Hubbry Logo
Weather balloonWeather balloonMain
Open search
Weather balloon
Community hub
Weather balloon
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Weather balloon
Weather balloon
Weather balloon
View on Wikipedia
from Wikipedia

Transosonde ready for release
Picture taken at approximately 30 km above Oregon using a 1,500 gram weather balloon
Rawinsonde weather balloon just after launch. Notice a parachute in the center of the string and a small instrument box at the end. After release it measures many parameters. These include temperature, relative humidity, pressure, and wind speed and wind direction. This information is transmitted back to surface observers.

A weather balloon, also known as a sounding balloon, is a balloon (specifically a type of high-altitude balloon) that carries instruments to the stratosphere to send back information on atmospheric pressure, temperature, humidity and wind speed by means of a small, expendable measuring device called a radiosonde. To obtain wind data, they can be tracked by radar, radio direction finding, or navigation systems (such as the satellite-based Global Positioning System, GPS). Balloons meant to stay at a constant altitude for long periods of time are known as transosondes. Weather balloons that do not carry an instrument pack are used to determine upper-level winds and the height of cloud layers. For such balloons, a theodolite or total station is used to track the balloon's azimuth and elevation, which are then converted to estimated wind speed and direction and/or cloud height, as applicable.

Weather balloons are launched around the world for observations used to diagnose current conditions as well as by human forecasters and computer models for weather forecasting. Between 900 and 1,300 locations around the globe do routine releases, typically two or four times daily.[1][2][3][4]

History

[edit]

One of the first people to use weather balloons was the French meteorologist Léon Teisserenc de Bort. Starting in 1896 he launched hundreds of weather balloons from his observatory in Trappes, France. These experiments led to his discovery of the tropopause and stratosphere.[5] Transosondes, weather balloons with instrumentation meant to stay at a constant altitude for long periods of time to help diagnose radioactive debris from atomic fallout, were experimented with in 1958.[6] The drone technology boom has led to the development of weather drones since the late 1990s.[7] These may begin to replace balloons as a more specific means for carrying radiosondes.[8]

Materials and equipment

[edit]

The balloon itself produces the lift, and is usually made of a highly flexible latex material, though chloroprene may also be used. The unit that performs the actual measurements and radio transmissions hangs at the lower end of the string, and is called a radiosonde. Specialized radiosondes are used for measuring particular parameters, such as determining the ozone concentration.

The balloon is usually filled with hydrogen, though helium – a more expensive, but viable option nonetheless – is also frequently used. The ascent rate can be controlled by the amount of gas with which the balloon is filled, usually at around 300 metres per minute (980 ft/min).[9]: 24–54  Weather balloons may reach altitudes of 40 km (25 mi) or more, limited by diminishing pressures causing the balloon to expand to such a degree (typically by a 100:1 factor) that it disintegrates. In this instance the instrument package is usually lost,[10] although a parachute may be employed to help in allowing retrieval of the instrument. Above that altitude sounding rockets are used to carry instruments aloft, and for even higher altitudes satellites are used.

Launch time, location, and uses

[edit]
A hydrogen filled balloon at Cambridge Bay Upper Air station, Nunavut, Canada
Launch of wiki payload into stratosphere

Weather balloons are launched around the world for observations used to diagnose current conditions as well as by human forecasters and computer models for weather forecasting. Between 900 and 1,300 locations around the globe do routine releases, two or four times daily, usually at 0000 UTC and 1200 UTC.[1][2][3][4] Some facilities will also do occasional supplementary special releases when meteorologists determine there is a need for additional data between the 12-hour routine launches in which time much can change in the atmosphere. Military and civilian government meteorological agencies such as the National Weather Service in the US typically launch balloons, and by international agreements, almost all the data are shared with all nations.

Specialized uses also exist, such as for aviation interests, pollution monitoring, photography or videography, and research. Examples include pilot balloons (Pibal). Field research programs often use mobile launchers from land vehicles as well as ships and aircraft (usually dropsondes in this case). In recent years, weather balloons have also been used for scattering human ashes at high altitudes. The weather balloon was also used to create the fictional entity 'Rover' during the production of the 1960s TV series The Prisoner in Portmeirion, Gwynedd, North Wales, UK in September 1966. This was retained in further scenes shot at MGM Borehamwood UK during 1966–67.[11]

Potential issues

[edit]

Aviation

[edit]

In 1970, an Antonov 24 operating Aeroflot Flight 1661 suffered a loss of control after striking a radiosonde in flight resulting in the death of all 45 people on board. On 16 October 2025,[12] a United Airlines flight collided with a weather balloon at cruising altitude over Utah, fracturing its windshield, releasing shards of glass into the cockpit[13] that injured the captain's right arm, and causing an emergency descent[14] and diversion. The NTSB has begun an investigation, and the company behind the weather balloon has taken measures to reduce future risk.[13] There are also other ways in which weather balloons can pose a danger to aircraft, such as interfering with the pitot-static systems.[15]

Environmental issues

[edit]

While weather forecasting is increasingly reliant on satellites and radar technology, it still heavily involves the use of weather balloons. These devices, launched from thousands of stations worldwide, ascend into the atmosphere to collect meteorological data. The United States, for example, releases approximately 76,600 balloons annually (an average of around 210 per day), while Canada launches 22,000.[16]

Weather balloons, after reaching an altitude of approximately 35 kilometers, burst, releasing their instruments and the latex material they are made of. While the instruments are often recovered, the latex remains in the environment, posing a significant threat to marine ecosystems. Studies have shown that a substantial portion of weather balloons eventually end up in the ocean. For instance, one Australian researcher collected over 2,460 pieces of weather balloon debris from the Great Barrier Reef, estimating that up to 300 balloons per week may be released into the marine environment. This environmental impact underscores the need for sustainable alternatives in weather data collection.[16]

Scientists and environmentalists have raised concerns about weather balloons' environmental impact. The latex material, which can persist in the ocean for extended periods, can harm marine life, including sea turtles, birds, and fish. Efforts to minimize the environmental impact of weather balloons include developing biodegradable materials and improved recovery methods. However, the continued reliance on weather balloons for meteorological data challenges balancing the need for accurate weather forecasts with environmental sustainability.[16]

See also

[edit]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Weather balloon

View on Grokipedia
from Grokipedia
A weather balloon is a balloon, typically constructed from latex and inflated with helium or hydrogen gas, that carries a radiosonde—a compact instrument package suspended beneath it—to gather upper-atmosphere data such as temperature, humidity, pressure, and wind velocity. These devices ascend rapidly, often reaching altitudes above 100,000 feet (30 kilometers) within two hours, where the balloon expands until it ruptures, allowing the radiosonde to descend by parachute for potential recovery. Launched twice daily at standardized universal times from approximately 800 to 1,000 ground stations worldwide, weather balloons supply indispensable empirical measurements for initializing weather forecast models, calibrating satellite observations, and tracking long-term atmospheric trends. The operational use of weather balloons traces back to early 20th-century advancements in and , evolving from rudimentary pilot balloons and kite-based soundings to automated radiosondes by , which enabled routine of data from the into the . This shift provided meteorologists with direct, vertically resolved profiles of atmospheric conditions, fundamentally improving predictive accuracy over surface-only observations and facilitating applications in , severe , and research. Despite their simplicity and low cost, weather balloons remain a cornerstone of global observing systems, complementing technologies while offering high-fidelity in-situ validation amid ongoing challenges like instrument recovery rates and data gaps in remote regions.

Fundamentals

Definition and Purpose

A weather balloon is a balloon filled with or that carries a , a battery-powered instrument package equipped with sensors for measuring , , and relative , as well as GPS for determining and direction. The balloon ascends rapidly due to its low compared to surrounding air, expanding as external decreases until it bursts at altitudes typically exceeding feet (30 kilometers), after which the radiosonde parachutes to the ground while transmitting data. The primary purpose of weather balloons is to collect high-resolution vertical profiles of the atmosphere, enabling meteorologists to monitor conditions above the surface layer where ground-based instruments cannot reach. This is transmitted in real-time every second to ground stations, providing inputs for models that forecast phenomena such as storm tracks, precipitation, and temperature changes. Such observations are indispensable for improving forecast accuracy, particularly for events, routing, and marine safety. Globally standardized launches occur twice daily at 0000 UTC and 1200 UTC from approximately 1,300 sites, including 92 operated by the , ensuring consistent coverage for synoptic-scale analysis and research. Weather balloons also aid in monitoring by contributing long-term datasets and validating from satellites, remaining the benchmark for direct upper-air measurements due to their reliability and precision.

Underlying Physical Principles

Weather balloons ascend primarily due to buoyancy, as described by Archimedes' principle, which states that an object immersed in a fluid experiences an upward force equal to the weight of the fluid displaced. The balloon envelope is filled with a lifting gas such as helium (density approximately 0.178 kg/m³ at standard temperature and pressure) or hydrogen (density approximately 0.0899 kg/m³), both significantly less dense than ambient air (density approximately 1.225 kg/m³ at sea level). This density differential ensures that the total mass of the balloon system—including the latex envelope, gas, and instrument payload—is less than the mass of the displaced air, generating net positive lift. The ascent begins upon release, with the balloon rising at an average rate of about 5 meters per second under typical conditions, driven by the excess force overcoming gravitational weight and aerodynamic drag. Atmospheric density decreases with altitude, reducing drag and allowing the balloon to accelerate initially before stabilizing, while the (such as a ) remains suspended below via a . The is influenced by , causing horizontal drift that can exceed 200 kilometers over the full flight. As the balloon ascends, external atmospheric pressure drops—roughly halving every 5-6 kilometers in the troposphere—while the internal gas pressure equilibrates closely with the external due to the elastic envelope. This pressure reduction causes the contained gas to expand in volume, approximately following Boyle's law (PV = constant at constant temperature), though adiabatic cooling during ascent introduces deviations./14:_The_Behavior_of_Gases/14.03:_Boyle's_Law) The latex balloon, initially about 1.5 meters in diameter, expands to 6-8 meters before the envelope reaches its tensile limit and bursts, typically at altitudes of 30-35 kilometers where pressure is about 1% of sea level value. The radiosonde then descends under a parachute for recovery.

Historical Development

Origins and Early Experiments

The development of weather balloons originated from the invention of lighter-than-air aircraft in the late , initially adapted for meteorological observations through manned ascents. In , hot air balloons were pioneered by Joseph-Michel and Étienne Montgolfier, with their first public demonstration on June 5, 1783, using a filled with heated air from burning straw and wool. Hydrogen balloons soon followed, enabling higher altitudes; and Nicolas-Louis Robert launched the first such unmanned hydrogen on August 27, 1783, reaching approximately 3,000 meters. Early experiments involved equipping these balloons with basic instruments like barometers, thermometers, and hygrometers for manned flights, allowing scientists such as John Jeffries and Jean-Pierre Blanchard to record and variations during ascents in the 1780s, though data recovery relied on pilot survival and recollection. Manned balloon flights persisted into the 19th century for upper-air soundings but faced inherent risks, including hypoxia, extreme cold, and equipment failure, limiting systematic data collection to altitudes below 10 kilometers in most cases. This prompted the pursuit of unmanned alternatives, with initial experiments using kites for instrument carriage in the mid-1800s, such as those by William Henry Leet in Britain around 1850 to measure lapse rates. Transition to unmanned balloons accelerated in the late 19th century, driven by advances in lightweight recording devices known as meteorographs, which could capture , , and on rotating drums without human intervention. The first instrumented unmanned free balloon for meteorological purposes was launched in 1892 by French engineer Gustave Hermite and geophysicist Arthur-Louis Berson (though primarily credited to Hermite), employing a waxed-paper envelope inflated with (primarily and ) to carry a meteorograph and ballast system for controlled ascent. This design allowed recovery of instruments via after burst, marking a shift from manned risks to repeatable, higher-altitude profiling up to 10-15 kilometers. Concurrently, the U.S. Bureau initiated small unmanned launches in 1892 with similar recording instruments, while in , systematic programs emerged; notably, Léon Teisserenc de Bort conducted over 236 launches starting in 1896 from his Trappes observatory, using varnished silk or paper s filled with to reach altitudes exceeding 14 kilometers, revealing a temperature inversion layer between 11-15 kilometers that he termed the "isothermal layer" (later recognized as the lower base). These experiments provided of upper-air stability, challenging prior assumptions of uniform temperature decline and enabling foundational models of . Early unmanned balloons typically used zero-pressure designs with open vents to avoid superpressure risks, filled on-site with generated from iron filings and , achieving ascent rates of 5-10 meters per second depending on mass (often 1-5 kilograms including instruments). Recovery rates varied from 50-80% due to drift and , but the yielded precise vertical profiles, such as Teisserenc de Bort's observations of temperatures stabilizing around -55°C above 11 kilometers, corroborated by independent German flights under Berson reaching 20 kilometers by 1894. These efforts laid the groundwork for global upper-air networks, though pre-radio transmission reliance on mechanical recorders introduced uncertainties from instrument calibration and balloon burst variability.

Integration of Instrumentation

The integration of instrumentation into weather balloons began in the late 19th century with the attachment of mechanical meteorographs to unmanned rubber balloons, which recorded atmospheric variables such as , , and on rotating drums or smoked paper during ascent and descent. These devices, typically weighing a few kilograms, were suspended below the balloon via lightweight tethers to minimize drag, with parachutes added for controlled recovery after the balloon burst at altitude; successful retrieval rates improved but were limited by unpredictable landing sites and instrument fragility. French meteorologist Léon Teisserenc de Bort pioneered routine launches of such instrumented balloons starting in 1896, enabling the discovery of the through data from altitudes exceeding 10 km. By the early 20th century, refinements included smaller, more robust meteorographs integrated with pilot balloons for wind tracking via theodolites, but reliance on physical recovery persisted until radio telemetry emerged. In the late 1920s, experimenters began suspending crude radio transmitters from free balloons to relay basic signals, marking the transition to wireless data transmission. The first operational radiosondes—compact packages combining sensors, oscillators, and antennas—were integrated in the early 1930s, transmitting modulated signals encoding temperature, pressure, and humidity in real time as the balloon ascended to 20-30 km. These systems, often using vacuum tubes and batteries, were attached via non-conductive lines to avoid interference, with ground receivers decoding tones or pulses; early models weighed under 1 kg, allowing launches from portable sites. The U.S. Weather Bureau formalized integration by 1937, establishing a national network where standardized packages were suspended from helium- or hydrogen-filled balloons calibrated for predictable ascent rates of 5-6 m/s. demands accelerated hybrid rawinsondes, incorporating or radio-theodolite tracking for data by triangulating the radiosonde's position every few seconds during flight. This integration reduced dependency on recovery, enabling twice-daily global observations, though challenges like signal interference from persisted until post-war electronic improvements, such as oscillators for stability, enhanced reliability. By the , automated radio-theodolites streamlined , solidifying radiosondes as the core for upper-air profiling.

Standardization and Global Adoption

The development of standardized weather balloon protocols emerged in the 1930s through national efforts, such as the U.S. National Bureau of Standards' creation of compact radio packages for balloon ascents, enabling consistent measurement of atmospheric variables like and . These advancements built on earlier European experiments with unmanned balloons in the late 19th and early 20th centuries, but lacked uniformity until technology matured, incorporating battery-powered sensors that transmitted data via radio signals during flights reaching up to 30-40 km altitudes. Post-World War II, the (WMO), founded in 1950 as a specialized UN agency, facilitated global standardization by establishing guidelines for upper-air observations, including balloon types, launch schedules, and data encoding for international exchange. By the through , meteorological agencies worldwide adopted these protocols, transitioning from disparate national systems to interoperable formats that supported , forecasting models, and climate monitoring. WMO intercomparisons of systems, such as those conducted since the late , verified performance across vendors, ensuring measurement accuracy within tolerances like ±0.2°C for and ±1 hPa for pressure at standard levels. Global adoption accelerated with the integration of radiosondes into the WMO Global Observing System (GOS), which now coordinates approximately 800 to 1,300 upper-air stations performing twice-daily launches at 00:00 and 12:00 UTC, providing essential data on , , and for . This network, formalized through codes for data dissemination since the mid-20th century, has sustained operational consistency despite regional variations in balloon materials (e.g., latex envelopes filled with or ) and sensor types, with over 2,800 historical stations archived in datasets like the Integrated Global Radiosonde Archive. Such standardization has proven resilient, underpinning global models even as satellite observations complement but do not fully replace balloon-derived profiles due to their direct in-situ precision.

Design and Components

Balloon Envelope and Materials

The envelope of a weather balloon, also known as the balloon proper, consists of a thin, elastic membrane designed to contain such as or while expanding under reduced during ascent. Standard meteorological balloons employ as the primary material, sourced from trees and processed into a uniform film that balances lightweight construction with sufficient tensile strength to reach altitudes exceeding 30 kilometers before bursting. This composition adheres to international specifications requiring minimum burst diameters and ascent rates, ensuring reliability in upper-air soundings. Latex envelopes are produced via , where liquid is applied to a rotating mold to form a multilayered of consistent thickness, typically around 30 micrometers, which minimizes weight variations and enhances uniformity in expansion behavior. Balloon sizes, denoted by weight (e.g., 600 grams for Totex TA600 models), differ primarily in the quantity of latex used rather than film thickness, allowing for payloads from 0.5 to 2 kilograms while maintaining similar material properties like elasticity and gas impermeability. Alternative materials, such as rubber () compounded with , have been developed for improved resistance and longevity in prolonged exposures, though natural remains predominant due to its cost-effectiveness and biodegradability post-burst. These envelopes exhibit high elongation at break—often exceeding 700%—enabling volume expansion from under 5 cubic at launch to over 200 cubic at peak altitude, driven by the material's viscoelastic response to gradients. Manufacturers like Totex ensure compliance through testing for defects, with variants offering marginally higher durability against environmental stressors like UV radiation.

Radiosonde and Payload Instruments

The serves as the core instrument on meteorological balloons, consisting of a compact package of sensors, , and a transmitter designed to acquire and upper-air in real time. Suspended beneath the via a lightweight tether, it ascends through the and , typically reaching altitudes of up to 35 km (115,000 feet) before the bursts, after which a facilitates descent. The device operates autonomously for 2 to 3 hours, powered by a small lithium battery, and transmits measurements at intervals of 1 to 2 seconds to ground receiving stations. Key sensors focus on , , and relative humidity (collectively termed PTU measurements), which form the foundational dataset for atmospheric profiling. is gauged using a resistive wire or , offering stability across a range from surface-level conditions to -90°C (-130°F) or below, with response times under 0.4 seconds to minimize lag errors during rapid ascents. Relative humidity employs capacitive thin-film sensors or heated hygristors, calibrated to detect content with accuracies of ±2-5% in the lower atmosphere, though performance degrades in extreme cold or contaminated conditions due to sensor icing or . , historically measured via aneroid capsules, is now often derived from GPS-derived using hydrostatic integration, achieving resolutions of 0.1 hPa or better; direct barocapacitive sensors provide redundancy in some models. Wind parameters—speed and direction—are computed from the radiosonde's tracked , primarily via an integrated GPS receiver operating on L1 (1575.42 MHz) with code-correlating signals for positioning accuracy within 10-20 meters horizontally. This enables derivation of horizontal through successive position fixes, supplementing traditional rawinsonde or tracking. The electronics module processes analog signals via a 24-bit , encodes data into digital formats (e.g., phase-modulated VHF or UHF signals), and broadcasts over ranges up to 350 km line-of-sight, depending on and terrain. Modern radiosondes, such as the Vaisala RS41 series, weigh approximately 110 grams (including packaging) and incorporate protective booms for sensors to reduce airflow interference, alongside automated ground-check circuits for pre-launch verification of battery voltage, sensor functionality, and humidity reconditioning. While standard payloads prioritize PTU and wind data for operational meteorology, auxiliary instruments like ozonesondes or radiation detectors can be co-manifested for specialized missions, though these increase mass and complexity without altering core radiosonde architecture. Overall, the system's design emphasizes low cost (under $100 per unit in bulk), disposability, and reliability under harsh conditions, with global standardization driven by World Meteorological Organization guidelines to ensure data interoperability.

Launch Accessories

Launch accessories for weather balloons primarily encompass the equipment required for inflating the balloon envelope, verifying instrument functionality prior to ascent, and facilitating controlled release to achieve a standard ascent rate of approximately 5 meters per second (1,000 feet per minute). These components ensure operational safety, prevent equipment damage, and maintain data accuracy during the initial phases of flight, as unmanaged inflation or release can lead to premature balloon rupture or sensor contamination. In operational settings like those of the (NWS), launches occur twice daily using to minimize fire risks associated with , with inflation conducted in ventilated enclosures to handle gas expansion. Inflation systems form the core of launch preparation and typically include compressed gas cylinders ( in U.S. operations, in some international contexts), regulators such as CGA-580 adapters, high-pressure hoses (often 25 feet long), and specialized with clamps to secure the balloon neck. A filling balance or digital scale, like the FB13, measures buoyant lift during inflation to calibrate the gas volume—usually until the balloon just lifts the —preventing over- or under-inflation that could alter or cause early failure. Flexible hoses connect the cylinder to the , with procedures emphasizing slow gas release to avoid stresses on the latex envelope, and protective gloves are standard to handle potential leaks or cold gas effects. Pre-launch diagnostic tools, such as ground check devices (e.g., MWH322), interface with the to validate sensor readings for , , , and GPS prior to attachment, ensuring the transmits reliable from the outset. These units automate and outdoor preparation in protective packaging to shield sensors from contaminants. Tethers, often cotton twine or stronger lines, connect the inflated balloon to the and , with lengths calibrated to avoid drag interference during ascent. Release aids include string unwinders—devices dispensing non-UV treated line (e.g., 55 meters long, <115 N tenacity)—to manage initial deployment without tangling, hooked through the neck loop and aligned for downward orientation during hand-held or roof-top launches common in NWS protocols. Optional semi-automatic inflation or release systems, available from manufacturers like Meteomodem, streamline operations in high-volume sites by automating gas flow cutoff and detachment, though manual methods predominate for precision control. These accessories collectively support global , with costs per launch around $200 in U.S. networks encompassing 92 North American stations.

Operational Aspects

Preparation and Launch Protocols

Preparation of a weather balloon for meteorological observations begins approximately one hour prior to the scheduled launch time, which occurs twice daily at coordinated universal times of 00Z and 12Z under World Meteorological Organization (WMO) guidelines to ensure global data consistency. The , the primary instrument payload measuring , temperature, , , and direction, undergoes initial checks including deployment, battery connection, and a 10- to 15-minute baseline calibration to verify functionality and data transmission via radio to a ground receiving station. GPS acquisition is confirmed, and any anomalies in signal or sensor readings are addressed to maintain data accuracy during ascent. The balloon envelope, typically constructed from latex for its elasticity and predictable expansion, is inflated with either helium or hydrogen gas to achieve a targeted free lift of 1,100 to 1,600 grams, corresponding to an initial ascent rate of approximately 5 per second. Inflation volume is calculated based on payload weight (around 500–1,000 grams including the and ) and environmental factors such as or , with the balloon reaching about 5 feet (1.5 ) in at launch; hydrogen provides greater lift per volume but poses flammability risks, while helium is safer though more expensive. Gas is metered precisely using a regulator and secured to the balloon neck with tape to prevent leaks, ensuring the system achieves the desired without over-inflation that could cause premature rupture. Assembly involves attaching the inflated to 75–100 feet (23–30 meters) of lightweight or line, followed by a bright orange for controlled descent after balloon burst, and finally the secured at the bottom to minimize interference with sensors. All connections are reinforced with zip ties or to withstand launch stresses. Near airports or in , operators coordinate with () air for clearance, issuing notices at least 30 minutes prior and adhering to unmanned free flight protocols to avoid hazards. Launch entails manually releasing the balloon assembly from a clear ground site, allowing it to ascend vertically under its while transmitting real-time ; the process is monitored via ground equipment for immediate , with the expanding to 20–25 feet (6–8 meters) in diameter before bursting at 95,000–115,000 feet (29–35 km). While manual launches remain standard, automated systems from manufacturers like are increasingly used for consistency in remote or high-frequency operations, though they require similar pre-flight verifications. Post-release, the deploys automatically, and the descends for potential recovery, often including a return-addressed container.

Flight Dynamics and Trajectory

The ascent of a weather balloon is driven by the buoyant force generated by the difference between the density of the displaced atmospheric air and the combined density of the lifting gas (typically helium), balloon envelope, and payload. This force propels the system upward against gravity and aerodynamic drag, with the envelope's expansion due to decreasing ambient pressure enhancing buoyancy over time. Standard radiosonde balloons are inflated to achieve an initial ascent rate of approximately 250 to 350 meters per minute (4 to 6 meters per second), which is calibrated to optimize data sampling resolution during the roughly two-hour flight. Variations in this rate occur due to factors such as balloon volume, gas fill amount, payload mass (typically 1-2 kg for radiosondes), and local atmospheric density, with rates stabilizing around 5 m/s above 3 km altitude under typical conditions. The vertical trajectory follows a near-parabolic profile in the absence of strong vertical , accelerating initially as the balloon sheds lower-density air constraints, then decelerating near burst altitude due to thinning air and maximal expansion. Burst occurs when the latex reaches its elastic limit, generally at 29 to 35 km (95,000 to 115,000 feet), corresponding to pressures of 9 to 13 millibars, after which the descends via at 4 to 5 m/s. Maximum altitude is influenced by free lift (excess at launch, often 20-30% of total lift), tensile strength (up to 200-800 g payload capacity for standard sizes), and environmental temperature, which affects gas expansion; colder stratospheric conditions can extend float durations briefly before rupture. Horizontally, the trajectory is passively advected by , with the balloon sampling shear layers—such as jet streams at 10-12 km—resulting in cumulative drifts of 100 to several hundred kilometers from the launch site, depending on ascent duration and wind profiles. Global analyses of over 400 stations indicate mean drifts of 50-150 km in mid-latitudes, with extremes exceeding 300 km in strong shear events, as the position at each level integrates horizontal wind components reported via GPS or tracked /. Predictive models employ (e.g., Runge-Kutta methods) of forecast winds along assumed constant ascent rates to forecast zones, though actual paths deviate due to unresolved mesoscale winds or balloon drag variations. Key influencing factors include tropospheric (up to 50-100 m/s in jets), Coriolis effects over long drifts, and minor canopy drag, which imparts slight leeward bias but negligible steering compared to buoyancy-driven vertical motion. Post-burst descent trajectories further disperse under lower-altitude winds, complicating recovery but providing bidirectional profiling in some systems.

Data Acquisition and Post-Flight Recovery

Data acquisition from weather balloons occurs via radiosondes, compact instrument packages that measure atmospheric parameters such as , , relative , and and direction using integrated sensors including thermistors, barometers, hygrometers, and GPS receivers. These measurements are sampled at 1-2 second intervals and transmitted in real-time via VHF or UHF radio to ground-based receiving stations, enabling immediate processing for meteorological analysis. Transmission employs frequency-modulated signals on bands such as 403 MHz or 1680 MHz, with modern GPS-enabled systems like the National Weather Service's Rapid Refresh (RRS) providing precise positioning and data over ranges up to 250 km or more, depending on antenna elevation and . Ground systems, including receiving systems (TRS) with directional antennas, lock onto the signal shortly after launch, verifying before full ascent. Battery life supports flights up to 135 minutes, ensuring coverage through the and into the lower . Upon reaching peak altitudes of 30-35 km, where causes the latex balloon envelope to expand and burst, a small parachute deploys automatically from the train, moderating descent speed to 3.6-10 m/s to minimize risks to life and property upon ground impact. The may continue during parachute descent until battery depletion, potentially yielding supplementary data on and other variables, though such observations are often degraded by parachute-induced , , and non-representative sampling paths, limiting their routine operational use. Post-flight recovery is not systematically pursued for standard operational launches due to variable landing zones influenced by upper-level winds, which can displace payloads 100-200 km from launch sites. Radiosondes include return instructions, prepaid mailing labels, and durable packaging to facilitate public submission to the or NOAA's National Reconditioning Center. Approximately 20% of the roughly 75,000 U.S. launches per year are recovered this way, allowing reconditioning and reuse of serviceable components to offset procurement costs. Finders are directed to deflate and discard remnants and (to prevent hazards), handle the intact instrument package safely, and mail it without disassembly, as residual or poses no ongoing risk post-flight.

Applications and Impacts

Meteorological Forecasting

Weather balloons carrying radiosondes deliver essential vertical profiles of atmospheric variables, forming a cornerstone of meteorological forecasting by supplying direct measurements of pressure, temperature, humidity, and winds aloft. These observations span from the surface to altitudes exceeding 30 kilometers, capturing data critical for assessing atmospheric stability, moisture distribution, and jet stream dynamics that influence weather patterns. The World Meteorological Organization's Global Observing System coordinates a network of approximately 1,000 upper-air stations, with launches conducted twice daily at 00Z and 12Z UTC, generating around 2,000 soundings worldwide each day. alone, the deploys radiosondes from 92 fixed sites at these standard synoptic times, supplemented by occasional special launches during events. This routine cadence ensures timely data ingestion into forecasting workflows, supporting both regional and global analyses. In (NWP), data undergoes assimilation into models via techniques that optimally combine observations with prior forecasts, refining initial conditions and mitigating error growth over time. This process enhances short- to medium-range forecast skill, particularly in the upper where retrievals may require validation to correct instrumental biases. Studies indicate that accounting for drift during ascent improves assimilation accuracy, reducing forecast errors in wind and fields. Beyond model initialization, profiles inform manual forecasting by revealing indices like (CAPE) and tropopause folds, aiding predictions of thunderstorms, cyclones, and frontal systems. They also calibrate indirect observations from satellites and , maintaining the integrity of blended datasets used in operational centers. As a longstanding in-situ reference since the mid-20th century, radiosondes remain indispensable despite advances in , providing high-vertical-resolution data unmatched for certain thermodynamic parameters.

Scientific Research and Calibration

Weather balloons support atmospheric research by providing in-situ measurements of , , , and up to altitudes of approximately 30-40 kilometers, enabling studies of stratospheric dynamics, distribution, and radiative processes. The Integrated Global Radiosonde Archive (IGRA), maintained by NOAA's National Centers for Environmental Information, compiles data from over 2,800 stations dating back to 1905, serving as a foundational for variability analyses and model validation. In targeted campaigns, such as those investigating concentrations or impacts, balloons equipped with additional sensors yield high-resolution vertical profiles critical for understanding atmospheric composition changes. Controlled ascent and descent techniques enhance precision by allowing repeated sampling at fixed altitudes, reducing uncertainties in time-series data for phenomena like long-term temperature trends. These methods, demonstrated in studies from onward, facilitate Lagrangian air mass tracking and direct comparisons with remote sensing instruments, improving calibration of satellite retrievals for and trace gases. High-altitude flights also support interdisciplinary efforts, such as NASA's suborbital experiments exposing biological samples to stratospheric radiation levels equivalent to Mars surface conditions, reaching above 99% of Earth's atmosphere in 1-4 hours. Radiosonde calibration ensures measurement accuracy for research applications, involving pre-launch ground checks against traceable standards for temperature and pressure sensors, as standardized in facilities like those in since 2015. sensors, prone to low-temperature biases, are tested in specialized chambers simulating upper-air conditions down to -80°C and low pressures, correcting capacitance-to-relative-humidity relations per manufacturer protocols like RS92. Post-flight validations, including comparisons with , quantify and mitigate systematic errors, such as temperature biases up to 1-2 K, enhancing reliability for long-term scientific archives. These procedures underpin the use of as reference truths for calibrating lidars and instruments in atmospheric profiling.

Military and Auxiliary Uses

Weather balloons, equipped with radiosondes, serve critical meteorological functions in military operations by providing real-time upper-air essential for mission planning, , and weapons accuracy. These launches measure parameters such as , , , , , and direction up to altitudes of approximately 60,000 feet (18 km), enabling predictions of atmospheric conditions that affect performance, ballistic trajectories, and risks. In units, such as the U.S. Army's 13T Field Artillery Surveyor/Meteorological Crewmembers, personnel prepare and launch balloons to generate messages that correct for drift and variations, improving accuracy over distances exceeding 30 kilometers. Historically, military adoption of radiosonde-equipped balloons dates to , with the U.S. Navy commissioning development by the National Bureau of Standards in 1936, leading to operational use by 1938 for naval forecasting needs. During and subsequent conflicts, these systems supported tactical decisions by supplying data unattainable from surface observations alone, such as vertical wind profiles for anti-aircraft gunnery and troop movements. Modern military variants, often on dedicated frequencies like 406-410 MHz, ensure compatibility with operational requirements while maintaining precision comparable to civilian systems, though discrepancies in readings up to several degrees have been noted between military and Weather Bureau instruments in joint evaluations. Auxiliary applications extend to testing environments and research support, where units like the U.S. Army's Atmospheric Effects Team deploy balloons during weapons trials to model environmental impacts on performance, including visibility and propagation effects. In aviation-focused squadrons, such as the Air Force's 97th Operations Support Squadron, launches—initiated as recently as June 22, 2023, at —aid in forecasting for pilot training and base operations, reducing risks from or icing aloft. These roles underscore the balloons' utility beyond combat, in and protocols, though they remain distinct from larger stratospheric platforms used for persistent .

Technological Advancements

Variations in Balloon Types

Zero-pressure balloons represent the standard configuration for routine meteorological soundings, featuring an open duct or cul-de-sac that vents excess during ascent to equalize internal and external . Typically constructed from thin natural latex or neoprene, these balloons are filled with (or historically ) and expand progressively as they rise, achieving float altitudes of 30 to 40 kilometers with diameters up to 10 meters. Their design prioritizes rapid ascent rates of 5 to 6 meters per second for timely on , , , and profiles via attached radiosondes. In contrast, superpressure balloons maintain a sealed with internal relative to the ambient atmosphere, preserving constant volume and for extended durations. Fabricated from durable films up to 20 microns thick, these balloons can sustain flights lasting days to weeks, enabling horizontal sampling of atmospheric layers or global at stable altitudes around 20 to 40 kilometers. has deployed superpressure variants with volumes exceeding 100,000 cubic meters for missions requiring prolonged payload stability, such as infrared telescope observations or monitoring. Specialized variants include tetroons, which adopt a tetrahedral shape with constant-volume envelopes made of inelastic or Mylar film, filled with to track Lagrangian air parcel trajectories and processes. Unlike expanding sounding balloons, tetroons maintain fixed dimensions for precise or GPS monitoring at altitudes below 1 kilometer, as demonstrated in studies of urban winds where release triads revealed relative rates scaling with separation distances. Pilot balloons, smaller zero-pressure types without instrument payloads, serve primarily for visual or theodolite-based estimation during ascent.

Modern Enhancements and Innovations

Recent developments in weather balloon technology have focused on extending flight durations and enabling controlled trajectories through the integration of and . WindBorne Systems' balloons, for instance, incorporate AI-driven software that optimizes paths for repeated ascents and descents, achieving average flight times of seven days and up to 16 days, far surpassing traditional single-ascent radiosondes that last about two hours. These systems collect extensive upper-atmosphere data, filling gaps in global coverage, and have been validated through partnerships with the (NOAA). Enhancements in radiosonde instrumentation include GPS integration for precise wind measurements via Doppler tracking, replacing older radar or loran systems and improving accuracy in determining winds aloft. Modern systems like the National Weather Service's MROS feature updated hardware and software for real-time data transmission of temperature, humidity, pressure, and position, with some forgoing onboard pressure sensors in favor of hydrostatic calculations from GPS altitude data. Additionally, superpressure balloon designs maintain constant volume in the stratosphere, enabling weeks-long missions for persistent observations, as explored in NASA studies for meteorological assimilation. Sustainability innovations address the environmental impact of disposable components, with reusable radiosonde systems emerging as alternatives. The Meteoglider, developed by Meteomatics, deploys lightweight gliders to recover and return after flight, enabling reuse and reducing waste from the estimated 100 million annual launches worldwide. Similarly, designs like the airXeed emphasize durable, recoverable payloads to capture vertical profiles while minimizing ecological debris. These advancements prioritize empirical improvements in data yield and cost-efficiency, grounded in operational testing rather than unverified projections.

Environmental and Safety Considerations

Debris Dispersion and Ecological Effects

Upon reaching their typical burst altitude of 30 to 40 kilometers, weather balloons rupture due to expansion from decreasing , releasing the consisting of fragmented envelope, , and instrumentation, which then descends primarily under influence. The descent trajectory is governed by stratospheric and tropospheric , often resulting in landing distances of 100 to 200 kilometers or more downwind from the launch site, with dispersion patterns varying by season and location but frequently directing toward oceanic regions. Globally, approximately 1,800 such launches occur daily, generating a comparable of dispersed payloads each year. This debris contributes to environmental litter, particularly in marine ecosystems, where fragments and non-biodegradable radiosonde components persist longer than initially anticipated despite the use of in balloon envelopes. Studies indicate that does not undergo meaningful degradation in saltwater or freshwater environments over periods of weeks to months, breaking down instead into smaller particles that exacerbate microplastic accumulation. In the World Heritage Area, weather balloon debris has been documented as a predictable , with fragments washing ashore and entering food webs. Ecological consequences include direct harm to through ingestion and entanglement. Marine species such as sea turtles and seabirds mistake latex remnants for prey like , leading to gastrointestinal blockages, malnutrition, and mortality. Entanglement in parachute cords or attachments has caused severe injuries and fatalities, including seven confirmed cases among albatrosses along Brazil's southern and southeastern coasts between 2010 and 2023. electronics and lithium batteries may leach trace chemicals upon degradation, though empirical data on widespread toxicological effects remains limited relative to physical hazards. Overall, while the per-unit impact of individual payloads is small, the cumulative annual volume amplifies risks in debris-prone areas like coastal and pelagic zones.

Mitigation Strategies and Regulations

Mitigation strategies for weather balloon debris primarily focus on post-launch recovery efforts and modifications to minimize ecological harm, though widespread implementation remains limited. In the United States, the encourages public reporting and return of recovered radiosondes—instruments attached to balloons that measure atmospheric data—with over 10,000 units reused annually from such submissions, reducing the need for new manufacturing and associated waste. These recoveries occur via a voluntary program where finders contact local NWS offices, prioritizing safe handling to avoid exposure to residual batteries or electronics. However, only a fraction of the approximately 75,000 annual U.S. launches result in recovered payloads, as descent paths are unpredictable due to patterns. Research has explored recoverable systems to address uncontrolled parachute descents, which scatter latex fragments, plastic components, and metal clips across remote or marine areas. The National Severe Storms Laboratory's Glidersonde project demonstrated feasibility for gliding radiosondes to predetermined landing zones using wing-like attachments, potentially enabling 80-90% recovery rates in tests conducted in the early , though adoption has been constrained by cost and operational complexity compared to standard bursts at 30-40 km altitude. Broader strategies include transitioning to durable, superpressure balloons that avoid bursting altogether, as piloted by firms like Windborne Systems, which incorporate GPS navigation for controlled landings and thus eliminate burst debris; such innovations have logged over 100 flights since 2020 with minimal litter. Nonetheless, traditional latex balloons, comprising the majority of meteorological releases, degrade slowly in oceans—persisting as that entangle like sea turtles, with studies documenting balloon debris in 10-20% of turtle necropsies in affected regions. Regulations emphasize aviation safety over environmental mitigation, with the U.S. (FAA) enforcing 14 CFR Part 101 for unmanned free s, mandating pre-launch notifications to 6-24 hours in advance for those exceeding 1.5 meters in or 2 kg , and prohibiting operations that drop objects creating hazards to persons or property. Operators must track balloon positions at least every two hours until descent, aiming to predict landing zones away from populated areas, though enforcement relies on self-reporting and does not specifically penalize . Internationally, the provides observational guidelines but lacks binding rules, while some jurisdictions impose bans—such as Florida's 2024 prohibition on intentional outdoor releases exceeding 10 units—to curb marine litter, potentially encompassing non-exempt scientific launches if deemed non-essential. Environmental oversight falls under broader frameworks like the NOAA Act, which funds assessments revealing weather balloons as a predictable vector, yet stops short of mandating biodegradable alternatives or mandatory recovery for routine operations. Calls for enhanced regulations persist, citing peer-reviewed of coastal accumulation from twice-daily global releases, but implementation lags due to the scientific necessity of upper-air data.

Notable Incidents and Misconceptions

The Roswell Incident

In July 1947, rancher William Brazel discovered unusual debris scattered across a on the J.B. Foster near , approximately 75 miles northwest of Roswell. The materials included lightweight wooden sticks, rubber strips, reflective foil, and tape bearing pinkish-purple symbols resembling hieroglyphics, which Brazel collected and reported to the Chaves County sheriff's office on July 7 after holding it for about a week. Local authorities notified the Roswell Army Air Field (RAAF), and on July 8, RAAF public information officer issued a claiming the recovery of a "flying disc," amid a national wave of UFO sightings following Arnold's June 24 report of disc-like objects near . This announcement fueled media frenzy, but within hours, military officials from Fort Worth Army Air Field, including General Roger Ramey, retracted it, identifying the debris as from a weather balloon with a target reflector and displaying mundane materials to journalists. The debris originated from , a classified U.S. Air Forces program launched in 1947 to detect Soviet nuclear tests by suspending microphones from trains to capture from distant explosions. Specifically, it matched materials from Mogul Flight No. 4, a train of latex weather balloons and reflectors released on June 4, 1947, from Alamogordo Air Field, which drifted off-course due to unpredictable winds and crashed undetected until Brazel's discovery. Analysis confirmed the foil as laminated neoprene-coated from balloon envelopes, the tape from a toy manufacturer used to seal classified components (printed with flower-like symbols for durability testing), and the balsa wood frames from standard ML-307 targets—none exotic or extraterrestrial. The initial "flying disc" announcement stemmed from excitement over UFO reports and the need to deflect attention from Mogul's secrecy, as the program's balloon clusters could mimic disc shapes from afar, but rapid retraction aligned with standard balloon recovery protocols. An FBI teletype on described the debris as consistent with a hexagonal high-altitude weather balloon array, corroborating the military's assessment. Subsequent investigations, prompted by 1970s-1980s claims of alien craft recovery, reaffirmed the Mogul explanation. The 1994 report "The Roswell Report: Fact vs. Fiction in the Desert," based on declassified records and witness interviews, traced all debris attributes to Mogul components without evidence of advanced technology or non-human biology. A follow-up, "The Roswell Report: ," addressed allegations of recovered bodies by linking them to misremembered 1950s anthropomorphic drops from high-altitude balloons (e.g., Operation High Dive), which used harnesses and parachutes similar to described "injured entities" but occurred years later. No physical artifacts, data, or chain-of-custody documents support extraterrestrial claims, which proliferated via anecdotal books like and William Moore's 1980 "The ," relying on secondhand affidavits prone to memory conflation amid secrecy. UFO proponent sources often prioritize sensational narratives over material evidence, contrasting with verifiable Mogul documentation showing routine balloon failures in a program that launched over 100 flights, many lost. The incident exemplifies how classified mundane technology, combined with public UFO hysteria, generated enduring misconceptions absent empirical corroboration.

Associations with UFO Reports

Weather balloons have been a common prosaic explanation for numerous (UFO) reports, particularly those involving high-altitude objects exhibiting erratic or hovering motion. Their ascent to altitudes exceeding 100,000 feet (30 km), combined with unpredictable trajectories dictated by stratospheric winds, often leads observers on the ground to perceive them as anomalous craft capable of defying conventional . Radiosondes attached to these balloons, which may include flashing lights for tracking or metallic reflectors, can further contribute to luminous or structured appearances, especially during twilight hours when reflection enhances visibility. Declassified U.S. government documents from investigations like (1947–1969) attribute a significant portion of UFO sightings to , with estimates indicating that 90–95% of reports could be resolved as misidentifications of , aircraft, or atmospheric phenomena. For instance, the Federal Bureau of Investigation's 1947 teletype on early "flying disc" incidents described recovered objects as resembling high-altitude suspended by cables, hexagonal in shape due to reflector arrays. Similarly, the U.S. Director of National Intelligence's 2021 preliminary assessment on unidentified aerial phenomena (UAP) identified at least one case with high confidence as a large, deflating , underscoring how burst descending via mimic controlled maneuvers. Mechanisms of misperception include optical illusions from distance and elevation, where balloons appear stationary against the horizon despite lateral drift, and psychological factors amplified during periods of heightened public anxiety, such as the UFO wave following Kenneth Arnold's sighting. NASA's 2023 independent study on UAP similarly concluded that many observations align with balloons or drones, dismissing extraterrestrial origins in favor of empirical prosaic causes based on sensor data and witness analysis. Critics within ufology, however, often reject these attributions as overly simplistic , citing inconsistencies in descent patterns or witness testimonies of structured craft, though such claims lack corroborative physical evidence beyond anecdotal reports. Recent incidents, such as the 2023 detection of a high-altitude Chinese surveillance balloon over , reignited associations by prompting initial UFO-like before official identification, highlighting persistent challenges in real-time discrimination amid advanced balloon technologies. Military analyses, including those from the (AARO), continue to resolve select UAP cases as errant or research balloons through trajectory modeling and debris recovery, reinforcing that atmospheric probes remain a primary vector for false positives in aerial anomaly reporting.

References

  1. https://www.noaa.gov/jetstream/upperair/radiosondes
  2. https://www.noaa.gov/stories/6-tools-our-meteorologists-use-to-forecast-weather
  3. https://www.ncei.noaa.gov/products/weather-balloon
  4. https://vlab.noaa.gov/web/nws-heritage/-/out-of-thin-air-the-history-and-evolution-of-upper-air-observations
  5. https://www.noaa.gov/news/fifty-years-ago-historic-balloon-launch-changed-way-we-see-ozone-layer
  6. https://repository.library.noaa.gov/view/noaa/54063/noaa_54063_DS1.pdf
  7. https://www.weather.gov/gjt/education_corner_balloon
  8. https://www.aoml.noaa.gov/upper-air-observations/
  9. https://www.faa.gov/regulations_policies/handbooks_manuals/aviation/Balloon_Flying_Handbook_FAA-H-8083-11B/bfh_glossary.pdf
  10. https://www.grc.nasa.gov/www/k-12/WindTunnel/Activities/buoy_Archimedes.html
  11. https://www.weather.gov/chs/upperair
  12. https://www.weather.gov/upperair/reqdahdr
  13. https://conscicom.web.ox.ac.uk/article/citizen-meteorology-victorian-style-the-meteorological-balloon-ascents-of-1852
  14. https://pmc.ncbi.nlm.nih.gov/articles/PMC5734649/
  15. https://journals.ametsoc.org/downloadpdf/journals/bams/45/1/1520-0477-45_1_12.pdf
  16. https://adsabs.harvard.edu/full/1972SSRv...13..199P
  17. https://www.highaltitudescience.com/pages/intro-to-weather-balloons
  18. https://www.boulder.noaa.gov/wp-content/uploads/2022/11/Learn-more-about-radiosonde-dropsonde.pdf
  19. https://www.nist.gov/nist-museum/tuning-weather-forecasting
  20. https://www.ncei.noaa.gov/products/weather-balloon/integrated-global-radiosonde-archive
  21. https://wmo.int/media/magazine-article/wmo-data-exchange-background-history-and-impact
  22. https://weatherscientific.com/blogs/weather-scientific-blogs/history-of-weather-balloons
  23. https://library.wmo.int/records/item/50499-wmo-intercomparison-of-high-quality-radiosonde-systems
  24. https://community.wmo.int/en/observation-components-global-observing-system
  25. https://www.ecmwf.int/en/newsletter/149/meteorology/global-radiosonde-network-under-pressure
  26. https://repository.library.noaa.gov/view/noaa/53514/noaa_53514_DS1.pdf
  27. https://www.iso.org/obp/ui/es/#!iso:std:iso:17717:ed-1:en
  28. https://scientificsales.com/collections/natural-latex-weather-balloons
  29. https://datuming.com/wp-content/uploads/wpallimport/files/pdf/Leaflet-Metballoon-TOTEX.pdf
  30. http://www.randomengineering.co.uk/Random_Aerospace/Balloons.html
  31. https://the-rocketman.com/kaymont-weather-balloons/
  32. https://www.sciencedirect.com/science/article/abs/pii/S0025326X13007959
  33. https://physlab.org/wp-content/uploads/2023/01/student_manual_additional_notes.pdf
  34. https://www.vaisala.com/en/products/weather-environmental-sensors/upper-air-radiosondes-rs41-rs41-e-models
  35. https://www.vaisala.com/sites/default/files/documents/Radiosonde-RS41-GNSS-based-height-and-pressure-TechnicalPaper-B212981EN.pdf
  36. https://www.gruan.org/instruments/radiosondes/sonde-models/vaisala-rs41
  37. https://www.weather.gov/media/key/Weather-Balloons.pdf
  38. https://www.vaisala.com/sites/default/files/documents/Vaisala%2520Radiosonde%2520RS41-SGM%2520User%2520Guide%2520M211752EN.pdf
  39. https://launchwithus.com/products/weather-balloon-quick-fill-inflation-system-with-regulator
  40. https://www.weather.gov/upperair/radiosonde
  41. https://www.meteomodem.com/accessories
  42. https://www.weather.gov/ilx/ua-tour
  43. https://pubs.aip.org/aapt/pte/article/54/5/268/277790/Weather-Balloon-Ascent-Rate
  44. https://www.intermetsystems.com/wp-content/uploads/2022/01/200745-10_Meteorological_Balloon_Inflation_Guide.pdf
  45. https://www.faa.gov/air_traffic/publications/atpubs/notam_html/appendix_f.html
  46. https://amt.copernicus.org/articles/13/3621/2020/
  47. https://basicairdata.eu/knowledge-center/design/introduction-to-weather-balloons/
  48. https://www.weather.gov/media/upperair/Documents/Radiosonde%2520Ascent%2520Rates.pdf
  49. https://journals.ametsoc.org/view/journals/bams/98/2/bams-d-16-0094.1.xml
  50. https://www.foxweather.com/weather-news/weather-balloon-pop-radiosonde-track
  51. https://www.stratoflights.com/en/weather-balloon-burst/
  52. https://www.weather.gov/upperair/factsheet
  53. https://agupubs.onlinelibrary.wiley.com/doi/full/10.1029/2010JD014891
  54. https://journals.ametsoc.org/view/journals/wefo/28/3/waf-d-12-00114_1.pdf
  55. https://via.library.depaul.edu/cgi/viewcontent.cgi?referer=&httpsredir=1&article=1125&context=ahac
  56. https://www.arl.noaa.gov/documents/reports/balloon.pdf
  57. https://gmd.copernicus.org/articles/17/3783/2024/
  58. https://www.weather.gov/media/directives/010_pdfs/pd01014001curr.pdf
  59. https://www.weather.gov/upperair/rrs_overview
  60. https://www.intermetsystems.com/wp-content/uploads/2022/01/202084-12_iMet-4_Technical_Data_Sheet.pdf
  61. https://www.vaisala.com/en/sounding-systems-radiosondes
  62. https://www.stratoflights.com/en/what-altitude-do-weather-balloons-fly/
  63. https://www.kaymont.com/product-page/kaymont-70g-meteorological-parachute-small-size
  64. https://amt.copernicus.org/articles/15/165/2022/
  65. https://www.weather.gov/rah/virtualtourballoon
  66. https://airandspace.si.edu/collection-objects/monitoring-device-radiosonde-noaa/nasm_A19760965000
  67. https://www.intermetsystems.com/products/introduction-to-radiosondes-and-atmospheric-soundings/
  68. https://wmo.int/activities/global-observing-system-gos/global-observing-system-gos
  69. https://www.boozallen.com/expertise/resilience-solutions/ai-assisted-data-assimilation-improves-forecasting.html
  70. https://rmets.onlinelibrary.wiley.com/doi/abs/10.1002/met.5060020402
  71. https://www.sciencedirect.com/topics/earth-and-planetary-sciences/radiosondes
  72. https://journals.ametsoc.org/view/journals/bams/97/9/bams-d-14-00182.1.xml
  73. https://amt.copernicus.org/articles/9/929/2016/
  74. https://science.nasa.gov/science-research/biological-physical-sciences/balloons-offer-near-space-access-for-space-biology-researchers/
  75. https://rmets.onlinelibrary.wiley.com/doi/pdfdirect/10.1002/met.1506
  76. https://ntrs.nasa.gov/api/citations/20090002204/downloads/20090002204.pdf
  77. https://iopscience.iop.org/article/10.1088/1681-7575/ab336f/meta
  78. https://journals.ametsoc.org/view/journals/apme/56/6/jamc-d-16-0136.1.xml
  79. https://amt.copernicus.org/preprints/amt-2018-246/amt-2018-246.pdf
  80. https://www.aetc.af.mil/News/Article-Display/Article/3436899/97-oss-makes-history-with-first-weather-balloon-launch/
  81. https://www.meteomodem.com/military
  82. https://nationalguard.com/13t-field-artillery-surveyormeteorological-crewmember
  83. https://www.dvidshub.net/image/9161404/meteorological-specialist-launches-weather-balloon-support-artillery-operations-iraq
  84. https://americanhistory.si.edu/collections/object/nmah_1167623
  85. https://journals.ametsoc.org/view/journals/mwre/93/4/1520-0493_1965_093_0253_cousr_2_3_co_2.pdf
  86. https://www.reddit.com/r/meteorology/comments/1eamrct/who_assigns_radiosonde_frequencies/
  87. https://www.army.mil/article/281799/atmospheric_effects_team_uses_state_of_the_art_technology_to_predict_the_weather_critical_in_army_testing
  88. https://www.lockheedmartin.com/en-us/products/meteorological-instrumentation.html
  89. https://www.nasa.gov/scientificballoons/types-of-balloons/
  90. https://www.csbf.nasa.gov/balloons.html
  91. https://journals.ametsoc.org/view/journals/apme/36/7/1520-0450_1997_036_0931_ddolsw_2.0.co_2.xml
  92. https://wpo.noaa.gov/windborne-weather-balloon-reaches-new-heights/
  93. https://insideclimatenews.org/news/01082025/private-companies-noaa-weather-data/
  94. https://ntrs.nasa.gov/api/citations/20190001811/downloads/20190001811.pdf
  95. https://www.meteomatics.com/en/meteoglider/
  96. https://www.jamesdysonaward.org/en-US/2024/project/airxeed-radiosonde
  97. https://www.meteorologicaltechnologyinternational.com/features/exclusive-feature-how-are-industry-leaders-increasing-the-sustainability-of-radiosondes.html
  98. https://science.howstuffworks.com/nature/climate-weather/meteorological-instruments/weather-balloon.htm
  99. https://abcnews.go.com/Politics/weather-balloons-hundreds-turns/story?id=97082985
  100. https://www.sciencedirect.com/science/article/abs/pii/S0304389420316150
  101. https://www.smithsonianmag.com/science-nature/heres-how-weather-balloons-can-harm-marine-animals-180985276/
  102. https://www.sciencedirect.com/science/article/abs/pii/S0025326X24002443
  103. https://www.ehn.org/weather-balloons-threaten-marine-life-after-bursting
  104. https://hakaimagazine.com/news/weather-forecasting-is-deadly-for-marine-wildlife/
  105. https://extension.psu.edu/what-to-do-if-you-find-a-weather-balloon/
  106. https://www.nssl.noaa.gov/projects/glidersonde/report/
  107. https://pubmed.ncbi.nlm.nih.gov/24434000/
  108. https://www.faa.gov/air_traffic/publications/atpubs/atc_html/chap9_section_6.html
  109. https://www.flsenate.gov/Session/Bill/2024/321/Analyses/h0321c.CRJ.PDF
  110. https://media.defense.gov/2010/Oct/27/2001330219/-1/-1/0/AFD-101027-030.pdf
  111. https://apps.dtic.mil/sti/pdfs/ADA326148.pdf
  112. https://prologue.blogs.archives.gov/2018/04/23/ufos-man-made-made-up-and-unknown/
  113. https://science.howstuffworks.com/space/aliens-ufos/the-10-most-legitimate-cases-of-u-f-o-sightings.htm
  114. https://www.dni.gov/files/ODNI/documents/assessments/Prelimary-Assessment-UAP-20210625.pdf
  115. https://www.history.com/articles/u-s-air-force-closes-the-book-on-ufos-45-years-ago
  116. https://www.businessinsider.com/nasa-ufos-probably-balloons-planes-or-solar-glints-not-aliens-2023-9
  117. https://www.theatlantic.com/science/archive/2023/02/chinese-spy-balloon-montana-ufo/672943/
Add your contribution
Related Hubs
User Avatar
No comments yet.