Recent from talks
Nothing was collected or created yet.
Red Bull RB9
View on WikipediaThe RB9 driven by Sebastian Vettel during the Malaysian Grand Prix | |||||||||||
| Category | Formula One | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Constructor | Red Bull | ||||||||||
| Designers | Adrian Newey (Chief Technical Officer) Rob Marshall (Chief Designer) Steve Winstanley (Chief Engineer, Composites and Structures) Dave Worner (Chief Engineer, Mechanics and Suspension) Mark Ellis (Chief Engineer, Performance) Giles Wood (Chief Engineer, Simulation and Analysis) Peter Prodromou (Chief Engineer, Aerodynamics) Dan Fallows (Chief Aerodynamicist) | ||||||||||
| Predecessor | Red Bull RB8 | ||||||||||
| Successor | Red Bull RB10 | ||||||||||
| Technical specifications[1] | |||||||||||
| Chassis | Carbon fibre Composite monocoque structure, designed and built in-house, carrying the Renault V8 engine as a fully-stressed member. | ||||||||||
| Suspension (front) | Aluminium alloy uprights, carbon-composite double wishbone with springs and anti-roll bar, multi-matic dampers | ||||||||||
| Suspension (rear) | Same as front | ||||||||||
| Length | 5,080 mm (200 in) | ||||||||||
| Width | 1,800 mm (71 in) | ||||||||||
| Height | 950 mm (37 in) | ||||||||||
| Wheelbase | 3,100 mm (122 in) | ||||||||||
| Engine | Mecachrome-built Renault RS27-2013 2.4 L (146 cu in) V8 (90°). Naturally aspirated, 18,000 rpm limited with KERS, mid-mounted. | ||||||||||
| Transmission | Red Bull Technology Seven-speed, longitudinally mounted with hydraulic system for power shift and clutch operation. AP racing clutch. semi-automatic hydraulic paddle shift gearbox including reverse. | ||||||||||
| Power | 750 hp (560 kW)[2] | ||||||||||
| Weight | 642 kg (1,415 lb) including driver and fuel | ||||||||||
| Fuel | Total 94.25% 102 RON unleaded gasoline + 5.75% biofuel | ||||||||||
| Lubricants | Total Quartz 7000 | ||||||||||
| Brakes | Brembo callipers. Carbon discs and pads | ||||||||||
| Tyres | Pirelli P Zero radial dry slick and Pirelli Cinturato intermediate-wet treaded tyres[3] O.Z. Racing forged magnesium alloy wheels.front: 12.0in x 13in diam., rear: 13.7in x 13in diam. | ||||||||||
| Competition history | |||||||||||
| Notable entrants | Infiniti Red Bull Racing | ||||||||||
| Notable drivers | 1. 2. | ||||||||||
| Debut | 2013 Australian Grand Prix | ||||||||||
| First win | 2013 Malaysian Grand Prix | ||||||||||
| Last win | 2013 Brazilian Grand Prix | ||||||||||
| Last event | 2013 Brazilian Grand Prix | ||||||||||
| |||||||||||
| Constructors' Championships | 1 (2013) | ||||||||||
| Drivers' Championships | 1 (2013, Sebastian Vettel) | ||||||||||
The Red Bull RB9 is a Formula One racing car designed by Adrian Newey for Red Bull Racing to compete in the 2013 Formula One season.[6][7] The car was driven by (then) three-time World Drivers' Champion Sebastian Vettel and teammate Mark Webber.[4][5] Sebastian Vettel, in keeping with his tradition of naming his cars, named his RB9 "Hungry Heidi," after German model Heidi Klum.[8] Vettel would ultimately claim the Drivers' Championship title, for the fourth consecutive season, at the Indian Grand Prix, after ten wins during the season. Vettel and Webber also brought the car to the last win and world titles for a V8 and a naturally-aspirated engine-powered F1 car, marking the end of the V8 and the naturally-aspirated engine-era of Formula One which began in 1989 when turbocharged engines were banned at that time.
As of 2024, the Red Bull RB9 was the most recent Renault-powered Formula One car to win either the Drivers' or Constructors' Championship.
Competition history
[edit]In January 2013, Red Bull Chief Technical Officer Adrian Newey admitted that development of the RB9 chassis had been put on hold during the second half of the 2012 season so that the team could concentrate on developing its predecessor, the RB8, in order to secure the 2012 World Drivers' and Constructors' Championship titles.[6]
The RB9 had a strong debut in Australia, with Vettel topping both Friday practice sessions,[9][10] before taking pole position in qualifying, ahead of teammate Webber.[11] Webber suffered a poor start due to a problem with KERS,[12] while Vettel suffered with tyre degradation and finished the race in third place. Webber finished the race in sixth place.[13]

In Malaysia, Vettel went on to win the race, following an order (which he ignored) to let his teammate Webber win the race. In China, Vettel did not set any time in the last session of qualifying, and Webber originally qualified 14th, but moved to the back of the grid for failing to provide a one-litre fuel sample after qualifying. In the race, Webber lost his rear right wheel on lap 15, meanwhile Vettel was almost close to get a podium finish to Lewis Hamilton, finishing 4th with a 0.203 second gap. In Bahrain, Vettel went on to win the race ahead of both Lotus drivers Kimi Räikkönen and Romain Grosjean.
The next race at Spain at Catalunya was disappointing for the team; neither driver got onto the podium. In Monaco, Vettel finished 2nd with a fastest lap set on the 77th lap, and Webber finished 3rd. In Canada, Vettel went on to win the race ahead of Fernando Alonso and Lewis Hamilton, meanwhile Webber finished 4th. At the British Grand Prix, Vettel and Webber qualified 3rd and 4th respectively, but on lap 41 of the race, Vettel suffered from a gearbox problem coming to the final turn of the circuit, costing him a victory. The safety car would be deployed, and the race was won by Nico Rosberg. His teammate Webber would finish 2nd. Vettel went on to win at his home race in Germany at Nürburgring. In Hungary Vettel and Webber finished 3rd and 4th respectively.

From Belgium to the season-ending race at Brazil, Vettel broke the record for most consecutive wins in a season by a total of 9. Sebastian Vettel would eventually clinch his fourth and final World Drivers' Championship title at the Indian Grand Prix.
Mark Webber announced his Formula One retirement at the British Grand Prix, and the seat went to fellow Australian Daniel Ricciardo which was confirmed in September.
Sponsorship and livery
[edit]The basic colors of the RB9 are dark blue and purple. In addition to sponsor stickers from Infiniti, there are large Red Bull stickers on the side pods, the Red Bull logo on the hood and nose, and the Red Bull lettering on the front and rear wings. Other sponsors on the vehicle are Rauch, Pepe Jeans, Casio and Geox.
Electric version
[edit]On August 20, 2014, on the sidelines of the 2014 Belgian Grand Prix, Red Bull presented a fully electric version of the RB9, fitted with the nose of the Red Bull RB10, intended to facilitate pit stop training for mechanics; indeed, this electric single-seater can easily move forwards and backwards, which makes it possible to increase the frequency of operations devolved to mechanics.[14]
Other events
[edit]At the start of the 2014 F1 season, Daniel Ricciardo raced an RB9 against a Royal Australian Air Force (RAAF) F/A-18 Hornet, piloted by RAAF pilot Michael Keightley.[15]

Complete Formula One results
[edit](key) (results in bold indicate pole position; results in italics indicate fastest lap)
| Year | Entrant | Engine | Tyres | Drivers | Grands Prix | Points | WCC | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AUS | MAL | CHN | BHR | ESP | MON | CAN | GBR | GER | HUN | BEL | ITA | SIN | KOR | JPN | IND | ABU | USA | BRA | |||||||
| 2013 | Infiniti Red Bull Racing | Renault RS27-2013 | P | 3 | 1 | 4 | 1 | 4 | 2 | 1 | Ret | 1 | 3 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 596 | 1st | |
| 6 | 2 | Ret | 7 | 5 | 3 | 4 | 2 | 7 | 4 | 5 | 3 | 15† | Ret | 2 | Ret | 2 | 3 | 2 | |||||||
† Driver failed to finish the race, but was classified as they had completed greater than 90% of the race distance.
References
[edit]- ^ "Red Bull Racing Car". Infinity-RedBullRacing.com. Red Bull Racing Ltd. Archived from the original on 3 February 2013. Retrieved 6 February 2013.
- ^ "The Cars".
- ^ Noble, Jonathan; Beer, Matt (11 December 2013). "F1 teams expert enough to avoid early tyre struggles – Ross Brawn". Autosport.com. Haymarket Publications. Retrieved 7 January 2013.
- ^ a b Beer, Matt (14 March 2011). "Horner pleased to end Vettel rumours". Autosport. Haymarket Publications. Retrieved 7 January 2013.
- ^ a b Beer, Matt (10 July 2012). "Webber will stay with Red Bull Racing for the 2013 Formula 1 season". Autosport.com. Haymarket Publications. Retrieved 7 January 2012.
- ^ a b Benson, Andrew (3 January 2013). "Red Bull's Adrian Newey says title wins affecting 2013 preparation". BBC F1. BBC. Retrieved 4 January 2013.
[Designer Adrian Newey] said that the challenge of running dual programmes and the necessity to keep developing the 2012 car to the end of the season had delayed work on the 2013 car, the RB9.
- ^ Collantine, Keith (18 November 2012). "Red Bull win third constructors' title in a row". F1 Fanatic. Keith Collantine. Retrieved 7 January 2013.
- ^ Jeleva, Dessislava (14 March 2013). "F1 News - Vettel names RB9 Hungry Heidi". SportPulse. Dessislava Jeleva. Archived from the original on 13 October 2013. Retrieved 8 June 2013.
- ^ "Vettel on top in Australia". Formula1.com. Formula One Administration. 15 March 2013. Retrieved 29 March 2013.
- ^ "Vettel leads Red Bull 1-2 in Melbourne". Formula1.com. Formula One Administration. 15 March 2013. Retrieved 29 March 2013.
- ^ "Vettel storms to Sunday pole in Australia". Formula1.com. Formula One Administration. 17 March 2013. Retrieved 29 March 2013.
- ^ Straw, Edd; Beer, Matt (17 March 2013). "Webber hit by telemetry, KERS issues". Autosport. Haymarket Publications. Retrieved 29 March 2013.
- ^ "Raikkonen and Lotus triumph in Australia". Formula1.com. Formula One Administration. 17 March 2013. Archived from the original on 29 March 2013. Retrieved 29 March 2013.
- ^ "Red Bull utilise une F1 100% électrique à Spa". Motorsport.nextgen-auto.com. 21 August 2014. Retrieved 6 October 2022.
- ^ "Red Bull v Hornet: Ricciardo joins the RAAF". Redbull.com. Red Bull. 15 March 2014. Retrieved 28 August 2020.
External links
[edit]Red Bull RB9
View on GrokipediaDevelopment
Background
Red Bull Racing, under the leadership of chief technical officer Adrian Newey, decided to pause development of the RB9 in the second half of 2012 to concentrate resources on optimizing the RB8 for the ongoing season.[9] This strategic shift was articulated by Newey, who stated, "We had to focus until the last moment on development of the RB8 in order to retain the two titles," acknowledging that the intense late-season push compromised planning for the successor car.[9] The decision resulted in a delayed start to RB9 work, requiring a compressed timeline during the winter to catch up.[10] The rationale behind this prioritization was to secure back-to-back world championships before redirecting efforts toward the RB9, which would compete under revised 2013 regulations including changes to exhaust systems, the floor, and DRS usage.[11] Newey later reflected that while it led to "a busy winter trying to make up for lost time," the choice was appropriate given the success it enabled.[10] Entering the 2013 season, Red Bull arrived as the defending Constructors' and Drivers' champions, with Sebastian Vettel having clinched his third consecutive drivers' title in 2012.[12]Design process
Following the success of the RB8 in securing both the Drivers' and Constructors' Championships in 2012, Red Bull paused development of its successor to focus resources on the ongoing title fight. Work on the RB9 resumed in late 2012, led by chief technical officer Adrian Newey and the technical team at the team's Milton Keynes headquarters, resulting in a relatively compressed design timeline.[10][13] The RB9 made its public debut on February 3, 2013, during a low-key launch event at Red Bull's Milton Keynes facility, where media were not permitted to take photographs, showcasing only a baseline version of the car.[4][14][15] Among the key innovations, the RB9 featured a refined Coanda exhaust system, evolved from the RB8's layout to optimize airflow adhesion along the bodywork for improved aerodynamic performance without major regulatory changes. The front wing incorporated an S-duct, drawing high-pressure air from beneath the nose and venting it over the upper surface to generate extra downforce while minimizing drag. The push-rod front suspension was carried over from the RB8 but adjusted with subtle geometry tweaks to broaden the setup range, better suiting the revised Pirelli tire compounds and construction introduced for the 2013 season.[16][17][18] The baseline RB9 made its track debut during pre-season testing at Jerez, where initial shakedown runs and reliability assessments confirmed mechanical integrity and basic functionality.[19][20]Technical specifications
Chassis and aerodynamics
The Red Bull RB9 featured a carbon-fibre composite and aluminium honeycomb monocoque chassis, constructed in-house at the team's Milton Keynes facility.[2][21] This structure incorporated the Renault V8 engine as a fully stressed member, contributing to overall rigidity while adhering to the 2013 FIA regulations mandating a minimum weight of 642 kg including the driver.[2][21] The chassis dimensions complied with Formula One standards, with a maximum width of 1800 mm and height of 950 mm.[2] These proportions allowed for a compact layout that optimized packaging for aerodynamic efficiency and mechanical components.[16] The front suspension employed a carbon-composite double wishbone configuration with push-rod actuation, integrating torsion bar springs, an anti-roll bar, and Multimatic dampers for precise handling and compliance.[2][21] Aluminium alloy uprights were used to minimize unsprung mass while maintaining structural integrity under high lateral loads.[21] At the rear, a similar double wishbone setup utilized pull-rod geometry, also with torsion bar springs, anti-roll bar, and Multimatic dampers, paired with aluminium alloy uprights to support the car's drive dynamics.[2][21] This split philosophy—push-rod front and pull-rod rear—enhanced aerodynamic flow management beneath the chassis by lowering actuator interference.[17] Aerodynamically, the RB9 evolved the 'hump' nose design from the preceding RB8, retaining the raised profile but eliminating the forward-facing vent to streamline airflow over the front wing and towards the sidepods.[16] The sidepods were kept short and narrow, inheriting the compact shape from the RB8 to promote cleaner underbody flow and reduce drag, with added cooling gills introduced during early testing for thermal management.[16] The rear diffuser incorporated refinements to the exhaust-blown system, featuring Coanda-effect outlets positioned to energize the diffuser tunnels, thereby improving downforce extraction without relying on prohibited off-throttle blowing techniques banned for 2013.[16] Weight distribution was finely tuned around the 45/55 front-to-rear bias typical for rear-wheel-drive F1 cars, achieved through strategic placement of the stressed engine and ancillary components to maintain balance under varying fuel loads. The RB9 was equipped with Pirelli P Zero tires, designed specifically for the 2013 season's softer compounds that emphasized thermal degradation and required careful setup compatibility to manage wear across the supersoft, soft, medium, and hard slicks, as well as the intermediate and wet options.[21][11]Engine and powertrain
The Red Bull RB9 was powered by the Renault RS27-2013 engine, a 2.4-litre naturally aspirated V8 with a 90-degree bank angle and double overhead camshaft (DOHC) configuration featuring 32 valves.[21][2] This mid-mounted unit, limited to 18,000 rpm by FIA regulations, delivered approximately 750 horsepower, maintaining the high-revving character typical of the era's V8 engines while prioritizing efficiency under the frozen development rules.[22][23] Complementing the internal combustion engine was the Kinetic Energy Recovery System (KERS), a hybrid setup mandatory for all 2013 Formula One cars under FIA rules. The system harvested braking energy to provide a maximum power boost of 60 kW—equivalent to about 80 horsepower—for up to 6.67 seconds per lap, with total energy deployment capped at 400 kJ to ensure fair competition.[24] Integrated seamlessly with the drivetrain, the KERS enhanced acceleration out of low-speed corners without altering the car's fundamental propulsion architecture.[25] The powertrain included a seven-speed semi-automatic sequential gearbox, longitudinally mounted and equipped with hydraulic paddle-shift actuation for rapid gear changes. Constructed with carbon composite materials for lightweight durability, the transmission from Red Bull Technology handled the high-torque outputs while complying with FIA safety standards.[21][16] Fuel delivery adhered to the 2013 FIA regulations, which prohibited refueling during races and required a single rubber bladder tank integrated into the chassis for safety. Supplied by Total, the system used a blend of 94.25% 102 RON unleaded gasoline and 5.75% biofuel, optimized for the V8's combustion efficiency without a strict mass limit per race, though practical loads typically ranged around 100 kg to balance weight and endurance.[24][23] Building on lessons from the preceding RB8, the RB9's powertrain addressed reliability concerns that had plagued Renault engines in 2012, such as overheating and component failures during high-temperature grands prix. Enhancements included refined cooling circuits and reduced mileage degradation in the RS27-2013, allowing for greater consistency over the season's demanding calendar.[26][23][27] These improvements minimized downtime and supported Red Bull's pursuit of back-to-back titles.Livery and sponsorship
Primary sponsors
The primary sponsor for the Red Bull RB9 during the 2013 Formula One season was Infiniti, Nissan's luxury automotive brand, which entered a four-year title sponsorship deal providing substantial financial support and prominent branding integration.[28] This arrangement marked a notable evolution in the team's commercial structure, transitioning from predominantly Red Bull-focused branding to a more diversified portfolio, with Infiniti's involvement including technical collaboration on vehicle performance projects and personnel exchanges at the Milton Keynes headquarters.[19] The Infiniti logo appeared prominently on the car's nose cone and sidepods, reflecting its elevated status.[29] Red Bull, the Austrian energy drink company and team owner, remained the core commercial backbone, funding operations and maintaining its foundational role in the team's identity.[30] Supporting sponsors included Rauch, an Austrian family-owned beverage firm that has partnered with the team since 2005, acting as the official vitamin and non-alcoholic drinks provider to enhance team wellness and hydration.[31] Pepe Jeans London served as the official apparel supplier, delivering team clothing collections under a renewed agreement that solidified its role in outfitting personnel.[32] Casio, via its Edifice watch line, functioned as the official timepiece partner, with branding on the vehicle stemming from a multi-season contract.[33] Geox contributed as the footwear sponsor, replacing previous providers and supplying specialized shoes for drivers and staff.[34] Key technical partners encompassed Renault, which supplied the RS27 2.4-liter V8 engine powering the RB9, ensuring compliance with the era's regulations while optimizing performance.[19] Pirelli provided the P Zero tires as the sole official tire supplier for the 2013 season, delivering compounds tailored for diverse track conditions. OMP equipped the team with fireproof racing gear, including suits and accessories, to meet FIA safety standards.Livery design
The Red Bull RB9's livery retained the team's signature navy blue base color scheme, complemented by white and yellow accents that evoked the energetic Red Bull branding. This evolved from the RB8's design by introducing subtle refinements to the motifs, while preserving the core visual identity that had become synonymous with the team's success. The overall aesthetic aimed for a premium, dynamic appearance suitable for high-speed competition.[3] A notable evolution in the RB9's livery was the integration of purple accents to reflect the new title partnership, appearing on the nose cone, sidepods, front wing, rear wing, and a central stripe across the monocoque. These additions provided a striking contrast against the navy blue, enhancing the car's visual impact without altering the fundamental layout.[28][35] Key branding elements were strategically placed for maximum visibility: the Red Bull logo dominated the rear wing and engine cover, the Infiniti script was featured prominently on the nose cone, and smaller sponsor logos were positioned on the sidepods. Sponsor logos were seamlessly integrated into the design to maintain a cohesive look. These placements prioritized aesthetic harmony and brand prominence.[36][3]2013 Formula One season
Pre-season testing
The pre-season testing for the Red Bull RB9 commenced at the Jerez circuit from February 5 to 7, 2013, with a primary focus on reliability and baseline data collection for the new car. Mark Webber drove on the first two days, completing 73 laps on day one with a best time of 1:19.709 and 101 laps on day two, while Sebastian Vettel took over for day three, logging 102 laps and a best lap of 1:19.052 to place third overall for the session. The team accumulated a total of 276 laps across the three days, prioritizing mechanical checks and systems integration over outright pace, as Webber noted the car "felt good" and allowed for substantial mileage without reliability setbacks.[37][38][39] Vettel echoed this sentiment after his run, describing it as "great to get back in the car" and highlighting the productive work completed, though the cold weather at Jerez presented minor setup challenges in optimizing the chassis balance. The RB9 demonstrated improved straight-line speed compared to its predecessor, the RB8, but initial sessions revealed some understeer tendencies that the team addressed through aerodynamic adjustments to the front wing and floor.[39][40] The subsequent test at the Circuit de Barcelona-Catalunya from February 19 to 22, 2013, shifted emphasis to race setup refinement, long-run simulations, and tire evaluation, where the team completed 345 laps in total. Webber and Vettel alternated driving duties, with the car showing competitive long-run pace but raising concerns over degradation rates with the revised Pirelli tires, which featured a more aggressive compound lineup for the season. Vettel and Webber both reported positive handling in warmer conditions, noting the RB9's balanced feel and potential for further gains, though tire management remained a focal point for ongoing development.[41][42][43] Overall, Red Bull's pre-season mileage ranked third behind Sauber and Mercedes, underscoring the RB9's solid reliability foundation ahead of the Australian Grand Prix, with no major mechanical failures reported across both sessions. The testing program validated evolutionary design refinements from the RB8, setting a promising baseline despite the challenges posed by the new tire specifications.[44][4]Drivers and team
The Red Bull RB9 was piloted by Sebastian Vettel, the defending Formula One World Drivers' Champion assigned car number 1, and his teammate Mark Webber, assigned number 2, for the entirety of the 2013 season, with no driver lineup changes occurring mid-season.[45][14] Leading the team as principal was Christian Horner, who managed overall operations and strategy during the campaign. Key technical personnel included Adrian Newey, serving as chief technical officer and overseeing the car's design development, and Jonathan Wheatley, acting as team manager with responsibilities in race engineering and coordination.[45][46][47] Internal team dynamics were marked by tensions between the drivers, exemplified by the "Multi-21" controversy at the Malaysian Grand Prix, where Vettel ignored team orders to maintain second position behind Webber, leading to public friction and highlighting preferential treatment debates within the squad.[48][49] The support crew, comprising skilled mechanics and strategists, played a crucial role in operational success through exceptional pit stop efficiency, achieving an average stationary time of 2.5 seconds that supported rapid tire changes and positioned Red Bull as a benchmark for in-race execution.[50][51]Competition history
Early season performance
The Red Bull RB9 showed promising but inconsistent form at the start of the 2013 Formula One season, with Sebastian Vettel securing podium finishes in the opening rounds while the team grappled with reliability and strategic hurdles. In the Australian Grand Prix, Vettel claimed third place after leading early but fading due to tire management issues, earning 15 points, while teammate Mark Webber struggled with a KERS failure and finished sixth for eight points.[52] The Malaysian Grand Prix brought Red Bull's first victory of the year, as Vettel won ahead of Webber in second, but the result was overshadowed by internal controversy when Vettel disobeyed team orders to maintain position behind Webber, leading to the infamous "Multi 21" radio exchange that highlighted growing driver tensions.[53][48] In China, both drivers endured a tougher weekend; Vettel recovered to fourth for 12 points after qualifying issues, and Webber, disqualified from qualifying and starting from the pit lane, retired from the race, earning no points, as Ferrari's Fernando Alonso took the win.[54] The Bahrain Grand Prix marked a turning point with aerodynamic upgrades, including a revised floor and updated sidepods designed to optimize airflow and boost downforce, helping Vettel dominate for his second victory of the season with 25 points, while Webber took seventh for six points.[55][56] These enhancements addressed some early aerodynamic sensitivities exacerbated by the high track temperatures. However, challenges persisted in Spain and Monaco, where Pirelli's aggressive tire compounds caused excessive degradation, forcing Red Bull into conservative pit strategies that limited their pace. Vettel finished fourth in Spain (12 points) and second in Monaco (18 points), with Webber fifth (10 points) and third (15 points) respectively, as Alonso won in Spain and Mercedes' Nico Rosberg triumphed in Monaco.[57][58] Early rivals like Ferrari and Lotus proved formidable, with Alonso's strategic masterclasses in China and Spain, alongside Kimi Räikkönen's win in Australia, keeping pressure on Red Bull in the Constructors' Championship. The RB9's tire wear issues, particularly on the rear compounds, contrasted with Lotus's better management and Ferrari's consistent one-two finishes in several sessions, though Red Bull's raw pace shone through in qualifying.[59] After six rounds, Red Bull held the lead in the Constructors' standings with 164 points, ahead of Ferrari's 123 and Lotus's 112, setting the stage for mid-season improvements despite the internal frictions from the Multi 21 incident.[60]Mid-to-late season dominance
The Red Bull RB9's mid-to-late season form marked a decisive shift toward dominance in the 2013 Formula One World Championship, beginning with the Canadian Grand Prix (Round 7). Sebastian Vettel claimed victory at Circuit Gilles Villeneuve, leading every lap after starting from pole position and finishing over 14 seconds ahead of the second-placed Lotus of Kimi Räikkönen. This result followed the introduction of a key aerodynamic upgrade package for the RB9, which included a revised nose cone design that eliminated the underbody bulge from the previous specification and repositioned the front-facing cameras for better airflow management. These changes, combined with refinements to the front wing and exhaust system integration, improved the car's straight-line speed and aerodynamic efficiency, particularly on high-speed circuits where Red Bull had previously struggled.[61] Building on this momentum, the RB9 excelled through Rounds 8 to 17 (British to Abu Dhabi Grands Prix) and in the season finale at Brazil (Round 19), with Vettel securing nine consecutive victories from the Belgian Grand Prix onward—a record at the time for the longest winning streak in a single F1 season. Key highlights included Vettel's pole-to-flag triumphs in Italy, Singapore, Korea, Japan, and India, where the RB9's superior downforce and tire management allowed consistent lap-time advantages. Red Bull's resurgence was further evident in a pole position streak starting from the Singapore Grand Prix, with Vettel topping qualifying in six of the final seven races. By the Singapore Grand Prix, Red Bull had overtaken Ferrari to lead the Constructors' Championship by 103 points, a margin that grew unassailable as the season progressed.[62][63][64] Vettel's Drivers' Championship title was mathematically secured at the Indian Grand Prix (Round 16), where he won by a 28-second margin over the second-placed Mercedes of Nico Rosberg, extending his points lead to 77 over Ferrari's Fernando Alonso with three races remaining. The RB9's reliability and pace were pivotal, as the team avoided major mechanical issues during this phase. The season ended triumphantly at the Brazilian Grand Prix, with Vettel mastering wet qualifying conditions to take pole and then winning the race in variable weather, finishing ahead of teammate Mark Webber for a Red Bull one-two. This victory not only completed the nine-win streak but also confirmed Red Bull's fourth consecutive Constructors' title.[65][66][67]Results and achievements
Season statistics
The Red Bull RB9 participated in all 19 Grands Prix of the 2013 Formula One season, achieving 13 race victories—all secured by Sebastian Vettel—along with 24 podium finishes, 11 pole positions (9 by Vettel and 2 by Mark Webber), and 12 fastest laps (7 by Vettel and 5 by Webber). Vettel accumulated 397 points to claim the Drivers' Championship, while Webber scored 199 points, enabling Red Bull to total 596 points and win the Constructors' Championship for the fourth consecutive year.[68] Vettel's 13 wins represented a 68.4% success rate across his 19 starts, underscoring the RB9's competitive edge in race conditions. The team encountered 5 retirements in total (1 for Vettel and 4 for Webber), after which reliability remained strong with no further mechanical or collision-related failures impacting results.[68] In qualifying, the RB9 demonstrated clear superiority over rivals, posting an average time deficit of 0.18% to the session's fastest lap—compared to 0.73% for the Ferrari F138—translating to a substantial performance margin in single-lap pace. Red Bull drivers also averaged stronger grid positions, with Vettel qualifying 2.05 on average and Webber 3.89, outperforming Ferrari's Fernando Alonso (6.16) and Felipe Massa (8.21). For detailed race-by-race outcomes, refer to the complete 2013 season results table.[69][70]| Driver | Grands Prix | Wins | Pole Positions | Fastest Laps | Podiums | Points |
|---|---|---|---|---|---|---|
| Sebastian Vettel | 19 | 13 | 9 | 7 | 16 | 397 |
| Mark Webber | 19 | 0 | 2 | 5 | 8 | 199 |
| Team Total | 19 | 13 | 11 | 12 | 24 | 596 |
