Hubbry Logo
DowelDowelMain
Open search
Dowel
Community hub
Dowel
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Dowel
Dowel
Dowel
View on Wikipedia
from Wikipedia
Wooden dowel pins

The dowel is a cylindrical shape made of wood, plastic, or metal. In its original manufactured form, a dowel is long and called a dowel rod, which are often cut into shorter dowel pins.[citation needed] Dowels are commonly used as structural reinforcements in cabinet making and in numerous other applications, including:

Wood dowel

[edit]
See also: Treenail

Manufacturing process

[edit]
A dowel plate

The traditional tool for making dowels is a dowel plate, an iron (or better, hardened tool steel) plate with a hole having the size of the desired dowel. To make a dowel, a piece of wood is split or whittled to a size slightly bigger than desired and then driven through the hole in the dowel plate. The sharp edges of the hole shear off the excess wood.[1][2][3]

A second approach to cutting dowels is to rotate a piece of oversized stock past a fixed knife, or alternatively, to rotate the knife around the stock. Machines based on this principle emerged in the 19th century.[4][5] Frequently, these are small bench-mounted tools.[6][7]

For modest manufacturing volumes, wood dowels are typically manufactured on industrial dowel machines based on the same principles as the rotary cutters described above. Such machines may employ interchangeable cutting heads of varying diameters, thus enabling the machines to be quickly changed to manufacture different dowel diameters. Typically, the mechanism is open-ended, with material guides at the machine's entry and exit to enable fabrication of continuous dowel rods of unlimited length. Since the 19th century, some of these dowel machines have had power feed mechanisms to move the stock past the cutting mechanism.[8][9]

Application

[edit]

When dowels are glued into blind holes, a very common case in dowel-based joinery, there must be a path for air and excess glue to escape when the dowel is pressed into place. If no provision is made to relieve the hydraulic pressure of air and glue, hammering the dowel home or clamping the joint can split the wood. An old solution to this problem is to plane a flat on the side of the dowel; some sources suggest planing the flat on the rough stock before the final shaping of the round dowel.[2] Some dowel plates solve the problem by cutting a groove in the side of the dowel as it is forced through; this is done by a groove screw, a pointed screw intruding from the side into the dowel cutting opening.[3]

When two pieces of wood are to be joined by dowels embedded in blind holes, there are numerous methods for aligning the holes. For example, pieces of shot may be placed between the wood pieces to produce indentations when the pieces are clamped together; after the clamp is released, the indentations indicate the center points for drilling.[1]

History

[edit]
Hand cut 8" dowel, c1840

The word dowel was used in Middle English; it appears in Wycliffe's Bible translation (circa 1382–1395) in a list of the parts of a wheel: "...and the spokis, and dowlis of tho wheelis..."[10]

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Dowel

View on Grokipedia
from Grokipedia
A dowel is a cylindrical rod or pin, typically made from , , , or composite materials, used to reinforce and align joints in , furniture assembly, and projects. In , wooden dowels—often crafted from hardwoods like , , or —are the most common variant, providing strong, invisible connections for items such as chairs, tables, cabinets, shelving, and staircases by being inserted into drilled holes with glue. Metal dowels, such as or epoxy-coated , offer superior strength and resistance for heavy-duty applications, while or glass fiber-reinforced types suit moisture-prone or lightweight industrial uses. Dowels enhance by allowing horizontal movement while restricting vertical shear, preventing cracks in materials like slabs and fortifying foundations in . Their advantages include precise alignment, aesthetic appeal due to hidden fasteners, and durability over alternatives like screws in many joinery tasks, a technique dating back centuries in .

Definition and Materials

Definition and Purpose

A dowel is a cylindrical rod, typically made from , , or , that is inserted into precisely drilled corresponding holes in two or more pieces of material to align them accurately and strengthen the resulting without the use of visible fasteners. This design allows for a seamless connection where the dowel acts as an internal pin, promoting structural while maintaining aesthetic appeal in applications ranging from to mechanical assemblies. The primary purposes of a dowel include providing precise alignment for the mating of parts, ensuring even distribution of shear loads across the , serving as a pivot or in simple mechanisms, and enhancing overall stability in load-bearing structures. By inserting the dowel into pre-drilled holes, it facilitates accurate positioning during assembly, which is critical for maintaining tolerances in . In load-bearing scenarios, dowels help transfer forces effectively, preventing misalignment and supporting the against applied stresses. Mechanically, dowels function through a friction or interference fit that secures them within the holes, allowing them to transfer forces without additional hardware. This fit enables the dowel to resist shear forces perpendicular to its axis by distributing loads evenly along its length, thereby minimizing stress concentrations in the connected materials. Dowels excel over alternatives like screws or nails by creating hidden joints that avoid surface penetrations, and reducing material weakening since they do not require pilot holes or threading that could split or damage the substrate.

Common Materials

Dowels are primarily manufactured from , metal, and or composite materials, with alternatives such as and used in specialized applications. Wooden dowels, the most traditional type, are often made from hardwoods like for enhanced strength or softwoods like for cost-effectiveness. Metal dowels commonly include for high-load scenarios and aluminum for lightweight options with corrosion resistance. dowels, such as those from or PVC, provide non-conductive and low-friction properties suitable for electrical or sliding applications. Wooden dowels benefit from the natural structure, which offers and excellent , allowing them to conform slightly under load while maintaining joint integrity; for instance, exhibits parallel-to-grain around 46-51 MPa. Metal dowels provide superior tensile strength and resistance, with dowels achieving yield strengths of approximately 170,000 psi (1,170 MPa) and shear strengths of 130,000 psi. Plastic dowels demonstrate chemical inertness and elasticity, with featuring a modulus of elasticity typically between 2-4 GPa, enabling flexibility without permanent deformation. Material selection for dowels depends on load requirements, environmental exposure, cost, and compatibility with adjoining materials. High-load applications favor or for their strength, while corrosive environments necessitate treated wood, , or plastics to resist moisture or chemicals. Cost considerations often lead to softwoods or aluminum over premium alloys, and compatibility avoids issues like in mixed-metal assemblies. Dowels adhere to standards for sizes and tolerances to ensure precise fit and performance, with diameters ranging from 1/8 inch (3 mm) to 1 inch (25 mm) common across materials. For metallic dowels, ISO 2338 specifies tolerances such as m6 for interference fits (diameter variation of -0.006 to 0 mm for sizes up to 10 mm) and h8 for slip fits.

Production Methods

Wooden Dowel Manufacturing

Wooden dowel manufacturing begins with the selection of high-quality, straight-grained hardwood lumber, primarily sourced from species like birch and maple, which provide the necessary strength and uniformity due to their dense, even grain structure. These materials are typically obtained from regions such as the Appalachian hardwoods in the United States, where logs are milled into cants and then sawn into boards at sawmills. The lumber undergoes initial grading to reject defects like knots or irregular grain, followed by cutting into rough blanks slightly larger than the final dimensions using rip saws and planers to ensure consistent width and thickness. Storage in dry sheds precedes drying, where the wood's moisture content is reduced to 6-10% through air drying or kiln drying at temperatures ranging from 140-180°F to prevent warping and enhance stability. Shaping transforms these blanks into precise cylindrical rods using specialized industrial dowel machines, which differ from traditional turning by employing a hollow with inward-protruding cutting knives to shave the wood as it advances through the device. The process starts with trimming the blanks to approximate length via trim saws, after which they are fed into the dowel machines to achieve smooth, uniform diameters, such as the standard 3/8 inch, with tolerances as tight as ±0.005 inches. While may be used for custom or smaller-scale production to rotate and carve squares into rounds, industrial operations prioritize high-speed dowel mills for efficiency, producing straight rods without the need for steam bending, which is reserved for curved applications. Finishing involves sanding the rods to remove any surface imperfections and achieve a smooth texture suitable for , followed by final length cutting to specifications like 36 inches with ±1/16 inch tolerance. The dried dowels, now at 6-10% moisture content, may receive optional coatings such as to improve during insertion, though many remain untreated for natural compatibility with wood glues. Quality control is rigorous throughout, with hand inspections for straightness—typically allowing no more than 1% bowing over the rod's length (e.g., less than 0.36 inches deviation over 36 inches)—and defects such as knots, splits, or marks. Only rods meeting these standards, including diameter uniformity and absence of visible flaws, are graded as premium and packaged for distribution. Production scales vary significantly: artisanal handcrafting on lathes allows for custom sizes and small batches tailored to specific needs, whereas industrial facilities using automated dowel machines can yield millions of units annually to meet widespread demand in furniture and .

Non-Wooden Dowel Production

Non-wooden dowels, primarily made from metals, plastics, and composites, are produced using that emphasize precision, scalability, and material-specific properties, differing markedly from the organic shaping techniques used for wooden variants. Metal dowel production typically begins with or from metal billets to form the initial rod stock, followed by cold heading for pins to shape the ends without , which work-hardens the for enhanced strength. Subsequent steps include threading or on the surface to improve grip in assemblies, and via and tempering to achieve a core hardness of Rockwell C 47-58 and a minimum case hardness of Rockwell C 60 for standard pins, per ASME B18.8.2, ensuring durability under load. Plastic and composite dowels are fabricated through injection molding for complex, precise shapes, such as dowels with tolerances as tight as ±0.001 inch, allowing for high accuracy in alignment applications. is employed for producing uniform rods from polymers, which are then cut to length, while composites like glass-filled polymers incorporate fiber reinforcement during molding to boost tensile strength and stiffness. Finishing processes for these dowels include or on metals to provide , tumbling on plastics to deburr and smooth surfaces, and precision grinding to refine diameters to exact specifications. Specialized techniques such as CNC machining enable customization from alloys for unique requirements, while facilitates of composite dowels. These methods support high-volume output, with metal drawing processes capable of high rates in automated lines, optimizing efficiency for industrial demands.

Applications

In Woodworking and Joinery

In woodworking and joinery, dowels serve as a fundamental method for creating strong, invisible connections between wood pieces, particularly in furniture making and cabinetry. This technique involves precisely aligning and inserting cylindrical wooden pins into drilled holes to reinforce joints, offering both structural integrity and aesthetic appeal without visible fasteners. Dowel joinery is favored for its simplicity and efficiency, allowing craftsmen to assemble components like tabletops, frames, and cabinet doors with professional results. The primary joinery techniques emphasize accuracy in placement and assembly. Woodworkers drill aligned s using dowel jigs, which ensure 90-degree perpendicularity and consistent spacing to prevent misalignment. For permanent bonds, glue is applied to the dowel and surfaces before insertion, followed by the pieces together and clamping for at least one hour to allow curing; alternatively, dry dowels can be used solely for alignment during glue-ups of other joints. Fluted or grooved dowels are often preferred in these applications, as their ridges enhance glue adhesion by increasing surface area and facilitating even distribution, reducing the risk of weak bonds. Dowel joinery finds specific applications in edge-to-edge joints for stable tabletops, where multiple dowels prevent board separation under stress; corner reinforcements in picture frames or box constructions, providing rigidity without altering the visible miter; and mitered joints in moldings or trim, where dowels secure angled pieces invisibly. These uses are common in for drawer fronts and shelving, as well as furniture like chairs and tables, where the joints must withstand daily handling. In modern woodworking applications, particularly two-sided CNC router projects, precision-ground metal dowel pins are commonly used as registration and alignment pins to ensure accurate repositioning of the workpiece when it is flipped for machining both sides. These pins are typically made of hardened steel or stainless steel, with 1/4-inch diameter being common, and are ground to tight tolerances (often ±0.0001 inches or better). This high precision helps achieve exact alignment. Generally, two pins are used to control both position and rotation. Wooden dowels are generally not recommended for such alignment purposes due to variability in dimensions, potential swelling from moisture exposure, and lower overall precision. High-precision metal dowel pins are available from suppliers such as McMaster-Carr. Essential tools and accessories streamline the process and ensure precision. Dowel centers, small metal pins inserted into predrilled holes, mark corresponding locations on mating pieces by creating indentations when pressed together, eliminating guesswork in alignment. Specialized brad-point drill bits are recommended for clean entry and minimal tear-out, producing flat-bottomed holes that match dowel diameters exactly. Sizing follows established guidelines, such as selecting dowel diameters approximately one-third the thickness of the stock—for instance, 1/4-inch dowels for 3/4-inch boards—to maintain integrity; dowel lengths are typically chosen to penetrate each piece by at least the dowel's diameter, often following a rule where total length approximates one-third to one-half the board thickness per side for optimal embedment. Dowel joints offer key advantages in , including aesthetic invisibility since the pins remain hidden after assembly, preserving the clean lines of fine furniture. Their strength is comparable to traditional mortise-and-tenon joints, with tests on solid showing dowel joints failing at around 650 pounds of versus 500 pounds for mortise-and-tenon, providing reliable shear resistance suitable for load-bearing elements. This makes them ideal for both and projects where rivals more complex methods but with faster execution. Common pitfalls can compromise joint quality if not addressed. Over-drilling holes deeper than necessary weakens the surrounding wood fibers, reducing overall holding power, while misalignment from improper setup or loose clamps leads to gaps and stress concentrations. Additionally, using undersized or oversized dowels results in loose fits or splitting, respectively, underscoring the need for precise measurement and quality materials.

In Construction and Engineering

In construction and engineering, dowels serve critical roles in ensuring structural integrity, load transfer, and precise alignment under high-stress conditions. Unlike their applications in woodworking, dowels here are engineered for load-bearing capacities in buildings, bridges, and machinery, often complying with rigorous codes to withstand shear, tension, and environmental forces. Rebar dowels, typically made from deformed bars, are embedded in to provide continuity and anchorage across joints or sections. These dowels transfer tensile and shear forces while preventing crack propagation, with hooked ends—such as 90° or 180° bends—enhancing anchorage by increasing development and resistance to pullout, as specified in ACI 318 provisions for reinforcing bar detailing. In - composite structures, dowels function as shear connectors to promote composite action between the beam and , enabling efficient load sharing; composite dowels, formed by perforating the web, offer higher shear resistance than traditional headed studs, with experimental studies showing increased ultimate shear capacities in prefabricated bridge girders. In , precision dowels are essential for aligning machine components and fixtures, ensuring repeatability and minimizing tolerances in assemblies. A common configuration involves two-dowel systems: one dowel with a slip fit (clearance of 0.0005–0.001 inches) for easy insertion and adjustment, and the other with an (0.0001–0.0003 inches) to resist rotation and maintain positional accuracy under operational loads. These fits are critical in high-precision applications like turbine housings or robotic arms, where misalignment can lead to vibration or failure. In electronics manufacturing, precision steel dowel pins with h6 tolerance or similar, typically 15-20 mm in length, are used for positioning double-sided printed circuit boards (PCBs) on CNC machines. These pins are paired with holes in a sacrificial bed or holders for secure fixation, ensuring accurate alignment during milling or drilling processes on both sides. Installation methods vary by material and context to achieve secure embedding without compromising performance. For concrete applications, epoxy grouting involves holes into existing substrates, injecting high-strength resin, and inserting dowels to bond them chemically, providing resistance and load transfer in seismic retrofits or wall extensions; this method ensures high pullout strengths in installations. In metal assemblies, press-fitting uses hydraulic or manual presses to drive dowels into reamed holes, creating a lock that withstands dynamic loads without adhesives. Dowel spacing is calculated based on load demands, often placed at 12-inch centers in walls to distribute shear evenly and maintain structural continuity during pours or expansions. Advanced implementations include expansion dowels in bridge construction, where sleeved or capped dowel bars allow longitudinal movement due to —up to 2 inches in long spans—while transferring vertical loads across joints, preventing differential settlement and . In aerospace, dowels made from lightweight materials are used in joints for assemblies to reduce weight compared to metallic alternatives, providing alignment in composite panels while accommodating vibration and cycles without adding significant mass. Compliance with standards ensures reliability; metallic dowels in structural applications must meet specifications like those in the American Concrete Pavement Association's M-254 for dowel bars in pavements, which require epoxy-coated conforming to ASTM A615 Grade 60 for resistance and minimum yield strengths of 60 . For precision metallic dowels, guidelines align with ASME B18.8.1, emphasizing tolerances for fits and surface finishes to support engineering calculations.

History

Origins and Early Use

The earliest archaeological evidence for dowel-like wooden pegs dates to prehistoric periods, with examples from sites indicating their use in rudimentary shelters and tools for securing structures. At sites like in , dated to around 9000 BCE during the , wooden stakes and pegs fashioned from local trees such as and were possibly employed for structural support in temporary dwellings, demonstrating basic alignment and reinforcement functions. These early forms relied on simple carving techniques, highlighting wood's availability as a primary material from surrounding forests. In , wooden dowels were used as a key element in furniture from early dynastic periods, reinforcing joints in artifacts to ensure durability in the . Geoffrey Killen's analysis of surviving pieces reveals dowels inserted into mortises for beds, stools, and boxes, often made from or sycamore sourced locally, providing stability without metal fasteners. By the 18th Dynasty, around 1332–1323 BCE, this practice advanced in Tutankhamun's artifacts, such as shrine boxes (naoses), where tamarisk and sidder dowels secured components like boards and cornices, sometimes with pastes for added strength amid wood scarcity. Ancient Greek and Roman woodworking extended dowel applications to larger scales, notably in around 500 BCE, where cylindrical wooden coaks aligned hull planks in laced constructions. The Pabuç Burnu shipwreck, dated to 570–560 BCE off Turkey's coast, preserves evidence of wood dowels (1.0–1.4 cm ) inserted obliquely to repair seams, spaced approximately 26 cm apart, marking a transitional use alongside emerging tenons for enhanced hull integrity. Dowels spread culturally through trade and migration, appearing in Asian carpentry by the 12th century CE, where Japanese joiners adopted nail-free techniques from Chinese influences to assemble temples and furniture using interlocking wooden pegs for earthquake resistance. In medieval Europe, from the 11th century onward, carpenter guilds in cities like London and Florence standardized dowel use in timber framing for cathedrals and homes, drawing from Roman precedents to create robust, pegged joints. However, pre-industrial limitations persisted, as hand-carved dowels often exhibited irregularities in shape and size due to manual tools like adzes, resulting in looser fits and reduced joint strength compared to later machined versions.

Modern Developments

The industrialization of dowel production accelerated in the late with the advent of mechanized tools, enabling of wooden dowels for furniture and . In , steam-powered lathes were introduced in the 1840s in , particularly in bobbin factories in Northwest , where water wheels and steam engines drove multiple lathes to turn wooden rods into uniform products like dowels and . This shift from hand-turned dowels to powered machinery dramatically increased output, supporting the growing demand from the Industrial Revolution's furniture and sectors. By the end of the century in the United States, patents for dedicated dowel-making machines, such as Oscar H. Ordway's 1898 design, further streamlined the process by automating cutting and shaping from rough stock. Material innovations expanded dowel applications beyond wood in the 20th century, with dowel pins emerging as essential components in precision machinery for alignment and fastening. Introduced in the early 1900s, these pins provided superior strength and accuracy compared to wooden alternatives, becoming integral to industrial assembly processes where tight tolerances were required. For instance, in automotive manufacturing, dowels facilitated the precise positioning of parts in engine blocks and chassis assemblies, contributing to the efficiency of early mass-production lines. Post-World War II, dowels gained prominence in the 1940s and 1950s, particularly for electrical insulation due to their non-conductive properties and resistance; and other polymers were molded into dowel forms for use in wiring harnesses and electrical enclosures. The invention of the expansion dowel by Artur Fischer in 1958 marked a key milestone, adapting the concept for secure fastening in non-structural applications while leveraging wartime advancements in synthetic materials. Technological advances in the enhanced dowel performance and installation precision. In the , precision jigging systems were developed to ensure accurate of dowel holes, reducing misalignment in and enabling faster production in workshops. By the , fluted and spiral-grooved designs were introduced for wooden dowels, featuring longitudinal grooves that improved glue adhesion and expansion within joints for stronger bonds without increasing diameter. These innovations addressed limitations in smooth dowels, particularly in high-stress applications. The integration of (CAD) in the 1980s revolutionized custom dowel specifications, allowing manufacturers to model complex geometries and tolerances digitally before production, which optimized use and fit for specialized engineering needs. Standards for dowels evolved to promote consistency and safety, with the formation of key guidelines in laying groundwork for modern specifications. The (ANSI) began developing standards during this period, culminating in documents like the predecessor to ASME B18.8.2 for metal dowel pins, which standardized dimensions and tolerances by the mid-20th century. For wooden dowels, sustainability initiatives emerged in the 1990s, with the (FSC) certification—established in 1993—ensuring responsibly sourced hardwoods, leading to widespread adoption of FSC-certified dowels in eco-conscious manufacturing. The global impact of these developments is evident in expanded applications, particularly in prefabricated construction from the post-1960s era, where dowels facilitated modular wood frame assembly for faster on-site erection and reduced waste. In the , enabled of custom dowels with intricate designs, such as variable diameters or embedded features, supporting innovation in and while minimizing traditional tooling costs.

References

  1. https://www.blueprintjoinery.com/blog/what-are-dowels/
  2. https://deslinc.com/blog/guide-dowels-in-construction
  3. https://blog.bairdbrothers.com/dowels-vs-screws-determine-which-joinery-method-is-best-for-your-woodworking-project/
  4. https://mtcopeland.com/blog/a-guide-to-dowel-joints-how-to-make-them/
  5. https://www.mfsupply.com/Precision-Dowel-Pins-Guide-FAQs-s/6609.htm
  6. https://www.ewhannas.com/understanding-dowels-dowel-pins/
  7. https://www.factorem.co/knowledge-hub/the-precise-fit-understanding-dowel-pin-installation-and-removal-techniques
  8. https://www.janeemachining.com/article/uses-of-steel-dowel-pins.html
  9. https://learn.kregtool.com/learn/how-to-make-dowel-joints/
  10. https://www.engineersedge.com/dowel_pin.htm
  11. https://diy.stackexchange.com/questions/11011/what-are-the-advantages-and-disadvantages-of-nails-and-dowel-pins
  12. https://www.birchcutlery.com/news/what-are-the-advantages-of-wooden-dowels-84970819.html
  13. https://www.dcdrawers.com/dowel-joint-advantages-disadvantages/
  14. https://www.cincinnatidowel.com/blog/entry/the-science-behind-dowel-strength-and-flexibility/
  15. https://www.factorem.co/knowledge-hub/dowel-pin-materials-and-their-applications
  16. https://www.globalspec.com/learnmore/mechanical_components/mechanical_fasteners/dowel_pins
  17. https://horberg.com/a-simple-guide-to-dowel-pin-types-materials/
  18. https://www.sciencedirect.com/science/article/am/pii/S0950061821018973
  19. https://us.misumi-ec.com/pdf/press/us_12e_pr1271.pdf
  20. http://www.purchasepartners.com/files/Fastener-Reference-Guide/Pins/Dowell.pdf
  21. https://rajalindustries.com/dowel-pins/
  22. https://www.matweb.com/search/datasheet.aspx?MatGUID=8d78f3cfcb6f49d595896ce6ce6a2ef1
  23. https://monroeengineering.com/blog/5-things-to-consider-when-choosing-dowel-pins/
  24. https://fullerfasteners.com/tech/iso-2338-specifications-parallel-pins/
  25. https://www.leevalley.com/en-us/shop/tools/supplies/joinery/dowel-rods/116661-birch-dowel-rods
  26. https://caldowel.com/products/hardwood-maple-dowel-rods/
  27. https://www.cincinnatidowel.com/blog/entry/raw-material-the-manufacturing-process-of-dowels/
  28. https://extension.okstate.edu/fact-sheets/fundamental-aspects-of-kiln-drying-lumber.html
  29. https://woodweb.com/knowledge_base/Dowel_making.html
  30. https://www.hastiles.com/articles/how-wood-turnings-are-made/
  31. https://www.bessemeter.com/blog/what-every-woodworker-should-know-about-kiln-drying-wood/
  32. https://www.archivemarketresearch.com/reports/dowel-pin-459489
  33. https://www.spirol.com/assets/files/sldp-wp-cold-headed-vs-machined-solid-pins-us.pdf
  34. https://g-fast.com/precision-pins-for-industrial-applications-american-made-quality/
  35. https://www.rcfastener.com/documents/RC_Specs/Pin_Dowel.pdf
  36. https://www.protolabs.com/resources/blog/injection-molding-tolerances/
  37. https://www.ensingerplastics.com/en-us/thermoplastic-materials/modified-plastics/glass-filled
  38. https://www.thy-precision.com/de/guide-to-tolerances-in-plastic-injection-molding/
  39. https://www.huyett.com/resources/production-and-design/secondary-processes
  40. https://rpabrasives.com/news/comprehensive-guide-to-metal-finishing/
  41. https://www.wmberg.com/resources/blogs/dowel-pin-design-guide
  42. https://www.quora.com/Should-you-choose-3D-printing-or-CNC-machining-for-metal-manufacturing
  43. https://forerunner3d.com/design-guide-for-using-dowel-holes-in-3d-printed-parts/
  44. https://www.tfgusa.com/resources/what-is-cold-heading/
  45. https://www.woodmagazine.com/woodworking-tips/techniques/joinery/dowel
  46. https://canadianwoodworking.com/techniques_and_tips/dowel-joinery-simple-strong-and-accurate/
  47. https://www.cincinnatidowel.com/blog/entry/unraveling-the-mystery-between-multi-groove-and-spiral-grooved-dowel-pins/
  48. https://www.mcmaster.com/dowel-pins/
  49. https://www.leevalley.com/en-us/shop/tools/hand-tools/marking-and-measuring/marking-tools/44995-dowel-and-tenon-centers
  50. https://www.chicagodowel.com/products/technical-information/
  51. https://canadianwoodworking.com/techniques_and_tips/how-strong-is-a-dowel-joint/
  52. https://monroeengineering.com/info-pin-common-mistakes-to-avoid-when-using-dowel-pins.php
  53. https://www.structuremag.org/article/aci-318-25-changes-to-anchorage-and-reinforcing-bar-provisions/
  54. https://structuralcalc.com/rebar-development-length-calculator-to-aci-318/
  55. https://www.sciencedirect.com/science/article/abs/pii/S0143974X17310507
  56. https://www.reddit.com/r/hobbycnc/comments/48yjtt/milling_two_sides/
  57. https://www.fastenermart.com/din-6325-dowel-pins.html
  58. https://www.iitk.ac.in/nicee/wcee/article/9_vol7_499.pdf
  59. https://www.huyett.com/blog/dowel-pin-features
  60. https://www.eng-tips.com/threads/guidance-for-doweling-new-concrete-to-existing-concrete-section.369348/
  61. https://www.ancon.co.uk/blog/expansion-and-contraction-joints-in-concrete-construction
  62. https://www.cincinnatidowel.com/blog/entry/flying-high-dowels-impact-on-the-aerospace-industry/
  63. https://www.acpa.org/wp-content/uploads/2021/06/ACPA-Dowel-Spec-M254-04-08-2021-rev1.pdf
  64. https://www.researchgate.net/publication/324538205_The_Wooden_Artefacts
  65. https://www.oxbowbooks.com/9781785704819/ancient-egyptian-furniture/
  66. https://ijcs.ro/public/IJCS-18-08_Abdallah.pdf
  67. https://oaktrust.library.tamu.edu/bitstream/1969.1/ETD-TAMU-2009-08-7158/3/POLZER-THESIS.pdf
  68. https://www.arch2o.com/how-japanese-wood-joints-work-without-nails-the-ancient-art-of-kigumi-in-modern-architecture/
  69. https://www.medievalchronicles.com/medieval-life/medieval-jobs-list/building-the-middle-ages-exploring-the-role-of-a-medieval-carpenter/
  70. http://woodtools.nov.ru/books/egypt_wood/egypt_wood.pdf
  71. https://stuartking.co.uk/history-of-the-lathe-part-three-mechanical-power/
  72. https://datamp.org/patents/search/advance.php?pn=603965&id=4518&set=1
  73. https://www.engineersedge.com/hardware/machine_dowel_pins_chart_ansi_asme__13076.htm
  74. https://www.mefa.de/en/blog/dowel
  75. https://www.dowl-it.com/about
  76. https://www.atlasdowel.com/blog/entry/atlas-dowel-origin-and-evolution/
  77. https://www.scribd.com/document/712661710/ASME-B18-8-2-2000-2010
  78. https://www.chicagodowel.com/fsc/
  79. https://awc.org/publications/2018-nds/
Add your contribution
Related Hubs
User Avatar
No comments yet.