Hubbry Logo
Toyota AAToyota AAMain
Open search
Toyota AA
Community hub
Toyota AA
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Toyota AA
Toyota AA
Toyota AA
View on Wikipedia
from Wikipedia
Replica of 1936 Toyota AA Standard Sedan

The A1 was the first prototype passenger car built by the company that became Toyota. It was redesigned and put into production as Toyota's first production cars, the AA sedan and the AB cabriolet. These were succeeded by the similar AE, AC and BA sedans.

The series as a whole was replaced by the quite different and much more advanced SA.

A1

[edit]
Toyota A1
Overview
ManufacturerToyota
Production1935 (3 prototypes)
AssemblyKoromo, Japan
Body and chassis
Classfull-size car
Body styleSedan
LayoutFR layout
RelatedToyota G1
Powertrain
Engine3.4L Type A I6
Transmission3-speed manual
Chronology
SuccessorToyota AA

Three A1 prototypes were completed in May 1935. None of them survived. They were blessed in a Buddhist ceremony and Kiichiro Toyoda then drove one of them to the grave of Sakichi Toyoda, his father, who gave him the seed money to start a car factory.

After completion of the prototypes, Toyota then switched its attention to the G1 truck because it was more likely to be profitable in the short term. After the G1 was in production the company was able to spend resources on developing the AA and AB passenger cars.

Dates

[edit]

The A1 prototypes were completed in May 1935.

Mechanicals

[edit]

The A1 used the 3,389 cc (206.8 cu in) Type A Overhead valve 6-cylinder engine producing 62 horsepower (46 kW) with a 3-speed column-shift manual gearbox.

The Type A engine was copied from a purchased and reverse engineered 1933 Chevrolet Master, and the chassis and electrics were copied from Ford.[1]

Solid axles were used at both ends. Pressed metal discs were used for all 4 wheel rims (which was very modern for the time). Braking was by drums.

The mechanicals were the same as used in the production AA, AB and G1 vehicles.

Body

[edit]

The A1 was a fully enclosed, 4-door sedan, with conventional front-hinged front doors and rear-hinged suicide-style rear doors. It was heavily based on the Chrysler built DeSoto Airflow, which was a reflection of Art Deco and streamlined appearances.[2] Toyoda bought an Airflow and disassembled it the year before producing the A1. The front window was a single piece of flat glass with a top-mounted wiper on the driver's side. There were 3 windows per side, one for the front door (without a quarter light window), one for the rear door and one behind the rear door. A spare tyre was mounted on the nearly vertical boot lid.

The A1 was available only as a right-hand-drive vehicle.

AA/AB

[edit]
Toyota AA/Toyota AB
1936 Toyota AA official replica by Toyota
Overview
ManufacturerToyota
Production1936–1943
AssemblyKoromo, Japan
Body and chassis
Classfull-size car
Body style
LayoutFront-engine, rear-wheel-drive
Powertrain
Engine3.4 L Type A I6 (original)
Transmission3-speed manual
Dimensions
Wheelbase2,851 mm (112.2 in)[3]
Length4,737 mm (186.5 in)
Width1,734 mm (68.3 in)
Height1,737 mm (68.4 in)
Curb weight1,500 kg (3,307 lb)
Chronology
PredecessorToyota A1
SuccessorToyota AC

The AA was similar to the A1 prototypes with only minor changes.

Dates and production figures

[edit]

A total of 1,404 AA sedans were produced from 1936 to 1943, when the model was replaced by the more austere AC.

A total of 353 AB convertible, including the military ABR version, was produced from 1936 to 1942. There was no direct replacement.

Body types

[edit]

Like the previous model, the AA was a fully enclosed 4-door sedan that largely copied the design of the Chrysler built DeSoto Airflow. It had a metal body on a metal ladder chassis. The metal body was of modern construction compared to the fabric-over-wooden-frame bodies used on cars designed in the 1920s. The rear doors opened backwards as suicide doors. The front glass spanned the entire width of the body in a single pane.

The AB was identical to the AA except that it was a convertible with a folding cloth roof, the rear doors opened forwards like conventional doors and the front glass could fold down onto the engine compartment.

Mechanicals

[edit]

The mechanicals were the same as used in the A1 prototype.

50th year replica

[edit]
1936 Toyota AA official replica by Toyota rear view

Toyota wanted to use an AA for its 50th birthday in 1987 but couldn't find any surviving examples.[4] Toyota decided to build a replica but even for that there were no complete and consistent plans. Plans that could be found were from various points during the car's development process and in any case were often incomplete and lacking by today's standards. However, a single replica was built that is believed to be representative of the AA. The replica uses the 2.3-liter Toyota 2M straight-six engine. This replica is now in the Toyota Automobile Museum.

Discovery of the oldest known AA

[edit]

In 2008 an original AA was found in Vladivostok, Russia in derelict and heavily modified condition, with the undercarriage and drivetrain from a GAZ-51 truck. It is now displayed, still in this condition, in the Louwman Museum in the Netherlands.[5][6] The car was apparently used by a local family for their farm until the 1990s (without them actually knowing its value) before it faced engine problems and was placed in an old barn, where it was later discovered by a 25-year-old student who called the museum.[7] It is unknown how the car ever got to Russia.

  • Model AA at the Louwman Museum
    Model AA at the Louwman Museum
  • 1936 Model AB Convertible
    1936 Model AB Convertible
  • 1938 Model ABR
    1938 Model ABR

AC

[edit]
Toyota AC
Overview
ManufacturerToyota
Production1943–1944, 1947–1948
Body and chassis
Classfull-size car
Body style4-door sedan
LayoutFR layout
Powertrain
Engine3.4L Type B I6
Transmission3-speed manual
Dimensions
Wheelbase2,850 mm (112.2 in)[3]
Length4,884 mm (192.3 in)
Width1,734 mm (68.3 in)
Height1,746 mm (68.7 in)
Curb weight1,550 kg (3,417.2 lb)
Chronology
PredecessorToyota AA and AB

The AC was similar to the AA, with only minor alternations to the body. The front glass was now a split into left and right halves with thick metal body work between them.

Dates and production figures

[edit]
1943 Toyota Model AC rear view

Design work began in 1938. A total of 115 AC sedans was produced from 1943 until 1948 with no direct replacement as production efforts focused on the much smaller SA. Forty-three were produced in 1943, 19 in 1944 (until February), and 50 units were made from spares in 1947 for a military order, with a final three being built in 1948. No Toyota passenger car production occurred in the years 1945 and 1946, although what would become the first post-war car, the SA, was in development during these years.

During the retro craze of the 1990s-2000s, Toyota would capitalize on the styling of the original AA/AB/AC series to create the Toyota Classic. Based on the Toyota Hilux chassis, the Classic incorporated classic sedan styling with streamlined features but modern amenities. Nevertheless, no more than 100 vehicles were ever produced and today it is very rare.

Mechanicals

[edit]

The mechanicals were similar to the AA and AB.

AE

[edit]
Toyota AE
Overview
ManufacturerToyota
Production1941–1943
Body and chassis
Classmedium size family car
Body stylesedan
LayoutFR layout
Powertrain
Engine2.3 L Type C I4
Transmission3-speed manual
Dimensions
Wheelbase2,500 mm (98.4 in)[3]
Length4,500 mm (177.2 in)
Width1,730 mm (68.1 in)
Height1,635 mm (64.4 in)
Curb weight1,220 kg (2,689.6 lb)

The AE sedan was a smaller car than the related AA, AB, and AC models.

Dates and production figures

[edit]

The AE was developed during 1939, and a prototype was completed in September of that year. The model was introduced at the beginning of 1940. However, production occurred from 1941 to 1943. Only 76 of this model were built.[8][9]

Mechanicals

[edit]

The mechanicals were similar to the AA except that it had the Type C engine, which was a Type A with two cylinders removed.

Prototypes not put into production

[edit]

EA

[edit]
Toyota EA
Overview
ManufacturerToyota
Production1938 (prototypes)
AssemblyKoromo, Japan
Body and chassis
ClassSubcompact family car
Body style2-door saloon
LayoutFF layout
RelatedDKW F7
Powertrain
Engine585 cc Type E I2 two-stroke
Dimensions
Wheelbase2,610 mm (102.8 in) [3]
Length3,220 mm (126.8 in)
Width1,300 mm (51.2 in)
Height1,250 mm (49.2 in)
Curb weight650 kg (1,433 lb)

Kiichiro Toyoda designed the EA as a copy of the DKW F7 sedan in 1938 but production was prevented by war time restrictions.[3]

Dates and production figures

[edit]

The EA was designed in 1938 but did not go into production.

Mechanicals

[edit]

A small front-mounted, 2-cylinder, 2-stroke Type E engine connected as front-wheel drive.

EB

[edit]

The EB was a rear-wheel-drive minicar derived from the DKW-inspired EA type, but production was prevented by wartime restrictions.[10]

Dates and production figures

[edit]

The EB was designed in 1938 but did not go into production.

Mechanicals

[edit]

A small front-mounted, 2-cylinder, 2-stroke Type E engine installed at the front and driving the rear wheels.

BA

[edit]

The BA was an austerity sedan, and used wood in its framing to conserve metal. This model is said to have been based on the Volvo PV 60,[8][11] but this is open to question, since the PV60 was not introduced until 1944, and did not enter production until 1946. Most of the prototypes of this Volvo were built in the 1942–1944 period. There is anecdotal information regarding a 1939 PV60 prototype, but the data is sketchy and no photos exist.[12]

Dates and production figures

[edit]

The BA was introduced and first produced in 1940. No more than 17 were built.[9] Some sources, however, claim the model did not enter production, such as it was, until 1943, with one giving the date of June 1943.[8][11] But judging from 1943's production figures, the majority of which would have to represent the AC, it would not seem to be the case that all 17 BA production cars were built that year. The production of the 17 cars may have occurred in 1940 and 1943, or perhaps it was stretched over the 1940–1943 period, with the last few being completed in 1943, when the model was said to have started "official" production. Support for the notion that at least a few of these cars were produced in 1943 would come from a photograph (obtained from Toyota Motor Co. Ltd.) of a BA captioned as "1943 Totoya Model BA 4-cylinder saloon" in at least one source.[13]

BB phaeton

[edit]

One example of the Model BB phaeton was built, in 1941.[9] It resembled a contemporary Chevrolet.

B/BC

[edit]

Two[9] or three[14] examples of a luxury sedan, known as the Model B (or Model BC, according to one source[15]), were built. Although one source associates this model with the year 1942,[14] most claim the prototypes were built in 1944.[8][11][15] This was the last passenger car development until after the war ended.

Toyota passenger car production from 1935 to 1949

[edit]

The following table is a portion of that put out by Toyota, and represents passenger car production only, apparently not including prototypes:

1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949
0
100
577
539
107
268
208
41
53
19
0
0
54
21
235

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Toyota AA

View on Grokipedia
from Grokipedia
The Toyota AA, also known as the Toyoda Model AA, was the first production passenger car developed and manufactured by what would become Toyota Motor Corporation, introduced in 1936 as a 4-door sedan featuring streamlined styling inspired by 1930s American automobiles. Developed under the leadership of Kiichiro Toyoda at the Toyoda Automatic Loom Works, it evolved from the earlier A1 prototype and drew design influences from models like the Chevrolet and Chrysler DeSoto, emphasizing balanced weight distribution for improved ride quality. Powered by a water-cooled, overhead-valve inline-6 engine with 3,389 cc displacement producing 65 horsepower at 3,000 rpm, the AA measured 4,785 mm in length, 1,730 mm in width, and 1,736 mm in height, with a wheelbase of 2,850 mm and a curb weight of 1,500 kg. Production ran from 1936 to 1942 at a newly built assembly plant in Kariya, Japan, yielding 1,404 units before wartime constraints led to its replacement by the simpler AC model. This vehicle marked Toyota's pivotal entry into the automotive industry, fostering in-house technology development and culminating in the establishment of Toyota Motor Co., Ltd. in 1937; only one unrestored original survives today, discovered in Russia and now housed in the Louwman Museum in the Netherlands.

Development and Background

Company Origins

Toyoda Automatic Loom Works, Ltd. was founded in 1926 by , an inventor known for developing automatic looms, with the company initially focused on and selling these machines in Kariya, . son, , joined the family business and played a pivotal role in its diversification; in , he established an Automotive Production Division within the loom works to pursue automobile , leveraging the company's engineering expertise from precision machinery. The decision to enter the automotive sector was influenced by Japan's rapid industrialization in and global economic shifts, including the aftermath of the 1923 Great Kanto Earthquake, which highlighted the limitations of and spurred a surge in vehicle imports from the . The Japanese government actively supported domestic auto production to reduce reliance on foreign imports and foster industrial self-sufficiency, creating an opportune environment for companies like Toyoda to invest in this field. Funding for the venture came from the 1929 sale of loom patents to British firm Platt Brothers, which provided Kiichiro with approximately 100,000 pounds to study international automotive technologies during trips to the and . In 1934, the division acquired and disassembled American vehicles, including a Chevrolet sedan and a DeSoto sedan, to analyze their designs and components as benchmarks for development. In 1936, ahead of full-scale production, the company rebranded from Toyoda to to mark the new automotive focus; the name "" was chosen for its simplicity—requiring only eight strokes in Japanese kanji compared to ten for "Toyoda"—and because it was considered auspicious, symbolizing prosperity. This change, decided through an internal competition, helped establish a distinct identity for the automobile operations, which spun off into the following year.

Prototype Development

In 1929, Kiichiro Toyoda traveled to the United States and Europe to study automobile manufacturing techniques, where he was particularly inspired by the engineering of American models such as the Chrysler Airflow's aerodynamic body design and the Chevrolet's inline-six engine configuration. These influences shaped the development of Toyota's first passenger car prototypes, emphasizing balanced weight distribution, spacious interiors, and reliable powertrains suitable for emerging markets like Japan. The A1 prototype was constructed at the prototype plant established in Kariya in 1934 for automotive development. Assembly faced significant challenges due to the lack of advanced tooling; stamping molds for body panels were delayed by an estimated 1.5 years, forcing the team to rely on hand-forged work and imported components, including Chevrolet-sourced crankshafts and camshafts. Despite these hurdles, three A1 prototypes were completed by May 1935, less than two years after the automotive division's formation in September 1933. Testing occurred on Japanese public roads, where personally drove one of the prototypes to his father's grave. This phase revealed the need for adaptations to local conditions, such as refining the chassis for narrower, rougher roads compared to American standards. Initial engine tests produced only 48-49 horsepower, prompting key modifications including a redesigned to incorporate a , which boosted output to 65 horsepower at 3,000 rpm. None of the A1 prototypes survive today, but their iterative development directly informed the transition to production models. The prototypes were not publicly unveiled at a formal motor show in 1935, as the first Tokyo Motor Show occurred later in 1954; instead, they underwent internal evaluation to refine designs for mass production.

Design and Specifications

Engine and Mechanical Components

The Toyota AA featured the Type A engine, a water-cooled inline six-cylinder unit with overhead valves and a cast-iron block, displacing 3,389 cc and producing 65 PS (approximately 64 hp) at 3,000 rpm. This engine was derived from the Chevrolet six-cylinder design, which Toyota engineers reverse-engineered after studying imported American vehicles. Power was delivered through a three-speed with synchromesh on the second and third gears, paired with via a live rear . The suspension system included a rigid front with a transverse , while the rear utilized a rigid with semi-elliptic s for load support. Braking was handled by hydraulic drum brakes on all four wheels, consistent with contemporary American influences. Key dimensions included a of 2,850 mm and a curb weight of 1,500 kg, contributing to the vehicle's stable handling and capacity. The system employed a single for the inline-six, supporting efficient operation in line with engineering standards, while the electrical setup used a 6-volt battery for ignition and accessories. These mechanical components formed the core of the AA's , emphasizing reliability and simplicity drawn from Chevrolet precedents.

Body and Chassis Design

The Toyota AA featured a ladder frame chassis constructed from pressed steel, providing a modern and rigid foundation for the vehicle's body compared to contemporary fabric-over-wood designs common in Japan at the time. This construction emphasized structural integrity and balanced weight distribution, with a wheelbase of 2,850 mm to support stable handling and passenger comfort. The primary body style was a four-door sedan with an all-steel construction, incorporating integrated fenders, a rounded hood, and a rear profile for improved and streamlined . A phaeton variant, known as the AB model, offered an open-top configuration with a , rear-hinged doors, and no side windows, primarily intended for use though available commercially. Exterior dimensions measured 4,785 mm in length, 1,730 mm in width, and 1,736 mm in height, with body panels accented by chrome on the grille and bumpers for a refined appearance. The interior accommodated five passengers via front and rear bench seats, upholstered in cloth or optional , within a spacious cabin designed to prioritize rear-seat comfort and legroom. The included basic analog gauges for speed, , and engine temperature, with no radio as a standard feature, reflecting the utilitarian focus of the era's . Design influences drew heavily from American models, with the chassis and electrics adapted from Ford components and the overall styling, including aerodynamic cues, directly inspired by the 1934 DeSoto Airflow to suit Japanese roads and preferences. This adaptation marked Toyota's early emphasis on blending foreign innovation with local manufacturing capabilities.

Production Variants

A1 Prototype

The A1 prototype represented Toyota's inaugural foray into passenger car development, serving as the foundational pre-production model for what would become the AA series. Completed in May 1935, it was hand-assembled using a combination of in-house manufactured cast components, such as the , block, and pistons, alongside imported genuine Chevrolet parts for critical elements including the , , valves, spark plugs, and electrical systems. The body design drew inspiration from the streamlined 1934 DeSoto sedan and was crafted via hand-forged rather than stamped molds, reflecting the nascent stage of Toyota's manufacturing capabilities at the time. Development of the A1 emphasized rapid prototyping to meet ambitious production goals, with the project originating in September 1933 under Kiichiro Toyoda's leadership. The prototype's Type A , a 3.4-liter inline-six, underwent initial bench testing in a Chevrolet chassis, initially producing 48-49 horsepower before refinements to the boosted output to 65 horsepower at 3,000 rpm. This integration marked a pivotal step, addressing early challenges like the complex water jacket core for the cylinder block, which was resolved by adapting oil core techniques by August 1934. The A1's construction highlighted Toyota's transition from loom manufacturing to automotive assembly, relying heavily on external sourcing to compensate for limited domestic tooling. As the direct precursor to series production, the A1 underwent validation to inform refinements for the AA model, which featured only minor adjustments for manufacturability and reliability. Three A1 prototypes were built, underscoring their experimental nature, and none survive today, believed to have been scrapped during wartime resource constraints or subsequent development iterations. This prototype's successful completion validated Toyota's engineering approach, paving the way for the AA's launch in and establishing the company's automotive legacy.

AA and AB Models

The Toyota Model AA sedan marked the company's entry into passenger car production, with manufacturing commencing in April 1936 at the Kariya plant. It was publicly announced in in July 1936 and in in September of that year, featuring a four-door closed body with streamlined styling inspired by contemporary American designs like the Chevrolet. Priced at 3,350 yen in —approximately 400 yen less than imported competitors—the AA targeted affluent Japanese buyers seeking a domestically produced luxury vehicle. In 1936, introduced the Model AB phaeton as an open-top variant of , offering a four-door body with a folding top and front-hinged rear doors for improved accessibility, differing from the AA's rear-hinged design. The AB's was adapted from the AA with modifications to the frame for structural integrity in the open configuration, while both models shared the standard Type A inline-six engine, producing 65 horsepower. A total of 353 AB units were built between 1936 and 1938, reflecting limited demand for the convertible style. Overall, the and AB models achieved modest production success in their initial run, with 1,404 AA sedans manufactured through 1942, though early output focused on the domestic market. Aimed primarily at Japan's elite due to the high cost relative to average incomes, the vehicles saw minimal exports, limited to small numbers in amid the era's economic constraints and Toyota's nascent status. Reception was positive among early adopters for their ride comfort and modern aesthetics, establishing Toyota's reputation in passenger cars before wartime disruptions.

AC Model

The Toyota Model AC was developed in 1938 as an enhanced version of the earlier AA and AB passenger cars, incorporating the newly introduced Type B engine to meet specifications requested by the Japanese army amid escalating wartime needs. Although design work began pre-war, full production did not commence until March 1943 at the Koromo Plant due to restrictions on civilian vehicle manufacturing. The AC retained the core body design principles from the AA sedan but featured a simplified, more utilitarian construction suited for military applications. Only sedan body styles were produced, with no phaeton variant offered, reflecting the shift toward practical, enclosed designs during wartime. A total of 65 units were built before passenger production was banned in 1944, followed by an additional 50 units in 1947 for use by foreign trade representatives, bringing the overall production to 115 vehicles. Key mechanical updates included the adoption of the Type B inline-six , which displaced 3,386 cm³ and delivered 75 PS (approximately 74 hp) at 3,200 rpm, an increase from the AA's Type A engine output of 65 hp. This featured a raised of 6.0:1 compared to the Type A's 5.42:1, contributing to the power gain while maintaining overhead valve (OHV) configuration and . The chassis underwent minor refinements, including a wheelbase of 2,850 mm (same as ), along with a switch to the system in place of the torque tube setup for improved durability under load. Exterior changes emphasized , such as a body-colored radiator grille, elimination of chrome trims, and a two-piece for better visibility and ease of production. Interior appointments were basic, with enhanced materials focused on longevity rather than luxury, aligning with feedback on the AA's durability in demanding conditions. Overall dimensions measured 4,884 mm in length, 1,734 mm in width, and 1,746 mm in height, with a curb weight of 1,550 kg. These modifications addressed early wartime preparations by prioritizing reliability and ease of maintenance, making the AC one of the few passenger vehicles produced in before the complete halt in civilian output. The model's limited run underscored Toyota's pivot toward military and truck production, though the post-war units marked the company's resumption of passenger car assembly.

AE Model

The Toyota AE represented the culminating production variant in Toyota's early passenger car series, introduced in as a medium-sized sedan engineered to align with the Automobile Industry Law enacted by the Japanese to standardize and promote domestic automotive production. Announced on November 1, , at the Koromo Plant to commemorate the Year 2600 of the Jimmu era, the AE featured a more compact four-door sedan body compared to the larger AA model, incorporating shared components from prior variants to streamline manufacturing amid emerging resource limitations. Production of the AE commenced in February 1941, after Toyota secured a limited allocation of raw materials conditional on prioritizing output, resulting in just 76 units assembled before operations ceased in July 1943. A related Model BA variant, produced alongside at 17 units, substituted wooden elements for metal parts to conserve scarce wartime resources, highlighting adaptive strategies in body construction. The AE's design emphasized practicality, with principal mechanical elements derived from the series, including a reinforced suited for the era's demanding conditions, though specific styling updates like grille refinements were minimal due to production constraints. At its core, the AE retained the inline-four Type C engine, a downsized derivative of the six-cylinder Type A used in earlier models, with a displacement of 2,258 cm³ and maximum output of 48 PS (35 kW) at 2,800 rpm—a reduction from the Type A's 65 PS, attributable to the smaller configuration and wartime adjustments for fuel conservation amid material and fuel shortages. The water-cooled OHV engine powered a rear-wheel-drive layout with a three-speed , delivering modest performance in a measuring 4,500 mm long, 1,730 mm wide, 1,635 mm high, on a 2,500 mm , and weighing 1,220 kg . Ventilation and other interior features were carried over with basic enhancements for reliability, but no major overhauls were implemented given the focus on resource efficiency. The AE's production run ended abruptly in 1943 as World War II intensified, with Toyota redirecting all efforts to military trucks and aircraft components under government mandates, effectively concluding the company's prewar passenger car era and underscoring the model's role as a bridge to postwar reconstruction.

Unproduced Prototypes

EA Model

The Toyota EA was developed as a compact passenger car prototype in response to the need for a more affordable vehicle aimed at broader market appeal. Initiated in 1936 following the study of a DKW compact car acquired from Germany, prototype production began around June 1937 at a section of the Kariya Assembly Plant. Assembly later shifted to the Koromo Plant, with further work continuing into 1940 at Kariya's electrical components facility. A total of ten prototype units were completed, featuring front-wheel drive and a design inspired by the DKW F7 sedan. Key specifications included a 2-stroke, 2-cylinder Type E with 584 cc displacement, producing 18 hp at 3,200 rpm (bore 74 mm, stroke 68 mm). The had a of 2,610 mm, overall length of 3,220 mm, width of 1,300 mm, and a weight of 650 kg. The body was constructed using a wooden model at the Kariya auto body plant, emphasizing lightweight construction for the small sedan format. Despite completing the prototypes, the EA did not enter due to escalating wartime restrictions and material shortages that plagued Japan's from 1937 onward. A system for production materials implemented in 1939 further hindered passenger car development, shifting priorities toward military vehicles and trucks. The prototypes were left unused at the Kariya Plant after initial testing, and the project was ultimately shelved. This effort influenced subsequent unproduced designs, such as the rear-engine EB and electric EC prototypes.

EB Model

The EB model represented an early experimental effort by Toyota to adapt its small passenger car prototype for a rear-engine, rear-wheel-drive layout. Developed concurrently with the front-wheel-drive EA prototype at the Tokyo Shibaura Plant around 1940, the EB aimed to explore alternative drivetrain configurations for compact vehicles suitable for Japan's limited infrastructure and potential export markets. Mechanically, the EB retained the core components of the EA, including a licensed two-cylinder, two-stroke engine with 584 cc displacement that produced 18 hp at 3,200 rpm, paired with an independent suspension system inspired by German DKW designs. This powertrain, while modest, emphasized lightweight construction and simplicity for urban and rural use, though specific body details for the EB—such as a potential two-door saloon configuration—remain undocumented beyond its classification as a small passenger car. The shared engine lineage with the EA traced back to pre-production research rather than the larger Type A inline-six used in models like the AA. Testing and development of the EB were curtailed by escalating tensions, with Japan's government imposing strict limits on passenger vehicle production by late to prioritize military needs. No records indicate extensive road testing or performance evaluations, and the was shelved without advancement to production, reflecting the broader challenges faced by Toyota's nascent automotive division amid wartime constraints.

BA and BB Models

The BA and BB models were prototype passenger cars developed by in 1940–1941 under Kiichiro Toyoda's directive issued on September 13, 1940, to advance research into future civilian vehicles amid escalating war demands. The BA was a 4-door sedan, while the BB was its phaeton variant with an open-top body style completed in 1941 and a of 2,600 mm. Both utilized the Type B engine, a 3.4 L inline-six producing 75 hp, emphasizing durability suitable for both civilian and potential utility applications. The interior was utilitarian, prioritizing function over luxury to align with wartime material constraints and postwar recovery needs. The BA was also adapted for six experimental electric vehicles in 1941 using storage batteries and electric motors. Intended for postwar civilian production to expand Toyota's passenger car lineup, development ceased due to resource shortages and priorities, limiting output to just two units—one BA sedan and one BB phaeton. The wartime context similarly curtailed ongoing production of earlier models like , shifting focus to and outputs.

B and BC Models

The Model B was developed in as a basic featuring a 4x2 configuration and cab-forward , intended as a derivative with potential for passenger adaptations. It was powered by a 3.4 L inline-six Type B engine producing 75 horsepower. The BC model represented an armored variant of the B, incorporating additional plating for protection and modifications for improved off-road capability; it underwent testing in 1942. Key specifications for both prototypes included a payload capacity of 1,000 kg and a top speed of 70 km/h. Neither the B nor BC entered production due to wartime resource shortages that prioritized military needs over new vehicle development. Although no passenger body was pursued for these trucks, their design elements influenced postwar models such as the SB truck.

Production and Legacy

Overall Production Figures

The Toyota AA and its subsequent variants represented Toyota's initial foray into passenger car manufacturing, with production of the AA sedan totaling 1,404 units from 1936 to 1942, and the AB phaeton adding 353 units from 1936 to 1938, for a combined total of approximately 1,757 units at the Kariya plant initially (from 1936) and later the Koromo plant (from 1938). Wartime variants included the AE (76 units, 1941–1943) and AC (115 units, 1943–1947), produced in limited numbers primarily for military use. Initial sales were hampered by the model's high price of 3,350 yen, which approximated an average Japanese worker's annual salary at the time, limiting demand in a market dominated by imported vehicles and economic recovery efforts following the Great Depression. By the late 1930s, as the Second Sino-Japanese War intensified and evolved into full-scale World War II involvement, government rationing of steel, rubber, and fuel prioritized military production, drastically curtailing passenger car assembly and shifting resources to trucks and other war materiel, with civilian output largely ceasing by 1942. This low-volume output underscored the challenges of establishing domestic automobile manufacturing, with passenger cars comprising only about 10% of Toyota's total vehicle production during the —trucks outnumbered cars by a ratio of roughly 10:1, reflecting the era's emphasis on commercial and military transport over civilian sedans.

Surviving Examples and Replicas

The Toyota AA is exceedingly rare today, with only one known surviving original example from its production run of 1,404 AA sedan units between and 1942. Most were scrapped during to support Japan's war effort, as civilian vehicles were dismantled for metal and parts. This sole survivor, a sedan, was discovered in 2008 on a near , , where it had been used as a utilitarian workhorse since the war, undergoing heavy modifications including a replaced grille, headlamps, and body alterations. The vehicle, acquired after a seven-month negotiation process, remains unrestored in its "as-found" condition and is now on display at the in , . Due to the absence of original examples at the time, constructed a faithful of a 1936 AA sedan in 1987 to commemorate the company's 50th anniversary. Built using period-correct parts and engineering drawings, this captures the original's streamlined design and 3.4-liter inline-six engine, and it has been a permanent exhibit at the in , , ever since. Another , also assembled by in 1989, resides in the collection of comedian and car enthusiast in the United States, where it serves as a drivable to the model's historical significance. These surviving example and replicas underscore the AA's pivotal role in Toyota's origins, preserving its legacy amid the scarcity of wartime-era Japanese automobiles. Restorations and displays of AA-inspired vehicles have occasionally appeared in and the U.S. through private efforts, but no additional original chassis have surfaced to date.

References

  1. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section2/item6.html
  2. https://toyota-automobile-museum.jp/en/archives/car-database/detail.html?id=68
  3. https://www.slashgear.com/1515183/a-look-at-toyota-first-car-model-aa/
  4. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section8/item3_d.html
  5. https://mag.toyota.co.uk/toyoda-model-aa-finding-the-worlds-oldest-toyota/
  6. https://www.toyota-industries.com/company/history/toyoda_sakichi/
  7. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section2/item1.html
  8. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section1/item1.html
  9. https://toyota-automobile-museum.jp/en/facilities/exhibition/car/2f/
  10. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter1/section4/item2.html
  11. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section2/item3.html
  12. https://support.toyota.com/s/article/What-is-the-origin-of-7650
  13. https://www.automotivehalloffame.org/toyoda-to-toyota/
  14. https://www.automotivehalloffame.org/honoree/kiichiro-toyoda/
  15. https://www.toyota.co.uk/discover-toyota/stories-news-events/where-it-all-began-aa
  16. https://www.tcmit.org/english/about/ktcmit
  17. https://www.toyota-global.com/company/history_of_toyota/75years/vehicle_lineage/car/id60011174/index.html
  18. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section8/item3_a.html
  19. https://www.automobile-catalog.com/model/toyota/aa.html
  20. https://www.carfolio.com/toyoda-model-aa-319737
  21. https://mag.toyota.co.uk/toyota-model-ab-phaeton/
  22. https://toyota-automobile-museum.jp/en/archives/car-database/detail.html?id=23
  23. https://toyota-automobile-museum.jp/en/archives/car-database/detail.html?id=297
  24. https://www.toyota-global.com/company/history_of_toyota/75years/vehicle_lineage/car/id60011184/index.html
  25. https://www.toyota-global.com/company/history_of_toyota/75years/vehicle_lineage/car/id70000035/index.html
  26. https://toyota-automobile-museum.jp/en/archives/car-database/detail.html?id=24
  27. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section4/item8.html
  28. https://www.toyota-global.com/company/history_of_toyota/75years/vehicle_lineage/car/id70000036/index.html
  29. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section5/item8.html
  30. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section5/item10.html
  31. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section4/item5.html
  32. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section5/item8_b.html
  33. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section5/item8_a.html
  34. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section5/item6.html
  35. https://www.toyota-global.com/company/history_of_toyota/75years/text/taking_on_the_automotive_business/chapter2/section8/item1_d.html
  36. https://www.toyota-global.com/company/history_of_toyota/75years/data/automotive_business/production/production/japan/production_volume/index.html
  37. https://www.oldcarsweekly.com/news/double-a-discovery-how-toyota-found-first-production-model
  38. https://japanesenostalgiccar.com/jay-leno-drives-a-toyotas-1936-toyoda-aa/
Add your contribution
Related Hubs
User Avatar
No comments yet.