Hubbry Logo
CycloalkeneCycloalkeneMain
Open search
Cycloalkene
Community hub
Cycloalkene
logo
7 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Cycloalkene
Cycloalkene
Cycloalkene
View on Wikipedia
from Wikipedia

In organic chemistry, a cycloalkene or cycloolefin is a type of alkene hydrocarbon which contains a closed ring of carbon atoms and either one or more double bonds, but has no aromatic character. Some cycloalkenes, such as cyclobutene and cyclopentene, can be used as monomers to produce polymer chains.[1] Due to geometrical considerations, smaller cycloalkenes are almost always the cis isomers, and the term cis tends to be omitted from the names. Cycloalkenes require considerable p-orbital overlap in the form of a bridge between the carbon-carbon double bond; however, this is not feasible in smaller molecules due to the increase of strain that could break the molecule apart. In greater carbon number cycloalkenes, the addition of CH2 substituents decreases strain.[2] trans-Cycloalkenes with 7 or fewer carbons in the ring will not occur under normal conditions because of the large amount of ring strain needed. In larger rings (8 or more atoms), cis–trans isomerism of the double bond may occur. This stability pattern forms part of the origin of Bredt's rule, the observation that alkenes do not form at the bridgehead of many types of bridged ring systems because the alkene would necessarily be trans in one of the rings.

Examples

[edit]

Nomenclature

[edit]

Cycloalkenes follow a similar nomenclature system to alkenes, but the carbons are numbered starting at a carbon on the double bond and then through the double bond and around the ring.[3] This method is used to keep the index numbers small.

  • 1-methylcyclohexene
    1-methylcyclohexene
  • 3-methylcyclohexene
    3-methylcyclohexene

Properties

[edit]

Cycloalkenes with a small ring have about 20° more bond angle strain than a cycloalkane of the same size.[4] This is because the bond angle for an alkene, C-C=C, is 122°, while the bond angle for an alkane, C-C-C, is 112°. When these carbons form a small ring, the alkene which has a larger bond angle will have to compress more than the alkane causing more bond angle strain.[4]

Cycloalkenes have a lower melting point than cycloalkanes of the same size. The lowered melting point is due to the double bond preventing the compound from compact packing.

Cycloalkenes generally reflect physical properties of their cycloalkane. In physical states, only the smaller cycloalkenes are gases while the others are mostly liquid. These molecules are also more reactive than cycloalkanes due to increased electron density shifts of the double bond. [5]

Trans isomers

[edit]

As previously mentioned, cis-isomers of cycloalkenes exhibit more stability than trans-isomers; however, on an experimental and computational level, this property is only applicable to cycloalkenes with 10 carbons or less. As the number of carbons increase, the possibility of a trans-isomer occurring also increase.[2] The geometrical considerations as analyzed by computational analysis are as follows.

The most stable trans-isomers of 10 ring or greater cycloalkenes exhibit 4  irregularities from standard geometric norms. The first irregularity is twisted planes of substituents along the C=C. Using C=C as the stable axis, 2 substituents of 1 carbon can be visualized on the same plane, equally applied to the other carbon. These planes are not planar and instead one carbon substituent plane twists along the axis away or toward the other carbon’s plane. This twisting leads to pyramidalization forming a pyramidal alkene which is the second irregularity. A greater angle of twisting, usually results in lower carbon number rings and decreases as the carbon number increases. Pyramidalization is important in highered number rings, because it increases p-orbital overlap for stability, and reduces torsional strain.[2]

Bond length between the C=C and corresponding vinylic carbons also vary. In smaller cycloalkenes, it is expected for the bonds to be greater in length uniformly to account for increased strain, but for example, trans-cycloheptane has varying bond lengths. Also, the vinylic carbons on trans cyclohexanes exhibit longer bond lengths than their respective cis isomer for trans-cycloheptane through trans-cyclononene (7 carbon and 9 carbon cycloalkenes).[2]

Synthesis reactions

[edit]

Ring-closing metathesis

[edit]

Ring-closing metathesis switches out functional groups from one or multiple terminal alkenes to form a cycloalkene.[citation needed] This process can be used to form cycloalkenes of either E or Z configurations, depending on the stereochemistry of the second ring strain.[6]

Formation of a cycloalkane via ring closing metathesis
Formation of a cycloalkane via ring closing metathesis

Birch reduction

[edit]

Birch reduction is a possible method to reduce reduces aromatic compounds into cycloalkenes, specifically cyclohexadiene.[7]

Formation of a cycloalkane via Birch Reduction
Formation of a cycloalkane via Birch Reduction

Diels-Alder reaction

[edit]

The Diels-Alder reaction, also known as cycloaddition, combines a conjugated diene and an alkene to form cycloalkene. This is a concerted process, with bonds forming and breaking simultaneously.[7]

Formation of a cycloalkane via a Diels-Alder Reaction
Formation of a cycloalkane via a Diels-Alder Reaction

Cyclization reactions

[edit]

Cyclization reactions, or intramolecular addition reactions, can be used to form cycloalkenes. These reactions primarily form cyclopentenones, a cycloalkene that contains two functional groups: the cyclopentene and a ketone group.[8] However, other cycloalkenes, such as Cyclooctatetraene, can be formed as a result of this reaction.[7]

Formation of a cyclohexane from a non-cyclic compound via a Cyclization Reaction
Formation of a cyclohexane from a non-cyclic compound via a Cyclization Reaction

Electrocyclic reactions

[edit]

Reactions of conjugated double-bond systems can be synthesized into cycloalkenes through electrocyclic reactions.[9] Addition of heat or photolysis causes a reversible reaction that causes one pi bond to become a sigma bond, which closes the ring and creates a cycloalkene.[7]

Formation of a cycloalkane via an electrocyclic reaction
Formation of a cycloalkane via an electrocyclic reaction

Intramolecular McMurry reactions

[edit]

When two carbonyl groups are coupled and undergo a McMurry reaction, there is a possibility of the formation of cycloalkenes under specific conditions.[7] When both carbonyls are within the same molecule and not sufficiently separated from each other, a cycloalkene can be formed through an intramolecular McMurry reaction.[7]

Formation of a cycloalkane via an Intramolecular McMurry Reaction

See also

[edit]

References

[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Cycloalkene

View on Grokipedia
from Grokipedia
A cycloalkene is a cyclic featuring one or more carbon-carbon s within a closed ring of carbon atoms, excluding aromatic systems that satisfy of 4n + 2 π electrons. The general molecular formula for a simple monocyclic cycloalkene with a single double bond is CnH2n−2C_nH_{2n-2}, where n ≥ 3, as exemplified by (C3H4C_3H_4), the smallest member of the class. Nomenclature for cycloalkenes follows IUPAC conventions by replacing the "-ane" ending of the corresponding with "-ene" and numbering the ring carbons such that the double bond receives the lowest possible locants, typically starting between carbons 1 and 2 for unsubstituted compounds. For substituted derivatives, numbering prioritizes the lowest set of locants for substituents after assigning the double bond its positions. Common examples include (C6H10C_6H_{10}) and (C5H8C_5H_8), which are stable and widely studied due to minimal in medium-sized rings. Cycloalkenes exhibit physical properties akin to linear alkenes, including insolubility in , density less than for smaller members, and boiling points that increase with molecular weight but are generally lower than those of isomeric alkanes or cycloalkanes. In small rings (n = 3 or 4), significant angle strain distorts the sp²-hybridized bond angles from the ideal 120°, enhancing reactivity compared to acyclic alkenes; for instance, trans configurations are unstable in rings smaller than eight carbons, with cis isomers predominating and trans-cyclooctene being less stable than its cis counterpart by approximately 40 kJ/mol. They are prevalent in natural products and serve as key building blocks in . Chemically, cycloalkenes participate in addition reactions typical of alkenes, such as catalytic to yield cycloalkanes using Pd/C, stereospecific to form trans-dihalides, and epoxidation or , often influenced by the ring's conformational constraints. Dehydrogenation of certain cycloalkenes, like those with five or six carbons, can produce conjugated dienes such as or even aromatic . Smaller cycloalkenes, due to , may undergo ring-opening reactions or rearrangements under milder conditions than their acyclic analogs.

Definition and Nomenclature

Definition and Examples

Cycloalkenes are non-aromatic hydrocarbons characterized by a ring of carbon atoms containing one or more carbon-carbon s. For monocyclic compounds with a single double bond, known as monocyclic monoalkenes, the general molecular formula is \ceCnH2n−2\ce{C_nH_{2n-2}}. These compounds differ from cycloalkanes, which are saturated cyclic hydrocarbons with the general formula \ceCnH2n\ce{C_nH_{2n}}, lacking any double bonds. They also contrast with cycloalkadienes and polyenes, which feature multiple double bonds within the ring structure. Representative examples illustrate the diversity and varying stability of cycloalkenes, primarily influenced by ring size. Cyclopropene, with its three-membered ring, is highly unstable due to significant . Cyclobutene, featuring a four-membered ring, is also strained and reactive. Cyclopentene, a five-membered ring, exhibits moderate stability suitable for common laboratory use. Cyclohexene, the six-membered analog, is the most stable and widely utilized cycloalkene in . Larger rings such as cycloheptene and cyclooctene demonstrate increasing stability with ring size, approaching that of acyclic alkenes.

Nomenclature

The nomenclature of cycloalkenes adheres to the substitutive system outlined in the IUPAC Recommendations for the Nomenclature of Organic Chemistry (Blue Book, 2013). For unsubstituted monocyclic cycloalkenes containing a single double bond, the parent name is formed by adding the suffix "-ene" to the name of the corresponding cycloalkane, with the position of the double bond assigned locants 1 and 2; the locant "1" is omitted in the final name. Thus, the six-membered ring compound is named cyclohexene, which is a retained preferred IUPAC name (PIN). Similarly, cyclopentene and cycloheptene are retained PINs for their respective ring sizes. When substituents are present on a monocyclic cycloalkene, the carbon atoms of the receive locants 1 and 2, and numbering proceeds around the ring in the direction that assigns the lowest possible to the (or substituents) at the first . Substituents are cited as prefixes in , with their positions indicated. For instance, a attached to one of the double-bond carbons is named 1-methylcyclohexene, while attachment to an adjacent saturated carbon yields 3-methylcyclohexene; the alternative numbering that would give higher locants is avoided. In cases where substituents are on the , the 1 is assigned to the substituted sp²-hybridized carbon to achieve the lowest set of locants overall. For cycloalkenes with multiple double bonds, the suffix is modified to "-diene", "-triene", or similar, and the locants for all double bonds are chosen to provide the lowest possible set when compared term by term. Numbering begins at one end of the conjugated or isolated system, proceeding around the ring to minimize the locants for the multiple bonds as a principal feature; substituents then receive the lowest possible locants. An example is cyclohexa-1,3-, preferred over cyclohexa-1,4- for the conjugated due to the lower locant set (1,3 vs. 1,4). In bicyclic cycloalkene systems, nomenclature employs the von Baeyer system for bridged compounds, where the parent hydride name is "bicyclo[longest bridge.middle bridge.shortest bridge]alkane" (with "alkane" based on total carbons), followed by the "-ene" and the for the position, chosen to give the lowest possible number. For example, the bridged seven-carbon system with a between positions 2 and 3 is named bicyclo[2.2.1]hept-2-ene; the trivial name is retained for general but not as a PIN. Fused ring cycloalkenes, excluding fully aromatic systems, are named using indicated hydrogen on the parent fused (e.g., octahydro-1H-indene with specified double-bond positions), prioritizing lowest for unsaturations. While systematic names are preferred for complex structures, trivial names such as persist in common usage and are accepted as PINs for the parent compounds, facilitating a transition to fully systematic for derivatives.

Structure and Properties

Molecular Structure

Cycloalkenes consist of a closed ring of carbon atoms containing at least one carbon-carbon , with the carbons involved in the double bond exhibiting sp² hybridization. This hybridization leads to a trigonal planar arrangement around these carbons, where the three bonds lie in a plane with ideal bond angles of 120° between them. The cyclic structure imposes geometric constraints that often distort these ideal angles, particularly in smaller rings. For instance, in cyclopentene, the bond angle at each sp² carbon (C=C–C) measures approximately 123.9°, slightly wider than the ideal due to the effort to accommodate the ring closure while maintaining partial sp² character. Similarly, in cyclohexene, the corresponding C1–C2–C3 angle is 123.3°, reflecting minimal distortion in this medium-sized ring. These distortions arise from the need to balance the sp² geometry with the overall ring topology. In small rings like cyclopropene and cyclobutene, the pi bond is additionally strained due to misalignment of the p orbitals, reducing overlap efficiency. The carbon-carbon double bond in cycloalkenes comprises a sigma bond formed by end-to-end overlap of sp² hybrid orbitals and a pi bond from sideways overlap of unhybridized p orbitals, resulting in a bond length of about 1.34 Å—substantially shorter than the typical C–C single bond length of 1.54 Å found in the saturated portions of the ring. In cyclopentene, the experimental C=C length is 1.335 Å, with adjacent C–C bonds at 1.508 Å; in cyclohexene, these values are 1.34 Å for C=C and 1.54 Å for C–C. The pi bond lies perpendicular to the local plane defined by the sp² carbons and their attached atoms, which in larger cycloalkenes aligns roughly perpendicular to the average plane of the ring. To alleviate and torsional strain, especially in medium-sized rings, cycloalkenes adopt non-planar conformations. , for example, features a half-chair arrangement where the and adjacent carbons remain nearly coplanar, while the opposite side of the ring puckers out of plane, reducing eclipsing interactions between hydrogens. This puckering allows the sp³-hybridized carbons to approach tetrahedral angles closer to 109.5° without compromising the planarity required for effective pi orbital overlap. For monocyclic cycloalkenes, the general structural formula is CnH2n−2C_nH_{2n-2} (where n≥3n \geq 3), depicted as a ring of nn carbon atoms with one double bond and the remaining bonds being single, saturated with hydrogen atoms to satisfy valences. A representative structure is cyclohexene, shown below in a simplified line notation emphasizing the double bond integration:

CH2 / \ CH2 CH2 | | CH=CH - CH2

CH2 / \ CH2 CH2 | | CH=CH - CH2

This formula highlights the unsaturation equivalent to two fewer hydrogens than in the corresponding cycloalkane CnH2nC_nH_{2n}.

Physical Properties

Cycloalkenes exhibit boiling points that are generally comparable to or slightly higher than those of the corresponding cycloalkanes for medium-sized rings, attributed to the presence of the carbon-carbon which marginally increases molecular polarity and intermolecular forces compared to the fully saturated analogs. For instance, has a boiling point of 82.5 °C, slightly above that of at 80.7 °C. However, this trend reverses in smaller rings, where the angle strain in cycloalkenes leads to lower boiling points; boils at 44.2 °C versus 49.3 °C for , and cyclobutene at 3.7 °C compared to 12.5 °C for cyclobutane. Melting points follow a similar pattern, with cycloalkenes often displaying lower values due to disrupted crystal packing from the rigid ; melts at -103.5 °C, well below 's 6.5 °C. The densities of cycloalkenes are slightly higher than those of cycloalkanes, typically ranging from 0.8 to 0.9 g/cm³ at 20 °C, owing to the greater around the that enhances molecular compactness. For example, has a density of 0.811 g/cm³, exceeding cyclohexane's 0.779 g/cm³. Cycloalkenes are insoluble in due to their nonpolar nature but readily dissolve in organic solvents such as , , and , facilitating their use in synthetic applications. In infrared (IR) spectroscopy, cycloalkenes display a characteristic absorption band for the C=C stretching vibration around 1650 cm⁻¹, which is medium-intensity and diagnostic for the presence of the functionality. This band can shift slightly with ring size, appearing at higher wavenumbers (up to 1670 cm⁻¹) in smaller strained rings due to increased s-character in the . (¹H NMR) spectroscopy reveals vinylic protons (those attached to the sp² carbons) at chemical shifts of 5-6 ppm, typically as multiplets reflecting coupling with adjacent allylic protons, providing a key identifier for the position. Physical properties of cycloalkenes vary notably with ring size, particularly in volatility, where smaller rings (e.g., three- to five-membered) show increased volatility and lower boiling points relative to cycloalkanes because of ring strain that reduces effective intermolecular interactions. In larger rings (seven or more members), properties align more closely with acyclic alkenes, with boiling points and densities increasing steadily with molecular weight.

Stability and Strain

The stability of cycloalkenes is significantly influenced by ring strain, which arises from deviations in bond angles, torsional interactions, and steric effects within the cyclic structure. Unlike acyclic alkenes, where sp²-hybridized carbons adopt ideal bond angles of 120°, cycloalkenes in small rings experience substantial angle strain as the double bond forces compressed geometries. This strain is particularly pronounced in three- and four-membered rings, elevating the ground-state energy and increasing reactivity. In larger rings, angle strain diminishes, but other factors come into play to determine overall stability. Angle strain in cycloalkenes primarily affects the sp² carbons, where the bond angles deviate markedly from 120°. For instance, in , the C–C=C bond angle is approximately 71°, representing a 49° deviation from the ideal and contributing to a total of about 228 kJ/mol. This high strain results from both the compressed geometry at the and the inherent ring puckering limitations. In cyclobutene, the corresponding angle is around 90°, still causing notable distortion (30° deviation), though less severe than in . As ring size increases to five or six members, the angles at the sp² carbons approach the ideal 120°, measuring approximately 124° in and 123° in , minimizing angle strain and approaching acyclic-like geometries. Torsional strain arises from eclipsed C–C bonds adjacent to the double bond, a feature common to small cycloalkenes due to their planar or near-planar conformations. In and cyclobutene, all vicinal hydrogens and bonds are fully eclipsed, adding 20–50 kJ/mol to the total strain, similar to but exacerbated by the sp² . Cyclopentene exhibits moderate torsional strain from partial eclipsing in its conformation, while adopts a half-chair form that allows staggered arrangements, effectively eliminating torsional contributions. In larger rings (n > 8), conformational flexibility reduces torsional strain, but steric repulsions between non-adjacent atoms can introduce transannular interactions, slightly destabilizing the structure compared to medium-sized rings. Optimal stability occurs in six-membered cycloalkenes, where angle and torsional strains are balanced at near-zero levels, making the least strained among common homologs. The relative stabilities of cycloalkenes can be quantified through heats of (ΔH_hyd), which reflect the difference between the and its saturated counterpart; more strained alkenes release greater upon saturation due to strain relief in the product. Compared to acyclic alkenes like (ΔH_hyd = –126 kJ/mol), small-ring cycloalkenes show more exothermic values, indicating higher instability and reactivity driven by strain alleviation. Cycloalkenes generally exhibit enhanced reactivity toward addition reactions versus acyclic analogs, as the often involves partial strain relief not present in open-chain systems.
CycloalkeneΔH_hyd (kJ/mol)Notes on Strain Relief
–224Extreme angle and torsional strain; highly reactive.
Cyclobutene–132Significant angle strain; more exothermic than acyclic.
–113Minimal angle strain but some torsional; less exothermic, indicating relative stability.
–118Near-zero strain; comparable to but slightly less exothermic than terminal acyclic alkenes.
(acyclic)–126Unstrained reference; standard for monosubstituted alkenes.

Stereochemistry

Cis-Trans Isomerism

In cycloalkenes with fewer than eight carbon atoms in the ring, the cis configuration predominates due to the significant strain imposed by the trans geometry, rendering trans isomers unstable and non-isolable under standard conditions. Trans-cycloalkenes become viable starting from rings of eight or more members, where the increased flexibility allows isolation; for instance, trans-cyclooctene was first successfully isolated in 1953 through selective complexation with followed by decomplexation. To accommodate the trans double bond, these molecules exhibit notable structural distortions, including a twisted π bond with torsion angles up to 25° in trans-cyclooctene, pyramidalization of the sp²-hybridized carbon atoms (deviating from planarity by several degrees), and elongation of the C=C bond to approximately 1.39 Å, compared to 1.34 Å in the corresponding cis isomers. These deviations arise to minimize overall while maintaining partial p-orbital overlap. Stability differences between cis and trans isomers are pronounced, with the trans form of cyclononene possessing a free energy approximately 12 kJ/mol higher than the cis isomer, reflecting the energetic cost of these distortions. Strained trans-cycloalkenes like trans-cyclooctene have gained prominence in for their reactivity in inverse electron-demand Diels-Alder (IEDDA) reactions with tetrazines, enabling applications in and imaging; recent 2024 advancements include optimized TCO derivatives for enhanced kinetics and biocompatibility in cancer therapy. Cis and trans cycloalkenes can be distinguished spectroscopically via ¹H NMR, where the vicinal coupling constants (³J_HH) for the olefinic protons differ markedly: cis isomers typically show values of 6–12 Hz, while trans isomers in larger rings exhibit smaller constants (often 2–5 Hz) due to the twisted geometry altering dihedral angles.

Bredt's Rule

Bredt's rule, codified by German chemist Julius Bredt in 1924 based on observations from chemistry, prohibits the formation of a stable carbon-carbon at the bridgehead position of fused or bridged bicyclic ring systems when the sum of the bridge lengths, denoted as S, is less than 7 to 9. In such small systems, the geometry forces the double bond into a trans configuration within a ring too constrained to support it without excessive distortion. The underlying rationale stems from the requirement for sp²-hybridized carbons in an to maintain planarity for effective π-orbital overlap, which is impossible in small bridged structures due to rigid tethering by the bridges. This leads to high angle and torsional strain, rendering the alkene unstable and prone to rearrangement or ; for example, a in the (bicyclo[2.2.1]heptane) system, where S=5, cannot achieve the necessary coplanar geometry. Exceptions arise in larger bridged systems where S ≥ 9, allowing sufficient flexibility for the double bond to approximate planarity, as demonstrated by the first syntheses of stable bridgehead alkenes in the 1960s, such as in bicyclo[3.3.2]decene derivatives. Recent advancements as of 2024 have enabled the synthesis of stable anti-Bredt alkenes in smaller systems using innovative strategies like anion relay chemistry, further testing the boundaries of the rule. Bulky substituents at the can also stabilize marginally strained examples by sterically enforcing a more planar conformation. In synthesis, guides strategists to circumvent unsaturation in small bicyclic motifs, often requiring indirect constructions or larger ring variants, while rare occurrences in natural products like certain sesquiterpenoids highlight its role in limiting structural diversity to viable geometries.

Reactivity

Electrophilic Addition Reactions

Electrophilic addition reactions represent a key reactivity pathway for cycloalkenes, where the electron-rich π bond of the double bond serves as a nucleophile, attacking electrophiles to form new σ bonds while relieving some ring strain in the process. This mode of reactivity is facilitated by the partial sp³ character of the double-bonded carbons in smaller rings, making the π electrons more accessible compared to acyclic alkenes. The general mechanism involves initial electrophilic attack to generate a cationic intermediate, followed by nucleophilic capture, often leading to stereospecific outcomes due to the cyclic geometry. In the addition of hydrogen halides such as HBr, the reaction proceeds via a two-step mechanism: of the forms a intermediate, which is then trapped by the bromide ion. For symmetrical cycloalkenes like , this yields bromocyclohexane as the product, with the secondary intermediate stabilized by from adjacent methylene groups in the ring. The addition follows , though is less pronounced in unsubstituted cycloalkenes due to symmetry. This process is accelerated in polar solvents, as the polar benefits from . Catalytic hydrogenation of cycloalkenes involves syn addition of dihydrogen across the , typically using (Pd/C) as the catalyst under mild conditions. The reaction occurs on the catalyst surface, where H₂ dissociates and the alkene adsorbs, leading to simultaneous formation of two new C-H bonds from the same face. For , the change is approximately -120 kJ/mol, reflecting the exothermic nature driven by σ bond formation. In strained smaller rings, such as cyclobutene (-132 kJ/mol) or (-113 kJ/mol), the reaction is kinetically faster due to greater strain relief in the , lowering the compared to unstrained analogs. Halogenation with Br₂ proceeds through formation of a three-membered bromonium intermediate, where the π electrons attack one bromine atom, bridging the and generating a . Subsequent backside attack by Br⁻ on the bromonium results in anti addition, producing trans-dihalocycloalkanes. For instance, addition to yields exclusively trans-1,2-dibromocyclopentane, with the enforced by the cyclic intermediate's geometry. This mechanism avoids rearrangements common in HX additions and is highly stereospecific, even in non-polar solvents. Ring strain significantly enhances the rates of electrophilic additions in small cycloalkenes, as the transition state involves partial breaking of the strained C=C bond, providing a thermodynamic driving force. Notably, undergoes HBr addition significantly faster than , owing to substantial relief (over 200 kJ/mol total ring strain) that lowers the activation barrier for electrophilic attack. This heightened reactivity underscores the role of angle and torsional in dictating cycloalkene behavior under electrophilic conditions.

Other Reactions

Cycloalkenes undergo ring-opening metathesis (ROMP), a process that transforms strained cyclic monomers into linear polymers with repeating alkenyl units. This reaction is particularly effective for highly strained monomers like and cyclooctene, which polymerize under the action of metal catalysts, such as those developed by , to yield polyalkenamers with controlled molecular weights and low polydispersity. These polymers exhibit rubber-like properties due to their unsaturated backbones and have been produced industrially since the , with applications in elastomers and specialty materials. Ozonolysis provides a method for the oxidative cleavage of the cycloalkene , converting it into dicarbonyl compounds. For instance, treatment of with followed by reductive workup yields adipic dialdehyde (hexanedial), a versatile intermediate in for further derivatization into diols or dicarboxylic acids. This reaction proceeds via formation of a primary ozonide and subsequent Criegee intermediates, offering high selectivity under mild conditions and broad utility in preparing symmetrical carbonyl chains from cyclic precursors. Epoxidation of cycloalkenes occurs readily with peracids, such as (mCPBA), to form epoxycycloalkanes in a stereospecific manner that preserves the alkene's . The reaction of with mCPBA, for example, produces cyclohexene oxide quantitatively in aprotic solvents like , via a concerted mechanism involving electrophilic attack by the peracid oxygen. These epoxides serve as key intermediates in synthesis, enabling subsequent ring-opening reactions for or amino alcohol production. Recent advances in have highlighted the reactivity of strained trans-cycloalkenes, such as trans-cyclooctene, with tetrazines in inverse electron-demand Diels-Alder (IEDDA) cycloadditions. These reactions proceed rapidly and selectively in biological environments, with second-order rate constants exceeding 10^6 M^{-1} s^{-1}, due to the high strain relief in the trans-alkene dienophile. In 2024, such IEDDA pairings have been applied in pretargeted imaging modalities, including (PET), where trans-cyclooctene conjugates enable site-specific labeling of biomolecules for visualization of tumors and metabolic processes.

Synthesis

Ring-Closing Metathesis

Ring-closing metathesis (RCM) is a powerful reaction that constructs cycloalkenes by intramolecular coupling of terminal alkenes in precursors, typically releasing as a byproduct. This method enables the formation of cyclic alkenes from acyclic s under catalytic conditions, as illustrated by the general reaction: CH2=CH−(CH2)n−CH=CH2→ cycle−(CH2)n−CH=CH+CH2=CH2\mathrm{CH_2=CH-(CH_2)_n-CH=CH_2 \rightarrow \ cycle-(CH_2)_n-CH=CH + CH_2=CH_2} where nn determines the . The mechanism of RCM proceeds through a series of [2+2] cycloadditions and cycloreversions involving a metal carbene catalyst and the substrate alkenes, forming a transient metallacyclobutane intermediate. The catalyst initiates by coordinating to one alkene, followed by cycloaddition to generate a new metal carbene, which then reacts intramolecularly with the second alkene to close the ring and expel ethylene, driving the equilibrium forward due to the volatility of the byproduct. This Chauvin-type mechanism, established in the 1970s, underpins the efficiency of RCM for cycloalkene synthesis. Key catalysts for RCM include ruthenium-based systems developed by , such as the first-generation (a complex with ligands) and the more active second-generation variant incorporating N-heterocyclic (NHC) ligands for enhanced stability and reactivity. Molybdenum-based catalysts, pioneered by , offer high activity for certain substrates but are more sensitive to functional groups. These catalysts enable RCM at mild temperatures (often 20–60°C) in common solvents like . RCM is particularly effective for forming 5- to 30-membered cycloalkenes, with optimal efficiency for medium rings (5–12 members), where the reaction often produces mixtures of E and Z isomers depending on and substitution. For instance, 1,7-octadiene undergoes RCM to yield in high conversion, typically exceeding 90% yield under standard conditions with second-generation catalysts. Larger rings up to 30 members are accessible, though dilution techniques may be required to favor cyclization over oligomerization. Compared to traditional cyclization methods, RCM offers significant advantages, including tolerance for a wide array of functional groups (e.g., alcohols, esters, and halides) without the need for protection, and operation under mild, neutral conditions that minimize side reactions. These innovations, stemming from the development of well-defined metal catalysts, earned Yves Chauvin, , and the 2005 for .

Birch Reduction

The Birch reduction is a dissolving metal reduction method that transforms aromatic compounds into unconjugated 1,4-cycloalkadienes, providing an important synthetic pathway to six-membered cycloalkenes such as precursors for . Developed by Australian chemist Arthur J. Birch during his work at the , the reaction was first reported in 1944 and has since become a cornerstone of for partial dearomatization. The standard conditions employ alkali metals like sodium or dissolved in liquid (bp -33 °C) as the solvent and electron source, with an alcohol such as or tert-butanol serving as a proton donor to moderate the reaction and prevent over-reduction. The process involves the addition of two electrons and two protons to the arene, yielding a non-aromatic product while preserving two isolated double bonds. For , the reaction produces 1,4-cyclohexadiene in high yield, an unconjugated that maintains the ring size but disrupts . The overall transformation can be represented by the equation: \ceC6H6+2Na+2EtOH−>[liq.NH3]C6H8+2NaOEt\ce{C6H6 + 2 Na + 2 EtOH ->[liq. NH3] C6H8 + 2 NaOEt} where \ceC6H8\ce{C6H8} is 1,4-cyclohexadiene. The mechanism proceeds via sequential and steps to avoid rearomatization. Initially, a single from the metal adds to the arene, generating a with density primarily at the ortho and para positions. by the alcohol then occurs preferentially at the position of highest negative (meta for unsubstituted cases), forming a neutral pentadienyl radical. A second yields a pentadienyl dianion, followed by a final at the para position relative to the first, resulting in the stable 1,4-diene product where the double bonds are isolated to minimize electron repulsion. In substituted aromatics, the of is governed by the electronic effects of the , leading to specific isomers. Electron-donating groups (e.g., alkyl or alkoxy) stabilize the anion such that the resides on an sp³-hybridized carbon in the product, typically yielding a 2,5-cyclohexadiene derivative; for instance, gives 1-methoxycyclohexa-2,5-diene. Conversely, electron-withdrawing groups (e.g., ) direct the to an sp²-hybridized carbon in a 1,4-cyclohexadiene product, as seen in the conversion of to 1-carboxycyclohexa-1,4-diene (also known as 2,5-dihydrobenzoic acid). Despite its utility, the Birch reduction has limitations, including the potential for over-reduction to the fully saturated under prolonged reaction times or with excess metal, which diminishes yields of the desired . The reaction also requires conditions and careful control of temperature to prevent side reactions, and certain functional groups (e.g., conjugated alkenes) may undergo competing reductions. Further conversion of the resulting cycloalkadienes to monoalkenes can be achieved through selective or addition reactions.

Diels-Alder Reaction

The Diels-Alder reaction serves as a cornerstone [4+2] for constructing rings, enabling the efficient synthesis of cycloalkenes from conjugated s and alkenes as dienophiles. This pericyclic process forms two new carbon-carbon bonds in a single step, producing a substituted with predictable regiochemistry and , making it indispensable for building complex carbocyclic frameworks. The reaction proceeds through a concerted mechanism, where the diene and dienophile approach in a suprafacial manner, preserving the of the reactants in the product. This arises from the synchronous formation of bonds via overlap of the diene's and the dienophile's LUMO, with an inherent preference for the endo transition state when the dienophile bears electron-withdrawing groups, as dictated by the Alder endo rule. The diene requires an s-cis conformation for effective orbital alignment, while the dienophile is most reactive when electron-poor, such as acrylates or , which lower the LUMO energy and accelerate the . A prototypical example is the cycloaddition of 1,3-butadiene with , yielding : \ceCH2=CH−CH=CH2+CH2=CH2−>[heat]C6H10\ce{CH2=CH-CH=CH2 + CH2=CH2 ->[heat] C6H10} This reaction typically requires elevated temperatures or pressure due to the unactivated nature of ethylene, but yields can reach 70–100% with electron-deficient dienophiles or , such as AlCl₃, which coordinates to the dienophile and further lowers its LUMO. The Diels-Alder reaction's stereocontrol facilitates its widespread use in synthesis, where it establishes multiple contiguous stereocenters in a single operation, as seen in the assembly of polycyclic terpenoids and alkaloids. Inverse electron-demand variants, involving electron-poor dienes like tetrazines and electron-rich dienophiles, offer complementary reactivity for bioorthogonal labeling and rapid fragment assembly in complex syntheses.

Cyclization Reactions

Cyclization reactions represent a key class of synthetic methods for constructing cycloalkene rings through intramolecular bond formation, enabling the efficient assembly of five- to eight-membered rings with a single carbon-carbon . These approaches, distinct from pericyclic or metathesis-based strategies, often leverage radical or acid-mediated pathways to achieve high and tolerance. Radical cyclizations, initiated by halogen abstraction, provide a versatile route to cycloalkenes, particularly via the 5-exo-trig mode. In a typical procedure, alkyl halides bearing a pendant are treated with (Bu₃SnH) and (AIBN) under in , generating a carbon-centered radical that rapidly cyclizes. This follows the Beckwith-Houk model, favoring five-membered rings due to favorable geometry and lower barriers (approximately 3-5 kcal/mol). Carbonyl-based cyclizations, such as the Nazarov reaction, offer an acid-catalyzed pathway for synthesizing cyclopentenones, which can be further elaborated to simple cycloalkenes. Divinyl ketones, activated by protic or Lewis acids like or BF₃·OEt₂, undergo electrocyclization followed by proton transfer and elimination to yield 2-cyclopentenones. Seminal work demonstrated this transformation with substrates like 1,5-diphenylpenta-1,4-dien-3-one, affording the corresponding cyclopentenone in moderate to good yields (50-90%) under ethanolic HCl conditions. Modern variants employ chiral Lewis acids for asymmetric induction, enhancing selectivity for enantioenriched products. An illustrative example of larger-ring formation is the nickel-catalyzed tetramerization of to , a polyene that serves as a precursor for monoalkene derivatives through selective ; this process achieves up to 90% yield under high-pressure conditions. Overall, these cyclizations exhibit high efficiency for five- and six-membered rings (yields >70%, selectivity >95:5 /endo), but efficiency diminishes for larger rings due to entropic penalties, with rates dropping by orders of magnitude (e.g., 10⁵ s⁻¹ for 5- vs. 10² s⁻¹ for 8-). Strain relief in the resulting cycloalkenes contributes to the thermodynamic favorability of smaller rings.

Electrocyclic Reactions

Electrocyclic reactions represent a class of pericyclic processes that enable the formation of cycloalkenes through the concerted cyclization of conjugated polyenes, governed by strict stereochemical rules derived from orbital symmetry considerations. These reactions involve the formation of a new σ-bond between the termini of a π-system, resulting in ring closure, and are particularly relevant for synthesizing strained or medium-sized cycloalkenes. The stereochemistry of these transformations—either conrotatory (where the terminal substituents rotate in the same direction) or disrotatory (opposite directions)—is predicted by the Woodward-Hoffmann rules, which ensure conservation of orbital symmetry during the reaction. Under thermal conditions, electrocyclic ring closures involving 4n π electrons proceed via a conrotatory motion, while those with 4n+2 π electrons favor disrotatory motion. For instance, the thermal cyclization of (4π electrons) to cyclobutene occurs conrotatorily, though this reaction is rare in practice due to the high in the product. In contrast, systems with 6 π electrons, such as (Z)-1,3,5-hexatriene, undergo thermal ring closure to 1,3-cyclohexadiene via disrotatory rotation, providing a more accessible route to six-membered cycloalkenes. This process is reversible under equilibrating conditions, allowing interconversion between the open-chain triene and the cyclic . Photochemical excitation inverts these stereochemical preferences: 4n π systems become disrotatory, and 4n+2 systems conrotatory. This complementarity enables selective access to different stereoisomers of cycloalkenes. For larger systems, photochemical variants are often reversible, facilitating dynamic equilibria that are exploited in synthesis. A notable application occurs in biosynthesis, where studies of previtamin D interconversions highlight electrocyclic ring closures of hexatriene moieties to cyclohexadienes, demonstrating the reaction's role in assembly. The thermal disrotatory closure of (Z)-1,3,5-hexatriene exemplifies these principles: (Z)-1,3,5-hexatriene →Δ,disrotatory\xrightarrow{\Delta, \text{disrotatory}}
Add your contribution
Related Hubs
User Avatar
No comments yet.