Hubbry Logo
logo
Buttonhole avatar
Buttonhole
Community hub

Buttonhole

logo
0 subscribers
Read side by side
Buttonhole
View on Wikipedia
from Wikipedia
Machine-stitched keyhole buttonhole with bar

A buttonhole (/bʌtən.hoʊl/) is a reinforced hole in fabric that a button can pass through, allowing one piece of fabric to be secured to another. The raw edges of a buttonhole are usually finished with stitching. This may be done either by hand or by a sewing machine. Some forms of button, such as a frog, use a loop of cloth or rope instead of a buttonhole.[1]

The term buttonhole can also refer to a flower worn in the lapel buttonhole of a coat or jacket, which is referred to simply as a "buttonhole" or "boutonnière".[2]

History

[edit]

Buttonholes for fastening or closing clothing with buttons appeared first in Germany during the 13th century.[3] They soon became widespread with the rise of snug-fitting garments in 13th- and 14th-century Europe.[citation needed]

Aspects of buttonholes

[edit]

Buttonholes often have a bar of stitches at either side of them. This is a row of perpendicular hand or machine stitching to reinforce the raw edges of the fabric, and to prevent it from fraying.[4]

Traditionally, men's clothing buttonholes are on the left side, and women's clothing buttonholes are on the right.[5] The lore of this 'opposite' sides buttoning is that the practice came into being as 'women of means' had chamber maids who dressed them. So as not to confuse the poor chamber maids, the wealthy began having women's garments made with the buttons and holes 'switched'; the birth of the modern ladies' blouse. The chamber maids themselves, as did most all the common class, both male and female, actually wore 'shirts' with buttons and holes placed as on men's clothing. There appears to be no concrete reference to prove or disprove this story, but its plausibility bears noting.[6][7]

Types of buttonholes

[edit]
A machine-made buttonhole.
A bound buttonhole. The inset fabric panels are called welts.

Hand stitching

[edit]
  • A plain buttonhole is one in which the raw (cut) edges of the textile are finished with thread in very closely spaced stitches, typically the buttonhole stitch. When stitched by hand, a slit is made in the fabric first and the result is called a hand-worked buttonhole or worked buttonhole.[8] The buttonhole construction sometimes includes a technique called stranding where a flat piece of gimp cord or thread is incorporated into the edges to act as a reinforcement.[9]
  • A Milanese buttonhole: after the hole for the button is cut, a length of silk thread called a gimp is laid around the edges. A glossier buttonhole thread is then wrapped around the gimp and sewn through the cloth surrounding the buttonhole. It is used in bespoke menswear as a detail to embellish the jacket because it serves no purpose other than to hold lapel pins and flowers.[10]

Machined stitching

[edit]

Sewing machines offer various levels of automation to creating plain buttonholes. When made by machine, the slit between the sides of the buttonhole is opened after the stitching is completed.[11]

  • A machine-made buttonhole is usually sewn with two parallel rows of machine sewing in a narrow zig-zag stitch, with the ends finished in a bar tack created using a broader zig-zag stitch.[12] One of the first automatic buttonhole machines was invented by Henry Alonzo House in 1862.[13]
  • A bound buttonhole is one which has its raw edges encased by pieces of fabric or trim instead of stitches.[14][15]
  • A keyhole buttonhole is a special case of a thread-finished buttonhole that has a round hole at the end of the buttonhole slit, reinforced with a fan-shaped array of stitches. Because a button-closed gap in a garment is normally under some stress, the button will tend to move towards the end of the buttonhole closest to the gap in the garment.[16] A keyhole at the end of the buttonhole closest to the gap accommodates the button's shank without distorting the fabric. Keyhole buttonholes are most often found on tailored coats and jackets.[12] This buttonhole is normally machine-made due to the difficulty of achieving it by hand working.

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Buttonhole

View on Grokipedia
from Grokipedia
A buttonhole is a slit or opening in fabric, reinforced with specialized stitching to accommodate a button for fastening garments or accessories while preventing fraying and ensuring durability.[1] This essential sewing feature, often finished with looped buttonhole stitches, creates a secure and neat edge that withstands repeated use.[2] The invention of the buttonhole in 13th-century Germany marked a pivotal shift in clothing design, transforming buttons from ornamental status symbols—previously used in Asia with loops or hooks—into practical fasteners that enabled form-fitting garments across Europe.[3] Crusaders introduced early button concepts to the continent, but the buttonhole's development allowed for tighter silhouettes and revolutionized fashion by the Renaissance period.[4] In the 19th century, industrialization and the patenting of the first American buttonhole sewing machine by Charles Miller in 1854 (U.S. Patent No. 10,609) democratized production, making buttonholes accessible beyond elite tailoring and integrating them into mass-manufactured clothing.[5] Buttonholes vary by construction and style to suit different fabrics and applications, broadly categorized as hand-sewn or machine-sewn. Hand-sewn buttonholes, prized in bespoke tailoring for their strength and precision, involve working loops with waxed thread around a slit, often on wool or heavy fabrics.[6] Machine-sewn varieties include straight (with bartack ends for lighter materials) and keyhole (featuring a rounded end for larger buttons).[7] Bound buttonholes use fabric lips for a tailored look on coats,[8] while corded buttonholes incorporate gimp for reinforcement on stretchy knits.[9] These techniques, refined over centuries, remain crucial in both functional sewing and decorative embroidery, such as 19th-century buttonhole samplers that showcased seamstresses' skills.[5]

Overview

Definition and Purpose

A buttonhole is a reinforced slit or opening in fabric, typically framed by stitches, designed to allow a button to pass through and secure by tension.[10][7] This construction ensures the opening maintains its shape and integrity under repeated use.[11] The primary purpose of a buttonhole is to enable reversible fastening in clothing, permitting easy attachment and detachment of garment sections while offering adjustability for a customized fit.[12] Unlike hooks or zippers, buttonholes paired with buttons provide both functional closure and aesthetic appeal, as the visible elements can enhance design without bulk.[10] They contribute to durability by preventing fabric tearing at stress points and supporting long-term wear through reinforcement.[13] Additionally, proper sizing—typically the button diameter plus thickness and a small allowance—allows for ease of buttoning and prevents unintended gaps or strain on the garment.[7][12] Buttonholes evolved from simple slits in ancient garments to stitched reinforcements that enhance both functionality and stability.[14] This progression allows for repeated use while contributing to overall garment fit and comfort.[15]

Basic Anatomy

A standard buttonhole consists of several key components that provide structure and durability. The lips refer to the folded edges along the long sides of the opening, which are typically formed by fabric folds or bound strips to create a neat, reinforced boundary.[16] The purl is the stitched ridge running along these lips, created by dense buttonhole stitches that form a knotted or braided edge to protect the fabric from fraying and enhance aesthetics.[17] At the center lies the eye, the open slit through which the button passes, serving as the functional core of the buttonhole.[7] The ends are secured by bars, which are reinforced horizontal stitches—either plain tacks for straight closure or fan-shaped for added strength—preventing the fabric from tearing under pressure.[18] Buttonholes exhibit structural variations based on orientation and shape, influencing their performance. Horizontal buttonholes, aligned perpendicular to the garment's edge, distribute tension across the end bars, making them more resistant to stretching and suitable for areas with lateral pull, whereas vertical orientations align with the edge and rely on side lips for stability, potentially leading to greater elongation under vertical stress.[19] A common variation is the keyhole shape, featuring a circular enlargement at one end of the eye to accommodate the shank or thicker portion of larger buttons, allowing smoother passage without distortion.[7] Reinforcement in buttonholes relies on precise stitching mechanics to ensure longevity. The bars at each end, formed by closely spaced blanket or buttonhole stitches, create a durable anchor that absorbs and distributes stress from repeated buttoning, preventing the eye from widening or the fabric from ripping.[13] Similarly, the purl along the lips uses looped stitches to build a firm, elevated ridge that resists abrasion and maintains the opening's integrity over time.[11] Typical measurements for a buttonhole prioritize functionality, with the length generally set slightly longer than the button's diameter—often by about 1/8 inch (3 mm)—to allow ease of insertion while minimizing excess slack.[20] This extra space accounts for button thickness and fabric movement, ensuring a secure yet accessible fit.[20]

History

Early Origins

The earliest precursors to buttonholes emerged in prehistoric times as simple openings in animal hides and furs used for clothing, dating back to the Paleolithic era when humans began processing skins for garments around 120,000 years ago. These rudimentary features allowed for basic fastening or tying with cords or thongs, facilitating the draping or securing of hides without advanced sewing, though direct evidence of such methods is limited until later periods. Paired with early decorative elements, such as bone or shell objects used for adornment, these represented initial steps toward structured attire, though they lacked reinforcement and were primarily functional for survival in harsh climates.[21] In ancient civilizations, button-like objects appeared alongside simple openings, marking the transition to more defined closures. The Indus Valley Civilization produced the earliest known buttons around 2800–2000 BCE, crafted from shells and likely used with slits in lightweight fabrics for decorative or semi-functional purposes on tunics and shawls.[22] Similarly, in ancient Egypt, buttons made of bone, wood, or faience emerged by around 1400 BCE during the New Kingdom, often paired with slits in linen garments to secure wraps or edges, as seen in tomb artifacts and textile fragments.[23] In Bronze Age Europe, evidence from bog-preserved remains indicates evolving use of slits for practical garment assembly during the Pre-Roman Iron Age, with tied closures common in wool and leather attire.[24] In ancient China and India, button-like fasteners paired with fabric loops appeared as early as 2000 BCE, influencing later European designs through trade routes.[23] Medieval Europe saw significant advancements in buttonhole construction during the 12th–14th centuries, with the introduction of woven fabric slits that enabled tighter, more fitted clothing. Influenced by the Asian silk trade, which introduced finer textiles and stitching techniques via routes connecting Europe to China and the Middle East, tailors began creating reinforced openings in wool and silk garments around the 13th century.[23] The first functional buttonholes—slits edged with stitches for durability—appeared in Germany, revolutionizing fashion by allowing buttons to serve as practical fasteners rather than mere ornaments, as documented in early tailoring practices that emphasized form-fitting designs.[25] Written references to these techniques emerge in 13th-century European texts on garment construction, highlighting their role in sumptuary-regulated attire for nobility.[5] By the Renaissance in 15th–16th century Europe, buttonholes transitioned from basic slits to reinforced forms using overcasting stitches, which wrapped edges to prevent fraying and enhance strength in luxurious fabrics like velvet and brocade. This shift, evident in surviving garments and pattern books, supported the era's emphasis on elaborate, tailored silhouettes, with buttonholes often worked in silk thread for both utility and decoration.[26]

Modern Developments

The mechanization of buttonhole production accelerated during the 19th century with the advent of dedicated sewing machines. In 1854, Charles A. Miller received U.S. Patent No. 10,609 for the first machine designed specifically to stitch buttonholes, marking a significant innovation that shifted production from labor-intensive handwork to automated processes.[27] This development coincided with the broader adoption of sewing machines in factories during the 1850s and 1870s, where Elias Howe's 1846 lockstitch patent had already laid the groundwork for industrial garment manufacturing, enabling faster and more consistent buttonhole creation on a large scale.[28] By the late 19th century, these technologies facilitated mass production in textile factories, reducing costs and standardizing garment assembly.[29] In the 20th century, refinements in sewing technology further enhanced buttonhole quality and efficiency. Singer Corporation introduced electric-powered sewing machines as early as 1889, with portable models becoming widespread in the 1920s, allowing for more precise control in creating reinforced buttonholes, including those with gimp wrapping for added durability in tailored garments.[30] These electric machines supported attachments like the Singer Buttonholer, which by the mid-20th century enabled home and industrial sewers to produce uniform, professional-grade buttonholes without extensive manual intervention.[31] Post-World War II advancements in synthetic threads, such as nylon and polyester developed in the 1930s and mass-produced after 1945, improved buttonhole longevity by offering greater resistance to abrasion and moisture compared to natural fibers.[32] The 21st century has seen buttonhole production integrate digital and sustainable innovations. Computerized embroidery machines, such as those from Brother and Bernina introduced in the 2000s, allow for programmable custom shapes and placements, enabling designers to create non-traditional buttonholes tailored to specific aesthetics or functional needs. In parallel, the 2010s eco-fashion movement promoted sustainable practices, including the use of recycled polyester threads for buttonhole reinforcements, which reduce environmental impact while maintaining strength, as seen in initiatives by brands like Patagonia.[33] Culturally, modern buttonholes reflect gendered stylistic divergences. In menswear, particularly suit jackets, buttonholes have standardized since the early 20th century, with conventions like four cuff buttonholes (often non-functional) and two or three front placements ensuring uniformity and professionalism.[34] Conversely, 1960s mod fashion in womenswear embraced variability, featuring experimental buttonhole designs—such as asymmetrical or decorative placements on shift dresses and jackets—to align with the era's bold, youth-driven aesthetics.

Construction Methods

Hand-Stitched Techniques

Hand-stitched buttonholes are created through a deliberate, manual process that emphasizes precision to reinforce the fabric opening for repeated use. The technique starts with marking the buttonhole's position and length on the garment's right side, using a tailor's chalk or pencil to draw parallel lines slightly wider than the button, often spaced evenly with a tailor's square for alignment. Basting stitches are then applied around the marked area to secure fabric layers and prevent shifting during construction.[35] Once marked, the fabric is cut along the centerline using sharp scissors or a small chisel on a firm surface to form a clean slit, sometimes tapered into a teardrop shape at one end for an eyelet buttonhole. To bind the raw edges and inhibit fraying, temporary overcasting or whip stitches—about 12 to 15 per inch—are sewn along both sides of the cut, holding the layers together temporarily. The buttonhole stitch is then applied to overcast the edges permanently, working from right to left with the fabric edge facing away from the sewer. This stitch involves bringing the needle up from the wrong side of the fabric, passing the thread behind the needle tip to form a loop, and pulling tight to create a purl knot that sits snugly against the edge, reinforcing it against abrasion. Stitches are spaced closely so that the purls touch, forming a continuous, knotted ridge along the length.[35][12][36] The buttonhole stitch functions as a reinforced variant of the blanket stitch, distinguished by its extra purl loop that locks the working thread in place on the raw edge, providing superior durability for functional openings. Typically executed with waxed silk buttonhole twist thread for smoothness and strength, the stitch depth is adjusted based on fabric weight—shallower for lightweight materials to avoid pulling. For added structure, a gimp cord or handmade four-cord (twisted from doubled silk thread) is laid along the edge before stitching; the needle passes over the cord with each loop, trapping it to form raised, protective lips that guide the button and enhance longevity. At each end of the buttonhole, bar tacks are formed by taking three to five tight, horizontal stitches across the width, often with a double thread for security, to prevent the opening from stretching.[36][35][37] Challenges in hand-stitching buttonholes often include fabric puckering, particularly on lightweight or loosely woven materials, which can distort the shape and appearance. This is addressed by incorporating temporary stabilizers, such as interfacing fused to the wrong side or basting threads to hold the fabric taut during sewing, ensuring even tension. After completing the stitches, the buttonhole is finished by removing basting, applying gentle steam pressing to flatten the edges, and sometimes coating the cut with fray preventer for added security. These steps promote a smooth, professional result that lies flat against the garment.[13][35] Achieving uniform stitches and consistent purl formation demands extensive practice, often on scrap fabric, as even slight variations in tension or spacing can affect functionality and aesthetics. This skill is traditionally acquired through tailoring apprenticeships, where novices spend significant time mastering it under mentorship to meet bespoke standards.[35][38]

Machine-Stitched Techniques

Machine-stitched buttonholes are created through an automated process on specialized sewing machines, typically involving initial bar tacking at one end to secure the fabric, followed by parallel rows of zigzag stitches along the sides to form the boundaries, a central slit cut by a built-in blade, and final bar tacking at the opposite end for reinforcement.[29][39] This sequence ensures a durable, functional opening with reinforced ends, and the entire cycle for a single buttonhole is completed in under 10 seconds on modern industrial models, enabling high-speed production.[40][41] Contemporary buttonhole machines incorporate advanced features such as sensor-based or programmable sizing to match button dimensions automatically, often via a guide mechanism or electronic controls that detect and adjust the length without manual measurement.[42] For instance, models from manufacturers like Brother and Juki allow for programmable shapes, including straight and keyhole varieties, where the eyelet curve at one end facilitates easier button insertion, all configured through digital panels for precision and repeatability.[43][44] Compared to hand-stitched methods, machine techniques provide superior consistency in stitch tension and alignment, critical for high-volume manufacturing where uniformity across garments is essential.[45] This automation has significantly reduced labor requirements in the garment industry since the early 1900s, when buttonholing machines began integrating into assembly lines, boosting output from handmade rates of minutes per hole to seconds while minimizing variations that could lead to defects.[46][47] Common troubleshooting involves adjusting thread tension to suit different fabric weights, as improper settings can cause puckering or jamming during the stitching or cutting phases; for example, loosening tension slightly for thicker materials prevents the fabric from bunching under the presser foot.[48] Operators should also ensure clean blades and proper lubrication to avoid interruptions in the automated cycle.[49]

Types and Variations

Functional Types

Functional buttonholes are designed primarily for secure closure and durability in everyday garments, categorized by their orientation and shape to accommodate specific tensions and button types. The main practical styles include straight horizontal, vertical, and keyhole buttonholes, each suited to different garment areas based on how stress is applied during wear.[7][50] Straight horizontal buttonholes are commonly used on shirt plackets and center front closures, where they provide even tension across the opening to prevent gaping under lateral stress from body movement. Their length is typically matched to the button's width plus a small allowance, such as 1/8 inch (3 mm), ensuring the button passes through smoothly while maintaining a snug fit. These buttonholes are reinforced with bar tacks at both ends to secure the fabric edges.[51][50][7] Vertical buttonholes appear in areas like cuffs and waistbands, positioned along the center line of a placket or band to align with the garment's vertical seams and support closure under longitudinal pull. They rely on the fabric's inherent tension for hold, often featuring bar tacks or fan-shaped reinforcements at the ends to distribute stress and prevent fraying in high-movement zones. This orientation is ideal for fitted openings where horizontal gaping is less of a concern.[50][7] The keyhole buttonhole features a tapered rectangular shape with a rounded eyelet at one end, making it suitable for coat fronts and heavier tailored garments that use shank buttons. The round opening allows the button's shank to rest securely without distorting the fabric, facilitating easier passage of larger buttons while providing added reinforcement for thicker materials.[7] Proper placement of functional buttonholes emphasizes alignment with corresponding buttons to ensure balanced closure and even stress distribution. For horizontal styles, the buttonhole extends slightly beyond the center line toward the garment edge, while vertical ones are centered directly on the placket line; buttons are positioned at the midpoint of vertical buttonholes or offset toward the center in horizontal ones to prevent slippage. This alignment maintains the garment's structure and functionality across varying body movements.[50][52][10]

Decorative and Specialty Types

Bound buttonholes feature fabric lips formed by folding and stitching patches of garment fabric along the edges of a slit opening, creating a polished, welted appearance that enhances the durability and aesthetics of tailored garments.[53] These are commonly employed in high-end jackets and coats, where interfacing is applied beneath the buttonhole area to provide structure and prevent distortion during wear.[53] The technique yields a clean finish that conceals the raw edges, distinguishing it from simpler functional variants by emphasizing refined tailoring details.[54] Piped buttonholes incorporate a cord or narrow strip of fabric, often contrasting, inserted along the slit edges to add subtle texture and visual interest, particularly in couture pieces and upholstery applications.[55] In couture, such as jackets designed by Georges Hobeika, the piping—typically 2.0 to 2.5 mm wide and reinforced with interlining for thin fabrics—elevates the garment's luxurious feel while maintaining functionality.[55] For upholstery, the added bulk from the piping strip ensures resilience against frequent use, contributing a decorative edge that complements structured fabrics like leather or heavy weaves.[55] This method differs from standard bound styles by introducing dimensionality through the enclosed cord, ideal for statement-making designs. Scalloped buttonholes, characterized by curved, wave-like edges, offer a feminine, ornamental alternative to straight slits, often seen in delicate apparel where aesthetics prioritize over heavy utility. Rouleau loops, formed from narrow bias-cut fabric tubes approximately 2 mm in diameter, serve as non-slit closures that mimic buttonholes, providing an elegant, loop-based fastening without cutting into the main fabric.[56] These loops are prevalent in eveningwear and bridal garments, such as back closures on dresses or keyhole necklines, where their slender profile adds a couture-inspired delicacy suitable for lightweight silks or laces.[56] Hand-sewn rouleau loops enhance the feminine finish of formal attire, allowing buttons to pass through with minimal bulk.[57] In niche applications like outdoor gear, waterproof buttonhole variants employ sealed stitching techniques to prevent water ingress through the openings, often using seam sealants on laminates such as Dyneema after construction.[58] These specialized designs adjust stitch length to minimize puncture points while applying polyurethane adhesives like Gear Aid Seam Grip WP along the edges, ensuring integrity in harsh conditions without compromising the closure's operation.[58][59] Such adaptations extend the utility of decorative styles into functional extremes, like sealed plackets on anoraks.[60]

Applications and Design

In Clothing and Fashion

In garment design, buttonholes serve critical functional roles across various clothing items, such as securing front plackets on shirts to allow adjustable closure, enabling cuff adjustments on sleeves for a tailored fit, and facilitating discreet openings in pant flies for practicality.[61] These placements contribute to the overall silhouette; for instance, precisely positioned buttonholes in fitted shirts and trousers promote a structured, body-conforming shape, while fewer or wider-spaced ones in looser garments enhance a relaxed, flowing profile.[62] During the 19th century, industrialization enabled mass production of uniform buttons, contributing to standardized tailored suits and vests in menswear for a more precise, professional appearance that defined Victorian-era formality. In the 20th century, minimalist fashion trends, particularly the shift dress popularized in the 1920s and revived in the 1960s, often featured minimal or no visible fasteners to emphasize clean, unstructured lines and freedom of movement, aligning with modernist ideals of simplicity over ornamentation.[63] Culturally, buttonholes hold symbolic value in uniforms, such as military tunics where they accommodate ribbons or insignia denoting rank and service, as seen in the French Legion of Honor tradition of red-ribboned lapel buttonholes representing national loyalty and achievement.[64] Gender differences in placement persist in Western menswear, with buttonholes typically positioned on the left side (buttons on the right) to accommodate right-handed individuals drawing swords or fastening garments efficiently, a convention dating back to equestrian and martial practices.[65] In contemporary fashion since the 2010s, designers have embraced asymmetrical buttonhole arrangements and hidden variants, such as piped or concealed styles, to promote sustainable practices by reducing material waste and enhancing versatility in modular garments. This approach allows for type selections like bound buttonholes that align with modern aesthetics while maintaining functionality.[66]

Tools, Materials, and Considerations

Creating buttonholes requires specific materials to ensure durability and aesthetics. For threads, silk buttonhole twist is recommended for fine or high-end garments due to its smooth finish and strength, while polyester threads provide enhanced durability for everyday wear and heavier fabrics.[67][68] Interfacings, particularly fusible types, are applied to the fabric's wrong side to add stability and prevent distortion during stitching.[69] Gimp cords, consisting of a silk-wrapped core, are used to reinforce the edges of hand-stitched buttonholes, creating a raised, professional outline.[70] Essential tools include buttonhole cutters, which deliver precise, clean cuts without fraying the fabric, outperforming seam rippers for safety and accuracy.[71] Sharp sewing scissors or shears are necessary for trimming threads and fabrics around the buttonhole area. Beeswax is applied to hand-sewing threads to reduce tangling, enhance strength, and improve glide through the fabric.[72][67] For machine sewing, specialized attachments such as buttonhole presser feet automate the process on domestic machines, while cylinder-bed attachments on industrial machines facilitate buttonholes in curved or tight areas like cuffs.[73][74] Design considerations play a key role in functionality. The length of a buttonhole should typically equal the button's diameter plus 1/8 to 1/4 inch (3-6 mm) to allow smooth fastening without excess slack.[10][75] Fabric weight influences the style and reinforcement; heavier wools or upholstery fabrics often require wider bar tacks or keyhole shapes to accommodate thickness and prevent pulling.[76] Beyond clothing, buttonholes find applications in accessories like belts and tote bags, where they secure closures on leather or fabric straps. In upholstery, they are used for cushions and pillows to create reversible flaps or ties. Crafts such as quilting incorporate buttonholes for layered blocks or bag attachments, adding both utility and decorative elements.[77][78][79]

References

  1. BUTTONHOLE STITCH Definition & Meaning - Dictionary.com
  2. What Is Buttonhole Stitch| Uses, Meaning & Definition - Sewing Inspo
  3. Sewing Button - M.Müller & Sohn
  4. History of the Button! So Fascinating! - Nancy's Notions
  5. Of Buttons, Buttonholes, and Samplers - PieceWork magazine
  6. Buttonhole Basics - American Sewing Guild (ASG)
  7. Buttonholes 101: Part 1
  8. Buttonhole Basics - Threads Magazine
  9. [PDF] Buttons and Buttonholes
  10. Buttonhole Sewing Secrets Every Beginner Should Learn
  11. Buttonholes, pockets and zippers: a short history - Bangor Daily News
  12. Buttons in Garment Manufacturing - Textile School
  13. 101: Bound Button Holes | poppykettle
  14. Buttonholes - EOS Fabrics
  15. Buttonhole bars - RSN StitchBank
  16. Horizontal vs Vertical Buttonholes | National Sewing Circle
  17. Machine Buttonholes Made Easy | New Mexico State University
  18. Determining the size of buttonhole you need from your button.
  19. Evidence of Fur and Leather Clothing, Among World's Oldest, Found ...
  20. Paleolithic eyed needles and the evolution of dress - PubMed Central
  21. The History of the Button - King & Allen
  22. The Westward Journeys of Buttons | AramcoWorld
  23. Tollund Man: What we know about Europe's most famous bog body
  24. Button, Button, Where's That Button?
  25. A History of Button Manufacture, Use & Classification | Crazy Crow
  26. Buttonholes through the Periods - Matsukaze Workshops
  27. 1852 - Charles Miller's Patent Model of a Sewing Machine
  28. US4750A - Improvement in sewing-machines - Google Patents
  29. Button-Hole Machines - Fiddlebase
  30. History - Singer Sewing Machine
  31. More on Singer Buttonholers: The Professional Series - ISMACS
  32. Synthetic Threads | Science History Institute
  33. Art of Manliness Suit School: Part III - A Primer on Suit Buttons
  34. Sewing a Tailored Buttonhole by Hand
  35. Embroidery 101: The Blanket Stitch vs. the Buttonhole Stitch - Threads
  36. Q&A: Blanket Stitch vs. Buttonhole Stitch - Threads Magazine
  37. Dorothy Jacobs Bellanca | Jewish Women's Archive
  38. Industrial Buttonhole Sewing Machines for Quality Clothing
  39. A stitch in time | Festo USA
  40. Brother LH4 B814 button hole sewing machine B817
  41. Professional Button Hole Machine: Precision Automated Sewing ...
  42. Electronic Eyelet Buttonhole Machine - FOXSEW
  43. LBH-1790AN Buttonholing Machine - Juki
  44. Industrial Button Holer Machine: Advanced Automated Buttonhole ...
  45. 5 Machines Used In The Garment Industry - Tech Pack Genius
  46. Custom OEM Automatic Industrial Button Hole Sewing Tacker ...
  47. Sewing Machine Buttonhole Troubleshooting (With Video!) - Ageberry
  48. https://obepro.com.ng/how-to-operate-an-industrial-buttonhole-machine/
  49. There's a Very Good Reason Your Shirt Has a Horizontal Buttonhole
  50. https://itch-to-stitch.com/proper-placements-buttons-buttonholes/
  51. How to Sew a Bound Buttonhole - Threads Magazine
  52. How to Sew Bound Buttonholes and Make Your Jacket Extra Beautiful
  53. Sewing a Piping Buttonhole - M.Müller & Sohn
  54. The Art of Rouleau Button Loops: An Elegant Closure Technique for Your Handmade Wardrobe
  55. How to Hand Sew Button Loops & Rouleau Loops - Sew Essential
  56. How to Make Your Own Gear Part 3 — Sewing!
  57. Re-sealing the Seams on Waterproof Fabrics - Practical Sailor
  58. Waterproof Anorak Sewing Project - Thread Theory - WordPress.com
  59. Buttonhole and shirt: taking care of the details - Kamiceria Outlet
  60. Invention of the Buttonhole Changed the Fashion Industry Forever
  61. All Buttoned Up: Getting Dressed Was Hard in the 19th Century!
  62. https://classicsixny.com/blogs/classic-chronicles/a-shift-in-history
  63. The Legion of Honor: Leading with Red-Ribboned Buttonholes
  64. Men's Shirts Button on the Right. Why Do Women's Button on the Left?
  65. Item of the week: the shift dress - Fashion United
  66. Characteristics of well finished garments - Textile School
  67. Making buttonholes by hand - Tasha Could Make That
  68. https://www.wawak.com/thread/thread-by-use/button-button-holes/
  69. How to sew better buttonholes: 9 tips for success - SewingJulie
  70. How to Sew a Buttonhole by Hand – Ultimate Guide (+ Video)
  71. 13 Sewing Tools to Splurge On - Closet Core Patterns Blog
  72. https://www.sewingworkshop.com/shop/Buttonhole-Cutter-Set-p38176271
  73. Buttonhole Basics and Beyond: Tools and Methods That Work
  74. What Features Does A Cylinder Bed Sewing Machine Have? - News
  75. How to Make a Buttonhole - Sew4Home
  76. https://fridaypatterncompany.com/blogs/blog/tips-for-sewing-machine-button-holes-on-woven-fabrics
  77. https://www.youtube.com/watch?v=jroPLp9n6FA
  78. How to do manual button holes and put together a cushion without ...
  79. Making a Quilted Belt Bag, Sew With Me Vlog - YouTube
User Avatar
No comments yet.