Hubbry Logo
Gemini Guidance ComputerGemini Guidance ComputerMain
Open search
Gemini Guidance Computer
Community hub
Gemini Guidance Computer
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Gemini Guidance Computer
from Wikipedia
Gemini Guidance Computer
Gemini Guidance Computer in National Air and Space Museum
Invented byIBM Federal Systems Division
ManufacturerIBM Federal Systems Division
Introduced1965; 60 years ago (1965)
Discontinued1966; 59 years ago (1966)
TypeAvionics
Guidance Computer
ProcessorDiscrete Components[1]
Frequency7.143 kilohertz clock
Memory39-bit words memory, each composed of three 13-bit syllables, 4,096 words of memory, in a ferrite core array
PortsModular Display Keyboard (MDK), Modular Display Readout (MDR), Attitude Control and Maneuver Electronics (ACME), Inertial Measurement Unit (IMU), Horizon Sensors, Time Reference System (TRS)[2]
Weight58.98 lb (26.75 kg)
Dimensions18.9 in × 14.5 in × 12.75 in (48.0 cm × 36.8 cm × 32.4 cm) (H)×(W)×(D)

The Gemini Guidance Computer (sometimes Gemini Spacecraft On-Board Computer, OBC) was a digital, serial computer designed for Project Gemini, America's second human spaceflight project.[3] The computer, which facilitated the control of mission maneuvers, was designed by the IBM Federal Systems Division.[4]

Functionality

[edit]
Locations of the Gemini Guidance System

Project Gemini was the first with an on-board computer, as Project Mercury was controlled by computers on Earth.[5] The Gemini Guidance Computer was responsible for the following functions:[4][3]

  • Ascent – serves as a backup guidance system. The switchover is manually controlled by the astronauts
  • Orbital flight – gives the astronauts the capacity to navigate, allowing them to choose a safe landing spot in an emergency and calculate the timing of retrofire (on extended missions ground data may become unavailable when ground data network rotates out of the orbital plane).
  • Rendezvous – serves as primary reference by providing guidance information to the astronauts. The orbit parameters are determined by the ground tracking which are then sent to the spacecraft; the guidance computer was responsible for processing the information along with sensed spacecraft attitude. The information was presented to the astronauts in terms of spacecraft coordinates.
  • Reentry – feeds commands directly to the reentry control system for automatic reentry or provides the guidance information to the astronauts for manual reentry.

Specs

[edit]
  • The computer was architecturally similar to the Saturn Launch Vehicle Digital Computer, in particular in the instruction set;[6] however its circuit integration was less advanced.[7] The GGC weighed 58.98 pounds (26.75 kg) and was powered by 28V DC. During a short power outage it could be powered by the Auxiliary Computer Power Unit (ACPU).
  • 39-bit words memory, each composed of three 13-bit syllables[6]
  • Ferrite core memory of 4,096 words[8]
  • Two's complement integer arithmetic
  • 7.143 kilohertz clock (140 μs per instruction); all instructions took a single cycle except for multiplication and division

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia
Add your contribution
Related Hubs
User Avatar
No comments yet.