Hubbry Logo
MonomerMonomerMain
Open search
Monomer
Community hub
Monomer
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Monomer
Monomer
Monomer
View on Wikipedia
from Wikipedia

A monomer (/ˈmɒnəmər/ MON-ə-mər; mono-, "one" + -mer, "part") is a molecule that can react together with other monomer molecules to form a larger polymer chain or two- or three-dimensional network in a process called polymerization.[1][2][3]

IUPAC definition

Monomer molecule: A molecule which can undergo polymerization, thereby contributing constitutional units to the essential structure of a macromolecule.[4]

Classification

[edit]

Chemistry classifies monomers by type, and two broad classes based on the type of polymer they form.

By type:

By type of polymer they form:

Differing stoichiometry[5] causes each class to create its respective form of polymer.

This nylon is formed by condensation polymerization of two monomers, yielding water

The polymerization of one kind of monomer gives a homopolymer. Many polymers are copolymers, meaning that they are derived from two different monomers. In the case of condensation polymerizations, the ratio of comonomers is usually 1:1. For example, the formation of many nylons requires equal amounts of a dicarboxylic acid and diamine. In the case of addition polymerizations, the comonomer content is often only a few percent. For example, small amounts of 1-octene monomer are copolymerized with ethylene to give specialized polyethylene.

Synthetic monomers

[edit]

Biopolymers

[edit]

The term "monomeric protein" may also be used to describe one of the proteins making up a multiprotein complex.[6]

Natural monomers

[edit]

Some of the main biopolymers are listed below:

Amino acids

[edit]

For proteins, the monomers are amino acids. Polymerization occurs at ribosomes. Usually about 20 types of amino acid monomers are used to produce proteins. Hence proteins are not homopolymers.

Nucleotides

[edit]

For polynucleic acids (DNA/RNA), the monomers are nucleotides, each of which is made of a pentose sugar, a nitrogenous base and a phosphate group. Nucleotide monomers are found in the cell nucleus. Four types of nucleotide monomers are precursors to DNA and four different nucleotide monomers are precursors to RNA.

[edit]

For carbohydrates, the monomers are monosaccharides. The most abundant natural monomer is glucose, which is linked by glycosidic bonds into the polymers cellulose, starch, and glycogen.[7]

Isoprene

[edit]

Isoprene is a natural monomer that polymerizes to form a natural rubber, most often cis-1,4-polyisoprene, but also trans-1,4-polymer. Synthetic rubbers are often based on butadiene, which is structurally related to isoprene.

See also

[edit]

Notes

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Monomer

View on Grokipedia
from Grokipedia
A monomer is a small, simple that serves as a repeating unit, capable of chemically bonding with other identical or similar monomers through covalent linkages to form a larger known as a via a process called . These building blocks typically feature reactive functional groups, such as double bonds or hydroxyl groups, that facilitate the formation of polymer chains or networks. Monomers are fundamental to , enabling the creation of materials with diverse properties depending on the monomer structure and bonding arrangement. Monomers can participate in different types of polymerization reactions, broadly categorized as addition or chain-growth polymerization and condensation or step-growth polymerization. In addition polymerization, monomers like ethylene (CH₂=CH₂) link without loss of byproducts to form polymers such as polyethylene, a common plastic used in packaging and pipes. Condensation polymerization involves monomers with two or more functional groups, such as amino acids, which combine with the elimination of water to produce polyamides like proteins. Other notable examples include glucose as the monomer for carbohydrates like starch and cellulose, nucleotides for nucleic acids such as DNA, and styrene for polystyrene, a versatile material in foams and containers. The significance of monomers extends across synthetic and biological systems, where they enable the production of essential materials and biomolecules that support modern industry and life processes. Synthetic polymers derived from monomers like (for PVC) and (for rubber) are ubiquitous in everyday items, from to tires, due to their tunable mechanical and thermal properties. In , monomers form critical macromolecules: for instance, the of creates proteins that perform enzymatic and structural roles, while monomers build for genetic information storage. Advances in monomer design continue to drive innovations in sustainable materials, such as bio-based polymers from renewable sources, highlighting their role in addressing environmental challenges.

Fundamentals

Definition and Etymology

A monomer is a small molecule, typically organic, that serves as a building block capable of reacting with other similar molecules to form larger macromolecules known as polymers, usually through the formation of covalent bonds. This process, polymerization, links multiple monomers into extended chains or networks, enabling the creation of materials with diverse properties essential to both natural and synthetic applications. The term "monomer" derives from the Greek roots mono- meaning "single" or "one" and meros meaning "part" or "unit," reflecting its role as an individual component in a larger structure. First appearing in chemical literature around , the word was coined to describe compounds that could combine to form polymers, marking a shift in understanding molecular assembly within . In the early , the concept of monomers gained prominence as organic chemists sought to differentiate these reactive units from the resulting polymers, laying the groundwork for modern . German chemist played a pivotal role in this development during the by proposing that polymers consist of long chains of covalently bonded monomers, challenging prevailing aggregate theories and establishing the macromolecular hypothesis. His foundational contributions were recognized with the 1953 for research on the structure of macromolecules.

Key Properties

Monomers exhibit chemical reactivity primarily through the presence of functional groups, such as carbon-carbon double bonds in vinyl monomers or hydroxyl groups in types, which facilitate the formation of covalent bonds during . This reactivity is modulated by factors including at the reactive site, which influences nucleophilicity or electrophilicity, and steric hindrance from adjacent substituents that can impede approach of reactive species. Many monomers, particularly synthetic organic ones, are small molecules with low molecular weights typically below 500 Da and exist as liquids or gases at due to weak intermolecular forces, which contributes to their volatility and ease of handling in processes. Their aligns with the principle of "like dissolves like," where polar monomers dissolve in polar solvents and nonpolar ones in nonpolar media, enabling effective dispersion in reaction mixtures. Monomers are generally thermodynamically stable compounds, meaning their isolated structures represent energy minima, but they become kinetically reactive upon , such as by free radicals or ions that activate the functional groups for propagation. This dual nature allows a single monomer type to form homopolymers when polymerized alone or copolymers when combined with compatible monomers, depending on reactivity ratios that dictate incorporation rates. High purity of monomers is crucial in , as even trace impurities can act as agents or terminators, leading to defects like irregular chain lengths, branching, or incomplete conversion in the resulting polymers. Rigorous purification techniques, such as or , are thus employed to minimize these issues and ensure reproducible polymer properties.

Polymerization Processes

Chain-Growth Polymerization

Chain-growth polymerization is a process in which monomers add sequentially to a growing polymer chain through addition reactions, typically involving unsaturated monomers like olefins, without the loss of by-products. This mechanism proceeds in three main stages: initiation, propagation, and termination. In the initiation step, an initiator generates an active species—such as a free radical, anion, or cation—that reacts with the first monomer to form a reactive chain end. Propagation follows, where the active chain end repeatedly adds monomers, extending the chain rapidly. Termination occurs when two active chain ends combine, disproportionate, or undergo chain transfer, halting growth. A classic example is the polymerization of ethylene, represented by the equation: n\ceCH2=CH2→[−\ceCH2−CH2−]nn \ce{CH2=CH2} \rightarrow [-\ce{CH2-CH2}-]_n This process yields high molecular weight polymers early in the reaction, distinguishing it from other mechanisms. The types of chain-growth polymerization vary based on the nature of the active species. Free radical polymerization, the most common, is initiated by radicals from decomposable compounds like peroxides or azo compounds, such as azobisisobutyronitrile (AIBN), which thermally decomposes to form radicals that add to the monomer. Anionic polymerization employs strong bases like n-butyllithium (n-BuLi) to generate carbanions, suitable for monomers with electron-withdrawing groups, allowing for living polymerization with narrow molecular weight distributions under controlled conditions. Cationic polymerization uses Lewis or Brønsted acids, such as BF₃ or H₂SO₄, to produce carbocations, effective for monomers like isobutylene. The kinetics of these processes follow a chain reaction model, where the overall rate of polymerization is given by Rp=kp[M][P∗]R_p = k_p [M] [P^*], with kpk_p as the propagation rate constant, [M] the monomer concentration, and [P^] the concentration of active chains; in free radical systems, [P^] is proportional to the square root of initiator concentration due to radical termination./02%3A_Synthetic_Methods_in_Polymer_Chemistry/2.04%3A_Cationic_Polymerization) Chain-growth polymerization offers advantages such as rapid production of high molecular weight polymers and versatility with simple unsaturated monomers, enabling industrial-scale synthesis of materials like polyethylene and polystyrene. However, conventional methods, particularly free radical, often result in broad polydispersity indices (PDI > 1.5) due to uncontrollable termination and transfer reactions, offering less precise control over molecular weight distribution compared to some alternative processes. In contrast, living variants like anionic polymerization can achieve PDI near 1.0, though they require stringent anhydrous conditions. These characteristics make chain-growth ideal for thermoplastics but challenging for applications demanding uniform chain lengths.

Step-Growth Polymerization

Step-growth polymerization is a process in which monomers, typically possessing two functional groups, react progressively to form polymers through the coupling of these groups, often eliminating small byproduct molecules. This mechanism proceeds via initial formation of dimers and oligomers (), followed by chain extension through reactions between any compatible functional groups on growing species (growth), with potential side pathways leading to cyclic structures (cyclization). A representative example is the formation of polyesters from bifunctional monomers such as diols and dicarboxylic acids, described by the equation: n \ceHO−R−OH+n \ceHOOC−R′−COOH→\ce[−O−R−OOC−R′−CO−]n+2n \ceH2On \, \ce{HO-R-OH} + n \, \ce{HOOC-R'-COOH} \rightarrow \ce{[-O-R-OOC-R'-CO-]_n} + 2n \, \ce{H2O} This condensation reaction highlights the role of functional group reactivity in driving polymer chain assembly. The kinetics of step-growth polymerization obey a second-order rate law, as the reaction rate depends on the collision between two functional groups from different molecules. The number-average degree of polymerization (DP) is related to the extent of reaction pp (fraction of functional groups that have reacted) by the Carothers equation: DP‾n=11−p\overline{\text{DP}}_n = \frac{1}{1 - p} Achieving high molecular weights requires very high conversions, typically p>0.98p > 0.98, because even small deviations from complete reaction limit chain length significantly. This equation, derived from stoichiometric considerations, underscores the need for efficient reaction conditions to minimize unreacted end groups. Step-growth processes are categorized into polycondensation, which eliminates small molecules like water (as in polyester synthesis from diols and diacids), and polyaddition, which links monomers without byproducts (as in polyurethane formation from diols and diisocyanates). Polycondensation often requires removal of byproducts to shift equilibrium toward high conversion, while polyaddition proceeds via nucleophilic addition to drive chain growth. Key challenges in include high sensitivity to monomer ; even a 1% imbalance in ratios can drastically reduce molecular weight, as predicted by extensions of the . Additionally, side reactions, such as or intramolecular cyclization, can compete with chain growth, leading to branched or cyclic impurities and limiting overall quality. Precise control of reaction conditions is thus essential for practical applications.

Classification

By Chemical Structure

Monomers are categorized by their chemical structure based on key functional groups and bonding sites that dictate their reactivity and suitability for specific pathways. This classification emphasizes molecular architecture, such as the presence of unsaturated bonds, carbonyl functionalities, or cyclic rings, which serve as reactive centers for forming polymer chains. Structural features not only determine the type of —addition, condensation, or ring-opening—but also influence the resulting 's backbone composition and properties. Vinyl or olefinic monomers are characterized by a carbon-carbon , commonly represented by the general \ceCH2=CHR\ce{CH2=CHR}, where R denotes a , , or aryl substituent. This enables addition during , allowing the monomer to propagate via radical, anionic, or cationic mechanisms without byproduct elimination. For instance, monomers like (\ceCH2=CH2\ce{CH2=CH2}) and styrene (\ceCH2=CHC6H5\ce{CH2=CHC6H5}) exemplify this class, leading to saturated backbones in polymers such as and . Carbonyl-based monomers incorporate a (\ceC=O\ce{C=O}), often in (\ce−COOR\ce{-COOR}) or (\ce−CONH−\ce{-CONH-}) functionalities, which facilitate nucleophilic attack and are primarily involved in step-growth condensation , releasing small molecules like or alcohol. These structures can combine with unsaturation, as seen in acrylic monomers with the formula \ceCH2=CHCOOR\ce{CH2=CHCOOR}, where the supports while the enables copolymerization or cross-linking. Representative examples include (\ceCH2=CHCOOCH3\ce{CH2=CHCOOCH3}) for polyacrylates, yielding polymers with polar backbones that enhance solubility and adhesion properties. Heterocyclic monomers feature strained ring systems containing heteroatoms, such as oxygen in epoxides (three-membered rings like \ce(CH2)2O\ce{(CH2)2O}) or lactones (cyclic esters like γ\gamma-butyrolactone), which undergo ring-opening polymerization to relieve ring strain and form linear chains. This process, often catalyzed by coordination or organometallic initiators, proceeds via nucleophilic or cationic attack on the ring, resulting in polyether or polyester backbones without double bonds. Epoxides like ethylene oxide produce flexible poly(ethylene oxide), while lactones such as ϵ\epsilon-caprolactone yield biodegradable polycaprolactone, highlighting the role of ring size in controlling propagation rates and polymer tacticity. The backbone structure of monomers—aliphatic versus aromatic—profoundly impacts flexibility and rigidity. Aliphatic backbones, composed of flexible carbon chains, result in polymers with lower temperatures and greater elasticity, as in polyolefins or polyesters from acyclic monomers. In contrast, aromatic backbones incorporating rigid phenyl or other aryl rings increase chain stiffness, elevating thermal stability (e.g., temperatures above 200°C in polyimides) and mechanical strength while reducing flexibility, as observed in aromatic polyamides like . This distinction arises from the delocalized π-electrons in aromatic systems, which enhance intermolecular interactions and resistance to deformation.

By Origin and Functionality

Monomers are classified by their origin into , synthetic, and semi-synthetic categories. Natural monomers are biogenic compounds produced through metabolic processes in living organisms, such as those derived from or animal sources, providing the building blocks for like proteins and . Synthetic monomers, in contrast, are artificially created, predominantly from feedstocks via industrial synthesis routes, enabling the production of a wide array of engineered polymers with tailored properties. Semi-synthetic or hybrid monomers arise from chemical modifications of natural precursors, combining biological origins with synthetic enhancements to improve functionality or stability in applications. Functionality refers to the number of reactive sites on a monomer molecule capable of forming chemical bonds during . Monofunctional monomers possess a single reactive site, typically resulting in chain termination or the formation of low-molecular-weight species rather than extended . Bifunctional monomers, with two reactive sites, primarily yield linear polymer chains through sequential linking. Polyfunctional monomers, featuring three or more reactive sites, facilitate branching or the creation of three-dimensional networks, significantly influencing the and material properties. According to Flory's theory of , the average functionality ff determines the potential for gelation; systems with f>2f > 2 can form infinite networks or gels at high conversion, while f≤2f \leq 2 limits structures to finite chains. Monomers are further distinguished as homomonomers or comonomers based on their use in . Homomonomers consist of a single monomer type, leading to homopolymers with uniform repeating units and consistent properties. Comonomers involve two or more distinct monomer types polymerized together, resulting in copolymers that exhibit combined or synergistic characteristics, such as enhanced flexibility or thermal resistance. In natural systems, monomer functionality has evolved to optimize polymer roles in biological contexts, with bifunctional units predominating for linear assemblies like fibrous proteins that provide tensile strength, while higher functionalities enable cross-linked structures for rigidity in extracellular matrices. This evolutionary underscores how reactive site counts have been selected for functional diversity, from soluble enzymes to insoluble structural components.

Natural Monomers

Amino Acids

serve as the fundamental monomers in the of proteins, the essential macromolecules that perform a wide array of structural and functional roles in living organisms. These small organic compounds are characterized by their ability to polymerize through specific linkages, enabling the formation of diverse polypeptide chains that fold into functional proteins. There are 20 standard incorporated into proteins by the , each contributing unique chemical properties that influence and activity. The general structure of an is α\alpha-amino , represented as \ceH2N−CH(R)−COOH\ce{H2N-CH(R)-COOH}, where the central α\alpha-carbon atom is bonded to an amino group (\ce−NH2\ce{-NH2}), a (\ce−COOH\ce{-COOH}), a , and a variable denoted as R. This R group, also known as the or residue, distinguishes each and determines its specific physicochemical characteristics; for instance, has R = H, making it the simplest with no beyond , while features R = \ceCH3\ce{CH3}, introducing a small hydrophobic methyl group. The diversity in R groups—ranging from nonpolar alkyl chains to polar or charged moieties—allows for the combinatorial complexity observed in proteins. Amino acids exhibit several key biochemical properties that underpin their role as monomers. At physiological , they exist predominantly in a zwitterionic form, where the carboxyl group is deprotonated (\ce−COO−\ce{-COO^-}) and the amino group is protonated (\ce−NH3+\ce{-NH3^+}), resulting in a net neutral charge but with internal ionic interactions that enhance in aqueous environments. With the exception of , all standard possess a chiral center at the α\alpha-carbon, existing as enantiomers; the L-form (based on the convention relative to L-glyceraldehyde) predominates in biological systems, ensuring stereospecific recognition during protein synthesis. The side chains profoundly affect properties such as hydrophobicity (e.g., leucine's nonpolar isobutyl group promotes burial in protein cores), charge (e.g., aspartic acid's negatively charged carboxylate influences ionic interactions), and reactivity (e.g., cysteine's group enables disulfide bond formation for structural stabilization). In terms of , are primarily derived from key metabolic intermediates through pathways involving reactions, where an amino group is transferred from glutamate or other donors to α\alpha-keto acids. Most organisms can synthesize 11 non-essential endogenously via these routes, drawing from , the , or precursors; examples include from pyruvate and glutamate from α\alpha-ketoglutarate. However, nine essential —such as , , , , , , , , and —cannot be produced by humans and must be obtained through dietary sources to prevent deficiencies affecting protein synthesis and overall . As monomers, demonstrate polymerization potential by linking through condensation reactions that form amide bonds, specifically peptide bonds between the carboxyl group of one residue and the amino group of another, releasing water and yielding linear chains known as or polypeptides when extended. This process is catalyzed by ribosomes , utilizing templates for precise sequencing. Detailed aspects of their assembly into functional proteins are explored in the context of formation.

Nucleotides

Nucleotides serve as the fundamental monomeric units of nucleic acids, essential for storing and transmitting genetic information in living organisms. Each nucleotide consists of three key components: a nitrogenous base, a five-carbon pentose sugar, and one to three phosphate groups attached to the sugar's 5' carbon. The nitrogenous bases are classified into purines, which have a double-ring structure (adenine and guanine), and pyrimidines, which have a single-ring structure (cytosine, thymine in DNA, or uracil in RNA). The sugar moiety is either β-D-ribose, featuring a hydroxyl group at the 2' position, or 2'-deoxyribose, lacking this hydroxyl. A representative example is adenosine monophosphate (AMP), which combines adenine (a purine base), ribose, and a single phosphate group, forming the basic building block for adenosine triphosphate (ATP) upon additional phosphorylation. Variations in nucleotide structure distinguish those incorporated into DNA from those in RNA, reflecting their distinct biological roles. Deoxyribonucleotides, used in DNA, contain 2'-deoxyribose and the bases adenine (A), guanine (G), cytosine (C), and thymine (T), enabling stable double-stranded helices. Ribonucleotides, the monomers of RNA, incorporate ribose and substitute uracil (U) for thymine, allowing for greater structural flexibility in single-stranded forms. Nucleotides exist in mono-, di-, and triphosphate forms (NMP, NDP, NTP); the triphosphates—ATP, GTP, CTP, UTP for RNA, and dATP, dGTP, dCTP, dTTP for DNA—provide the high-energy bonds necessary for polymerization, releasing pyrophosphate to drive the reaction forward. These structural differences ensure specificity in nucleic acid synthesis and function. The biosynthesis of nucleotides occurs primarily through de novo pathways for purines and pyrimidines, which assemble the components from simple precursors to meet cellular demands for growth and repair. Purine nucleotides are synthesized by constructing the purine ring stepwise directly on a 5-phosphoribosyl-1-pyrophosphate (PRPP) molecule via phosphoribosylation, starting with ribose-5-phosphate activation and incorporating atoms from glycine, aspartate, glutamine, CO₂, and formate over 10 enzymatic steps to yield inosine monophosphate (IMP), which branches to AMP and GMP. Pyrimidine biosynthesis first forms the pyrimidine ring from carbamoyl phosphate and aspartate to produce orotate, which then undergoes phosphoribosylation with PRPP to form orotidine monophosphate (OMP), decarboxylated to uridine monophosphate (UMP), the precursor to CMP and other pyrimidines. Salvage pathways recycle free bases or nucleosides via phosphoribosyltransferases, conserving energy. These pathways are tightly regulated to balance nucleotide pools. Nucleotides underpin by encoding genetic information through complementary base pairing, which dictates the fidelity of and RNA transcription. In the Watson-Crick model, pairs specifically with (A-T) via two hydrogen bonds or with uracil (A-U) in , while pairs with (G-C) via three hydrogen bonds, ensuring antiparallel strand alignment and sequence specificity. This pairing mechanism allows to unwind and serve as a template, preserving genetic continuity across generations. Disruptions in base pairing can lead to , highlighting its critical role in evolutionary stability. The chemical reactivity of nucleotides centers on the phosphate and base moieties, enabling polymerization and molecular recognition. The phosphate group at the 5' position reacts with the 3' hydroxyl of an adjacent sugar to form phosphodiester bonds, creating the covalent sugar-phosphate backbone of nucleic acids during chain elongation. Meanwhile, the planar nitrogenous bases facilitate non-covalent hydrogen bonding for strand complementarity, with purine-pyrimidine pairing optimizing geometric fit and stability in the double helix. These reactive sites allow nucleotides to link into DNA and RNA polymers while maintaining informational integrity through precise interactions.

Monosaccharides

Monosaccharides are the simplest carbohydrates, serving as fundamental building blocks or monomers for more complex carbohydrate polymers such as , which play essential roles in and in living organisms. These organic compounds typically follow the general Cn(H2O)nC_n(H_2O)_n, where nn ranges from 3 to 7, and they contain a (aldehyde or ) along with multiple hydroxyl groups. As natural monomers, monosaccharides like glucose are central to metabolic pathways, including , where they are broken down to generate energy. The structure of monosaccharides is classified based on the type of : aldoses possess an at the end of the carbon chain, while ketoses have a typically at carbon 2. For instance, glucose, a prevalent aldohexose, has the molecular formula C6H12O6C_6H_{12}O_6 and exists predominantly in its open-chain form as an , though it readily cyclizes to form ring structures. In solution, monosaccharides adopt cyclic forms, resulting in five-membered rings or six-membered rings, which introduce a new chiral center at the anomeric carbon (C1 in aldoses). This leads to the formation of anomers: the α-anomer, where the hydroxyl group at the anomeric carbon is trans to the CH₂OH group in the standard , and the β-anomer, where it is cis. Common monosaccharides include glucose, , and , all of which are hexoses with the formula C6H12O6C_6H_{12}O_6 but differing in their functional groups and . These sugars exhibit D and L configurations based on the orientation of the hydroxyl group on the chiral carbon farthest from the carbonyl (C5 in hexoses), with the D-series being predominant in nature; for example, D-glucose is the primary form involved in , the metabolic pathway that converts it to pyruvate for ATP production. , a ketohexose, and , an aldohexose epimer of glucose at C4, share similar structural features but contribute uniquely to disaccharides like and , respectively. Monosaccharides possess several key properties that underpin their biological and chemical roles. As reducing sugars, they can donate electrons to oxidizing agents like Benedict's or Fehling's solutions due to their free or groups in equilibrium with the open-chain form, enabling tests for their presence. They exhibit optical activity, rotating plane-polarized light because of their chiral centers; for example, D-glucose is dextrorotatory with a of +52.7°. occurs as the α and β anomers interconvert in , leading to a change in until equilibrium is reached, typically favoring the β-anomer for glucose (about 64%). Physically, monosaccharides are white, crystalline solids with high in water due to extensive hydrogen bonding from their hydroxyl groups, though sweetness varies—fructose is the sweetest, approximately 1.7 times sweeter than , while is less so. Biosynthesis of monosaccharides primarily occurs through photosynthetic processes in and gluconeogenesis in animals. In photosynthesis, the in chloroplast stroma fixes atmospheric CO₂ into glyceraldehyde-3-phosphate using ATP and NADPH from the light reactions, ultimately assembling two molecules of this into one glucose molecule. This pathway produces glucose as a key energy storage monomer, with six turns of the cycle yielding one hexose. In heterotrophic organisms, synthesizes glucose from non-carbohydrate precursors like lactate, , or , mainly in the liver and kidneys, bypassing irreversible steps of to maintain blood glucose levels during . This process requires six high-energy phosphate bonds per glucose produced and is regulated by hormones like .

Isoprene Units

Isoprene, with the molecular formula , is a branched unsaturated known chemically as 2-methyl-1,3-butadiene, featuring a conjugated system that imparts high reactivity for . This structure consists of a four-carbon chain with a attached to the second carbon and double bonds between carbons 1-2 and 3-4, enabling it to serve as the fundamental building block for a diverse class of natural polymers. In , units link in a head-to-tail manner, where the "head" (the CH₂= group at one end) connects to the "tail" (the =CH₂ group at the other end) of adjacent units, forming linear or cyclic structures without 1-1 or 4-4 linkages, as described by the isoprene rule established in early 20th-century . This linkage pattern ensures the modular assembly of larger molecules while preserving the diene's reactivity for enzymatic cyclization or chain extension. In , isoprene is biosynthesized primarily in chloroplasts through the 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway, which generates the precursor dimethylallyl diphosphate (DMAPP) from and pyruvate, rather than the cytosolic used for other isoprenoids. The isoprene synthase then converts DMAPP directly to , which is emitted as a , contributing to atmospheric biogenic emissions estimated at over 500 TgC per year. These units polymerize or condense to form , such as monoterpenes (C₁₀H₁₆, two units) like limonene found in essential oils and sesquiterpenes (C₁₅H₂₄, three units) involved in production. Isoprene's volatility, with a of 34°C, allows it to contribute to the characteristic scents of many , while its conjugated structure facilitates rapid reactions with , enhancing plant resilience. Isoprene units play a critical role in plant defense mechanisms by acting as antioxidants that quench under stress conditions like heat or exposure, thereby protecting photosynthetic machinery and priming hormonal responses against herbivores. In materials, poly-cis-1,4-isoprene, composed of thousands of head-to-tail linked units, forms the backbone of extracted from latex, providing elasticity and tensile strength due to its all-cis configuration. Similarly, in essential oils, exemplifies a cyclized derived from two units, offering properties and serving as a volatile repellent in plant-herbivore interactions. These examples highlight isoprene's dual functionality in ecological defense and applications.

Synthetic Monomers

Olefin-Based Monomers

Olefin-based monomers are synthetic hydrocarbons featuring at least one carbon-carbon , primarily derived from feedstocks, and serve as fundamental building blocks in addition polymerization reactions to produce a wide array of plastics and elastomers. These monomers, classified as alkenes or dienes, undergo , where the opens to form long chains without the release of byproducts. The most prominent examples include , , and 1,3-butadiene, each contributing to high-volume industrial polymers due to their reactivity and versatility. Ethylene, with the chemical structure CH₂=CH₂, is the simplest α-olefin and exists without stereoisomers. Propylene, or propene, has the structure CH₂=CHCH₃ and likewise lacks stereoisomers as a small asymmetric . In contrast, 1,3-butadiene possesses the structure CH₂=CH-CH=CH₂ and can adopt s-cis or s-trans conformations around the central , influencing its reactivity in . These structures enable facile addition reactions, with the double bonds serving as reactive sites for coordination. The primary production method for these monomers is , a process where saturated hydrocarbons from , , or other fractions are heated to 750–900°C in the presence of steam to break C-C bonds and yield unsaturated products. The resulting mixture is quenched and separated via to achieve high purity levels essential for . Polymer-grade typically exceeds 99.9% purity, with impurities like limited to under 5 ppm to prevent . Similarly, and are purified to >99.5% and >99%, respectively, ensuring consistent quality. All three are colorless gases at , highly flammable with autoignition temperatures around 450–490°C, and require careful handling due to their low flash points (e.g., -136°C for ). Global production underscores their industrial scale: ethylene output reached approximately 168 million metric tons in 2023, primarily from and cracking. production was approximately 117 million metric tons in 2022, rising to about 126 million metric tons in 2024, often as a of ethylene cracking or via propane dehydrogenation. output stood at approximately 14.6 million metric tons in 2024, mainly from byproducts. These monomers are also used in copolymers to tailor properties; for instance, (EVA) combines ethylene with to produce flexible materials for adhesives, films, and footwear, enhancing and impact resistance. The industrial significance of olefin-based monomers lies in their role as precursors to commodity polymers via addition polymerization, often catalyzed by Ziegler-Natta systems. polymerizes to (PE), the world's most produced plastic at approximately 113 million metric tons in 2023, used in packaging, pipes, and films for its toughness and chemical resistance. yields (PP), valued for its rigidity and heat resistance in automotive parts and textiles. Ziegler-Natta catalysts, developed by and in the 1950s and awarded the 1963 , employ titanium compounds on supports activated by organoaluminum cocatalysts to achieve stereoregular polymers like isotactic PP, enabling precise control over chain microstructure and enabling mass production of high-performance materials. contributes to synthetic rubbers like rubber (SBR) for tires, leveraging its functionality for cross-linking. Recent advances in synthetic monomers include efforts toward , such as the development of bio-based from and on-purpose production via dehydrogenation or methanol-to-olefins processes, aiming to reduce reliance on feedstocks and lower carbon emissions in line with global environmental goals as of 2025.

Heteroatom-Containing Monomers

Heteroatom-containing monomers are synthetic organic compounds that incorporate elements such as oxygen, , or , typically through functional groups like carboxylic acids, amides, nitriles, aldehydes, or esters. These features enable polymerization via , , or ring-opening mechanisms, yielding polymers with tailored properties such as improved polarity, hydrogen bonding, and in polar solvents, which are essential for applications in coatings, fibers, and biomedical materials. Unlike purely hydrocarbon-based monomers, the heteroatoms introduce moments and reactive sites that enhance intermolecular interactions in the resulting macromolecules, though they can also raise concerns regarding reactivity and during handling and processing. A key example is acrylic acid (\ceCH2=CHCOOH\ce{CH2=CHCOOH}), a vinyl monomer featuring a carboxylic acid group that imparts acidity and polarity. Industrially, it is produced via the two-step vapor-phase catalytic oxidation of propylene: the first stage converts propylene to acrolein over a bismuth molybdate catalyst at 300–400°C, followed by oxidation of acrolein to acrylic acid using a molybdenum-vanadium oxide catalyst at similar temperatures, achieving yields exceeding 90%. The carboxylic functionality enhances the water solubility and adhesion of poly(acrylic acid) and its esters, making them ideal for superabsorbent polymers in diapers and agricultural hydrogels, as well as for acrylic coatings in paints and adhesives that provide durability and weather resistance. However, acrylic acid's corrosiveness and tendency to polymerize exothermically necessitate stabilization with inhibitors like hydroquinone during storage. Acrylonitrile (\ceCH2=CHCN\ce{CH2=CHCN}), containing a group, exemplifies nitrogen-functionalized monomers and is synthesized through the Sohio process, involving ammoxidation of with and air in a fluidized-bed reactor over a phosphomolybdate catalyst at 400–500°C, with selectivities around 80–85%. The electron-withdrawing group increases the monomer's reactivity in and confers chemical resistance, flame retardancy, and rigidity to copolymers such as acrylonitrile-butadiene-styrene (ABS), widely used in automotive components, luggage, and electronic housings for their impact strength and processability. Caprolactam, a seven-membered cyclic (\ce(CH2)5NHC=O\ce{(CH2)5NHC=O}), is the primary monomer for production. Its industrial synthesis begins with the oxidation of to , followed by oximation with to form , and concludes with in concentrated at 100–130°C, yielding after neutralization and extraction, with overall processes achieving high purity through and . The group's ability to form extensive hydrogen bonds results in polyamides with exceptional tensile strength (up to 80 MPa) and abrasion resistance, enabling applications in textile fibers, carpets, and engineering plastics for and bearings. Formaldehyde (\ceHCHO\ce{HCHO}), the simplest monomer, is generated by of over a silver catalyst at 600–700°C or an iron catalyst at 300–400°C, producing aqueous solutions (formalin) with concentrations up to 50% and yields over 90%. Its high reactivity facilitates with or to form thermoset resins, but formaldehyde's volatility and classification as a by regulatory agencies necessitate emission controls in end-use products like particleboard adhesives and , where it provides strong bonding (shear strengths >2 MPa) at low cost. ε-Caprolactone, a six-membered cyclic (\ce(CH2)5CO2\ce{(CH2)5CO2}), represents oxygen-rich lactone monomers and is produced industrially by Baeyer-Villiger oxidation of with derived from and acetic acid, followed by distillation to isolate the monomer. , often catalyzed by stannous octoate at 100–180°C, yields , a semicrystalline with a low temperature (-60°C) and tunable biodegradability (half-life 2–4 years in soil), prized for biomedical uses including suture materials, drug-eluting stents, and scaffolds due to its and elasticity. The linkages enable hydrolytic degradation without acidic byproducts, contrasting with non-degradable polymers.

Monomers in Biopolymers

In Proteins and Peptides

In proteins and peptides, serve as the fundamental monomeric units that polymerize to form linear chains known as polypeptides, which fold into functional three-dimensional structures. The primary assembly mechanism is ribosome-mediated , where (mRNA) directs the sequential addition of to a growing polypeptide chain through the formation of bonds. During this process, (tRNA) molecules deliver specific to the 's peptidyl transferase center, where the catalyzes the nucleophilic attack of the amino group of the incoming on the carbonyl carbon of the peptidyl-tRNA in the P-site, resulting in bond formation without external cofactors. This reaction proceeds at a rate of approximately 2-8 bonds per second in eukaryotes, establishing the primary structure as the unique linear sequence of covalently linked by bonds. The primary structure dictates higher-order folding, with secondary structures such as α-helices and β-sheets arising from hydrogen bonding between the carbonyl oxygen and hydrogen atoms in the polypeptide backbone, typically every fourth residue in helices or between adjacent strands in sheets. These local conformations provide mechanical stability and are crucial for the overall architecture of the protein. is inherently mRNA-directed, ensuring fidelity through codon-anticodon base pairing, but many proteins undergo post-translational modifications (PTMs) such as , , or , which occur after chain completion and modulate stability, localization, activity, or interactions with other molecules. In contrast, certain , like antibiotics such as , are assembled via non-ribosomal peptide synthetases (NRPS), large modular enzymes that catalyze bond formation independently of ribosomes, incorporating and enabling diverse cyclization or modification patterns. Proteins exhibit a wide array of functions rooted in their polymeric assembly, with typical lengths ranging from 50 to over 1,000 residues, allowing for complex structures like human (527 residues) or the subunits of human (141–147 residues each). Structural proteins such as , a triple-helical trimer of three polypeptide chains each about 1,000 residues long, provide tensile strength and scaffold support in extracellular matrices like and . Enzymatic proteins, exemplified by , catalyze the of to and oxygen, protecting cells from oxidative damage at rates up to 10^6 molecules per second per molecule. Transport proteins like , a tetrameric assembly of four 141-146 residue chains each bearing a group, reversibly bind oxygen in the lungs and release it in tissues, with enhancing efficiency via allosteric conformational shifts. Denaturation, induced by heat, pH extremes, or chaotropes like , disrupts these non-covalent interactions, unfolding the protein and often leading to irreversible aggregation or loss of function, as seen in the coagulation of egg whites upon cooking.

In Nucleic Acids and Polysaccharides

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are biopolymers synthesized from nucleotide monomers through the formation of phosphodiester bonds between the 3'-hydroxyl group of one nucleotide and the 5'-phosphate group of another. These bonds are catalyzed by DNA polymerases during DNA replication, which copies the genetic information for cell division, and by RNA polymerases during transcription, which produces messenger RNA (mRNA) from DNA templates. The iconic double helix structure of DNA, first described by Watson and Crick, derives its stability primarily from hydrogen bonding between complementary base pairs (adenine-thymine and guanine-cytosine) and hydrophobic stacking interactions between adjacent bases along the helix axis. This structural integrity is essential for preserving genetic information across generations, with DNA serving as the primary molecule for heredity in most organisms. In contrast, RNA plays key roles in gene expression, acting as an intermediary for protein synthesis through mRNA and performing catalytic or regulatory functions in other forms like transfer RNA (tRNA) and ribosomal RNA (rRNA). Enzymatic processes in nucleic acid synthesis exhibit high specificity to maintain fidelity. DNA polymerases incorporate proofreading mechanisms, such as 3'→5' activity, which removes mismatched immediately after incorporation, reducing error rates in replication to approximately 1 in 10^7 base pairs. This error-correction step is crucial during the process, where each DNA strand serves as a template, ensuring accurate transmission of hereditary . Transcription by RNA polymerases, while less stringent due to the transient nature of RNA, involves initiation at promoter sites, elongation along the template strand, and termination signals, allowing precise control of . Polysaccharides, formed from monomers such as glucose, are assembled via glycosidic linkages catalyzed by glycosyltransferases, which transfer activated sugar units from donors like UDP-glucose to growing chains. In , a primary energy storage polysaccharide in , glucose units are linked predominantly by α-1,4 glycosidic bonds in linear chains and α-1,6 bonds at branch points in , enabling compact storage and rapid mobilization. , the analogous storage form in animals, features even more frequent branching via α-1,6 linkages every 8-12 residues, facilitated by and branching enzymes, which enhances and for quick energy release. , conversely, consists of linear β-1,4 glycosidic linkages between glucose units, creating rigid, insoluble fibrils that provide in plant cell walls through extensive hydrogen bonding between chains. The biological roles of these underscore their functional diversity: and serve as osmotically inactive reservoirs of glucose for energy metabolism, while imparts mechanical strength and tensile properties essential for growth and . Enzymatic degradation, such as the of by α-amylases, cleaves internal α-1,4 bonds to produce and dextrins, initiating breakdown in and facilitating absorption. These processes highlight the precision of glycosyltransferases in building hydrophilic tailored for storage and structural applications in .

In Terpenoids and Rubbers

Terpenoids and rubbers are biosynthesized from the universal C5 units, isopentenyl diphosphate (IPP) and its dimethylallyl diphosphate (DMAPP), which serve as building blocks in head-to-tail condensations catalyzed by stereospecific prenyltransferases. These s facilitate the sequential addition of IPP to allylic diphosphates like DMAPP, forming longer prenyl chains with either trans or cis configurations depending on the enzyme class; trans-prenyltransferases produce E-configured products such as farnesyl diphosphate (FPP, C15), while cis-prenyltransferases yield Z-configured chains essential for elastic polymers. In , this process occurs via the mevalonate (MVA) pathway in the or the methylerythritol phosphate (MEP) pathway in plastids, with prenyltransferases ensuring chain elongation up to thousands of units for high-molecular-weight . Natural rubber, a prominent example of cis-polyisoprene, is assembled in the latex of through the action of cis-prenyls, including rubber (an allyl diphosphate-dependent complex), which initiates with a farnesyl diphosphate starter and extends the chain via repeated head-to-tail cis-1,4 additions of IPP, resulting in high-molecular-weight cis-1,4-polyisoprene (typically >10,000 units, molecular weight exceeding 1 million Da). In contrast, trans-1,4-polyisoprenes like , found in species such as Palaquium gutta and , are synthesized by trans-prenyltransferases that favor trans configurations, producing rigid, high-molecular-weight chains (up to 3000 units) with a dimethylallyl initiator and internal trans linkages. structures extend beyond linear polyisoprenes; for instance, are C40 tetraterpenoids formed by head-to-head condensation of two geranylgeranyl diphosphates (GGPP, C20), while steroids arise from the cyclization of the linear squalene (C30, derived from FPP dimerization) into a tetracyclic scaffold via squalene cyclase enzymes, yielding precursors like or cycloartenol. These fulfill critical ecological roles in , with cis-polyisoprenes in acting as elastomers that seal wounds and deter herbivores through rapid and , enhancing survival against physical damage and predation. , as pigments and antioxidants, integrate into photosynthetic membranes to harvest light energy (absorbing in the 400-500 nm range) and quench , thereby protecting chloroplasts from photooxidative stress during high-light conditions and supporting efficient . Steroids and other cyclized terpenoids contribute to structural integrity and signaling, while the overall diversity of terpenoids aids in defense, attraction via volatiles, and to environmental stresses, underscoring their evolutionary importance in resilience.

References

  1. http://web.mit.edu/5.33/www/lec/poly.pdf
  2. https://www.sciencedirect.com/topics/chemistry/monomer
  3. https://www2.chemistry.msu.edu/faculty/reusch/virttxtjml/polymers.htm
  4. https://pmc.ncbi.nlm.nih.gov/articles/PMC5524987/
  5. https://opened.cuny.edu/courseware/lesson/612/student/?section=2
  6. https://par.nsf.gov/servlets/purl/10173089
  7. https://www.britannica.com/science/monomer
  8. https://www.sciencedirect.com/topics/neuroscience/monomer
  9. https://www.etymonline.com/word/monomer
  10. https://www.oed.com/dictionary/monomer_n?tl=true
  11. https://www.acs.org/education/whatischemistry/landmarks/staudingerpolymerscience.html
  12. https://www.sciencehistory.org/education/scientific-biographies/hermann-staudinger/
  13. https://www.nobelprize.org/prizes/chemistry/1953/staudinger/facts/
  14. https://www.sciencedirect.com/topics/engineering/monomer-molecule
  15. https://pubs.acs.org/doi/10.1021/jacs.3c00589
  16. https://pubs.rsc.org/en/content/articlehtml/2023/py/d3py00535f
  17. https://www.sciencedirect.com/topics/engineering/homopolymerization
  18. https://www.sciencedirect.com/topics/engineering/polymerization
  19. https://application.wiley-vch.de/books/sample/352734442X_c01.pdf
  20. https://books.google.com/books/about/Principles_of_Polymer_Chemistry.html?id=CQ0EbEkT5R0C
  21. https://pubs.acs.org/doi/10.1021/ja01515a020
  22. https://www.nature.com/articles/pj201618
  23. https://www.sciencedirect.com/topics/engineering/step-growth-polymerization
  24. https://pubs.acs.org/doi/10.1021/ed058p862
  25. https://www.sciencedirect.com/topics/materials-science/step-growth-polymerization
  26. https://www.sciencedirect.com/topics/chemistry/vinyl-polymer
  27. https://pubs.rsc.org/en/content/articlelanding/2022/py/d2py00850e
  28. https://www.sciencedirect.com/science/article/abs/pii/S0079670007000056
  29. https://pubs.acs.org/doi/10.1021/ma00213a009
  30. https://www.sciencedirect.com/topics/chemical-engineering/aromatic-polymer
  31. https://pubs.acs.org/doi/10.1021/acsami.5c13712
  32. https://spj.science.org/doi/10.1186/s40824-021-00208-8
  33. https://pmc.ncbi.nlm.nih.gov/articles/PMC11055061/
  34. https://www.mdpi.com/2073-4360/13/7/1105
  35. https://www.sciencedirect.com/topics/engineering/bifunctional-monomer
  36. https://pubs.rsc.org/en/content/articlehtml/2023/py/d3py00912b
  37. https://chem.libretexts.org/Bookshelves/General_Chemistry/Map%253A_General_Chemistry_%28Petrucci_et_al.%29/27%253A_Reactions_of_Organic_Compounds/27.08%253A_Polymers_and_Polymerization_Reactions
  38. https://www.xometry.com/resources/materials/copolymer-vs-homopolymers/
  39. https://pubs.acs.org/doi/10.1021/acs.accounts.4c00546
  40. https://onlinelibrary.wiley.com/doi/full/10.1002/pol.20210506
  41. https://www.ncbi.nlm.nih.gov/books/NBK557845/
  42. https://biology.arizona.edu/biochemistry/problem_sets/aa/aa.html
  43. https://chemed.chem.purdue.edu/genchem/topicreview/bp/1biochem/amino2.html
  44. http://faculty.otterbein.edu/DJohnston/chem220/tutorial3/amino.html
  45. https://www.ncbi.nlm.nih.gov/books/NBK559250/
  46. https://chemed.chem.purdue.edu/genchem/topicreview/bp/1biochem/proteins4.html
  47. https://chem.libretexts.org/Bookshelves/Organic_Chemistry/Map%253A_Organic_Chemistry_%28Wade%29_Complete_and_Semesters_I_and_II/Map%253A_Organic_Chemistry_%28Wade%29/27%253A_Nucleic_Acids/27.01%253A_Nucleotides_and_Nucleic_Acids
  48. https://pmc.ncbi.nlm.nih.gov/articles/PMC6822018/
  49. https://www.genome.gov/genetics-glossary/Nucleotide
  50. https://www.abcam.com/en-us/knowledge-center/dna-and-rna/nucleosides-and-nucleotides-building-blocks-of-genetic-material
  51. https://pmc.ncbi.nlm.nih.gov/articles/PMC3243375/
  52. https://pmc.ncbi.nlm.nih.gov/articles/PMC8247561/
  53. https://www.nature.com/articles/171737a0
  54. https://chem.libretexts.org/Bookshelves/Organic_Chemistry/Organic_Chemistry_%28Morsch_et_al.%29/28%253A_Biomolecules_-_Nucleic_Acids/28.02%253A_Base_Pairing_in_DNA_-_The_Watson-Crick_Model
  55. https://www2.chemistry.msu.edu/faculty/reusch/virttxtjml/nucacids.htm
  56. https://www2.chemistry.msu.edu/faculty/reusch/virttxtjml/carbhyd.htm
  57. https://web.pdx.edu/~wamserc/C336S02/25notes.htm
  58. https://books.byui.edu/bio_264_anatomy_phy_I/311
  59. https://cdn.wou.edu/chemistry/files/2020/03/Carbohydrates-Part-1-Monosaccharide-Structure.pdf
  60. http://guweb2.gonzaga.edu/faculty/cronk/CHEM245pub/carbohydrates.html
  61. https://guides.hostos.cuny.edu/che120/chapter6
  62. https://wou.edu/chemistry/chapter-11-introduction-major-macromolecules/
  63. https://bioprinciples.biosci.gatech.edu/09-carbon-fixation/
  64. https://biology.arizona.edu/biochemistry/problem_sets/photosynthesis_2/02t.html
  65. https://www.bu.edu/aldolase/biochemistry2/29_Gluconeogenesis.pdf
  66. https://uh.edu/dtu/02-Gluconeogenesis-07.htm
  67. https://pubchem.ncbi.nlm.nih.gov/compound/Isoprene
  68. https://academic.oup.com/mbe/article/35/9/2185/5037827
  69. https://pmc.ncbi.nlm.nih.gov/articles/PMC6640788/
  70. https://pubs.acs.org/doi/10.1021/acsomega.6b00025
  71. https://www.science.org/doi/10.1126/sciadv.adu4637
  72. https://www.sciencedirect.com/topics/chemical-engineering/polyisoprenes
  73. https://www.sciencedirect.com/topics/chemistry/limonene
  74. https://www.chemanalyst.com/industry-report/ethylene-market-638
  75. https://www.reportsanddata.com/report-detail/propylene-market
  76. https://www.reportsanddata.com/report-detail/butadiene-market
  77. https://www.towardschemandmaterials.com/insights/polyethylene-market
  78. https://www.iea.org/reports/the-future-of-petrochemicals
  79. https://bionumbers.hms.harvard.edu/bionumber.aspx?s=n&v=1&id=107783
  80. https://pmc.ncbi.nlm.nih.gov/articles/PMC4972197/
  81. https://www.ncbi.nlm.nih.gov/books/NBK26830/
  82. https://www.nature.com/articles/s41467-023-35795-8
  83. https://pubs.acs.org/doi/10.1021/cr0301191
  84. https://www.uniprot.org/uniprotkb/P04040/entry
  85. https://www.uniprot.org/uniprotkb/P69905/entry
  86. https://www.uniprot.org/uniprotkb/P68871/entry
  87. https://www.nature.com/articles/s41467-024-54046-y
  88. https://www.ncbi.nlm.nih.gov/books/NBK538336/
  89. https://pmc.ncbi.nlm.nih.gov/articles/PMC9610776/
  90. https://www.ncbi.nlm.nih.gov/books/NBK26887/
  91. https://pmc.ncbi.nlm.nih.gov/articles/PMC1360284/
  92. https://www.ncbi.nlm.nih.gov/books/NBK9879/
  93. https://pmc.ncbi.nlm.nih.gov/articles/PMC6153641/
  94. https://www.ncbi.nlm.nih.gov/books/NBK26850/
  95. https://pmc.ncbi.nlm.nih.gov/articles/PMC7933479/
  96. https://pmc.ncbi.nlm.nih.gov/articles/PMC7407607/
  97. https://pmc.ncbi.nlm.nih.gov/articles/PMC7239500/
  98. https://pubmed.ncbi.nlm.nih.gov/34115468/
  99. https://www.ncbi.nlm.nih.gov/books/NBK9871/
  100. https://pmc.ncbi.nlm.nih.gov/articles/PMC9104245/
  101. https://doi.org/10.1002/iub.2418
  102. https://doi.org/10.1016/j.biochi.2008.06.008
  103. https://doi.org/10.3390/ijms241411561
Add your contribution
Related Hubs
User Avatar
No comments yet.