Hubbry Logo
Panhard 178Panhard 178Main
Open search
Panhard 178
Community hub
Panhard 178
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Panhard 178
Panhard 178
from Wikipedia
The rear of the same vehicle, showing the position of the second driver; the hull, despite having been repainted with a number belonging to the third production batch, is in fact that of a Panhard 178B. The APX3B turret is of the latest type with a rear episcope

Key Information

The Panhard 178[2] (officially designated as Automitrailleuse de Découverte Panhard modèle 1935,[2] 178 being the internal project number at Panhard) or "Pan-Pan" was an advanced[2] French reconnaissance 4x4 armoured car that was designed for the French Army Cavalry units before World War II. It had a crew of four[2] and was equipped with an effective 25 mm main armament and a 7.5 mm coaxial machine gun.[2]

In 1940, a number of these vehicles were taken over by the Germans after the Fall of France and employed as the Panzerspähwagen P204 (f);[2] for some months after the June armistice, production continued for the benefit of Germany. After the war, a derived version, the Panhard 178B, was again taken into production by France.

Development

[edit]

In December 1931, the French Cavalry conceived a plan for the future production of armoured fighting vehicles. One of the classes foreseen was that of an Automitrailleuse de Découverte[2] or AMD, a specialised long range reconnaissance vehicle. The specifications were formulated on 22 December 1931, changed on 18 November 1932 and approved on 9 December 1932. They called for a weight of 4 metric tons (4.0 t), a range of 400 kilometres (250 mi), a speed of 70 km/h, a cruising speed of 40 km/h, a turning circle of 12 metres (39 ft), 5–8 mm armour, a 20 mm gun and a 7.5 mm machine gun.

In 1933,[2] one of the competing companies — the others being Renault, Berliet and Latil — which had put forward proposals, Panhard, was allowed to build a prototype. The other companies also were ordered to build prototypes: Renault constructed two vehicles of a Renault VZ, including an armoured personnel carrier variant, Berliet constructed a single Berliet VUB and Latil belatedly presented a design in April 1934.[3] The Panhard vehicle was ready in October 1933[4] and presented to the Commission de Vincennes in January 1934 under the name Panhard voiture spéciale type 178. It carried a Vincennes workshop (Avis) 13.2 mm machine gun turret, as the intended one was not ready yet. After testing between 9 January and 2 February 1934, the type, despite having larger dimensions than prescribed and thus being a lot heavier than four tons, was accepted by the commission on 15 February under the condition that some small modifications were carried out. Of all the competing projects, it was considered the best: the Berliet VUB e.g. was reliable but too heavy and traditional; the Latil version had no all-terrain capacity. In the autumn, the improved prototype, now lacking the bottom tracks of the original type, was tested by the Cavalry. In late 1934, the type was accepted under the name AMD Panhard Modèle 1935.[2] The type was now fitted with the APX3B turret.

After complaints about reliability, such as cracking gun sights, and overheating, between 29 June and 2 December 1937 a new test programme took place, resulting in many modifications, including the fitting of a silencer and a ventilator on the turret. The ultimate design was very advanced for its day and still appeared modern in the 1970s.[2] It was the first 4x4 armoured car mass-produced for a major country.[2]

Production

[edit]
The old Panhard factory where the AMD 35s were assembled

The final assembly and painting of the armoured cars took place in the Panhard & Levassor factory at the Avenue d'Ivry in the 13th arrondissement of Paris. There, however, only the automotive parts and lesser fittings were built in: the armoured hull was in its entirety prefabricated by forges serving as subcontractors. At first, the main supplying company was Batignolles-Châtillon at Nantes, which could supply a maximum of about twenty per month; in 1940, the forge at Firminy became dominant.[5] Likewise the turret, fitted with its armament by the Atelier de construction de Rueil (ARL), was made by subcontractors, mainly the Société française de constructions mécaniques (or "Cail") at Denain.[6] Turret production tended to trail behind that of the hulls; on 1 September 1939, this order backlog had grown to 35; that there was little hope of solving this problem is shown by the production planned on 28 October 1939 for the spring of 1940: fifty hulls as against forty turrets per month.[5]

At the time of acceptance in 1934, it had already been decided to order fifteen on 25 April 1934 and fifteen more on 20 May at a price of 275,000 per hull, more expensive than a French light infantry tank of the period. The actual orders were made on 1 January and 29 April 1935 respectively, and the notification sent on 27 May, with a planned delivery between January and March 1936.[4] Due to strikes, the first vehicles of these orders were only delivered from 2 February 1937 onwards; nineteen had been produced by April, the last delivered in November. The two first orders together can be seen as a separate preseries of thirty, differing slightly in many details from later produced vehicles.

A third order for eighty vehicles was made on 15 September 1935 but only notified on 11 August 1937. They were scheduled to be delivered between January and July 1938, but due to strikes and delays in the production of the turrets, the actual dates were 24 June 1938 and 10 February 1939.[6]

There were another three orders for which deliveries started before the war: one of forty dated 11 January 1938 and delivered between 13 February and 31 July 1939; a fifth of 35 cars made on the same date but delivered between July and December 1939 (six before the war) after a sixth order for eighty vehicles made on 18 January 1938 and delivered between June and November 1939 (57 before 1 September 1939).[7]

On 1 September 1939, 219 vehicles had been delivered including prototypes, 71 behind schedule. However, production increases soon allowed Panhard to reduce the backlog — at least for the hulls. From December, vehicles were produced from two later orders: a seventh of forty, made on 18 January 1938 and completed between December 1939 and April 1940; and an eighth of eighty vehicles delivered from January until the middle of May 1940. The monthly deliveries were: nine in September 1939, eleven in October, eighteen in November, twenty-two in December, twenty-five in January 1940, eight in February, sixteen in March, thirty-four in April and a final thirty in May 1940.[8] The total production of completed vehicles of the standard version of the AMD 35 for France was thus 339.

However, the total manufactured of all vehicles of the larger Panhard 178 family was much higher as there were several non-standard versions — and not all production was completed for France. Firstly, there was a radio command variant, twelve of which had been ordered in 1937 and again in 1938, the notification of which was issued on 9 December 1938, the 24 vehicles being delivered between October and December 1939. The next variant was a colonial version, eight of which were produced. The most important addendum consisted of an order for 128 modified vehicles destined for North-Africa. Furthermore, there were two last orders of the standard version, one of twelve notified on 22 July 1939, the second for a hundred made on 27 September 1939, of which both only fourteen hulls would be made for France.[7]

Of all these orders, at the time of the armistice in June, 491 had been completed. On 7 June, 52 hulls were in stock for which no turret was as yet available; probably by 22 June, another ten hulls were made for a total production of 553: 30 in 1937, 81 in 1938, 236 in 1939 and 206 in 1940. Total hull production of all versions had been: 24 in September 1939, 26 in October, 27 in November, 33 in December, 36 in January 1940, 40 in February, 32 in March, 42 in April, 32 in May and 24 until the interruption in the middle of June.[9] After the armistice, another 176 were completed, from prefabricated parts, for the German occupier, for a total of 729.[8]

These actual production numbers can be compared to the production plans. Before the war, it had been intended that war manufacture would be thirty per month. When war really broke out, it was soon realised that the need to raise new units, the replacement of older, worn out vehicles and the creation of a matériel reserve to compensate the loss of about 20% of the cars of a combat unit per month during a campaign, would necessitate a much higher production level, even when resorting to the expedient of fitting surplus hulls with older turrets. It had been planned on 10 October 1939 to bring production to forty per month in March, fifty in July, fifty-five in September and sixty from November 1940 for the duration of the war.[10] Later projections were even more pessimistic: accordingly, on top of the 657 vehicles notified at that date, on 15 April 1940 another 450 were ordered, a third of them of the radio version, bringing total orders to 1,107.[7] The desired peak rate of sixty vehicles was put forward with two months to September 1940; on 1 October, 1,018 vehicles had to be completed. However, the planned production was now limited to March 1941; as supreme commander Maurice Gamelin had concluded on 27 February 1940 from the events during Fall Weiss that lightly armoured vehicles could not survive on the modern battlefield, thus, from the spring of 1941, the Panhard 178 had to be replaced on the production lines by the heavy Panhard AM 40 P armoured car, which was to be much more heavily armoured and armed.[9]

Description

[edit]
The Panhard 178 from the right side

Design

[edit]

In order to function as an effective long-range reconnaissance vehicle, the Panhard 178 had been kept as light as possible. The vehicle was thus rather small, only 4.79 m (15 ft 9 in) in length, 2.01 m (6 ft 7 in) wide and 2.31 m (7 ft 7 in) in height (1.65 m for the hull per se). Also, the tapering engine compartment, where a Panhard ISK 4FII bis V4, 6332 CC, 105 hp[2] at 2000 rpm[11] motor had been installed, was built very low, giving the vehicle its distinctive silhouette, with a protruding fighting compartment. Both compartments were separated by a fireproof bulkhead.[12] The use of a large turret with 26 mm frontal armour and 13 mm side armour, combined with 7 mm[2] (bottom), 9 mm (top and glacis), 13 mm (back, sides and front superstructure) and 20 mm (nose) bolted and riveted armour plate for the hull,[6] had compromised weight considerations, however, so the vehicle still weighed 8.2 metric tonnes. However, the mobility was rather good for a French AFV of the period: a maximum speed of 72.6 km/h (45.1 mph), a cruising speed of 47 km/h (29 mph)[11] and a practical range of about 300 km (190 mi), made possible by two fuel tanks of 120 and 20 litres, the main one located at the extreme back of the hull.

However, rough terrain capacity was somewhat limited: though all four road wheels were actuated, the leaf spring suspension confined the off-road speed to 42 km/h and the possession of just four wheels allowed for a wading and a trench crossing capacity of only 60 cm; it could overcome a 30 cm vertical obstacle, assisted by two small bottom wheels in the front hull.[12]

The driver was in the front, using an eight-speed gear box and a normal steering wheel. Steering could be switched into reverse immediately to allow the assistant-driver, facing the rear[2] and seated to the left of the engine (or, from his point of view: the right), to drive the vehicle backwards in case of an emergency, using all four off-road gears, with a maximum speed of 42 km/h. This "dual drive" capacity is common for reconnaissance vehicles. The second driver had a separate entrance door at the left side of the hull. He doubled as a radio operator in the platoon commander or squadron commander vehicles, operating the short range ER29 or medium range ER26 set respectively. To make long-range communications possible, one out of twelve armoured cars was a special radio vehicle.

The APX3 turret

The APX3 turret, having a large double hatch on the back, was rather large and could accommodate two men, like with the AMC 35; this was at the time exceptional for French AFVs. In the electrically traversed APX3, the commander on the right and gunner on the left benefited from a rudimentary turret basket, and sufficient vision devices including one periscope (which were of the Gundlach type on late examples) per man and PPL.RX.168 episcopes.

Armament

[edit]

Armament was first intended to be a newly developed 20 mm gun; when this failed to materialise, it was considered to use a 37 mm Modèle 16 gun, standard for armoured cars, but this was rejected because of its poor anti-armour capacity. Instead, the 25 mm SA 35 was chosen,[2] a shortened L/47.2 derivation of the standard French antitank gun, the 25 mm Hotchkiss modèle 34. It was fitted with the L711 sight. To compensate for the shorter barrel, the rounds use heavier charges, giving even a slightly superior muzzle velocity of 950 m/s. The gun had a maximum penetration of about 50 mm when using a tungsten round; the light 380 gram projectile was easily deflected by sloped armour though, even a 45° angle giving about 100% extra protection over the armour thickness measured along the horizontal plane. German tanks had many vertical plates, however, and were vulnerable up to about 800 metres; on the other hand, the light round, even when penetrating, often failed to set fire to an enemy vehicle; it sometimes took fifteen shots to achieve this; 150 rounds of ammunition were stored.

The secondary armament was an optionally coaxial Reibel 7.5 mm machine gun,[2] with 3,750 rounds, 1,500 of which were armour-piercing. A reserve machine gun was carried to the right of the driver that could be mounted on top of the turret for anti-aircraft defence. Its magazines were carried on the inner walls of the fighting compartment, including the large main entrance door on the right.

Shortcomings and further improvements

[edit]

Experience showed that the type had several shortcomings: a weak clutch, slow turret rotation, a cramped interior, unreliable radio sets, poor cross-country drive and very noisy brakes. On the other hand, it was reliable, easy to drive on roads and the engine as such was rather silent; all desirable qualities for a reconnaissance vehicle.

During the production run, several modifications would be made, such as the fitting of lifting hooks. The first thirty vehicles had two more primitive periscopes on the turret roof, a Chrétien diascope on its front and simple vision slits with armoured shutters on its sides; their drivers too had to use vision slits instead of an episcope. They also lacked a silencer and had semi-circular cut-outs at the wheel plate edges. From about the 111th vehicle (or fourth production batch) onward, several changes were introduced, including the fitting of an armoured ventilator covering on top of the turret, a factory plate with the name "Panhard" on the nose and a new softer factory camouflage pattern with the brown and bronze green spots no longer separated by black lines.[13] From the 270th vehicle onwards stowage boxes were constructed on the back fenders, obscuring the pointed form of the engine compartment. The last turrets produced also had a backward pointing episcope for the commander, instead of a vision slit.[14]

Operational history

[edit]
A destroyed Panhard 178 of the 3rd Division Légère de Cavalerie, May 1940

The first nineteen vehicles were in April 1937 taken into service by 6e Cuirassiers. At the outbreak of the Second World War 218 vehicles were fielded with eleven squadrons.

In the spring of 1940, 21e Escadron d'AMD 35 was first destined for Finland and the Winter War but then sent to Narvik to assist Norway during Weserübung. It was in fact the renamed 4e GRDI (that would be replaced by a new unit of the same name in its former parent 15th Mechanised Infantry Division on 5 May) and was equipped with thirteen Panhard 178s.[15]

During the Battle of France from 10 May 1940, on which date about 370 completed vehicles were available,[11] the Panhard 178s were allocated to reconnaissance units of the mechanised and motorised forces.[2] At the time, the Panhard 178 represented one of the best armoured cars in its class in the world.[2]

The Cavalry's three armoured divisions, the Divisions Légères Mécaniques, had a nominal organic strength of forty armoured cars, plus four radio vehicles and an organic matériel reserve of four vehicles. This would make for a total of 144 in these mechanised light divisions. The Cavalry's Light (i.e. motorised) Divisions, the Divisions Légères de Cavalerie, had a squadron of twelve Panhards plus a radio car and a matériel reserve of four in their Régiment de Automitrailleuses (RAM). The total in the Cavalry Light Divisions would thus be 85.

The type was not just used by the Cavalry; the Infantry employed them in the GRDIs or Groupes de Reconnaissance de Division d'Infanterie,[2] the reconnaissance units of the Divisions d'Infanterie Mécaniques, which (despite their name) were largely motorised infantry divisions. These were 1er GRDI for 5e DIM, 2e GRDI for 9e DIM, 3e GRDI for 12e DIM, 4e GRDI for 15e DIM, 5e GRDI for 25e DIM, 6e GRDI for 3e DIM and 7e GRDI for 1e DIM. Their organisation was basically identical to the units of the DLCs, but the strength was sixteen, making for a total of 112 vehicles.

A Panhard 178 of the 2e GRDI destroyed in May 1940

The actual strength of above units might differ, but if all were on strength 24 vehicles were present in the matériel reserve or used for driver training, as apart from colonial vehicles, 378 had been delivered on 10 May 1940.[15] After the start of the invasion, several emergency ad hoc units were formed; these included the 32e GRDI for the regular 43e DI, having five Panhards. The 4e DCR, the armoured division of the Infantry hastily assembled in May, got 43 Panhard 178s.

The DLMs used their Panhard units for strategic reconnaissance. In the case of 1DLM, this entailed a movement well in advance of the main body of the division as it was supposed to maintain a connection with the Dutch Army during the Battle of the Netherlands. Within 32 hours, the armoured cars of the group Lestoquoi covered a distance of over 200 kilometres reaching the environment of 's-Hertogenbosch in the afternoon of 11 May. After some successful skirmishes with German armoured cars belonging to the reconnaissance platoons of the German Infanterie Divisionen, they withdrew, as the Dutch were already in full retreat. They were asked by the Dutch to assist an infantry attack on the southern bridgehead of the strategic Moerdijk bridges, held by German paratroopers. As the cars were not suitable for such a task, the commander hesitated after incorrectly concluding the bridgehead was strongly defended. While thus being immobile, this group of Panhards was surprised in open polder landscape by a Stuka-attack with one vehicle disabled and quickly withdrew to the south.

The other two DLMs hurried forward to stop the advance of 3 and 4PD after the surprisingly swift fall of Fort Eben-Emael, their Panhards fighting a successful delaying battle against their German counterparts until the Battle of Hannut, the largest tank battle of the campaign. In general, they had little trouble in dispatching the lightly armoured German armoured cars, whose 20 mm main armament was not very effective against the Panhard frontal armour.

Panhards in German use

As the type was well-suited to German tactics, at least 190 Panhards, most of them brand-new, were issued to German reconnaissance units[2] for use in Operation Barbarossa in 1941 under the designation of Panzerspähwagen P204 (f); 107 would be lost that year. Among these were some radio vehicles, designated Panzerspähwagen (Funk) P204 (f). Thirty Panhards were listed as in use on the Eastern Front on 31 May 1943. Some of these were fitted with spaced armour.

After the liberation of France, the 1e Groupement Mobile de Reconnaissance would, among a bewildering variety of types, also use some Panhard 178s, some of these modified.

Modified Panhards

[edit]

Radio vehicles

[edit]

The Panhard units were intended for deep strategic reconnaissance and thus could be expected to operate well in advance of the main forces. To fulfil their task of relaying information, long range radio connections were necessary. Therefore, one in twelve vehicles had to be of a special radio "command" version (Poste Commande) with the turret fixed in place and without armament but equipped with the ER27 set, giving a range of 80 - 150 kilometres, and two ER26ter sets with a range of sixty kilometres for communications within the squadron.

A dozen "PC vehicles" had been ordered in both 1937 and 1938, the number of 24 being notified on 9 December 1938. The first was planned to be delivered in February, but only materialised in October 1939, followed by seventeen in November and six in December. They were rebuilt with the ER 27 set in the Fort d'Issy. As this number was clearly insufficient to equip all units, on 15 April 1940 an additional 150 PCs were ordered, bringing the total to 174; none of the new order had been built before the armistice.[15]

North African version

[edit]

From 14 to 29 October 1936,[16] the original Panhard 178 prototype, leaving Bordeaux on 15 September,[12] was tested by the 6e Cuirassiers in Morocco, successfully negotiating about three thousand kilometres of desert and mountain tracks,[16] resulting in an acceptance of the type for desert use on 15 January 1937, though a suitable modification was advised, including the fitting of a lighter turret.

The North African forces were in need of two reconnaissance armoured car types: a light one, for which role the Laffly S15 TOE was envisaged, and a heavy one, the automitrailleuse lourde, for which the Panhard 178 was chosen. Initially it was planned to uparm the vehicle, at first with a 37, then a 47 mm gun, but on 14 January 1939 the quickly deteriorating international situation forced the acceptance of a variant, the AMD 35 type Afrique française du Nord, not very different from the standard version: apart from small internal fittings changes, the main difference was the installation of a heavy duty radiator, better adapted to the hot desert climate of the North African colonies.[15]

Two orders had been made on 3 June 1938, one of twenty and another of twelve vehicles. A third order of 96 cars was dated 3 February 1939; it was intended to raise eight squadrons in Africa, each of sixteen vehicles. The first of these orders was only notified on 26 May 1939. Construction on the vehicles started in December but had to be halted due to a lack of the special radiators, 161 of which had only been ordered on 10 October; eventually, they were manufactured from the second week of May 1940, at this time forming the main bulk of Panhard 178 production: 78 were delivered that month. On 7 June, of the 128 ordered, 71 had been delivered, two were present in a completed form in the factory stock, and 39 hulls were ready lacking a turret.[7] Until the armistice at least another 41 were delivered, for a minimal total of 112 AMD 35 AFNs.[8] None of these vehicles would in fact be shipped to North Africa; they were used by newly raised (especially 10e Cuirassiers, part of Charles de Gaulle's 4e DCR), reconstituted or ad hoc-units in France.[15]

Colonial version

[edit]

On 14 September 1938, an order was notified of four vehicles for colonial use in Indo-China, equipped by ARL with the smaller one-man APX5 turret, as used on the AMR 35 ZT2, armed with a 25 mm gun and 7.5 mm machine-gun. The crew thus consists of three men. Two of these were delivered in June 1939, the other two the next month. These first four left for Indo-China on 12 October; at least one was captured by Japan. A second order of four for colonial Panhard 178s was notified on 10 June 1939; one was delivered in December 1939; the last three in January 1940, bringing the final total for this version to eight.[15] The last four vehicles were still in France at the time of the German invasion and were issued to the army in June despite lacking their turrets,[11] and some, probably still without their turrets, were clandestinely incorporated by the Vichy forces after the armistice.[15]

Tank Destroyer variant

[edit]

Though sufficient at a short range, the effectiveness of the 25 mm gun was far from optimal. On 14 January 1939, it was in principle decided to arm the Panhard with the 47 mm SA 35 gun but as this ordnance was in short supply priority had to be given to uparming tank types still equipped with the SA 34 gun, such as the Char B and the first Char D2 series.[17] In the autumn of 1939, the building of a number of tank destroyers was already being considered, as too few units had a motorised anti-tank capacity. n April 1940, Panhard proposed its Voiture spéciale 207, basically a Panhard 178 fitted in the back with a rearward-facing powerful 47 mm SA 37 gun.

This type was still in development when the crisis in May and the lack of APX3 turrets — Cail had been overrun and it had been decided to deliver most vehicles as "turretless AMDs" to the troops — led to an emergency programme to fit the surplus hulls with a new turret type. On 29 May 1940, Renault was contacted and quickly initial ideas of improvising an open-topped turret for a 25 mm gun grew into a new closed turret, a design by Engineer Joseph Restany, capable of holding the much more powerful standard 47 mm SA 35 tank gun, a first version of which was finished on 31 May. To provide enough room to operate the larger gun, the back of the new octagonal turret was raised, resulting in an extreme wedge-shaped profile. The armour consisted of welded 25 mm plates all-around, reinforced on the front with a spaced[17] appliqué 13 mm plate.[9] The turret had a single rather narrow top hatch and lacked the rear hatch that had been usual for French designs. The turret had to be rotated by hand, an electrical drive being absent. Also, a machine-gun was lacking.[17] A single vehicle was tested on 5 June and completed on 6 June, but plans to build forty vehicles of the type from 11 June at a rate of four a day came to naught, despite an official order on 13 June,[11] and the intention of attaining a monthly production of thirty-five from August onwards,[17] as Paris was declared an open city on 10 June and the factory evacuated on 12 June. The single vehicle, provisionally called the Voiture 47,[11] was allocated to 1er RAM on 6 June and, on 15 June, defended a bridge near Etignie, destroying two German "heavy tanks" (of an unspecified type) and a column trying to force a crossing. On 17 June, 10:00, it was destroyed by its own crew at Cosnes-sur-Loire when their unit was unable to cross the Loire river with its heavy equipment.[9]

On 2 June, it was hoped to mount a 47 mm SA 34 or a 25 mm gun on the "turretless AMDs", protected by a superstructure made of 16 to 20 mm armour plate. Photographic evidence proves that at least one vehicle was fitted with a superstructure but not whether this was armed. Additionally, a few could probably be equipped with a gun shield for a machine gun, most being issued as pure hulls.[17]

Modifications by Germany, Vichy France and Italy

[edit]
A Panhard modified as Schienenpanzer

After 1941, the Germans modified 43 cars as railway-protection vehicles (Schienenpanzer); they could drive on the tracks themselves by means of special wheels and were fitted with large radio frame aerials.

Under the armistice conditions, the Vichy regime was allowed to use 64 Panhards for police service. These vehicles, mainly taken from the May–June production batches,[8] had their guns removed and replaced with an additional machine gun. On orders of the Army, the Camouflage du Matériel branch, Engineer J. Restany, using the false name "J-J. Ramon", from April 1941 clandestinely produced 45 new turrets, fitted with a 47 mm SA 35 (about twenty) or a 25 mm gun in order to equip an equal number of hulls hidden from the Germans; some were eventually combined with the hulls for trial purposes. The turrets were of a new design but strongly resembled Restany's 47 mm turret of June 1940. They used 20 mm armour plates for the vertical surfaces and 10 mm plate for the top. To the top hatch, a rear hatch was added. On 28 January 1942, all turrets had been finished. Later, a 7.5 mm FM 24/29 machine-gun was fitted to the right of the main armament.[17] These hulls and cars were partly hidden or dumped in lakes when the whole of France was occupied in November 1942. Some vehicles, however, were used by the Germans in the Sicherungs-Aufklärungs-Abteilung 100. In the summer of 1944, some were perhaps taken into use by the resistance.[17]

In 1944, some of the 34 Panhards captured by the Germans when they overran Vichy-France in November 1942, were rebuilt with the 5 cm KwK 38 L/42 or 5 cm PaK 38 L/60 gun in an open-topped turret and used for occupation duty. In November 1942, the Italian Army also captured two Panhards, which would be used by them until September 1943.

Panhard 178B

[edit]
A Panhard 178B in Vietnam

In late 1944, a new turret was designed by Fives Lille, the FL1. It had a cylindrical "camembert"[17] form allowing for more space to install the larger 75 mm SA 45 L/32 gun.[18] The type with the new turret, a new four cylinder engine and the EM3/R61 radio set was named Panhard 178B and taken into production at Firminy; a first order of 150 was made on 5 January 1945 and confirmed on 31 July 1945. However, before actual manufacture started, it was decided to fit the smaller 47 mm SA 35 gun and a machine gun. In total, 414 vehicles were manufactured, making for a grand total of 1,143 Panhard 178 cars. In contradistinction to this Panhard 178B, older vehicles are sometimes designated Panhard 178"A", though this designation is not contemporary. The B-version was used in France and the colonies, such as Syria,[19] Tahiti, Madagascar[17] and Vietnam. The last French use was in Djibouti in 1960 by the 15e Escadron Blindé d'Infanterie de Marine; Syria still used the type in February 1964 during the uprising in Damascus.

Notes

[edit]

Sources

[edit]
  • White, B.T., 1972, Tanks and other Armoured Fighting Vehicles of World War II, Peerage Books, London ISBN 0 907408 35 4
  • Pierre Touzin, Les véhicules blindés français, 1900-1944, EPA, 1979.
  • Pierre Touzin, Les Engins Blindés Français 1920-1945, Volume 1, SERA, 1976.
  • Leland Ness (2002) Jane's World War II Tanks and Fighting Vehicles: The Complete Guide, Harper Collins, London and New York, ISBN 0-00-711228-9
  • Pascal Danjou, 2004, L'Automitrailleuse de Découverte AMD 35 Panhard 178, Editions du Barbotin, Ballainvilliers
  • François Vauvillier, 2008, "Produire l'AMD 35 Panhard: une affaire d'équipe", Histoire de Guerre, Blindés & Matériel, N° 82, p. 36-45
  • Erik Barbanson, 2008, "J'ai piloté le prototype de l'AMD Panhard au Maroc", Histoire de Guerre, Blindés & Matériel, N° 85, p. 76-80
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
from Grokipedia
The , officially designated as the Automitrailleuse de Découverte modèle 1935 (AMD 35), was a French four-wheeled armored developed in the early and renowned for its innovative design, including a rear-mounted , all-wheel drive, and a distinctive octagonal turret housing a 25 mm high-velocity gun. Weighing approximately 8.2 tonnes with armor up to 20 mm thick, it achieved a top road speed of 72 km/h and a range of 300 km, making it one of the most advanced armored cars of its era for cavalry scouting duties. Development of the Panhard 178 began in 1931 in response to French cavalry requirements for a fast, long-range capable of carrying a crew of four and mounting anti-tank weaponry, with final specifications issued in November 1932 calling for a 4-ton , 70 km/h speed, and at least 8 mm armor protection. et Levassor, building on its legacy of armored vehicle production dating back to , delivered a in 1933 that underwent testing and modifications before acceptance in 1934, leading to initial deliveries in 1935 from the company's Reims factory. Powered by a 105 hp four-cylinder gasoline engine, the vehicle measured 4.79 m in length, 2.01 m in width, and 2.31 m in height, with standard armament consisting of a 25 mm Hotchkiss SA-35 and a 7.5 mm , though some later variants featured upgraded 37 mm or 47 mm guns. Production ramped up from 1937, yielding 339 units by May 1940 and a total of around 429 by the time of the Franco-German armistice, with German occupation forces overseeing an additional 300 completions using existing hulls. Variants included the initial Model A with an angular hull, the improved Model B introduced with a more rounded design and option, specialized colonial models for , and captured German redesignations like Panzerspähwagen P204(f). In service, the Panhard 178 equipped French mechanized cavalry squadrons during the 1940 Battle of France, where its speed and firepower proved effective in reconnaissance despite the rapid German advance, and it also saw limited action in the Norwegian Campaign. Over 200 were captured by German forces and repurposed for security, anti-partisan operations, and even the Eastern Front during Operation Barbarossa, while Vichy French units retained a small number until 1942. Post-liberation, surviving examples served the Free French in colonial conflicts, including Syria in 1945 and the First Indochina War until at least 1960, underscoring its enduring reliability and adaptability.

History

Development

In the early , the French Cavalry sought to modernize its capabilities amid interwar military doctrines that prioritized speed and mobility for scouting roles over heavy armor, influenced by lessons from and the need to counter potential threats from and . This led to the formulation of specifications for an Automitrailleuse de Découverte (), or armored car, emphasizing long-range operations in diverse terrains including European battlefields and colonial outposts. The program aimed to replace outdated vehicles like the Laffly-White armored car with a versatile 4-ton platform capable of 70 km/h top speed, 400 km range, 8 mm armor, and a 20 mm gun for engaging light targets. The design process began with specifications set in late 1932 when & Levassor, leveraging its automotive expertise, was selected alongside competitors , , and Latil to develop prototypes under the finalized November 1932 specifications from the French Army's Direction des Études et Fabrications d'Armement (). 's prototype, designated Type 178, was completed in October 1933 and featured a provisional turret armed with a 13.2 mm for initial evaluations. Extensive trials followed from early 1934, with further testing and modifications through 1937, during which the vehicle exceeded the weight limit at 8.2 tons but demonstrated superior performance in mobility tests conducted by cavalry units, including off-road handling and reverse driving capabilities. No specific individual designers are prominently credited, though the project was led by engineers in collaboration with army overseers. Key technical innovations in the Panhard 178 included its pioneering all-wheel-drive (4x4) system with a rear-mounted 105 hp , enabling effective traction across varied surfaces as the first such armored car in series production. It incorporated independent leaf-spring suspension on all four wheels for enhanced ride quality and cross-country agility, while the hull and turret employed sloped armor plating—up to 26 mm on the frontal hull and 20 mm on the turret face—for improved ballistic protection against and shrapnel without excessive weight. These features addressed the cavalry's doctrinal emphasis on rapid, independent , setting the vehicle apart from wheeled competitors that relied on less advanced drivetrains. Following successful trials, the Panhard 178 was officially accepted in 1934 as the AMD Panhard Modèle 1935 (AMD 35), selected over rival prototypes due to its balanced combination of speed, firepower, and innovative engineering that better met the army's mobility-focused requirements. The initial order in December 1934 was for 30 vehicles, with the first deliveries reaching the 6e Régiment de Cuirassiers in April 1937, marking the start of its integration into light mechanized divisions (DLM) and reconnaissance groups (GRDI). This adoption reflected the French Army's confidence in Panhard's design as a doctrinal fit for modern operations.

Production

Production of the 178 commenced at & Levassor factories in , primarily at the factory, beginning in 1937 following the vehicle's acceptance into service. By May 1940, 339 units had been delivered, with manufacturing ramping up to a total of 429 Model A units completed for French forces by the armistice; the full production of 729 Model A units includes approximately 300 additional completions overseen by German occupation forces using existing hulls. Each hull costing approximately 275,000 French francs. The design incorporated existing automotive components from 's civilian production lines, such as the four-cylinder SK , to streamline assembly and reduce development time. Production was disrupted by labor shortages stemming from military mobilization and strikes in the late 1930s, which delayed output alongside turret supply issues from manufacturer APX. The German invasion in June 1940 halted all manufacturing under the armistice terms, though some incomplete hulls were finished under occupation for German use. Following the liberation of France, production resumed at Panhard facilities in late 1944, yielding 414 Model B units by 1946, which featured upgraded turrets and engines while retaining the core chassis. Overall, 1,143 vehicles were produced across all variants, with no significant pre-war exports despite considerations for colonial deployments.

Design and Specifications

Chassis and Mobility

The Panhard 178 employed a dedicated armored with an integrated frame and body, utilizing a rear-mounted layout to optimize and internal space for its role. This 4x4 wheeled configuration incorporated suspension on rigid axles for all four wheels, providing a balance of stability and ride quality suited to rapid scouting missions across varied European terrains. Overall dimensions measured 4.79 meters in length, 2.01 meters in width, and 2.31 meters in height, contributing to its compact profile, while the combat weight reached 8.2 tonnes when fully loaded. Power came from a rear-mounted ISK 4F II bis four-cylinder inline gasoline engine, liquid-cooled and producing 105 horsepower at 2000 rpm, paired with a four-speed gearbox offering forward and reverse gears for versatile operation. On roads, the vehicle achieved a top speed of 72 km/h, dropping to approximately 40 km/h off-road, enabling effective pursuit and evasion in scenarios. The drivetrain's all-wheel drive system enhanced traction, with an operational range of 300 km supported by a 145-liter capacity, though consumption varied with and load. Mobility was further aided by front-axle with a tight of 8 meters, allowing agile maneuvers in confined spaces, complemented by a dual-drive capability that permitted quick reversal using a secondary at the rear for rapid retreats without turning. Ground clearance stood at 0.35 meters, facilitating moderate cross-country performance while the 3.12-meter and 1.73-meter track width ensured handling stability. The armor consisted of sloped plates ranging from 7 to 20 mm thick on the hull and turret, angled to deflect small-arms fire and shrapnel effectively without compromising the vehicle's speed-focused design.

Armament and Protection

The primary armament of the Panhard 178 consisted of a 25 mm SA 35 low-pressure semi-automatic cannon mounted in a one-man APX-R turret, designed for engagements against light armor and . This Hotchkiss-derived gun fired 25 × 163 mmR projectiles at a of around 880 m/s, offering an effective range of up to 800 m and penetration capability of approximately 40 mm of armor at 500 m under typical combat angles with armor-piercing rounds. The vehicle typically carried 150 rounds of 25 mm , stored in the turret and hull for rapid reloading during mobile operations. Complementing the main gun was a coaxial 7.5 mm Reibel Mle 1931 , chambered for 7.5 × 54 mm MAS rounds, with a total stowage of 3,750 rounds (including 1,500 armor-piercing variants for anti-personnel and light vehicle suppression). An optional 7.5 mm could be mounted on the turret roof for anti-aircraft defense, though it was not standard on all units. These weapons emphasized the vehicle's in , where its mobility enabled quick repositioning to bring fire on targets before evading counterfire. Protection relied on riveted and welded armor plates varying in thickness from 7 mm on the hull bottom and roof to 26 mm on the hull and up to 20 mm on the turret front, providing resistance to 7.92 mm small-arms fire and shell fragments but vulnerability to heavier anti-tank rounds. The sloped turret sides (13 mm thick) and hull flanks (13-15 mm) offered modest deflection against oblique impacts, suitable for rather than direct combat. No nuclear, biological, or chemical () protection was incorporated, as the design predated such threats. For targeting and , the commander/gunner utilized a telescopic L.711 sight integrated into the turret for the main , supplemented by Gundlach and standard periscopes for 360-degree observation. The driver employed PPL RX 160 episcopes and vision slits with protective shutters, while early models included Chrétien diascope night-vision aids (later phased out). Communication was facilitated by standard French ER 26 medium-range and ER 29 short-range radio sets, operated by the rear-facing second driver/radio operator to coordinate with units during .

Crew Accommodations and Limitations

The Panhard 178 was operated by a crew of four: a , a , a gunner-loader, and a . In missions, the directed vehicle movement and overall operations from the turret, the handled forward navigation and propulsion from the front hull position, the gunner-loader managed the main armament and supply within the turret, and the maintained communications using equipment like the ER26 or ER29 sets in command variants while also serving as a rear-facing driver for rapid retreats. The interior layout featured a divided hull with the in the rear, creating a compact compartment forward of it. The driver occupied a central front position protected by a hinged, slotted armored panel for , while the sat in the rear hull facing backward to enable reverse driving at speeds up to 42 km/h without turning the vehicle. The two-man turret, an APX-R model with full 360-degree manual traverse, accommodated the and gunner-loader above the central fighting area, with access via side hull doors and roof hatches. Ventilation was initially basic but included a turret fan in later models to mitigate heat buildup. Key limitations arose from the vehicle's compact , which resulted in a cramped interior that restricted movement and contributed to during extended patrols. Early production models experienced interior overheating, particularly in hot climates, leading to discomfort and reduced ; this was partially addressed in through the addition of a main gun silencer, improved turret ventilation, and a dedicated ventilator system. The all-wheel-drive mechanism and rigid suspension, while enhancing mobility, presented maintenance challenges due to their complexity, requiring specialized tools and time that strained field amid the rushed development priorities of French rearmament program. Additionally, the small vision slits in the turret limited , often forcing the to balance observation duties with command responsibilities, thereby overloading personnel in dynamic scenarios. Minor field modifications, such as ad-hoc ventilation enhancements and suspension adjustments, were attempted during production to alleviate these issues, but the core constraints persisted from the era's emphasis on speed and over .

Operational History

World War II Service

The Panhard 178 first saw combat in the Norwegian Campaign of 1940, where a squadron of 13 vehicles was deployed with French forces at Narvik for reconnaissance duties. The Panhard 178 entered service with the French Army in 1937, primarily equipping reconnaissance squadrons within light mechanized divisions (DLMs) and reconnaissance groups of infantry divisions (GRDIs). By May 1940, over 370 vehicles were operational, distributed across 28 reconnaissance groups (including GRDIs, GRMs, and GRDs), with each typically including about 13 Panhard 178s alongside lighter armored cars and motorcycles for deep reconnaissance tasks. During the (May–June 1940), the Panhard 178 proved valuable in roles, particularly in engagements in the and , such as at 's-Hertogenbosch and Hannut, where its speed and 25 mm gun allowed it to outmaneuver and engage German 20 mm-armed vehicles effectively. Its all-wheel-drive mobility facilitated rapid screening and support for retreating French forces amid the German , though the vehicle's limited numbers—relative to the scale of the invasion—hindered broader impact on the campaign's outcome. Many were abandoned or destroyed during the chaotic withdrawal to and southward retreats. Following the Fall of France, German forces seized approximately 190 Panhard 178s, redesignating them as Panzerspähwagen P204(f) for continued use in reconnaissance and security operations. These captured vehicles were integrated into units like the 20th Panzer Division and Panzer-Aufklärungs-Abteilung 37, with some fitted with German radios and antennas; they served in occupied France for policing duties, on the Eastern Front during Operation Barbarossa (where 107 were lost in 1941 alone), and along the Atlantic Wall for coastal defense patrols. A portion were converted for rail reconnaissance, pairing with armored trains to secure supply lines. Under French control, around 64 178s remained in mainland service for internal security, with their main guns replaced by machine guns per terms; these saw limited action in the 1941 Syria-Lebanon Campaign against Allied forces, supporting counterattacks alongside other light armor. In November 1942, Italian forces captured two 178s during the occupation of the zone in southeastern and repurposed them with minor modifications—such as adapted radios—for reconnaissance in , though their employment was sporadic due to low quantities and logistical challenges. The Panhard 178 excelled in against and light targets, leveraging its quiet engine, road speed of up to 72 km/h, and effective short-range firepower, but it was vulnerable to anti-tank guns and struggled off-road due to a weak and narrow tracks. Overall WWII losses exceeded 400 vehicles across all users, including attrition, captures, and mechanical failures.

Post-War Deployments

Following , the Panhard 178 remained in service with the , primarily in colonial theaters where its reconnaissance capabilities proved valuable despite its aging design. Approximately 34 vehicles per regiment equipped armored units in overseas territories, including adaptations for local environments such as enhanced cooling systems to combat high humidity and temperatures. In the (1946–1954), 178s, often the up-gunned 178B variant, were deployed by French cavalry regiments like the 5e Régiment de Spahis Marocains for patrols along supply routes and jungle reconnaissance in areas such as . These vehicles supported mobile operations but faced challenges from tactics, including ambushes with captured Japanese or Soviet anti-tank weapons that led to several losses. By the war's end in 1954, some surviving Panhard 178s were captured by Viet Minh forces and repurposed for their own reconnaissance roles, extending their use into the subsequent . During the (1954–1962), the Panhard 178 continued limited service with French forces in , conducting urban patrols and desert scouting missions in support of counter-insurgency efforts. Its mobility suited the varied terrain, though it was increasingly supplemented and then replaced by more advanced wheeled reconnaissance vehicles like the . French retirement of the Panhard 178 from active duty occurred by the mid-1960s, marking a total operational lifespan exceeding 25 years from its 1937 introduction. Exports extended the vehicle's life elsewhere; following independence in 1946, received a batch of Panhard 178B models from French stocks and employed them in the 1948 Arab-Israeli War before phasing them out in the early 1960s in favor of Soviet-supplied armor. Post-retirement, surviving examples entered military museums, such as the in , , where they illustrate early 20th-century armored design and served in training simulations until the 1970s.

Variants and Modifications

Specialized French Variants

The French Army adapted the Panhard 178 for specialized command roles by converting a number of vehicles into radio-equipped variants, primarily for use in cavalry groups to enhance coordination during reconnaissance operations. Approximately 28 such command vehicles were produced, fitted with long-range SCR-508 radios and additional antennas to facilitate communication over extended distances, while retaining the standard chassis and armament for mobility and self-defense. These modifications allowed the vehicles to serve as mobile headquarters, supporting divisional command structures in the lead-up to World War II. For operations in arid environments, the French developed a desert-adapted version of the Panhard 178 specifically for North African deployments, with around 128 units modified and delivered prior to 1940. Key adaptations included heavy-duty radiators to cope with high temperatures, sand filters for the engine to prevent clogging in dusty conditions, extra cans, and wider tires for improved traction on loose sand, all while maintaining the vehicle's core 4x4 mobility and 25 mm Hotchkiss SA 35 main gun. These vehicles were assigned to units in , such as those in and , to support colonial garrison duties and border patrols against potential threats from Italian forces in . A limited colonial variant was prepared for service in , where environmental challenges like humidity and tropical terrain necessitated further customizations; eight vehicles were dispatched starting in 1939, equipped with the smaller ZT-2 turret carrying a 7.5 mm for lighter roles. Modifications included mosquito netting over vents to protect against insects, reduced armor thickness in non-vital areas to lighten the load for better performance on poor roads, and enhanced rust-proofing for the humid climate, prioritizing endurance over heavy combat capability. These units bolstered French colonial defenses in until the Japanese invasion in 1941, when at least one was captured. In response to evolving anti-tank requirements, a rare prototype was tested in 1939, featuring an enlarged Renault turret mounting the more powerful 47 mm SA 35 low-pressure gun on a single to provide greater against armored threats. This open-top configuration allowed for the larger weapon but compromised crew protection, and while initial trials were promising, the outbreak of war prevented mass production; only one such vehicle entered combat in June 1940 with the 1st Division, where it demonstrated improved penetration capabilities over the standard 25 mm armament before being lost.

Captured and Foreign Adaptations

During , the captured numerous Panhard 178 armored cars from French forces, leading to various modifications for their own use. The Germans designated captured vehicles as Panzerspähwagen P204(f) and incorporated approximately 190 into service, primarily for reconnaissance and security roles. These included upgrades to FuG 10 or FuG 11 radios for better interoperability with communications, though many retained the original 25 mm Hotchkiss SA 35 gun and 7.5 mm ; some were fitted with a single machine gun. Around 117 of these were deployed on the Eastern Front starting from in 1941, where they supported panzer divisions in units like Panzer-Aufklärungs-Abteilung 37 and 92, suffering heavy losses with 109 reported destroyed by the end of 1941; some continued in rear-area security duties until 1943. Additionally, a small number were converted for anti-tank roles by mounting a 45 mm 20-K gun in place of the turret armament, enhancing their utility against Soviet light armor. In the unoccupied zone under French control, standard 178s saw combat in the 1941 Levant Campaign, where forces in and deployed them against British and Free French advances during Operation Exporter, providing reconnaissance support before the region's surrender in July 1941. Later modifications were made to comply with restrictions, including the development of CDM (Camionnette de Maintien de l'Ordre) turrets starting in late 1941, with armor thickness up to 20 mm on front, sides, and rear, and minor hull adjustments for compatibility. Engine tweaks focused on reliability for the existing 105 hp four-cylinder unit. These later adapted vehicles were used for police duties until captured by in 1942. Italian forces captured a small number of 178s during operations in , particularly in following the Allied landings in November 1942. These were employed in and roles by Italian motorized units in the until the Axis surrender in May 1943, though their light armor limited effectiveness against Allied armor. Post-war, captured or transferred Panhard 178s saw limited foreign service, with no major Italian or German uses after 1945 due to rapid obsolescence against modern threats. In , inherited vehicles from French mandate stocks were upgraded with Soviet optics, such as simple periscopes and sights from suppliers, to extend their utility into the 1950s and early 1960s, including brief involvement in the 1948 Arab-Israeli War.

Panhard 178B

The 178B represented a redesign of the original model, initiated in 1944 and entering production in 1945 to incorporate lessons learned from combat experience. A total of 414 units were manufactured at a reduced cost compared to pre-war production, enabling broader deployment while utilizing domestically available materials. It featured an optional for improved endurance. Key modifications included a larger turret ring to accommodate the new FL1 turret designed by Fives-Lille, allowing for improved firepower without major alterations. The 178B's upgraded armament featured the FL1 turret typically mounting a 47 mm SA 35 low-pressure gun, though the prototype was equipped with a 75 mm SA 45 L/32 gun for enhanced anti-tank capability. Ammunition storage was increased to support sustained engagements, complemented by an improved coaxial 7.5 mm for close-range defense. These changes addressed limitations in the original model's firepower, providing better penetration against contemporary threats. Mobility remained a strength, with the retained 4x4 wheeled featuring reinforced suspension to handle the added turret weight. Protection was bolstered to a maximum of 20 mm armor thickness on critical areas, offering resistance to and shell splinters. The vehicle achieved a top speed of approximately 70 km/h on roads and an operational range of 300 km, suitable for roles in varied terrains. In service, the 178B saw deployment in French colonial operations, including Indochina and , where it supported and security missions. Exports were made to allied nations to bolster post-war defenses. The model was fully retired from French forces by 1969, with several surviving examples preserved in military museums for historical study.

References

Add your contribution
Related Hubs
User Avatar
No comments yet.