ISO 31
ISO 31
Main page
I

ISO 31

logo
Community Hub0 subscribers
Read side by side
ISO 31
View on Wikipedia
from Wikipedia

ISO 31 (Quantities and units, International Organization for Standardization, 1992) is a superseded international standard concerning physical quantities, units of measurement, their interrelationships and their presentation.[1] It was revised and replaced by ISO/IEC 80000.

Parts

[edit]

The standard comes in 14 parts:

A second international standard on quantities and units was IEC 60027.[2] The ISO 31 and IEC 60027 Standards were revised by the two standardization organizations in collaboration ([1], [2]) to integrate both standards into a joint standard ISO/IEC 80000 - Quantities and Units in which the quantities and equations used with SI are to be referred as the International System of Quantities (ISQ). ISO/IEC 80000 supersedes both ISO 31 and part of IEC 60027.

Coined words

[edit]

ISO 31-0 introduced several new words into the English language that are direct spelling-calques from the French.[3] Some of these words have been used in scientific literature.[4][5][6][7]

New phrase Existing phrase Technical meaning
massic <quantity> specific <quantity> a quantity divided by its associated mass
volumic <quantity> [volumic] <quantity> density a quantity divided by its associated volume
areic <quantity> surface <quantity> density a quantity divided by its associated area
lineic <quantity> linear <quantity> density a quantity divided by its associated length
[edit]
  • Canada: CAN/CSA-Z234-1-89 Canadian Metric Practice Guide (covers some aspects of ISO 31-0, but is not a comprehensive list of physical quantities comparable to ISO 31)
  • United States: There are several national SI guidance documents, such as NIST SP 811, NIST SP 330, NIST SP 814, IEEE/ASTM SI 10, SAE J916. These cover many aspects of the ISO 31-0 standard, but lack the comprehensive list of quantities and units defined in the remaining parts of ISO 31.

See also

[edit]
  • SI – the international system of units
  • BIPM – publishes freely available information on SI units [3], which overlaps with some of the material covered in ISO 31-0
  • IUPAP – much of the material in ISO 31 comes originally from Document IUPAP-25 of the Commission for Symbols, Units and Nomenclature (SUN Commission) [4] of the International Union of Pure and Applied Physics
  • IUPAC – some of the material in ISO 31 originates from the Interdivisional Committee on Terminology, Nomenclature and Symbols [5] of the International Union of Pure and Applied Chemistry
  • Quantities, Units and Symbols in Physical Chemistry – this IUPAC "Green Book" covers many ISO 31 definitions
  • IEC 60027 Letter symbols to be used in electrical technology
  • ISO 1000 SI Units and Recommendations for the use of their multiples and of certain other units (bundled with ISO 31 as the ISO Standards Handbook – Quantities and units)

Notes

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

ISO 31

View on Grokipedia
from Grokipedia
ISO 31 was a series of international standards developed and published by the International Organization for Standardization (ISO) in the early 1990s, providing standardized names, symbols, definitions, and units for physical quantities across various scientific and technological fields.[1] The series aimed to promote consistency in the expression of measurements and equations, emphasizing the use of the International System of Units (SI) and coherent unit systems to facilitate communication in science and engineering.[2] Comprising 13 parts plus an introductory Part 0 on general principles, ISO 31 covered topics ranging from fundamental concepts like space, time, and mechanics to specialized areas such as acoustics, nuclear physics, and mathematical notation.[2] The general principles outlined in ISO 31-0 established foundational guidelines for handling physical quantities, recommending that they be expressed as products of numerical values and units (e.g., length = 1.5 m), and prioritizing equations between quantities over those involving numerical values alone to maintain unit independence.[2] Subsequent parts detailed specific quantities: for instance, Part 1 addressed space and time (e.g., position, velocity, angular measures), Part 3 covered mechanics (e.g., force, energy, power), and Part 11 focused on mathematical signs and symbols for use in physical contexts.[3] Where applicable, each part included conversion factors between units and stressed the importance of dimensional analysis based on seven base SI quantities like length (L), mass (M), and time (T).[2] Although influential for decades as a key reference for scientific notation and measurement standardization, the entire ISO 31 series was progressively withdrawn starting in 2009, with the last parts retired by 2019, and fully superseded by the joint ISO/IEC 80000 series to incorporate updates from international electrical and metrology bodies.[4][5] The ISO 80000 standards maintain the core objectives of ISO 31 but expand coverage, refine notations (e.g., for mathematical symbols), and align more closely with evolving SI definitions and global practices.[4]

Introduction

Purpose and Scope

ISO 31 is an international standard developed by the International Organization for Standardization (ISO) Technical Committee 12 to specify physical quantities, units of measurement, their interrelationships, and guidelines for their presentation in scientific and technical documents.[1] It establishes a framework for consistent notation and usage to ensure clarity and precision in global communication across various fields of science and technology.[2] The scope of ISO 31 encompasses general principles for handling quantities and units, as well as detailed recommendations for specific categories such as space and time, mechanics, electricity and magnetism, and specialized areas like atomic and nuclear physics.[6] This includes definitions of names, symbols, and conversion factors where appropriate, with an emphasis on coherent systems derived from the International System of Units (SI) to minimize ambiguity in equations and measurements.[2] The standard applies broadly to technical documentation, promoting interoperability in international collaboration by standardizing how quantities are expressed and interrelated.[6] The primary objectives of ISO 31 are to foster uniformity in scientific notation, thereby avoiding misunderstandings due to inconsistent terminology or symbology, and to support the adoption of the SI as the preferred coherent unit system worldwide. By providing a common language for quantities and units, it facilitates easier exchange of information among researchers, engineers, and industries, enhancing efficiency in fields ranging from basic physics to applied technologies. First parts of the series were released in the 1960s, with the complete set of 14 parts finalized by 1992.

Development and History

The development of ISO 31 originated in the late 1950s through the efforts of ISO Technical Committee 12 (TC 12), established in 1947 to standardize quantities, units, symbols, and conversion factors across scientific and technological fields.[7] TC 12's work aligned closely with the global push for unified measurement systems, culminating in the first recommendations under ISO 31 in 1960, which directly supported the adoption of the International System of Units (SI) at the 11th General Conference on Weights and Measures (CGPM). These early recommendations built on foundational influences from international bodies, including the International Union of Pure and Applied Physics (IUPAP), which provided recommendations on symbols and nomenclature in physics, and the International Bureau of Weights and Measures (BIPM), whose inaugural SI Brochure of 1960 outlined the core principles of the SI.[8] Initial parts of the ISO 31 series were published between 1965 and 1973, covering basic quantities and specialized areas such as space, time, mechanics, and physical phenomena; for instance, ISO/R 31 Part I (1965) addressed SI base quantities and units, while ISO 31-8 (1973) focused on physical quantities and units in mechanics.[9][10] A significant revision process began in the 1980s, leading to a major update in 1992 that incorporated amendments to resolve inconsistencies across the growing number of parts and to accommodate advancements in fields like electronics and materials science.[1] By 1998, the full series—comprising 14 parts in total, spanning general principles to specialized topics in areas such as nuclear physics, semiconductors, and characteristic numbers—had been completed with final amendments, ensuring comprehensive coverage of quantities and units in diverse scientific domains.[11][12] ISO 31's evolution reflected ongoing refinements to meet the demands of emerging technologies, but by the early 2000s, it faced obsolescence due to rapid updates in metrology and the need for expanded scope beyond physical quantities alone. The standard was officially superseded by ISO 80000 starting in 2006, with progressive withdrawals: for example, ISO 31-0 was withdrawn on November 17, 2009, and the last parts followed suit by 2019 as corresponding ISO 80000 sections were published.[1] This transition marked the end of ISO 31's active lifecycle after over four decades of service in standardizing scientific communication.

Structure and Content

General Principles (ISO 31-0)

ISO 31-0 establishes the foundational principles for expressing physical quantities, units, and symbols consistently across scientific and technical fields. It distinguishes between a physical quantity, which represents an abstract concept such as length or mass, and a unit, which is a specific measure like the meter or kilogram used to quantify it. Quantities of the same kind are mutually comparable, allowing direct relations such as comparing wavelength to distance, both as forms of length.[2] Symbols for quantities are written in italic type (e.g., l for length, m for mass), while unit symbols use upright roman type (e.g., m for meter, kg for kilogram) to avoid confusion in equations and text. The standard specifies that a quantity is expressed as the product of its numerical value and unit, formatted without a multiplication sign when the value is an integer from 1 to 9, such as l = 5 m. For larger or decimal values, a space separates the number and unit, as in λ = 5.896 × 10^{-7} m. In equations involving quantities, the preferred form uses symbols alone for unit independence (e.g., v = l / t), with multiplication indicated by a dot (·), space, or implied juxtaposition (e.g., E = (1/2) m v²). Dimensionless quantities, such as refractive index n = 1.53, have the unit "1" and are treated similarly.[2][13] The standard emphasizes coherent unit systems, particularly the International System of Units (SI), where derived units maintain equations without conversion factors other than 1. For instance, in mechanics, force equals mass times acceleration, yielding the newton (N = kg · m / s²) directly from base units of kilogram, meter, and second. This coherence ensures that substituting SI units into fundamental equations balances numerically, as in F = m a where 1 N = 1 kg · m/s². SI includes seven base units and uses prefixes like kilo- (10³) and milli- (10^{-3}) for decimal multiples, enabling scalable notation such as km for kilometer.[2] For non-SI units, ISO 31-0 provides rules for conversion factors to maintain accuracy, noting that the numerical value varies inversely with unit size (e.g., 5.896 × 10^{-7} m = 589.6 nm). Common exact conversions include those for legacy units, presented in tables for reference. Examples are:
Non-SI UnitSI Equivalent
1 inch0.0254 m (exactly)
1 foot0.3048 m (exactly)
1 yard0.9144 m (exactly)
1 mile1.609 344 km (exactly)
The third edition of ISO 31-0, published in 1992, incorporated amendments through 2000, including updates to SI base and derived units, prefixes, and explicit treatment of the dimensionless unit "one." These principles apply uniformly to the specialized parts of ISO 31, ensuring consistent notation for quantities in fields like space, time, and electricity.[14][15]

Core Parts on Quantities and Units

The core parts of ISO 31, specifically Parts 1 through 5, establish standardized names, symbols, definitions, and units for fundamental physical quantities in domains essential to general physics and engineering, ensuring alignment with the International System of Units (SI).[3] These parts provide tabular listings of quantities, their recommended symbols (typically italicized letters), and corresponding SI units, along with conversion factors where non-SI units are noted, to promote consistent notation across scientific literature and applications.[16] They emphasize interrelations between quantities through basic equations derived from physical principles, facilitating coherent calculations without introducing specialized terminology.[17] Part 31-1 addresses quantities and units of space and time, defining 21 key quantities to describe positional and temporal aspects of physical systems.[3] Fundamental examples include length (ll), the distance between two points along a straight line, with the SI unit meter (m); area (AA), the measure of a surface, in square meters (m²); volume (VV), the space enclosed by a surface, in cubic meters (m³); and time (tt), the duration of an interval, in seconds (s).[18] Interrelations are highlighted, such as speed (v=dsdtv = \frac{ds}{dt}), where ss denotes path length, linking spatial and temporal quantities to describe motion.[18] Part 31-2 covers periodic and related phenomena, specifying 17 quantities related to oscillatory and cyclic processes.[16] Central quantities are frequency (ff), the number of cycles per unit time, with the SI unit hertz (Hz = s−1^{-1}), and angular velocity (ω\omega), the rate of change of angular position, in radians per second (rad/s).[19] Key relations include f=1/Tf = 1/T, where TT is the period, and ω=2πf\omega = 2\pi f, connecting linear frequency to angular measures for applications in waves and rotations.[19] In Part 31-3 on mechanics, 38 quantities are defined for classical mechanical systems, focusing on motion, forces, and energy transfer.[17] Core examples encompass mass (mm), a measure of inertia, in kilograms (kg); force (FF), the interaction causing acceleration, in newtons (N = kg⋅\cdotm/s²); and energy (EE), the capacity to do work, in joules (J = N⋅\cdotm).[20] A pivotal interrelation is Newton's second law, F=maF = m a, where aa is acceleration, underscoring the dynamic link between force, mass, and motion.[20] Part 31-4 details 43 quantities and units for heat, emphasizing thermal properties and energy exchanges.[21] Key quantities include thermodynamic temperature (TT), a base SI quantity indicating thermal equilibrium, in kelvins (K), and heat capacity (CC), the heat required to raise temperature by one kelvin, in joules per kelvin (J/K).[22] Relations such as Q=CΔTQ = C \Delta T, where QQ is heat transferred and ΔT\Delta T is temperature change, illustrate how thermal quantities interconnect with energy concepts from mechanics.[22] Part 31-5 outlines 70 quantities for electricity and magnetism, covering electric and magnetic fields and circuits.[23] Fundamental ones are electric current (II), the flow of charge, a base SI quantity in amperes (A), and electric potential difference (UU), the work per unit charge, in volts (V = J/A).[24] An essential relation is electrical power P=UIP = U I, in watts (W = J/s), linking voltage and current to energy dissipation rates.[24] Across these parts, tables of recommended symbols ensure uniformity, with all units coherent within the SI framework, supporting precise expression of physical laws in equations like those noted.[3][23]

Specialized Parts for Specific Fields

The specialized parts of ISO 31, spanning Parts 6 through 13, extend the standard's framework to domain-specific quantities in optics, acoustics, chemistry, nuclear physics, mathematics, fluid dynamics, and solid-state physics, providing standardized names, symbols, definitions, and units tailored to these interdisciplinary fields.[1] These parts emphasize practical applications in advanced scientific contexts, often incorporating non-SI units with explicit conversion factors to bridge legacy systems and SI coherence, such as the electronvolt in particle physics or the barn in nuclear interactions.[25] By focusing on quantities beyond general mechanics and thermodynamics, they facilitate precise communication in specialized research and engineering.[4] Part 31-6 addresses quantities in light and optical systems, defining luminous flux ($ \Phi_v )asthetotalluminouspoweremittedorreceived,withtheunitlumen(lm),and[illuminance](/page/Illuminance)() as the total luminous power emitted or received, with the unit lumen (lm), and [illuminance](/page/Illuminance) ( E_v )astheluminousfluxperunitarea,measuredin[lux](/page/Lux)(lx),where1lx=1lm/[m2](/page/Msquared).Italsocoversrelatedradiantquantities,suchas[radiantenergy](/page/Radiantenergy)() as the luminous flux per unit area, measured in [lux](/page/Lux) (lx), where 1 lx = 1 lm/[m²](/page/M_squared). It also covers related radiant quantities, such as [radiant energy](/page/Radiant_energy) ( Q_e ,injoules,J)andradiantpower(, in joules, J) and radiant power ( \Phi_e $, in watts, W), alongside conversion factors like 1 Ångström (Å) = 10^{-10} m for wavelength scales.[26] This part supports photometry and radiometry by ensuring consistent notation for electromagnetic radiation in optical engineering. Part 31-7 focuses on acoustics, specifying sound pressure ($ p )asthedifferencebetweeninstantaneoustotalpressureand[staticpressure](/page/Staticpressure),usingthepascal(Pa)astheunit,and[soundintensity](/page/Soundintensity)() as the difference between instantaneous total pressure and [static pressure](/page/Static_pressure), using the pascal (Pa) as the unit, and [sound intensity](/page/Sound_intensity) ( I )asthesoundpowerperunitareaperpendiculartopropagation,inwattspersquaremeter(W/m2).[](https://www.iso.org/standard/3641.html)Itincludes39quantitiestotal,suchas[soundpower](/page/Soundpower)() as the sound power per unit area perpendicular to propagation, in watts per square meter (W/m²).[](https://www.iso.org/standard/3641.html) It includes 39 quantities total, such as [sound power](/page/Sound_power) ( P ,inW)and[frequency](/page/Frequency)(, in W) and [frequency](/page/Frequency) ( f $, in s^{-1}), with conversion factors for legacy units like the phon for perceived loudness levels.[27] These definitions aid in standardizing measurements for noise control and audio engineering.[28] In Part 31-8, physical chemistry and molecular physics quantities are detailed, including amount of substance ($ n )asthenumberofspecifiedelementaryentities,withthemole(mol)astheSIunit,and[molarmass](/page/Molarmass)() as the number of specified elementary entities, with the mole (mol) as the SI unit, and [molar mass](/page/Molar_mass) ( M )asmassperamountofsubstance,inkilogramspermole(kg/mol).[](https://www.iso.org/standard/3644.html)Thepartprovidesquantitieslikerelative[molecularmass](/page/Molecularmass)() as mass per amount of substance, in kilograms per mole (kg/mol).[](https://www.iso.org/standard/3644.html) The part provides quantities like relative [molecular mass](/page/Molecular_mass) ( M_r $, dimensionless), with conversions such as $ M $ in g/mol equating to $ M_r $ in kg/kmol, promoting uniformity in thermodynamic and kinetic analyses.[29] This facilitates stoichiometric calculations and molecular property evaluations across chemical disciplines.[30] Part 31-9 covers atomic and nuclear physics, defining activity ($ A )astheexpectationvalueofdecayeventsperunittime,usingthe[becquerel](/page/Becquerel)(Bq=s−1)astheunit,and[energylevel](/page/Energylevel)() as the expectation value of decay events per unit time, using the [becquerel](/page/Becquerel) (Bq = s^{-1}) as the unit, and [energy level](/page/Energy_level) ( E )fordiscreteatomicornuclearstates,oftenexpressedinelectronvolts(eV),where1eV=1.602×10−19J.[](https://www.iso.org/standard/3647.html)Itlists51quantities,includingconstantslikethe[elementarycharge](/page/Elementarycharge)() for discrete atomic or nuclear states, often expressed in electronvolts (eV), where 1 eV = 1.602 \times 10^{-19} J.[](https://www.iso.org/standard/3647.html) It lists 51 quantities, including constants like the [elementary charge](/page/Elementary_charge) ( e ,incoulombs,C)and[Planckconstant](/page/Planckconstant)(, in coulombs, C) and [Planck constant](/page/Planck_constant) ( h $, in J s), with conversion factors for non-SI units such as the atomic mass unit (u).[31] These standards underpin quantum mechanics and spectroscopy applications.[32] Part 31-10 pertains to nuclear reactions and ionizing radiations, specifying cross-section ($ \sigma )astheeffectiveareaforinteractionprobability,withthebarn(b=10−28m2)asacommonunit,anddose() as the effective area for interaction probability, with the barn (b = 10^{-28} m²) as a common unit, and dose ( D $) as energy absorbed per unit mass, in grays (Gy = J/kg).[33] Among its 70 quantities, it includes conversion factors for units like the curie (Ci) to Bq (1 Ci = 3.7 \times 10^{10} Bq), essential for radiation protection and reactor design.[33] This part ensures consistent dosimetry and interaction metrics in nuclear science.[4] Part 31-11 provides guidelines for mathematical signs and symbols in physical sciences, recommending operators such as the del ($ \nabla )for[gradient](/page/Gradient)or[divergence](/page/Divergence)andthe[summation](/page/Summation)() for [gradient](/page/Gradient) or [divergence](/page/Divergence) and the [summation](/page/Summation) ( \sum $) for series, with rules for printing vectors (bold italics) and tensors.[34] It covers logical symbols (e.g., $ \in $ for set membership) and functions (e.g., $ \sin $), emphasizing verbal equivalents and notation for scalars, to promote clarity in equations across technical documents.[35] These conventions support interdisciplinary mathematical modeling.[34] Part 31-12 defines characteristic numbers for transport phenomena, including the Reynolds number ($ Re = \frac{\rho v d}{\eta} $), a dimensionless ratio of inertial to viscous forces where $ \rho $ is density, $ v $ velocity, $ d $ diameter, and $ \eta $ viscosity, and the Mach number ($ Ma = \frac{v}{c} $), the ratio of flow speed to sound speed.[12] It selects 25 such numbers, without units due to their dimensionless nature, to describe phenomena like fluid flow and heat transfer.[36] This aids predictive modeling in aerodynamics and chemical engineering.[12] Part 31-13 targets solid state physics, defining carrier density ($ n )asthenumberofchargecarriersperunitvolume,incubicmetersinverse(m−3),andmobility() as the number of charge carriers per unit volume, in cubic meters inverse (m^{-3}), and mobility ( \mu )asdriftvelocityperunit[electricfield](/page/Electricfield),insquaremeterspervolt−second(m2/(Vs)).[](https://www.iso.org/standard/3657.html)Itenumerates62quantities,suchaslatticespacing() as drift velocity per unit [electric field](/page/Electric_field), in square meters per volt-second (m²/(V s)).[](https://www.iso.org/standard/3657.html) It enumerates 62 quantities, such as lattice spacing ( d $, in m) and conversion factors like 1 Å = 10^{-10} m for crystal structures, supporting semiconductor and materials science analyses.[37] These definitions enable standardized characterization of electronic properties in solids.[38]

Key Conventions

Coined Terms and Symbols

ISO 31 standardized the nomenclature and use of several coined units within the International System of Units (SI), particularly in its parts addressing electricity, magnetism, and radiation, to ensure consistent nomenclature across scientific and technical fields. Among these, the siemens (symbol: S), defined as the SI unit of electric conductance and equal to the reciprocal of the ohm (Ω⁻¹), was detailed in ISO 31-5:1992, by specifying its use alongside related quantities like electric resistance and admittance.[23][8] Similarly, the weber (symbol: Wb), the SI unit of magnetic flux, was detailed in the same part, linking it to electromagnetic quantities such as magnetic flux density and electromotive force.[23][8] Neologisms in ISO 31 often drew from notable scientists, embedding etymological significance into the terminology. The term "siemens" honors Ernst Werner von Siemens, a German inventor and industrialist pivotal in electrical engineering advancements, with its adoption as an SI derived unit traced to the 14th General Conference on Weights and Measures (CGPM) in 1971, later codified in ISO 31.[8] The "weber" commemorates Wilhelm Eduard Weber, a German physicist who contributed to electromagnetism, including the development of early electrical units in the 19th century.[8] In the domain of ionizing radiation, addressed in ISO 31-9:1992, the gray (symbol: Gy), the SI unit of absorbed dose defined as 1 joule per kilogram (J/kg), was detailed following its approval as an SI unit by the 15th CGPM in 1975, and was named after Louis Harold Gray, a British physicist renowned for his work on radiation dosimetry.[32][8] Symbols for quantities in ISO 31 followed rigorous conventions to promote clarity, as outlined in ISO 31-0:1992 and elaborated in ISO 31-11:1992. For instance, the vacuum permittivity is denoted as ε0\varepsilon_0 and magnetic permeability of vacuum as μ0\mu_0, where the subscript "0" indicates a constant value and is rendered in roman (upright) type to distinguish it from variable subscripts.[1][34][39] Rules specified that symbols for physical quantities and variables, including their subscripts when denoting other quantities (e.g., italic xix_i for a component), must be in italic type, while subscripts for labels, units, or descriptive elements (e.g., roman subscript "m" in HmH_\mathrm{m} for molar enthalpy) use roman type.[40][39] Symbol conventions in ISO 31 emphasized precision and avoided informal shortcuts to prevent misinterpretation. Abbreviations such as "amp" for ampere were prohibited, with the standard symbol A required instead; full unit names like "ampere" were preferred in running text for readability, while symbols sufficed in equations or tables.[39][1] This approach extended to all units, ensuring that only internationally agreed symbols from the SI framework were employed, aligning with broader principles in ISO 31-0 for coherent presentation.[1]

Presentation and Formatting Rules

ISO 31-0 establishes specific typographic conventions to ensure clarity and consistency in representing quantities and units. Quantity symbols are printed in italic type (e.g., m for mass), while unit symbols are printed in roman (upright) type (e.g., kg for kilogram). A non-breaking space separates the numerical value from the unit symbol (e.g., 5 kg, not 5kg), and this space should be omitted only if it risks ambiguity in multiplication of units. These rules promote unambiguous visual distinction between variables and fixed units in scientific and technical documents.[2] For compound units, ISO 31-0 recommends expressing multiplication with a space or raised dot and division with a solidus (/) or negative exponents, such as m/s or m s⁻¹ for velocity, while avoiding stacked fractions like m/s/kg to prevent complexity. Unit symbols remain unchanged in the plural form regardless of the numerical value (e.g., 5 m or 1 m), ensuring uniformity across expressions. Additionally, unit symbols are not followed by a period (full stop) except at the end of a sentence (e.g., 10 m, not 10 m.), a convention designed to differentiate them from abbreviations and later adopted in style guides such as APA.[2][41] Regarding numerical formatting, the decimal sign is either a comma or a point on the baseline (e.g., 3,14 or 3.14), with the choice depending on local conventions, but thousands separators should never use these symbols—instead, spaces are preferred for grouping digits in large numbers (e.g., 1 000 m). For very large or small values, scientific notation with ×10ⁿ is advised (e.g., 5.896 × 10⁻⁷ m). In tables and figures, numerical values of quantities are recommended to be expressed as ratios (e.g., λ/nm = 589.6) to maintain unit independence, and symbols should be aligned for readability, typically right-justifying unit columns or aligning decimals in value columns.[42][2][13]

Supersession and Influence

Replacement by ISO 80000

The replacement of ISO 31 by the ISO/IEC 80000 series began in 2006 and was completed gradually over the following years to facilitate compatibility with existing documents and practices. ISO 80000-1:2009, published in November 2009, directly superseded ISO 31-0:1992 (along with ISO 1000:1992), leading to the withdrawal of ISO 31-0 on 17 November 2009. Subsequent parts of ISO 80000 followed suit, with examples including ISO 80000-3:2006 replacing ISO 31-1 and ISO 31-2, ISO 80000-2:2009 superseding ISO 31-11, and ISO 80000-8:2007 updating ISO 31-7; by 2019, all 14 parts of ISO 31 had been phased out in favor of the new series. The ISO 80000 series continues to evolve, with revisions such as ISO 80000-1:2022 and amendments in 2025 to parts like ISO 80000-3 and ISO 80000-7.[43][4][44] The primary reasons for this replacement included the need for a joint ISO/IEC effort to harmonize standards on quantities and units, reflecting advances in science, engineering, and information technology that demanded greater digital compatibility and support for emerging interdisciplinary fields. ISO 31, developed in the late 20th century, no longer fully addressed evolving requirements such as standardized notations for computational and data-intensive applications in information technology or quantities relevant to biological and environmental sciences. The new series thus expanded coverage to include previously underrepresented areas, ensuring alignment with the International System of Quantities (ISQ) and ongoing developments in metrology.[4][45][46] Key differences between ISO 80000 and its predecessor lie in structure, scope, and technical updates: the series comprises more than 15 parts (compared to ISO 31's 14), allowing for broader topical coverage, including a dedicated part for information science and technology (ISO 80000-13) absent in ISO 31. Symbols and notations were revised for enhanced Unicode compatibility to support digital typesetting and international communication, while incorporating updated recommendations from bodies like the International Union of Pure and Applied Chemistry (IUPAC) and the International Union of Pure and Applied Physics (IUPAP) for consistency in physical and chemical quantities. For instance, ISO 80000-2 introduces new sections on standard number sets, elementary geometry, combinatorics, and transforms, expanding beyond ISO 31-11's scope.[44][25][4] Transition guidance emphasized continuity, with many core rules and conventions from ISO 31 retained to minimize disruption in legacy scientific literature and engineering practices. The gradual withdrawal process allowed time for adoption, and ISO 80000 places stronger emphasis on the primacy of quantities over units, accompanied by more comprehensive conversion tables and definitions to aid practical application across disciplines. New parts, such as ISO 80000-8 on acoustics, build upon and expand ISO 31-7 by including additional quantities relevant to modern measurement techniques.[45][4]

Related National Standards

The German standard DIN 1313 serves as a direct adaptation of the principles outlined in ISO 31 for quantities and units, providing guidelines on symbols, notation, and usage in technical documentation and engineering contexts. Published in versions such as DIN 1313:1998, it incorporates recommendations from ISO 31-0 and related parts, emphasizing SI units and their application in education and professional practice within Germany. This standard has been widely used in engineering education to ensure consistency in expressing physical quantities. In the United Kingdom, BS 350 aligns with ISO 31 by providing conversion factors for units commonly used in engineering and industry, facilitating transitions between imperial and metric systems while adhering to ISO 31's conventions for quantities.[47] The 2004 edition of BS 350:2004 explicitly supports inter-conversion for quantities like area, mass, and energy, drawing on ISO 31's foundational principles, though it was later updated to incorporate elements of BS ISO 80000 following the supersession of ISO 31.[47] American standards from ANSI and ASME have incorporated notation principles from ISO 31, particularly in ASME Y14.5 for geometric dimensioning and tolerancing in engineering drawings, where symbols for quantities and units follow ISO-aligned conventions to promote international compatibility. This influence extends to NIST's SI guides, which reference ISO 31 extensively for rules on unit symbols, printing conventions, and coherent systems, shaping U.S. federal policy on metric usage in scientific and technical publications.[13] The French NF X 02-0xx series, including NF X02-001, mirrors ISO 31's structure for quantities and units, with a focus on general principles and their application in scientific publishing and education.[48] Developed by AFNOR, this series emphasizes SI unit adoption and notation consistency, adapting ISO 31's guidelines to French-language contexts while promoting standardized expression in technical fields. Many national standards bodies, such as Japan's JIS, adopted ISO 31 verbatim during the 1970s and 1990s to harmonize quantities and units with international practices, integrating its symbols and conventions into domestic engineering and scientific standards.[49] Post-2010, these bodies transitioned to ISO 80000, retaining core ISO 31 elements like italicized quantity symbols for continuity in technical documentation.[49]

References

  1. ISO 31-0:1992 - Quantities and units — Part 0: General principles
  2. [PDF] ISO 31-0:1992 - iTeh Standards
  3. ISO 31-1:1992 - Quantities and units — Part 1: Space and time
  4. NIST Guide to the SI, Appendix D: Bibliography
  5. https://www.intertekinform.com/en-au/standards/iso-31-1-1992-612106_saig_iso_iso_1404014/
  6. New International Standards for Quantities and Units - ResearchGate
  7. About ISO
  8. ISO/TC 12 - Quantities and units
  9. [PDF] SI Brochure - 9th ed./version 3.02 - BIPM
  10. [PDF] ISO/R 31:1965 - iTeh Standards
  11. ISO 31-8:1973 - Title missing - Legacy paper document
  12. ISO 31-1:1992/Amd 1:1998 - Quantities and units — Part 1
  13. ISO 31-12:1992 - Quantities and units — Part 12: Characteristic ...
  14. NIST Guide to the SI, Chapter 7: Rules and Style Conventions for ...
  15. NIST Guide to the SI, Appendix B: Conversion Factors
  16. ISO 31-0:1992/Amd 2:2005 - Quantities and units
  17. ISO 31-0:1992/Amd 1:1998 - Quantities and units
  18. ISO 31-2:1992 - Quantities and units — Part 2: Periodic and related ...
  19. ISO 31-3:1992 - Quantities and units — Part 3: Mechanics
  20. [PDF] IS0 31-1 - iTeh Standards
  21. [PDF] INTERNATIONAL STANDARD - iTeh Standards
  22. [PDF] ISO 31-3 | iTeh Standards
  23. ISO 31-4:1992 - Quantities and units — Part 4: Heat
  24. [PDF] ISO - 31-4 - iTeh Standards
  25. ISO 31-5:1992 - Quantities and units — Part 5
  26. [PDF] ISO - 31-5 - iTeh Standards
  27. [PDF] Quantities, Units and Symbols in Physical Chemistry - IUPAC
  28. [PDF] ISO - 31-6 - iTeh Standards
  29. ISO 31-7:1992 - Quantities and units — Part 7: Acoustics
  30. [PDF] ISO - 31-7 - iTeh Standards
  31. ISO 31-8:1992 - Quantities and units — Part 8
  32. [PDF] ISO - 31-8 - iTeh Standards
  33. ISO 31-9:1992 - Quantities and units — Part 9: Atomic and nuclear ...
  34. [PDF] INTERNATIONAL STANDARD
  35. Nuclear reactions and ionizing radiations - ISO 31-10:1992
  36. ISO 31-11:1992 - Quantities and units — Part 11
  37. [PDF] ISO 31-11:1992 - iTeh Standards
  38. [PDF] INTERNATIONAL STANDARD
  39. ISO 31-13:1992 - Quantities and units — Part 13: Solid state physics
  40. [PDF] INTERNATIONAL STANDARD
  41. [PDF] Guide for the Use of the International System of Units (SI)
  42. [PDF] On the use of italic and roman fonts for symbols in scientific text
  43. NIST Guide to the SI, Chapter 6: Rules and Style Conventions for ...
  44. [PDF] ISO 31-0 - iTeh Standards
  45. ISO 80000-1:2009 - Quantities and units — Part 1: General
  46. https://www.iso.org/obp/ui/#iso:std:iso:80000-1:ed-1:v1:en
  47. Making it all add up - International Standards for quantities and units ...
  48. ISO 80000-1:2022 - Quantities and units — Part 1: General
  49. Conversion factors for units - BS 350:2004 - BSI Knowledge
  50. Standard NF X02-001 - Afnor EDITIONS
  51. Harmonization of JIS with international standards
User Avatar
No comments yet.