Hubbry Logo
search
logo
Acetylene avatar
Acetylene
Acetylene
current hub
2327437

Acetylene

logo
Community Hub0 Subscribers
Read side by side
Acetylene
View on Wikipedia
from Wikipedia

Acetylene
Acetylene
Acetylene
Acetylene
Acetylene
Acetylene – space-filling model
Acetylene – space-filling model
space-filling model of solid acetylene
space-filling model of solid acetylene
Names
Preferred IUPAC name
Acetylene[1][2]
Systematic IUPAC name
Ethyne[3]
Identifiers
3D model (JSmol)
906677
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.000.743 Edit this at Wikidata
EC Number
  • 200-816-9
210
KEGG
RTECS number
  • AO9600000
UNII
UN number 1001 (dissolved)
3138 (in mixture with ethylene and propylene)
  • InChI=1S/C2H2/c1-2/h1-2H checkY
    Key: HSFWRNGVRCDJHI-UHFFFAOYSA-N checkY
  • InChI=1/C2H2/c1-2/h1-2H
    Key: HSFWRNGVRCDJHI-UHFFFAOYAY
  • C#C
Properties
C2H2
Molar mass 26.038 g·mol−1
Appearance Colorless gas
Odor Odorless
Density 1.1772 g/L = 1.1772 kg/m3 (0 °C, 101.3 kPa)[4]
Melting point −80.8 °C (−113.4 °F; 192.3 K) Triple point at 1.27 atm
−84 °C; −119 °F; 189 K (1 atm)
slightly soluble
Solubility slightly soluble in alcohol
soluble in acetone, benzene
Vapor pressure 44.2 atm (20 °C)[5]
Acidity (pKa) 25[6]
Conjugate acid Ethynium
−20.8×10−6 cm3/mol [7]
Thermal conductivity 21.4 mW·m−1·K−1 (300 K) [7]
Structure
Linear
Thermochemistry[7]
44.036 J·mol−1·K−1
200.927 J·mol−1·K−1
227.400 kJ·mol−1
209.879 kJ·mol−1
1300 kJ·mol−1
Hazards
GHS labelling:
GHS02: FlammableGHS04: Compressed GasGHS07: Exclamation mark
Danger
H220, H336
P202, P210, P233, P261, P271, P304, P312, P340, P377, P381, P403, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazards (white): no code
1
4
3
300 °C (572 °F; 573 K)
Explosive limits 2.5–100%
NIOSH (US health exposure limits):
PEL (Permissible)
 none[5]
REL (Recommended)
 C 2500 ppm (2662 mg/m3)[5]
IDLH (Immediate danger)
 N.D.[5]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Acetylene (systematic name: ethyne) is a chemical compound with the formula C2H2 and structure HC≡CH. It is a hydrocarbon and the simplest alkyne.[8] This colorless gas is widely used as a fuel and a chemical building block. It is unstable in its pure form and thus is usually handled as a solution.[9] Pure acetylene is odorless, but commercial grades usually have a marked odor due to impurities such as divinyl sulfide and phosphine.[9][10]

As an alkyne, acetylene is unsaturated because its two carbon atoms are bonded together in a triple bond. The carbon–carbon triple bond places all four atoms in the same straight line, with CCH bond angles of 180°.[11] The triple bond in acetylene results in a high energy content that is released when acetylene is burned.[12]

Discovery

[edit]

Acetylene was discovered in 1836 by Edmund Davy, who identified it as a "new carburet of hydrogen".[13][14] It was an accidental discovery while attempting to isolate potassium metal. By heating potassium carbonate with carbon at very high temperatures, he produced a residue of what is now known as potassium carbide, (K2C2), which reacted with water to release the new gas.[12] It was rediscovered in 1860 by French chemist Marcellin Berthelot, who coined the name acétylène.[15] Berthelot's empirical formula for acetylene (C4H2), as well as the alternative name "quadricarbure d'hydrogène" (hydrogen quadricarbide), were incorrect because many chemists at that time used the wrong atomic mass for carbon (6 instead of 12).[16] Berthelot was able to prepare this gas by passing vapours of organic compounds (methanol, ethanol, etc.) through a red hot tube and collecting the effluent. He also found that acetylene was formed by sparking electricity through mixed cyanogen and hydrogen gases. Berthelot later obtained acetylene directly by passing hydrogen between the poles of a carbon arc.[17][18]

Preparation

[edit]

Partial combustion of hydrocarbons

[edit]

Since the 1950s, acetylene has mainly been manufactured by the partial combustion of methane in the US, much of the EU, and many other countries:[9][19][20]

3 CH4 + 3 O2 → C2H2 + CO + 5 H2O

It is a recovered side product in production of ethylene by cracking of hydrocarbons. Approximately 400,000 tonnes were produced by this method in 1983.[9] Its presence in ethylene is usually undesirable because of its explosive character and its ability to poison Ziegler–Natta catalysts. It is selectively hydrogenated into ethylene, usually using Pd–Ag catalysts.[21]

Dehydrogenation of alkanes

[edit]

The heaviest alkanes in petroleum and natural gas are cracked into lighter molecules which are dehydrogenated at high temperature:

C2H6 → C2H2 + 2 H2
2 CH4 → C2H2 + 3 H2

This last reaction is implemented in the process of anaerobic decomposition of methane by microwave plasma.[22]

Carbochemical method

[edit]

The first acetylene produced was by Edmund Davy in 1836, via potassium carbide.[23] Acetylene was historically produced by hydrolysis (reaction with water) of calcium carbide:[12]

CaC2 + 2 H2O → Ca(OH)2 + C2H2

This reaction was discovered by Friedrich Wöhler in 1862,[24] but a suitable commercial scale production method which allowed acetylene to be put into wider scale use was not found until 1892 by the Canadian inventor Thomas Willson while searching for a viable commercial production method for aluminum.[25]

As late as the early 21st century, China, Japan, and Eastern Europe produced acetylene primarily by this method.[26]

The use of this technology has since declined worldwide with the notable exception of China, with its emphasis on coal-based chemical industry, as of 2013. Otherwise oil has increasingly supplanted coal as the chief source of reduced carbon.[27]

Calcium carbide production requires high temperatures, ~2000 °C, necessitating the use of an electric arc furnace. In the US, this process was an important part of the late-19th century revolution in chemistry enabled by the massive hydroelectric power project at Niagara Falls.[28]

Bonding

[edit]
Bond lengths and angles in acetylene

In terms of valence bond theory, in each carbon atom the 2s orbital hybridizes with one 2p orbital thus forming an sp hybrid. The other two 2p orbitals remain unhybridized. The two ends of the two sp hybrid orbital overlap to form a strong σ valence bond between the carbons, while on each of the other two ends hydrogen atoms attach also by σ bonds. The two unchanged 2p orbitals form a pair of weaker π bonds.[29]

Since acetylene is a linear symmetrical molecule, it possesses the D∞h point group.[30]

Physical properties

[edit]

Changes of state

[edit]

At atmospheric pressure, acetylene cannot exist as a liquid and does not have a melting point. The triple point on the phase diagram corresponds to the melting point (−80.8 °C) at the minimal pressure at which liquid acetylene can exist (1.27 atm). At temperatures below the triple point, solid acetylene can change directly to the vapour (gas) by sublimation. The sublimation point at atmospheric pressure is −84.0 °C.[31]

Other

[edit]

At room temperature and atmospheric pressure, the solubility of acetylene in acetone is 27.9 g per kg. For the same amount of dimethylformamide (DMF), the solubility is 51 g. At 20.26 bar, the solubility increases to 689.0 and 628.0 g for acetone and DMF, respectively. These solvents are used in pressurized gas cylinders.[32]

Applications

[edit]

Welding

[edit]

Approximately 20% of acetylene is supplied by the industrial gases industry for oxyacetylene gas welding and cutting due to the high temperature of the flame. Combustion of acetylene with oxygen produces a flame of over 3,600 K (3,330 °C; 6,020 °F), releasing 11.8 kJ/g. Oxygen with acetylene is the hottest burning common gas mixture.[33] Acetylene is the third-hottest natural chemical flame after dicyanoacetylene's 5,260 K (4,990 °C; 9,010 °F) and cyanogen at 4,798 K (4,525 °C; 8,177 °F). Oxy-acetylene welding was a popular welding process in previous decades. The development and advantages of arc-based welding processes have made oxy-fuel welding nearly extinct for many applications. Acetylene usage for welding has dropped significantly. On the other hand, oxy-acetylene welding equipment is quite versatile – not only because the torch is preferred for some sorts of iron or steel welding (as in certain artistic applications), but also because it lends itself easily to brazing, braze-welding, metal heating (for annealing or tempering, bending or forming), the loosening of corroded nuts and bolts, and other applications. Bell Canada cable-repair technicians still use portable acetylene-fuelled torch kits as a soldering tool for sealing lead sleeve splices in manholes and in some aerial locations. Oxyacetylene welding may also be used in areas where electricity is not readily accessible. Oxyacetylene cutting is used in many metal fabrication shops. For use in welding and cutting, the working pressures must be controlled by a regulator, since above 15 psi (100 kPa), if subjected to a shockwave (caused, for example, by a flashback), acetylene decomposes explosively into hydrogen and carbon.[34]

Acetylene fuel container/burner as used on the island of Bali

Chemicals

[edit]

Acetylene is useful for many processes, but few are conducted on a commercial scale.[35]

One of the major chemical applications is ethynylation of formaldehyde.[9] Acetylene adds to aldehydes and ketones to form α-ethynyl alcohols:

The reaction gives butynediol, with propargyl alcohol as the by-product. Copper acetylide is used as the catalyst.[36][37]

In addition to ethynylation, acetylene reacts with carbon monoxide to give acrylic acid, or acrylic esters. Metal catalysts are required. These derivatives form products such as acrylic fibers, glasses, paints, resins, and polymers. Except in China, use of acetylene as a chemical feedstock has declined by 70% from 1965 to 2007 owing to cost and environmental considerations.[38] In China, acetylene is a major precursor to vinyl chloride.[35]

Historical uses

[edit]

Prior to the widespread use of petrochemicals, coal-derived acetylene was a building block for several industrial chemicals. Thus acetylene can be hydrated to give acetaldehyde, which in turn can be oxidized to acetic acid. Processes leading to acrylates were also commercialized. Almost all of these processes became obsolete with the availability of petroleum-derived ethylene and propylene.[39]

Niche applications

[edit]

In 1881, the Russian chemist Mikhail Kucherov[40] described the hydration of acetylene to acetaldehyde using catalysts such as mercury(II) bromide. Before the advent of the Wacker process, this reaction was conducted on an industrial scale.[41]

The polymerization of acetylene with Ziegler–Natta catalysts produces polyacetylene films. Polyacetylene, a chain of CH centres with alternating single and double bonds, was one of the first discovered organic semiconductors. Its reaction with iodine produces a highly electrically conducting material. Although such materials are not useful, these discoveries led to the developments of organic semiconductors, as recognized by the Nobel Prize in Chemistry in 2000 to Alan J. Heeger, Alan G MacDiarmid, and Hideki Shirakawa.[9]

In the 1920s, pure acetylene was experimentally used as an inhalation anesthetic.[42]

Acetylene is sometimes used for carburization (that is, hardening) of steel when the object is too large to fit into a furnace.[43]

Acetylene is used to volatilize carbon in radiocarbon dating. The carbonaceous material in an archeological sample is treated with lithium metal in a small specialized research furnace to form lithium carbide (also known as lithium acetylide). The carbide can then be reacted with water, as usual, to form acetylene gas to feed into a mass spectrometer to measure the isotopic ratio of carbon-14 to carbon-12.[44]

Acetylene combustion produces a strong, bright light and the ubiquity of carbide lamps drove much acetylene commercialization in the early 20th century. Common applications included coastal lighthouses,[45] street lights, [12] and automobile[46] and mining headlamps.[47] In most of these applications, direct combustion is a fire hazard, and so acetylene has been replaced, first by incandescent lighting and many years later by low-power/high-lumen LEDs. Nevertheless, acetylene lamps remain in limited use in remote or otherwise inaccessible areas and in countries with a weak or unreliable central electric grid.[47]

Natural occurrence

[edit]

The energy richness of the C≡C triple bond and the rather high solubility of acetylene in water make it a suitable substrate for bacteria, provided an adequate source is available.[48] A number of bacteria living on acetylene have been identified. The enzyme acetylene hydratase catalyzes the hydration of acetylene to give acetaldehyde:[49]

C2H2 + H2O → CH3CHO

Acetylene is a moderately common chemical in the universe, often associated with the atmospheres of gas giants.[50] One curious discovery of acetylene is on Enceladus, a moon of Saturn. Natural acetylene is believed to form from catalytic decomposition of long-chain hydrocarbons at temperatures of 1,700 K (1,430 °C; 2,600 °F) and above. Since such temperatures are highly unlikely on such a small distant body, this discovery is potentially suggestive of catalytic reactions within that moon, making it a promising site to search for prebiotic chemistry.[51][52]

Reactions

[edit]

Vinylation reactions

[edit]

In vinylation reactions, H−X compounds add across the triple bond. Alcohols and phenols add to acetylene to give vinyl ethers. Thiols give vinyl thioethers. Similarly, vinylpyrrolidone and vinylcarbazole are produced industrially by vinylation of 2-pyrrolidone and carbazole.[32][9]

The hydration of acetylene is a vinylation reaction, but the resulting vinyl alcohol isomerizes to acetaldehyde. The reaction is catalyzed by mercury salts. This reaction once was the dominant technology for acetaldehyde production, but it has been displaced by the Wacker process, which affords acetaldehyde by oxidation of ethylene, a cheaper feedstock. A similar situation applies to the conversion of acetylene to the valuable vinyl chloride by hydrochlorination versus the oxychlorination of ethylene.

Vinyl acetate is used instead of acetylene for some vinylations, which are more accurately described as transvinylations.[53] Higher esters of vinyl acetate have been used in the synthesis of vinyl formate.

Organometallic chemistry

[edit]

Acetylene and its derivatives (2-butyne, diphenylacetylene, etc.) form complexes with transition metals. Its bonding to the metal is somewhat similar to that of ethylene complexes. These complexes are intermediates in many catalytic reactions such as alkyne trimerisation to benzene, tetramerization to cyclooctatetraene,[9] and carbonylation to hydroquinone:[54]

Fe(CO)5 + 4 C2H2 + 2 H2O → 2 C6H4(OH)2 + FeCO3 at basic conditions (50–80 °C, 20–25 atm).

Metal acetylides, species of the formula LnM−C2R, are also common. Copper(I) acetylide and silver acetylide can be formed in aqueous solutions with ease due to a favorable solubility equilibrium.[55]

Acid–base reactions

[edit]
Main article: Acetylide § Preparation

Acetylene has a pKa of 25. Acetylene can be deprotonated by a superbase to form an acetylide:[55]

HC≡CH + RM → RH + HC≡CM

Various organometallic[56] and inorganic[57] reagents are effective.

The new acetylene plant of BASF, commissioned in 2020

Hydrogenation

[edit]

Acetylene can be semihydrogenated to ethylene, providing a feedstock for a variety of polyethylene plastics. Halogens add to the triple bond.

Safety and handling

[edit]

Acetylene is not especially toxic, but when generated from calcium carbide, or CaC2, it can contain toxic impurities such as traces of phosphine and arsine, which gives it a distinct garlic-like smell. It is also highly flammable, as are most light hydrocarbons, hence its use in welding. Its most singular hazard is associated with its intrinsic instability, especially when it is pressurized: under certain conditions acetylene can react in an exothermic addition-type reaction to form a number of products, typically benzene and/or vinylacetylene, possibly in addition to carbon and hydrogen.[citation needed] Although it is stable at normal pressures and temperatures, if it is subjected to pressures as low as 15 psig it can explode.[12] The safe limit for acetylene therefore is 101 kPagage, or 15 psig.[58][59] Additionally, if acetylene is initiated by intense heat or a shockwave, it can decompose explosively if the absolute pressure of the gas exceeds about 200 kilopascals (29 psi). It is therefore supplied and stored dissolved in acetone or dimethylformamide (DMF),[59][60][61] contained in a gas cylinder with a porous filling, which renders it safe to transport and use, given proper handling. Acetylene cylinders should be used in the upright position to avoid withdrawing acetone during use.[62]

Information on safe storage of acetylene in upright cylinders is provided by the OSHA,[63][64] Compressed Gas Association,[59] United States Mine Safety and Health Administration (MSHA),[65] EIGA,[62] and other agencies.

Copper catalyses the decomposition of acetylene, and as a result acetylene should not be transported in copper pipes.[66]

Cylinders should be stored in an area segregated from oxidizers to avoid exacerbated reaction in case of fire/leakage.[59][64] Acetylene cylinders should not be stored in confined spaces, enclosed vehicles, garages, and buildings, to avoid unintended leakage leading to explosive atmosphere.[59][64] In the US, National Electric Code (NEC) requires consideration for hazardous areas including those where acetylene may be released during accidents or leaks.[67] Consideration may include electrical classification and use of listed Group A electrical components in US.[67] Further information on determining the areas requiring special consideration is in NFPA 497.[68] In Europe, ATEX also requires consideration for hazardous areas where flammable gases may be released during accidents or leaks.[62]

References

[edit]
[edit]
Revisions and contributorsEdit on WikipediaRead on Wikipedia

Acetylene

View on Grokipedia
from Grokipedia
Acetylene, systematically known as ethyne, is the simplest alkyne hydrocarbon with the chemical formula C₂H₂, featuring a carbon-carbon triple bond between two carbon atoms, each attached to a hydrogen atom.[1] It is a colorless gas that is slightly lighter than air, odorless in pure form but often exhibiting a faint garlic-like odor due to impurities such as phosphine.[1] Acetylene has a molecular weight of 26.04 g/mol, a melting point of -80.7 °C, a boiling point of -84.0 °C, and a density of 1.10 g/L at 0 °C and 1 atm, with slight solubility in water (approximately 1,200 mg/L at 25 °C).[1] Industrially, acetylene is produced mainly by the hydrolysis of calcium carbide (CaC₂) with water, particularly in Asia, generating the gas along with calcium hydroxide, or as a by-product of hydrocarbon steam cracking in ethylene production elsewhere, where natural gas or naphtha is pyrolyzed at high temperatures (around 800–1,500 °C).[2] Alternative methods include partial oxidation of methane or electric arc processes, though the calcium carbide route remains significant for on-site generation due to its simplicity. These production methods yield acetylene suitable for immediate use or purification, with global output around 12 million tons as of 2025, largely tied to chemical manufacturing demands.[2] Acetylene's key applications stem from its high flame temperature (up to 3,300 °C when combusted with oxygen) and reactivity, making it essential for oxyacetylene welding and cutting of metals in industries such as construction and automotive repair.[3] The majority of produced acetylene serves as a chemical intermediate for synthesizing compounds like vinyl chloride (for PVC), acetylene derivatives in pharmaceuticals, and other organics such as acrylonitrile and vinyl acetate.[4] Despite its utility, acetylene is highly flammable (lower explosive limit 2.5%, upper 100% in air) and poses explosion risks when compressed or mixed with oxidizers, necessitating strict handling protocols as a simple asphyxiant and reactive gas.[1]

History

Discovery

The discovery of acetylene occurred during the early 19th century, a period when organic chemistry was rapidly advancing from foundational theories of atomic structure and combustion to systematic studies of carbon-based compounds. Chemists were increasingly exploring gases derived from organic materials, such as those obtained from the decomposition or transformation of alcohols, building on earlier work with ethylene and marsh gas. This context set the stage for the identification of new hydrocarbons, including the flammable gas later known as acetylene.[5] In 1836, British chemist Edmund Davy, a cousin of Sir Humphry Davy and professor at the Royal Dublin Society, accidentally isolated acetylene while attempting to produce potassium metal on a larger scale using a modification of Brünner's method. He heated a mixture of calcined cream of tartar (potassium bitartrate) and dry charcoal powder in a closed iron retort, yielding metallic potassium along with a black, porous residue resembling a carbide. When this residue—later identified as an early form of potassium carbide—was treated with pure water in a tube over mercury or water, it vigorously decomposed, releasing a colorless, odorless gas that was highly inflammable and burned with a bright, white flame more intense than that of known gases like olefiant gas (ethylene). Davy collected the gas, noting its density relative to air and its explosive reaction with oxygen or air mixtures, and described it as a "new gaseous bicarburet of hydrogen" in a notice to the British Association for the Advancement of Science; he proposed its composition as 2C + H based on combustion analysis.[6] The gas remained a laboratory curiosity until 1860, when French chemist Marcellin Berthelot independently rediscovered and characterized it more thoroughly amid his pioneering work in organic synthesis. Berthelot produced acetylene through partial combustion of methane in limited oxygen, yielding the gas alongside other hydrocarbons, and via the dehydration of ethanol using phosphoric anhydride (P2O5), which removed water to form the triple-bonded molecule; he also generated it by passing ethanol vapors through a red-hot porcelain tube. Additionally, Berthelot achieved a direct synthesis by subjecting a mixture of carbon and hydrogen to an electric arc between carbon electrodes, proposing an empirical formula of C4H2, which was later corrected to the molecular formula C2H2. He coined the name "acétylène" (acetylene) to reflect its derivation from acetyl compounds and its structural similarity to ethylene, solidifying its place in the emerging understanding of unsaturated hydrocarbons.[7]

Early production and uses

The commercial production of acetylene began with the development of calcium carbide synthesis, pioneered by Canadian inventor Thomas L. Willson and American chemist James Turner Morehead. On May 2, 1892, Willson accidentally produced calcium carbide in an electric arc furnace while attempting to extract aluminum, using a mixture of lime (calcium oxide) and coke as raw materials in Spray, North Carolina.[8] Morehead, building on this breakthrough, established the first commercial plant in the same location, which became operational in August 1894 and produced one ton of calcium carbide daily; this carbide was then hydrolyzed with water to generate acetylene gas.[8] To scale production, Willson and Morehead sold their patents to the Electrogas Company in August 1894, focusing initially on lighting applications.[8] This led to the formation of the Union Carbide Company in 1898, which consolidated various interests to manufacture calcium carbide and acetylene on a larger scale, marking the transition from experimental to industrial output.[8] The first commercial sale of calcium carbide occurred on January 29, 1894, to the chemical supplier Eimer and Amend, enabling broader distribution.[8] Acetylene's early applications centered on portable lighting, particularly in carbide lamps that revolutionized illumination in hazardous environments. Invented in the late 1890s, these lamps mixed calcium carbide with water to produce acetylene gas on demand, providing a bright, steady flame for mining operations and early automobiles.[9] In mining, Frederic Baldwin's 1900 U.S. Patent No. 656,874 for an acetylene gas lamp facilitated hands-free cap lamps, essential for coal workers navigating dark tunnels.[9] For automobiles, acetylene headlamps became standard by the early 1900s, offering reliable nighttime visibility before electric alternatives dominated.[10] Initial adoption faced significant challenges, including sooty flames from incomplete combustion that required frequent cleaning of reflectors and globes, and explosion risks from acetylene igniting methane in mines.[11] These issues prompted early safety innovations, such as enclosed designs to contain flames and water-feed valves to control gas generation, reducing leak hazards and improving reliability in the 1900s.[11]

Properties

Structure and bonding

Acetylene has the molecular formula C2_2H2_2 and adopts a linear geometry, with the two carbon atoms connected by a triple bond in the H–C≡C–H arrangement.[12][1] The carbon atoms in acetylene are sp hybridized, each forming two sp hybrid orbitals oriented at 180° bond angles, which accounts for the molecule's linearity. The carbon-carbon triple bond consists of one σ bond from end-to-end overlap of sp orbitals and two π bonds from sideways overlap of unhybridized p orbitals. Each carbon also forms a σ bond with a hydrogen atom via overlap of an sp hybrid orbital and a 1s orbital.[12] The C≡C bond length is 120 pm, while the C–H bond length is 106 pm. The bond dissociation energy for the C≡C bond is approximately 962 kJ/mol, and for the C–H bond, it is approximately 558 kJ/mol.[13] As the first member of the alkyne family, acetylene's bonding contrasts with ethylene (sp2^2 hybridized carbons with a C=C double bond) and ethane (sp3^3 hybridized carbons with a C–C single bond), highlighting the progression in hybridization and bond multiplicity across hydrocarbons. Due to its symmetric linear structure, acetylene has a dipole moment near zero.[12]

Physical properties

Acetylene (C₂H₂) is a colorless gas under standard temperature and pressure conditions. Commercial samples often exhibit a garlic-like odor attributable to trace impurities such as phosphine generated during production from calcium carbide.[14] The compound undergoes phase transitions at low temperatures, with a triple point serving as the melting point and a sublimation point approximating the boiling point at atmospheric pressure. Its critical point marks the temperature and pressure beyond which distinct liquid and gas phases do not coexist. Thermodynamic properties reflect its endothermic formation and relatively low heat capacity compared to similar hydrocarbons.
PropertyValueConditions/Notes
Melting point-80.7 °CTriple point
Boiling point-84.0 °CSublimation at 1 atm
Critical temperature35.3 °C
Critical pressure62.1 bar
Density (gas)1.097 g/LSTP (0 °C, 1 atm)
Solubility in water0.103 g/100 mL0 °C
Solubility in acetoneUp to 27.5 g/100 mLUnder pressure (e.g., cylinder storage conditions)
Thermal conductivity0.0188 W/m·KAt 25 °C
Autoignition temperature305 °C
Standard enthalpy of formation (ΔH_f°)+227.4 kJ/molGas phase, 298 K
Molar heat capacity (C_p)35.3 J/mol·KGas phase, approximate at low temperature
These properties underscore acetylene's utility as a compressed gas, where its high solubility in acetone enables safe storage in cylinders without liquefaction.[1][15][16][17]

Occurrence

Natural occurrence on Earth

Acetylene is present in trace amounts in various terrestrial geological formations, primarily as a minor component of hydrocarbon mixtures. In petroleum deposits, compounds from the acetylene series (alkynes) have been identified, notably in crude oils from the Baku region of Azerbaijan (formerly Russia), where they contribute to the overall hydrocarbon profile alongside paraffins, olefins, and aromatics.[18] Similarly, low concentrations of acetylene occur in some natural gas reservoirs, often as a result of geological maturation processes, though typically at levels below detection thresholds in many conventional fields. These occurrences reflect acetylene's role as an intermediate in the diagenetic transformation of organic matter under anaerobic conditions. The formation of acetylene in natural settings is linked to both abiotic and biogenic processes. Volcanic activity serves as a significant source, with acetylene detected in fumarolic gases and preserved within volcanic glasses, likely produced through high-temperature pyrolysis of methane or other hydrocarbons in magmatic systems.[19] In sedimentary environments, anaerobic microbial processes can generate acetylene via metabolic pathways, such as those involving nitrogenase enzymes or reductive dechlorination in subsurface aquifers, though terrestrial sources remain poorly quantified and are generally sparse.[20] Additionally, acetylene has been observed in coal seams, where it adsorbs onto coal matrices and may desorb during natural degassing or excavation, contributing to mine gases in low-rank coals with high porosity and oxygen content.[21] Acetylene is also produced during incomplete combustion in natural fires, particularly wildfires, where it acts as a biomarker for biomass burning; preindustrial atmospheric levels preserved in polar ice cores averaged around 36 parts per trillion (ppt) during periods of high fire activity (1000–1500 CE), serving as a proxy for paleofire emissions.[22] In Earth's atmosphere, acetylene concentrations average around 145 ppt in the continental boundary layer and 90 ppt in the free troposphere, with global background levels of approximately 100 ppt, reflecting a mix of terrestrial emissions diluted by atmospheric mixing.[23] However, concentrations are elevated in specialized environments like deep-sea hydrothermal vents, where abiogenic hydrocarbons including acetylene have been detected in fluids from sites such as Rainbow and Lost City, at levels supporting prebiotic chemistry under high-temperature, high-pressure conditions.[24]

Extraterrestrial occurrence

Acetylene is present in the atmospheres of the outer planets, where it forms primarily through photochemical reactions initiated by ultraviolet photolysis of methane. In Jupiter's stratosphere, the volume mixing ratio of acetylene reaches approximately 10^{-7}, while in Neptune it is around 6 \times 10^{-8}. On Uranus, the abundance is higher, with a volume mixing ratio estimated at about 2 \times 10^{-7}, reflecting differences in solar flux and atmospheric dynamics that influence hydrocarbon production rates.[25][26][27][28] In the atmosphere of Saturn's moon Titan, acetylene is a significant trace constituent, with stratospheric volume mixing ratios averaging around 3 \times 10^{-6} but reaching up to 10^{-5} at higher altitudes and polar regions. It was first detected by the Voyager 1 spacecraft in 1980 through infrared spectroscopy and later confirmed and mapped in detail by the Cassini mission's Composite Infrared Spectrometer (CIRS) from 2004 to 2017, revealing latitudinal variations linked to seasonal photochemistry. Acetylene plays a key role in Titan's atmospheric chemistry by polymerizing and reacting with other hydrocarbons and nitriles to form complex organic aerosols that contribute to the moon's characteristic orange haze layers.[29][30][31] Interstellar acetylene has been detected in dense molecular clouds through infrared absorption spectroscopy, with observations of vibrational transitions in the 13.7 \mu m band toward embedded infrared sources. In clouds like those associated with the Taurus region, its abundance relative to CO ranges from 3 \times 10^{-4} to 3 \times 10^{-3}, indicating it forms via ion-molecule reactions and contributes to carbon chain growth in cold interstellar environments. Rotational transitions of acetylene, though challenging due to its lack of a permanent dipole moment, have been observed in warmer regions via vibrationally excited states using submillimeter spectroscopy.[32] As a simple hydrocarbon, acetylene holds potential significance in astrobiology as a prebiotic building block, capable of participating in reactions that synthesize more complex organic molecules such as pyrimidines under irradiation or catalytic conditions. It has been detected in comets, such as C/1996 B2 (Hyakutake), with abundances of 0.3–0.9% relative to water, suggesting delivery of acetylene to early planetary surfaces via impacts from icy bodies. In interstellar ices and cometary analogs, acetylene can photolyze or react to form prebiotic precursors, potentially seeding organic chemistry on nascent worlds.[33][34]

Production

Calcium carbide method

The calcium carbide method is a traditional carbochemical process for producing acetylene gas through the hydrolysis of calcium carbide (CaC₂) with water. The primary reaction is highly exothermic and proceeds according to the equation:
CaCX2+2 HX2O→CX2HX2+Ca(OH)X2 \ce{CaC2 + 2 H2O -> C2H2 + Ca(OH)2}
This reaction generates approximately 0.35 cubic meters of acetylene gas per kilogram of pure calcium carbide at standard conditions, with practical yields reaching up to 90% under controlled industrial settings to minimize losses from side reactions or incomplete conversion.[35][36] Calcium carbide itself is synthesized by heating quicklime (calcium oxide, CaO) with coke or anthracite (carbon source) in electric arc furnaces at temperatures between 2000 and 2200 °C. The preparation reaction is:
CaO+3 C→CaCX2+CO \ce{CaO + 3 C -> CaC2 + CO}
This step produces calcium carbide with typical purity levels of 80-85%, and the process is notably energy-intensive, consuming about 3.2-4 kWh per kilogram of calcium carbide due to the high-temperature requirements and electrical resistance heating.[37][38] In the overall production flow, granulated or powdered calcium carbide is fed into acetylene generators, where water is dripped or sprayed in a controlled manner to manage the reaction rate and heat evolution, preventing pressure buildup or explosions. The crude acetylene gas emerging from the generators contains impurities such as hydrogen sulfide (H₂S), phosphine (PH₃), and moisture, which are removed through sequential purification steps: scrubbing with sulfuric acid or oxidizing agents to eliminate H₂S and PH₃, followed by drying and filtration to achieve commercial-grade purity (typically >99%). The byproduct, calcium hydroxide slurry (carbide lime), is often used in wastewater treatment or agriculture.[39][40][36] Globally, the calcium carbide method accounts for roughly 65% of acetylene production capacity, with global output estimated at approximately 10-11 million metric tons annually as of 2024, with the vast majority concentrated in China owing to its coal-based electricity and integrated chemical infrastructure. This approach, scaled industrially in the early 20th century, remains dominant despite its high energy demands compared to alternative routes.[41][42][8]

Partial combustion of hydrocarbons

The partial combustion of hydrocarbons represents a primary modern industrial route for acetylene production, utilizing methane-rich natural gas as the feedstock in a controlled oxidation environment. This process involves the incomplete combustion of methane with limited oxygen to generate the intense heat necessary for thermal cracking, producing acetylene alongside hydrogen and other by-products. The overall simplified reaction is given by:
2CH4+12O2→C2H2+2H2+H2O 2 \mathrm{CH_4} + \frac{1}{2} \mathrm{O_2} \rightarrow \mathrm{C_2H_2} + 2 \mathrm{H_2} + \mathrm{H_2O}
The reaction proceeds in dedicated partial oxidation reactors at temperatures of 1200–1500 °C, where substoichiometric oxygen ensures only partial burning, with the exotherm providing the energy for pyrolysis.[43] A prominent implementation is the BASF (Sachsse–Bartholomé) process, which employs preheated natural gas and oxygen (both at ~600 °C) mixed at high velocity in a cylindrical burner for ignition and rapid reaction. The residence time is limited to milliseconds to favor acetylene formation, after which the effluent gases are abruptly quenched—typically with water sprays to 80–90 °C or oil to 200–250 °C—to inhibit decomposition or further oxidation. This quenching step is crucial for achieving acetylene selectivity, as prolonged exposure at high temperatures leads to carbon deposition and loss of yield. In the BASF process and similar variants, acetylene yields range from 10–15% based on methane input, with the cracked gas composition typically including 7.5–8.8 vol% acetylene, 42–57 vol% hydrogen, 26–38 vol% carbon monoxide, and minor amounts of ethylene as a co-product; soot formation (50–350 kg per metric ton of acetylene) is managed through downstream scrubbing. Thermal efficiency reaches 73–75% with oil quenching, higher than water-based alternatives due to better heat recovery for steam generation.[43] Process variants, such as those incorporating electric arc or plasma assistance, supplement the combustion heat to attain peak temperatures up to 1600 °C, enhancing yields for specific feedstocks while maintaining the core quenching mechanism to prevent complete combustion. The method's advantages lie in leveraging abundant natural gas supplies for scalable production, with integrated co-production of synthesis gas (hydrogen and carbon monoxide) enabling downstream applications; it constitutes approximately 35% of global acetylene output (encompassing hydrocarbon routes), predominant in natural gas-rich regions outside major coal-dependent areas like China.

Dehydrogenation of alkanes

Acetylene can be produced via the dehydrogenation of alkanes, primarily methane or higher hydrocarbons like ethane and propane, through non-oxidative thermal or catalytic cracking processes. The key reaction for methane is the endothermic dehydrogenation represented by the equation:
2CH4→C2H2+3H2 2 \mathrm{CH_4} \rightarrow \mathrm{C_2H_2} + 3 \mathrm{H_2}
This transformation requires high temperatures of 1000–1300 °C to overcome thermodynamic barriers and achieve significant conversion rates. Catalysts such as molybdenum or tungsten supported on alumina are employed to lower activation energies, facilitate hydrogen abstraction, and improve selectivity toward acetylene over unwanted byproducts like ethylene or higher hydrocarbons. These supported metal catalysts enhance the rate of C–H bond cleavage while operating in a gas-phase fixed-bed reactor, typically under reduced pressure to favor the forward reaction.[44][45] Electric arc and plasma-based methods provide an alternative non-catalytic route for high-temperature cracking without oxygen, exemplified by the historical DuPont process developed in the 1960s. In this approach, hydrocarbons are fed into a rotating direct-current electric arc plasma, where temperatures exceed 1700 °C in the arc zone, followed by rapid quenching to preserve acetylene yields of 20–30% based on carbon conversion. The process generates acetylene alongside hydrogen and carbon black, with no oxygen involvement to prevent full combustion.[46][47] Significant challenges in these dehydrogenation processes include coke formation on catalyst surfaces or reactor walls, which deactivates active sites and reduces efficiency, necessitating periodic regeneration through oxidation or mechanical cleaning. Additionally, the co-production of carbon black requires downstream separation steps, though it serves as a marketable byproduct in some setups. These issues contribute to operational complexity and higher maintenance costs compared to oxidative routes.[48][49] Dehydrogenation methods currently account for less than 10% of global acetylene production, valued for their lower energy intensity relative to the calcium carbide route—due to direct use of gaseous feedstocks—but higher than partial combustion processes owing to the need for extreme heating. As an oxygen-free alternative to partial combustion, dehydrogenation avoids COx emissions entirely, aligning with efforts to develop cleaner hydrocarbon upgrading technologies.[50][51]

Reactions

Vinylation reactions

Acetylene undergoes vinylation reactions through addition across its triple bond, yielding vinyl compounds that serve as essential precursors for polymers and other materials. One prominent example is the hydrochlorination of acetylene to produce vinyl chloride (CH₂=CHCl), which occurs via the reaction C₂H₂ + HCl → CH₂=CHCl. This process is catalyzed by mercuric chloride (HgCl₂, typically 10 wt% on activated carbon) at temperatures of 140–200°C and slightly above atmospheric pressure, with a gas hourly space velocity of approximately 100 h⁻¹.[52] The reaction can proceed stepwise, with a second equivalent of HCl adding to vinyl chloride to form 1,1-dichloroethane (gem-dichloride), though conditions are optimized to favor the monoadduct.[52] The mechanism involves electrophilic addition to the acetylene triple bond, following Markovnikov regioselectivity where the hydrogen adds to the carbon with more hydrogens, resulting in the vinyl chloride structure. Above 135°C, it proceeds via an Eley–Rideal pathway, in which HCl adsorbs on the catalyst surface while gaseous acetylene reacts directly with the adsorbed species.[52] This regioselectivity ensures the formation of the thermodynamically favored trans-vinyl intermediate in the addition process.[52] On an industrial scale, the acetylene hydrochlorination route remains a basis for polyvinyl chloride (PVC) production, accounting for approximately 20 million tons per year globally, particularly in coal-rich regions like China where it constitutes a significant share of VCM output.[53][54] Another key vinylation process is the Reppe vinylation, involving the addition of alcohols (ROH) to acetylene to form vinyl ethers (CH₂=CH-OR). Developed by Walter Reppe, this reaction typically employs alkaline catalysts such as potassium hydroxide (KOH) or cesium hydroxide (CsOH) in dimethyl sulfoxide (DMSO) or other aprotic solvents, at 70–160°C and acetylene pressures of 1–50 bar.[52] The mechanism is nucleophilic addition, where the base deprotonates the alcohol to generate an alkoxide ion, which attacks the electrophilic triple bond of acetylene, followed by protonation to yield the vinyl ether.[52] For instance, methanol reacts to form methyl vinyl ether under these conditions. This process involves a trans configuration in the vinyl anion intermediate due to its stability.[52] Another important historical vinylation reaction is the hydrocyanation of acetylene with hydrogen cyanide (HCN) to produce acrylonitrile (CH₂=CHCN), via C₂H₂ + HCN → CH₂=CHCN. This process, also developed by Reppe, used cuprous chloride (CuCl) as a catalyst in the gas phase at around 100–150°C. Although largely replaced by the propylene-based ammoxidation process since the 1960s, it was a major industrial route for acrylonitrile production in the mid-20th century and remains relevant for understanding acetylene's role in polymer precursor synthesis.[52] Vinyl esters, such as vinyl acetate, are also synthesized via vinylation of carboxylic acids with acetylene, though distinct from the alcohol-based Reppe process. These reactions occur in the gas phase at 160–220°C using zinc acetate supported on carbon as catalyst, proceeding through electrophilic addition analogous to the HCl case.[52] Such vinyl compounds from acetylene vinylation are foundational in chemical synthesis for polymers like PVC.[52]

Organometallic chemistry

Acetylene participates in organometallic chemistry primarily through the formation of acetylide complexes and π-coordinated complexes, leveraging its dual role as a σ-donor/acceptor ligand and its mild acidity. The terminal C-H bonds of acetylene (pK_a ≈ 25) enable deprotonation to generate the acetylide anion [C≡C]^-, which coordinates to metals as a σ-bound ligand. For instance, reaction of acetylene with sodium metal yields disodium acetylide (Na₂C₂), a white solid used as a synthetic intermediate, via the equation C₂H₂ + 2Na → Na₂C₂ + H₂. This process occurs in liquid ammonia or inert solvents and highlights acetylene's utility in preparing main-group organometallics. Similarly, acetylene reacts with copper(I) or silver(I) salts, such as CuCl or AgNO₃ in ammoniacal solution, to form insoluble acetylides like Cu₂C₂ and Ag₂C₂, which are highly sensitive explosives due to their end-on (σ) coordination and weak C-C bonding. These copper and silver acetylides have been employed in organic synthesis for carbon chain extension but require careful handling owing to their instability. In addition to σ-acetylides, acetylene forms π-complexes where the triple bond coordinates side-on (η²) to transition metals, often weakening the C≡C bond through metal-ligand interactions. A representative example is tetracarbonyl(η²-acetylene)iron(0), [Fe(CO)₄(η²-C₂H₂)], synthesized by photolysis of Fe(CO)₅ in the presence of acetylene; X-ray crystallography reveals a lengthened C-C bond (1.25 Å vs. 1.20 Å in free acetylene) due to π-backbonding from the d-orbitals of Fe(0) into the LUMO of the alkyne, alongside σ-donation from the filled π-orbital to the metal. This side-on coordination contrasts with the linear end-on mode in acetylides and influences reactivity, such as facilitating insertion or coupling reactions. Other metals, including Ru and Os, form analogous [M(CO)₄(η²-C₂H₂)] complexes, where backbonding stabilizes the otherwise labile alkyne ligand and enables ligand substitution at the metal center. These organometallic complexes of acetylene play key roles in catalysis, particularly in polymerization and cross-coupling reactions. In Ziegler-Natta catalysis, titanium-based complexes coordinate acetylene to initiate stereoregular polymerization to polyacetylene, a conjugated polymer with electrical conductivity; mechanistic studies show the alkyne inserts into Ti-C bonds, propagating the chain via metallacyclic intermediates. Acetylene π-complexes also feature in the Sonogashira coupling, where Pd(0)/Cu(I) catalysts couple acetylene with aryl or vinyl halides (ArX) to form ArC≡CH, proceeding through transmetalation of a copper acetylide intermediate to Pd, followed by reductive elimination; this reaction, developed in 1975, is widely used for synthesizing enediynes and pharmaceuticals, with the Cu co-catalyst enhancing alkyne deprotonation and preventing homocoupling.

Acid-base reactions

Acetylene displays weakly acidic properties attributable to its terminal C-H bonds, which have a pKa of approximately 25. This acidity arises from the sp-hybridization of the carbon atoms, which imparts greater s-character to the hybrid orbitals (50% s compared to 33% in sp² and 25% in sp³), resulting in a higher electronegativity of the carbon and thus easier deprotonation of the attached hydrogen compared to alkenes (pKa ≈ 44) or alkanes (pKa ≈ 50).[55] Deprotonation of acetylene requires strong bases and typically produces the acetylide anion, HC≡C⁻. A common method involves reaction with the amide ion in liquid ammonia:
C2H2+NH2−→HC≡C−+NH3 \mathrm{C_2H_2 + NH_2^- \rightarrow HC \equiv C^- + NH_3}
This process is facilitated by sodium amide (NaNH₂) dissolved in liquid ammonia, yielding sodium acetylide as the salt. Alternatively, sodium metal in liquid ammonia can be used to generate the acetylide. Calcium acetylide, known as calcium carbide (CaC₂), is formed differently through the high-temperature reaction of quicklime (CaO) with carbon in an electric arc furnace:
CaO+3C→CaC2+CO \mathrm{CaO + 3C \rightarrow CaC_2 + CO}
at temperatures around 2000–2200°C, producing the diacetylide salt Ca²⁺(C₂²⁻).[56][57] Acetylide anions act as potent nucleophiles in organic synthesis, particularly for constructing carbon-carbon bonds to form substituted alkynes. For instance, the anion reacts with primary alkyl halides via SN2 displacement:
HC≡C−+R−X→R−C≡CH+X− \mathrm{HC \equiv C^- + R-X \rightarrow R-C \equiv CH + X^-}
This alkylation extends the carbon chain and is a cornerstone for synthesizing longer-chain terminal alkynes from acetylene. Historically, calcium carbide's role ties directly to acetylene production, as it hydrolyzes with water to liberate acetylene gas (CaC₂ + 2H₂O → C₂H₂ + Ca(OH)₂), enabling portable generation for early 20th-century applications in lighting and welding.[58]

Hydrogenation

Hydrogenation of acetylene involves the addition of hydrogen across the triple bond, typically catalyzed by metals, to produce ethylene or ethane. Selective hydrogenation to ethylene is achieved using palladium-based catalysts, often modified to prevent over-hydrogenation. For instance, palladium catalysts poisoned with carbon monoxide or alloyed with silver exhibit high selectivity, achieving up to 99% yield of ethylene under controlled conditions.[59][60][61] Full hydrogenation to ethane proceeds readily with nickel catalysts, such as Raney nickel, at room temperature and atmospheric pressure. Thermodynamics strongly favor the over-hydrogenation step from ethylene to ethane due to the exothermicity of the second addition, making selectivity challenging without catalyst modification.[62][63] In industrial settings, selective hydrogenation is crucial for purifying ethylene streams from steam cracking processes, where acetylene impurities below 1% must be removed to prevent poisoning of downstream polymerization catalysts. The reaction mechanism proceeds via a surface vinyl intermediate formed by the addition of atomic hydrogen to adsorbed acetylene, followed by further hydrogenation to ethylene.[64][65][66] For laboratory-scale partial hydrogenation, Lindlar's catalyst—palladium on calcium carbonate poisoned with lead—provides kinetic control to yield alkenes from alkynes via syn addition of hydrogen; for acetylene, it produces ethylene (which has no stereoisomers), while it is particularly effective for internal alkynes to give cis-alkenes with high stereoselectivity.[67]

Applications

Welding and cutting

Acetylene serves as a primary fuel gas in oxy-acetylene welding and cutting, where it is combined with oxygen to generate a high-temperature flame for melting and joining metals or severing them through oxidation.[68] This process, known as oxy-fuel welding and cutting, relies on the combustion of acetylene (C₂H₂) with oxygen (O₂) in specialized torches to achieve precise control over heat application.[69] The oxy-acetylene flame reaches a temperature of approximately 3,300 °C when burned with pure oxygen, the highest among common hydrocarbon fuel gases, due to the high energy stored in acetylene's carbon-carbon triple bond, which releases substantial heat upon combustion.[70] This intense heat enables efficient melting of base metals and filler rods in welding, while in cutting, the flame preheats the metal surface to its ignition temperature of around 1,000 °C, after which a high-velocity jet of pure oxygen oxidizes the heated metal, forming iron oxide slag that is blown away to create a clean cut.[68] The process is particularly effective for thicknesses ranging from thin sheets to up to 250 mm in steel, with acetylene's rapid preheat time—about one-third that of propane—minimizing distortion and heat-affected zones.[69][68] Key advantages of acetylene in these applications include its portability, as the equipment consists of compact cylinders and lightweight torches that require no external power source, making it ideal for field repairs and remote sites.[71] It is also versatile, suitable for welding both ferrous metals like steel and cast iron, as well as non-ferrous metals such as aluminum, copper, and stainless steel, due to the ability to adjust the flame characteristics.[71] Three primary flame types are used: the carburizing (reducing) flame, with excess acetylene for adding carbon to the weld pool and preventing oxidation in certain alloys; the neutral flame, achieving a balanced oxygen-acetylene ratio for clean, efficient welding of most steels; and the oxidizing flame, with excess oxygen for faster cutting or oxidizing welds in applications like brass.[71][68] Globally, approximately 20% to 30% of produced acetylene is consumed in welding and cutting operations, though this share is declining due to the adoption of cheaper alternatives like propane and advanced processes such as plasma cutting.[72] Despite this, acetylene remains preferred in scenarios demanding the highest flame temperatures and quickest preheats, particularly in metal fabrication and repair industries.[68]

Chemical synthesis

Acetylene serves as a versatile building block in the synthesis of various industrial chemicals and polymers due to its high reactivity and ability to undergo addition and cyclization reactions. In particular, it is employed in the production of vinyl chloride monomer (VCM), which is polymerized to form polyvinyl chloride (PVC), a widely used plastic. The process involves the hydrochlorination of acetylene with hydrogen chloride over a mercuric chloride catalyst supported on activated carbon, yielding VCM in high selectivity. This route remains significant in regions like China, where over 70% of PVC production relies on acetylene-derived VCM.[73][74] Another key application is the thermal decomposition of acetylene to produce acetylene black, a high-purity form of carbon black valued for its conductivity and low ash content. This exothermic process occurs at temperatures above 800°C without oxygen, directly converting acetylene gas into finely divided carbon particles and hydrogen. Acetylene black is essential in lithium-ion batteries, rubber reinforcements, and dry cell electrodes.[75][76] Acetylene is also a precursor to 1,4-butanediol (BDO) via the Reppe process, involving sequential carbonylation and hydrogenation steps. BDO is cyclized to tetrahydrofuran (THF), a solvent, or used to produce polytetramethylene ether glycol (PTMEG) for spandex fibers and polyurethanes. BASF continues to operate this acetylene-based route for BDO production, highlighting its industrial relevance despite alternative pathways.[77][78] The Reppe processes, developed in the mid-20th century, exemplify acetylene's utility in catalytic transformations under high pressure. One prominent example is the carbonylation of acetylene with carbon monoxide and water to form acrylic acid, using nickel carbonyl catalysts at 200–250°C and 50–100 bar, providing an atom-efficient route independent of petroleum feedstocks. Additionally, Reppe's high-pressure cyclization of acetylene with hydrogen cyanide yields pyridine derivatives, such as through trimerization variants, serving as intermediates for agrochemicals and pharmaceuticals.[52] Globally, approximately 40% of acetylene production is directed toward chemical synthesis, underscoring its role in value-added products. However, demand has declined in Western markets due to the shift toward cheaper ethylene-based routes for derivatives like VCM and acrylic acid, though acetylene retains niche importance in regions with abundant calcium carbide.[79][80] In emerging applications, acetylene contributes to fine chemicals, including the synthesis of vitamin B1 (thiamine) through acetylide intermediates like α-acetyl-γ-butyrolactone, formed via ethynylation of ketones. Acetylide anions, generated by deprotonation of acetylene, enable C-C bond formation in pharmaceutical synthesis, such as alkylation steps for complex molecules. These uses highlight acetylene's potential in high-value, low-volume sectors despite competition from bio-based alternatives.[81][82]

Historical uses

In the late 19th and early 20th centuries, acetylene gas was widely employed for illumination due to its bright, white flame produced by combustion with oxygen. Acetylene lamps illuminated theaters, providing a compact and intense light source superior to oil lamps or limelight for stage effects during performances from the 1890s to the 1920s.[83] These lamps were also used in lighthouses as beacons, where the gas's reliability in remote locations made it ideal for maritime navigation until the widespread adoption of electricity in the 1920s.[84] Similarly, portable acetylene bicycle lamps became popular starting in 1897, offering cyclists a self-contained, brighter alternative to oil lamps for nighttime travel, though they required regular carbide replenishment.[85] By the 1920s, the rise of electric incandescent bulbs, which were safer and more convenient, largely supplanted acetylene lighting across these applications.[86] During World War I, acetylene found military applications in signaling and illumination. Portable acetylene flash lanterns, such as the Colt model, were used by troops for night-time communication, producing controlled bursts of light via a key mechanism to transmit Morse code signals without revealing positions. U.S. Signal Corps field acetylene lamps, manufactured by J.B. Colt Co., equipped soldiers with reliable, compact devices for battlefield coordination and flares, enhancing visibility in trenches and during operations.[87] Acetylene played a key role in early synthetic rubber production. In the 1930s, DuPont developed neoprene (polychloroprene) through the dimerization of acetylene to form monovinylacetylene, followed by chlorination and polymerization, marking one of the first commercial uses of acetylene as a chemical feedstock for elastomers resistant to oil and heat.[88] This process, initiated in 1931, relied on acetylene's reactivity to build the chloroprene monomer essential for neoprene's properties.[89] Prior to the 1940s, incomplete combustion of acetylene was a primary method for producing lampblack, a fine carbon pigment used in inks and artist materials. The process involved controlled burning of acetylene gas to deposit pure black soot, valued for its opacity and permanence in printing inks and lacquers, as practiced since ancient times but industrialized with hydrocarbons like acetylene for finer particles.[90] This acetylene-derived lampblack provided high-quality pigmentation for documents and artwork until furnace processes for carbon black emerged.[91] The historical prominence of acetylene waned after World War II as petrochemical advancements favored cheaper alternatives. By the 1960s, acetylene's use as a chemical feedstock peaked at around 80% of production but declined sharply due to the development of processes based on low-cost alkenes like ethylene and propylene, which offered more economical routes for vinyls, rubbers, and other derivatives.

Niche applications

Acetylene serves as a calibration source in atomic spectroscopy due to the sharp emission lines produced in oxyacetylene flames, particularly the OH rotational bands, which enable precise wavelength calibration for prism spectrometers in the infrared region.[92] These lines provide a series of strong, well-defined features that extend calibration to longer wavelengths, offering advantages over traditional sources like mercury or argon lamps for certain analytical setups.[92] In materials production, acetylene undergoes thermal decomposition in the K-12 process to yield high-structure carbon black, a specialized form valued for its conductivity and reinforcement properties. This continuous decomposition occurs at atmospheric pressure and temperatures of 800–1000°C in water-cooled retorts, producing carbon black suitable for enhancing tire compounds, such as bladder formulations requiring 30–40% addition for optimal electrical performance.[93] Similarly, acetylene black contributes to lithium-ion battery electrodes by improving electron conductivity and structural integrity in active material layers.[94] Emerging applications include acetylene's role in carbon nanotube synthesis via arc discharge methods, where it acts as a carbon precursor in the presence of iron catalysts to produce narrow-diameter multi-walled nanotubes. The addition of acetylene to the buffer gas during arc discharge influences nanotube morphology, promoting aligned growth and reducing amorphous carbon formation for advanced nanomaterials.[95] Post-2020 developments have expanded acetylene's utility in pharmaceutical intermediates, such as through gold(I)-catalyzed vinylation reactions with o-allylphenols to form chromane scaffolds, and homologation of alkenes using acetylene as a C₂ feedstock for alkyl borane intermediates in drug synthesis.[96][97] In green chemistry, acetylene holds potential as a C1 feedstock for sustainable chemical production, enabling catalytic transformations into value-added products like acrylic acid or vinyl acetate with reduced reliance on petroleum-derived routes. Recent advancements emphasize electro-valorization and carboxylation processes using CO₂ to convert acetylene into C4 chemicals without salt waste, aligning with circular economy principles.[52][98]

Safety and Handling

Hazards

Acetylene is extremely flammable, with explosive limits ranging from 2.5% to 100% in air, making it capable of igniting and propagating explosions over a wider concentration range than most hydrocarbons.[99][100] The high energy release during combustion stems from the triple bond in its molecular structure, enabling detonation velocities of approximately 1890 m/s under certain conditions.[101] This broad flammability contributes to severe fire and explosion risks, particularly in confined spaces where vapors can accumulate and flash back to ignition sources.[102] As an endothermic compound with a standard enthalpy of formation (ΔH_f°) of +227 kJ/mol, acetylene is inherently unstable and can decompose explosively when subjected to pressures above 2 bar (approximately 15 psig) without stabilizers like acetone.[103][104] This decomposition releases significant heat and pressure, potentially leading to violent ruptures of containers or pipelines, especially if heated or shocked.[102] Acetylene acts primarily as a simple asphyxiant, displacing oxygen and causing dizziness, headache, and unconsciousness at concentrations above 10% in air, with an LC50 for inhalation exceeding 10,000 ppm in animal models.[100][102] Commercial acetylene often contains impurities such as phosphine, which imparts a characteristic garlic-like odor and can irritate the eyes and respiratory tract at levels above 1000 ppm.[105] Chronic exposure to these impurities has been linked to neurological effects, including weakness and central nervous system depression.[106]

Storage and transportation

Acetylene is stored in specially designed cylinders that contain a porous monolithic mass saturated with acetone, in which the gas is dissolved to prevent the formation of free gaseous pockets that could lead to instability.[70] This dissolution allows safe storage at pressures up to approximately 15 bar (217 psi), as pure acetylene gas becomes unstable and prone to explosive decomposition above 2 bar (29 psi) without a solvent.[107] Cylinders must be kept in a well-protected, well-ventilated, and dry location, at least 20 feet (6.1 m) from highly combustible materials such as oil, grease, or flammable liquids, to minimize fire risks.[108] Additionally, acetylene cylinders should be separated from oxygen or other oxidizers by at least 20 feet or by a noncombustible barrier at least 5 feet high with a half-hour fire rating.[109] For transportation, acetylene is classified under UN 1001 as a Division 2.1 flammable gas by the U.S. Department of Transportation (DOT), and it must be shipped exclusively in approved cylinders containing dissolved gas in acetone, as transporting pure acetylene is prohibited.[110] Cylinders are limited to a maximum pressure of 250 psig and must be transported in an upright position, securely fastened to prevent tipping or rolling, and kept away from sources of heat, ignition, or direct sunlight to avoid decomposition.[99] Protective valve caps must remain in place during transit, and vehicles should be equipped with proper ventilation to dissipate any potential leaks.[111] Best practices for handling include ensuring adequate ventilation in storage and work areas to prevent accumulation of the gas, which is lighter than air and can form explosive mixtures.[112] Leaks should be detected using soapy water applied to connections rather than open flames or sparks, and cylinders must always be stored and used with the valve end upright to maintain the integrity of the porous filler and solvent.[70] Acetylene must be kept separate from oxidizers at all times during storage and transportation to avoid accidental ignition.[113] To prevent incidents such as flashbacks, flashback arrestors must be installed in fuel gas lines between the regulator and torch, as required by OSHA standard 1910.253 for oxygen-fuel gas systems.[108] Personnel handling acetylene must receive training on safe storage, transportation, and usage procedures in accordance with OSHA 1910.253, including cylinder inspection, securement, and emergency response protocols.[114]

Regulatory considerations

Acetylene is listed on the U.S. Environmental Protection Agency's (EPA) Toxic Substances Control Act (TSCA) Inventory as an active chemical substance, subjecting its manufacture, import, and processing to TSCA reporting and recordkeeping requirements under 40 CFR Part 704. In the European Union, acetylene is registered under the REACH Regulation (EC) No 1907/2006. The Occupational Safety and Health Administration (OSHA) does not establish a specific permissible exposure limit (PEL) for acetylene. The National Institute for Occupational Safety and Health (NIOSH) recommends a ceiling exposure limit of 2500 ppm (2662 mg/m³).[115] Environmentally, acetylene has a global warming potential (GWP) of 0 over a 100-year horizon relative to CO2, as it is not classified as a significant greenhouse gas in IPCC assessments. However, as a volatile organic compound (VOC), it acts as an ozone precursor, contributing to ground-level ozone formation in the troposphere when reacting with NOx under sunlight, which is regulated under the U.S. Clean Air Act. Wastewater from acetylene production, often containing calcium salts and organic residues from calcium carbide processes, is regulated under the Clean Water Act (CWA) through National Pollutant Discharge Elimination System (NPDES) permits, with effluent limitations for the organic chemicals manufacturing sector outlined in 40 CFR Part 414 to control discharges of biochemical oxygen demand, total suspended solids, and priority pollutants. Efforts to promote sustainable acetylene production aim to reduce emissions from calcium carbide-based methods, which account for over 80% of global supply and generate significant CO2. No major bans on acetylene exist globally, but enhanced monitoring of VOC emissions from its production and use is required under frameworks like the U.S. EPA's New Source Performance Standards (40 CFR Part 60) and EU Industrial Emissions Directive (2010/75/EU), focusing on fugitive leaks and combustion exhaust. Global standards for acetylene purity are specified by the European Industrial Gases Association (EIGA) in Document 240, requiring commercial-grade acetylene to exceed 99.5% purity, with limits on impurities like hydrogen sulfide and phosphine generally below 10 ppmv for safe industrial use, depending on the specific grade.[116] For maritime shipping, the International Maritime Dangerous Goods (IMDG) Code classifies dissolved acetylene (UN 1001) as a flammable gas (Class 2.1) with special provisions for solvent-free variants and mandates incident reporting under Chapter 1.4, requiring notifications to the IMO for spills, fires, or exposures exceeding thresholds to ensure rapid response and regulatory compliance.

References

  1. Acetylene | C2H2 | CID 6326 - PubChem - NIH
  2. None
  3. Acetylene | Podcast | Chemistry World
  4. (PDF) Edmond Davy - ResearchGate
  5. [PDF] Acetylene and Its Polymers 150+ Years of History
  6. Commercialization of Calcium Carbide and Acetylene - Landmark
  7. Carbide Lamps | National Museum of American History
  8. History of Automotive Headlamps: From Acetylene to LEDs
  9. [PDF] Carbide and Electric Cap Lamps - Mining History Association
  10. https://chem.libretexts.org/Bookshelves/Organic_Chemistry/Organic_Chemistry_(OpenStax
  11. Active Thermochemical Tables: Sequential Bond Dissociation ...
  12. [PDF] Bond Dissocation Energies (kcal/mol) - The Sarpong Group
  13. C2H2 - Acetylene (Ethyne), CAS# 74-86-2 - Gastech Australia
  14. Acetylene - the NIST WebBook
  15. ICSC 0089 - ACETYLENE - INCHEM
  16. Acetylene (CAS 74-86-2) - Chemical & Physical Properties by Cheméo
  17. The abundance of acetylene in the atmosphere of Jupiter
  18. Hydrocarbons in Neptune's stratosphere from Voyager infrared ...
  19. Ultraviolet Spectrometer Observations of Uranus - Science
  20. Seasonal Stratospheric Photochemistry on Uranus and Neptune
  21. The Composition and Chemistry of Titan's Atmosphere - PMC - NIH
  22. The Composition and Chemistry of Titan's Atmosphere
  23. Photochemical activity of Titan's low-altitude condensed haze - Nature
  24. Discovery of interstellar acetylene - NASA ADS
  25. Role of Acetylene in the Chemical Evolution of Carbon Complexity
  26. Detection of acetylene in the infrared spectrum of comet Hyakutake
  27. Production of Acetylene and Acetylene-based Chemicals from Coal
  28. Calcium Carbide for Acetylene Production - Rexarc
  29. Towards carbon neutrality of calcium carbide-based acetylene ...
  30. [PDF] PRODUCTION OF CALCIUM CARBIDE IN A PLASMA-JET
  31. [PDF] DOC241_23_Purification, Compression and Drying of Acetylene
  32. [PDF] Acetylene Production from Calcium Carbide - Intratec.us
  33. Acetylene Market By Production Route (Calcium Carbide ...
  34. Life cycle assessment of acetylene production from calcium carbide ...
  35. None
  36. Transition-Metal Catalysts for Methane Dehydroaromatization (Mo ...
  37. Non-oxidative ethane dehydrogenation reaction over molybdenum ...
  38. [PDF] oc 2 7 1969 --- -- - INFO - Oak Ridge National Laboratory
  39. Efficient methane-to-acetylene conversion using low-current arcs - NIH
  40. Technical challenges for developing thermal methane cracking in ...
  41. Carbon–neutral hydrogen production by catalytic methane ...
  42. Chapter 4: Conversion of Methane to Acetylene - Books
  43. Catalytic molten metals for the direct conversion of methane to ...
  44. Catalytic Reactions of Acetylene: A Feedstock for the Chemical ...
  45. [PDF] 2025 Submission from the United States of America
  46. Current status and perspective of metal-free materials as catalysts in ...
  47. Acidity of Terminal Alkynes - Chemistry Steps
  48. 11.11: Reaction of Acetylide Anions - Chemistry LibreTexts
  49. [PDF] 11.4 Calcium Carbide Manufacturing 11.4.1 General Calcium ... - EPA
  50. Acetylides from Alkynes, and The Substitution Reactions of Acetylides
  51. [PDF] AgPd and CuPd Catalysts for Selective Hydrogenation of Acetylene
  52. [PDF] Highly Selective Acetylene Semihydrogenation Catalyst with ... - OSTI
  53. An Experimental Approach on Industrial Pd-Ag Supported α-Al2O3 ...
  54. Design of efficient supported Pd-Co catalysts for selective ...
  55. Maximise ethylene gain and acetylene selective hydrogenation ...
  56. Catalysts for selective hydrogenation of acetylene: A review
  57. The reaction mechanism and selectivity of acetylene hydrogenation ...
  58. Selective hydrogenation of acetylene - Avantium RDS
  59. Selective semi-hydrogenation of internal alkynes catalyzed by Pd ...
  60. Oxyfuel Cutting - Process and Fuel Gases - TWI Global
  61. How Does the Oxy-fuel Cutting Process Work? - ESAB US
  62. [PDF] Acetylene - Air Products
  63. Oxy-Acetylene Welding Explained | Gas Welding - Fractory
  64. https://www.marketgrowthreports.com/market-reports/acetylene-gas-market-116876
  65. Continuous vinyl chloride monomer production by acetylene ...
  66. Vinyl chloride monomer production | Johnson Matthey
  67. DENKA BLACK | Denka Company Limited
  68. [PDF] ACETYLENE BLACK Clean and rich in Carbon
  69. [PDF] BASF and Acetylene – 70 Years of Reppe Chemistry - OSTI.GOV
  70. A brief description of 1,4-Butanediol synthesis method - ChemicalBook
  71. Acetylene Market | Size, Share, Growth | 2024 - 2030
  72. Acetylene Market 2025 Forecast to 2032
  73. Manufacture of Fine Chemicals from Acetylene 9783110714999 ...
  74. 9.8: Alkylation of Acetylide Anions - Chemistry LibreTexts
  75. Light Sources and Lamps - Theatrecrafts.com
  76. "Dazzler" Bicycle Lamp - Shiloh Museum of Ozark History
  77. Acetylene (Carbide) Bicycle Lamp - Sauk County Historical Society
  78. History of Bicycle Lighting Technology - Sheldon Brown
  79. ww1 us signal corps field acetylene signal lamp - Militaria Zone
  80. Chloroprene - Re-evaluation of Some Organic Chemicals ... - NCBI
  81. The Ten-Year Invention: Neoprene and Du Pont Research, 1930-1939
  82. Lamp Black pigment - Langridge Artist Colours
  83. Carbon Black - Printing Processes and Printing Inks ... - NCBI - NIH
  84. Use of an Oxyacetylene Flame to Calibrate a Prism Spectrometer in ...
  85. [PDF] "Carbon Black". In: Kirk-Othmer Encyclopedia of Chemical Technology
  86. The Often-Overlooked Essential Material in Lithium-ion Batteries
  87. Effect of acetylene in buffer gas on the microstructures of carbon ...
  88. Gold(I)-Catalyzed Intermolecular Aryloxyvinylation with Acetylene Gas
  89. Homologation of Alkenes Using Acetylene as a C 2 Feedstock
  90. Carboxylation of Acetylene without Salt Waste: Green Synthesis of ...
  91. [PDF] Acetylene - Hazardous Substance Fact Sheet
  92. Acetylene
  93. [PDF] Explosive decomposition of acetylene in pipelines - IChemE
  94. LCSS: ACETYLENE
  95. Acetylene - the NIST WebBook
  96. None
  97. [PDF] Laboratory Chemical Safety Summaries | LCSSs - EPFL
  98. Phosphine (PIM 865) - INCHEM
  99. [PDF] Facts About Acetylene - BOC
  100. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.253
  101. [PDF] OSHA FACT SHEET Compressed Gas Safety ... - Oregon OSHA
  102. UN/NA 1001 - CAMEO Chemicals - NOAA
  103. [PDF] Acetylene - SAFETY DATA SHEET
  104. [PDF] EHS-323 COMPRESSED GAS CYLINDER GUIDELINES
  105. How to Store Oxygen and Acetylene Cylinders - WestAir Gases
  106. https://www.osha.gov/laws-regs/standardinterpretations/1992-01-28
User Avatar
No comments yet.