Recent from talks
Nothing was collected or created yet.
Cliff
View on Wikipedia

In geography and geology, a cliff or rock face is an area of rock which has a general angle defined by the vertical, or nearly vertical. Cliffs are formed by the processes of weathering and erosion, with the effect of gravity. Cliffs are common on coasts, in mountainous areas, escarpments and along rivers. Cliffs are usually composed of rock that is resistant to weathering and erosion. The sedimentary rocks that are most likely to form cliffs include sandstone, limestone, chalk, and dolomite. Igneous rocks such as granite and basalt also often form cliffs.
An escarpment (or scarp) is a type of cliff formed by the movement of a geologic fault, a landslide, or sometimes by rock slides or falling rocks which change the differential erosion of the rock layers.
Most cliffs have some form of scree slope at their base. In arid areas or under high cliffs, they are generally exposed jumbles of fallen rock. In areas of higher moisture, a soil slope may obscure the talus. Many cliffs also feature tributary waterfalls or rock shelters. Sometimes a cliff peters out at the end of a ridge, with mushroom rocks or other types of rock columns remaining. Coastal erosion may lead to the formation of sea cliffs along a receding coastline.
The British Ordnance Survey distinguishes between cliffs (continuous line along the topper edge with projections down the face) and outcrops (continuous lines along lower edge).

Etymology
[edit]Cliff comes from the Old English word clif of essentially the same meaning, cognate with Dutch, Low German, and Old Norse klif 'cliff'.[1] These may in turn all be from a Romance loanword into Primitive Germanic that has its origins in the Latin forms clivus / clevus ("slope" or "hillside").[2][3]
Large and famous cliffs
[edit]This section needs additional citations for verification. (March 2017) |







Given that a cliff does not need to be exactly vertical, there can be ambiguity about whether a given slope is a cliff or not and also about how much of a certain slope to count as a cliff. For example, given a truly vertical rock wall above a very steep slope, one could count just the rock wall or the combination. Listings of cliffs are thus inherently uncertain.
Some of the largest cliffs on Earth are found underwater. For example, an 8,000 m drop over a 4,250 m span can be found at a ridge sitting inside the Kermadec Trench. Or, some of the largest sea cliffs in the southern hemisphere exist both above (300 m) and below the waterline on the south-eastern edge of the island state of Tasmania, Australia: these are of the hard, igneous rock dolerite.
According to some sources, the highest cliff in the world, about 1,340 m high, is the east face of Great Trango in the Karakoram mountains of northern Pakistan. This uses a fairly stringent notion of cliff, as the 1,340 m figure refers to a nearly vertical headwall of two stacked pillars; adding in a very steep approach brings the total drop from the East Face precipice to the nearby Dunge Glacier to nearly 2,000 m.
The location of the world's highest sea cliffs depends also on the definition of 'cliff' that is used. Guinness World Records states it is Kalaupapa, Hawaii,[5] at 1,010 m high. Another contender is the north face of Mitre Peak, which drops 1,683 m to Milford Sound, New Zealand.[6] These are subject to a less stringent definition, as the average slope of these cliffs at Kaulapapa is about 1.7, corresponding to an angle of 60 degrees, and Mitre Peak is similar. A more vertical drop into the sea can be found at Maujit Qaqarssuasia (also known as the 'Thumbnail') which is situated in the Torssukátak fjord area at the very tip of South Greenland and drops 1,560 m near-vertically.[7]
Considering a truly vertical drop, Mount Thor on Baffin Island in Arctic Canada is often considered the highest at 1370 m (4500 ft) high in total (the top 480 m (1600 ft) is overhanging), and is said to give it the longest vertical drop on Earth at 1,250 m (4,100 ft). However, other cliffs on Baffin Island, such as Polar Sun Spire in the Sam Ford Fjord, or others in remote areas of Greenland may be higher.
The highest cliff in the Solar System may be Verona Rupes, an approximately 20 km (12 mi) high fault scarp on Miranda, a moon of Uranus.
List
[edit]The following is an incomplete list of cliffs of the world.
Africa
[edit]Above Sea
- Anaga's Cliffs, Tenerife, Canary Islands, Spain, 592 m (1,942 ft) above Atlantic Ocean
- Cape Hangklip, Western Cape, South Africa, 453.1 m (1,487 ft) above False Bay, Atlantic Ocean
- Cape Point, Western Cape, South Africa, 249 m (817 ft) above Atlantic Ocean
- Chapman's Peak, Western Cape, South Africa, 596 m (1,955 ft) above Atlantic Ocean
- Karbonkelberg, Cape Town, Western Cape, South Africa, 653 m (2,142 ft) above Hout Bay, Atlantic Ocean
- Kogelberg, Western Cape, South Africa, 1,289 m (4,229 ft) above False Bay, Atlantic Ocean
- Los Gigantes, Tenerife, Canary Islands, Spain, 637 m (2,090 ft) above Atlantic Ocean
- Table Mountain, Cape Town, Western Cape, South Africa, 1,086 m (3,563 ft) above Atlantic Ocean
Above Land
- Innumerable peaks in the Drakensberg mountains of South Africa are considered cliff formations. The Drakensberg Range is regarded, together with Ethiopia's Simien Mountains, as one of the two finest erosional mountain ranges on Earth. Because of their near-unique geological formation, the range has an extraordinarily high percentage of cliff faces making up its length, particularly along the highest portion of the range.[citation needed] This portion of the range is virtually uninterrupted cliff faces, ranging from 600 m (2,000 ft) to 1,200 m (3,900 ft) in height for almost 250 km (160 mi). Of all, the "Drakensberg Amphitheatre" (mentioned above) is most well known.[citation needed] Other notable cliffs include the Trojan Wall, Cleft Peak, Injisuthi Triplets, Cathedral Peak, Monk's Cowl, Mnweni Buttress, etc. The cliff faces of the Blyde River Canyon, technically still part of the Drakensberg, may be over 800 m (2,600 ft), with the main face of the Swadini Buttress approximately 1,000 m (3,300 ft) tall.
- Drakensberg Amphitheatre, South Africa 1,200 m (3,900 ft) above base, 5 km (3.1 mi) long. The Tugela Falls, the world's second tallest waterfall, falls 948 m (3,110 ft) over the edge of the cliff face.
- Karambony, Madagascar, 380 m (1,250 ft) above base.
- Mount Meru, Tanzania Caldera Cliffs, 1,500 m (4,900 ft)
- Tsaranoro, Madagascar, 700 m (2,300 ft) above base
Americas
[edit]North
[edit]

Several big granite faces in the Arctic region vie for the title of 'highest vertical drop on Earth', but reliable measurements are not always available. The possible contenders include (measurements are approximate):
Mount Thor, Baffin Island, Canada; 1,370 m (4,500 ft) total; top 480 m (1600 ft) is overhanging. This is commonly regarded as being the largest vertical drop on Earth [1][2][citation needed]ot:leapyear at 1,250 m (4,100 ft).
- The sheer north face of Polar Sun Spire, in the §74:MTAtoFa
of Baffin Island, rises 4,300 ft above the flat frozen fjord, although the lower portion of the face breaks from the vertical wall with a series of ledges and buttresses.[8]
- Ketil's and its neighbor Ulamertorsuaq's west faces in Tasermiut, Greenland have been reported as over 1,000 m high.[9][10][11] Another relevant cliff in Greenland is Agdlerussakasit's Thumbnail.[12]
Other notable cliffs include:
- Ättestupan Cliff, northern side of Kaiser Franz Joseph Fjord, Greenland 1,300 m (4,300 ft)[13]
- Big Sandy Mountain, east face buttress, Wind River Range, Wyoming, 550 m
- Calvert Cliffs along the Chesapeake Bay in Maryland, U.S. 25 m
- Cap Éternité of Saguenay River, Quebec, Canada, 347 m
- All faces of Devils Tower, Wyoming, United States, 195 m
- Doublet Peak, southwest face, Wind River Range, Wyoming, United States, 370 m
- El Capitan, Yosemite Valley, California, United States; 900 m (3,000 ft)
- Grand Teton, north face Teton Range, Wyoming 760 m (2,490 ft)
- Northwest Face of Half Dome, near El Capitan, California, United States; 1,444 m (4,737 ft) total, vertical portion about 610 m (2,000 ft)
- Longs Peak Diamond, Rocky Mountain National Park, Colorado, United States, 400 m
- Mount Asgard, Baffin Island, Canada; vertical drop of about 1,200 m (4,000 ft).
- Mount Siyeh, Glacier National Park (U.S.) north face, 1,270 m (4,170 ft)
- The North Face of North Twin Peak, Rocky Mountains, Alberta, Canada, 1,200 m
- The west face of Notch Peak in the House Range of southwestern Utah, U.S.; a carbonate rock pure vertical drop of about 670 m (2,200 ft), with 4,450 feet (1,356 m) from the top of the cliff to valley floor (bottom of the canyon below the notch)
- Painted Wall in Black Canyon of the Gunnison National Park, Colorado, United States; 685 m (2,250 ft)
- Raftsmen's Acropolis, a rock face of the Montagne des Érables, Quebec, Canada, 800 m
- Rockwall, Kootenay National Park, British Columbia, Canada, 30 km of mostly unbroken cliffs up to 900 m [14]
- Royal Gorge cliffs, Colorado, United States, 350 m
- Faces of Shiprock, New Mexico, United States, 400 m
- All walls of the Stawamus Chief, Squamish, British Columbia, Canada, up to 500 m
- Temple Peak, east face, Wind River Range, Wyoming, 400 m
- Temple Peak East, north face, Wind River Range, Wyoming, 450 m
- Toroweap (a.k.a. Tuweep), Grand Canyon, Arizona, United States; 900 m (3,000 ft)
- Uncompahgre Peak, northeast face, San Juan Range, Colorado, 275 m (550 m rise above surrounding plateau)
- East face of the West Temple in Zion National Park, Utah, United States believed to be the tallest sandstone cliff in the world,[15] 670 m
South
[edit]- All faces of Auyan Tepui, along with all other Tepuis, Venezuela, Brazil, and Guyana, Auyan Tepui is about 1,000 m (location of Angel Falls) (the falls are 979 m, the highest in the world)
- All faces of Cerro Chalten (Fitz Roy), Patagonia, Argentina-Chile, 1200 m
- All faces of Cerro Torre, Patagonia, Chile-Argentina
- Pão de Açúcar/Sugar Loaf, Rio de Janeiro, Brazil, 395 m
- Pared de Gocta, Peru, 771 m
- Pared Sur Cerro Aconcagua. Las Heras, Mendoza, Argentina, 2,700 m
- Pedra Azul, Pedra Azul State Park, Espírito Santo, Brazil, 540 m
- Scratched Stone (Pedra Riscada), São José do Divino/MG, Minas Gerais, Brazil, 1,480 m
- Faces of the Torres del Paine group, Patagonia, Chile, up to 900 m
Asia
[edit]Above Sea
- Mont Lesquin, Île de l'Est, Crozet Islands, France, 1012 m above Indian Ocean.[16]
- Qingshui Cliff, Xiulin Township, Hualien County, Taiwan averaging 800 m above Pacific Ocean. The tallest peak, Qingshui Mountain, rises 2408 m directly from the Pacific Ocean.
- Ra's Sajir, Oman, 900 m (3,000 ft) above the Arabian Sea
- Theoprosopon, between Chekka and Selaata in north Lebanon jutting into the Mediterranean.
- Tōjinbō, Sakai, Fukui prefecture, Japan 25 m above Sea of Japan
Above Land
- Various cliffs in the Ak-Su Valley of Kyrgyzstan are high and steep.
- Baintha Brakk (The Ogre), Panmah Muztagh, Gilgit–Baltistan, Pakistan, 2,000 m
- Gyala Peri, southeast face, Namcha Barwa Himal, Mêdog County, Tibet, China, 4,600 m
- Hunza Peak south face, Karakoram, Gilgit–Baltistan, Pakistan, 1,700 m
- K2 west face, Karakoram, Gilgit–Baltistan, Pakistan, 2900m
- The Latok Group, Panmah Muztagh, Gilgit–Baltistan, Pakistan, 1,800 m
- Lhotse northeast face, Mahalangur Himal, Nepal, 2,900 m
- Lhotse south face, Mahalangur Himal, Nepal, 3,200 m
- Mount Everest east face, Mahalangur Himal, Tibet, China, 3,350 m
- Dhaulagiri south face, Dhaulagiri Himal, Nepal, 4,000 m
- Dhaulagiri west face, Dhaulagiri Himal, Nepal, 4,700 m
- Gurja Himal south face, Dhaulagiri Himal, Nepal, 4,000 m
- Annapurna south face, Annapurna Himal, Nepal, 3,000 m
- Annapurna Fang southwest face, Annapurna Himal, Nepal, 4,900 m
- Meru Peak, Uttarakhand, India, 1,200 m
- Nanga Parbat, Rupal Face, Azad Kashmir, Pakistan, 4,600 m
- Qingshui Cliff, Xiulin Township, Hualien County, Taiwan averaging 800 m above Pacific Ocean. The tallest peak, Qingshui Mountain, rises 2408 meters directly from the Pacific Ocean.
- Ramon Crater, Israel, 400 m
- Shispare Sar southwest face, Karakoram, Gilgit–Baltistan, Pakistan, 3,200 m
- Spantik northwest face, Karakoram, Gilgit–Baltistan, Pakistan, 2,000 m
- Trango Towers: East Face Great Trango Tower, Baltoro Muztagh, Gilgit–Baltistan, Pakistan, 1,340 m (near vertical headwall), 2,100 m (very steep overall drop from East Summit to Dunge Glacier). Northwest Face drops approximately 2,200 m to the Trango Glacier below, but with a taller slab topped out with a shorter overhanging headwall of approximately 1,000 m. The Southwest "Azeem" Ridge forms the group's tallest steep rise of roughly 2,286 m (7,500 ft) from the Trango Glacier to the Southwest summit.
- Uli Biaho Towers, Baltoro Glacier, Gilgit–Baltistan, Pakistan
- Ultar Sar southwest face, Karakoram, Gilgit–Baltistan, Pakistan, 3,000 m
- World's End, Horton Plains, Nuwara Eliya, Sri Lanka. It has a sheer drop of about 4000 ft (1200 m)
- Various cliffs in Zhangjiajie National Forest Park, Hunan Province, China. The cliffs can get to around 1,000 ft (300 m).
Europe
[edit]Above Sea
- Beachy Head, England, 162 m above the English Channel
- Beinisvørð, Faroe Islands, 470 m above North Atlantic
- Belogradchik Rocks, Bulgaria - up to 200 m high sandstone towers
- Benwee Head Cliffs, Erris, County Mayo, Ireland, 304 m above Atlantic Ocean
- Cabo Girão, Madeira, Portugal, 589 m above Atlantic Ocean
- Cap Canaille, France, 394 m above Mediterranean sea is the highest sea cliff in France
- Cape Enniberg, Faroe Islands, 750 m above North Atlantic
- Conachair, St Kilda, Scotland 427 m above Atlantic Ocean, highest sea cliff in the UK
- Croaghaun, Achill Island, Ireland, 688 m above Atlantic Ocean
- Dingli Cliffs, Malta, 250 m above Mediterranean sea
- Dvuglav, Rila Mountain, Bulgaria 460 m (south face)
- Étretat, France, 84 m above the English Channel
- Faneque, Gran Canaria, Spain, 1027 m above Atlantic Ocean
- Hangman cliffs, Devon 318 m above Bristol Channel is the highest sea cliff in England
- High Cliff, between Boscastle and St Gennys, 223 m above Celtic Sea[17]
- Hornelen, Norway, 860 m above Skatestraumen
- Hvanndalabjarg, Ólafsfjörður, Iceland, 630 m above Atlantic Ocean
- Jaizkibel, Spain, 547 m above the Bay of Biscay
- Kaliakra cliffs, Bulgaria, more than 70 m above the Black Sea
- The Kame, Foula, Shetland, 376 m above the North Atlantic, second highest sea cliff in the UK
- Le Tréport, France, 110 m above the English Channel
- Cliffs of Moher, Ireland, 217 m above Atlantic Ocean
- Møns Klint, Denmark, 143 m above Baltic Sea
- Monte Solaro, Capri, Italy, 589 m above the Mediterranean Sea
- Ontika Limestone cliff, Estonia, 55 m above Baltic Sea.
- Preikestolen, Norway, 604 m above Lysefjorden
- Slieve League, Ireland, 601 m above Atlantic Ocean
- Snake Island, Ukraine, 41 m above the Black Sea
- Vixía Herbeira, Northern Galicia, Spain, 621 m above Atlantic Ocean
- White cliffs of Dover, England, 100 m above the Strait of Dover
Above Land
- The six great north faces of the Alps (Eiger 1,500 m, Matterhorn 1,350 m, Grandes Jorasses 1,100 m, Petit Dru 1,000 m, and Piz Badile 850 m, Cima Grande di Lavaredo 450 m)
- Giewont (north face), Tatra Mountains, Poland, 852 m above Polana Strążyska glade
- Kjerag, Norway 984 m.
- Mięguszowiecki Szczyt north face rises to 1,043 m above Morskie Oko lake level, High Tatras, Poland
- Troll Wall, Norway 1,100 m above base
- Vihren peak north face, Pirin Mountain, Bulgaria 460 m to the (Golemiya Kazan)
- Torre Cerredo west face rises to 2,200 m above Cares river, Picos de Europa, Spain
- Naranjo de Bulnes west face rises 550 vertical metres above Vega Urriellu, Picos de Europa, Spain
- Vârful Coștila, Munții Bucegi peretele Văii Albe, Bucegi Mountains, Romania 450 m vertical cliff and 1,600 m above Bușteni
- Vratsata, Vrachanski Balkan Nature Park, Bulgaria 400 m [18]
Submarine
- Bouldnor Cliff - the waters of the coast of the Isle of Wight[19]
Oceania
[edit]Above Sea
- Ball's Pyramid, a sea stack 562m high and only 200m across at its base
- The Elephant, New Zealand, has cliffs falling approx 1180m into Milford Sound, and a 900m drop in less than 300 m horizontally
- Great Australian Bight
- Kalaupapa, Hawaii, 1,010 m above Pacific Ocean
- The Lion, New Zealand, 1,302 m above Milford Sound (drops from approx 1280m to sea level in a very short distance)
- Lovers Leap, Highcliff, and The Chasm, on Otago Peninsula, New Zealand, all 200 to 300 m above the Pacific Ocean
- Mitre Peak, New Zealand, 1,683 m above Milford Sound
- Tasman National Park, Tasmania, has 300m dolerite sea cliffs dropping directly to the ocean in columnar form
- The Twelve Apostles (Victoria). A series of sea stacks in Australia, ranging from approximately 50 to 70 m above the Bass Strait
- Zuytdorp Cliffs in Western Australia
Above Land
- Mount Banks in the Blue Mountains National Park, New South Wales, Australia: west of its saddle there is a 490 m fall within 100 M horizontally.[20]
As habitat
[edit]Cliff landforms provide unique habitat niches to a variety of plants and animals, whose preferences and needs are suited by the vertical geometry of this landform type. For example, a number of birds have decided affinities for choosing cliff locations for nesting,[21] often driven by the defensibility of these locations as well as absence of certain predators. Humans have also inhabited cliff dwellings.
Flora
[edit]The population of the rare Borderea chouardii, during 2012, existed only on two cliff habitats within western Europe.[22]
See also
[edit]References
[edit]- ^ Oxford English Dictionary, 1971
- ^ a b "Francia 18/1 (1991)". francia.digitale-sammlungen.de. Archived from the original on 2015-01-29. Retrieved 2023-10-04.
- ^ Max Pfister: Altromanische Relikte in der östlichen und südlichen Galloromania, in den rheinischen Mundarten, im Alpenraum und in Oberitalien. In : Sieglinde Heinz, Ulrich Wandruszka [ed.]: Fakten und Theorien : Beitr. zur roman. u. allg. Sprachwiss.; Festschr. für Helmut Stimm zum 65. Geburtstag, Tübingen 1982, pp. 219 – 230, ISBN 3-87808-936-8
- ^ "Natural world: the solar system: highest cliffs". Guinness World Records. Archived from the original on 2006-05-21. Retrieved 2014-11-16.
- ^ "Highest Cliffs". Guinness World Records. Archived from the original on 2005-11-27. Retrieved 2006-05-02.
- ^ Lück, Michael (2008). The Encyclopedia of Tourism and Recreation in Marine Environments By Michael Lück. ISBN 978-1-84593-350-0. Archived from the original on 2017-12-06. Retrieved 2009-08-01.
- ^ "Planet Fear". Archived from the original on 2012-03-26. Retrieved 2009-08-04.
- ^ "Polar Sun Spire". SummitPost.Org. Archived from the original on 2008-12-02. Retrieved 2008-07-31.
- ^ "Climbing in Tasermiut". bigwall.dk. Archived from the original on 2008-12-05. Retrieved 2008-09-02.
- ^ "The American Alpine Journal" (PDF). 1986. Archived from the original (PDF) on October 28, 2008. Retrieved 2008-09-02.
- ^ "Grande Muralha da Groenlândia". Archived from the original on 2016-03-04.
- ^ Jon Roberts: Agdlerussakasit (1750 m), east face, new route on east face; The Butler (900 m) and Mark (900 m), first ascents. American Alpine Journal (AAJ) 2004, pp. 266–267
- ^ "Catalogue of place names in northern East Greenland". Geological Survey of Denmark. Retrieved 20 September 2019.
- ^ "Backpacking - Kootenay National Park". National Park Service. Archived from the original on 2019-09-29. Retrieved 2020-09-23.
- ^ "Geology Fieldnotes". National Park Service. Archived from the original on 2013-05-22. Retrieved 2010-11-28.
- ^ "TOP 10: Les falaises les plus hautes du monde".
- ^ "Crackington Haven to Tintagel - a day's walk along the South West Coast Path". southwestcoastpath.com. Archived from the original on 2011-06-11.
- ^ "BULGARIAN CLIMBING AND MOUNTAINEERING FEDERATION" (PDF).
- ^ Smith, Oliver; Momber, Gary; Bates, C Richard; Garwood, Paul; Fitch, Simon; Gaffney, Vincent; Allaby, Robin G (2015). "Sedimentary DNA from a submerged site reveals wheat in the British Isles 8000 years ago". Science. 347 (6225). academic.microsoft.com: sciencemag: 998–1001. Bibcode:2015Sci...347..998S. doi:10.1126/SCIENCE.1261278. hdl:10454/9405. PMID 25722413. S2CID 1167101. Retrieved 7 June 2021 – via Microsoft Academic.[dead link]
- ^ Mount Wilson 1:25000 Map. NSW Govt. May 2014.
- ^ "Abiotic factor". Archived from the original on 2013-06-08.
- ^ González, García; Begoña, María; Espadaler, X; Olesen, Jens M (12 September 2012). Bente Jessen Graae (ed.). "Extreme Reproduction and Survival of a True Cliffhanger: The Endangered Plant Borderea chouardii (Dioscoreaceae)". PLOS ONE. 7 (9) e44657. digital.csic.es: Public Library of Science. Bibcode:2012PLoSO...744657G. doi:10.1371/journal.pone.0044657. hdl:10261/56308. PMC 3440335. PMID 22984539.
External links
[edit]- . Encyclopedia Americana. 1920.
Cliff
View on GrokipediaDefinition and Etymology
Definition
A cliff is a significant geomorphological landform characterized by a steep, vertical or near-vertical rock face or slope that rises abruptly from the surrounding terrain.[1] Typically formed through processes such as erosion and weathering,[1] or tectonic activity,[2] it represents a pronounced break in the landscape where resistant rock layers are exposed. This structure is commonly observed in diverse settings, including coastlines, river valleys, and mountainous regions, emphasizing its role as a natural escarpment rather than a constructed or artificial feature. Morphologically, cliffs exhibit features such as overhanging faces, sheer vertical drops, and bases that often lie at sea level, valley floors, or other low-lying areas.[1] The rock composing a cliff is generally hard and resistant to weathering, contributing to its steep profile and the accumulation of debris like scree or talus at its foot.[1] These elements create a wall-like appearance, with the face's angle approaching or equaling 90 degrees from the horizontal, distinguishing it from more gradual inclines. As a purely physical landform, a cliff is defined by its geological and topographical attributes, excluding any biological, cultural, or anthropogenic interpretations.[1] It contrasts sharply with gentler slopes, such as hillsides or escarpments with lower gradients, due to its abrupt elevation change and minimal intermediate terrain.[1] This fundamental distinction underscores the cliff's prominence in shaping landscapes through its verticality and exposure.Etymology
The word "cliff" originates from Old English clif, denoting a steep slope, bank, or riverbank, and is derived from Proto-Germanic *klifą, with cognates including Dutch klif and German Klipp.[5][6] This Proto-Germanic root likely traces back to an Indo-European base related to concepts of inclines or projections, though its precise deeper origins remain uncertain.[5] Through its evolution, the term passed into Middle English as clif or cliffe around the 12th century, retaining its core meaning of a steep, rugged rock face while expanding to encompass coastal or elevated landforms.[7] Influences from Old Norse klif, meaning a similar steep slope, contributed to its usage in Scandinavian-influenced English dialects, particularly in northern regions where Viking settlements integrated the term into local topography descriptions.[5] By the early modern period, "cliff" had standardized in English to refer primarily to high, vertical rock faces, as seen in literary and cartographic texts from the 16th century onward.[8] Related terms in English geography include "escarpment," borrowed from French escarpement in the early 19th century, itself from the verb escarper ("to make steep"), ultimately derived from Italian scarpa ("slope" or "embankment").[9][10] Another synonym, "bluff," entered English in the late 17th century as a nautical term for a broad, flat-fronted cliff, stemming from Dutch blaf ("broad" or "flat"), distinct from the unrelated verb sense of bluffing. These borrowings highlight how "cliff" and its synonyms reflect a blend of Germanic roots with Romance and Low German influences in describing steep terrain.[9]Formation and Geology
Geological Processes
Cliffs form primarily through a combination of tectonic uplift and erosional processes that expose and sculpt resistant rock layers. Tectonic uplift, driven by plate tectonics, elevates landmasses, making them susceptible to surface erosion by exposing bedrock to atmospheric and hydrological forces.[11] In active tectonic settings, such as convergent or transform plate boundaries, this uplift creates initial steep slopes, including fault scarps—abrupt escarpments formed along fault lines during earthquakes where one block of rock is displaced relative to another.[12] Mass wasting processes, like landslides and rockfalls, further contribute to steepening these slopes by removing material under gravity's influence, often triggered by seismic activity or heavy rainfall.[13] Erosion by water plays a dominant role in shaping cliffs across various environments. In riverine settings, lateral and vertical incision by flowing water carves deep valleys with near-vertical walls, as seen in the New River Gorge where prolonged stream erosion has formed prominent sandstone cliffs.[14] Coastal cliffs arise from wave action that undercuts the base, creating notches and oversteepening the face, which leads to episodic collapses; for instance, in California, wave undercutting in sedimentary rocks like sandstone results in retreats exceeding 10 meters during storms.[3] Differential erosion exacerbates this in layered sedimentary rocks, where softer materials erode faster than overlying resistant layers, producing vertical faces.[15] Wind and ice also contribute significantly in specific climates. In arid regions, wind abrasion erodes softer sediments, leaving resistant formations like the cliff-forming Navajo Sandstone, which originated from ancient wind-deposited dunes.[16] Glacial ice erodes through plucking and abrasion, quarrying blocks from valley walls to form steep cirque cliffs and U-shaped troughs with hanging valleys.[17] The nature of these processes varies with rock type. In soluble rocks like limestone, chemical dissolution by acidic groundwater enlarges joints and caves, leading to collapse and cliff formation, as observed in karst landscapes where uneven weathering creates bold escarpments.[18] Conversely, resistant igneous rocks such as basalt withstand erosion longer, forming persistent cliffs through slower mechanical weathering, exemplified by sea stacks and caves along faulted basalt coasts where differential resistance preserves steep profiles.[19] These interactions highlight how rock composition influences the rate and style of cliff development.[3]Types of Cliffs
Cliffs are classified using multiple criteria to account for their diverse formations and associated geological processes. Primary classifications include location, which distinguishes between coastal or sea cliffs exposed to marine influences and inland or continental cliffs situated in terrestrial environments such as mountains or valleys.[1] Another key criterion is origin, encompassing erosional processes that carve cliffs through weathering and abrasion, tectonic origins from crustal movements like faulting, and depositional origins where differential erosion acts on accumulated sediment layers to produce steep faces.[3] Composition provides further taxonomy, with cliffs formed from sedimentary rocks like sandstone, which often layer to create stepped profiles; igneous rocks such as basalt, yielding resistant vertical walls; or metamorphic rocks like gneiss, which exhibit variable durability based on foliation and mineral content.[20][21] These criteria overlap, as a cliff's material influences how origins manifest, for instance, sedimentary layers deposited horizontally may erode into escarpments under tectonic uplift. Among specific types, sea cliffs represent erosional coastal formations primarily shaped by wave action that undercuts and retreats the shoreline, often resulting in near-vertical faces in resistant rock.[22] Fault cliffs, a tectonic variant, emerge as scarps along active fault lines, particularly in rift zones where extensional forces displace rock blocks, creating abrupt elevations.[23][24] Ice cliffs occur at glacier termini through calving, where gravitational instability causes massive ice blocks to detach and plunge into adjacent water, forming temporary steep ice faces.[25] Man-made cliffs, noted briefly as artificial analogs, arise from quarrying operations that excavate rock faces resembling natural cliffs, though they lack endogenous geological processes. Cliffs also differ in unique features such as angle and scale, which reflect their material and formation dynamics. Vertical or near-vertical angles predominate in hard igneous or metamorphic compositions resistant to subaerial weathering, while overhanging profiles develop from basal undercutting in softer sedimentary materials, enhancing instability.[4] In terms of scale, small scarps may span mere meters in height from localized faulting or erosion, whereas large escarpments extend for kilometers, often as broad tectonic or erosional features separating plateaus from plains.[26]Physical Characteristics
Height and Structure
Cliffs display significant variations in height, ranging from a few meters for small river or coastal bluffs to over 1,000 meters for extreme vertical drops in mountainous terrain, such as the 1,250-meter sheer face of Mount Thor in Canada.[1][27] These variations are primarily influenced by geological factors including rock type and resistance to erosion, tectonic uplift that elevates landmasses, and the underlying formation processes, with tectonic cliffs often achieving greater heights than those formed solely by erosion. For instance, resistant igneous rocks like basalt support taller structures compared to softer sedimentary layers.[3] The internal structure of cliffs typically consists of layered strata, where sedimentary or igneous rocks are organized into horizontal or inclined beds separated by bedding planes that reflect depositional history.[28] Joints and fractures, formed as tension cracks without notable displacement, create planes of weakness that influence cliff morphology and potential failure points.[29] Overhangs develop where upper strata protrude beyond underlying layers due to differential erosion, while caves often form at the base through wave or water undercutting, and talus slopes accumulate as loose rock debris at the foot, resulting from rockfall and weathering.[1][30] Cliff height is standardly measured as the vertical distance from the base (often the toe or water level) to the crest or top edge, employing methods such as clinometer readings for angles combined with distance measurements via trigonometry, or advanced techniques like LiDAR and GPS surveys for precise topographic profiling.[31][32] Structural integrity is assessed through indicators like the dip—the maximum angle of rock layer inclination relative to horizontal—and the strike—the compass direction of the horizontal line along the layer's intersection with a plane— which reveal orientation and potential stability risks from misalignment with erosive forces.[29][3]Erosion and Stability
Cliff erosion primarily occurs through a combination of subaerial weathering processes and external forces that progressively weaken and remove material from the cliff face. Physical weathering, such as wetting-drying cycles, salt crystallization, and freeze-thaw action, breaks down rock into smaller fragments, while chemical weathering dissolves minerals, particularly in sedimentary formations. Rainfall exacerbates these processes by promoting sheet erosion, forming gullies and rills, and increasing groundwater saturation, which can trigger landslides during intense or prolonged events. Seismic activity further contributes by inducing ground shaking that dislodges blocks and amplifies instability, with earthquakes accounting for significant portions of retreat in tectonically active regions, such as up to 57% of cliff-top retreat over 72 years along parts of the New Zealand coast. For soft rock sea cliffs, typical annual retreat rates range from 0.3 to 1.0 meter, though these vary by location and material strength, with higher rates during episodic events like storms.[3][3][3][33][3] Several factors influence cliff stability, determining the rate and likelihood of collapses. Vegetation plays a key role by anchoring soil and rock through root systems, which enhance cohesion and reduce surface erosion, particularly on upper slopes. Rock cohesion, dictated by the material's inherent strength—such as the binding properties of clay-rich sediments versus loose sands—resists breakdown, with more cohesive formations exhibiting lower retreat rates. Groundwater levels critically affect durability; elevated pore pressures from seepage or saturation diminish effective stress on the slope, promoting failure along joints or bedding planes. Common triggers for collapses include intense storms that combine high rainfall with wave undercutting at the base, and seismic events that exploit pre-existing weaknesses, leading to rapid mass movements like rockfalls or slumps.[3][3][3][3] Monitoring and predicting cliff stability involves assessing slope conditions to forecast potential failures without relying on complex computations. Basic slope stability analysis evaluates factors like material strength, water content, and slope angle through geotechnical surveys and field observations to identify vulnerable zones, such as those with high groundwater or weak cohesion. Techniques like LiDAR, aerial photogrammetry, and historical mapping track retreat over time, revealing patterns of episodic erosion rather than uniform rates. Probabilistic approaches, such as Monte Carlo simulations, estimate future retreat distances by incorporating variability in wave impact and rainfall. Historical examples illustrate these dynamics: in 1996, a Maine cliff experienced 180 meters of erosion in a single day from a storm-induced landslide, destroying two houses; similarly, the 1989 Loma Prieta earthquake triggered widespread failures along California's northern Monterey Bay cliffs, damaging homes and infrastructure.[3][3][3][3][3][3]Notable Examples
Largest Cliffs
The largest cliffs are typically measured by their pure vertical drop—the uninterrupted perpendicular distance from the highest point of the overhanging lip to the base—rather than total elevation or sloped relief, as this metric highlights extreme steepness suitable for climbing or geological study.[27] Alternative criteria include nearly vertical face height (allowing slight inward or outward lean up to 15 degrees) or overall face area for massive walls, though pure drop remains the standard for global records.[34] These distinctions arise because many high-relief faces, like the Rupal Face of Nanga Parbat at over 4,500 meters of total south-face rise, include gentler slopes that reduce effective verticality.[35] Mount Thor in Auyuittuq National Park, Baffin Island, Canada, holds the record for the world's greatest pure vertical drop at 1,250 meters (4,101 feet), measured along its west face, which overhangs at an average 105-degree angle with a 15-degree lip protrusion.[27] This granite monolith, part of the ancient Canadian Shield formed 3.5 billion to 570 million years ago, was sculpted by repeated glacial plucking during the Pleistocene, where ice sheets quarried resistant Precambrian rock, leaving sheer faces unsupported by softer surrounding material.[27] Such glaciated igneous formations in Arctic regions enable these extremes, as the hard rock withstands erosion while valleys deepen below.[36] The Great Trango Tower in Pakistan's Karakoram Range features the tallest nearly vertical drop at 1,340 meters (4,396 feet) on its east face, a granite wall rising from the Baltoro Glacier that challenges the pure-drop record due to its minimal 5-10 degree variance from vertical.[34] Composed of durable Karakoram batholith granite intruded during the Himalayan orogeny, its face formed through tectonic uplift and freeze-thaw fracturing, amplified by high-altitude weathering in a non-glaciated but arid, erosive environment.[35] This combination of resistant rock and structural integrity allows vast, unbroken expanses uncommon in more weathered ranges. In Europe, the Troll Wall (Trollveggen) in Norway's Romsdalen Valley stands as the tallest vertical rock face at 1,000 meters (3,281 feet) of near-perpendicular gneiss, overhanging up to 50 meters at its crest and rising abruptly from the valley floor.[37] Its metamorphic gneiss, derived from Caledonian orogeny rocks hardened over 400 million years ago, was sharpened by Quaternary glaciations that carved the fjord-like valley, exposing a uniform, fracture-resistant slab ideal for extreme scale.[37] Like Mount Thor, this glaciated setting in resistant crystalline bedrock underscores why northern latitudes host many superlative cliffs, where ice action preferentially erodes weaker strata to isolate towering walls.[34]Famous Cliffs
The White Cliffs of Dover in England hold profound historical and symbolic importance, particularly during World War II, when they served as a frontline defense and a beacon of hope for British forces.[38] In 1940, during the Dunkirk evacuation, the cliffs provided a reassuring sight for over 338,000 Allied troops rescued from the beaches of northern France, embodying resilience amid invasion threats.[39] Their cultural resonance extends to literature, as William Shakespeare's King Lear features the cliffs of Dover in a pivotal scene where the blinded Earl of Gloucester contemplates suicide, symbolizing despair and redemption; a nearby promontory is even named Shakespeare Cliff in tribute.[39] The Cliffs of Moher in Ireland are celebrated for their role in folklore and as a major tourist destination, drawing inspiration from ancient myths and modern media. Local legends associate the cliffs with tales of mermaids, enchanted beings, and lost lovers, rooted in the site's ancient fort of Mothar, which lends its name to the landscape.[40] These stories have permeated Irish cultural heritage, influencing poets and musicians for generations, while the cliffs' dramatic presence has appeared in films like Harry Potter and the Half-Blood Prince (2009), enhancing their global allure.[41] El Capitan in Yosemite National Park, United States, gained fame through its pioneering role in rock climbing history, marking a milestone in exploratory achievement. On November 12, 1958, climbers Warren Harding, Wayne Merry, and George Whitmore completed the first ascent of the Nose route after 47 days of effort, using innovative aid techniques that pushed the boundaries of big-wall climbing.[42] This feat, led by Harding, transformed El Capitan from an unclimbed monolith into an iconic challenge, inspiring subsequent generations of adventurers and documented in works like the 2018 film Free Solo.[43]Regional Distribution
Africa
Africa's cliffs exhibit remarkable geological diversity, shaped by tectonic rifting, volcanic activity, and prolonged arid erosion across the continent's varied landscapes. In East Africa, the Great Rift Valley features prominent escarpments formed by faulting along the East African Rift System, which initiated during the Miocene epoch around 23-5 million years ago, leading to significant crustal uplift and the creation of steep scarps that define the valley's boundaries.[44] These rift-related cliffs, often fault scarps, contrast with volcanic formations in other regions, highlighting the interplay of extensional tectonics and magmatism.[45] The Drakensberg in South Africa stands as a premier example of basaltic cliffs, where a thick layer of erosion-resistant basalt, up to 1,500 meters thick, caps the escarpment and rises to elevations exceeding 3,000 meters, resulting from Jurassic flood basalts that were later uplifted and dissected.[46] In Ethiopia's Simien Mountains, dramatic escarpments reach heights of about 1,500 meters, formed from Miocene basaltic lavas that have been deeply incised by fluvial and periglacial processes, creating sheer cliffs and pinnacles along the northern edge of the Ethiopian Highlands.[47] Further north in the Sahara, the Hoggar Mountains of Algeria showcase volcanic cliff formations, with basalt flows and ring dikes eroded into steep scarps and plugs, remnants of Cenozoic alkaline volcanism on a Precambrian basement swell.[48] Regional variations underscore the continent's tectonic history, particularly the Miocene uplift associated with the Afar hotspot and rift propagation, which elevated plateaus and exposed cliff faces across East Africa, including the Ethiopian Plateau's margins.[49] In southern and northern Africa, volcanic influences dominate, as seen in the Karoo basalts of the Drakensberg and the Hoggar's intrusive features, both contributing to the stability and prominence of these cliffs. Arid erosion patterns, prevalent in the Sahara and Kalahari margins, enhance cliff development through wind abrasion and differential weathering, sculpting jagged profiles in sandstone and basalt exposures that resist mechanical breakdown in hyper-arid conditions.[45] This combination of volcanic resilience and erosional sculpting results in some of Africa's most enduring cliff landscapes.Americas
In North America, cliffs are prominently featured in the Yosemite Valley of California, where massive granite faces such as El Capitan and Half Dome rise sheerly up to 3,000 feet (914 meters) above the valley floor, formed from durable granitic rock that resists erosion and preserves bold vertical forms.[50] These granite cliffs dominate the park's geology, comprising nearly the entire landscape within its boundaries and resulting from the interplay of intrusive igneous activity and subsequent glacial sculpting.[51] Further north, the Canadian Rockies exhibit dramatic scarps and cliffs composed primarily of sedimentary rocks like limestone and shale, thrust upward along northeast-southwest trending faults that create steep, cliff-forming carbonates from Cambrian to Devonian periods.[52] A notable example is Angel's Landing in Zion National Park, Utah, a narrow sandstone fin protruding 1,488 feet (454 meters) above the valley floor to an elevation of 5,790 feet (1,765 meters), showcasing the region's layered Navajo Sandstone formations exposed by erosional processes.[53] In South America, the Andes host extensive escarpments, particularly in Peru's Cordillera Blanca, the highest tropical mountain range with over 33 peaks exceeding 18,000 feet (5,500 meters) and numerous glacial features that contribute to steep, fault-bounded cliffs along the Cordillera Blanca fault zone.[54] This range, spanning 200 kilometers, features rugged escarpments shaped by tectonic uplift and glacial retreat, with prominent faces on peaks like Huascarán rising sharply from surrounding valleys.[55] In Venezuela, the tepuis of the Guiana Highlands, such as Auyán-tepui, present isolated table-top mountains with precipitous quartzite cliffs dropping up to 1,000 meters (3,280 feet) from summits reaching 2,450 meters (8,040 feet), creating near-vertical walls that isolate unique summit ecosystems.[56] Northern American cliffs owe much of their form to glacial carving during the Pleistocene, where ice masses excavated U-shaped valleys and accentuated vertical faces in resistant bedrock like Yosemite's granite and the Rockies' carbonates.[50] In contrast, southern formations arise from subduction zone tectonics, as the Nazca Plate converges with the South American Plate at rates of 6-10 centimeters per year along the Peru-Chile Trench, driving crustal shortening and uplift that builds the Andean escarpments and tepui margins.[57] Historical explorations in the 19th century illuminated these features; in Yosemite, the Mariposa Battalion first entered the valley in 1851, documenting its towering cliffs, while Joseph Walker approached the brink in 1833.[58] The Palliser Expedition (1857-1860) mapped Canadian Rockies scarps for potential settlement, and botanists like Robert Schomburgk ascended tepuis such as Roraima in 1842, revealing their sheer drops; meanwhile, mid-century Andean surveys by Peruvian and international teams began systematic charting of Cordillera Blanca escarpments.[59][60]Asia
Asia's cliffs are predominantly shaped by the continent's intense tectonic activity and monsoon climate, resulting in dramatic orogenic and coastal landforms that reflect ongoing plate collisions and seasonal erosion processes. The Himalayan range exemplifies this through steep faces formed by the India-Eurasia collision, which began approximately 50 million years ago and continues to drive uplift. Monsoon rains exacerbate erosion on these slopes, carving vertical escarpments from resistant bedrock.[61][62] A prominent example is the Rupal Face of Nanga Parbat in the western Himalayas, rising about 4,500 meters from base to summit, formed from gneiss and granitic rocks exposed by rapid tectonic uplift. Pleistocene uplift phases, particularly from around 1 million years ago, intensified incision and cliff development across the Himalayan syntaxis, with fluvial and glacial processes contributing to their steepness. In contrast, China's Danxia landforms, such as those in Zhangye National Geopark, consist of layered red sandstone cliffs up to 300 meters high, sculpted by differential erosion of Mesozoic continental deposits during uplift and monsoon weathering.[1][63][64] Japanese sea cliffs, like the 257-meter Matengai Cliff on Oki Islands, highlight coastal features eroded by Pacific waves and typhoon-driven storms, often exposing layered volcanic and sedimentary rocks from the archipelago's subduction zone geology. These cliffs differ from the monolithic Himalayan types, which derive from massive crystalline basement rocks resistant to layering, whereas Danxia and Japanese examples showcase stratified sedimentary sequences that promote stepped or colorful profiles through selective erosion. Such variations adapt cliff types to Asia's diverse geology, from collisional orogens to island arc margins.[65][66]Europe
Europe's cliffs exhibit a diverse array of formations shaped predominantly by post-glacial rebound, marine erosion, and tectonic stability following the Pleistocene Ice Age, resulting in stabilized landscapes that contrast with more dynamic global counterparts.[67] In northern and western regions, fjord walls and coastal escarpments reflect intense glacial carving, while southern Mediterranean and Alpine areas feature karstic dissolution and chalky outcrops influenced by temperate climates. These features have evolved over millennia, with human activities further altering edges through quarrying and stabilization efforts.[68] Prominent examples include the Cliffs of Étretat in Normandy, France, renowned for their dramatic white chalk formations rising up to 100 meters, formed from Upper Cretaceous sediments deposited in ancient marine environments and sculpted by wave erosion into natural arches and pinnacles like L'Aiguille.[69] These Coniacian-age chalk cliffs, part of the Alabaster Coast, exemplify post-orogenic uplift and differential erosion in a temperate setting, where softer chalk layers erode faster than overlying harder limestones.[70] Further north, the Black Cuillin in Scotland's Highlands on the Isle of Skye present steep, jagged basalt and gabbro cliffs up to 1,000 meters, remnants of a Tertiary igneous intrusion from 60 million years ago, where glacial polishing during the Ice Age enhanced their sheer faces and corries.[71] These dark, rough-textured outcrops provide exceptional grip for climbers due to the crystalline gabbro structure.[72] In the Mediterranean, the calanques of southern France and Spain, such as those near Cassis and Marseille, consist of narrow, steep-walled limestone inlets carved from Jurassic and Cretaceous carbonates, forming a karstic coastline through fluvial incision followed by marine flooding after the Last Glacial Maximum.[73] These white cliffs, often exceeding 300 meters in height, result from tectonic uplift of the Provence fold belt and subsequent dissolution in a semi-arid climate, creating inaccessible coves with minimal soil cover.[74] Regional specifics highlight the role of Ice Age glaciation in Norway's fjord walls, where Pleistocene ice sheets eroded pre-existing valleys to depths of over 1,000 meters, leaving sheer granitic and metamorphic cliffs that were later submerged during post-glacial sea-level rise around 10,000 years ago.[67] In the Alps, karst cliffs like those in the Northern Limestone Alps and Totes Gebirge plateau feature dolomitic and calcitic escarpments shaped by dissolution along joints, with examples such as the Rofan massif showcasing high-altitude pavements and deep shafts from Miocene limestones.[75] Historical records indicate varying erosion rates in European coastal cliffs, with sites like England's Holderness Coast experiencing approximately 2 meters per year since Roman times, driven by soft boulder clay retreat that has submerged over 30 villages.[76] Temperate weathering processes, including freeze-thaw cycles and salt crystallization in intertidal zones, contribute to this retreat, particularly on chalk and limestone faces where rates average 0.04 to 0.4 meters annually in areas like the Cantabrian coast.[77] Human modifications, such as 19th-century beach mining and modern groynes along soft cliffs in southern England, have accelerated localized erosion by reducing sediment supply, while stabilization measures like rock armor in Italy's Marche region aim to mitigate wave undercutting.[78] Stability issues in coastal Europe, including increased retreat from storm surges, underscore the need for integrated conservation amid ongoing temperate climatic influences.[79]Oceania
Oceania's cliffs are predominantly shaped by volcanic activity, tectonic uplift, and marine erosion in isolated island settings, distinguishing them from continental formations elsewhere. The region's geology features dramatic sea cliffs rising from fjords, escarpments, and atoll perimeters, often resulting from Holocene and Pleistocene processes along the Pacific Ring of Fire.[80] Volcanic collapses and coral limestone accumulations contribute to their steep profiles, with many formed during post-glacial sea-level rise and plate boundary interactions.[3] In New Zealand's Fiordland, fjord-side cliffs exemplify glacial and tectonic sculpting, with walls reaching 1,500–2,000 meters in height along sites like Milford Sound. These formations originated from Quaternary glaciations that deepened pre-existing valleys in uplifted gneissic rocks, following 1,000–3,000 meters of elevation gain over the past 7 million years due to subduction along the Australia-Pacific plate boundary.[80] The sheer faces, among the world's highest sea cliffs, drop directly into fjord waters up to 420 meters deep, enhanced by extreme annual rainfall exceeding 7 meters that feeds hanging valley waterfalls.[80] Australia's Great Escarpment includes the Bunda Cliffs along the Nullarbor Plain, where limestone scarps plunge 60–120 meters into the Great Australian Bight over a 120-kilometer stretch. These coastal features formed through regressive erosion of the elevated Nullarbor Plateau, a remnant of ancient marine sedimentation from the Eocene to Miocene epochs, with wave action undercutting the base to maintain their verticality.[81] Hawaiian sea cliffs, such as those on Molokaʻi, highlight volcanic collapse mechanisms, with faces rising over 900 meters along the north shore. The Kalaupapa cliffs resulted from a massive landslide about 1.5 million years ago, when the northern third of East Molokaʻi Volcano sheared off, creating a debris field that triggered one of Earth's largest tsunamis while exposing basaltic post-eruption faces.[82] Similar profiles occur on Kauaʻi and the Nā Pali Coast, eroded by Pleistocene stream incision and Holocene wave action on shield volcano remnants. Coral limestone cliffs characterize many Pacific atolls and raised islands, as seen in Niue, where steep coastal escarpments up to 60 meters border a central plateau. Niue's formations stem from an uplifted Miocene coral atoll, with karstic erosion dissolving the porous limestone to form chasms and caves while preserving sheer drop-offs from tectonic uplift and solution processes over the past 2–3 million years.[83] In Palau's Rock Islands, similar coralline limestone rises create rugged, mushroom-shaped outcrops from ancient reef buildup atop volcanic cores during the Oligocene.[84] Volcanic collapses remain a key regional specific, often post-dating shield-building eruptions in the Holocene, as evidenced by submerged sea cliffs around remnant volcanoes like West Molokaʻi.[85] These events expose fresh, unstable faces prone to further marine undercutting. Tsunami-influenced coastal profiles add uniqueness, with ancient waves depositing boulders atop Tongan cliffs—such as a 1,200-tonne boulder over 30 meters above sea level from a ~7,000-year-old event—sculpting irregular notches and amplifying erosion in low-lying island margins.Ecological Role
Flora Habitats
Cliffs provide harsh yet specialized habitats that foster unique plant communities adapted to extreme conditions such as limited water, high winds, intense sunlight, and unstable substrates. These environments often support rare and endemic species that thrive in niches unavailable elsewhere, contributing significantly to regional biodiversity.[87] Plants on cliffs exhibit remarkable adaptations to survive drought and mechanical stress. Many species, including ferns like the smooth cliff brake (Pellaea glabella), develop drought-resistant fronds with waxy coatings and small, clustered leaves that minimize water loss while anchoring into rocky crevices via shallow rhizomes.[88] In alpine regions, plants such as edelweiss (Leontopodium nivale) feature dense, woolly hairs on leaves and stems to protect against desiccation, cold, and UV radiation, alongside robust root systems that secure them against strong winds on exposed slopes.[89] These adaptations enable cliff-dwelling plants to endure seasonal aridity by restricting growth and reproduction to brief favorable periods, often relying on wind-dispersed seeds for colonization.[90] Habitat niches on cliffs vary distinctly between exposed faces and shaded ledges, influencing species composition. Exposed rock surfaces favor sun-tolerant, stress-resistant perennials with thick cuticles and reduced leaf sizes, while shaded crevices and overhangs support moisture-retaining species like mosses and shade-adapted ferns that exploit higher humidity.[91] Sea cliffs, in particular, serve as biodiversity hotspots, harboring endemic plants such as Cheirolophus crassifolius on coastal limestone formations, where salt spray and erosion create isolated refugia for specialized halophytic flora.[92] Following erosion events, plant succession on cliffs proceeds slowly in a primary sequence starting with pioneer lichens and crustose species that weather rock and accumulate organic matter.[93] This is followed by colonization from vascular plants like ferns and cushion-forming perennials, which stabilize substrates and facilitate mat-forming shrubs over decades, though nutrient-poor soils often limit progression to climax communities.[94] Invasive plants pose significant threats to native cliff flora by outcompeting adapted species for scarce resources and altering microhabitats. Non-native invaders, such as certain grasses and shrubs, can rapidly colonize crevices post-disturbance, reducing native diversity and hindering succession in vulnerable ecosystems like Mediterranean sea cliffs.[95]Fauna Habitats
Cliffs offer specialized habitats for diverse fauna, particularly those adapted to vertical terrains that provide safety from predators and access to resources. Seabird colonies dominate coastal cliffs, with species like the Atlantic puffin (Fratercula arctica) excavating burrows in grassy slopes and the common guillemot (Uria aalge) occupying narrow ledges. These formations allow dense aggregations, for example, in the UK, where approximately 922,000 common guillemots (as of 2023) breed on coastal cliffs, representing about 22% of the Northeast Atlantic population.[96] In arid regions, reptiles such as the chuckwalla lizard (Sauromalus ater) thrive on desert scarps, utilizing rocky crevices and outcrops for shelter. Mammals like the mountain goat (Oreamnos americanus) also exploit steep cliff faces in alpine areas, scaling near-vertical surfaces to forage and rest.[97][98] Behavioral adaptations among cliff-dwelling animals emphasize nesting and roosting in elevated, inaccessible sites to reduce predation pressure. Seabirds nest on sheer ledges that deter terrestrial mammals like foxes, while their single-egg clutches or burrow systems further minimize vulnerability during incubation. Mountain goats leverage their agility on precipitous drops, with specialized hooves featuring rough pads and flexible dewclaws for secure footing, enabling quick escapes from threats. Chuckwalla lizards employ a defensive inflation of their bodies to lodge firmly in fissures, deterring attackers in exposed scarps. These strategies allow fauna to persist in otherwise hostile environments, where sparse vegetation occasionally provides incidental cover or supplementary food like lichens for grazing species.[99][98][97] Foraging behaviors in cliff habitats are closely linked to structural features like height and exposure, influencing efficiency and range. Seabirds from elevated cliffs benefit from stronger updrafts for launching into marine foraging grounds, pursuing fish schools offshore via plunge-dives or surface pursuits. Raptors, such as peregrine falcons, hunt along cliff edges, using the vantage for spotting prey mid-flight. Population scales underscore habitat value; UK seabird colonies, including around 922,000 guillemots and approximately 580,000 pairs of puffins (as of recent estimates), sustain regional biodiversity through nutrient cycling from marine-derived guano.[96][100] However, recent threats like highly pathogenic avian influenza (HPAI) outbreaks in 2022-2023 have led to substantial declines in these populations, with some colonies experiencing 20-50% mortality as of 2025.[101] Certain migratory species, including soaring raptors, follow cliff lines and ridges as routes, exploiting thermal currents for energy-efficient long-distance travel during seasonal movements.[102][103][104]Human Interactions
Recreational Uses
Cliffs serve as prime locations for a variety of recreational activities that attract adventure enthusiasts worldwide. Rock climbing stands out as one of the most prominent pursuits, encompassing techniques from short bouldering sessions to multi-day big wall routes that ascend sheer faces using ropes, harnesses, and protection gear.[105] Paragliding leverages the strong updrafts along cliff edges for foot-launched flights, allowing pilots to soar over landscapes for extended periods.[106] Hiking trails along cliff rims provide accessible yet exhilarating experiences, with paths like the Rim Trail in Grand Canyon National Park offering expansive views while following the contours of dramatic drop-offs.[107] The historical development of cliff-based recreation began with 19th-century alpinists who pioneered ascents during the golden age of alpinism from 1854 to 1865, scaling peaks and cliffs in the European Alps with rudimentary equipment and guides.[108] By the 1970s, innovations in climbing gear—such as nuts and spring-loaded camming devices—facilitated the shift toward free climbing, emphasizing technique and physical prowess over artificial aids, as exemplified in routes on cliffs like those in Yosemite.[109] These activities drive substantial economic benefits through tourism. Visitors to the Southeast Utah Group of national parks, including areas like Arches National Park near Moab, Utah, spent $397.6 million in 2023, supporting 5,122 jobs and generating $486.1 million in economic output in the region.[110] Annual climbing festivals amplify this impact; for example, Utah's Joe's Valley Bouldering Festival has been recognized for boosting local economies through participant expenditures on lodging, gear, and services.[111]Hazards and Conservation
Cliffs present significant hazards to human visitors, primarily through rockfalls, falls from heights, and, in regions with seasonal snow cover, avalanches. Rockfalls occur when loose rocks detach from cliff faces due to weathering, seismic activity, or freeze-thaw cycles, posing risks to hikers, climbers, and nearby infrastructure. In Yosemite National Park, rockfalls happen year-round with an average frequency of one event every five days, resulting in at least 18 fatalities and over 100 injuries historically, including events up to 2022. Erosion processes exacerbate cliff instability, contributing to the frequency and scale of these rockfalls by progressively weakening rock structures over time. Globally, non-seismic rockfalls have caused hundreds of deaths; for instance, an inventory of events in Spain from 1803 to 2021 documented 577 fatalities and 266 injuries, highlighting the widespread danger in cliff-prone areas.[112] Falls from heights represent another major risk, particularly during recreational activities like climbing near cliff edges. In the United States, rock climbing incidents contribute to approximately 20-30 annual fatalities across North America, with leader falls and ground falls accounting for a significant portion of these deaths, as reported by the American Alpine Club's Accidents in North American Climbing database from 2003 to 2021. Avalanches, though less common on sheer cliffs, can occur in alpine environments where snow accumulates on steep faces, leading to rapid slides that endanger mountaineers; summer avalanches alone have caused multiple fatalities in high-mountain regions like the Rockies. A notable incident was the November 16, 1980, rockfall on the upper Yosemite Falls Trail, which killed three hikers and injured 19 others, prompting immediate trail closure for eight months to clear debris and stabilize the slope. More recently, a December 2022 rockfall on the Four Mile Trail killed two hikers and injured others, leading to temporary trail closures.[113] Conservation efforts for cliffs focus on mitigating these hazards while preserving geological integrity, often through designation as protected areas. Many prominent cliff formations are safeguarded within national parks, such as Yosemite National Park in the United States, a UNESCO World Heritage Site since 1984 that encompasses iconic granite cliffs and implements strict visitor management to reduce human-induced risks. Erosion control measures include installing wire mesh netting or cable systems to catch falling rocks and stabilize slopes, as well as replanting native vegetation to bind soil and prevent further degradation; these techniques have been applied in U.S. national parks to protect both visitors and natural features. Legal frameworks, including UNESCO designations, enforce international standards for site protection, prohibiting activities that accelerate erosion or instability. In response to major incidents, policies have evolved to enhance safety. Following the 1980 Yosemite rockfall, the U.S. Geological Survey expanded monitoring programs, leading to improved hazard mapping. The 1996 Happy Isles rockfall in Yosemite, which killed one person and injured eight, spurred advanced modeling for rockfall prediction and trail rerouting. In the 2000s, after multiple rockfalls at Curry Village in 2008 that damaged structures and injured three individuals, the National Park Service realigned rockfall hazard zones, demolished at-risk buildings, and introduced stricter access regulations to limit exposure in high-risk areas. These measures, combined with ongoing geological assessments, have reduced fatalities while balancing conservation with public access.References
- https://www.coastalwiki.org/wiki/Rocky_shore_morphology
- https://en.wiktionary.org/wiki/cliff
- https://phys.org/news/2025-05-boulder-inland-pacific-tsunami-history.html