foreign origin and survival rates, while unmarked coins dominate circulation but lack the variety premium. Winnipeg "W" marks on modern pieces, limited to under 10,000 for many releases, significantly boost values compared to unmarked counterparts. Identification involves examining placement—typically obverse near the date or effigy foot—and magnification for subtle symbols, with professional grading by services like PCGS or NGC factoring marks into overall condition and authenticity assessments. These indicators directly impact collectible value, as marked varieties often fetch 20-50% more in auctions depending on preservation.

Notable Records and Legends

One of the most notable auction records for Canadian coins is the 1911 silver dollar, which fetched $552,000 at a sale in 2019, highlighting its status as one of only three known proof examples produced as test strikes before regular production was halted. This coin's extreme rarity stems from the Royal Canadian Mint's decision to melt most prepared planchets after production delays, making surviving specimens highly sought after by collectors. Another significant record involves the 1936 dot cent, which sold for $446,600 CAD in 2021, underscoring the premium placed on transitional issues from the King era. Regarding hoards, the "Canada Hoard" represents one of the largest discoveries of early Canadian gold coins, consisting of thousands of 1912–1914 $5 and $10 gold coins struck from Klondike gold and stored in bank vaults for nearly a century before being released for sale in the early 2000s. These coins, totaling over 8,000 pieces originally minted, were preserved due to economic policies and later sold to balance government budgets, providing collectors with access to pristine examples of Canada's first gold coinage. While large-scale hoards of wartime-era small denomination coins like the 1944 bronze pennies are less documented, rare steel error varieties from that year—struck accidentally on planchets intended for other denominations—occasionally surface in smaller collections, valued for their wartime context and scarcity. Persistent legends surround certain Canadian coins, particularly the 1936 dot series (cent, nickel, dime, and quarter), often mythologized as "" due to their production amid King Edward VIII's unexpected in 1936, which halted the use of his and led to the addition of dots below the date as a stopgap measure. This narrative has fueled speculative value, with collectors attributing enhanced rarity and historical intrigue to the dots, though only about 30 to 40 examples of each denomination are known to exist, driving prices into the hundreds of thousands. Another debunked rumor involves "ghost" 1965 silver quarters, a tale suggesting hidden high-silver content or error strikes persisting after the shift to reduced silver alloys, but all 1965 Canadian quarters were standard 80% silver composition with no verified "" variants beyond minor die varieties. Culturally, the Victory nickel (1943–1945) emerged as a powerful WWII morale symbol, featuring a prominent "V" on the reverse—inspired by Winston Churchill's "V for Victory" hand gesture—and a subtle inscription along the rim reading "WE WIN WHEN WE WORK WILLINGLY" to encourage home-front production efforts. Minted in steel to conserve nickel for the war, over 81 million were produced in 1944 alone, becoming emblems of resilience that collectors still prize for their patriotic design. Urban legends of buried pirate coins persist in Canadian colonial history, most famously tied to in , where tales since the describe a "money pit" concealing pirate treasure—possibly Captain Kidd's hoard—including gold and silver coins from the 17th and 18th centuries, though excavations have yielded only artifacts and no confirmed bounty. In modern context, the first coins bearing King Charles III's effigy, released in 2023, have become instant collectibles, with uncirculated sets commanding premiums up to double their face value due to limited mintages and the historic transition from Queen Elizabeth II's portrait. For instance, the 2023 circulating and quarters featuring the new effigy saw rapid sell-outs in proof and specimen finishes, appealing to numismatists eager to mark the start of a new monarchical era in Canadian coinage.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.