Hubbry Logo
CatboatCatboatMain
Open search
Catboat
Community hub
Catboat
logo
8 pages, 0 posts
0 subscribers
Be the first to start a discussion here.
Be the first to start a discussion here.
Catboat
Catboat
Catboat
View on Wikipedia
from Wikipedia
Winslow Homer's 1870s painting Breezing Up (A Fair Wind)

A catboat (alternate spelling: cat boat) is a sailboat with a single sail on a single mast set well forward in the bow of a very beamy and (usually) shallow draft hull. Typically they are gaff rigged, though Bermuda rig is also used. Most are fitted with a centreboard, although some have a keel.[1] The hull can be 3.7 to 12.2 metres (12 to 40 ft) long with a beam half as wide as the hull length at the waterline.[2] The type is mainly found on that part of the Eastern seaboard of the USA from New Jersey to Massachusetts.[3]: 92 

Advantages of this sail plan include the economies derived from a rig with a limited number of component parts. It is quick to hoist sail and get underway. The cat rig sails well to windward, especially in calmer water. As a working boat, the forward mast placement gave ample room in the cockpit for fishing gear. Cruising versions can provide a large usable cabin space in a relatively short hull.[4]: 92-93 [5]: 7 

Disadvantages of the rig include the limited deck space around the mast, which can be problematical when raising or lowering sail, or when reefing; halyards are often led back to the cockpit, so partially mitigating this problem. It is usually wise to reef early in a rising wind to avoid an excess of weather helm. The weight of the mast in the bow has to be allowed for in the hull design – if this is got wrong the bow may be "buried" when sailing downwind. The narrow beam where the mast is stepped makes it difficult to gain any benefit from shrouds, so the mast has to be stronger, and so heavier. Despite the simplicity of the rig, a good level of skill is required to design a balanced catboat, since there are limited options to correct any slight errors.[4]: 92–93 

Some catboat one-design classes in current use include the Beetle Cat, the Redden Catboat,[6] the Nonsuch, the Inland Cat, the Zijlsloep,[7] the Cape Cod Cat,[8] Com-Pac Trailerable,[9] Marshall,[10] Menger,[11] and the APBY cat boat.[12]

From the 1850s to the early 1900s catboats were the dominant inshore boat on the New England coast, both for work and for pleasure.[2] They were used for fishing and coastal transportation. Their popularity declined in the commercial world where they were replaced by motorized boats. In boat racing the tendency was for larger sails, which favored other rigging styles.[13]

A typical New England style has a very long boom that extends over the transom and may carry foresails stayed from a bowsprit.[14]

History

[edit]

Around the turn of the 20th century, catboats were adapted for racing, and long booms and gaffs, bowsprits and large jibs were fitted to capture as much wind as possible. The decline of racing and advent of small, efficient gasoline engines eliminated the need for large sail plans, and catboats today are used as pleasure craft for day sailing and cruising, and have the virtues of roominess, stability and simple handling.

It is generally accepted[according to whom?] that the origin of the catboat type was in New York around 1840 and from there spread east and south as the virtues of the type — simplicity, ease of handling, shallow draft, large capacity — were discovered. Historically, they were used for fishing and transport in the coastal waters around Cape Cod, Narragansett Bay, New York and New Jersey. Some were fitted with bowsprits for swordfishing and others were used as 'party boats' with canvas-sided, wood-framed summer cabins that could be rolled up.

The Breck Marshall, a 20-foot (6.1 m) Crosby catboat design open for public use at Mystic Seaport

One of the most well-known catboats is the 12-foot (3.7 m) Beetle Cat daysailer. Fleets of these one-design boats are found in harbors all across New England, often competing in races. In the 1960s, Breck Marshall based his 18-foot (5.5 m) fiberglass Sanderling upon an existing, wooden design. The Sanderling has since become a very popular boat, with more than 700 built, and it has helped to rekindle interest in the catboat. To honor Marshall and his contribution to the type, the Catboat Association funded the construction of the Breck Marshall, a 20-foot (6.1 m) catboat built and berthed at Mystic Seaport.

Features

[edit]

Designer Fenwick Williams summarized the original design philosophy as: "The ample beam made the use of stone ballast feasible … the high bow provided good support for the unstayed mast … the barn door rudder provided adequate strength … high coamings served to keep water out of the large open cockpit … side decks provided a handy ledge on which to set a lobster trap."[15]

Modern catboat fans appreciate the catboat's traditional design and classic appearance and the features that make it a versatile recreational boat: simplicity, large capacity, shallow draft, stability, and safety in a boat that is easy to sail.[15]

Catboats in Europe

[edit]

Great Britain and Ireland

[edit]

In 1851, during the Great Exhibition, a Catboat called 'The Una' was put on display at The Serpentine lake in Hyde Park, London. She was seen by Dixon Kemp who was much impressed with her. After 'Una' sailed at Cowes on the Isle of Wight, she impressed many of the sailors who built a fleet of them. After 1907 'Una' raced at the Upper Thames yacht Club.[16]

In Bray, County Wicklow in Ireland a fleet of one-design catboats, 3.7 m (12 ft) in length and 1.8 m (6 ft) beam were designed and built in 1897, and they continued to race for several years at home and at local east coast regattas.[16]

[edit]
  • Cruising catboat showing classical rudder design and wire stays supporting the mast
    Cruising catboat showing classical rudder design and wire stays supporting the mast
  • Painting "Oyster Bay Catboats" (circa 1865) by Archibald Cary Smith
    Painting "Oyster Bay Catboats" (circa 1865) by Archibald Cary Smith
  • Catboats with Bermuda rig
    Catboats with Bermuda rig

See also

[edit]
  • Beetle Cat, a small "daysailer" catboat
  • Nonsuch, a series of 5.5–11.0 m (18–36 ft) modern catboats
  • Inland Cat, 4.4 m (14+1⁄2 ft), designed and built in Northern Indiana.
  • Snark sailboat, a lightweight, two-person catboat

References

[edit]

Further reading

[edit]
[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Catboat

View on Grokipedia
from Grokipedia
A catboat is a type of characterized by a single mast positioned well forward near the bow, supporting a single large , typically with a wide beam and shallow draft for stability and access to shallow waters. Originating in the mid-19th century in regions such as , , and , catboats evolved from earlier sloop-rigged workboats into versatile vessels suited for fishing, passenger ferries, and transporting goods. Builders like the Crosby family in Osterville, , constructed some of the earliest models around , initially as practical 14-foot workboats with minimal . By the late , larger "sandbagger" catboats (20-26 feet) emerged for racing, using for speed, while recreational designs by naval architect Nathanael G. Herreshoff, such as the 1889 Newport boat Iris, popularized them for leisure sailing. In areas like , , catboats became essential for local commerce, leading to organized racing fleets at clubs like the Bay Head Yacht Club, established in 1888. Key design features include a beamy hull—often half the waterline length—for inherent stability without heavy , a retractable centerboard amidships for draft reduction to as little as 1-2 feet, and a large gaff-rigged that simplifies handling with just one and no stays. Traditional wooden construction used materials like cedar, , , and , requiring about 5,000 man-hours per boat, though modern models, pioneered by Marshall Marine in 1962 with the , offer durability and easier maintenance. Sizes generally range from 14 to 28 feet, with rigs evolving from gaff to Marconi for improved performance in racing classes like A-Cats (28 feet, 600 square feet of ) and B-Cats. In contemporary use, catboats remain popular for daysailing, family cruising, and competitive racing due to their seaworthiness in varied conditions, spacious cockpits, and straightforward operation, with over 860 Sanderlings and similar models produced since the mid-20th century. Organizations like the Catboat Association preserve their legacy, emphasizing their transition from rugged workhorses to enduring symbols of simple, stable sailing.

History

Origins in the 19th Century

The catboat emerged in the mid-19th century as a utilitarian workboat in the , primarily designed for , oystering, and coastal transport in shallow waters. These vessels were particularly suited to the demanding conditions of regions such as , , and , where their shallow draft allowed access to oyster beds and fishing grounds inaccessible to deeper-keeled boats. The design of early catboats likely drew influences from Dutch or English flat-bottomed boats, which were common in colonial trade and , adapting their broad, stable forms to local needs for beaching and quick maneuvers. The origin of the name "catboat" remains uncertain, though it is often linked to the vessel's cat-like agility in navigating shallow, tricky waters with ease and speed. Earliest documented examples date to the , with some of the first catboats built before 1850 by Worthington and Horace Crosby, sons of Andrew Crosby, in Osterville, , initially as practical 14-foot workboats. These boats featured simple, beamy hulls without cabins, enabling rapid launching and beaching on sandy shores—a necessity for commercial operations in tidal bays. Typically measuring 15 to 25 feet in length, they were engineered for handling by one or two crew members, emphasizing simplicity and efficiency for daily tasks like hauling catches or transporting goods. By the late 19th century, the catboat's versatility began attracting recreational sailors, marking an early shift toward pleasure use.

Evolution and Key Developments

In the late 19th century, catboats began transitioning from utilitarian workboats, such as those used for fishing on , to recreational vessels favored by yachtsmen for daysailing and . This shift was driven by their simple single-sail rig, which facilitated easy handling and efficient tacking, alongside impressive windward performance. Designers refined the hull for enhanced stability and speed, incorporating a wide beam roughly half the and a firm turn to provide lateral resistance without excessive , while increasing sail area through longer booms and higher gaff peaks to capitalize on light winds common in leisure settings. A pivotal advancement occurred in 1922 when naval architect Charles D. Mower revolutionized catboat design with the A-Cat, introducing a low freeboard for reduced and improved stability, a shallow draft suited to coastal waters, and a deep centerboard to enhance hydrodynamic efficiency and performance. This configuration marked a departure from heavier, beamier workboat forms, prioritizing agility and speed for racing while maintaining the catboat's inherent seaworthiness. Mower's innovations influenced subsequent one-design classes, solidifying the catboat's role in competitive . Mid-20th-century designers further advanced catboat versatility for recreational use. In 1971, Halsey C. Herreshoff introduced the Americat, an 18-foot fiberglass model featuring distinctive stars-and-stripes sail patterns that evoked American maritime heritage, combining traditional aesthetics with modern for easier maintenance and broader accessibility. Concurrently, Charles Wittholz developed scalable catboat plans ranging from 11 to 29 feet, tailored for homebuilders using or wood-epoxy methods, enabling customized builds that emphasized , stability, and overnight cruising capability. Post-World War II, the adoption of fiberglass construction accelerated catboat popularity by offering durability, low upkeep, and potential. Breck Marshall's introduction of the fiberglass , a 17.5-foot daysailer, exemplified this trend, with over 860 units built and proven success in races that validated the material's suitability for the design's beamy, shallow-draft profile. The formation of the Catboat Association in promoted standardization, information exchange, and events, fostering a dedicated community that preserved and evolved the type for contemporary leisure .

Design Features

Hull and Keel Configurations

The catboat's hull is distinguished by its wide beam relative to overall length, often exhibiting a length-to-beam ratio of around 2:1 (or beam approximately 40-50% of length), which imparts significant form stability through hull shape alone. This broad profile not only enhances lateral resistance to heeling but also maximizes interior volume for accommodations, a feature particularly valued in early unballasted designs where spaciousness was prioritized over deep keels. Shoal drafts are a hallmark of catboat design, typically ranging from 1 to 3 feet with the centerboard or retracted, facilitating navigation in shallow bays, estuaries, and coastal waters. These retractable foils provide lateral resistance when lowered while allowing the hull to float in minimal depth, contrasting with fixed keels in some configurations that offer greater draft for better upwind performance and offshore suitability. For example, the Beetle Cat has a draft of 8 inches with the board up and 3 feet down. Traditional catboat hulls employ plank-on-frame in , yielding rounded bilges that promote a gentle, forgiving motion in choppy conditions by reducing slamming. Contemporary builds frequently utilize molded for durability and ease of maintenance. Weight distribution emphasizes a low center of gravity, often realized through internal or encapsulated lead keels, which collectively enable self-righting behavior in moderate sea states by countering capsize forces effectively. This underwater profile integrates seamlessly with the forward mast placement to balance the vessel's against hull stability.

Rigging and Sails

The catboat's is characterized by a single, unstayed mast positioned far forward near the bow, which allows for a large while maintaining balance and minimizing weather helm. This forward placement shifts the center of effort forward to align with the boat's beamy hull, ensuring neutral helm during without the need for stays or shrouds that could complicate handling. The traditional sail configuration employs a gaff rig, featuring a quadrilateral mainsail hoisted on a boom and gaff. This setup captures wind efficiently in light airs, providing ample power from the single sail without additional headsails in the purest cat-rig designs. The gaff's pivot at the mast enables easy adjustment of sail shape, contributing to the rig's simplicity and responsiveness. Running rigging remains straightforward to support single-handed operation, consisting primarily of a mainsheet led aft for trim and halyards for hoisting the gaff and peak. While some modern catboats incorporate optional jibs for versatility, the emphasis on cat-rig purity avoids complex lines, allowing quick tacks and downwind runs with minimal crew effort. Lines are often led to the cockpit for convenience, enhancing ease of use in coastal conditions. Sail materials have evolved from traditional , which offered durability but required frequent maintenance against , to modern Dacron introduced in the mid-20th century for greater strength and weather resistance. points, typically two or three sets integrated into the , are standard for handling gusty winds common in nearshore , enabling rapid reduction of sail area without excessive heeling.

Usage

Historical Roles

Catboats served primarily as versatile workboats in the shallow bays and coastal waters of the during the 19th and early 20th centuries, excelling in harvesting due to their shallow draft and beaching capability, which allowed operators to access and beds without relying on docks. Their simple gaff-rigged sail and single mast enabled quick setup and handling in daily operations, making them ideal for tonging or raking in areas like bays in and in [Rhode Island](/page/Rhode Island). These boats, often 18 to 25 feet in length, could carry substantial loads of harvested or while navigating shoals and tides effectively. In addition to shellfish work, catboats played key roles in coastal trade, passenger ferrying, and light cargo transport across New England waters from the 1850s to the 1920s, with fleets operating out of ports in Massachusetts and Rhode Island to move goods, produce, and people between islands and mainland communities. Their stability and speed under sail supported short-haul voyages, such as ferrying passengers to summer resorts or delivering market-bound cargo like fish and farm supplies, often in fleets of dozens serving local economies. Adaptations for line fishing or net deployment were common, with the boats' wide beam providing a stable platform for 1 to 3 crew members—typically a lone fisherman or small family team—to launch and recover gear easily from beaches or shallow anchorages. Commercial use of catboats began to decline after as motorized vessels offered greater reliability and speed for harvesting and trade, displacing sail-powered fleets in and operations. However, traditional workboat roles persisted in some Northeast communities into the mid-20th century, particularly for small-scale, inshore tasks where costs were prohibitive and the catboat's simplicity remained advantageous.

Contemporary Applications

In contemporary sailing, catboats have established a strong presence in recreational daysailing and family cruising, prized for their inherent stability and straightforward handling that make them ideal for novice and experienced sailors alike. Models such as the Marshall 22 pocket cruiser, typically ranging from 20 to 30 feet, incorporate compact cabins suitable for overnight trips, allowing families to explore coastal waters comfortably without the complexity of larger vessels. This simplicity, enhanced by modern construction for added durability, supports short excursions on bays and inland waterways, where the wide beam provides a secure platform for children and casual outings. Racing remains a vibrant application for catboats, with active one-design classes like the Marshall series fostering competitive yet accessible events. The 18-foot , for instance, has participated in notable regattas such as the Race to , where its robust design proved effective in challenging conditions, and handicap racing formats allow diverse fleets to compete in regional events like those hosted by the Bay Head Yacht Club. These competitions emphasize skill and over speed, attracting enthusiasts to series races that highlight the boat's balanced performance under . Catboats also serve niche roles in eco-tourism and adaptive sailing programs, offering low-impact access to sensitive coastal environments. Charter services, such as those on using restored 1920s catboats, provide private tours for small groups, promoting sustainable exploration of harbors and wildlife areas with minimal disturbance. In adaptive contexts, organizations like Duxbury Bay Maritime School and Chatham Yacht Club utilize accessible models, including the wheelchair-friendly Marshall 22, to enable sailors with disabilities to participate in therapeutic outings that build confidence and independence. The traditions of catboating are upheld through dedicated organizations like the Catboat Association, which organizes annual meetings, seminars, and regattas to promote skill-building and community. Events such as the Catboat Association Series and the association's national conference in , draw hundreds of participants for workshops on , , and , ensuring the vessel's legacy endures in modern leisure .

Variants

Traditional Catboats

Traditional catboats embody the classic designs of the 19th and early 20th centuries, characterized by simple, sturdy wooden construction that prioritizes seaworthiness and ease of handling. These vessels typically feature open layouts for day or small cuddy cabins for basic in larger models, allowing for minimalistic focused on functionality rather than luxury. Hulls are hand-built using carvel or lapstrake planking, often in white cedar for its lightweight durability or for structural strength, fastened over sawn or steamed frames to create broad, shallow forms ideal for coastal waters. Renowned boatyards like Crosby Yacht Yard and Beetle Cat exemplified this craftsmanship, producing vessels that balanced workboat utility with recreational appeal. Size ranges commonly from 12 to 25 feet in , enabling versatility from tender-like dayboats to capable cruisers. A representative example is the Crosby catboat design from the early , around 18 to 20 feet, as seen in the lines of the historic , which emphasize pure workboat aesthetics through a wide beam nearly half the length, plumb stem, and sparse deck fittings for unencumbered operation. These boats often incorporate gaff for efficient handling in variable winds. The Beetle Cat, a 12-foot model introduced in 1921, further illustrates this with its open and essential gear storage, making it a staple for family outings and racing. Preservation of traditional catboats involves dedicated efforts to maintain their wooden integrity, including participation in events like the Port Townsend Wooden Boat Festival, where restored examples are demonstrated and celebrated alongside other classic craft. Restoration techniques adhere to historical methods, such as refastening planks with treenails for flexible joints or bronze screws for secure hold, often combined with bungs to protect against and ensure watertight seams. These practices, applied by skilled builders, extend the life of aging hulls while preserving original proportions and materials. As symbols of American maritime heritage, traditional catboats hold cultural significance, representing the ingenuity of regional boatbuilding traditions and the shift from to leisure sailing. They are frequently showcased in museums, such as the Breck Marshall reproduction at Mystic Seaport Museum, which offers public sails to educate on early 20th-century designs, and historical replicas at sites like the Osterville Historical Museum, underscoring their enduring legacy in coastal culture.

Modern Interpretations

In the , catboat designs have increasingly incorporated and composite materials to reduce maintenance while preserving the vessel's classic aesthetic and seaworthiness. Manufacturers like Marshall Marine have led this shift, producing models such as the 22-foot Marshall 22, which features a solid hull with foam-reinforced decks for durability and ease of upkeep, eliminating the need for frequent varnishing or caulking associated with traditional wooden builds. The series, including the 18-foot version, similarly utilizes hand-laid construction, allowing owners to focus on sailing rather than extensive repairs, with over 860 units built since 1962 demonstrating the material's longevity in coastal environments. Modern interpretations often integrate advanced rigging and propulsion innovations to enhance cruising versatility without compromising the catboat's simplicity. Carbon-fiber masts, as seen in custom builds like Arey's Pond Boat Yard's XFC-22, provide lightweight strength and reduced , enabling easier handling and improved performance. Roller-furling sails and auxiliary outboard motors—typically 5-15 horsepower—further adapt these boats for extended day sails or short passages, offering quick deployment and reliable motoring in light winds or confined waters. Optional or fractional rigs on models like the Marshall 22 expand sail configurations for better upwind efficiency, blending gaff-rig heritage with contemporary aerodynamics. Custom builders such as Mark Ellis Design have reimagined for offshore potential by retaining elegant lines while adding deeper keels for stability. The Nonsuch 30 and 33 series, for instance, feature fin keels drawing 5 to 5.25 feet, which improve tracking and reduce weather helm compared to shallow-draft classics, making them suitable for coastal and moderate offshore voyages. These designs maintain an unstayed rig but incorporate modern hull forms with rudders for responsive steering, allowing couples or small crews to undertake longer trips with confidence. Hybrid variants cater to diverse needs, from compact trailerable daysailers under 20 feet—like the 15-foot Marshall Sandpiper, which tows easily with a hinged mast and weighs 1,050 pounds—to larger luxury cabin versions approaching 35 feet, such as the Nonsuch 33 with berths for four, a full , and enclosed head for multi-day excursions. These adaptations support everything from local gunkholing to family cruising, with some models, like the , even competing in endurance races such as the Race to to showcase their robustness.

Regional Presence

United States

The catboat emerged as a quintessential vessel in the , with its epicenter firmly rooted in , particularly and , where it became integral to both and recreational along the coastal waters. Historic boatyards in areas like , played a pivotal role in production, exemplified by the Beetle family yard, which transitioned from whaling boats to constructing the iconic Beetle Cat starting in 1921 to serve local waters and youth sailors. Similarly, , featured catboats prominently in its inshore fishing fleets during the 19th and early 20th centuries, supporting the region's maritime before larger vessels dominated. The catboat's cultural integration is evident through robust organizational support, including the Catboat Association, founded on August 18, 1962, as a nonprofit dedicated to promoting interest in catboats, facilitating information exchange, and organizing events across the U.S. This organization fosters a strong club presence, particularly in , where regional regattas thrive, such as the annual Cat Gathering at Arey's Pond Boat Yard in , drawing over 100 boats to race in and celebrate the design's legacy. Other events, like the Regatta, further highlight the catboat's role in community sailing traditions. Iconic American examples underscore the catboat's enduring appeal, notably the Beetle Cat—a 12-foot-4-inch gaff-rigged wooden boat designed in 1921 by John Beetle for family use and still in limited production today. Over 4,000 Beetle Cats have been built, many integrated into youth sailing programs for their stability and ease of handling, as seen in initiatives at clubs like Edgewood Yacht Club. Contemporary production continues in hubs like , where builders such as Marshall Marine in Padanaram craft traditional fiberglass models like the and Marshall 22, with over 1,800 units produced since 1962. In , Com-Pac Yachts (formerly ) has manufactured trailerable catboats, contributing to the design's national recreational trends. Historically, these efforts reflect broader U.S. boating patterns, with major builders like the Crosby family in Osterville, , constructing over 3,000 catboats since the mid-19th century. Early workboat roles in laid the foundation for this recreational dominance, and catboats have also found popularity in regions like the , supported by the Chesapeake Catboat Association, and historically in the for inshore sailing.

Europe

The adoption of catboats in began in the late , with early examples appearing in around the 1880s, where they were known as "Catkreuzer" and built for inland and coastal waters including areas near the . These designs, often 5 to 7.5 meters in length, featured a single mast and broad beam suited to shallow drafts, drawing inspiration from American catboat configurations that emphasized simplicity and stability in protected waters. By the early , German shipyards like Abeking & Rasmussen produced notable examples such as the 4.5-meter "Novatus" and "Krümel" in 1922, which remain in use today and highlight the type's adaptation to European conditions like those in the , where shallow waters demand versatile, low-draft vessels. In the , catboats have integrated into the tradition of flat-bottomed (platbodem) , with modern builds often hybridizing the cat rig onto broader hull forms reminiscent of traditional barges like the tjalk for enhanced stability in inland and coastal navigation. The Nederlandse Catbootclub, founded to promote the type, organizes 1-2 annual gatherings featuring diverse designs influenced by U.S. naval architects such as Phil Bolger and Charles Wittholz, including examples like the 1999 "Gooitske" and models from the 1970s. These adaptations prioritize the catboat's single-sail efficiency for the shallow Frisian and regions, where leeboards and minimal keels allow access to areas inaccessible to deeper-draft boats. Contemporary interest in catboats across is evident through small-scale imports and custom construction, particularly in , where yards like La Pabouk Compagnie in produce models such as the Pabouk Love, a compact catboat with a ballast keel designed for coastal cruising and light-air performance. These French variants, typically 5 to 7 meters, emphasize ease of handling for solo sailors and have gained traction in Mediterranean settings for their ability to perform in variable winds during informal regattas. Overall, the European catboat fleet remains niche, with active but limited communities centered on preservation and leisurely coastal use rather than competitive racing, supported by builders like Green Ocean Yachts in the .

Great Britain and Ireland

Catboats arrived in the in the mid-19th century through transatlantic connections, with the first documented example being the 12-foot Una, sent from the to in 1852 by William Buller Duncan for the Earl of Mount Charles, then Commodore of the Royal St. George in . This gaff-rigged vessel raced at in 1854 but did not spark widespread adoption, though a model of Una remains on display at the Royal St. George , symbolizing early interest in the type for local tidal waters. In , catboat construction emerged in the late , particularly in , where boatyards adapted the design for the challenging conditions of the . The Cornish Cormorant, a 12-foot (3.7-meter) dayboat designed by Roger Dongrey and built by Cornish Crabbers in , since 1984, features a high freeboard, shallow draft of 0.58 feet (0.18 meters) with the centerboard up, and a suited for family day in variable winds and waves. Its stable, beamy hull—12 feet overall with a 5-foot-6-inch beam—reflects influences from traditional American catboats but incorporates British refinements for coastal use, including easy trailering and rowing capability in light airs. Irish adaptations have emphasized practicality for sheltered and tidal sailing, such as in and nearby areas. A modern example is the 12-foot Emmeline, commissioned in 2018 and built in wooden construction by Skol ar Mor in for use off , with modifications like a 6-foot beam and simplified to handle local gusts and effectively. These boats often feature deeper effective drafts via centerboards for tidal stability, aligning with clinker-built traditions in Irish waters, though production remains limited to custom or small-scale efforts rather than mass builds. In the , catboat enthusiasts promote restorations and heritage sailing through organizations like the Dinghy Cruising Association, which supports events and cruises featuring models such as the Cornish Cormorant in areas like . The type maintains a niche presence today, valued for its simplicity and historical appeal in both Britain and , with ongoing interest in wooden replicas and modifications for gaff-rig durability in prevailing gales, distinct from continental European developments in larger variants.

References

  1. https://www.catboatcharters.com/why-a-catboat/
  2. https://soundingsonline.com/boats/the-evolution-of-catboats/
  3. https://www.bayheadyachtclub.org/sailing/catboat-history
  4. https://www.marshallcat.com/history
  5. https://www.gutenberg.org/cache/epub/29285/pg29285-images.html
  6. https://njmonthly.com/articles/historic-jersey/sailing-survivors-ancient-a-cats-boats/
  7. https://www.catboot-seezunge.de/english/more-about-catboats/catboat-designers/
  8. https://www.chesapeakecatboats.org/the-catboat.html
  9. https://catboats.org/wp-content/uploads/2024/10/2019-CBA-Yearbook.pdf
  10. https://soundingsonline.com/news/catboat-moments/
  11. https://forums.sailinganarchy.com/threads/sailing-instruction.168719/post-5122195
  12. https://sailboatdata.com/sailboat/beetle-cat/
  13. http://www.tedbrewer.com/sail_wood/chappiquidick.htm
  14. http://www.go-embedded.com/Sailingmanual.pdf
  15. https://americansailing.com/articles/whats-in-a-rig-cat-rig/
  16. https://www.marshallcat.com/sandpiper
  17. https://www.northsails.com/en-us/blogs/north-sails-blog/fibers-fabrics-a-sailors-guide-to-finding-the-right-materials
  18. https://capecodmaritimemuseum.org/sailing-exhibit-sailboats
  19. https://seagrant.gso.uri.edu/wp-content/uploads/2023/12/Shellfish_ecohistory.pdf
  20. https://www.marshallcat.com/
  21. https://areyspondboatyard.com/cruising-catboat-20/
  22. https://www.sailingworld.com/racing/small-catboat-won-adventure-race/
  23. https://www.bayheadyachtclub.org/about-bhyc/1974
  24. https://www.marshallcat.com/news-events
  25. https://www.catboatcharters.com/
  26. https://dbms.org/outreach/fall/
  27. https://chathamlivingmag.com/sailing-into-adventure/
  28. https://catboats.org/wp-content/uploads/2025/01/The-63rd-Annual-Meeting-Flyer-2025_kawo_25.01.05-1.pdf
  29. https://betterbayalliance.org/event/wickford-catboat-association-series-tue-nights-2023/2025-07-08/
  30. https://www.woodenboat.com/boats-for-sale?ssrnd=14&page=5
  31. https://skills.woodenboat.com/articles/planking-an-introduction-to-methods-techniques/
  32. https://www.discoverosterville.org/crosby-boats
  33. https://beetlecat.com/history/
  34. https://churbuck.com/2021/09/28/half-a-catboat/
  35. https://mysticseaport.org/explore/vessels/breck-marshall-working-catboat/
  36. https://woodenboat.org/ultimate-guide-2025/
  37. https://www.offcenterharbor.com/videos/wooden-boat-repair-refastening-part-3-new-screws-bungs/
  38. https://forum.woodenboat.com/forum/building-repair/224968-
  39. https://www.marshallcat.com/marshall-22
  40. https://www.practical-sailor.com/sailboat-reviews/used_sailboats/alerion-express-cat-19-and-marshall-sanderling-18
  41. https://www.ussailing.org/one-design-profile/marshall-sanderling-class-association/
  42. https://www.boats.com/sailing-boats/2022-custom-arey-s-xfc-22-9889445/
  43. https://sailboatdata.com/sailboat/nonsuch-30
  44. https://www.practical-sailor.com/sailboat-reviews/nonsuch-30
  45. https://sailboatdata.com/sailboat/sandpiper-15/
  46. https://sailmagazine.com/racing/the-first-catboat-to-enter-the-race-to-alaska/
  47. https://www.usharbors.com/2016/05/traditional-new-england-lives-on-in-cape-cod-catboats/
  48. https://www.gloucestertimes.com/opinion/columns/gloucester-abbott-hall-mural-reveals-citys-fishing-history/article_5b0e0e5a-5d5e-5e5a-9b5a-5e5a5e5a5e5a.html
  49. https://catboats.org/about-us/
  50. https://areyspondboatyard.com/catgathering/
  51. https://chathamyachtclub.wildapricot.org/page-18239
  52. http://www.beetlecat.org/history.php
  53. https://sailmagazine.com/cruising/cruising-beetle-cat-sailor-families/
  54. https://www.com-pacyachts.com/
  55. https://www.ostervillemuseum.org/thewoodenboatlegacy.html
  56. https://www.chesapeakecatboats.org/
  57. https://nmgl.org/i-lya-lyman-cat-boat-race/
  58. https://www.catboot-seezunge.de/english/more-about-catboats/catkreuzer-catcruisers-the-early-catboats-of-germany-of-the-period-1880-1930/
  59. https://www.catboot-seezunge.de/english/more-about-catboats/catboats-in-europe/
  60. https://www.lapaboukcompagnie.com/en
  61. https://afloat.ie/sail/historic-boats/item/38398-crazy-irish-cat-au-contraire-mon-vieux
  62. https://sailboatdata.com/sailboat/cormorant-12
  63. https://www.pbo.co.uk/boats/cornish-cormorant-used-boat-report-day-boat-75565
Add your contribution
Related Hubs
User Avatar
No comments yet.