Wallpaper
View on WikipediaThis article needs additional citations for verification. (October 2011) |
Wallpaper is used in interior decoration to cover the interior walls of domestic and public buildings. It is usually sold in rolls and is applied onto a wall using wallpaper paste. Wallpapers can come plain as "lining paper" to help cover uneven surfaces and minor wall defects, "textured", plain with a regular repeating pattern design, or with a single non-repeating large design carried over a set of sheets.
The smallest wallpaper rectangle that can be tiled to form the whole pattern is known as the pattern repeat. Wallpaper printing techniques include surface printing, rotogravure, screen-printing, rotary printing press, and digital printing.
Modern wallpaper
[edit]Modern wallpaper is made in long rolls which are hung vertically on a wall. Patterned wallpapers are designed so that the pattern repeats, and thus pieces cut from the same roll can be hung next to each other so as to continue the pattern without it being easy to see where the join between two pieces occurs. In the case of large complex patterns of images this is normally achieved by starting the second piece halfway into the length of the repeat, so that if the pattern going down the roll repeats after 24 inches (610 mm), the next piece sideways is cut from the roll to begin 12 inches (300 mm) down the pattern from the first. The number of times the pattern repeats horizontally across a roll does not matter for this purpose. A single pattern can be issued in several different colorways.
History
[edit]
The main historical techniques are hand-painting, woodblock printing (overall the most common), stencilling, and various types of machine printing. The first three all date back to before 1700.[1]
Wallpaper, using the printmaking technique of woodcut, gained popularity in Renaissance Europe amongst the emerging gentry. The social elite continued to hang large tapestries on the walls of their homes, as they had in the Middle Ages. These tapestries added color to the room as well as providing an insulating layer between the stone walls and the room, thus retaining heat in the room. However, tapestries were extremely expensive and so only the very rich could afford them. Less well-off members of the elite, unable to buy tapestries due either to prices or wars preventing international trade, turned to wallpaper to brighten up their rooms.
Early wallpaper featured scenes similar to those depicted on tapestries, and large sheets of the paper were sometimes hung loosely on the walls, in the style of tapestries, and sometimes pasted as today. Prints were very often pasted to walls, instead of being framed and hung, and the largest sizes of prints, which came in several sheets, were probably mainly intended to be pasted to walls. Some important artists made such pieces – notably Albrecht Dürer, who worked on both large picture prints and also ornament prints – intended for wall-hanging. The largest picture print was The Triumphal Arch commissioned by the Holy Roman Emperor Maximilian I and completed in 1515. This measured a colossal 3.57 by 2.95 metres (11.7 by 9.7 ft), made up of 192 sheets, and was printed in a first edition of 700 copies, intended to be hung in palaces and, in particular, town halls, after hand-coloring.
Very few samples of the earliest repeating pattern wallpapers survive, but there are a large number of old master prints, often in engraving of repeating or repeatable decorative patterns. These are called ornament prints and were intended as models for wallpaper makers, among other uses.
England and France were leaders in European wallpaper manufacturing. Among the earliest known samples is one found on a wall from England and is printed on the back of a London proclamation of 1509. It became very popular in England following Henry VIII's excommunication from the Catholic Church – English aristocrats had always imported tapestries from Flanders and Arras, but Henry VIII's split with the Catholic Church had resulted in a fall in trade with Europe. Without any tapestry manufacturers in England, English gentry and aristocracy alike turned to wallpaper.
During the Protectorate under Oliver Cromwell, the manufacture of wallpaper, seen as a frivolous item by the Puritan government, was halted. Following the Restoration of Charles II, wealthy people across England began demanding wallpaper again – Cromwell's Puritan regime had imposed a repressive and restrictive culture on the population, and following his death, wealthy people began purchasing comfortable domestic items which had been banned under the Puritan state.
18th century
[edit]In 1712, during the reign of Queen Anne, a wallpaper tax was introduced which was not abolished until 1836. By the mid-18th century, Britain was the leading wallpaper manufacturer in Europe, exporting vast quantities to Europe in addition to selling on the middle-class British market. However this trade was seriously disrupted in 1755 by the Seven Years' War and later the Napoleonic Wars, and by a heavy level of duty on imports to France.
In 1748 the British Ambassador to Paris decorated his salon with blue flock wallpaper, which then became very fashionable there. In the 1760s the French manufacturer Jean-Baptiste Réveillon hired designers working in silk and tapestry to produce some of the most subtle and luxurious wallpaper ever made. His sky blue wallpaper with fleurs-de-lys was used in 1783 on the first balloons by the Montgolfier brothers.[1] The landscape painter Jean-Baptiste Pillement discovered in 1763 a method to use fast colours.
Hand-blocked wallpapers like these use hand-carved blocks and by the 18th century designs include panoramic views of antique architecture, exotic landscapes and pastoral subjects, as well as repeating patterns of stylized flowers, people and animals.
In 1785 Christophe-Philippe Oberkampf had invented the first machine for printing coloured tints on sheets of wallpaper. In 1799 Louis-Nicolas Robert patented a machine to produce continuous lengths of paper, the forerunner of the Fourdrinier machine. This ability to produce continuous lengths of wallpaper now offered the prospect of novel designs and nice tints being widely displayed in drawing rooms across Europe.
Wallpaper manufacturers active in England in the 18th century included John Baptist Jackson[1] and John Sherringham.[2] Among the firms established in 18th-century America: J. F. Bumstead & Co. (Boston), William Poyntell (Philadelphia), John Rugar (New York).[1]
High-quality wallpaper made in China became available from the later part of the 17th century; this was entirely handpainted and very expensive. It can still be seen in rooms in palaces and grand houses including Nymphenburg Palace, Łazienki Palace, Chatsworth House, Temple Newsam, Broughton Castle, Lissan House, and Erddig. It was made up to 1.2 metres (3 ft 11 in) wide. English, French and German manufacturers imitated it, usually beginning with a printed outline which was coloured in by hand, a technique sometimes also used in later Chinese papers.
France and America
[edit]Towards the end of the 18th century the fashion for scenic wallpaper revived in both America and France, leading to some enormous panoramas, like the 1804 20 strip wide panorama, Sauvages de la Mer du Pacifique (Savages of the Pacific), designed by the artist Jean-Gabriel Charvet for the French manufacturer Joseph Dufour et Cie showing the Voyages of Captain Cook.[3] This famous so-called "papier peint" wallpaper is still in situ in Ham House, Peabody, Massachusetts.[4] It was the largest panoramic wallpaper of its time, and marked the burgeoning of a French industry in panoramic wallpapers. Dufour realized almost immediate success from the sale of these papers and enjoyed a lively trade with America. The Neoclassical style currently in favour worked well in houses of the Federal period with Charvet's elegant designs. Like most 18th-century wallpapers, the panorama was designed to be hung above a dado.
Beside Joseph Dufour et Cie (1797 – c. 1830) other French manufacturers of panoramic scenic and trompe-l'œil wallpapers, Zuber et Cie (1797–present) and Arthur et Robert exported their product across Europe and North America. Zuber et Cie's c. 1834 design Views of North America[5] hangs in the Diplomatic Reception Room of the White House.
Among the firms begun in France in the 19th century: Desfossé & Karth.[1] In the United States: John Bellrose, Blanchard & Curry, Howell Brothers, Longstreth & Sons, Isaac Pugh in Philadelphia; Bigelow, Hayden & Co. in Massachusetts; Christy & Constant, A. Harwood, R. Prince in New York.[6]
The earliest known American wallpaper sample book that has survived to present day resides in the collection of Old Sturbridge Village in Sturbridge, Massachusetts. It was produced by the firm Janes & Bolles of Hartford, Connecticut, between 1821 and 1828.[7]
England
[edit]
During the Napoleonic Wars, trade between Europe and Britain evaporated, resulting in the gradual decline of the wallpaper industry in Britain. However, the end of the war saw a massive demand in Europe for British goods which had been inaccessible during the wars, including cheap, colourful wallpaper. The development of steam-powered printing presses in Britain in 1813 allowed manufacturers to mass-produce wallpaper, reducing its price and so making it affordable to working-class people. Wallpaper enjoyed a huge boom in popularity in the nineteenth century, seen as a cheap and very effective way of brightening up cramped and dark rooms in working-class areas. It became almost the norm in most areas of middle-class homes, but remained relatively little used in public buildings and offices, with patterns generally being avoided in such locations. In the latter half of the century Lincrusta and Anaglypta, not strictly wallpapers, became popular competitors, especially below a dado rail. They could be painted and washed, and were a good deal tougher, though also more expensive.
Wallpaper manufacturing firms established in England in the 19th century included Jeffrey & Co.; Shand Kydd Ltd.;[1] Lightbown, Aspinall & Co.;[1] John Line & Sons;[1] Potter & Co.;[8] Arthur Sanderson & Sons; Townshend & Parker.[9] Designers included Owen Jones, William Morris, and Charles Voysey. In particular, many 19th century designs by Morris & Co and other Arts and Crafts Movement designers remain in production.
20th century
[edit]
By the early 20th century wallpaper had established itself as one of the most popular household items across the Western world. Manufacturers in the USA included Sears;[10] designers included Andy Warhol.[11] Wallpaper has gone in and out of fashion since about 1930, but the overall trend has been for wallpaper-type patterned wallcoverings to lose ground to plain painted walls.
21st century
[edit]In the early 21st century wallpaper evolved into a lighting feature, enhancing the mood and the ambience through lights and crystals. Meystyle, a London-based company, invented LED-incorporated wallpaper.[12] The development of digital printing allows designers to break the mould and combine new technology and art to bring wallpaper to a new level of popularity.[13]
Historical collections
[edit]Historical examples of wallpaper are preserved by cultural institutions such as the Deutsches Tapetenmuseum (Kassel) in Germany;[14] the Musée des Arts Décoratifs (Paris) and Musée du Papier Peint (Rixheim) in France;[1] the Victoria and Albert Museum (V&A) in the UK;[15] the Smithsonian's Cooper-Hewitt,[16] Historic New England,[17] Metropolitan Museum of Art,[18] U.S. National Park Service,[19][20] and Winterthur[21] in the US. Original designs by William Morris and other English wallpaper companies are held by Walker Greenbank.
Types and sizes
[edit]
In terms of methods of creation, wallpaper types include painted wallpaper, hand-printed blockwood wallpaper, hand-printed stencil wallpaper, machine-printed wallpaper, and flock wallpaper.[1]
Modern wallcoverings are diverse, and what is described as wallpaper may no longer actually be made from paper. Two of the most common factory trimmed sizes of wallpaper are referred to as "American" and "European" rolled goods. American rolled goods are 27 inches (69 cm) by 27 feet (8.2 m) in length. European rolled goods are 52 centimetres (20 in) wide by 10 metres (33 ft) in length,[22] approximately 5.2 square metres (56 sq ft). Most wallpaper borders are sold by length and with a wide range of widths therefore surface area is not applicable, although some may require trimming.
The most common wall covering for residential use and generally the most economical is prepasted vinyl coated paper, commonly called "strippable" which can be misleading. Cloth backed vinyl is fairly common and durable. Lighter vinyls are easier to handle and hang. Paper backed vinyls are generally more expensive, significantly more difficult to hang, and can be found in wider untrimmed widths. Foil wallpaper generally has paper backing and can (exceptionally) be up to 36 inches (91 cm) wide, and be very difficult to handle and hang. Textile wallpapers include silks, linens, grass cloths, strings, rattan, and actual impressed leaves. There are acoustical wall carpets to reduce sound. Customized wallcoverings are available at high prices and most often have minimum roll orders.
Solid vinyl with a cloth backing is the most common commercial wallcovering [citation needed] and comes from the factory as untrimmed at 54 inches (140 cm) approximately, to be overlapped and double cut by the installer. This same type can be pre-trimmed at the factory to 27 inches (69 cm) approximately.
Modern developments
[edit]Custom printing
[edit]New digital inkjet printing technologies using ultraviolet (UV) cured inks are being used for custom wallpaper production. Very small runs can be made, even a single wall. Photographs or digital art are output onto blank wallpaper material. Typical installations are corporate lobbies, restaurants, athletic facilities, and home interiors. This gives a designer the ability to give a space the exact look and feel desired.
High-tech
[edit]New types of wallpaper under development or entering the market in the early 21st century include wallpaper that blocks certain mobile phone and WiFi signals, in the interest of privacy. The wallpaper is coated with a silver ink which forms crystals that block outgoing signals.[23]
Seismic
[edit]In 2012 scientists at the Institute of Solid Construction and Construction Material Technology at the Karlsruhe Institute of Technology announced that they had developed a wallpaper that can help keep a masonry wall from failing in an earthquake. The wallpaper uses glass fibre reinforcement in several directions and a special adhesive which forms a strong bond with the masonry when dry.[24]
As a means of artistic expression
[edit]Tsang Kin-Wah, one of Hong Kong's best-known painters,[25] creates large-scale wallpaper installations that evoke the floral designs of William Morris in a style that has become known as word-art installation.[26]
Installation
[edit]Like paint, wallpaper requires proper surface preparation before application. Additionally wallpaper is not suitable for all areas. For example, bathroom wallpaper may deteriorate rapidly due to excessive steam (if is not sealed with a specific varnish). Proper preparation includes the repair of any defects in the drywall or plaster and the removal of loose material or old adhesives. For a better finish with thinner papers and poorer quality walls the wall can be cross-lined (horizontally) with lining paper first. Accurate room measurements (length, width, and height) along with number of window and door openings is essential for ordering wallpaper. Large drops, or repeats, in a pattern can be cut and hung more economically by working from alternating rolls of paper.[27]
After pre-pasted wallpaper is moistened, or dry wallpaper is coated with wet paste, the wet surface is folded onto itself and left for a few minutes to activate the glue, which is called "booking wallpaper."[28]
Besides conventional installation on interior walls and ceilings, wallpapers have been deployed as decorative covering for hatboxes, bandboxes, books, shelves, and window-shades.[29]
Wallpaper adhesives
[edit]Most wallpaper adhesives are starch or methylcellulose based.
See also
[edit]References
[edit]- ^ a b c d e f g h i j Grove Art Online "Wallpaper", Oxford Art Online
- ^ Bulletin of the City Art Museum of St. Louis, Vol. 15, No. 2, 1930
- ^ Joseph Dufour (1804), Les sauvages de la mer Pacifique, tableau pour décoration en papier peint, A Macon [France?]: De l'Imprimerie de Moiroux, rue franche, ISBN 0665141149, OL 23705116M, 0665141149
{{citation}}: ISBN / Date incompatibility (help) - ^ Horace H. F. Jayne. Captain Cook Wallpaper. Bulletin of the Pennsylvania Museum, Vol. 17, No. 69 (Oct., 1921)
- ^ R. P. Emlen: ‘Imagining America in 1834: Zuber's Scenic Wallpaper "Vues d'Amérique du Nord"’, Winterthur Port., xxxii (Summer–Aug 1997)
- ^ Decorator and Furnisher, Vol. 16, No. 6 (Sep., 1890)
- ^ "The Rosetta Stone of Wallpaper?". www.cooperhewitt.org. Cooper Hewitt, Smithsonian Design Museum. 2014-09-22. Retrieved 2021-07-20.
- ^ Sugden, A.V, Potters of Darwen 1839–1939 a century of wallpaper printing by machinery. 1939
- ^ Official descriptive and illustrated catalogue, Great exhibition of the works of industry of all nations, London: Spicer Brothers, 1851, OCLC 1044640, OL 6962338M
- ^ Wall paper, Chicago [Ill.]: Sears, Roebuck and Co., 1900, OCLC 17573461, OL 25126572M
- ^ Hapgood. Wallpaper and the artist: from Durer to Warhol. London: Abbeville Press, 1992
- ^ Surya, Shirley (2008). "Patterns: Design, Architecture, Interiors", page 204. DOM Publishers, Singapore. ISBN 978-3938666715
- ^ Swengley, N. [1], London, 20 March 2010. Retrieved on 30 June 2015
- ^ E. W. Mick. Hauptwerke des Deutschen Tapetenmuseum in Kassel (Tokyo, 1981)
- ^ "Wallpaper". London: V&A.
- ^ "Cooper-Hewitt". USA.[permanent dead link]
- ^ "Wallpaper Search Collection". USA: Wallpaper Historic New England. Retrieved 21 December 2023.
- ^ "Metropolitan Museum of Art". NY.
- ^ Patricia Hamm and James Hamm. The Removal and Conservation Treatment of a Scenic Wallpaper, "Paysage à Chasses," from the Martin Van Buren National Historic Site. Journal of the American Institute for Conservation, Vol. 20, No. 2, Conservation of Historic Wallpaper (Spring, 1981)
- ^ Thomas K. McClintock. The In situ Treatment of the Wallpaper in the Study of the Longfellow National Historic Site. Journal of the American Institute for Conservation, Vol. 20, No. 2, Conservation of Historic Wallpaper (Spring, 1981)
- ^ Horace L. Hotchkiss, Jr. Wallpaper from the Shop of William Poyntell. Winterthur Portfolio, Vol. 4 (1968)
- ^ "Paint & Wallpaper: How to decorate your home". www.johnlewis.com.
- ^ Peter Leggatt and Nathan Brooker (February 22, 2013). "The new role of wallpaper". Financial Times. Archived from the original on December 10, 2022. Retrieved March 3, 2013.
- ^ "High-tech wallpaper resists earthquakes". UPI. April 4, 2012. Retrieved March 3, 2013.
- ^ J.P. (May 23, 2013). "Art Basel Hong Kong – Local Pride". The Economist. Retrieved February 7, 2016.
- ^ Isabella Tam (January 26, 2016). "Tsang Kin-wah And The Organic Necessity Of Art". The Culture Trip. Retrieved February 7, 2016.
- ^ "How To Hang Wallpaper". Primetime Paint & Paper. 8 February 2013. Retrieved 13 December 2013.
- ^ "How to Hang Wallpaper". thisoldhouse.com. 4 March 2002.
- ^ C. Lynn: Wallpaper in America from the Seventeenth Century to World War I (New York, 1980)
Wallpaper
View on GrokipediaHistory
Origins and early uses
The earliest evidence of wallpaper dates to ancient China around the 2nd century BCE, during the Qin dynasty (c. 200 BCE), where rice paper was painted with inks depicting birds, flowers, and landscapes to create decorative panels for adorning the walls of homes and temples.[2] These early wall coverings served both aesthetic and practical purposes, providing insulation and visual embellishment in living spaces, crafted by skilled artisans using mulberry bark and other plant fibers to produce thin, durable sheets.[8] By the Song dynasty (10th–13th centuries CE), woodblock printing techniques advanced in Asia, enabling the creation of repeatable patterns on paper or silk for wallpaper production. Artisans carved intricate designs into wooden blocks, inked them, and pressed them onto mulberry paper, a refined material made from the inner bark of the mulberry tree, boiled and pulped for smoothness and strength.[9] This method allowed for more efficient replication of motifs like floral and geometric patterns, expanding wallpaper's use beyond elite settings to broader decorative applications in Chinese architecture.[10] In the 14th century, Islamic influences in the Middle East introduced patterned paper hangings for mosques and palaces, employing stencils and natural dyes to achieve vibrant, intricate designs that complemented architectural tilework. These hangings, often featuring arabesque motifs and calligraphy, were produced using techniques adapted from manuscript illumination, with dyes derived from plants and minerals for colorfastness on imported or locally made paper.[11] Wallpaper reached Europe in the 16th century via Silk Road trade routes, initially as luxury temporary decorations for nobility, including hand-painted panels in Italian villas that mimicked frescoes with scenes of landscapes and mythology. Early Chinese artisans' innovations, along with the 13th-century accounts of Marco Polo, who described paper production and its uses during his travels to the Mongol court, played a key role in disseminating knowledge of paper to the West, paving the way for European adoption.[2][12]European developments (18th-19th centuries)
In the late 17th and 18th centuries, France emerged as a leading center for wallpaper production, transitioning from artisanal methods to organized manufacturing. Jean-Baptiste Réveillon established a prominent wallpaper factory in Paris in the mid-18th century, marking a pivotal shift toward industrialized output that allowed for larger-scale production of high-quality papers.[2] Réveillon's facility pioneered the use of specially prepared paper stocks, enabling intricate designs that mimicked luxury textiles and scenic landscapes, including elaborate panoramic scenes inspired by natural and exotic motifs.[13] His innovations in dyeing and printing techniques elevated wallpaper from a novelty to a sophisticated interior element, popular among the French aristocracy before the Revolution.[14] England contributed significantly to wallpaper's stylistic and technical evolution during the mid-18th century, with firms advancing both texture and printing methods. Flock wallpaper, featuring a velvet-like surface created by applying powdered wool or silk fibers to adhesive-coated patterns, gained prominence as an affordable imitation of costly imported fabrics; this technique, refined in English workshops, allowed for opulent, tactile effects in domestic settings.[15] Block-printing innovations, involving carved wooden blocks inked with multiple colors, enabled more complex, multi-hued designs by the 1750s, expanding wallpaper's appeal beyond simple motifs to include florals and geometrics suitable for middle-class homes.[1] Printers at establishments like Bannister Hall near Preston played a key role in scaling these processes, producing rolls that facilitated easier installation compared to earlier sheet-based formats.[16] The Wallpaper Tax, imposed in England from 1712 to 1836, profoundly influenced production and consumption by levying duties on patterned or printed papers—initially 1 penny per square yard, escalating to 1 shilling by 1809—to curb the growing popularity of this alternative to tapestries. This fiscal measure spurred adaptations such as the sale of plain papers for customers to hand-paint or stencil at home, evading taxation, while smuggling of untaxed imports from France and the Netherlands became widespread, distorting market prices and encouraging clandestine workshops.[17] The tax's repeal in 1836 alleviated these constraints, fostering a surge in legitimate production as manufacturers like those in Lancashire embraced freer innovation.[18] Wallpaper's adoption in America during the late 18th century relied heavily on European imports, particularly French panoramic designs that adorned affluent homes as status symbols. Joseph Dufour et Cie, established in 1797, exported elaborate scenic wallpapers depicting voyages and landscapes, such as views of the Pacific inspired by Captain Cook's expeditions, which were installed in U.S. residences to evoke grandeur and global sophistication.[19] Local production began emerging around this period, adapting imported techniques to meet demand, though high costs limited widespread use until the early 19th century.[6] By the 19th century, European wallpaper evolved amid tensions between industrialization and craft revival, exemplified by the Arts and Crafts movement led by William Morris starting in the 1860s. Morris, reacting against mechanized uniformity, championed hand-blocked designs rooted in medieval and natural forms through his firm Morris & Co., emphasizing quality materials and artisanal labor to restore aesthetic integrity to interiors.[1] His 1876 "Pimpernel" pattern, featuring swirling tulips, pimpernel flowers, and foliage in subtle blues and greens, embodied this ethos with its rhythmic, organic composition printed on high-grade paper.[20] These efforts influenced a broader rejection of mass-produced goods, promoting wallpapers that integrated seamlessly with furniture and textiles in reformist homes.[21]20th century industrialization
The 20th century marked a pivotal era for wallpaper production, transitioning from 19th-century mechanization to widespread industrialization that democratized access to decorative wall coverings through high-volume manufacturing and innovative materials. Early in the century, advancements in printing techniques, such as the surface roller process developed in the early 19th century in Britain, utilized rubber cylinders to transfer designs onto paper, enabling efficient, continuous production of both paper-based and emerging vinyl wallpapers. This method, building on earlier cylindrical drum innovations, allowed for smaller pattern repeats and simpler motifs, significantly boosting output and affordability for mass markets. By the 1930s, global production had surged to approximately 100 million rolls annually, reflecting the industry's adaptation to consumer demand in Europe and North America.[22][23] During the interwar period (1920s-1930s), Art Deco influences dominated wallpaper design in Europe and America, characterized by jazz-inspired zig-zag patterns, Cubist geometric motifs, and exotic Oriental themes drawn from popular culture like Arabian Nights and Egyptian revivals. Designers embraced bold, symmetrical forms and metallic accents to evoke luxury and modernity, with production shifting toward vibrant, machine-printed patterns suitable for urban apartments and theaters. World War I had disrupted supply chains, but postwar recovery spurred factory expansions, though the Great Depression tempered growth until the late 1930s. Wartime material shortages during World War II further strained resources, redirecting paper to essential uses and halting non-military printing in many regions.[1] The post-World War II economic boom in the 1950s and 1960s fueled explosive demand for wallpapers, particularly in the expanding U.S. and UK suburban housing markets, where new homes required quick, stylish interiors. Innovations like pre-trimmed rolls and ready-pasted papers, introduced around 1961, simplified installation for homeowners, while vinyl coatings—developed in the early 1960s—offered durable, washable surfaces resistant to moisture and wear. This era saw a stylistic shift from the 1950s' "Good Design" emphasis on flat, linear abstracts to the 1960s' bold Op Art and Pop-inspired patterns in vivid colors, aligning with youthful, optimistic consumer tastes. U.S. production exemplified this growth, with manufacturers scaling up to meet suburban needs, contributing to the industry's peak before the 1973 oil crisis.[1] Environmental concerns emerged as production intensified, with early awareness of toxic pigments prompting regulatory changes. Lead-based inks and paints, common in mid-century wallpapers for their opacity and durability, raised health risks like poisoning from flaking or inhalation; the U.S. Consumer Product Safety Commission banned lead content exceeding 0.06% in consumer paints and similar products in 1978, spurring the adoption of safer, synthetic pigments across the industry. Key events, such as the 1937 Paris International Exposition, highlighted modernist wallpapers through pavilions showcasing innovative interiors with geometric and streamlined designs, influencing global trends toward functional elegance. These developments solidified wallpaper's role as an accessible, industrialized home essential by century's end.[24][1]21st century globalization and sustainability
In the early 2000s, the wallpaper industry began prioritizing eco-friendly materials to address environmental concerns, with manufacturers developing products from recycled paper—often incorporating at least 60% waste paper—and non-toxic, low-VOC inks to minimize indoor air pollution and resource depletion.[25][26] These advancements aligned with broader sustainability goals, reducing the reliance on virgin fibers and harmful chemicals in production. By 2010, certifications like the Forest Stewardship Council (FSC) standards gained widespread adoption, ensuring wallpapers were sourced from responsibly managed forests and promoting verifiable environmental responsibility.[27] Globalization transformed the wallpaper market in the 21st century, with production shifting heavily toward Asia. China emerged as the dominant global hub for wallpaper manufacturing by the 2010s, leveraging its vast infrastructure to supply a substantial share of international demand through efficient, large-scale operations.[28] In emerging markets like India, the sector experienced rapid growth, driven by culturally inspired digital designs that fused traditional motifs—such as paisleys, mandalas, and Mughal patterns—with advanced printing technologies, catering to rising urbanization and interior design trends.[29][30] The COVID-19 pandemic from 2020 accelerated home renovation activities worldwide, heightening demand for wallpapers as consumers invested in personalized living spaces, with the global market, estimated at USD 1.9 billion in 2024, projected to reach USD 2.44 billion by 2030, growing at a CAGR of 4.5% from 2025 to 2030.[31] This surge also spurred interest in antimicrobial wallpapers, incorporating materials resistant to bacteria and viruses to support post-pandemic hygiene standards in residential and commercial settings.[32] Sustainability innovations have further shaped the industry, including prototypes of biodegradable wall coverings derived from mushroom mycelium and algae-based composites by 2023, offering renewable alternatives to traditional synthetics for interior applications like panels and tiles.[33][34] Circular economy practices, such as developing recyclable backings from post-consumer materials, have gained traction to extend product lifecycles and reduce landfill waste. Key regulatory developments, including the European Union's Green Deal launched in 2019, have imposed measures to curb plastic pollution—such as targets for recycled content and waste minimization—prompting a decline in plastic-based wallpapers like vinyl by 2025 in favor of bio-based options.[35][36]Types and Materials
Traditional wallpapers
Traditional wallpapers, primarily produced from paper substrates using natural materials and manual techniques, formed the backbone of interior decoration from the 17th to the 19th centuries. These wallpapers were typically hand-printed or, later, machine-printed to replicate luxurious textiles, architectural elements, and natural motifs, serving as affordable alternatives to imported silks, tapestries, and paneling in European homes. Early examples drew from Asian influences, particularly Chinese exports, while European innovations emphasized repeatable patterns for domestic use.[1] Paper-based wallpapers, the most common traditional type, were made from rag or wood pulp paper and printed using wooden blocks dipped in distemper pigments, a labor-intensive process that could involve up to 30 blocks for complex polychrome designs. Grounded varieties featured a plain colored background onto which patterns were applied, while ungrounded types incorporated self-colored paper without a separate ground layer, allowing the base material to contribute to the overall hue. A prominent example is the damask pattern, which emerged in 18th-century Europe to mimic opulent silk damasks; these symmetrical, reversible motifs of scrolling foliage and florals were block-printed in metallic or vibrant inks, as seen in crimson and gold designs from English manufactories around 1750.[1][6][37] Flock wallpapers, introduced in the late 17th century, provided a textured, velvet-like surface by applying powdered wool fibers—often textile waste—onto areas coated with adhesive varnish, creating a raised, tactile effect that imitated costly cut-velvet hangings. Originating in England and France, these were initially simple in design but gained popularity for their richness under candlelight, with early patterns limited to bold motifs like scrolls or florals on dark grounds. By the 19th century, production was standardized through mechanical stamping and finer flocking techniques, enabling widespread use in historic interiors such as palaces and grand homes for a luxurious, moth-resistant finish.[15][1] Relief or embossed wallpapers, popular during the Victorian era, achieved raised designs through molding or pressing paper against engraved cylinders or plates, simulating architectural features like wood paneling, stucco, or embossed leather without the expense of real materials. These were often produced in durable, paintable formats using thick paper or composites, with motifs such as geometric panels or faux bois (wood-grain effects) that mimicked ornate interiors; German imports in the 1850s–1860s exemplified small gold-embossed patterns on neutral grounds for subtle depth.[6][37] Traditional wallpapers were standardized in roll format by the mid-19th century, typically measuring 20.5 inches (52 cm) wide by 33 feet (10 meters) long to suit European metrics and facilitate installation in rooms of varying sizes. Pattern repeats, essential for seamless matching, commonly ranged from 12 to 27 inches, allowing economical use while accommodating the block-printing process; larger repeats, up to 24 inches, were typical for damask or scenic designs to maintain visual continuity.[37][6] Pattern classifications in traditional wallpapers encompassed floral motifs, with blooming roses and carnations symbolizing abundance; geometric designs, featuring interlocking straps or lattices for balanced symmetry; scenic panels depicting landscapes or architectural vistas, often non-repeating for mural-like effects; and stripe motifs, simple vertical bands in contrasting colors for understated elegance. Cultural influences included Chinese rice paper exports, hand-painted on thin, lightweight sheets from the late 17th century, which introduced exotic floral and bird-filled scenes to European markets via the East India Company, inspiring chinoiserie styles with sinuous trees and daily life vignettes.[1][38][6]Contemporary materials and finishes
Contemporary wallpaper materials have evolved to prioritize durability, environmental considerations, and enhanced aesthetics, with innovations emerging since the mid-20th century. Vinyl wallpapers, introduced in the 1920s, feature a PVC coating that provides superior moisture resistance, making them suitable for high-humidity areas like bathrooms and kitchens.[39] These include subtypes such as solid sheet vinyl, which offers a uniform surface without printed patterns, and printed vinyl, which allows for decorative designs while maintaining scrubbable ratings for easy cleaning and stain resistance.[40] Non-woven and fabric-backed wallpapers, developed in the early 1990s, combine synthetic and natural fibers to create breathable hybrids that minimize installation issues like bubbles and shrinking.[41] These materials facilitate easier application and removal, as they do not expand when wet, and often incorporate fire-retardant properties meeting Class A standards under ASTM E84 for flame spread and smoke development.[42] Eco-materials like grasscloth and cork wallpapers utilize natural fibers such as bamboo, jute, sisal, and cork bark to deliver organic textures and sustainable appeal.[43] Grasscloth, woven from renewable plant sources, provides a tactile, hypoallergenic surface with low VOC emissions, while cork offers inherent UV resistance and sound-absorbing qualities for interior durability.[44] These options emphasize biodegradability and minimal environmental impact compared to synthetic alternatives. As of 2025, sustainable innovations include bio-based wallpapers using recycled fibers and low-emission inks to meet stricter environmental regulations.[45][46] Textured wallpapers, particularly those featuring natural materials such as grasscloth, sisal, jute, and similar options, as well as faux variants, are available from numerous online retailers. Notable online sources include DecoratorsBest, which offers a wide selection from luxury brands such as Phillip Jeffries and Schumacher; Tempaper & Co., specializing in faux grasscloth, sisal, and jute; Lulu & Georgia, featuring grasscloth and paperweave; Chasing Paper, known for faux grasscloth; Annie Selke, offering grasscloth; and York Wallcoverings, with various textured designs. Other strong options include West Elm, Spoonflower, and Backdrop Home for textured and natural material wallpapers.[47][48][49][50][51][52][53][54][55] Modern finishes enhance both functionality and visual interest, including matte for a subtle, non-reflective look; gloss for added shine and washability; metallic foils for luminous effects; and textured variants like lenticular surfaces that create 3D illusions through light refraction.[56] Paintable wallpapers, typically non-woven or vinyl-based, support multiple recoats, allowing users to refresh colors without removing the base layer.[57] Safety standards for contemporary wallpapers mandate lead-free compositions, aligning with the 1978 U.S. Consumer Product Safety Commission ban on lead in paints and coatings at levels above 0.009% by weight.[58] Formaldehyde emissions from wallpapers are addressed under industry standards such as those from the International Wallcovering Association (IGI), which limit releases; the EPA's 2025 risk evaluation under TSCA identified unreasonable health risks from formaldehyde in building materials, including potential sources in wallcoverings, prompting upcoming risk management rules to minimize inhalation hazards in indoor environments.[59][60][61]Production Processes
Printing and manufacturing techniques
Block printing, one of the earliest techniques for producing wallpaper, involves hand-carving designs into wood or linoleum blocks, which are then inked and pressed onto paper to create patterns.[62] The process begins with preparing the paper by coating it with a background layer on a grounding table, followed by drying on racks; the carved blocks, typically made from pear wood for durability, are inked using paint-saturated felt and pressed via a foot-operated lever onto the paper, which is advanced by the pattern's repeat length using registration pins for alignment.[62] Each color in the design requires a separate block and pass, often necessitating multiple blocks per color to ensure precise registration across the pattern; for instance, complex designs may employ 10 to 30 blocks total for up to 15 colors, making this method labor-intensive and suitable primarily for limited-edition or artisanal production.[63] This technique allows for intricate, textured results but limits output to small volumes due to the manual nature of the pressing and alignment steps.[64] Screen printing emerged as a more efficient method for mid-volume production, utilizing silk or mesh screens with stencils to apply ink layers onto the paper substrate.[65] In the flat-bed variant, ink is forced through the stencil using a squeegee on a stationary screen, with the paper moved between color applications and dried accordingly; this approach supports vibrant, opaque colors with crisp edges and can accommodate metallic or transparent inks.[65] Rotary screen printing, a continuous variant introduced in the early 1950s, employs rotating mesh cylinders—one per color—where a squeegee presses ink through the cut mesh onto the moving paper web, enabling higher speeds of up to 80 yards per minute and supporting designs with up to eight colors through sequential passes followed by oven drying.[7][65] This rotary process revolutionized mid-scale manufacturing by allowing seamless roll production, though it requires precise setup for each color cylinder to maintain pattern registration.[66] Digital printing, particularly inkjet systems adopted widely after 2000, facilitates on-demand production by directly applying inks from digital files onto the substrate without physical plates or screens.[67] These systems achieve high resolutions of up to 1200 DPI, enabling detailed reproductions of complex artwork, while UV-curable inks provide immediate curing under ultraviolet light for enhanced fade resistance and durability.[68] The process involves feeding the paper roll through the printer, where piezoelectric or thermal inkjet heads deposit colored droplets precisely, followed by UV exposure to solidify the image; this method excels in short runs and customization, reducing setup time compared to traditional techniques.[69] The overall manufacturing workflow for wallpaper integrates these printing methods within a sequence of preparatory and finishing steps to produce finished rolls. It begins with pulp mixing, where wood chips are pulped into a slurry using chemical treatments like chlorine dioxide for bleaching, optionally blended with synthetic fibers for added strength, and formed into continuous paper sheets via a moving mesh belt and rollers that remove excess water.[7] The sheets are then coated with materials such as kaolin clay or latex to improve opacity, print receptivity, and handling, followed by drying in heated chambers to set the coating.[7] After printing via one of the aforementioned techniques, the web undergoes further drying between color layers to prevent smearing, and finally, slitting, where wide master rolls (typically 65 inches across and up to 22,000 feet long) are cut lengthwise into narrower sub-rolls (e.g., 21 inches wide) using rotary blades, then rewound into consumer lengths of 15 yards for residential use or 30-60 yards for commercial applications.[7] Quality control throughout the workflow ensures consistency and longevity, with tests focused on attributes like colorfastness to verify the prints' resistance to environmental factors. For instance, lightfastness is assessed via standards like ISO 105-B02 using xenon arc lamps to simulate exposure, ensuring minimal fading under controlled conditions.[70][71] Additional checks include visual inspections for color uniformity, adhesion strength, and edge straightness, alongside mechanical tests for tensile properties per standards from organizations like the Chemical Fabrics and Film Association (CFFA).[7] These measures confirm the product's performance before packaging. In recent years, production has shifted toward sustainable practices, including water-based inks and PVC-free substrates to reduce environmental impact, as per EU REACH regulations.[35] In modern factories, production scales have intensified with automated flexographic presses, which use flexible rubber plates on rotating cylinders to apply inks at high speeds, enabling output exceeding 1,000 rolls per hour in optimized facilities through continuous web handling and multi-color stations.[7] This efficiency supports large-volume runs while maintaining precision via inline drying and tension controls.[72]Sizing, formats, and quality standards
Wallpaper products adhere to standardized dimensions that vary by region to facilitate manufacturing, shipping, and consumer use. In the United States, the common double roll measures 27 inches wide by 27 feet long, providing approximately 60 square feet of coverage before accounting for patterns or waste.[73] In contrast, the European single roll standard is 21 inches wide by 33 feet long, yielding about 56 square feet.[73] Mural panels, designed for seamless large-scale applications, are typically produced in widths up to 4 feet per panel, though custom murals can extend to total widths of 12 feet or more by joining multiple panels.[74][75] Pattern matching ensures visual continuity across wall surfaces and influences material efficiency during production and application. Straight match patterns align directly vertically from strip to strip, while drop matches (including half-drop and quarter-drop variations) offset subsequent strips by a fraction of the repeat distance, such as half the pattern height. Random match designs require no alignment, simplifying cuts but limiting intricate motifs. Complex patterns with repeats often result in 10-20% material waste due to trimming for alignment.[76][77] Quality metrics evaluate wallpaper's performance and longevity, focusing on physical properties that withstand environmental stresses. Grammes per square meter (GSM) measures paper density, with typical ranges of 120-150 GSM providing adequate durability for residential use, balancing flexibility and tear resistance.[78] Tensile strength tests, such as those under ASTM D751, assess the material's ability to resist breaking under tension, ensuring it endures handling and installation without deformation.[79] Type II vinyl wallcoverings require a minimum weight of 20 ounces per linear yard for durability; adhesion strength is evaluated separately through peel and scrub tests to ensure proper bonding and peel resistance.[80] International standards regulate key attributes like color stability to guarantee product reliability across markets. The ISO 105-B02 method tests color fastness to light using xenon arc lamps, simulating prolonged exposure to ensure minimal fading over time.[71] Packaging standards protect wallpaper during transport while aiding precise usage estimates. Rolls are typically wound around sturdy cardboard tubes to prevent creasing and maintain flatness, then encased in protective plastic or paper wrappers.[81] Coverage calculators, based on regional roll sizes, indicate that a standard U.S. double roll covers approximately 56-61 square feet, while a European single roll provides approximately 56 square feet, depending on width and length variations.[82]Installation and Maintenance
Adhesives and preparation
Wallpaper adhesives have evolved significantly since the 19th century, when animal glues derived from hides and bones were commonly used for bonding due to their strong adhesion properties, though they were prone to brittleness and mold growth over time.[83] By the late 1800s, plant-based alternatives emerged, with Ferdinand Sichel inventing a wheat starch paste in 1888 that offered better workability and reduced preparation time compared to animal glues.[84] This shift continued into the 1930s with the introduction of cellulose ethers, such as methylcellulose, which provided improved flexibility, water resistance, and ease of application in industrial wallpaper production.[85][86] Traditional adhesives like wheat paste remain popular for their natural composition and DIY accessibility, consisting of starch extracted from wheat flour mixed with water. These pastes are boiled briefly to activate the starch, providing a strong, reversible bond suitable for delicate or historic wallpapers, though they require fresh preparation to avoid fermentation. Synthetic adhesives, particularly polyvinyl acetate (PVA)-based formulas designed for vinyl wallpapers, dominate modern use; these ready-mixed options typically contain 40-60% solids for enhanced tack and durability, ensuring better performance on non-porous surfaces.[87][88] Contemporary adhesives include pre-pasted varieties, where a dried starch layer on the wallpaper back is activated by soaking in water for 5-10 minutes, simplifying application for non-professionals. Self-adhesive options, often using pressure-sensitive acrylic polymers, allow peel-and-stick installation without additional glue, making them ideal for temporary rentals or textured surfaces where traditional pastes might fail.[89][90] Proper wall preparation is essential for adhesive efficacy, beginning with priming using sizing agents—thin, water-based solutions like diluted PVA or starch formulations—that seal porous surfaces such as new drywall, preventing excessive moisture absorption and ensuring even adhesion.[91] Common tools for this process include wide brushes for applying sizing and paste, as well as troughs or buckets for mixing and dipping strips, which help maintain a consistent application without drips. Compatibility is critical; for instance, adhesives bond poorly to oil-based paints, requiring sanding or a bridging primer to create a suitable surface.[92][93] Modern specialized wallpaper primers (also known as wallcovering primers, pre-wallpaper primers, or sizing in some contexts) are hard-drying acrylic coatings applied to walls before wallpaper installation. Unlike general wall primers such as PVA-based or multi-purpose drywall primers (used primarily for painting), these are formulated specifically for wallpaper adhesion and future removal needs. Key purposes include:- Creating a surface with strong adhesion for wallpaper paste while allowing "slide" (repositionability) during installation to adjust seams and positioning without tearing.
- Acting as a protective barrier to prevent wallpaper paste from soaking into porous substrates like drywall paper or softening underlying latex paint, which reduces damage during future removal and avoids issues like torn drywall facing.
- Ensuring even absorption of paste for uniform drying, minimizing bubbles, peeling, or seam curling.
- Providing better coverage and durability, often resisting scoring from tools and supporting slow-curing paste processes.